public void ReceiveMessageFailedIfWasNotProcessed()
{
const string hostAddress = "tcp://localhost:5555";
var loggingMessages = new List<string>();
var serviceName = "echo";
Guid requestId = Guid.Empty;
using (var broker = new RouterSocket())
using (var poller = new NetMQPoller())
using (var session = new MDPClientAsync(hostAddress))
{
broker.Bind(hostAddress);
// we need to pick up any message in order to avoid errors
broker.ReceiveReady += (s, e) =>
{
// doesn't reply to client
var msg = e.Socket.ReceiveMultipartMessage();
};
session.LogInfoReady += (s, e) => loggingMessages.Add(e.Info);
session.ReplyReady += (s, e) =>
{
Assert.IsTrue(false, "I'm not supposed to receive replies since broker is not sending them");
poller.Stop();
};
session.FailedRequest += (s, e) =>
{
Assert.That(requestId, Is.Not.EqualTo(Guid.Empty));
Assert.That(e.RequestId, Is.EqualTo(requestId));
poller.Stop();
};
poller.Add(broker);
var task = Task.Factory.StartNew(() => poller.Run());
var requestMessage = new NetMQMessage(new[] { new NetMQFrame("REQUEST") });
requestId = session.Send(serviceName, requestMessage);
var result = task.Wait(session.Timeout + session.Timeout);
Assert.IsTrue(result, $"During {session.Timeout}ms was not received a FailedReply");
}
}
public void ReconnectToBrokerIfIsNotReplying()
{
const string hostAddress = "tcp://localhost:5555";
const int timeOutToReconnectInMillis = 7500;
var loggingMessages = new List<string>();
var serviceName = "echo";
var messagesReceivedOnBroker = 0;
// setup the counter socket for communication
using (var broker = new RouterSocket())
using (var poller = new NetMQPoller())
using (var session = new MDPClientAsync(hostAddress))
{
session.Timeout = TimeSpan.FromMilliseconds(timeOutToReconnectInMillis);
broker.Bind(hostAddress);
broker.ReceiveReady += (s, e) =>
{
var msg = e.Socket.ReceiveMultipartMessage();
if (messagesReceivedOnBroker != 0) // doesn't respond if is the first message received!
{
// we expect to receive a 4 Frame message
// [client adrR][e][mdp header][service][request]
if (msg.FrameCount != 6)
Assert.Fail("Message with wrong count of frames {0}", msg.FrameCount);
// REQUEST socket will strip the his address + empty frame
// ROUTER has to add the address prelude in order to identify the correct socket(!)
var requestId = msg.Last.ConvertToString(); // get the requestId string
msg.RemoveFrame(msg.Last); // remove the request frame
var request = msg.Last.ConvertToString(); // get the request string
msg.RemoveFrame(msg.Last); // remove the request frame
msg.Append(new NetMQFrame(request + " OK")); // append the reply frame
msg.Append(requestId);
e.Socket.SendMultipartMessage(msg);
}
messagesReceivedOnBroker++;
};
session.LogInfoReady += (s, e) => loggingMessages.Add(e.Info);
session.ReplyReady += (s, e) =>
{
var reply = e.Reply;
Assert.That(reply.FrameCount, Is.EqualTo(1));
Assert.That(reply.First.ConvertToString(), Is.EqualTo("REQUEST OK"));
poller.Stop();
};
var requestMessage = new NetMQMessage(new[] { new NetMQFrame("REQUEST") });
int timeOutInMillis = timeOutToReconnectInMillis + 3000; // Waits for the timeOut on the client
var timer = new NetMQTimer(timeOutInMillis);
timer.Elapsed += (s, e) =>
{
session.Send(serviceName, requestMessage); // resends the request after timeout
};
poller.Add(timer);
poller.Add(broker);
var task = Task.Factory.StartNew(() => poller.Run());
session.Send(serviceName, requestMessage);
var result = task.Wait(timeOutToReconnectInMillis * 2);
var numberOfConnects = loggingMessages.FindAll(x => x.Contains("[CLIENT] connecting to broker")).Count;
Assert.IsTrue(numberOfConnects > 1);
}
}
public void SendWrongMDPVersionFromBrokerNoLoggingShouldThrowApplicationException()
{
const string hostAddress = "tcp://localhost:5555";
// setup the counter socket for communication
using (var broker = new RouterSocket())
using (var poller = new NetMQPoller())
using (var session = new MDPClientAsync(hostAddress))
{
broker.Bind(hostAddress);
// we need to pick up any message in order to avoid errors
broker.ReceiveReady += (s, e) =>
{
// return empty reply
var msg = e.Socket.ReceiveMultipartMessage();
// we expect to receive a 4 Frame message
// [REQ ADR][EMPTY]["MDPC01"]["echo"]["REQUEST"][requestId]
if (msg.FrameCount != 6)
Assert.Fail("Message with wrong count of frames {0}", msg.FrameCount);
// REQUEST socket will strip the his address + empty frame
// ROUTER has to add the address prelude in order to identify the correct socket(!)
