public SPTEditWindow()
{
InitializeComponent();
sptReader = null;
lastElement = null;
sptFile = null;
sptDirectory = null;
sptDirCurrentIdx = 0;
_edited = false;
}
private void UpdateMemory()
{
for (int cind = panel1.Controls.Count - 1; cind >= 0; cind--)
{
Translatable t = panel1.Controls[cind] as Translatable;
if (t == null)
{
continue;
}
List <KeyValuePair <string, string> > entries = t.GetMemoryEntries();
if (entries == null)
{
continue;
}
foreach (KeyValuePair <string, string> e in entries)
{
TranslationMemory.AddEntry(e.Key, e.Value);
}
}
UpdateFromMemory();
}
private void btnSave_Click(object sender, EventArgs e)
{
if (sptFile == null)
{
return;
}
FileStream f = sptFile;
BinaryWriter w = new BinaryWriter(f, Font10Converter.SHIFT_JIS);
//List<SPTCommand> tempCommands = new List<SPTCommand>(fileCommands);
UpdateMemory();
for (int cind = panel1.Controls.Count - 1; cind >= 0; cind--)
{
Translatable t = panel1.Controls[cind] as Translatable;
if (t == null || t.commands.Count == 0)
{
continue;
}
SPTCommand first = t.commands[0];
List <SPTCommand> eng = t.GetEnglishCommands();
if (eng.Count != 0)
{
int idx = first.GetIndexInBlock();
first.Block.Elements.RemoveRange(idx, t.commands.Count);
first.Block.Elements.InsertRange(idx, eng);
t.commands = eng;
}
}
UpdateLineNumbers(root);
w.BaseStream.SetLength(0);
w.BaseStream.Flush();
writeSPTFile(w, root);
w.Flush();
Edited = false;
status("Save completed.");
}
private void loadSPT()
{
if (sptReader == null)
return;
panel1.Controls.Clear();
lastElement = null;
Edited = false;
// data structure set up
int id = 0;
root = new SPTBlock(0);
blockHierarchy = new Stack<SPTBlock>();
blockHierarchy.Push(root);
SPTCommand c;
// case-specific flags
bool needNewBlock = true;
bool checkNameWinClose = false;
while ((c = SPTCommand.FromStream(sptReader, id++, blockHierarchy.Peek())) != null)
{
// pre loop logic
if (c.GetArg(0)[0] == '{')
{
SPTBlock b = new SPTBlock(id);
b.Elements.Add(c);
blockHierarchy.Peek().Elements.Add(b);
blockHierarchy.Push(b);
continue;
}
else if (c.GetArg(0)[0] == '}')
{
blockHierarchy.Pop().Elements.Add(c);
continue;
}
blockHierarchy.Peek().Elements.Add(c);
if (!(c.GetArg(0).Equals("message") || c.GetArg(0).Equals("message0")))
{
needNewBlock = true;
}
////
if (c.GetArg(0).Equals("message") || c.GetArg(0).Equals("message0")) // start of message set
{
if (needNewBlock)
{
if (c.GetArg(1) != "mbox0")
addTranslatable(new Note("Found non-mbox0 message box, tell me about this", id));
addTranslatable(new MessageBlock());
needNewBlock = false;
}
for (int i = 2; i < c.ArgCount; ++i)
{
string msg = c.GetArg(i);
if (i + 1 < c.ArgCount)
{
msg += "§";
}
lastElement.JapText += msg;
}
lastElement.JapText += "¶\r\n";
lastElement.commands.Add(c);
}
else if (c.GetArg(0).Equals("nameset0")) // setting talker name
{
if (c.GetArg(1).Equals("N0"))
{
addTranslatable(new Nameplate());
lastElement.JapText = c.GetArg(2);
lastElement.commands.Add(c);
}
}
else if (c.GetArg(0).Equals("nameset")) // check for azuma talking
{
if (c.GetArg(1).Equals("N0") && c.GetArg(2).StartsWith("00_"))
{
if (lastElement != null && lastElement.JapText.Equals("NO NAME:")) //it removes nameplate for azuma, have to ignore for this
