// This method converts view state information stored within the ViewStateManager node back as
// attached properties on corresponding activity nodes.
// It is called when workflow definition is being deserialized from a string.
// inputReader - Nodestream that may have all view state information in the ViewStateManager node at the end of workflow definition.
// The reader is positioned at the begining of the workflow definition.
// idManager - This component issues running sequence numbers for IdRef.
// viewStateManager - (output) ViewStateManager object instance deserialized from the workflow definition.
// Result - Node stream positioned at the begining of the workflow definition with view state related information
// appearing as attached properties on activities. The ViewStateManager nodes are removed from the stream.
// Implementation logic:
// 1. Scan the input nodestream for ViewStateManager node.
// 2. If ViewStateManager node is found, store Id and corresponding attached property nodes
// in viewStateInfo dictionary. Otherwise return early.
// 3. Walk activity nodes in the workflow definition and apply viewstate related attached properties (from
// viewStateInfo dictionary) to each node.
// 4. If multiple activities have same IdRef values then corresponding viewstate related attached properties
// (from viewStateInfo dictionary) are applied to the first of those activities. The other activities with duplicate
// IdRef values do not get view state information.
public static XamlReader ConvertViewStateToAttachedProperties(XamlReader inputReader, ViewStateIdManager idManager, out Dictionary<string, SourceLocation> viewStateSourceLocationMap)
{
int idRefLineNumber = 0;
int idRefLinePosition = 0;
bool shouldWriteIdRefEndMember = false;
XamlReader retVal = null;
// Xaml member definition for IdRef. Used to identify existing IdRef properties in the input nodestream.
XamlMember idRefMember = new XamlMember(IdRef, GetIdRef, SetIdRef, inputReader.SchemaContext);
// Dictionary containing Ids and corresponding viewstate related
// attached property nodes. Populated by StripViewStateElement method.
Dictionary<string, XamlNodeList> viewStateInfo = null;
XamlReader workflowDefinition = StripViewStateElement(inputReader, out viewStateInfo, out viewStateSourceLocationMap);
// This is used to keep track of duplicate IdRefs in the workflow definition.
HashSet<string> idRefsSeen = new HashSet<string>();
// If the inputReader did not have a ViewStateManager node (4.0 format)
// return early.
if (viewStateInfo == null)
{
retVal = workflowDefinition;
}
else
{
// Stack to track StartObject/GetObject and EndObject nodes.
Stack<Frame> stack = new Stack<Frame>();
// Output node list.
XamlNodeList mergedNodeList = new XamlNodeList(workflowDefinition.SchemaContext);
bool inIdRefMember = false;
using (XamlWriter mergedNodeWriter = mergedNodeList.Writer)
{
IXamlLineInfo lineInfo = workflowDefinition as IXamlLineInfo;
IXamlLineInfoConsumer lineInfoComsumer = mergedNodeWriter as IXamlLineInfoConsumer;
bool shouldPassLineInfo = lineInfo != null && lineInfo.HasLineInfo && lineInfoComsumer != null && lineInfoComsumer.ShouldProvideLineInfo;
while (workflowDefinition.Read())
{
bool skipWritingWorkflowDefinition = false;
switch (workflowDefinition.NodeType)
{
case XamlNodeType.StartObject:
stack.Push(new Frame { Type = workflowDefinition.Type });
break;
case XamlNodeType.GetObject:
stack.Push(new Frame { Type = null });
break;
case XamlNodeType.StartMember:
// Track when the reader enters IdRef. Skip writing the start
// node to the output nodelist until we check for duplicates.
if (workflowDefinition.Member.Equals(idRefMember))
{
inIdRefMember = true;
skipWritingWorkflowDefinition = true;
if (shouldPassLineInfo)
{
idRefLineNumber = lineInfo.LineNumber;
idRefLinePosition = lineInfo.LinePosition;
}
}
break;
case XamlNodeType.Value:
if (inIdRefMember)
{
string idRef = workflowDefinition.Value as string;
if (!string.IsNullOrWhiteSpace(idRef))
{
// If IdRef value is a duplicate then do not associate it with
// the stack frame (top of stack == activity node with IdRef member on it).
if (idRefsSeen.Contains(idRef))
{
stack.Peek().IdRef = null;
}
// If the IdRef value is unique then associate it with the
// stack frame and also write its value into the output nodestream.
else
{
stack.Peek().IdRef = idRef;
idManager.UpdateMap(idRef);
idRefsSeen.Add(idRef);
if (shouldPassLineInfo)
{
lineInfoComsumer.SetLineInfo(idRefLineNumber, idRefLinePosition);
}
mergedNodeWriter.WriteStartMember(idRefMember);
if (shouldPassLineInfo)
{
lineInfoComsumer.SetLineInfo(lineInfo.LineNumber, lineInfo.LinePosition);
}
mergedNodeWriter.WriteValue(idRef);
shouldWriteIdRefEndMember = true;
}
}
// Don't need to write IdRef value into the output
// nodestream. If the value was valid, it would have been written above.
skipWritingWorkflowDefinition = true;
}
break;
case XamlNodeType.EndMember:
// Exit IdRef node. Skip writing the EndMember node, we would have done
// it as part of reading the IdRef value.
if (inIdRefMember)
{
inIdRefMember = false;
skipWritingWorkflowDefinition = true;
if (shouldWriteIdRefEndMember)
{
shouldWriteIdRefEndMember = false;
if (shouldPassLineInfo)
{
lineInfoComsumer.SetLineInfo(lineInfo.LineNumber, lineInfo.LinePosition);
}
mergedNodeWriter.WriteEndMember();
}
}
break;
case XamlNodeType.EndObject:
Frame frameObject = stack.Pop();
// Before we exit the end of an object, check if it had IdRef
// associated with it. If it did, look-up viewStateInfo for viewstate
// related attached property nodes and add them to the output nodelist.
if (!string.IsNullOrWhiteSpace(frameObject.IdRef))
{
XamlNodeList viewStateNodeList;
if (viewStateInfo.TryGetValue(frameObject.IdRef, out viewStateNodeList))
{
XamlReader viewStateReader = viewStateNodeList.GetReader();
IXamlLineInfo viewStateLineInfo = viewStateReader as IXamlLineInfo;
bool viewStateShouldPassLineInfo = viewStateLineInfo != null && viewStateLineInfo.HasLineInfo && lineInfoComsumer != null && lineInfoComsumer.ShouldProvideLineInfo;
while (viewStateReader.Read())
{
if (viewStateShouldPassLineInfo)
{
lineInfoComsumer.SetLineInfo(viewStateLineInfo.LineNumber, viewStateLineInfo.LinePosition);
}
mergedNodeWriter.WriteNode(viewStateReader);
}
}
}
break;
}
if (!skipWritingWorkflowDefinition)
{
if (shouldPassLineInfo)
{
lineInfoComsumer.SetLineInfo(lineInfo.LineNumber, lineInfo.LinePosition);
}
mergedNodeWriter.WriteNode(workflowDefinition);
}
}
}
retVal = mergedNodeList.GetReader();
}
return retVal;
}
// This method collects view state attached properties and generates a Xaml node stream
// with all view state information appearing within the ViewStateManager node.
