public static float[] GetWaveFromFile(AnalogChannel channel, uint waveLength, double samplePeriod, double timeOffset)
{
if(readChannel == null || readTime == null)
{
String filename = Path.GetTempFileName();
FileStream f = new FileStream(filename, FileMode.Create, FileAccess.Write);
byte[] i2cSequence = Resources.Load ("i2c_sequence.mat");
f.Write(i2cSequence, 0, i2cSequence.Length);
f.Close();
MatfileReader matfileReader = new MatlabFileIO.MatfileReader(filename);
readChannel = new Dictionary<AnalogChannel, float[]>() {
{ AnalogChannel.ChA, Utils.CastArray<double, float>(matfileReader.Variables["chA"].data as double[]) },
{ AnalogChannel.ChB, Utils.CastArray<double, float>(matfileReader.Variables["chB"].data as double[]) },
};
readTime = matfileReader.Variables["time"].data as double[];
samplePeriodOriginal = readTime[1] - readTime[0];
sequenceLength = readChannel[AnalogChannel.ChA].Length;
matfileReader.Close();
}
if (samplePeriod / samplePeriodOriginal % 1.0 != 0.0)
throw new Exception("Data from file doesn't suit the dummy scope sampling frequency");
uint decimation = (uint)Math.Ceiling(samplePeriod / samplePeriodOriginal);
float[] wave = Utils.DecimateArray(readChannel[channel], decimation);
int sampleOffset = (int)Math.Ceiling(timeOffset / samplePeriodOriginal % sequenceLength);
int requiredRepetitions = (int)Math.Ceiling(waveLength / (double)wave.Length);
if (requiredRepetitions > 1)
{
List<float> concat = new List<float>();
for(int i = 0; i < requiredRepetitions; i++)
concat.AddRange(wave);
wave = concat.Take((int)waveLength).ToArray();
}
return wave;
}
float baseVoltageRangeMax = 0.6769f; //V
/// <summary>
/// Sets and uploads the divider and multiplier what are optimal for the requested range
/// </summary>
/// <param name="channel"></param>
/// <param name="minimum"></param>
/// <param name="maximum"></param>
public void SetVerticalRange(AnalogChannel channel, float minimum, float maximum)
{
if (!Connected) return;
//Walk through dividers/multipliers till requested range fits
//this walk assumes it starts with the smallest range, and that range is only increasing
int dividerIndex = 0;
int multIndex = 0;
verticalRanges[channel] = new Range(minimum, maximum);
for (int i = 0; i < rom.computedDividers.Length * rom.computedMultipliers.Length; i++)
{
dividerIndex= i / rom.computedMultipliers.Length;
multIndex = rom.computedMultipliers.Length - (i % rom.computedMultipliers.Length) - 1;
if (
(ProbeScaleHostToScope(channel, maximum) < baseVoltageRangeMax * rom.computedDividers[dividerIndex] / rom.computedMultipliers[multIndex])
&&
(ProbeScaleHostToScope(channel, minimum) > baseVoltageRangeMin * rom.computedDividers[dividerIndex] / rom.computedMultipliers[multIndex])
)
break;
}
SetDivider(channel, validDividers[dividerIndex]);
SetMultiplier(channel, validMultipliers[multIndex]);
channelSettings[channel] = rom.getCalibration(channel, validDividers[dividerIndex], validMultipliers[multIndex]);
SetYOffset(channel, yOffset[channel]);
yOffset[channel] = GetYOffset(channel);
if (channel == triggerAnalog.channel)
{
TriggerAnalog = this.triggerAnalog;
//SetTriggerThreshold(this.triggerThreshold);
}
}
public float GetYOffset(AnalogChannel channel)
{
REG r = (channel == AnalogChannel.ChA) ? REG.CHA_YOFFSET_VOLTAGE : REG.CHB_YOFFSET_VOLTAGE;
byte offsetByte = FpgaSettingsMemory[r].GetByte();
return ConvertYOffsetByteToVoltage(channel, offsetByte);
}
/// <summary>
/// Sets vertical offset of a channel
