Exemplo n.º 1
0
        public static void PerformRegionRelocation(Region region, RelocationTable table, sbyte area = -1)
        {
            // This is fake rom but it works anyways, just more convenient
            ROM rom = new ROM(region.data);
            RegionParseState state = new RegionParseState();

            state.area = area;

            byte curCmdIndex;

            while (rom.offset < region.length)
            {
                curCmdIndex = rom.Read8();
                byte curCmdSize = rom.Read8(1);

                if (curCmdSize == 0)
                {
                    throw new ArgumentException("cmd size is 0, loop detected");
                }

                RelocationParseCmd func = relocationParser[curCmdIndex];
                func(rom, table, state);

                if (curCmdIndex != 0x7)
                {
                    rom.AddOffset(curCmdSize);
                }
            }
        }
Exemplo n.º 2
0
        private static void RegionParse_cmd06(ROM rom, List <Region> regions, RegionParseState state)
        {
            int segment = rom.Read8(4);

            if (segment != 0x0e)
            {
                return;
            }

            int type = rom.Read8(1);

            if (type != 0)
            {
                throw new NotSupportedException("Terminating Branch not supported!");
            }

            int segmentedAddress = rom.Read32(4);
            int address          = rom.GetROMAddress(segmentedAddress);

            List <Region>    regionsBranch = new List <Region>();
            RegionParseState stateBranch   = PerformRegionParseInternal(rom, regionsBranch, address, 0);

            // TODO: Copy/update more if needed
            if (stateBranch.FDAddress != -1)
            {
                state.FDAddress = stateBranch.FDAddress;
            }

            foreach (Region region in regionsBranch)
            {
                state.textureData.AddRegion(region.romStart, region.length);
            }
        }
Exemplo n.º 3
0
        public static void PerformRegionParse(ROM rom, List <Region> regions, int offset)
        {
            rom.PushOffset(offset);
            try
            {
                int cmd = 0;
                do
                {
                    if (rom.Read8() != 0x00)
                    {
                        throw new ArgumentException("invalid instruction");
                    }

                    cmd = rom.Read8(1);
                    if (cmd >= 0x40 && cmd <= 0x44)
                    {
                        parser[cmd - 0x40](rom, regions);
                    }
                    else
                    {
                        RegionParse_common(rom, regions);
                    }
                }while (cmd != 0x42);

                Region region = new DynamicRegion(offset, rom.offset - offset, RegionState.Collision);
                regions.Add(region);
            }
            finally
            {
                rom.PopOffset();
            }
        }
Exemplo n.º 4
0
        private static void RegionParse_cmd15(ROM rom, List <Region> regions)
        {
            int segment = rom.Read8(4);

            if (segment != 0x0e)
            {
                return;
            }

            int segmentedAddress = rom.Read32(4);
            int address          = (int)rom.GetROMAddress(segmentedAddress);

            DisplayList.PerformRegionParse(rom, regions, address, rom.Read8(1));
        }
Exemplo n.º 5
0
        private static void RegionParse_cmd2E(ROM rom, List <Region> regions, RegionParseState state)
        {
            int segmentedAddress = rom.Read32(4);
            int segment          = rom.Read8(4);

            // Only 0x19 or 0x0E commands are supported
            if (segment != 0x19 && segment != 0x0E)
            {
                return;
            }

            try
            {
                List <Region> collisionRegions = new List <Region>();
                Collision.PerformRegionParse(rom, collisionRegions, (int)rom.GetROMAddress(segmentedAddress));
                foreach (Region region in collisionRegions)
                {
                    region.area = state.area;
                }

                regions.AddRange(collisionRegions);
            }
            catch (NotSupportedException e)
            {
                MessageBox.Show(String.Format("Model {0} collision parsing is not supported! Reason : '{1}'", state.area, e.Message), "Level Parser", MessageBoxButtons.OK, MessageBoxIcon.Error);
            }
            catch (Exception e)
            {
                MessageBox.Show(String.Format("Failed to parse model {0} collision! Reason : '{1}'", state.area, e.Message), "Level Parser", MessageBoxButtons.OK, MessageBoxIcon.Error);
            }
        }
Exemplo n.º 6
0
        private static void OptimizeParse_cmd04(ROM rom, DisplayListRegion region, RegionOptimizeState state)
        {
            // initial state
            if (state.last04Cmd == 0)
            {
                state.last04Cmd = rom.Read64();
                return;
            }

            Int64 cmd = rom.Read64();

