//Calls the Line routing algorithm and populates the points collection of the connector.
void RoutePolyLine(Connector connector)
{
Point[] pts = ConnectorRouter.Route(this, FreeFormPanel.GetSourceConnectionPoint(connector), FreeFormPanel.GetDestinationConnectionPoint(connector));
List<Point> points = new List<Point>(pts);
if (pts != null)
{
UpdateConnectorPoints(connector, points);
}
}
internal ConnectorCreationResult CreateConnectorGesture(ConnectionPoint sourceConnectionPoint, UIElement dest, Connector referenceConnector, bool isConnectorStartMoved)
{
ConnectionPoint destConnectionPoint = GetClosestDestConnectionPoint(sourceConnectionPoint, dest);
if (destConnectionPoint != null)
{
return CreateConnectorGesture(sourceConnectionPoint, destConnectionPoint, referenceConnector, isConnectorStartMoved);
}
return ConnectorCreationResult.OtherFailure;
}
public void UpdateConnectorPoints(Connector connector, List<Point> points)
{
PointCollection pointCollection = new PointCollection();
foreach (Point point in points)
{
pointCollection.Add(new Point(point.X < 0 ? 0 : point.X, point.Y < 0 ? 0 : point.Y));
}
connector.Points = pointCollection;
OnLocationChanged(connector, null);
}
// referenceConnector is used when we are re-linking the connector.
internal ConnectorCreationResult CreateConnectorGesture(ConnectionPoint sourceConnectionPoint, ConnectionPoint destConnectionPoint, Connector referenceConnector, bool isConnectorStartMoved)
{
Debug.Assert(this.IsOutmostStateContainerEditor(), "Should only be called by the outmost editor.");
Debug.Assert(sourceConnectionPoint != null, "sourceConnectionPoint is null.");
Debug.Assert(destConnectionPoint != null, "destConnectionPoint is null.");
ConnectorCreationResult result = ConnectorCreationResult.OtherFailure;
if (destConnectionPoint.PointType != ConnectionPointType.Outgoing && sourceConnectionPoint.PointType != ConnectionPointType.Incoming)
{
if (sourceConnectionPoint.ParentDesigner is StateDesigner)
{
bool sameDestination = false;
ModelItem refTransitionModelItem = null;
if(referenceConnector != null)
{
refTransitionModelItem = StateContainerEditor.GetConnectorModelItem(referenceConnector);
ModelItem destStateModelItem = ((StateDesigner)destConnectionPoint.ParentDesigner).ModelItem;
if (refTransitionModelItem != null && refTransitionModelItem.Properties[TransitionDesigner.ToPropertyName].Value == destStateModelItem)
{
sameDestination = true;
}
}
// We do not allow transitions to composite states unless we don't change the transition destination
// (e.g., we are moving the start of a connector).
if (!sameDestination && !((StateDesigner)destConnectionPoint.ParentDesigner).IsSimpleState())
{
result = ConnectorCreationResult.CannotCreateTransitionToCompositeState;
}
// We do not allow transitions from an ancestor to its descendant
else if (StateContainerEditor.IsDescendantStateOf(((StateDesigner)destConnectionPoint.ParentDesigner).ModelItem, ((StateDesigner)sourceConnectionPoint.ParentDesigner).ModelItem))
{
result = ConnectorCreationResult.CannotCreateTransitionFromAncestorToDescendant;
}
else
{
using (EditingScope es = (EditingScope)this.ModelItem.BeginEdit(SR.CreateTransition))
{
if (refTransitionModelItem != null)
{
this.CreateTransition(sourceConnectionPoint, destConnectionPoint, refTransitionModelItem, isConnectorStartMoved);
}
else
{
this.CreateTransition(sourceConnectionPoint, destConnectionPoint, null, false);
}
result = ConnectorCreationResult.Success;
es.Complete();
}
}
}
else if (sourceConnectionPoint.ParentDesigner is InitialNode)
{
StateDesigner destDesigner = (StateDesigner)destConnectionPoint.ParentDesigner;
// We only allow simple states to be set as the initial state
if (!destDesigner.IsSimpleState())
{
result = ConnectorCreationResult.CannotSetCompositeStateAsInitialState;
}
else if (destDesigner.IsFinalState())
{
result = ConnectorCreationResult.CannotSetFinalStateAsInitialState;
}
else
{
ModelItem destModelItem = destDesigner.ModelItem;
using (EditingScope es = (EditingScope)this.ModelItem.BeginEdit(SR.SetInitialState))
{
this.StateMachineModelItem.Properties[StateMachineDesigner.InitialStatePropertyName].SetValue(destModelItem);
PointCollection connectorViewState = new PointCollection(ConnectorRouter.Route(this.panel, sourceConnectionPoint, destConnectionPoint));
this.StoreConnectorLocationViewState(this.StateMachineModelItem, connectorViewState, true);
result = ConnectorCreationResult.Success;
es.Complete();
}
}
}
}
return result;
}
void StoreConnectorLocationViewState(Connector connector, bool isUndoableViewState)
{
//This method will be called whenever the FreeFormPanel raises a location changed event on a connector.