/// </summary>
/// <param name="channel">0 or 1 (channel A or B)</param>
/// <param name="offset">Vertical offset in Volt</param>
public void SetYOffset(AnalogChannel channel, float offset)
{
yOffset[channel] = offset;
if (!Connected) return;
//FIXME: convert offset to byte value
REG r = (channel == AnalogChannel.ChA) ? REG.CHA_YOFFSET_VOLTAGE : REG.CHB_YOFFSET_VOLTAGE;
//Logger.Debug("Set Y-offset for channel " + channel + " to " + offset + "V");
//Offset: 0V --> 150 - swing +-0.9V
//Let ADC output of 127 be the zero point of the Yoffset
double[] c = channelSettings[channel].coefficients;
int offsetInt = (int)(-(ProbeScaleHostToScope(channel, offset) + c[2] + c[0] * 127) / c[1]);
FpgaSettingsMemory[r].Set((byte)Math.Max(yOffsetMin, Math.Min(yOffsetMax, -(ProbeScaleHostToScope(channel, offset) + c[2] + c[0] * 127) / c[1])));
//Logger.Debug(String.Format("Yoffset Ch {0} set to {1} V = byteval {2}", channel, GetYOffset(channel), FpgaSettingsMemory[r].GetByte()));
}
public static SmartScope.GainCalibration ComputeCalibration(AnalogChannel channel, double div, double mul, double[] inputVoltage, double[] adcValue, double[] yOffset)
{
int rows = adcValue.Length;
int cols = 3;
double[] matrixData = adcValue.Concat(
yOffset.Concat(
Enumerable.Repeat(1.0, rows)
)).ToArray();
var A = new DenseMatrix(rows, cols, matrixData);
var B = new DenseMatrix(rows, 1, inputVoltage);
var C = A.QR().Solve(B);
return new SmartScope.GainCalibration()
{
channel = channel,
divider = div,
multiplier = mul,
coefficients = C.ToColumnWiseArray()
};
}
public static Dictionary<AnalogChannel, AnalogWaveProperties> MeasureAutoArrangeSettings(IScope scope, AnalogChannel aciveChannel, Action<float> progressReport)
{
float progress = 0f;
progressReport(progress);
//stop scope streaming
scope.DataSourceScope.Stop();
//Prepare scope for test
if (scope is SmartScope)
(scope as SmartScope).SetDisableVoltageConversion(false);
//set to timerange wide enough to capture 50Hz, but slightly off so smallest chance of aliasing
const float initialTimeRange = 0.0277f;
scope.AcquisitionMode = AcquisitionMode.AUTO;
scope.AcquisitionLength = initialTimeRange;
scope.SetViewPort(0, scope.AcquisitionLength);
//s.AcquisitionDepth = 4096;
scope.TriggerHoldOff = 0;
scope.SendOverviewBuffer = false;
AnalogTriggerValue atv = new AnalogTriggerValue();
atv.channel = AnalogChannel.ChA;
atv.direction = TriggerDirection.RISING;
atv.level = 5000;
scope.TriggerAnalog = atv;
foreach (AnalogChannel ch in AnalogChannel.List)
scope.SetCoupling(ch, Coupling.DC);
scope.CommitSettings();
progress += .1f;
progressReport(progress);
////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////
// VERTICAL == VOLTAGE
//set to largest input range
float maxRange = 1.2f / 1f * 36f;
foreach (AnalogChannel ch in AnalogChannel.List)
scope.SetVerticalRange(ch, -maxRange / 2f, maxRange / 2f);
float[] minValues = new float[] { float.MaxValue, float.MaxValue };
float[] maxValues = new float[] { float.MinValue, float.MinValue };
//measure min and max voltage over 3 full ranges
for (int i = -1; i < 2; i++)
{
progress += .1f;
progressReport(progress);
foreach (AnalogChannel ch in AnalogChannel.List)
scope.SetYOffset(ch, (float)i * maxRange);
scope.CommitSettings();
System.Threading.Thread.Sleep(100);
scope.ForceTrigger();
//fetch data
DataPackageScope p = FetchLastFrame(scope);
p = FetchLastFrame(scope); //needs this second fetch as well to get voltage conversion on ChanB right?!?