            // if current 04 loads the same vertices, remove current cmd
            if (cmd == state.last04Cmd)
            {
                rom.Write64(0);
                return;
            }

            // new vertices are being loaded, update the thing
            state.last04Cmd = cmd;

            // if previous cmd is 0x04, it will be overriden by current 04 anyways
            if (rom.Read8(-8) == 0x04)
            {
                rom.Write64(0, -8);
            }
        }
Exemplo n.º 7
0
        public static void PerformRegionRelocation(Region region, RelocationTable table)
        {
            // This is fake rom but it works anyways, just more convenient
            ROM rom = new ROM(region.data);

            byte cmd;

            do
            {
                cmd = rom.Read8();
                int cmdSize = cmdSizeTable[cmd];
                if (cmdSize == 0)
                {
                    throw new ArgumentException("Loop detected");
                }

                RelocationParseCmd func = relocationParser[cmd];
                func(rom, table);

                if (cmdSize != 0xFF)
                {
                    rom.AddOffset(cmdSize);
                }
            }while (rom.offset < region.length);
        }
Exemplo n.º 8
0
        private static void RegionParse_common(ROM rom, List <Region> regions)
        {
            // Triangles of any collision

            int size = rom.Read16(2);

            if (size == 0)
            {
                throw new ArgumentException("common collision loop detected");
            }

            int collType     = rom.Read8(1);
            int triangleSize = 6;

            switch (collType)
            {
            case 0x0E:
            case 0x24:
            case 0x25:
            case 0x27:
            case 0x2C:
            case 0x2D:
                triangleSize = 8;
                break;
            }

            rom.AddOffset(4 + size * triangleSize);
        }
Exemplo n.º 9
0
        private static void TriangleMapParse_cmd04(ROM rom, TriangleMap map, TriangleMapParseState state)
        {
            state.vertexLoadCmd = (UInt64)rom.Read64();
            byte vertexDesc = rom.Read8(1);

            byte  vertexCount            = (byte)(((vertexDesc & 0xF0) >> 4) + 1);
            byte  vertexOffset           = (byte)((vertexDesc & 0x0F));
            Int32 vertexSegmentedAddress = rom.Read32(4);

            state.segmentedVertexBufferAddress = vertexSegmentedAddress;

            Int32 romPtr = rom.GetROMAddress(vertexSegmentedAddress);

            if (romPtr == -1)
            {
                throw new ArgumentException("Invalid segmented address!");
            }

            rom.PushOffset(romPtr);
            for (int vertex = vertexOffset; vertex < vertexCount; vertex++)
            {
                Int64 lo = rom.Read64();
                Int64 hi = rom.Read64(8);

                state.vbuf[vertex]         = new Vertex((UInt64)lo, (UInt64)hi);
                state.vbufRomStart[vertex] = rom.offset;
                state.scrollBuf[vertex]    = FindMatchingScroll(state.scrolls, vertexSegmentedAddress, state.td);

                rom.AddOffset(0x10);
                vertexSegmentedAddress += 0x10;
            }
            rom.PopOffset();
        }
Exemplo n.º 10
0
        private static void TriangleMapParse_cmdBF(ROM rom, TriangleMap map, TriangleMapParseState state)
        {
            state.isHeader = false;
            state.state    = VisualMapParseStateCmd.Footer;

            byte v0index = (byte)(rom.Read8(5) / 0xA);
            byte v1index = (byte)(rom.Read8(6) / 0xA);
            byte v2index = (byte)(rom.Read8(7) / 0xA);

            state.vertexBytes.AddRegion(state.vbufRomStart[v0index], 0x10);
            state.vertexBytes.AddRegion(state.vbufRomStart[v1index], 0x10);
            state.vertexBytes.AddRegion(state.vbufRomStart[v2index], 0x10);

            // This assumes all scrolls are scrolling at the same speed which is usually true :3
            if (state.scrollBuf[v0index] != state.scrollBuf[v1index] ||
                state.scrollBuf[v0index] != state.scrollBuf[v2index] ||
                state.scrollBuf[v1index] != state.scrollBuf[v2index])
            {
                throw new Exception("Vertices are scrolling at different scrolls");
            }