// It is called when workflow definition is being serialized to string.
// inputReader - Nodestream with view state information as attached properties on the activity nodes.
// The reader is positioned at the begining of the workflow definition.
// idManager - This component issues running sequence numbers for IdRef.
// Result - Node stream positioned at the begining of the workflow definition with a
// ViewStateManager node containing all view state information.
// Implementation logic:
// 1. Scan the input nodestream Objects for attached properties that need to be converted (VirtualizedContainerService.HintSize and WorkflowViewStateService.ViewState).
// 2. If the Object had a IdRef value then use it otherwise generate a new value.
// 3. Store idRef value and corresponding viewstate related attached property nodes (from step 1)
// in the viewStateInfo dictionary.
// 4. Use the viewStateInfo dictionary to generate ViewStateManager node which is then inserted
// into the end of output nodestream.
public static XamlReader ConvertAttachedPropertiesToViewState(XamlObjectReader inputReader, ViewStateIdManager idManager)
{
// Stack to track StartObject/GetObject and EndObject nodes.
Stack<Frame> stack = new Stack<Frame>();
XamlMember viewStateManager = new XamlMember(ViewStateManager, GetViewStateManager, SetViewStateManager, inputReader.SchemaContext);
XamlMember idRefMember = new XamlMember(IdRef, GetIdRef, SetIdRef, inputReader.SchemaContext);
// Xaml member corresponding to x:Class property of the workflow definition. Used to find x:Class value in the node stream.
XamlMember activityBuilderName = new XamlMember(typeof(ActivityBuilder).GetProperty("Name"), inputReader.SchemaContext);
string activityBuilderTypeName = typeof(ActivityBuilder).Name;
// Dictionary to keep track of IdRefs and corresponding viewstate related
// attached property nodes.
Dictionary<string, XamlNodeList> viewStateInfo = new Dictionary<string, XamlNodeList>();
// Output node list
XamlNodeList workflowDefinition = new XamlNodeList(inputReader.SchemaContext);
using (XamlWriter workflowDefinitionWriter = workflowDefinition.Writer)
{
bool design2010NamespaceFound = false;
bool inIdRefMember = false;
bool inxClassMember = false;
bool skipWritingWorkflowDefinition = false;
bool skipReadingWorkflowDefinition = false;
string xClassName = null;
while (skipReadingWorkflowDefinition || inputReader.Read())
{
skipWritingWorkflowDefinition = false;
skipReadingWorkflowDefinition = false;
switch (inputReader.NodeType)
{
case XamlNodeType.NamespaceDeclaration:
if (inputReader.Namespace.Namespace.Equals(NameSpaces.Design2010, StringComparison.Ordinal))
{
design2010NamespaceFound = true;
}
break;
case XamlNodeType.StartObject:
// Save the Xaml type and clr object on the stack frame. These are used later to generate
// IdRef values and attaching the same to the clr object.
stack.Push(new Frame() { Type = inputReader.Type, InstanceObject = inputReader.Instance });
// If the design2010 namespace was not found add the namespace node
// before the start object is written out.
if (!design2010NamespaceFound)
{
workflowDefinitionWriter.WriteNamespace(new NamespaceDeclaration(NameSpaces.Design2010, NameSpaces.Design2010Prefix));
design2010NamespaceFound = true;
}
break;
case XamlNodeType.GetObject:
// Push an empty frame to balance the Pop operation when the EndObject node
// is encountered.
stack.Push(new Frame() { Type = null });
break;
case XamlNodeType.StartMember:
// Track when we enter IdRef member so that we can save its value.
if (inputReader.Member.Equals(idRefMember))
{
inIdRefMember = true;
}
// Track when we enter x:Class member so that we can save its value.
else if (inputReader.Member.Equals(activityBuilderName))
{
inxClassMember = true;
}
// Start of VirtualizedContainerService.HintSize or WorkflowViewStateService.ViewState property.
else if (IsAttachablePropertyForConvert(inputReader))
{
// The top of stack here corresponds to the activity on which
// the above properties are attached.
if (stack.Peek().AttachedPropertyNodes == null)
{
stack.Peek().AttachedPropertyNodes = new XamlNodeList(inputReader.SchemaContext);
}
// Write the attached property's xaml nodes into the stack.
XamlReader subTreeReader = inputReader.ReadSubtree();
XamlWriter attachedPropertyWriter = stack.Peek().AttachedPropertyNodes.Writer;
while (subTreeReader.Read())
{
attachedPropertyWriter.WriteNode(subTreeReader);
}
// The subtree reader loop put us at the begining of the next node in the input stream.
// So skip reading/writing it out just yet.
skipReadingWorkflowDefinition = true;
skipWritingWorkflowDefinition = true;
}
break;
case XamlNodeType.Value:
// Read and save IdRef/x:Class member values.
// Also update idManager to keep track of prefixes and ids seen.
if (inIdRefMember)
{
string idRef = inputReader.Value as string;
stack.Peek().IdRef = idRef;
idManager.UpdateMap(idRef);
}
else if (inxClassMember)
{
xClassName = inputReader.Value as string;
idManager.UpdateMap(xClassName);
}
break;
case XamlNodeType.EndMember:
// Exit IdRef/x:Class member state.
if (inIdRefMember)
{
inIdRefMember = false;
}
else if (inxClassMember)
{
inxClassMember = false;
}
break;
case XamlNodeType.EndObject:
// Remove an item from the stack because we encountered the end of an object definition.
Frame frameObject = stack.Pop();
// If the object had (viewstate related) attached properties we need to save them
// into the viewStateInfo dictionary.
if (frameObject.AttachedPropertyNodes != null)
{
frameObject.AttachedPropertyNodes.Writer.Close();
// If the object didn't have IdRef, generate a new one.
if (string.IsNullOrWhiteSpace(frameObject.IdRef))
{
// Use the object type name (or x:Class value) to generate a new id.
if (frameObject.Type != null)
{
string prefix = frameObject.Type.Name;
if (frameObject.Type.UnderlyingType != null)
{
prefix = frameObject.Type.UnderlyingType.Name;
}
if (string.CompareOrdinal(prefix, activityBuilderTypeName) == 0 && !string.IsNullOrWhiteSpace(xClassName))
{
frameObject.IdRef = idManager.GetNewId(xClassName);
}
else
{
frameObject.IdRef = idManager.GetNewId(prefix);
}
}
else //Fallback to generating a guid value.