if (p == null)
{
Logger.Error("Didn't receive data from scope, aborting");
return null;
}
//check if min or max need to be updated (only in case this measurement was not saturated)
float[] dataA = (float[])p.GetData(DataSourceType.Viewport, AnalogChannel.ChA).array;
float[] dataB = (float[])p.GetData(DataSourceType.Viewport, AnalogChannel.ChB).array;
float minA = dataA.Min();
float maxA = dataA.Max();
float minB = dataB.Min();
float maxB = dataB.Max();
if (minA != p.SaturationLowValue[AnalogChannel.ChA] && minA != p.SaturationHighValue[AnalogChannel.ChA] && minValues[0] > minA) minValues[0] = minA;
if (minB != p.SaturationLowValue[AnalogChannel.ChB] && minB != p.SaturationHighValue[AnalogChannel.ChB] && minValues[1] > minB) minValues[1] = minB;
if (maxA != p.SaturationLowValue[AnalogChannel.ChA] && maxA != p.SaturationHighValue[AnalogChannel.ChA] && maxValues[0] < maxA) maxValues[0] = maxA;
if (maxB != p.SaturationLowValue[AnalogChannel.ChB] && maxB != p.SaturationHighValue[AnalogChannel.ChB] && maxValues[1] < maxB) maxValues[1] = maxB;
}
//calc ideal voltage range and offset
float sizer = 3; //meaning 3 waves would fill entire view
float[] coarseAmplitudes = new float[2];
coarseAmplitudes[0] = maxValues[0] - minValues[0];
coarseAmplitudes[1] = maxValues[1] - minValues[1];
float[] desiredOffsets = new float[2];
desiredOffsets[0] = (maxValues[0] + minValues[0]) / 2f;
desiredOffsets[1] = (maxValues[1] + minValues[1]) / 2f;
float[] desiredRanges = new float[2];
desiredRanges[0] = coarseAmplitudes[0] * sizer;
desiredRanges[1] = coarseAmplitudes[1] * sizer;
//intervene in case the offset is out of range for this range
if (desiredRanges[0] < Math.Abs(desiredOffsets[0]))
desiredRanges[0] = Math.Abs(desiredOffsets[0]);
if (desiredRanges[1] < Math.Abs(desiredOffsets[1]))
desiredRanges[1] = Math.Abs(desiredOffsets[1]);
//set fine voltage range and offset
scope.SetVerticalRange(AnalogChannel.ChA, -desiredRanges[0] / 2f, desiredRanges[0] / 2f);
scope.SetYOffset(AnalogChannel.ChA, -desiredOffsets[0]);
scope.SetVerticalRange(AnalogChannel.ChB, -desiredRanges[1] / 2f, desiredRanges[1] / 2f);
scope.SetYOffset(AnalogChannel.ChB, -desiredOffsets[1]);
scope.CommitSettings();
//now get data in order to find accurate lowHigh levels (as in coarse mode this was not accurate)
DataPackageScope pFine = FetchLastFrame(scope);
pFine = FetchLastFrame(scope); //needs this second fetch as well to get voltage conversion on ChanB right?!?
Dictionary<AnalogChannel, float[]> dataFine = new Dictionary<AnalogChannel, float[]>();
dataFine.Add(AnalogChannel.ChA, (float[])pFine.GetData(DataSourceType.Viewport, AnalogChannel.ChA).array);
dataFine.Add(AnalogChannel.ChB, (float[])pFine.GetData(DataSourceType.Viewport, AnalogChannel.ChB).array);
Dictionary<AnalogChannel, float> minimumValues = new Dictionary<AnalogChannel, float>();
Dictionary<AnalogChannel, float> maximumValues = new Dictionary<AnalogChannel, float>();
Dictionary<AnalogChannel, float> amplitudes = new Dictionary<AnalogChannel, float>();
Dictionary<AnalogChannel, float> offsets = new Dictionary<AnalogChannel, float>();
Dictionary<AnalogChannel, bool> isFlatline = new Dictionary<AnalogChannel, bool>();
foreach (var kvp in dataFine)
{
minimumValues.Add(kvp.Key, kvp.Value.Min());
maximumValues.Add(kvp.Key, kvp.Value.Max());
amplitudes.Add(kvp.Key, kvp.Value.Max() - kvp.Value.Min());
offsets.Add(kvp.Key, (kvp.Value.Max() + kvp.Value.Min())/2f);
isFlatline.Add(kvp.Key, amplitudes[kvp.Key] < 0.01f);
}
////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////
// HORIZONTAL == FREQUENCY
const float minTimeRange = 500f * 0.00000001f;//500 samples over full hor span
const float maxTimeRange = 1f;
double frequency, frequencyError, dutyCycle, dutyCycleError;
Dictionary<AnalogChannel, double> finalFrequencies = new Dictionary<AnalogChannel, double>();