// [REQ ADR][EMPTY]["MDPC00"]["echo"]["REQUEST"][requestId]
var clientAddress = msg.Pop();
msg.Pop(); // forget empty frame
msg.Pop(); // drop the MDP Version Frame
msg.Push("MDPC00"); // insert wrong MDP version
msg.Push(NetMQFrame.Empty);
msg.Push(clientAddress); // reinsert the client's address
e.Socket.SendMultipartMessage(msg);
};
int timeOutInMillis = 10000;
var timer = new NetMQTimer(timeOutInMillis); // Used so it doesn't block if something goes wrong!
timer.Elapsed += (s, e) =>
{
Assert.Fail($"Waited {timeOutInMillis} and had no response from broker");
poller.Stop();
};
poller.Add(broker);
poller.Add(timer);
session.ReplyReady += (s, e) =>
{
Assert.True(e.HasError());
Assert.That(e.Exception.Message, Is.StringContaining("MDP Version mismatch"));
poller.Stop(); // To unlock the Task.Wait()
};
session.FailedRequest += (s, e) =>
{
Assert.True(e.HasError());
Assert.That(e.Exception.Message, Is.StringContaining("MDP Version mismatch"));
poller.Stop(); // To unlock the Task.Wait()
};
var task = Task.Factory.StartNew(() => poller.Run());
var requestMessage = new NetMQMessage(new[] { new NetMQFrame("REQUEST") });
session.Send("echo", requestMessage);
task.Wait();
}
}
public void SendWithSpaceServiceNameWithLoggingShouldThrowApplicationException()
{
const string hostAddress = "tcp://localhost:5555";
var loggingMessages = new List<string>();
// setup the counter socket for communication
using (var session = new MDPClientAsync(hostAddress))
{
// set the event handler to receive the logging messages
session.LogInfoReady += (s, e) => loggingMessages.Add(e.Info);
var requestMessage = new NetMQMessage(new[] { new NetMQFrame("REQUEST") });
try
{
session.Send(" ", requestMessage);
}
catch (ApplicationException ex)
{
Assert.That(ex.Message, Is.EqualTo("serviceName must not be empty or null."));
}
Assert.That(loggingMessages.Count, Is.EqualTo(0));
}
}
public void SendEmptyReplyFromBrokerWithLoggingShouldThrowApplicationException()
{
const string hostAddress = "tcp://localhost:5555";
var loggingMessages = new List<string>();
// setup the counter socket for communication
using (var broker = new RouterSocket())
using (var poller = new NetMQPoller())
using (var session = new MDPClientAsync(hostAddress))
{
broker.Bind(hostAddress);
// we need to pick up any message in order to avoid errors
broker.ReceiveReady += (s, e) =>
{
// return empty reply
var msg = e.Socket.ReceiveMultipartMessage();
// we expect to receive a 4 Frame message
// [REQ ADR][EMPTY]["MDPC01"]["echo"]["REQUEST"][requestId]
if (msg.FrameCount != 6)
Assert.Fail("Message with wrong count of frames {0}", msg.FrameCount);
// REQUEST socket will strip the his address + empty frame
// ROUTER has to add the address prelude in order to identify the correct socket(!)
// [REQ ADR][EMPTY]["MDPC01"]["echo"]["REQUEST"][requestId]
e.Socket.SendMultipartMessage(msg);
};
session.LogInfoReady += (s, e) => loggingMessages.Add(e.Info);
session.ReplyReady += (s, e) =>
{
Assert.That(loggingMessages.Count, Is.EqualTo(3));
Assert.That(loggingMessages[0], Is.EqualTo("[CLIENT] connecting to broker at tcp://localhost:5555"));
Assert.That(loggingMessages[1].Contains("[CLIENT INFO] sending"), Is.True);
Assert.That(loggingMessages[2].Contains("[CLIENT INFO] received"), Is.True);
poller.Stop(); // To unlock the Task.Wait()
};
poller.Add(broker);
var task = Task.Factory.StartNew(() => poller.Run());
// well formed message
var requestMessage = new NetMQMessage(new[] { new NetMQFrame("REQUEST") });
// correct call
session.Send("echo", requestMessage);
int timeOutInMillis = 10000;
var timer = new NetMQTimer(timeOutInMillis); // Used so it doesn't block if something goes wrong!
timer.Elapsed += (s, e) =>
{
Assert.Fail($"Waited {timeOutInMillis} and had no response from broker");
poller.Stop();
};
poller.Add(timer);
task.Wait();
}
}
public void SendCorrectInputWithLoggingShouldReturnCorrectReply()
{
const string hostAddress = "tcp://localhost:5555";
var loggingMessages = new List<string>();
var serviceName = "echo";
using (var broker = new RouterSocket())
using (var poller = new NetMQPoller())
using (var session = new MDPClientAsync(hostAddress))
{
broker.Bind(hostAddress);
// we need to pick up any message in order to avoid errors
broker.ReceiveReady += (s, e) =>
{
var msg = e.Socket.ReceiveMultipartMessage();
// we expect to receive a 4 Frame message
// [client adrR][e][mdp header][service][request]
if (msg.FrameCount != 6)
Assert.Fail("Message with wrong count of frames {0}", msg.FrameCount);
// REQUEST socket will strip the his address + empty frame
// ROUTER has to add the address prelude in order to identify the correct socket(!)