{
frameObject.IdRef = Guid.NewGuid().ToString();
}
// Since we didn't see a IdRef on this object, insert the generated
// viewstate id into the output Xaml node-stream.
workflowDefinitionWriter.WriteStartMember(idRefMember);
workflowDefinitionWriter.WriteValue(frameObject.IdRef);
workflowDefinitionWriter.WriteEndMember();
// Save the generated idRef on the corresponding clr object as well.
if (frameObject.InstanceObject != null)
{
WorkflowViewState.SetIdRef(frameObject.InstanceObject, frameObject.IdRef);
}
}
viewStateInfo[frameObject.IdRef] = frameObject.AttachedPropertyNodes;
}
// We're at the end of input nodestream and have collected data in viewStateInfo
// so we need to create and insert the ViewStateManager nodes into the output nodestream.
if (stack.Count == 0 && viewStateInfo.Count > 0)
{
XamlNodeList viewStateManagerNodeList = CreateViewStateManagerNodeList(viewStateInfo, inputReader.SchemaContext);
XamlReader viewStateManagerNodeReader = viewStateManagerNodeList.GetReader();
// Insert the ViewStateManager nodes into the output node stream.
workflowDefinitionWriter.WriteStartMember(viewStateManager);
while (viewStateManagerNodeReader.Read())
{
workflowDefinitionWriter.WriteNode(viewStateManagerNodeReader);
}
workflowDefinitionWriter.WriteEndMember(); // viewStateManager
}
break;
}
if (!skipWritingWorkflowDefinition)
{
workflowDefinitionWriter.WriteNode(inputReader);
}
}
}
return workflowDefinition.GetReader();
}
public WorkflowDesigner()
{
// create our perf trace provider first
this.perfEventProvider = new DesignerPerfEventProvider();
this.idManager = new ViewStateIdManager();
this.context = new EditingContext();
this.ModelSearchService = new ModelSearchServiceImpl(this);
this.context.Items.SetValue(new ReadOnlyState { IsReadOnly = false });
this.view = new Grid();
this.view.Focusable = false;
//add the resource dictionary to application resource so every component could reference it
if (Application.Current == null)
{
//create an application if it doesn't exist, make sure it will not shutdown after windows being shut down
Application app = new Application();
app.ShutdownMode = ShutdownMode.OnExplicitShutdown;
}
Fx.Assert(Application.Current != null, "Application and resources must be there");
Application.Current.Resources.MergedDictionaries.Add(WorkflowDesignerColors.FontAndColorResources);
Application.Current.Resources.MergedDictionaries.Add(WorkflowDesignerIcons.IconResourceDictionary);
AttachedPropertiesService propertiesService = new AttachedPropertiesService();
this.context.Services.Publish(typeof(AttachedPropertiesService), propertiesService);
undoEngine = new UndoEngine(context);
this.context.Services.Publish(typeof(UndoEngine), undoEngine);
undoEngine.UndoCompleted += new EventHandler<UndoUnitEventArgs>(OnUndoCompleted);
this.context.Services.Publish<ValidationService>(this.ValidationService);
this.context.Services.Publish<ObjectReferenceService>(this.ObjectReferenceService);
this.context.Services.Publish<DesignerPerfEventProvider>(this.perfEventProvider);
this.context.Services.Publish<FeatureManager>(new FeatureManager(this.context));
this.context.Services.Publish<DesignerConfigurationService>(new DesignerConfigurationService());
this.context.Services.Subscribe<ICommandService>((s) =>
{
const string addinTypeName = "Microsoft.VisualStudio.Activities.AddIn.WorkflowDesignerAddIn";
if (s != null && s.GetType().FullName.Equals(addinTypeName))
{
DesignerConfigurationService service = this.context.Services.GetService<DesignerConfigurationService>();
if (service != null)
{
service.WorkflowDesignerHostId = WorkflowDesignerHostId.Dev10;
}
}
});
this.context.Services.Subscribe<IVSSqmService>((service) =>
{
const string serviceTypeName = "Microsoft.VisualStudio.Activities.AddIn.VSSqmService";
if (service != null && service.GetType().FullName.Equals(serviceTypeName))
{
DesignerConfigurationService configurationService = this.context.Services.GetService<DesignerConfigurationService>();
if (configurationService != null)
{
configurationService.WorkflowDesignerHostId = WorkflowDesignerHostId.Dev11;
}
}
});
this.Context.Items.Subscribe<ErrorItem>(delegate(ErrorItem errorItem)
{
ErrorView errorView = new ErrorView();
errorView.Message = errorItem.Message;
errorView.Details = errorItem.Details;
errorView.Context = this.Context;
// Clear views
this.view.Children.Clear();
this.view.Children.Add(errorView);
if (this.outlineView != null)
{
this.outlineView.Children.Clear();
}
}
);
this.context.Items.Subscribe<ReadOnlyState>(new SubscribeContextCallback<ReadOnlyState>(OnReadonlyStateChanged));
this.context.Services.Subscribe<IXamlLoadErrorService>(s => this.xamlLoadErrorService = s);
this.PreviewLoad += NamespaceSettingsHandler.PreviewLoadRoot;
this.view.Loaded += (s, e) =>
{
//when view is loaded, check if user did provide his own WindowHelperService - if not, provide a default one
if (!this.context.Services.Contains<WindowHelperService>())
{
IntPtr hWND = IntPtr.Zero;
Window ownerWindow = Window.GetWindow(this.view);
if (null != ownerWindow)
{
WindowInteropHelper helper = new WindowInteropHelper(ownerWindow);
hWND = helper.Handle;
}
this.Context.Services.Publish<WindowHelperService>(new WindowHelperService(hWND));
}
WindowHelperService whs = this.context.Services.GetService<WindowHelperService>();
whs.View = this.view;
//check if workflow command extension item is available - if not, provide default one
if (!this.context.Items.Contains<WorkflowCommandExtensionItem>())
{
WorkflowCommandExtensionItem item = new WorkflowCommandExtensionItem(new DefaultCommandExtensionCallback());
this.context.Items.SetValue(item);
}
ComponentDispatcher.EnterThreadModal += new EventHandler(ComponentDispatcher_EnterThreadModal);
ComponentDispatcher.LeaveThreadModal += new EventHandler(ComponentDispatcher_LeaveThreadModal);
};
this.view.Unloaded += (s, e) =>
{
ComponentDispatcher.EnterThreadModal -= new EventHandler(ComponentDispatcher_EnterThreadModal);
ComponentDispatcher.LeaveThreadModal -= new EventHandler(ComponentDispatcher_LeaveThreadModal);
};
this.view.IsKeyboardFocusWithinChanged += (s, e) =>
{
// The ModelTreeManager is null when there is an active ErrorItem.
// We have nothing to write to text in this case.
if (this.modelTreeManager != null && (bool)e.NewValue == false)
{
if ((FocusManager.GetFocusedElement(this.view) as TextBox) != null)
{
FocusManager.SetFocusedElement(this.view, null);
this.NotifyModelChanged();
}
}
};
}
// This method collects view state attached properties and generates a Xaml node stream
// with all view state information appearing within the ViewStateManager node.