finalFrequencies.Add(AnalogChannel.ChA, double.MaxValue);
finalFrequencies.Add(AnalogChannel.ChB, double.MaxValue);
int iterationCounter = 0; //only for performance testing
float currTimeRange = minTimeRange;
bool continueLooping = true;
if (isFlatline.Where(x => x.Value).ToList().Count == isFlatline.Count) //no need to find frequency in case of 2 DC signals
continueLooping = false;
while (continueLooping)
{
progress += .04f;
progressReport(progress);
iterationCounter++; //only for performance testing
scope.AcquisitionLength = currTimeRange;
scope.SetViewPort(0, scope.AcquisitionLength);
scope.CommitSettings();
DataPackageScope pHor = FetchLastFrame(scope);
pHor = FetchLastFrame(scope);
Dictionary<AnalogChannel, float[]> timeData = new Dictionary<AnalogChannel, float[]>();
timeData.Add(AnalogChannel.ChA, (float[])pHor.GetData(DataSourceType.Viewport, AnalogChannel.ChA).array);
timeData.Add(AnalogChannel.ChB, (float[])pHor.GetData(DataSourceType.Viewport, AnalogChannel.ChB).array);
foreach (var kvp in timeData)
{
//make sure entire amplitude is in view
float currMinVal = kvp.Value.Min();
float currMaxVal = kvp.Value.Max();
float lowMarginValue = minimumValues[kvp.Key] + amplitudes[kvp.Key] * 0.1f;
float highMarginValue = maximumValues[kvp.Key] - amplitudes[kvp.Key] * 0.1f;
if (currMinVal > lowMarginValue) break;
if (currMaxVal < highMarginValue) break;
ComputeFrequencyDutyCycle(pHor.GetData(DataSourceType.Viewport, kvp.Key), out frequency, out frequencyError, out dutyCycle, out dutyCycleError);
if (!double.IsNaN(frequency) && (finalFrequencies[kvp.Key] == double.MaxValue))
finalFrequencies[kvp.Key] = frequency;
}
//update and check whether we've found what we were looking for
currTimeRange *= 100f;
bool freqFoundForAllActiveWaves = true;
foreach (var kvp in timeData)
if (!isFlatline[kvp.Key] && finalFrequencies[kvp.Key] == double.MaxValue)
freqFoundForAllActiveWaves = false;
continueLooping = !freqFoundForAllActiveWaves;
if (currTimeRange > maxTimeRange)
continueLooping = false;
}
//in case of flatline or very low freq, initial value will not have changed
foreach (AnalogChannel ch in finalFrequencies.Keys.ToList())
if (finalFrequencies[ch] == double.MaxValue)
finalFrequencies[ch] = 0;
Dictionary<AnalogChannel, AnalogWaveProperties> waveProperties = new Dictionary<AnalogChannel, AnalogWaveProperties>();
foreach (var kvp in isFlatline)
waveProperties.Add(kvp.Key, new AnalogWaveProperties(minimumValues[kvp.Key], maximumValues[kvp.Key], amplitudes[kvp.Key], offsets[kvp.Key], isFlatline[kvp.Key], finalFrequencies[kvp.Key]));
return waveProperties;
}
private float ProbeScaleHostToScope(AnalogChannel ch, float volt)
{
return volt / probeSettings[ch];
}
public void SetYOffsetByte(AnalogChannel channel, byte offset)
{
REG r = channel == AnalogChannel.ChA ? REG.CHA_YOFFSET_VOLTAGE : REG.CHB_YOFFSET_VOLTAGE;
Logger.Debug("Set Y offset for channel " + channel + " to " + offset + " (int value)");
FpgaSettingsMemory[r].Set(offset);
}
public Coupling GetCoupling(AnalogChannel channel)
{
STR dc = channel == AnalogChannel.ChA ? STR.CHA_DCCOUPLING : STR.CHB_DCCOUPLING;
return(StrobeMemory[dc].GetBool() ? Coupling.DC : Coupling.AC);
}
public ProbeDivision GetProbeDivision(AnalogChannel ch)
{
return(probeSettings[ch]);
}
public void SetProbeDivision(AnalogChannel ch, ProbeDivision division)
{
probeSettings[ch] = division;
SetVerticalRange(ch, verticalRanges[ch].minimum, verticalRanges[ch].maximum);
}
public float GetYOffsetMin(AnalogChannel channel)
{
return(ConvertYOffsetByteToVoltage(channel, yOffsetMin));
}
private float ProbeScaleScopeToHost(AnalogChannel ch, float volt)
{
return(volt * probeSettings[ch]);
}
private float ProbeScaleHostToScope(AnalogChannel ch, float volt)
{
return(volt / probeSettings[ch]);
}
public void SetProbeDivision(AnalogChannel ch, ProbeDivision division)
{
probeSettings[ch] = division;