            Scroll scroll = state.scrollBuf[v0index];

            if ((scroll == null && state.td.scroll != null) ||
                (scroll != null && !scroll.Equals(state.td.scroll)))
            {
                ScrollingTextureDescription oldTd = state.td;

                state.td = new ScrollingTextureDescription();
                state.td.AddRange(oldTd);
                state.td.scroll = scroll;
                if (scroll is EditorScroll editorScroll)
                {
                    state.td.RegisterScroll(editorScroll);
                }
                if (scroll is TextureScroll)
                {
                    state.td.omitScrollCheck = true;
                }
            }

            state.td.RegisterVertex(state.segmentedVertexBufferAddress + v0index * 0x10);
            state.td.RegisterVertex(state.segmentedVertexBufferAddress + v1index * 0x10);
            state.td.RegisterVertex(state.segmentedVertexBufferAddress + v2index * 0x10);
            map.AddTriangle(state.td, state.vbuf[v0index], state.vbuf[v1index], state.vbuf[v2index]);
        }
Exemplo n.º 11
0
        public static void PerformVisualMapRebuild(ROM realRom, Region region, int maxDLLength)
        {
            // This is fake rom but it works anyways, just more convenient
            // Want to be safe with overwriting the whole display list
            ROM fakeRom = new ROM(region.data);
            VisualMapParseState state = new VisualMapParseState();

            DisplayListRegion dlRegion = (DisplayListRegion)region;
            VisualMap         map      = new VisualMap();

            byte curCmdIndex;

            do
            {
                curCmdIndex = fakeRom.Read8();
                VisualMapParserCmd func = visualMapParser[curCmdIndex];
                func(fakeRom, map, state);
                fakeRom.AddOffset(8);
            }while (fakeRom.offset < region.length);

            ROM visualMapROM    = new ROM(new byte[maxDLLength]);
            int visualMapLength = map.MakeF3D(visualMapROM);


            // Now write data to real rom + trimming
            // bzero
            fakeRom.offset = 0;
            realRom.PushOffset(region.romStart);
            {
                do
                {
                    realRom.Write64(0x0101010101010101);
                    realRom.AddOffset(8);
                    fakeRom.AddOffset(8);
                } while (fakeRom.offset < region.length);
            }
            realRom.PopOffset();

            visualMapROM.offset = 0;
            realRom.PushOffset(region.romStart);
            {
                int start = region.romStart;
                do
                {
                    Int64 cmd = visualMapROM.Read64();
                    visualMapROM.AddOffset(8);

                    realRom.Write64((ulong)cmd);
                    realRom.AddOffset(8);
                } while (visualMapROM.offset < visualMapLength);

                region.length = realRom.offset - start;
                region.data   = new byte[region.length];
                realRom.ReadData(region.romStart, region.length, region.data);
            }
            realRom.PopOffset();
        }
Exemplo n.º 12
0
        public static void PerformRegionOptimize(ROM realRom, Region region, FixConfig config)
        {
            // This is fake rom but it works anyways, just more convenient
            // Want to be safe with overwriting the whole display list
            ROM fakeRom = new ROM(region.data);
            RegionOptimizeState state = new RegionOptimizeState(config);

            DisplayListRegion dlRegion = (DisplayListRegion)region;

            byte curCmdIndex;

            do
            {
                curCmdIndex = fakeRom.Read8();
                OptimizeParserCmd func = optimizeParser[curCmdIndex];
                func(fakeRom, dlRegion, state);
                fakeRom.AddOffset(8);
            }while (fakeRom.offset < region.length);

            // Now write data to real rom + trimming
            // bzero
            fakeRom.offset = 0;
            realRom.PushOffset(region.romStart);
            {
                do
                {
                    realRom.Write64(0x0101010101010101);
                    realRom.AddOffset(8);
                    fakeRom.AddOffset(8);
                } while (fakeRom.offset < region.length);
            }
            realRom.PopOffset();

            fakeRom.offset = 0;
            realRom.PushOffset(region.romStart);
            {
                int start = region.romStart;
                do
                {
                    Int64 cmd = fakeRom.Read64();
                    fakeRom.AddOffset(8);

                    if (config.trimNOPs && cmd == 0 && dlRegion.isUnusedTrimmingAllowed)
                    {
                        continue;
                    }

                    realRom.Write64((ulong)cmd);
                    realRom.AddOffset(8);
                } while (fakeRom.offset < region.length);

                region.length = realRom.offset - start;
                region.data   = new byte[region.length];
                realRom.ReadData(region.romStart, region.length, region.data);
            }
            realRom.PopOffset();
        }
Exemplo n.º 13
0
        private static void RegionParse_common(ROM rom, List <Region> regions, RegionParseState state)
        {
            int curCmd = rom.Read8();

            if ((state.regionState == RegionState.AreaData || state.regionState == RegionState.AreaScrolls) && curCmd != 0x24 && curCmd != 0x26)
            {
                CutRegion(rom, regions, state, rom.offset, RegionState.AreaFooter);
            }
        }
Exemplo n.º 14
0
        private static void HeaderParse_cmd17(ROM rom)
        {
            int segment      = rom.Read8(3);
            int startAddress = rom.Read32(4);
            int endAddress   = rom.Read32(8);