// It is called when workflow definition is being serialized to string.
// inputReader - Nodestream with view state information as attached properties on the activity nodes.
// The reader is positioned at the begining of the workflow definition.
// idManager - This component issues running sequence numbers for IdRef.
// Result - Node stream positioned at the begining of the workflow definition with a
// ViewStateManager node containing all view state information.
// Implementation logic:
// 1. Scan the input nodestream Objects for attached properties that need to be converted (VirtualizedContainerService.HintSize and WorkflowViewStateService.ViewState).
// 2. If the Object had a IdRef value then use it otherwise generate a new value.
// 3. Store idRef value and corresponding viewstate related attached property nodes (from step 1)
// in the viewStateInfo dictionary.
// 4. Use the viewStateInfo dictionary to generate ViewStateManager node which is then inserted
// into the end of output nodestream.
public static XamlReader ConvertAttachedPropertiesToViewState(XamlObjectReader inputReader, ViewStateIdManager idManager)
{
// Stack to track StartObject/GetObject and EndObject nodes.
Stack <Frame> stack = new Stack <Frame>();
XamlMember viewStateManager = new XamlMember(ViewStateManager, GetViewStateManager, SetViewStateManager, inputReader.SchemaContext);
XamlMember idRefMember = new XamlMember(IdRef, GetIdRef, SetIdRef, inputReader.SchemaContext);
// Xaml member corresponding to x:Class property of the workflow definition. Used to find x:Class value in the node stream.
XamlMember activityBuilderName = new XamlMember(typeof(ActivityBuilder).GetProperty("Name"), inputReader.SchemaContext);
string activityBuilderTypeName = typeof(ActivityBuilder).Name;
// Dictionary to keep track of IdRefs and corresponding viewstate related
// attached property nodes.
Dictionary <string, XamlNodeList> viewStateInfo = new Dictionary <string, XamlNodeList>();
// Output node list
XamlNodeList workflowDefinition = new XamlNodeList(inputReader.SchemaContext);
using (XamlWriter workflowDefinitionWriter = workflowDefinition.Writer)
{
bool design2010NamespaceFound = false;
bool inIdRefMember = false;
bool inxClassMember = false;
bool skipWritingWorkflowDefinition = false;
bool skipReadingWorkflowDefinition = false;
string xClassName = null;
while (skipReadingWorkflowDefinition || inputReader.Read())
{
skipWritingWorkflowDefinition = false;
skipReadingWorkflowDefinition = false;
switch (inputReader.NodeType)
{
case XamlNodeType.NamespaceDeclaration:
if (inputReader.Namespace.Namespace.Equals(NameSpaces.Design2010, StringComparison.Ordinal))
{
design2010NamespaceFound = true;
}
break;
case XamlNodeType.StartObject:
// Save the Xaml type and clr object on the stack frame. These are used later to generate
// IdRef values and attaching the same to the clr object.
stack.Push(new Frame()
{
Type = inputReader.Type, InstanceObject = inputReader.Instance
});
// If the design2010 namespace was not found add the namespace node
// before the start object is written out.
if (!design2010NamespaceFound)
{
workflowDefinitionWriter.WriteNamespace(new NamespaceDeclaration(NameSpaces.Design2010, NameSpaces.Design2010Prefix));
design2010NamespaceFound = true;
}
break;
case XamlNodeType.GetObject:
// Push an empty frame to balance the Pop operation when the EndObject node
// is encountered.
stack.Push(new Frame()
{
Type = null
});
break;
case XamlNodeType.StartMember:
// Track when we enter IdRef member so that we can save its value.
if (inputReader.Member.Equals(idRefMember))
{
inIdRefMember = true;
}
// Track when we enter x:Class member so that we can save its value.
else if (inputReader.Member.Equals(activityBuilderName))
{
inxClassMember = true;
}
// Start of VirtualizedContainerService.HintSize or WorkflowViewStateService.ViewState property.
else if (IsAttachablePropertyForConvert(inputReader))
{
// The top of stack here corresponds to the activity on which
// the above properties are attached.
if (stack.Peek().AttachedPropertyNodes == null)
{
stack.Peek().AttachedPropertyNodes = new XamlNodeList(inputReader.SchemaContext);
}
// Write the attached property's xaml nodes into the stack.
XamlReader subTreeReader = inputReader.ReadSubtree();
XamlWriter attachedPropertyWriter = stack.Peek().AttachedPropertyNodes.Writer;
while (subTreeReader.Read())
{
attachedPropertyWriter.WriteNode(subTreeReader);
}
// The subtree reader loop put us at the begining of the next node in the input stream.
// So skip reading/writing it out just yet.
skipReadingWorkflowDefinition = true;
skipWritingWorkflowDefinition = true;
}
break;
case XamlNodeType.Value:
// Read and save IdRef/x:Class member values.
// Also update idManager to keep track of prefixes and ids seen.
if (inIdRefMember)
{
string idRef = inputReader.Value as string;
stack.Peek().IdRef = idRef;
idManager.UpdateMap(idRef);
}
else if (inxClassMember)
{
xClassName = inputReader.Value as string;
idManager.UpdateMap(xClassName);
}
break;
case XamlNodeType.EndMember:
// Exit IdRef/x:Class member state.
if (inIdRefMember)
{
inIdRefMember = false;
}
else if (inxClassMember)
{
inxClassMember = false;
}
break;
case XamlNodeType.EndObject:
// Remove an item from the stack because we encountered the end of an object definition.
Frame frameObject = stack.Pop();
// If the object had (viewstate related) attached properties we need to save them
// into the viewStateInfo dictionary.
if (frameObject.AttachedPropertyNodes != null)
{
frameObject.AttachedPropertyNodes.Writer.Close();
// If the object didn't have IdRef, generate a new one.
if (string.IsNullOrWhiteSpace(frameObject.IdRef))
{
// Use the object type name (or x:Class value) to generate a new id.
if (frameObject.Type != null)
{
string prefix = frameObject.Type.Name;
if (frameObject.Type.UnderlyingType != null)
{
prefix = frameObject.Type.UnderlyingType.Name;
}
if (string.CompareOrdinal(prefix, activityBuilderTypeName) == 0 && !string.IsNullOrWhiteSpace(xClassName))
{
frameObject.IdRef = idManager.GetNewId(xClassName);
}
else
{
frameObject.IdRef = idManager.GetNewId(prefix);
}
}
else //Fallback to generating a guid value.