//Such location changed events are a result of changes already committed in the UI. Hence we do not want to react to such view state changes.
//Using internalViewStateChange flag for that purpose.
this.internalViewStateChange = true;
this.StoreConnectorLocationViewState(StateContainerEditor.GetConnectorModelItem(connector), connector.Points, isUndoableViewState);
this.internalViewStateChange = false;
}
void OnConnectorMouseDown(object sender, MouseButtonEventArgs e)
{
Connector connector = (Connector)sender;
if (this.panel.Children.Contains(connector))
{
this.selectedConnector = connector;
}
// In order to not let WorkflowViewElement handle the event, which would cause the
// ConnectorEditor to be removed.
e.Handled = true;
}
internal void DeleteConnectorModelItem(Connector connector)
{
ModelItem connectorModelItem = StateContainerEditor.GetConnectorModelItem(connector);
if (connectorModelItem.ItemType == typeof(Transition))
{
StateContainerEditor.GetParentStateModelItemForTransition(connectorModelItem).Properties[StateDesigner.TransitionsPropertyName].Collection.Remove(connectorModelItem);
}
// Connector from initial node
else if (connectorModelItem.ItemType == typeof(StateMachine))
{
using (EditingScope es = (EditingScope)this.ModelItem.BeginEdit(SR.ClearInitialState))
{
connectorModelItem.Properties[StateMachineDesigner.InitialStatePropertyName].SetValue(null);
es.Complete();
}
}
}
Connector CreateConnector(ConnectionPoint srcConnPoint, ConnectionPoint destConnPoint, PointCollection points, ModelItem connectorModelItem)
{
Debug.Assert(this.IsOutmostStateContainerEditor(), "Should only be called by the outmost editor.");
Connector connector = new Connector();
connector.FocusVisualStyle = null;
connector.Focusable = true;
DesignerView.SetCommandMenuMode(connector, CommandMenuMode.NoCommandMenu);
if (connectorModelItem != null && connectorModelItem.ItemType == typeof(Transition))
{
SetConnectorLabel(connector, connectorModelItem);
SetConnectorStartDotToolTip(connector.startDotGrid, connectorModelItem);
connector.IsTransition = true;
connector.ToolTip = SR.EditTransitionTooltip;
connector.startDotGrid.MouseDown += new MouseButtonEventHandler(OnConnectorStartDotMouseDown);
connector.startDotGrid.MouseUp += new MouseButtonEventHandler(OnConnectorStartDotMouseUp);
}
connector.GotKeyboardFocus += new KeyboardFocusChangedEventHandler(OnConnectorGotKeyboardFocus);
connector.RequestBringIntoView += new RequestBringIntoViewEventHandler(OnConnectorRequestBringIntoView);
connector.GotFocus += new RoutedEventHandler(OnConnectorGotFocus);
connector.LostFocus += new RoutedEventHandler(OnConnectorLostFocus);
connector.MouseDoubleClick += new MouseButtonEventHandler(OnConnectorMouseDoubleClick);
connector.MouseDown += new MouseButtonEventHandler(OnConnectorMouseDown);
connector.KeyDown += new KeyEventHandler(OnConnectorKeyDown);
connector.ContextMenuOpening += new ContextMenuEventHandler(OnConnectorContextMenuOpening);
SetConnectorSrcDestConnectionPoints(connector, srcConnPoint, destConnPoint);
StateContainerEditor.SetConnectorModelItem(connector, connectorModelItem);
connector.Unloaded += new RoutedEventHandler(OnConnectorUnloaded);
connector.Points = points;
return connector;
}
void OnConnectorGotFocus(object sender, RoutedEventArgs e)
{
Connector connector = e.Source as Connector;
if (this.panel.connectorEditor == null || !connector.Equals(this.panel.connectorEditor.Connector))
{
this.panel.RemoveConnectorEditor();
this.panel.connectorEditor = new ConnectorEditor(this.panel, connector);
}
if (this.panel.Children.Contains(connector))
{
ModelItem connectorModelItem = StateContainerEditor.GetConnectorModelItem(connector);
Selection newSelection = new Selection();
if (connectorModelItem != null && connectorModelItem.ItemType == typeof(Transition))
{
newSelection = new Selection(connectorModelItem);
}
this.Context.Items.SetValue(newSelection);
this.selectedConnector = connector;
e.Handled = true;
}
}
void ClearSelectedConnector()
{
if (this.panel.connectorEditor != null && this.panel.connectorEditor.Connector == this.selectedConnector)
{
this.panel.RemoveConnectorEditor();
}
this.selectedConnector = null;
}
void UpdateStateMachineOnConnectorMoved(ConnectionPoint knownConnectionPoint, Point newPoint, Connector movedConnector, bool isConnectorStartMoved)
{
HitTestResult hitTestResult = VisualTreeHelper.HitTest(this.panel, newPoint);
if (hitTestResult == null)
{
return;
}
UIElement newViewElement = null;
ConnectionPoint newConnectionPoint = null;
//The case where the Connector is dropped on a ConnectionPoint.