            SegmentDescriptor descriptor = new SegmentDescriptor(startAddress, endAddress - startAddress);

            rom.SetSegment(segment, descriptor);
        }
Exemplo n.º 15
0
 public EditorScroll(ROM rom) : base(rom)
 {
     segmentedAddress = 0x0e000000;
     acts             = rom.Read8(0x02);
     X       = rom.Read16(0x04);
     Y       = rom.Read16(0x06);
     Z       = rom.Read16(0x08);
     BParam  = rom.Read16(0x10);
     BParam2 = rom.Read16(0x12);
 }
Exemplo n.º 16
0
        public static void Trim(Region region, bool addObjects)
        {
            ROM rom = new ROM(region.data);

            MemoryStream trimmedObject = new MemoryStream();

            while (rom.offset < region.length)
            {
                byte curCmdIndex = rom.Read8();
                byte curCmdSize  = rom.Read8(1);

                if (curCmdIndex == 0x24)
                {
                    byte acts = rom.Read8(2);
                    if (acts == 0)
                    {
                        goto fini;
                    }
                }


                byte[] data = new byte[curCmdSize];
                rom.ReadData(rom.offset, curCmdSize, data);
                trimmedObject.Write(data, 0, curCmdSize);

fini:
                rom.AddOffset(curCmdSize);
            }

            if (addObjects)
            {
                trimmedObject.Write(emptyObject, 0, emptyObject.Count());
                trimmedObject.Write(emptyObject, 0, emptyObject.Count());
                trimmedObject.Write(emptyObject, 0, emptyObject.Count());
                trimmedObject.Write(emptyObject, 0, emptyObject.Count());
                trimmedObject.Write(emptyObject, 0, emptyObject.Count());
            }

            region.data   = trimmedObject.ToArray();
            region.length = (int)trimmedObject.Length;

            trimmedObject.Dispose();
        }
Exemplo n.º 17
0
        public static void PerformHeaderParse(ROM rom, int offset)
        {
            rom.PushOffset(offset);

            RegionParseState state = new RegionParseState();

            state.start = rom.offset;

            byte curCmdIndex;
            int  stepCounter = 0;

            do
            {
                curCmdIndex = rom.Read8();
                byte curCmdSize = rom.Read8(1);

                if (curCmdSize == 0)
                {
                    throw new ArgumentException("cmd size is 0, loop detected");
                }

                if (curCmdIndex == 0x00)
                {
                    HeaderParse_cmd00(rom);
                }

                if (curCmdIndex == 0x17)
                {
                    HeaderParse_cmd17(rom);
                }

                rom.AddOffset(curCmdSize);
                stepCounter++;

                if (stepCounter > 100)
                {
                    throw new ArgumentException("Bank 0x19 && 0x0E loader was not detected");
                }
            }while (rom.GetSegmentDescriptor(0x0E) == null || rom.GetSegmentDescriptor(0x19) == null);

            rom.PopOffset();
        }
Exemplo n.º 18
0
        public static void FixLoadAddresses(ROM initROM, Region region)
        {
            // This is fake rom but it works anyways, just more convenient
            ROM rom = new ROM(region.data);

            RegionParseState state = new RegionParseState();

            state.start = rom.offset;

            byte curCmdIndex;
            int  stepCounter = 0;

            do
            {
                curCmdIndex = rom.Read8();
                byte curCmdSize = rom.Read8(1);

                if (curCmdSize == 0)
                {
                    throw new ArgumentException("cmd size is 0, loop detected");
                }

                if (curCmdIndex == 0x17)
                {
                    bool isFixed;
                    HeaderFix_cmd17(rom, initROM, out isFixed);
                    if (isFixed)
                    {
                        break;
                    }
                }

                rom.AddOffset(curCmdSize);
                stepCounter++;

                if (stepCounter > 100)
                {
                    throw new ArgumentException("Bank 0x19 && 0x0E loader was not detected");
                }
            }while (rom.GetSegmentDescriptor(0x0E) == null || rom.GetSegmentDescriptor(0x19) == null);
        }
Exemplo n.º 19
0
        private static void RegionParse_cmd22(ROM rom, List <Region> regions, RegionParseState state)
        {
            if (state.regionState != RegionState.ModelsLoader)
            {
                CutRegion(rom, regions, state, rom.offset, RegionState.ModelsLoader);
            }

            int segmentedAddress = rom.Read32(4);
            int segment          = rom.Read8(4);
            int model            = rom.Read8(3);

