public static bool SetupRequired(PrinterConfig printer)
{
return(LevelingValidation.NeedsToBeRun(printer) || // PrintLevelingWizard
ProbeCalibrationWizard.NeedsToBeRun(printer) ||
FilamentSetupWizard.SetupRequired(printer));
}
/// <summary>
/// Validates the printer settings satisfy all requirements
/// </summary>
/// <param name="printer">The printer to validate</param>
/// <returns>A list of all warnings and errors</returns>
public static List <ValidationError> ValidateSettings(this PrinterConfig printer, SettingsContext settings = null)
{
if (settings == null)
{
settings = new SettingsContext(printer, null, NamedSettingsLayers.All);
}
var errors = new List <ValidationError>();
var extruderCount = settings.GetValue <int>(SettingsKey.extruder_count);
// Check to see if supports are required
var supportGenerator = new SupportGenerator(printer.Bed.Scene, .05);
if (supportGenerator.RequiresSupport())
{
errors.Add(new ValidationError("UnsupportedParts")
{
Error = "Possible Unsupported Parts Detected".Localize(),
Details = "Some parts may require support structures to print correctly".Localize(),
ErrorLevel = ValidationErrorLevel.Warning,
FixAction = new NamedAction()
{
Title = "Generate Supports".Localize(),
Action = () =>
{
// Find and InvokeClick on the Generate Supports toolbar button
var sharedParent = ApplicationController.Instance.DragDropData.View3DWidget.Parents <GuiWidget>().FirstOrDefault(w => w.Name == "View3DContainerParent");
if (sharedParent != null)
{
var supportsPopup = sharedParent.FindDescendant("Support SplitButton");
supportsPopup.InvokeClick();
}
}
}
});
}
if (FilamentSetupWizard.SetupRequired(printer))
{
errors.Add(new ValidationError("FilamentSetup")
{
Error = "Unknown filament loaded".Localize(),
Details = "Set active material to continue".Localize(),
ErrorLevel = ValidationErrorLevel.Warning,
FixAction = new NamedAction()
{
Title = "Load Filament".Localize(),
Action = () =>
{
UiThread.RunOnIdle(() =>
{
DialogWindow.Show(
new FilamentSetupWizard(printer, AppContext.Theme),
advanceToIncompleteStage: true);
});
}
}
});
}
try
{
if (settings.GetValue <bool>(SettingsKey.validate_layer_height))
{
if (settings.GetValue <double>(SettingsKey.layer_height) > settings.GetValue <double>(SettingsKey.nozzle_diameter))
{
errors.Add(
new SettingsValidationError(SettingsKey.layer_height)
{
Error = "{0} must be less than or equal to the {1}.".Localize().FormatWith(
GetSettingsName(SettingsKey.layer_height),
GetSettingsName(SettingsKey.nozzle_diameter)),
ValueDetails = "{0} = {1}\n{2} = {3}".FormatWith(
GetSettingsName(SettingsKey.layer_height),
settings.GetValue <double>(SettingsKey.layer_height),
GetSettingsName(SettingsKey.nozzle_diameter),
settings.GetValue <double>(SettingsKey.nozzle_diameter)),
});
}
else if (settings.GetValue <double>(SettingsKey.layer_height) <= 0)
{
errors.Add(
new SettingsValidationError(SettingsKey.layer_height)
{
Error = "{0} must be greater than 0.".Localize().FormatWith(GetSettingsName(SettingsKey.layer_height)),
});
}
if (settings.GetValue <double>(SettingsKey.first_layer_height) > settings.GetValue <double>(SettingsKey.nozzle_diameter))
{
errors.Add(
new SettingsValidationError(SettingsKey.first_layer_height)
{
Error = "{0} must be less than or equal to the {1}.".Localize().FormatWith(
GetSettingsName(SettingsKey.first_layer_height),
GetSettingsName(SettingsKey.nozzle_diameter)),
ValueDetails = "{0} = {1}\n{2} = {3}".FormatWith(
GetSettingsName(SettingsKey.first_layer_height),
settings.GetValue <double>(SettingsKey.first_layer_height),
GetSettingsName(SettingsKey.nozzle_diameter),
settings.GetValue <double>(SettingsKey.nozzle_diameter)),
});
}
}
string[] startGCode = settings.GetValue(SettingsKey.start_gcode).Replace("\\n", "\n").Split('\n');
// Print recovery is incompatible with firmware leveling - ensure not enabled in startGCode
if (settings.GetValue <bool>(SettingsKey.recover_is_enabled))
{
// Ensure we don't have hardware leveling commands in the start gcode.