SetVerticalRange(ch, verticalRanges[ch].minimum, verticalRanges[ch].maximum);
}
void SetDivider(AnalogChannel channel, double divider)
{
validateDivider(divider);
byte div = (byte)(Array.IndexOf(validDividers, divider));
int bitOffset = channel.Value * 4;
byte mask = (byte)(0x3 << bitOffset);
byte divMul = FpgaSettingsMemory[REG.DIVIDER_MULTIPLIER].GetByte();
divMul = (byte)((divMul & ~mask) + (div << bitOffset));
FpgaSettingsMemory[REG.DIVIDER_MULTIPLIER].Set(divMul);
}
/// <summary>
/// Get a package of scope data
/// </summary>
/// <returns>Null in case communication failed, a data package otherwise. Might result in disconnecting the device if a sync error occurs</returns>
public DataPackageScope GetScopeData()
{
if (hardwareInterface == null)
{
return(null);
}
byte[] buffer;
SmartScopeHeader header;
try {
buffer = hardwareInterface.GetData(BYTES_PER_BURST);
} catch (ScopeIOException) {
return(null);
} catch (Exception e) {
Logger.Error("Error while trying to get scope data: " + e.Message);
return(null);
}
if (buffer == null)
{
return(null);
}
try {
header = new SmartScopeHeader(buffer);
} catch (Exception e) {
#if WINDOWS
Logger.Warn("Error parsing header - attempting to fix that");
header = ResyncHeader();
if (header == null)
{
Logger.Error("Resync header failed - resetting");
Reset();
return(null);
}
#else
Logger.Error("Failed to parse header - resetting scope: " + e.Message);
Reset();
return(null);
#endif
}
bool newAcquisition = currentDataPackage == null || currentDataPackage.Identifier != header.AcquisitionId;
AcquisitionDepthLastPackage = header.AcquisitionDepth;
SamplePeriodLastPackage = header.SamplePeriod;
acquiring = header.Acquiring;
stopPending = header.LastAcquisition;
awaitingTrigger = header.AwaitingTrigger;
armed = header.Armed;
List <AnalogChannel> analogChannels = new List <AnalogChannel>()
{
AnalogChannel.ChA, AnalogChannel.ChB
};
Dictionary <AnalogChannel, GainCalibration> channelConfig = header.ChannelSettings(this.rom);
Dictionary <Channel, Array> receivedData;
//find min and max voltages for each channel, to allow saturation detection
byte[] minMaxBytes = new byte[] { 0, 255 };
Dictionary <Channel, float[]> minMaxVoltages = new Dictionary <Channel, float[]>();
foreach (AnalogChannel ch in analogChannels)
{
minMaxVoltages.Add(ch, minMaxBytes.ConvertByteToVoltage(header.ChannelSettings(this.rom)[ch], header.GetRegister(ch.YOffsetRegister()), probeSettings[ch]));
}
if (header.OverviewBuffer)
{
buffer = hardwareInterface.GetData(OVERVIEW_BUFFER_SIZE * BYTES_PER_SAMPLE);
if (newAcquisition)
{
//This should not be possible since the overview is always sent *AFTER* the viewport data,
//so the last received package's identifier should match with this one
Logger.Warn("Got an overview buffer but no data came in for it before. This is wrong");
return(null);
}
if (buffer == null)
{
//This is also pretty bad
Logger.Warn("Failed to get overview buffer payload. This is bad");
return(null);
}
receivedData = SplitAndConvert(buffer, analogChannels, header);
foreach (Channel ch in receivedData.Keys)
{
currentDataPackage.SetData(ChannelDataSourceScope.Overview, ch, receivedData[ch]);
if (ch is AnalogChannel)
{
currentDataPackage.SaturationLowValue[ch] = minMaxVoltages[ch][0];
currentDataPackage.SaturationHighValue[ch] = minMaxVoltages[ch][1];
}
}
return(currentDataPackage);
}
if (header.FullAcquisitionDump)
{
buffer = hardwareInterface.GetData(header.Samples * BYTES_PER_SAMPLE);
if (newAcquisition || buffer == null)
{
Logger.Warn("Got an acquisition buffer but no data came in for it before. This is wrong");
return(null);
}
receivedData = SplitAndConvert(buffer, analogChannels, header);
foreach (Channel ch in receivedData.Keys)
{
//Here we don't use AddData since we want to assign the whole acqbuf in memory
// at once instead of growing it as it comes in.
