public void StationaryMelee()
{
Board board = new Board(BoardCommon.GRID_12X8);
Combatant attacker = new Combatant("Attacker", board, new Point(5, 4));
Combatant defender = new Combatant("Defender", board, new Point(7, 4));
board.AddPawn(attacker);
board.AddPawn(defender);
attacker.Health = 10;
defender.Health = 10;
attacker.BaseStats = new Stats() {
Attack = 10,
Stamina = 10
};
MeleeAttackSkill attack = new MeleeAttackSkill(attacker, new Point[] { Point.Right, 2 * Point.Right }) {
ActionPoints = 3
};
attack.SetDirection(CardinalDirection.East);
attacker.AddSkill(attack);
attack.Fire();
board.BeginTurn();
Assert.AreEqual(10, attacker.ActionPoints);
board.Turn();
Assert.AreEqual(0, defender.Health);
Assert.AreEqual(7, attacker.ActionPoints);
}
/// <summary>
/// Lights up cells visible from the current position. Clear all lighting before calling.
/// </summary>
/// <param name="grid">The cell grid definition.</param>
/// <param name="gridPosn">The player's position within the grid.</param>
/// <param name="viewRadius">Maximum view distance; can be a fractional value.</param>
public static HashSet<Point> ComputeVisibility(Board board, Point gridPosn, float viewRadius)
{
//Debug.Assert(gridPosn.x >= 0 && gridPosn.x < grid.xDim);
//Debug.Assert(gridPosn.y >= 0 && gridPosn.y < grid.yDim);
HashSet<Point> visible = new HashSet<Point>();
// Viewer's cell is always visible.
visible.Add(gridPosn);
// Cast light into cells for each of 8 octants.
//
// The left/right inverse slope values are initially 1 and 0, indicating a diagonal
// and a horizontal line. These aren't strictly correct, as the view area is supposed
// to be based on corners, not center points. We only really care about one side of the
// wall at the edges of the octant though.
//
// NOTE: depending on the compiler, it's possible that passing the octant transform
// values as four integers rather than an object reference would speed things up.
// It's much tidier this way though.
for (int txidx = 0; txidx < s_octantTransform.Length; txidx++) {
CastLight(board, gridPosn, viewRadius, 1, 1.0f, 0.0f, s_octantTransform[txidx], visible);
}
return visible;
}
public void PawnMovedButNotInBoard()
{
Board board = new Board(BoardCommon.GRID_12X8);
Pawn pawn = new Pawn("Add", board, new Point(board.Width / 2, board.Height / 2));
// Expect an ArgumentException because the pawn doesn't exist on the board yet
Assert.Throws<ArgumentException>(delegate () {
pawn.Offset(Point.One);
}, "Offset was called on a Pawn that was not added to a Board");
}
public void GridWidthAndHeight()
{
int[,] grid = {
{0, 0, 0, 0 },
{0, 0, 0, 0 },
{0, 0, 0, 0 }
};
Board board = new Board(grid);
Assert.AreEqual(board.Width, 4);
Assert.AreEqual(board.Height, 3);
}
public void ApproachMeleeRange()
{
Board board = new Board( new int[,] {
{ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 },
{ 0, 1, 1, 1, 1, 1, 1, 1, 1, 0, 1, 0 },
{ 0, 1, 1, 1, 1, 1, 1, 1, 1, 0, 1, 0 },
{ 0, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 0 },
{ 0, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 0 },
{ 0, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 0 },
{ 0, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 0 },
{ 0, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 0 },
{ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 }
});
Combatant attacker = new Combatant("Attacker", board, new Point(1, 7));
Combatant defender = new Combatant("Defender", board, new Point(10, 1));
board.AddPawn(attacker);
board.AddPawn(defender);
attacker.Health = 10;
defender.Health = 10;
attacker.BaseStats = new Stats() {
Attack = 10,
Stamina = 25
};
attacker.AddPawnToView(defender);