{
frameObject.IdRef = Guid.NewGuid().ToString();
}
// Since we didn't see a IdRef on this object, insert the generated
// viewstate id into the output Xaml node-stream.
workflowDefinitionWriter.WriteStartMember(idRefMember);
workflowDefinitionWriter.WriteValue(frameObject.IdRef);
workflowDefinitionWriter.WriteEndMember();
// Save the generated idRef on the corresponding clr object as well.
if (frameObject.InstanceObject != null)
{
WorkflowViewState.SetIdRef(frameObject.InstanceObject, frameObject.IdRef);
}
}
viewStateInfo[frameObject.IdRef] = frameObject.AttachedPropertyNodes;
}
// We're at the end of input nodestream and have collected data in viewStateInfo
// so we need to create and insert the ViewStateManager nodes into the output nodestream.
if (stack.Count == 0 && viewStateInfo.Count > 0)
{
XamlNodeList viewStateManagerNodeList = CreateViewStateManagerNodeList(viewStateInfo, inputReader.SchemaContext);
XamlReader viewStateManagerNodeReader = viewStateManagerNodeList.GetReader();
// Insert the ViewStateManager nodes into the output node stream.
workflowDefinitionWriter.WriteStartMember(viewStateManager);
while (viewStateManagerNodeReader.Read())
{
workflowDefinitionWriter.WriteNode(viewStateManagerNodeReader);
}
workflowDefinitionWriter.WriteEndMember(); // viewStateManager
}
break;
}
if (!skipWritingWorkflowDefinition)
{
workflowDefinitionWriter.WriteNode(inputReader);
}
}
}
return(workflowDefinition.GetReader());
}
// This method converts view state information stored within the ViewStateManager node back as
// attached properties on corresponding activity nodes.
// It is called when workflow definition is being deserialized from a string.
// inputReader - Nodestream that may have all view state information in the ViewStateManager node at the end of workflow definition.
// The reader is positioned at the begining of the workflow definition.
// idManager - This component issues running sequence numbers for IdRef.
// viewStateManager - (output) ViewStateManager object instance deserialized from the workflow definition.
// Result - Node stream positioned at the begining of the workflow definition with view state related information
// appearing as attached properties on activities. The ViewStateManager nodes are removed from the stream.
// Implementation logic:
// 1. Scan the input nodestream for ViewStateManager node.
// 2. If ViewStateManager node is found, store Id and corresponding attached property nodes
// in viewStateInfo dictionary. Otherwise return early.
// 3. Walk activity nodes in the workflow definition and apply viewstate related attached properties (from
// viewStateInfo dictionary) to each node.
// 4. If multiple activities have same IdRef values then corresponding viewstate related attached properties
// (from viewStateInfo dictionary) are applied to the first of those activities. The other activities with duplicate
// IdRef values do not get view state information.
public static XamlReader ConvertViewStateToAttachedProperties(XamlReader inputReader, ViewStateIdManager idManager, out Dictionary <string, SourceLocation> viewStateSourceLocationMap)
{
int idRefLineNumber = 0;
int idRefLinePosition = 0;
bool shouldWriteIdRefEndMember = false;
XamlReader retVal = null;
// Xaml member definition for IdRef. Used to identify existing IdRef properties in the input nodestream.
XamlMember idRefMember = new XamlMember(IdRef, GetIdRef, SetIdRef, inputReader.SchemaContext);
// These are used to ignore the IdRef members that are inside a DynamicUpdateInfo.OriginalDefinition/OriginalActivityBuilder attached property.
// We need to ignore these because if we don't, the IdRef values for the objects in the actual workflow defintion will be ignored because of the
// duplicate IdRef value. This causes problems with activity designers that depend on the ViewStateManager data to correctly display the workflow
// on the WorkflowDesigner canvas.
XamlMember originalDefinitionMember = new XamlMember(DynamicUpdateOriginalDefinitionMemberName, GetOriginalDefinition, SetOriginalDefinition, inputReader.SchemaContext);
XamlMember originalActivityBuilderMember = new XamlMember(DynamicUpdateOriginalActivityBuilderMemberName, GetOriginalActivityBuilder, SetOriginalActivityBuilder, inputReader.SchemaContext);
// insideOriginalDefintion gets set to true when we find a "StartMember" node for either of the above two attached properties.
// originalDefintionMemberCount gets incremented if we find any "StartMember" and insideOriginalDefinition is true.
// originalDefintionMemberCount gets decremented if we find any "EndMember" and insideOriginalDefintion is true.
// insideOriginalDefintion gets set to false when we find an "EndMember" and originalDefinitionMemberCount gets decremented to 0.
// If insideOriginalDefintion is true when we find an "IdRef" member, we do NOT add that IdRef to the idRefsSeen HashSet to avoid
// duplicates being defined by the IdRefs inside of the OriginalDefinition attached properties.
bool insideOriginalDefinition = false;
int originalDefinitionMemberCount = 0;
// Dictionary containing Ids and corresponding viewstate related
// attached property nodes. Populated by StripViewStateElement method.
Dictionary <string, XamlNodeList> viewStateInfo = null;
XamlReader workflowDefinition = StripViewStateElement(inputReader, out viewStateInfo, out viewStateSourceLocationMap);
// This is used to keep track of duplicate IdRefs in the workflow definition.
HashSet <string> idRefsSeen = new HashSet <string>();
// If the inputReader did not have a ViewStateManager node (4.0 format)
// return early.
if (viewStateInfo == null)
{
retVal = workflowDefinition;
}
else
{
// Stack to track StartObject/GetObject and EndObject nodes.
Stack <Frame> stack = new Stack <Frame>();
// Output node list.
XamlNodeList mergedNodeList = new XamlNodeList(workflowDefinition.SchemaContext);
bool inIdRefMember = false;
using (XamlWriter mergedNodeWriter = mergedNodeList.Writer)
{
IXamlLineInfo lineInfo = workflowDefinition as IXamlLineInfo;
IXamlLineInfoConsumer lineInfoComsumer = mergedNodeWriter as IXamlLineInfoConsumer;
bool shouldPassLineInfo = lineInfo != null && lineInfo.HasLineInfo && lineInfoComsumer != null && lineInfoComsumer.ShouldProvideLineInfo;
while (workflowDefinition.Read())
{
bool skipWritingWorkflowDefinition = false;
switch (workflowDefinition.NodeType)
{
case XamlNodeType.StartObject:
stack.Push(new Frame {
Type = workflowDefinition.Type
});
break;
case XamlNodeType.GetObject:
stack.Push(new Frame {
Type = null
});
break;
case XamlNodeType.StartMember:
// If we find a StartMember for DynamicUpdateInfo.OriginalDefinition or OriginalActivityBuilder, remember that we are
// inside one of those. We don't want to "remember" IdRef values in the idRefsSeen HashSet while inside these attached properties.
if (workflowDefinition.Member.Equals(originalDefinitionMember) || workflowDefinition.Member.Equals(originalActivityBuilderMember))
{
insideOriginalDefinition = true;
}
if (insideOriginalDefinition)
{
originalDefinitionMemberCount++;
}
// Track when the reader enters IdRef. Skip writing the start
// node to the output nodelist until we check for duplicates.