foreach (string startGCodeLine in startGCode)
{
if (startGCodeLine.StartsWith("G29"))
{
errors.Add(
new SettingsValidationError(SettingsKey.start_gcode)
{
Error = "Start G-Code cannot contain G29 if Print Recovery is enabled.".Localize(),
Details = "Your Start G-Code should not contain a G29 if you are planning on using Print Recovery. Change your start G-Code or turn off Print Recovery.".Localize(),
});
}
if (startGCodeLine.StartsWith("G30"))
{
errors.Add(
new SettingsValidationError(SettingsKey.start_gcode)
{
Error = "Start G-Code cannot contain G30 if Print Leveling is enabled.".Localize(),
Details = "Your Start G-Code should not contain a G30 if you are planning on using Print Recovery. Change your start G-Code or turn off Print Recovery.".Localize(),
});
}
}
}
var levelingEnabled = printer.Settings.GetValue <bool>(SettingsKey.print_leveling_enabled);
var levelingRequired = printer.Settings.GetValue <bool>(SettingsKey.print_leveling_required_to_print);
if (levelingEnabled || levelingRequired)
{
// Ensure we don't have hardware leveling commands in the start gcode.
foreach (string startGCodeLine in startGCode)
{
if (startGCodeLine.StartsWith("G29"))
{
errors.Add(
new SettingsValidationError(SettingsKey.start_gcode)
{
Error = "Start G-Code cannot contain G29 if Print Leveling is enabled.".Localize(),
Details = "Your Start G-Code should not contain a G29 if you are planning on using print leveling. Change your start G-Code or turn off print leveling.".Localize(),
});
}
if (startGCodeLine.StartsWith("G30"))
{
errors.Add(
new SettingsValidationError(SettingsKey.start_gcode)
{
Error = "Start G-Code cannot contain G30 if Print Leveling is enabled.".Localize(),
Details = "Your Start G-Code should not contain a G30 if you are planning on using print leveling. Change your start G-Code or turn off print leveling.".Localize(),
});
}
}
bool heatedBed = printer.Settings.GetValue <bool>(SettingsKey.has_heated_bed);
double bedTemperature = printer.Settings.GetValue <double>(SettingsKey.bed_temperature);
PrintLevelingData levelingData = printer.Settings.Helpers.PrintLevelingData;
if (heatedBed &&
!levelingData.IssuedLevelingTempWarning &&
Math.Abs(bedTemperature - levelingData.BedTemperature) > 10)
{
errors.Add(
new ValidationError("BedLevelingTemperature")
{
Error = "Bed Leveling Temperature".Localize(),
Details = string.Format(
"Bed Leveling data created at {0}°C versus current {1}°C".Localize(),
levelingData.BedTemperature,
bedTemperature),
ErrorLevel = ValidationErrorLevel.Warning,
FixAction = new NamedAction()
{
Title = "Recalibrate",
Action = () =>
{
UiThread.RunOnIdle(() =>
{
DialogWindow.Show(new PrintLevelingWizard(printer));
});
},
IsEnabled = () => printer.Connection.IsConnected
}
});
}
}
// Make sure the z offsets are not too big
if (Math.Abs(settings.GetValue <double>(SettingsKey.baby_step_z_offset)) > 2)
{
// Static path generation for non-SliceSettings value
var location = "Location".Localize() + ":"
+ "\n" + "Controls".Localize()
+ "\n • " + "Movement".Localize()
+ "\n • " + "Z Offset".Localize();