// Need to update datapackage timestamp though!
ChannelData target = currentDataPackage.GetData(ChannelDataSourceScope.Acquisition, ch);
Array targetArray;
if (target == null)
{
targetArray = Array.CreateInstance(receivedData[ch].GetType().GetElementType(), header.AcquisitionDepth);
currentDataPackage.SetData(ChannelDataSourceScope.Acquisition, ch, targetArray);
if (ch is AnalogChannel)
{
currentDataPackage.SaturationLowValue[ch] = minMaxVoltages[ch][0];
currentDataPackage.SaturationHighValue[ch] = minMaxVoltages[ch][1];
}
}
else
{
targetArray = target.array;
}
Array.ConstrainedCopy(receivedData[ch], 0, targetArray, header.PackageOffset * header.Samples, receivedData[ch].Length);
}
float fullAcquisitionDumpProgress = (header.PackageOffset + 1) * (float)header.Samples / header.AcquisitionDepth;
//update FullAcquisitionFetchProgress and fire event when finished
float previousAcqTransferProgress = currentDataPackage.FullAcquisitionFetchProgress;
currentDataPackage.FullAcquisitionFetchProgress = fullAcquisitionDumpProgress;
if (currentDataPackage.FullAcquisitionFetchProgress == 1 && previousAcqTransferProgress < 1)
{
currentDataPackage.UpdateTimestamp();
if (OnAcquisitionTransferFinished != null)
{
OnAcquisitionTransferFinished(this, new EventArgs());
}
}
return(currentDataPackage);
}
if (header.ImpossibleDump)
{
return(null);
}
if (header.NumberOfPayloadBursts == 0 || header.TimedOut)
{
return(null);
}
try {
buffer = hardwareInterface.GetData(BYTES_PER_BURST * header.NumberOfPayloadBursts);
} catch (Exception e) {
Logger.Error("Failed to fetch payload - resetting scope: " + e.Message);
Reset();
return(null);
}
if (buffer == null)
{
Logger.Error("Failed to get payload - resetting");
Reset();
return(null);
}
receivedData = SplitAndConvert(buffer, analogChannels, header);
if (newAcquisition)
{
if (header.PackageOffset != 0)
{
Logger.Warn("Got an off-set package but didn't get any date before");
return(null);
}
/* FIXME: integrate into header*/
AnalogChannel triggerChannel = header.TriggerValue.channel;
byte[] triggerLevel = new byte[] { header.GetRegister(REG.TRIGGER_LEVEL) };
float[] triggerLevelFloat = triggerLevel.ConvertByteToVoltage(header.ChannelSettings(this.rom)[triggerChannel], header.GetRegister(triggerChannel.YOffsetRegister()), probeSettings[triggerChannel]);
header.TriggerValue.level = triggerLevelFloat[0];
currentDataPackage = new DataPackageScope(this.GetType(),
header.AcquisitionDepth, header.SamplePeriod,
header.ViewportLength, header.ViewportOffsetSamples,
header.TriggerHoldoff, header.TriggerHoldoffSamples, header.Rolling,
header.AcquisitionId, header.TriggerValue, header.ViewportExcess);
}
#if DEBUG
currentDataPackage.header = header;
currentDataPackage.Settings["AcquisitionId"] = header.AcquisitionId;
#endif
currentDataPackage.Settings["InputDecimation"] = header.GetRegister(REG.INPUT_DECIMATION);
currentDataPackage.offset[ChannelDataSourceScope.Viewport] = header.ViewportOffset;
currentDataPackage.samplePeriod[ChannelDataSourceScope.Viewport] = header.ViewportSamplePeriod;
foreach (Channel ch in receivedData.Keys)
{
currentDataPackage.AddData(ChannelDataSourceScope.Viewport, ch, receivedData[ch]);
if (ch is AnalogChannel)
{
currentDataPackage.SaturationLowValue[ch] = minMaxVoltages[ch][0];
currentDataPackage.SaturationHighValue[ch] = minMaxVoltages[ch][1];
}
}