MeleeAttackSkill attack = new MeleeAttackSkill(attacker, new Point[] { Point.Right, 2 * Point.Right }) {
ActionPoints = 3
};
attacker.AddSkill(attack);
WalkSkill walk = new WalkSkill(attacker);
attacker.AddSkill(walk);
LostGen.Decision.ApproachMeleeRange approach = new LostGen.Decision.ApproachMeleeRange(attacker);
approach.Target = defender;
approach.Setup();
approach.Run();
board.BeginTurn();
Assert.AreEqual(25, attacker.ActionPoints);
board.Turn();
Assert.AreEqual(new Point(10, 3), attacker.Position);
}
public void OnStateUpdate(LostGen.Board world)
{
var toRemove = _activePawns.Keys.Except(world.Pawns.Keys);
var toAdd = world.Pawns.Keys.Except(_activePawns.Keys);
foreach (var key in toRemove)
{
_activePawns[key].QueueFree();
}
foreach (var key in toAdd)
{
var pawn = (PawnCharacter)_pawnScene.Instance();
pawn.PlayerID = key;
AddChild(pawn);
pawn.OnStateUpdate(world);
}
}
public void CollisionTest()
{
// Arrange
Board board = new Board(BoardCommon.GRID_12X8);
Point pos1 = new Point(board.Width / 2, board.Height / 2); // Center of board
Point pos2 = pos1 + (3 * Point.Right); // Two tiles to the right of center
List<Point> footprint = new List<Point>(new Point[] {
Point.Zero, Point.Up, Point.Down, Point.Left, Point.Right
});
Pawn pawn1 = new Pawn("First", board, pos1, footprint, true, true, true);
Pawn pawn2 = new Pawn("Second", board, pos2, footprint, true, true, true);
board.AddPawn(pawn1);
board.AddPawn(pawn2);
bool p1Triggered = false;
bool p2Triggered = false;
Pawn.CollisionDelegate p1Collisions = delegate (Pawn source, Pawn other) {
p1Triggered = true;
Assert.AreSame(source, pawn1);
Assert.AreSame(other, pawn2);
};
Pawn.CollisionDelegate p2Collisions = delegate (Pawn source, Pawn other) {
p2Triggered = true;
Assert.AreSame(source, pawn2);
Assert.AreSame(other, pawn1);
};
pawn1.CollisionEntered += p1Collisions;
pawn2.CollisionEntered += p2Collisions;
// Act
pawn1.Position = pawn1.Position + Point.Right;
// Assert
Assert.IsTrue(p1Triggered, "Pawn 1's OnCollisionEnter was not triggered");
Assert.IsTrue(p2Triggered, "Pawn 2's OnCollisionEnter was not triggered");
}
public void MoveIntoWall()
{
Board board = new Board(BoardCommon.GRID_12X8);
Pawn pawn = new Pawn("Mover", board, Point.One, null, true, true);
board.AddPawn(pawn);
Point expectedPosition = new Point(2, 1);
bool moveRight = pawn.Offset(Point.Right);
Point position1 = pawn.Position;
bool moveUp = pawn.Offset(Point.Up);
Point position2 = pawn.Position;
Assert.IsTrue(moveRight, "Offset returned false when moving right");
Assert.AreEqual(expectedPosition, position1, "Pawn failed to move right to open tile");
Assert.IsFalse(moveUp, "Offset returned true when moving up into a wall");
Assert.AreEqual(expectedPosition, position2, "Pawn failed to stay on one goddamn place");
}
private void ArrangeBoard(int[,] grid, Point start, Point end, out Board board, out Combatant pawn)
{
board = new Board(grid);
pawn = new Combatant("Walker", board, Point.One);
Stats stats = new Stats() { Stamina = 100 };
pawn.BaseStats = stats;
board.AddPawn(pawn);
WalkSkill walk = new WalkSkill(pawn);
pawn.AddSkill(walk);
walk.SetTarget(end);
board.BeginTurn();
}
/// <summary>
/// Construct a new Node
/// </summary>
/// <param name="board"></param>
/// <param name="point"></param>
/// <param name="lookup"></param>
public Node(Board board, Point point, EdgeCostLookup lookup = null)
{
if (board == null) { throw new ArgumentNullException("board"); }
if (lookup == null) { throw new ArgumentNullException("lookup"); }
_board = board;
_point = point;
_edgeCostLookup = lookup;
}
/// <summary>
/// Recursively casts light into cells. Operates on a single octant.