panel1.Controls.Remove(lastElement);
lastElement = ((panel1.Controls.Count - 1 >= 0) ? (Translatable)panel1.Controls[panel1.Controls.Count - 1] : null);
addTranslatable(new Note("AZUMA:"));
}
}
else if (c.GetArg(0).Equals("actortext0") && c.GetArg(1).Equals("name_win")) // check if name window being hidden
{
checkNameWinClose = true;
continue;
}
else if (c.GetArg(0).Equals("actordisp0") && c.GetArg(1).Equals("name_win") && c.GetArg(2).Equals("false") && checkNameWinClose)
{
addTranslatable(new Note("NO NAME:"));
}
else if (c.GetArg(0).Equals("scriptcall0") && c.GetArg(1).Equals("select"))
{
int nopts = Convert.ToInt32(c.GetArg(2));
addTranslatable(new Note("SELECTION ("+ nopts +"):"));
GenericTranslatable t = new GenericTranslatable(c);
for (int i = 0; i < nopts + 1; ++i)
t.AddArg(new GenericTArgOpts(3 + i, (i > 0)));
addTranslatable(t);
}
else if (c.GetArg(0).Equals("scriptcall"))
{
addTranslatable(new Note("Note: This script calls \"" + c.GetArg(1) + ".spt\"."));
}
else if (c.GetArg(0).StartsWith("ifselect") || (c.ArgCount > 1 && c.GetArg(1).StartsWith("ifselect")))
{
addTranslatable(new Note("IF-SELECT:"));
GenericTranslatable t = new GenericTranslatable(c);
t.AddArg(new GenericTArgOpts(c.GetArg(0).StartsWith("ifselect") ? 1 : 2, true));
addTranslatable(t);
}
else
{
// some non-known command. try finding japanese text.
// arg 0 is always english command - it won't have japanese text.
bool done = false;
if (c.ArgCount > 1)
{
for (int i = 1; i < c.ArgCount && !done; ++i)
{
string arg = c.GetArg(i);
// check if one of the first 3 characters is japanese
for (int j = 0; j < Math.Min(3, arg.Length); ++j)
{
if (Font10Converter.IsJapanese(arg[j]))
{
addTranslatable(new Note("Unidentified Japanese text detected, tell me about this. Full command shown.", id));
GenericTranslatable t = new GenericTranslatable(c);
for (int k = 0; k < c.ArgCount; ++k)
t.AddArg((GenericTArgOpts)k);
addTranslatable(t);
done = true;
break;
}
}
}
}
}
////
checkNameWinClose = false;
// post loop logic
}
panel1.Focus(); // so the scroll bar works more intuitively
UpdateFromMemory();
status("Loaded \"" + txtSPTPath.Text.Substring(txtSPTPath.Text.LastIndexOf('\\')+1) + "\"");
}
private void addTranslatable(Translatable t)
{
int y = ((lastElement != null) ? (lastElement.Location.Y + lastElement.Size.Height) : 0);
t.Location = new Point(2, y + 2);
panel1.Controls.Add(t);
lastElement = t;
t.EditEvent += new Translatable.OnEdit(t_EditEvent);
}
private void loadSPT()
{
if (sptReader == null)
{
return;
}
panel1.Controls.Clear();
lastElement = null;
Edited = false;
// data structure set up
int id = 0;
root = new SPTBlock(0);
blockHierarchy = new Stack <SPTBlock>();
blockHierarchy.Push(root);
SPTCommand c;
// case-specific flags
bool needNewBlock = true;
bool checkNameWinClose = false;
while ((c = SPTCommand.FromStream(sptReader, id++, blockHierarchy.Peek())) != null)
{
// pre loop logic
if (c.GetArg(0)[0] == '{')
{
SPTBlock b = new SPTBlock(id);
b.Elements.Add(c);
blockHierarchy.Peek().Elements.Add(b);
blockHierarchy.Push(b);
continue;
}
else if (c.GetArg(0)[0] == '}')
{
blockHierarchy.Pop().Elements.Add(c);
continue;
}
blockHierarchy.Peek().Elements.Add(c);
if (!(c.GetArg(0).Equals("message") || c.GetArg(0).Equals("message0")))