foreach (AnalogChannel ch in AnalogChannel.List)
{
currentDataPackage.Resolution[ch] = ProbeScaleScopeToHost(ch, (float)channelConfig[ch].coefficients[0]);
currentDataPackage.Settings["Multiplier" + ch.Name] = channelConfig[ch].multiplier;
#if DEBUG
currentDataPackage.Settings["Divider" + ch.Name] = channelConfig[ch].divider;
currentDataPackage.Settings["Offset" + ch.Name] = ConvertYOffsetByteToVoltage(ch, header.GetRegister(ch.YOffsetRegister()));
#endif
}
return(currentDataPackage);
}
public Coupling GetCoupling(AnalogChannel channel)
{
STR dc = channel == AnalogChannel.ChA ? STR.CHA_DCCOUPLING : STR.CHB_DCCOUPLING;
return StrobeMemory[dc].GetBool() ? Coupling.DC : Coupling.AC;
}
public static REG YOffsetRegister(this AnalogChannel ch)
{
return((ch == AnalogChannel.ChA) ? REG.CHA_YOFFSET_VOLTAGE :
/*(ch == AnalogChannel.ChB) ?*/ REG.CHB_YOFFSET_VOLTAGE);
}
private AnalogChannelRaw(AnalogChannel ch) : base(ch.Name + "Raw", ch.Value, typeof(byte))
{
}
public static AnalogChannelRaw Raw(this AnalogChannel ch)
{
return((AnalogChannelRaw)ch);
}
public GainCalibration getCalibration(AnalogChannel ch, double divider, double multiplier)
{
return gainCalibration.Where(x => x.channel == ch && x.divider == divider && x.multiplier == multiplier).First();
}
public void SetDummyWaveAmplitude(AnalogChannel channel, double amplitude)
{
ChannelConfig[channel].amplitude = amplitude;
}
private AnalogChannelRaw(AnalogChannel ch)
: base(ch.Name, ch.Value)
{
}
public void SetDummyWaveFrequency(AnalogChannel channel, double frequency)
{
ChannelConfig[channel].frequency = frequency;
}
private float ConvertYOffsetByteToVoltage(AnalogChannel channel, byte value)
{
double[] c = channelSettings[channel].coefficients;
float voltageSet = (float)(-value * c[1] - c[2] - c[0] * 127.0);
return ProbeScaleScopeToHost(channel, voltageSet);
}
public void SetDummyWavePhase(AnalogChannel channel, double phase)
{
ChannelConfig[channel].phase = phase;
}
public float GetYOffsetMin(AnalogChannel channel) { return ConvertYOffsetByteToVoltage(channel, yOffsetMin); }
public void SetDummyWaveDutyCycle(AnalogChannel channel, double dc)
{
ChannelConfig[channel].dutyCycle = dc > 1 ? 1 : dc < 0 ? 0 : dc;
}
public float[] GetVerticalRange(AnalogChannel channel)
{
int dividerIndex = Array.IndexOf (validDividers, channelSettings [channel].divider);
int multIndex = Array.IndexOf (validMultipliers, channelSettings [channel].multiplier);
return new float[] {
ProbeScaleScopeToHost(channel, (float)(baseVoltageRangeMin * rom.computedDividers[dividerIndex] / rom.computedMultipliers[multIndex])),
ProbeScaleScopeToHost(channel, (float)(baseVoltageRangeMax * rom.computedDividers[dividerIndex] / rom.computedMultipliers[multIndex]))
};
}
public void SetDummyWaveForm(AnalogChannel channel, AnalogWaveForm w)
{
ChannelConfig[channel].waveform = w;
}
public ProbeDivision GetProbeDivision(AnalogChannel ch)
{
return probeSettings[ch];
}
public void SetDummyWaveDcOffset(AnalogChannel channel, double dcOffset)
{
ChannelConfig[channel].dcOffset = dcOffset;
}
void SetMultiplier(AnalogChannel channel, double multiplier)
{
validateMultiplier(multiplier);
int bitOffset = channel.Value * 4;
byte mul = (byte)(Array.IndexOf(validMultipliers, multiplier) << 2);
byte mask = (byte)(0xC << bitOffset);
byte divMul = FpgaSettingsMemory[REG.DIVIDER_MULTIPLIER].GetByte();