/// </summary>
/// <param name="grid">The cell grid definition.</param>
/// <param name="gridPosn">The player's position within the grid.</param>
/// <param name="viewRadius">The view radius; can be a fractional value.</param>
/// <param name="startColumn">Current column; pass 1 as initial value.</param>
/// <param name="leftViewSlope">Slope of the left (upper) view edge; pass 1.0 as
/// the initial value.</param>
/// <param name="rightViewSlope">Slope of the right (lower) view edge; pass 0.0 as
/// the initial value.</param>
/// <param name="txfrm">Coordinate multipliers for the octant transform.</param>
///
/// Maximum recursion depth is (Ceiling(viewRadius)).
private static void CastLight(Board grid, Point gridPosn, float viewRadius,
int startColumn, float leftViewSlope, float rightViewSlope, OctantTransform txfrm, HashSet<Point> visible)
{
//Debug.Assert(leftViewSlope >= rightViewSlope);
// Used for distance test.
float viewRadiusSq = viewRadius * viewRadius;
int viewCeiling = (int)Math.Ceiling(viewRadius);
// Set true if the previous cell we encountered was blocked.
bool prevWasBlocked = false;
// As an optimization, when scanning past a block we keep track of the
// rightmost corner (bottom-right) of the last one seen. If the next cell
// is empty, we can use this instead of having to compute the top-right corner
// of the empty cell.
float savedRightSlope = -1;
int xDim = grid.Width;
int yDim = grid.Height;
// Outer loop: walk across each column, stopping when we reach the visibility limit.
for (int currentCol = startColumn; currentCol <= viewCeiling; currentCol++) {
int xc = currentCol;
// Inner loop: walk down the current column. We start at the top, where X==Y.
//
// TODO: we waste time walking across the entire column when the view area
// is narrow. Experiment with computing the possible range of cells from
// the slopes, and iterate over that instead.
for (int yc = currentCol; yc >= 0; yc--) {
// Translate local coordinates to grid coordinates. For the various octants
// we need to invert one or both values, or swap X for Y.
int gridX = gridPosn.X + xc * txfrm.xx + yc * txfrm.xy;
int gridY = gridPosn.Y + xc * txfrm.yx + yc * txfrm.yy;
// Range-check the values. This lets us avoid the slope division for blocks
// that are outside the grid.
//
// Note that, while we will stop at a solid column of blocks, we do always
// start at the top of the column, which may be outside the grid if we're (say)
// checking the first octant while positioned at the north edge of the map.
if (gridX < 0 || gridX >= xDim || gridY < 0 || gridY >= yDim) {
continue;
}
// Compute slopes to corners of current block. We use the top-left and
// bottom-right corners. If we were iterating through a quadrant, rather than
// an octant, we'd need to flip the corners we used when we hit the midpoint.
//
// Note these values will be outside the view angles for the blocks at the
// ends -- left value > 1, right value < 0.
float leftBlockSlope = (yc + 0.5f) / (xc - 0.5f);
float rightBlockSlope = (yc - 0.5f) / (xc + 0.5f);
// Check to see if the block is outside our view area. Note that we allow
// a "corner hit" to make the block visible. Changing the tests to >= / <=
// will reduce the number of cells visible through a corner (from a 3-wide
// swath to a single diagonal line), and affect how far you can see past a block
// as you approach it. This is mostly a matter of personal preference.
if (rightBlockSlope > leftViewSlope) {
// Block is above the left edge of our view area; skip.
continue;
} else if (leftBlockSlope < rightViewSlope) {
// Block is below the right edge of our view area; we're done.
break;
}
// This cell is visible, given infinite vision range. If it's also within
// our finite vision range, light it up.
//
// To avoid having a single lit cell poking out N/S/E/W, use a fractional
// viewRadius, e.g. 8.5.
//
// TODO: we're testing the middle of the cell for visibility. If we tested
// the bottom-left corner, we could say definitively that no part of the
// cell is visible, and reduce the view area as if it were a wall. This
// could reduce iteration at the corners.
float distanceSquared = xc * xc + yc * yc;
if (distanceSquared <= viewRadiusSq) {
visible.Add(new Point(gridX, gridY));
}
bool curBlocked = grid.IsOpaque(new Point(gridX, gridY));
if (prevWasBlocked) {
if (curBlocked) {
// Still traversing a column of walls.
savedRightSlope = rightBlockSlope;
} else {
// Found the end of the column of walls. Set the left edge of our
// view area to the right corner of the last wall we saw.
prevWasBlocked = false;
leftViewSlope = savedRightSlope;
}
} else {
if (curBlocked) {
// Found a wall. Split the view area, recursively pursuing the
// part to the left. The leftmost corner of the wall we just found
// becomes the right boundary of the view area.