else if (workflowDefinition.Member.Equals(idRefMember))
{
inIdRefMember = true;
skipWritingWorkflowDefinition = true;
if (shouldPassLineInfo)
{
idRefLineNumber = lineInfo.LineNumber;
idRefLinePosition = lineInfo.LinePosition;
}
}
break;
case XamlNodeType.Value:
if (inIdRefMember)
{
// We don't want to deal with the IdRef if we are inside a DynamicUpdateInfo.OriginalDefinition/OriginalActivityBuilder
// attached property.
if (!insideOriginalDefinition)
{
string idRef = workflowDefinition.Value as string;
if (!string.IsNullOrWhiteSpace(idRef))
{
// If IdRef value is a duplicate then do not associate it with
// the stack frame (top of stack == activity node with IdRef member on it).
if (idRefsSeen.Contains(idRef))
{
stack.Peek().IdRef = null;
}
// If the IdRef value is unique then associate it with the
// stack frame and also write its value into the output nodestream.
else
{
stack.Peek().IdRef = idRef;
idManager.UpdateMap(idRef);
idRefsSeen.Add(idRef);
if (shouldPassLineInfo)
{
lineInfoComsumer.SetLineInfo(idRefLineNumber, idRefLinePosition);
}
mergedNodeWriter.WriteStartMember(idRefMember);
if (shouldPassLineInfo)
{
lineInfoComsumer.SetLineInfo(lineInfo.LineNumber, lineInfo.LinePosition);
}
mergedNodeWriter.WriteValue(idRef);
shouldWriteIdRefEndMember = true;
}
}
}
// Don't need to write IdRef value into the output
// nodestream. If the value was valid, it would have been written above.
skipWritingWorkflowDefinition = true;
}
break;
case XamlNodeType.EndMember:
// If we are inside an OriginalDefinition/OriginalActivityBuilder attached property,
// decrement the count and if it goes to zero, set insideOriginalDefintion to false
// because we just encountered the EndMember for it.
if (insideOriginalDefinition)
{
originalDefinitionMemberCount--;
if (originalDefinitionMemberCount == 0)
{
insideOriginalDefinition = false;
}
}
// Exit IdRef node. Skip writing the EndMember node, we would have done
// it as part of reading the IdRef value.
if (inIdRefMember && !insideOriginalDefinition)
{
inIdRefMember = false;
skipWritingWorkflowDefinition = true;
if (shouldWriteIdRefEndMember)
{
shouldWriteIdRefEndMember = false;
if (shouldPassLineInfo)
{
lineInfoComsumer.SetLineInfo(lineInfo.LineNumber, lineInfo.LinePosition);
}
mergedNodeWriter.WriteEndMember();
}
}
break;
case XamlNodeType.EndObject:
Frame frameObject = stack.Pop();
// Before we exit the end of an object, check if it had IdRef
// associated with it. If it did, look-up viewStateInfo for viewstate
// related attached property nodes and add them to the output nodelist.
if (!string.IsNullOrWhiteSpace(frameObject.IdRef))
{
XamlNodeList viewStateNodeList;
if (viewStateInfo.TryGetValue(frameObject.IdRef, out viewStateNodeList))
{
XamlReader viewStateReader = viewStateNodeList.GetReader();
IXamlLineInfo viewStateLineInfo = viewStateReader as IXamlLineInfo;
bool viewStateShouldPassLineInfo = viewStateLineInfo != null && viewStateLineInfo.HasLineInfo && lineInfoComsumer != null && lineInfoComsumer.ShouldProvideLineInfo;
while (viewStateReader.Read())
{
if (viewStateShouldPassLineInfo)
{
lineInfoComsumer.SetLineInfo(viewStateLineInfo.LineNumber, viewStateLineInfo.LinePosition);
}
mergedNodeWriter.WriteNode(viewStateReader);
}
}
}
break;
}
if (!skipWritingWorkflowDefinition)
{
if (shouldPassLineInfo)
{
lineInfoComsumer.SetLineInfo(lineInfo.LineNumber, lineInfo.LinePosition);
}
mergedNodeWriter.WriteNode(workflowDefinition);
}
}
}
retVal = mergedNodeList.GetReader();
}
return(retVal);
}
// This method converts view state information stored within the ViewStateManager node back as
// attached properties on corresponding activity nodes.
// It is called when workflow definition is being deserialized from a string.
// inputReader - Nodestream that may have all view state information in the ViewStateManager node at the end of workflow definition.
// The reader is positioned at the begining of the workflow definition.
// idManager - This component issues running sequence numbers for IdRef.
// viewStateManager - (output) ViewStateManager object instance deserialized from the workflow definition.
// Result - Node stream positioned at the begining of the workflow definition with view state related information
// appearing as attached properties on activities. The ViewStateManager nodes are removed from the stream.
// Implementation logic:
// 1. Scan the input nodestream for ViewStateManager node.
// 2. If ViewStateManager node is found, store Id and corresponding attached property nodes
// in viewStateInfo dictionary. Otherwise return early.
// 3. Walk activity nodes in the workflow definition and apply viewstate related attached properties (from
// viewStateInfo dictionary) to each node.
// 4. If multiple activities have same IdRef values then corresponding viewstate related attached properties
// (from viewStateInfo dictionary) are applied to the first of those activities. The other activities with duplicate
// IdRef values do not get view state information.
public static XamlReader ConvertViewStateToAttachedProperties(XamlReader inputReader, ViewStateIdManager idManager, out Dictionary <string, SourceLocation> viewStateSourceLocationMap)
{
int idRefLineNumber = 0;
int idRefLinePosition = 0;
bool shouldWriteIdRefEndMember = false;
XamlReader retVal = null;
// Xaml member definition for IdRef. Used to identify existing IdRef properties in the input nodestream.
XamlMember idRefMember = new XamlMember(IdRef, GetIdRef, SetIdRef, inputReader.SchemaContext);
// Dictionary containing Ids and corresponding viewstate related
// attached property nodes. Populated by StripViewStateElement method.
Dictionary <string, XamlNodeList> viewStateInfo = null;
XamlReader workflowDefinition = StripViewStateElement(inputReader, out viewStateInfo, out viewStateSourceLocationMap);
// This is used to keep track of duplicate IdRefs in the workflow definition.
HashSet <string> idRefsSeen = new HashSet <string>();
// If the inputReader did not have a ViewStateManager node (4.0 format)
// return early.
if (viewStateInfo == null)
{
retVal = workflowDefinition;
}
else
{
// Stack to track StartObject/GetObject and EndObject nodes.
Stack <Frame> stack = new Stack <Frame>();
// Output node list.
