public unsafe override int ReadForward(Stream s, byte[] bulk, BlockDBEntry *entriesPtr)
{
long pos = s.Position;
// Version 2 expects all chunks to be aligned to 4096 bytes
if (pos < BlockSize)
{
s.Position = BlockSize; pos = BlockSize;
}
long remaining = s.Length - pos;
if (remaining == 0)
{
return(0);
}
int bytes = (int)Math.Min(remaining, BlockSize);
int offset = bulk.Length - BlockSize;
// NOTE: bulk and entriesPtr point to same thing
// But we read into the end of the bulk array, thus the entriesPtr pointing
// to start of array never ends up overlapping with the data being read
BlockDBFile.ReadFully(s, bulk, offset, bytes);
return(DecompressChunk(bulk, offset, entriesPtr));
}
/// <summary> Checks if the backing file exists on disc, and if not, creates it.
/// Also recreates the backing file if dimensions on disc are less than those in memory. </summary>
BlockDBFile ValidateBackingFile()
{
Vec3U16 fileDims;
BlockDBFile format = BlockDBFile.V1;
if (!File.Exists(FilePath))
{
using (Stream s = OpenWrite()) {
fileDims = Dims;
BlockDBFile.WriteHeader(s, fileDims);
}
}
else
{
using (Stream s = OpenRead()) {
format = BlockDBFile.ReadHeader(s, out fileDims);
}
if (fileDims.X < Dims.X || fileDims.Y < Dims.Y || fileDims.Z < Dims.Z)
{
BlockDBFile.ResizeBackingFile(this);
}
}
return(format);
}
void ReadDimensions()
{
if (!File.Exists(FilePath))
{
return;
}
using (Stream s = File.OpenRead(FilePath))
BlockDBFile.ReadHeader(s, out Dims);
}
/// <summary> Counts the total number of entries of BlockDB entries in memory and on disc. </summary>
public long TotalEntries()
{
using (IDisposable rLock = Locker.AccquireRead(5 * 1000)) {
if (rLock != null)
{
return(Cache.Count + BlockDBFile.CountEntries(MapName));
}
return(-1);
}
}
public unsafe override int ReadForward(Stream s, byte[] bulk, BlockDBEntry *entriesPtr)
{
long remaining = (s.Length - s.Position) / EntrySize;
int count = (int)Math.Min(remaining, BulkEntries);
if (count > 0)
{
BlockDBFile.ReadFully(s, bulk, 0, count * EntrySize);
}
return(count);
}
public override long CountEntries(Stream s)
{
byte[] data = new byte[8];
s.Position = 16;
BlockDBFile.ReadFully(s, data, 0, data.Length);
uint lo = (uint)ReadInt32(data, 0);
uint hi = (uint)ReadInt32(data, 4);
return((long)((ulong)lo | ((ulong)hi << 32)));
}
void WriteBuffer(bool force)
{
if (buffer.Count == 0)
{
return;
}
if (!force && buffer.Count < 4096)
{
return;
}
BlockDBFile.WriteEntries(stream, buffer);
buffer.Count = 0;
}
public unsafe override int ReadBackward(Stream s, byte[] bulk, BlockDBEntry *entriesPtr)
{
long pos = s.Position;
long remaining = (pos / EntrySize) - HeaderEntries;
int count = (int)Math.Min(remaining, BulkEntries);
if (count > 0)
{
pos -= count * EntrySize;
s.Position = pos;
BlockDBFile.ReadFully(s, bulk, 0, count * EntrySize);
s.Position = pos; // set correct position for next backward read
}
return(count);
}
/// <summary> Returns number of entries in the backing file on disc if it exists. </summary>
public static long CountEntries(string map)
{
string path = FilePath(map);
if (!File.Exists(path))
{
return(0);
}
using (Stream src = new FileStream(path, FileMode.OpenOrCreate, FileAccess.Read, FileShare.ReadWrite)) {
Vec3U16 dims;
BlockDBFile file = ReadHeader(src, out dims);
return(file.CountEntries(src));
}
}
/// <summary> Flushes the entries from the in-memory cache to disc. </summary>
/// <remarks> You must lock using Locker.AccquireWrite() **before** entering this method. </remarks>
public void FlushCache()
{
if (Cache.Head == null)
{
return;
}
BlockDBFile format = ValidateBackingFile();
using (Stream s = OpenWrite()) {
// This truncates the lower 4 bits off - so e.g. if a power off occurred
// and 21 bytes were in the file, this sets the position to byte 16
s.Position = s.Length & ~0x0F;
format.WriteEntries(s, Cache);
Cache.Clear();
}
}
public unsafe override int ReadBackward(Stream s, byte[] bulk, BlockDBEntry *entriesPtr)
{
long pos = s.Position;
if (pos > BlockSize)
{
int bytes = (int)Math.Min(pos - BlockSize, BlockSize);
int offset = bulk.Length - BlockSize;
pos -= bytes;
s.Position = pos;
BlockDBFile.ReadFully(s, bulk, offset, bytes);
s.Position = pos; // set correct position for next backward read
return(DecompressChunk(bulk, offset, entriesPtr));
}
return(0);
}
void SaveCbdbFile()
{
if (stream == null)
{
return;
}
stream.Close();
stream = null;
string dumpPath = BlockDBFile.DumpPath(mapName);
string filePath = BlockDBFile.FilePath(mapName);
if (File.Exists(filePath))
{
File.Delete(filePath);
}