            // Only 0x19 or 0x0E commands are supported
            if (segment != 0x19 && segment != 0x0E)
            {
                return;
            }

            try
            {
                List <Region> modelRegions = new List <Region>();

                int geoLayoutROMAddress = rom.GetROMAddress(segmentedAddress);
                GeoLayout.PerformRegionParse(rom, modelRegions, geoLayoutROMAddress);

                foreach (Region region in modelRegions)
                {
                    region.model = model;
                }

                regions.AddRange(modelRegions);
            }
            catch (NotSupportedException e)
            {
                MessageBox.Show(String.Format("Model {0} graphics parsing is not supported! Reason : '{1}'", state.area, e.Message), "Level Parser", MessageBoxButtons.OK, MessageBoxIcon.Error);
            }
            catch (Exception e)
            {
                MessageBox.Show(String.Format("Failed to parse model {0} graphics! Reason : '{1}'", state.area, e.Message), "Level Parser", MessageBoxButtons.OK, MessageBoxIcon.Error);
            }
        }
Exemplo n.º 20
0
        private static void RegionParse_cmd1F(ROM rom, List <Region> regions, RegionParseState state)
        {
            CutRegion(rom, regions, state, rom.offset, RegionState.AreaHeader);

            int   segmentedAddress = rom.Read32(4);
            int   segment          = rom.Read8(4);
            sbyte area             = (sbyte)rom.Read8(2);

            state.area        = area;
            state.regionState = RegionState.AreaHeader;

            // Only 0x19 or 0x0E commands are supported
            // Usually it is in segment 19 anyways
            if (segment != 0x19 && segment != 0x0E)
            {
                return;
            }

            int           geoLayoutROMAddress  = rom.GetROMAddress(segmentedAddress);
            List <Region> areaGeolayoutRegions = new List <Region>();

            try
            {
                GeoLayout.PerformRegionParse(rom, areaGeolayoutRegions, geoLayoutROMAddress);
                foreach (Region region in areaGeolayoutRegions)
                {
                    region.area = area;
                }

                regions.AddRange(areaGeolayoutRegions);
            }
            catch (NotSupportedException e)
            {
                MessageBox.Show(String.Format("Area {0} graphics parsing is not supported! Reason : '{1}'", state.area, e.Message), "Level Parser", MessageBoxButtons.OK, MessageBoxIcon.Error);
            }
            catch (Exception e)
            {
                MessageBox.Show(String.Format("Failed to parse area {0} graphics! Reason : '{1}'", state.area, e.Message), "Level Parser", MessageBoxButtons.OK, MessageBoxIcon.Error);
            }
        }
Exemplo n.º 21
0
        public static void PerformRegionParse(ROM rom, List <Region> regions, int offset, bool isOldScrollBehaviour)
        {
            rom.PushOffset(offset);

            RegionParseState state = new RegionParseState
            {
                start = rom.offset,
                isOldBehaviourChecked = isOldScrollBehaviour
            };

            byte curCmdIndex;

            do
            {
                curCmdIndex = rom.Read8();
                byte curCmdSize = rom.Read8(1);

                if (curCmdSize == 0)
                {
                    throw new ArgumentException("cmd size is 0, loop detected");
                }

                RegionParseCmd func = regionParser[curCmdIndex];
                if (func != RegionParse_common)
                {
                    RegionParse_common(rom, regions, state);
                }

                func(rom, regions, state);

                if (curCmdIndex != 0x7)
                {
                    rom.AddOffset(curCmdSize);
                }
            }while (curCmdIndex != terminateCmd);

            rom.PopOffset();
        }
Exemplo n.º 22
0
 private static void RegionParse_cmd10(ROM rom, List <Region> regions, RegionParseState state)
 {
     if (rom.Read64() == 0x1008000000000000)
     {
         if (rom.offset == state.start)
         {
             state.start = rom.offset + rom.Read8(1);
         }
         // Skip empty commands in the beginning of any region
         else if (rom.offset == state.start + rom.Read8(1))
         {
             state.start = rom.offset + rom.Read8(1);
         }
         else
         {
             // Commands is not in the beginning, cut area, start new one that is same as it was before
             if (state.regionState == RegionState.ModelsLoader)
             {
                 CutRegion(rom, regions, state, rom.offset, state.regionState);
             }
         }
     }
 }
Exemplo n.º 23
0
        private static void RegionParse_cmd03(ROM rom, List <Region> regions, RegionParseState state)
        {
            int segment = rom.Read8(4);