XamlNodeList mergedNodeList = new XamlNodeList(workflowDefinition.SchemaContext);
bool inIdRefMember = false;
using (XamlWriter mergedNodeWriter = mergedNodeList.Writer)
{
IXamlLineInfo lineInfo = workflowDefinition as IXamlLineInfo;
IXamlLineInfoConsumer lineInfoComsumer = mergedNodeWriter as IXamlLineInfoConsumer;
bool shouldPassLineInfo = lineInfo != null && lineInfo.HasLineInfo && lineInfoComsumer != null && lineInfoComsumer.ShouldProvideLineInfo;
while (workflowDefinition.Read())
{
bool skipWritingWorkflowDefinition = false;
switch (workflowDefinition.NodeType)
{
case XamlNodeType.StartObject:
stack.Push(new Frame {
Type = workflowDefinition.Type
});
break;
case XamlNodeType.GetObject:
stack.Push(new Frame {
Type = null
});
break;
case XamlNodeType.StartMember:
// Track when the reader enters IdRef. Skip writing the start
// node to the output nodelist until we check for duplicates.
if (workflowDefinition.Member.Equals(idRefMember))
{
inIdRefMember = true;
skipWritingWorkflowDefinition = true;
if (shouldPassLineInfo)
{
idRefLineNumber = lineInfo.LineNumber;
idRefLinePosition = lineInfo.LinePosition;
}
}
break;
case XamlNodeType.Value:
if (inIdRefMember)
{
string idRef = workflowDefinition.Value as string;
if (!string.IsNullOrWhiteSpace(idRef))
{
// If IdRef value is a duplicate then do not associate it with
// the stack frame (top of stack == activity node with IdRef member on it).
if (idRefsSeen.Contains(idRef))
{
stack.Peek().IdRef = null;
}
// If the IdRef value is unique then associate it with the
// stack frame and also write its value into the output nodestream.
else
{
stack.Peek().IdRef = idRef;
idManager.UpdateMap(idRef);
idRefsSeen.Add(idRef);
if (shouldPassLineInfo)
{
lineInfoComsumer.SetLineInfo(idRefLineNumber, idRefLinePosition);
}
mergedNodeWriter.WriteStartMember(idRefMember);
if (shouldPassLineInfo)
{
lineInfoComsumer.SetLineInfo(lineInfo.LineNumber, lineInfo.LinePosition);
}
mergedNodeWriter.WriteValue(idRef);
shouldWriteIdRefEndMember = true;
}
}
// Don't need to write IdRef value into the output
// nodestream. If the value was valid, it would have been written above.
skipWritingWorkflowDefinition = true;
}
break;
case XamlNodeType.EndMember:
// Exit IdRef node. Skip writing the EndMember node, we would have done
// it as part of reading the IdRef value.
if (inIdRefMember)
{
inIdRefMember = false;
skipWritingWorkflowDefinition = true;
if (shouldWriteIdRefEndMember)
{
shouldWriteIdRefEndMember = false;
if (shouldPassLineInfo)
{
lineInfoComsumer.SetLineInfo(lineInfo.LineNumber, lineInfo.LinePosition);
}
mergedNodeWriter.WriteEndMember();
}
}
break;
case XamlNodeType.EndObject:
Frame frameObject = stack.Pop();
// Before we exit the end of an object, check if it had IdRef
// associated with it. If it did, look-up viewStateInfo for viewstate
// related attached property nodes and add them to the output nodelist.
if (!string.IsNullOrWhiteSpace(frameObject.IdRef))
{
XamlNodeList viewStateNodeList;
if (viewStateInfo.TryGetValue(frameObject.IdRef, out viewStateNodeList))
{
XamlReader viewStateReader = viewStateNodeList.GetReader();
IXamlLineInfo viewStateLineInfo = viewStateReader as IXamlLineInfo;
bool viewStateShouldPassLineInfo = viewStateLineInfo != null && viewStateLineInfo.HasLineInfo && lineInfoComsumer != null && lineInfoComsumer.ShouldProvideLineInfo;
while (viewStateReader.Read())
{
if (viewStateShouldPassLineInfo)
{
lineInfoComsumer.SetLineInfo(viewStateLineInfo.LineNumber, viewStateLineInfo.LinePosition);
}
mergedNodeWriter.WriteNode(viewStateReader);
}
}
}
break;
}
if (!skipWritingWorkflowDefinition)
{
if (shouldPassLineInfo)
{
lineInfoComsumer.SetLineInfo(lineInfo.LineNumber, lineInfo.LinePosition);
}
mergedNodeWriter.WriteNode(workflowDefinition);
}
}
}
retVal = mergedNodeList.GetReader();
}
return(retVal);
}
// This method converts view state information stored within the ViewStateManager node back as
// attached properties on corresponding activity nodes.
// It is called when workflow definition is being deserialized from a string.
// inputReader - Nodestream that may have all view state information in the ViewStateManager node at the end of workflow definition.
// The reader is positioned at the begining of the workflow definition.
// idManager - This component issues running sequence numbers for IdRef.
// viewStateManager - (output) ViewStateManager object instance deserialized from the workflow definition.
// Result - Node stream positioned at the begining of the workflow definition with view state related information
// appearing as attached properties on activities. The ViewStateManager nodes are removed from the stream.
// Implementation logic:
// 1. Scan the input nodestream for ViewStateManager node.
// 2. If ViewStateManager node is found, store Id and corresponding attached property nodes
// in viewStateInfo dictionary. Otherwise return early.
// 3. Walk activity nodes in the workflow definition and apply viewstate related attached properties (from
// viewStateInfo dictionary) to each node.
// 4. If multiple activities have same IdRef values then corresponding viewstate related attached properties
// (from viewStateInfo dictionary) are applied to the first of those activities. The other activities with duplicate
// IdRef values do not get view state information.
public static XamlReader ConvertViewStateToAttachedProperties(XamlReader inputReader, ViewStateIdManager idManager, out Dictionary<string, SourceLocation> viewStateSourceLocationMap)
{
int idRefLineNumber = 0;
int idRefLinePosition = 0;
bool shouldWriteIdRefEndMember = false;
XamlReader retVal = null;
// Xaml member definition for IdRef. Used to identify existing IdRef properties in the input nodestream.
XamlMember idRefMember = new XamlMember(IdRef, GetIdRef, SetIdRef, inputReader.SchemaContext);
// These are used to ignore the IdRef members that are inside a DynamicUpdateInfo.OriginalDefinition/OriginalActivityBuilder attached property.
// We need to ignore these because if we don't, the IdRef values for the objects in the actual workflow defintion will be ignored because of the
// duplicate IdRef value. This causes problems with activity designers that depend on the ViewStateManager data to correctly display the workflow
// on the WorkflowDesigner canvas.
XamlMember originalDefinitionMember = new XamlMember(DynamicUpdateOriginalDefinitionMemberName, GetOriginalDefinition, SetOriginalDefinition, inputReader.SchemaContext);
XamlMember originalActivityBuilderMember = new XamlMember(DynamicUpdateOriginalActivityBuilderMemberName, GetOriginalActivityBuilder, SetOriginalActivityBuilder, inputReader.SchemaContext);
// insideOriginalDefintion gets set to true when we find a "StartMember" node for either of the above two attached properties.
// originalDefintionMemberCount gets incremented if we find any "StartMember" and insideOriginalDefinition is true.
// originalDefintionMemberCount gets decremented if we find any "EndMember" and insideOriginalDefintion is true.