// [client adr][e][mdp header][service][reply][requestId]
var requestId = msg.Last.ConvertToString(); // get the requestId string
msg.RemoveFrame(msg.Last); // remove the request frame
var request = msg.Last.ConvertToString(); // get the request string
msg.RemoveFrame(msg.Last); // remove the request frame
msg.Append(new NetMQFrame(request + " OK")); // append the reply frame
msg.Append(requestId);
e.Socket.SendMultipartMessage(msg);
};
session.LogInfoReady += (s, e) => loggingMessages.Add(e.Info);
session.ReplyReady += (s, e) =>
{
var reply = e.Reply;
Assert.That(reply.FrameCount, Is.EqualTo(1));
Assert.That(reply.First.ConvertToString(), Is.EqualTo("REQUEST OK"));
poller.Stop();
};
int timeOutInMillis = 10000;
var timer = new NetMQTimer(timeOutInMillis); // Used so it doesn't block if something goes wrong!
timer.Elapsed += (s, e) =>
{
Assert.Fail($"Waited {timeOutInMillis} and had no response from broker");
poller.Stop();
};
poller.Add(broker);
poller.Add(timer);
var task = Task.Factory.StartNew(() => poller.Run());
var requestMessage = new NetMQMessage(new[] { new NetMQFrame("REQUEST") });
session.Send(serviceName, requestMessage);
task.Wait();
Assert.That(loggingMessages.Count, Is.EqualTo(3));
Assert.That(loggingMessages[0], Is.EqualTo("[CLIENT] connecting to broker at tcp://localhost:5555"));
Assert.That(loggingMessages[1].Contains("[CLIENT INFO] sending"), Is.True);
Assert.That(loggingMessages[2].Contains("[CLIENT INFO] received"), Is.True);
}
}
/// <summary>
/// usage: MDPClientAsyncExample [-v] [-rn] (1 ;lt n ;lt 100000 / Default == 10)
///
/// implements a MDPClientAsync API usage
/// </summary>
private static void Main(string[] args)
{
if (args.Length == 1 || args.Length > 2)
{
if (!(args[0] == "-v" || args[0].Contains("-r")))
{
Console.WriteLine("MDPClientExample [-v(erbose) OR -h(elp)]");
Console.WriteLine("\t-v => verbose");
Console.WriteLine("\tto stop processing use CTRL+C");
return;
}
}
const string service_name = "echo";
const int max_runs = 100000;
bool verbose = false;
int runs = 10;
if (args.Length >= 1)
{
if (args.Length == 1 && args[0] == "-v")
verbose = true;
else if (args.Length == 2)
verbose = args[0] == "-v" || args[1] == "-v";
if (args[0].Contains("-r") || args.Length > 1)
{
if (args[0].Contains("-r"))
runs = GetInt(args[0]);
else if (args[1].Contains("-r"))
runs = GetInt(args[1]);
}
}
runs = runs == -1 ? 10 : runs > max_runs ? max_runs : runs;
var id = new[] { (byte)'C', (byte)'1' };
var watch = new Stopwatch();
Console.WriteLine("Starting MDPClient and will send {0} requests to service <{1}>.", runs, service_name);
Console.WriteLine("(writes '.' for every 100 and '|' for every 1000 requests)\n");
try
{
// create MDP client and set verboseness && use automatic disposal
using (var session = new MDPClientAsync("tcp://localhost:5555", id))
{
if (verbose)
session.LogInfoReady += (s, e) => Console.WriteLine("{0}", e.Info);
session.ReplyReady += (s, e) => Console.WriteLine("{0}", e.Reply);
// just give everything time to settle in
Thread.Sleep(500);
watch.Start();
for (int count = 0; count < runs; count++)
{
var request = new NetMQMessage();
// set the request data
request.Push("Hello World!");
// send the request to the service
session.Send(service_name, request);
if (count % 1000 == 0)
Console.Write("|");
else
if (count % 100 == 0)
Console.Write(".");
}
watch.Stop();
Console.Write("\nStop receiving with any key!");
Console.ReadKey();
}
}
catch (Exception ex)
{
Console.WriteLine("ERROR:");
Console.WriteLine(ex.Message);
Console.WriteLine(ex.StackTrace);
return;
}
var time = watch.Elapsed;
Console.WriteLine("{0} request/replies in {1} ms processed! Took {2:N3} ms per REQ/REP",
runs,
time.TotalMilliseconds,
time.TotalMilliseconds / runs);
Console.Write("\nExit with any key!");
Console.ReadKey();
}