//
// If this is the first block in the column, the slope of the top-left
// corner will be greater than the initial view slope (1.0). Handle
// that here.
if (leftBlockSlope <= leftViewSlope) {
CastLight(grid, gridPosn, viewRadius, currentCol + 1,
leftViewSlope, leftBlockSlope, txfrm, visible);
}
// Once that's done, we keep searching to the right (down the column),
// looking for another opening.
prevWasBlocked = true;
savedRightSlope = rightBlockSlope;
}
}
}
// Open areas are handled recursively, with the function continuing to search to
// the right (down the column). If we reach the bottom of the column without
// finding an open cell, then the area defined by our view area is completely
// obstructed, and we can stop working.
if (prevWasBlocked) {
break;
}
}
}
public void OnStateUpdate(LostGen.Board state)
{
var self = state.Pawns[PlayerID];
Translation = new Vector3(self.Position.X, self.Position.Y, self.Position.Z);
}
public void SolidPawnsMoveIntoSharedCell()
{
Board board = new Board(BoardCommon.GRID_12X8);
Point pos1 = new Point(6, 4);
Point pos2 = new Point(8, 4);
Point pos3 = new Point(7, 4);
Pawn pawn1 = new Pawn("First", board, pos1, null, true, true, true);
Pawn pawn2 = new Pawn("Second", board, pos2, null, true, true, true);
board.AddPawn(pawn1);
board.AddPawn(pawn2);
Assert.IsTrue(pawn1.Offset(Point.Right),"Pawn tried to move from " + pos1 + " to " + pos3 + " but was blocked by something");
Assert.IsFalse(pawn2.Offset(Point.Left), "Pawn moved from " + pos2 + " to " + pos3 + " when it should've been blocked");
Assert.AreEqual(pos3, pawn1.Position, "Pawn was not able to move from " + pos1 + " to " + pos3);
Assert.AreEqual(pos2, pawn2.Position, "Pawn was able to move from " + pos3 + " to " + pos2);
}
public void MoveSolidPawnIntoSolidPawn()
{
Board board = new Board(BoardCommon.GRID_12X8);
Point pos1 = new Point(6, 4);
Point pos2 = new Point(8, 4);
Pawn pawn1 = new Pawn("First", board, pos1, null, true, true, true);
Pawn pawn2 = new Pawn("Second", board, pos2, null, true, true, true);
board.AddPawn(pawn1);
board.AddPawn(pawn2);
Point expectedPosition = new Point(7, 4);
bool firstMove = pawn2.Offset(Point.Left);
Point firstPosition = pawn2.Position;
bool secondMove = pawn2.Offset(Point.Left);
Point secondPosition = pawn2.Position;
Assert.IsTrue(firstMove, "Pawn was not able to move left one tile");
Assert.IsFalse(secondMove, "Pawn somehow passed through another solid pawn");
Assert.AreEqual(expectedPosition, firstPosition, "Pawn could not move to free tile");
Assert.AreEqual(expectedPosition, secondPosition, "Pawn somehow passed through another solid pawn");
}
protected virtual int Heuristic(Board.Node start, Board.Node end)
{
return Point.TaxicabDistance(start.Point, end.Point);
}
public WalkSkill(Combatant owner)
: base(owner, "Walk", "Move across tiles within a limited range")
{
_board = Owner.Board;
}
public void SolidPawnsMoveIntoEachOther()
{
Board board = new Board(BoardCommon.GRID_12X8);
Point pos1 = new Point(6, 4);
Point pos2 = new Point(7, 4);
Pawn pawn1 = new Pawn("First", board, pos1, null, true, true, true);
Pawn pawn2 = new Pawn("Second", board, pos2, null, true, true, true);
board.AddPawn(pawn1);
board.AddPawn(pawn2);
Assert.IsFalse(pawn1.Offset(Point.Right));
Assert.IsFalse(pawn2.Offset(Point.Left));
Assert.AreEqual(pos1, pawn1.Position);
Assert.AreEqual(pos2, pawn2.Position);
}