File.Move(dumpPath, filePath);
}
void AppendCbdbFile()
{
string path = BlockDBFile.FilePath(mapName);
if (!File.Exists(path) || stream == null)
{
return;
}
byte[] bulk = new byte[4096];
using (Stream cbdb = File.OpenRead(path)) {
cbdb.Read(bulk, 0, BlockDBFile.EntrySize); // header
int read = 0;
while ((read = cbdb.Read(bulk, 0, 4096)) > 0)
{
stream.Write(bulk, 0, read);
}
}
}
/// <summary> Finds all block changes by the given player. </summary>
public void FindChangesBy(int id, Action <BlockDBEntry> output, out Vec3U16 dims)
{
dims = default(Vec3U16);
using (IDisposable readLock = locker.AccquireReadLock()) {
if (!File.Exists(FilePath))
{
return;
}
using (Stream s = File.OpenRead(FilePath)) {
BlockDBFile.ReadHeader(s, out dims);
BlockDBFile.IterateBackwards(s, e => {
if (e.PlayerID == id)
{
output(e);
}
});
}
}
}
public void WriteEntries()
{
using (IDisposable writeLock = locker.AccquireWriteLock()) {
if (Cache.Count == 0)
{
return;
}
ValidateBackingFile();
using (Stream s = File.OpenWrite(FilePath)) {
// This truncates the lower 4 bits off - so e.g. if a power off occurred
// and 21 bytes were in the file, this sets the position to byte 16
s.Position = s.Length & ~0x0F;
BlockDBFile.WriteEntries(s, Cache);
lock (CacheLock)
Cache = new FastList <BlockDBEntry>();
}
}
}
/// <summary> Outputs all block changes which affect the given coordinates. </summary>
/// <remarks> You must lock using Locker.AccquireRead() **before** entering this method. </remarks>
public void FindChangesAt(ushort x, ushort y, ushort z, Action <BlockDBEntry> output)
{
if (!File.Exists(FilePath))
{
FindInMemoryAt(x, y, z, output); return;
}
Vec3U16 dims;
using (Stream s = OpenRead()) {
BlockDBFile format = BlockDBFile.ReadHeader(s, out dims);
if (x >= dims.X || y >= dims.Y || z >= dims.Z)
{
return;
}
int index = (y * dims.Z + z) * dims.X + x;
format.FindChangesAt(s, index, output);
}
FindInMemoryAt(x, y, z, output);
}
/// <summary> Finds all block changes which affect the given coordinates. </summary>
public void FindChangesAt(ushort x, ushort y, ushort z, Action <BlockDBEntry> output)
{
using (IDisposable readLock = locker.AccquireReadLock()) {
if (!File.Exists(FilePath))
{
return;
}
using (Stream s = File.OpenRead(FilePath)) {
Vec3U16 dims;
BlockDBFile.ReadHeader(s, out dims);
if (x >= dims.X || y >= dims.Y || z >= dims.Z)
{
return;
}
int index = (y * dims.Z + z) * dims.X + x;
BlockDBFile.FindChangesAt(s, index, output);
}
}
}
/// <summary> Outputs all block changes by the given players. </summary>
/// <remarks> You must lock using Locker.AccquireRead() **before** entering this method. </remarks>
/// <returns> whether an entry before start time was reached. </returns>
public bool FindChangesBy(int[] ids, DateTime start, DateTime end,
out Vec3U16 dims, Action <BlockDBEntry> output)
{
int startDelta = ClampDelta(start.Subtract(Epoch));
int endDelta = ClampDelta(end.Subtract(Epoch));
dims = Dims;
if (FindInMemoryBy(ids, startDelta, endDelta, output))
{
return(true);
}
if (!File.Exists(FilePath))
{
return(false);
}
using (Stream s = OpenRead()) {
BlockDBFile format = BlockDBFile.ReadHeader(s, out dims);
return(format.FindChangesBy(s, ids, startDelta, endDelta, output));
}
}
/// <summary> Checks if the backing file exists on disc, and if not, creates it.
/// Also recreates the backing file if dimensions on disc are less than those in memory. </summary>
void ValidateBackingFile()
{
Vec3U16 fileDims;
if (!File.Exists(FilePath))
{
using (Stream s = File.OpenWrite(FilePath)) {
fileDims = Dims;
BlockDBFile.WriteHeader(s, fileDims);
}
}
else
{
using (Stream s = File.OpenRead(FilePath)) {
BlockDBFile.ReadHeader(s, out fileDims);
}
if (fileDims.X < Dims.X || fileDims.Y < Dims.Y || fileDims.Z < Dims.Z)
{
BlockDBFile.ResizeBackingFile(this);
}
}
}
object DumpRow(IDataRecord record, object arg)
{
if (errorOccurred)
{
return(arg);
}
try {
if (stream == null)
{
stream = File.Create(BlockDBFile.DumpPath(mapName));
string lvlPath = LevelInfo.MapPath(mapName);
dims = IMapImporter.Formats[0].ReadDimensions(lvlPath);
BlockDBFile.WriteHeader(stream, dims);
}
// Only log maps which have a used BlockDB to avoid spam
entriesWritten++;
if (entriesWritten == 10)
{
string progress = " (" + DBUpgrader.Progress + ")";
Logger.Log(LogType.SystemActivity, "Dumping BlockDB for " + mapName + progress);
}
UpdateBlock(record);
UpdateCoords(record);
UpdatePlayerID(record);
UpdateTimestamp(record);
buffer.Add(entry);
WriteBuffer(false);
} catch (Exception ex) {
Logger.LogError(ex);
errorOccurred = true;
}
return(arg);
}