            if (segment != 0x0e)
            {
                return;
            }

            int segmentedAddress = rom.Read32(4);
            int address          = rom.GetROMAddress(segmentedAddress);

            state.lightData.AddRegion(address, 0x8);
        }
Exemplo n.º 24
0
        public static void PerformRegionParse(ROM rom, List <Region> regions, int offset, out Dictionary <int, List <ScrollObject> > scrolls)
        {
            rom.PushOffset(offset);

            RegionParseState state = new RegionParseState();

            state.start = rom.offset;

            byte curCmdIndex;

            do
            {
                curCmdIndex = rom.Read8();
                byte curCmdSize = rom.Read8(1);

                if (curCmdSize == 0)
                {
                    throw new ArgumentException("cmd size is 0, loop detected");
                }

                RegionParseCmd func = regionParser[curCmdIndex];
                if (func != RegionParse_common)
                {
                    RegionParse_common(rom, regions, state);
                }

                func(rom, regions, state);

                if (curCmdIndex != 0x7)
                {
                    rom.AddOffset(curCmdSize);
                }
            }while (curCmdIndex != terminateCmd);

            rom.PopOffset();
            scrolls = state.scrolls;
        }
Exemplo n.º 25
0
        private static void RegionParse_cmd04(ROM rom, List <Region> regions, RegionParseState state)
        {
            int segment = rom.Read8(4);

            if (segment != 0x0e)
            {
                return;
            }

            int segmentedAddress = rom.Read32(4);
            int address          = rom.GetROMAddress(segmentedAddress);

            state.vertexData.AddRegion(address, rom.Read16(2));
            //regions.Add(new Region(address, rom.Read16(2), RegionState.VertexInfo));
        }
Exemplo n.º 26
0
        private static void VisualMapParse_cmdFB(ROM rom, VisualMap map, VisualMapParseState state)
        {
            // Some importers have the only EnvColor func for everything lmfao
            if (rom.Read8(8) != 0xFD)
            {
                goto fini;
            }

            state.envColorCmd = (ulong)rom.Read64();
            state.state       = VisualMapParseStateCmd.Texture;
            state.td          = new TextureDescription();

fini:
            VisualMapParse_common(rom, map, state);
        }
Exemplo n.º 27
0
        public static void PerformRegionRelocation(Region region, RelocationTable table)
        {
            // This is fake rom but it works anyways, just more convenient
            ROM rom = new ROM(region.data);

            byte curCmdIndex;

            do
            {
                curCmdIndex = rom.Read8();
                RelocationParseCmd func = relocationParser[curCmdIndex];
                func(rom, table, (DisplayListRegion)region);
                rom.AddOffset(8);
            }while (rom.offset < region.length);
        }
Exemplo n.º 28
0
        private static void RegionParse_cmd17(ROM rom, List <Region> regions, RegionParseState state)
        {
            int segment      = rom.Read8(3);
            int startAddress = rom.Read32(4);
            int endAddress   = rom.Read32(8);

            if ((uint)startAddress > 0x4000000)
            {
                return;
            }

            SegmentDescriptor descriptor = new SegmentDescriptor(startAddress, endAddress - startAddress);

            rom.SetSegment(segment, descriptor);
        }
Exemplo n.º 29
0
        private static void RegionParse_cmdFD(ROM rom, List <Region> regions, RegionParseState state)
        {
            state.FDAddress = -1;

            int segment = rom.Read8(4);

            if (segment != 0x0e)
            {
                return;
            }

            int segmentedAddress = rom.Read32(4);
            int address          = (int)rom.GetROMAddress(segmentedAddress);

            state.FDAddress = address;
        }
Exemplo n.º 30
0
        private static void HeaderFix_cmd17(ROM rom, ROM initROM, out bool isFixed)
        {
            int segment      = rom.Read8(3);
            int startAddress = initROM.GetSegmentDescriptor(0x0E).start;
            int endAddress   = startAddress + initROM.GetSegmentDescriptor(0x0E).length;

            if (segment != 0x0E)
            {
                isFixed = false;
                return;
            }

            rom.Write32(startAddress, 4);
            rom.Write32(endAddress, 8);
            isFixed = true;
        }