divMul = (byte)((divMul & ~mask) + (mul << bitOffset));
FpgaSettingsMemory[REG.DIVIDER_MULTIPLIER].Set(divMul);
}
public void SetDummyWaveDcOffset(AnalogChannel channel, int bursts)
{
ChannelConfig[channel].bursts = bursts;
}
public void SetCoupling(AnalogChannel channel, Coupling coupling)
{
STR dc = channel == AnalogChannel.ChA ? STR.CHA_DCCOUPLING : STR.CHB_DCCOUPLING;
bool enableDc = coupling == Coupling.DC;
//Logger.Debug("Set DC coupling for channel " + channel + (enableDc ? " ON" : " OFF"));
StrobeMemory[dc].Set(enableDc);
}
public void SetNoiseAmplitude(AnalogChannel channel, double noiseAmplitude)
{
ChannelConfig[channel].noise = noiseAmplitude;
}
/// <summary>
/// Choose channel upon which to trigger
/// </summary>
/// <param name="channel"></param>
public void SetTriggerChannel(AnalogChannel channel)
{
this.triggerAnalog.channel = channel;
TriggerAnalog = this.triggerAnalog;
}
public void SetVerticalRange(AnalogChannel ch, float minimum, float maximum)
{
}
private float ProbeScaleScopeToHost(AnalogChannel ch, float volt)
{
return volt * probeSettings[ch];
}
private Dictionary <Channel, Array> SplitAndConvert(byte[] buffer, List <AnalogChannel> channels, SmartScopeHeader header, Dictionary <AnalogChannel, SmartScope.GainCalibration> channelSettings, int offset, int length)
{
int n_channels = channels.Count;
int n_samples = length / n_channels;
byte[][] splitRaw = new byte[n_channels][];
float[][] splitVolt = new float[n_channels][];
for (int j = 0; j < n_channels; j++)
{
splitRaw[j] = new byte[n_samples];
splitVolt[j] = new float[n_samples];
}
//this section converts twos complement to a physical voltage value
Dictionary <Channel, Array> result = new Dictionary <Channel, Array>();
for (int j = 0; j < n_channels; j++)
{
AnalogChannel ch = channels[j];
double[] coeff = channelSettings[ch].coefficients;
if (coeff.Length != 3)
{
throw new Exception(String.Format("Calibration coefficients are not of length 3, but {0} for ch {1} (n_ch:{2}", coeff.Length, ch.Name, n_channels));
}
byte yOffset = header.GetRegister(ch.YOffsetRegister());
float gain = probeSettings[ch];
float totalOffset = (float)(yOffset * coeff[1] + coeff[2]);
int k = j;
if (offset + n_channels * (n_samples - 1) + k >= buffer.Length)
{
throw new Exception(String.Format("Buffer will be addressed out of bounds. [offset:{0}][n_chan:{1}][length:{2}][n_samp:{3}][buf_len:{4}]", offset, n_channels, length, n_samples, buffer.Length));
}
for (int i = 0; i < n_samples; i++)
{
byte b = buffer[offset + k];
splitRaw[j][i] = b;
splitVolt[j][i] = (float)(b * coeff[0] + totalOffset) * gain;
k += n_channels;
}
}
for (int j = 0; j < n_channels; j++)
{
AnalogChannel ch = channels[j];
if (header.GetStrobe(STR.LA_ENABLE) && header.GetStrobe(STR.LA_CHANNEL) == ch.Value > 0)
{
if (j >= splitRaw.Length)
{
throw new Exception(String.Format("Assigning LA channel failing due to oob index {1} (len = {2})", j, splitRaw.Length));
}
result[LogicAnalyserChannel.LA] = splitRaw[j];
}
else
{
if (j >= splitVolt.Length)
{
throw new Exception(String.Format("Assigning Voltage channel failing due to oob index {1} (len = {2})", j, splitVolt.Length));
}
result[ch] = splitVolt[j];
}
if (j >= splitRaw.Length)
{
throw new Exception(String.Format("Assigning RAW failing due to oob index {1} (len = {2})", j, splitRaw.Length));
}
result[ch.Raw()] = splitRaw[j];
}
return(result);
}