errors.Add(
new ValidationError("ZOffset0TooLarge")
{
Error = "Z Offset is too large.".Localize(),
Details = string.Format(
"{0}\n\n{1}",
"The Z Offset for your printer, sometimes called Baby Stepping, is greater than 2mm and invalid. Clear the value and re-level the bed.".Localize(),
location)
});
}
if (settings.GetValue <double>(SettingsKey.first_layer_extrusion_width) > settings.GetValue <double>(SettingsKey.nozzle_diameter) * 4)
{
errors.Add(
new SettingsValidationError(SettingsKey.first_layer_extrusion_width)
{
Error = "{0} must be less than or equal to the {1} * 4.".Localize().FormatWith(
GetSettingsName(SettingsKey.first_layer_extrusion_width),
GetSettingsName(SettingsKey.nozzle_diameter)),
ValueDetails = "{0} = {1}\n{2} = {3}".FormatWith(
GetSettingsName(SettingsKey.first_layer_extrusion_width),
settings.GetValue <double>(SettingsKey.first_layer_extrusion_width),
GetSettingsName(SettingsKey.nozzle_diameter),
settings.GetValue <double>(SettingsKey.nozzle_diameter))
});
}
if (settings.GetValue <double>(SettingsKey.first_layer_extrusion_width) <= 0)
{
errors.Add(
new SettingsValidationError(SettingsKey.first_layer_extrusion_width)
{
Error = "{0} must be greater than 0.".Localize().FormatWith(
GetSettingsName(SettingsKey.first_layer_extrusion_width)),
ValueDetails = "{0} = {1}".FormatWith(
GetSettingsName(SettingsKey.first_layer_extrusion_width),
settings.GetValue <double>(SettingsKey.first_layer_extrusion_width)),
});
}
if (settings.GetValue <double>(SettingsKey.external_perimeter_extrusion_width) > settings.GetValue <double>(SettingsKey.nozzle_diameter) * 4)
{
errors.Add(
new SettingsValidationError(SettingsKey.external_perimeter_extrusion_width)
{
Error = "{0} must be less than or equal to the {1} * 4.".Localize().FormatWith(
GetSettingsName(SettingsKey.external_perimeter_extrusion_width),
GetSettingsName(SettingsKey.nozzle_diameter)),
ValueDetails = "{0} = {1}\n{2} = {3}".FormatWith(
GetSettingsName(SettingsKey.external_perimeter_extrusion_width),
settings.GetValue <double>(SettingsKey.external_perimeter_extrusion_width),
GetSettingsName(SettingsKey.nozzle_diameter),
settings.GetValue <double>(SettingsKey.nozzle_diameter)),
});
}
if (settings.GetValue <double>(SettingsKey.external_perimeter_extrusion_width) <= 0)
{
errors.Add(
new SettingsValidationError(SettingsKey.external_perimeter_extrusion_width)
{
Error = "{0} must be greater than 0.".Localize().FormatWith(
GetSettingsName(SettingsKey.external_perimeter_extrusion_width)),
ValueDetails = "{0} = {1}".FormatWith(
GetSettingsName(SettingsKey.external_perimeter_extrusion_width),
settings.GetValue <double>(SettingsKey.external_perimeter_extrusion_width)),
});
}
if (settings.GetValue <double>(SettingsKey.min_fan_speed) > 100)
{
errors.Add(
new SettingsValidationError(SettingsKey.min_fan_speed)
{
Error = "The {0} can only go as high as 100%.".Localize().FormatWith(
GetSettingsName(SettingsKey.min_fan_speed)),
ValueDetails = "It is currently set to {0}.".Localize().FormatWith(
settings.GetValue <double>(SettingsKey.min_fan_speed)),
});
}