// insideOriginalDefintion gets set to false when we find an "EndMember" and originalDefinitionMemberCount gets decremented to 0.
// If insideOriginalDefintion is true when we find an "IdRef" member, we do NOT add that IdRef to the idRefsSeen HashSet to avoid
// duplicates being defined by the IdRefs inside of the OriginalDefinition attached properties.
bool insideOriginalDefinition = false;
int originalDefinitionMemberCount = 0;
// Dictionary containing Ids and corresponding viewstate related
// attached property nodes. Populated by StripViewStateElement method.
Dictionary<string, XamlNodeList> viewStateInfo = null;
XamlReader workflowDefinition = StripViewStateElement(inputReader, out viewStateInfo, out viewStateSourceLocationMap);
// This is used to keep track of duplicate IdRefs in the workflow definition.
HashSet<string> idRefsSeen = new HashSet<string>();
// If the inputReader did not have a ViewStateManager node (4.0 format)
// return early.
if (viewStateInfo == null)
{
retVal = workflowDefinition;
}
else
{
// Stack to track StartObject/GetObject and EndObject nodes.
Stack<Frame> stack = new Stack<Frame>();
// Output node list.
XamlNodeList mergedNodeList = new XamlNodeList(workflowDefinition.SchemaContext);
bool inIdRefMember = false;
using (XamlWriter mergedNodeWriter = mergedNodeList.Writer)
{
IXamlLineInfo lineInfo = workflowDefinition as IXamlLineInfo;
IXamlLineInfoConsumer lineInfoComsumer = mergedNodeWriter as IXamlLineInfoConsumer;
bool shouldPassLineInfo = lineInfo != null && lineInfo.HasLineInfo && lineInfoComsumer != null && lineInfoComsumer.ShouldProvideLineInfo;
while (workflowDefinition.Read())
{
bool skipWritingWorkflowDefinition = false;
switch (workflowDefinition.NodeType)
{
case XamlNodeType.StartObject:
stack.Push(new Frame { Type = workflowDefinition.Type });
break;
case XamlNodeType.GetObject:
stack.Push(new Frame { Type = null });
break;
case XamlNodeType.StartMember:
// If we find a StartMember for DynamicUpdateInfo.OriginalDefinition or OriginalActivityBuilder, remember that we are
// inside one of those. We don't want to "remember" IdRef values in the idRefsSeen HashSet while inside these attached properties.
if (workflowDefinition.Member.Equals(originalDefinitionMember) || workflowDefinition.Member.Equals(originalActivityBuilderMember))
{
insideOriginalDefinition = true;
}
if (insideOriginalDefinition)
{
originalDefinitionMemberCount++;
}
// Track when the reader enters IdRef. Skip writing the start
// node to the output nodelist until we check for duplicates.
else if (workflowDefinition.Member.Equals(idRefMember))
{
inIdRefMember = true;
skipWritingWorkflowDefinition = true;
if (shouldPassLineInfo)
{
idRefLineNumber = lineInfo.LineNumber;
idRefLinePosition = lineInfo.LinePosition;
}
}
break;
case XamlNodeType.Value:
if (inIdRefMember)
{
// We don't want to deal with the IdRef if we are inside a DynamicUpdateInfo.OriginalDefinition/OriginalActivityBuilder
// attached property.
if (!insideOriginalDefinition)
{
string idRef = workflowDefinition.Value as string;
if (!string.IsNullOrWhiteSpace(idRef))
{
// If IdRef value is a duplicate then do not associate it with
// the stack frame (top of stack == activity node with IdRef member on it).
if (idRefsSeen.Contains(idRef))
{
stack.Peek().IdRef = null;
}
// If the IdRef value is unique then associate it with the
// stack frame and also write its value into the output nodestream.
else
{
stack.Peek().IdRef = idRef;
idManager.UpdateMap(idRef);
idRefsSeen.Add(idRef);
if (shouldPassLineInfo)
{
lineInfoComsumer.SetLineInfo(idRefLineNumber, idRefLinePosition);
}
mergedNodeWriter.WriteStartMember(idRefMember);
if (shouldPassLineInfo)
{
lineInfoComsumer.SetLineInfo(lineInfo.LineNumber, lineInfo.LinePosition);
}
mergedNodeWriter.WriteValue(idRef);
shouldWriteIdRefEndMember = true;
}
}
}
// Don't need to write IdRef value into the output
// nodestream. If the value was valid, it would have been written above.
skipWritingWorkflowDefinition = true;
}
break;
case XamlNodeType.EndMember:
// If we are inside an OriginalDefinition/OriginalActivityBuilder attached property,
// decrement the count and if it goes to zero, set insideOriginalDefintion to false
// because we just encountered the EndMember for it.
if (insideOriginalDefinition)
{
originalDefinitionMemberCount--;
if (originalDefinitionMemberCount == 0)
{
insideOriginalDefinition = false;
}
}
// Exit IdRef node. Skip writing the EndMember node, we would have done
// it as part of reading the IdRef value.
if (inIdRefMember && !insideOriginalDefinition)
{
inIdRefMember = false;
skipWritingWorkflowDefinition = true;
if (shouldWriteIdRefEndMember)
{
shouldWriteIdRefEndMember = false;
if (shouldPassLineInfo)
{
lineInfoComsumer.SetLineInfo(lineInfo.LineNumber, lineInfo.LinePosition);
}
mergedNodeWriter.WriteEndMember();
}
}
break;
case XamlNodeType.EndObject:
Frame frameObject = stack.Pop();
// Before we exit the end of an object, check if it had IdRef
// associated with it. If it did, look-up viewStateInfo for viewstate
// related attached property nodes and add them to the output nodelist.
if (!string.IsNullOrWhiteSpace(frameObject.IdRef))
{
XamlNodeList viewStateNodeList;
if (viewStateInfo.TryGetValue(frameObject.IdRef, out viewStateNodeList))
{
XamlReader viewStateReader = viewStateNodeList.GetReader();
IXamlLineInfo viewStateLineInfo = viewStateReader as IXamlLineInfo;
bool viewStateShouldPassLineInfo = viewStateLineInfo != null && viewStateLineInfo.HasLineInfo && lineInfoComsumer != null && lineInfoComsumer.ShouldProvideLineInfo;
while (viewStateReader.Read())
{
if (viewStateShouldPassLineInfo)
{
lineInfoComsumer.SetLineInfo(viewStateLineInfo.LineNumber, viewStateLineInfo.LinePosition);
}
mergedNodeWriter.WriteNode(viewStateReader);
}
}
}
break;
}
if (!skipWritingWorkflowDefinition)
{
if (shouldPassLineInfo)
{
lineInfoComsumer.SetLineInfo(lineInfo.LineNumber, lineInfo.LinePosition);
}
mergedNodeWriter.WriteNode(workflowDefinition);
}
}
}
retVal = mergedNodeList.GetReader();
}
return retVal;
}