{
needNewBlock = true;
}
////
if (c.GetArg(0).Equals("message") || c.GetArg(0).Equals("message0")) // start of message set
{
if (needNewBlock)
{
if (c.GetArg(1) != "mbox0")
{
addTranslatable(new Note("Found non-mbox0 message box, tell me about this", id));
}
addTranslatable(new MessageBlock());
needNewBlock = false;
}
for (int i = 2; i < c.ArgCount; ++i)
{
string msg = c.GetArg(i);
if (i + 1 < c.ArgCount)
{
msg += "§";
}
lastElement.JapText += msg;
}
lastElement.JapText += "¶\r\n";
lastElement.commands.Add(c);
}
else if (c.GetArg(0).Equals("nameset0")) // setting talker name
{
if (c.GetArg(1).Equals("N0"))
{
addTranslatable(new Nameplate());
lastElement.JapText = c.GetArg(2);
lastElement.commands.Add(c);
}
}
else if (c.GetArg(0).Equals("nameset")) // check for azuma talking
{
if (c.GetArg(1).Equals("N0") && c.GetArg(2).StartsWith("00_"))
{
if (lastElement != null && lastElement.JapText.Equals("NO NAME:")) //it removes nameplate for azuma, have to ignore for this
{
panel1.Controls.Remove(lastElement);
}
lastElement = ((panel1.Controls.Count - 1 >= 0) ? (Translatable)panel1.Controls[panel1.Controls.Count - 1] : null);
addTranslatable(new Note("AZUMA:"));
}
}
else if (c.GetArg(0).Equals("actortext0") && c.GetArg(1).Equals("name_win")) // check if name window being hidden
{
checkNameWinClose = true;
continue;
}
else if (c.GetArg(0).Equals("actordisp0") && c.GetArg(1).Equals("name_win") && c.GetArg(2).Equals("false") && checkNameWinClose)
{
addTranslatable(new Note("NO NAME:"));
}
else if (c.GetArg(0).Equals("scriptcall0") && c.GetArg(1).Equals("select"))
{
int nopts = Convert.ToInt32(c.GetArg(2));
addTranslatable(new Note("SELECTION (" + nopts + "):"));
GenericTranslatable t = new GenericTranslatable(c);
for (int i = 0; i < nopts + 1; ++i)
{
t.AddArg(new GenericTArgOpts(3 + i, (i > 0)));
}
addTranslatable(t);
}
else if (c.GetArg(0).Equals("scriptcall"))
{
addTranslatable(new Note("Note: This script calls \"" + c.GetArg(1) + ".spt\"."));
}
else if (c.GetArg(0).StartsWith("ifselect") || (c.ArgCount > 1 && c.GetArg(1).StartsWith("ifselect")))
{
addTranslatable(new Note("IF-SELECT:"));
GenericTranslatable t = new GenericTranslatable(c);
t.AddArg(new GenericTArgOpts(c.GetArg(0).StartsWith("ifselect") ? 1 : 2, true));
addTranslatable(t);
}
else
{
// some non-known command. try finding japanese text.
// arg 0 is always english command - it won't have japanese text.
bool done = false;
if (c.ArgCount > 1)
{
for (int i = 1; i < c.ArgCount && !done; ++i)
{
string arg = c.GetArg(i);
// check if one of the first 3 characters is japanese
for (int j = 0; j < Math.Min(3, arg.Length); ++j)
{
if (Font10Converter.IsJapanese(arg[j]))
{
addTranslatable(new Note("Unidentified Japanese text detected, tell me about this. Full command shown.", id));
GenericTranslatable t = new GenericTranslatable(c);
for (int k = 0; k < c.ArgCount; ++k)
{
t.AddArg((GenericTArgOpts)k);
}
addTranslatable(t);
done = true;
break;
}
}
}
}
}
////
checkNameWinClose = false;
// post loop logic
}
panel1.Focus(); // so the scroll bar works more intuitively
UpdateFromMemory();
status("Loaded \"" + txtSPTPath.Text.Substring(txtSPTPath.Text.LastIndexOf('\\') + 1) + "\"");
}