if (settings.GetValue <double>(SettingsKey.max_fan_speed) > 100)
{
errors.Add(
new SettingsValidationError(SettingsKey.max_fan_speed)
{
Error = "The {0} can only go as high as 100%.".Localize().FormatWith(
GetSettingsName(SettingsKey.max_fan_speed)),
ValueDetails = "It is currently set to {0}.".Localize().FormatWith(
settings.GetValue <double>(SettingsKey.max_fan_speed)),
});
}
if (extruderCount < 1)
{
errors.Add(
new SettingsValidationError(SettingsKey.extruder_count)
{
Error = "The {0} must be at least 1.".Localize().FormatWith(
GetSettingsName(SettingsKey.extruder_count)),
ValueDetails = "It is currently set to {0}.".Localize().FormatWith(extruderCount),
});
}
if (settings.GetValue <double>(SettingsKey.fill_density) < 0 || settings.GetValue <double>(SettingsKey.fill_density) > 1)
{
errors.Add(
new SettingsValidationError(SettingsKey.fill_density)
{
Error = "The {0} must be between 0 and 1.".Localize().FormatWith(
GetSettingsName(SettingsKey.fill_density)),
ValueDetails = "It is currently set to {0}.".Localize().FormatWith(
settings.GetValue <double>(SettingsKey.fill_density)),
});
}
// marlin firmware can only take a max of 128 bytes in a single instruction, make sure no lines are longer than that
ValidateGCodeLinesShortEnough(SettingsKey.cancel_gcode, printer, errors);
ValidateGCodeLinesShortEnough(SettingsKey.connect_gcode, printer, errors);
ValidateGCodeLinesShortEnough(SettingsKey.end_gcode, printer, errors);
ValidateGCodeLinesShortEnough(SettingsKey.layer_gcode, printer, errors);
ValidateGCodeLinesShortEnough(SettingsKey.pause_gcode, printer, errors);
ValidateGCodeLinesShortEnough(SettingsKey.resume_gcode, printer, errors);
ValidateGCodeLinesShortEnough(SettingsKey.start_gcode, printer, errors);
// If the given speed is part of the current slice engine then check that it is greater than 0.
ValidateGoodSpeedSettingGreaterThan0(SettingsKey.bridge_speed, printer, errors);
ValidateGoodSpeedSettingGreaterThan0(SettingsKey.air_gap_speed, printer, errors);
ValidateGoodSpeedSettingGreaterThan0(SettingsKey.external_perimeter_speed, printer, errors);
ValidateGoodSpeedSettingGreaterThan0(SettingsKey.first_layer_speed, printer, errors);
ValidateGoodSpeedSettingGreaterThan0(SettingsKey.infill_speed, printer, errors);
ValidateGoodSpeedSettingGreaterThan0(SettingsKey.perimeter_speed, printer, errors);
ValidateGoodSpeedSettingGreaterThan0(SettingsKey.small_perimeter_speed, printer, errors);
ValidateGoodSpeedSettingGreaterThan0(SettingsKey.solid_infill_speed, printer, errors);
ValidateGoodSpeedSettingGreaterThan0(SettingsKey.support_material_speed, printer, errors);
ValidateGoodSpeedSettingGreaterThan0(SettingsKey.top_solid_infill_speed, printer, errors);
ValidateGoodSpeedSettingGreaterThan0(SettingsKey.travel_speed, printer, errors);
ValidateGoodSpeedSettingGreaterThan0(SettingsKey.retract_speed, printer, errors);
}
catch (Exception e)
{
errors.Add(
new ValidationError("ExceptionDuringSliceSettingsValidation")
{
Error = "Unexpected error validating settings".Localize(),
Details = e.Message
});
}
return(errors);
}