if (this.lastConnectionPointMouseUpElement != null)
{
newConnectionPoint = StateContainerEditor.ConnectionPointHitTest(this.lastConnectionPointMouseUpElement, newPoint);
if (newConnectionPoint != null)
{
newViewElement = this.lastConnectionPointMouseUpElement;
}
this.lastConnectionPointMouseUpElement = null;
}
//The case where the link is dropped on a shape.
if (newViewElement == null)
{
newViewElement = StateContainerEditor.GetVisualAncestor<WorkflowViewElement>(hitTestResult.VisualHit);
}
if (newViewElement != null)
{
if (this.panel.IsAncestorOf(newViewElement))
{
using (EditingScope es = (EditingScope)this.ModelItem.BeginEdit(SR.MoveLink))
{
// Remove the old connector ModelItem
this.DeleteConnectorModelItem(movedConnector);
// Create new connector
ConnectorCreationResult result = ConnectorCreationResult.OtherFailure;
if (!isConnectorStartMoved)
{
if (newConnectionPoint == null)
{
result = CreateConnectorGesture(knownConnectionPoint, newViewElement, movedConnector, false);
}
else
{
result = CreateConnectorGesture(knownConnectionPoint, newConnectionPoint, movedConnector, false);
}
}
else
{
// Don't allow moving the start of the initial node connector to a state
if (!(newViewElement is StateDesigner && StateContainerEditor.IsConnectorFromInitialNode(movedConnector)))
{
if (newConnectionPoint == null)
{
result = CreateConnectorGesture(newViewElement, knownConnectionPoint, movedConnector, true);
}
else
{
result = CreateConnectorGesture(newConnectionPoint, knownConnectionPoint, movedConnector, true);
}
}
}
if (result == ConnectorCreationResult.Success)
{
es.Complete();
}
else
{
StateContainerEditor.ReportConnectorCreationError(result);
es.Revert();
}
}
}
}
}
void RemoveConnectorOnOutmostEditor(Connector connector)
{
ConnectionPoint srcConnectionPoint = FreeFormPanel.GetSourceConnectionPoint(connector);
ConnectionPoint destConnectionPoint = FreeFormPanel.GetDestinationConnectionPoint(connector);
// Update ConnectionPoints
srcConnectionPoint.AttachedConnectors.Remove(connector);
destConnectionPoint.AttachedConnectors.Remove(connector);
StateContainerEditor outmostContainer = this.GetOutmostStateContainerEditor();
outmostContainer.panel.Children.Remove(connector);
if (outmostContainer.selectedConnector == connector)
{
outmostContainer.ClearSelectedConnector();
}
}
void OnStateContainerGridPreviewMouseDown(object sender, MouseButtonEventArgs e)
{
this.selectedConnector = null;
}
private void MeasureChildren(out double height, out double width)
{
height = 0;
width = 0;
Point pt = new Point(0, 0);
bool isOutmostPanel = this.IsOutmostPanel();
foreach (UIElement child in Children)
{
Connector connectorChild = child as Connector;
if (connectorChild != null && isOutmostPanel)
{
pt = new Point(0, 0);
if (measureConnectors)
{
Point srcPoint = FreeFormPanel.GetLocationRelativeToOutmostPanel(FreeFormPanel.GetSourceConnectionPoint(connectorChild));
Point destPoint = FreeFormPanel.GetLocationRelativeToOutmostPanel(FreeFormPanel.GetDestinationConnectionPoint(connectorChild));
if (connectorChild.Points.Count == 0 ||
(DesignerGeometryHelper.DistanceBetweenPoints(connectorChild.Points[0], srcPoint) > 1) ||
(DesignerGeometryHelper.DistanceBetweenPoints(connectorChild.Points[connectorChild.Points.Count - 1], destPoint) > 1))
{
connectorChild.Points = new PointCollection();
RoutePolyLine(connectorChild);
}
connectorChild.Measure(new Size(Double.PositiveInfinity, Double.PositiveInfinity));
}
else
{
continue;
}
}
else //Measure non-connector elements.
{
child.Measure(new Size(Double.PositiveInfinity, Double.PositiveInfinity));
if (!child.DesiredSize.Equals(((Size)FreeFormPanel.GetChildSize(child))))
{
FreeFormPanel.SetChildSize(child, child.DesiredSize);
}
pt = FreeFormPanel.GetLocation(child);
if (pt.X == 0 && pt.Y == 0)
{
pt = new Point(LeftStackingMargin, lastYPosition);
OnLocationChanged(child, new LocationChangedEventArgs(pt));
FreeFormPanel.SetLocation(child, pt);
lastYPosition += child.DesiredSize.Height + VerticalStackingDistance;
}
}
if (height < child.DesiredSize.Height + pt.Y)
{
height = child.DesiredSize.Height + pt.Y;
}
if (width < child.DesiredSize.Width + pt.X)
{
width = child.DesiredSize.Width + pt.X;
}
}
width = (width < this.MinWidth) ? this.MinWidth : width;
height = (height < this.MinHeight) ? this.MinHeight : height;
}
