//保存
public void SaveXML()
{
try
{
XElement root = new XElement("Recipe");
XMLHelper.AddIdentifier(root, IdentifyString);
XMLHelper.AddParameters(root, iniParameters, IdentifyString);
XMLHelper.AddRegion(root, DieUserRegions, "Die_Regions");
root.Save(XmlPath);
if (iniObjects.Image == null || !iniObjects.Image.IsInitialized())
{
MessageBox.Show("请加载参考图像！");
return;
}
/*
* if (!Directory.Exists(iniParameters.TrainningImagesDirectory) )
* {
* MessageBox.Show("提示：训练图集没有加载！");
* }
*/
if (iniParameters.UserRegionForCutOutIndex < 1)
{
MessageBox.Show("请选择参考Die！");
return;
}
HOperatorSet.WriteImage(iniObjects.Image, "tiff", 0, IniDirectory + "ReferenceImage.tiff");
HOperatorSet.WriteTuple(iniParameters.ImagePath, IniDirectory + "ImagePath.tup");
HOperatorSet.WriteTuple(iniParameters.TrainningImagesDirectory, IniDirectory + "TrainningImagesDirectory.tup");
HOperatorSet.WriteTuple((int)(iniParameters.UserRegionForCutOutIndex), IniDirectory + "UserRegionForCutOutIndex.tup");
HOperatorSet.WriteTuple(iniParameters.DieImageRowOffset, IniDirectory + "DieImageRowOffset.tup");
HOperatorSet.WriteTuple(iniParameters.DieImageColumnOffset, IniDirectory + "DieImageColumnOffset.tup");
SaveHelper.WriteRegion(DieUserRegions, IniDirectory, "CoarseReference");
HOperatorSet.WriteRegion((createReference as CreateReference).SelectedUserRegion?.CalculateRegion, IniDirectory + "DieReference.reg");
//1121-lht
//HOperatorSet.ReadTuple(IniDirectory + "ImageChannelnumber.tup", out HTuple ImageChannelnumber);
HOperatorSet.WriteTuple(iniParameters.ImageCountChannels, IniDirectory + "ImageChannelnumber.tup");
/* 功能拓展
* if (iniParameters.ImageCountChannels == 3)
* {
* HOperatorSet.WriteImage(iniObjects.ImageR, "tiff", 0, ChannelImageDirectory + "ImageR.tiff");
* HOperatorSet.WriteImage(iniObjects.ImageG, "tiff", 0, ChannelImageDirectory + "ImageG.tiff");
* HOperatorSet.WriteImage(iniObjects.ImageB, "tiff", 0, ChannelImageDirectory + "ImageB.tiff");
* }
*/
}
catch (Exception ex)
{
MessageBox.Show(ex.ToString(), "缺少全局数据！");
}
}
//保存
public void SaveXML()
{
try
{
Directory.GetFiles(ModelsDirectory).ToList().ForEach(File.Delete);
XElement root = new XElement("Recipe");
XMLHelper.AddIdentifier(root, IdentifyString);
XElement cutRegionParameterNode = new XElement("CutRegionParameter");
// 保存初始cutReg, 即膨胀前参数 0125 lw
XElement CutRegNode = new XElement("CutRegions");
XMLHelper.AddRegion(CutRegNode, OriRegionUserRegions, "CutReg", false, false, false, false);
//Models下保存FreeRegion add by 2020-12-24
foreach (var item in OriRegionUserRegions)
{
if (item.RegionType == RegionType.Region)
{
//HOperatorSet.ReadRegion(out HObject freeRegion, $"{ ProductDirctory}\\{ item.RegionPath}");
HOperatorSet.WriteRegion(item.CalculateRegion, $"{ProductDirctory}\\{item.RegionPath}");
}
}
//HOperatorSet.MoveRegion(Algorithm.Region.ConcatRegion(CutRegionUserRegions), out HObject CutRegion, CutRegionParameter.DieImageRowOffset, CutRegionParameter.DieImageColumnOffset);//
//HTuple file = new HTuple();
//file = $"{ModelsFile}\\{ CutRegionParameter.OnRecipesIndexs[CutRegionParameter.OnRecipesIndex]}\\";
//HOperatorSet.WriteRegion(CutRegion, file + "CutRegions.reg");
cutRegionParameters = new HTuple();
CutRegionRecipeNames = new HTuple();
foreach (var item in CutRegionUserRegions)
{
HOperatorSet.TupleConcat(cutRegionParameters, item.RegionParameters[0], out cutRegionParameters);
HOperatorSet.TupleConcat(CutRegionRecipeNames, item.RecipeNames, out CutRegionRecipeNames);
}
HOperatorSet.WriteTuple(cutRegionParameters, $"{ModelsDirectory}CutRegionParameters.tup");
HOperatorSet.WriteTuple(CutRegionRecipeNames, $"{ModelsDirectory}CutRegionRecipeNames.tup");
CutRegionParameter.CutRegionParameters = cutRegionParameters;
XMLHelper.AddParameters(cutRegionParameterNode, CutRegionParameter, IdentifyString);
root.Add(cutRegionParameterNode);
root.Add(CutRegNode);
root.Save(XmlPath);
}
catch (Exception ex)
{
MessageBox.Show(ex.ToString());
}
}
//加载
//--------保存XML
public void SaveXML()
{
try
{
Directory.GetFiles(ModelsDirectory).ToList().ForEach(File.Delete);
//Directory.GetFiles(RecipeDirectory).ToList().ForEach(File.Delete);
XElement root = new XElement("Recipe");
XMLHelper.AddIdentifier(root, IdentifyString);
XElement AroundBondRegInspectParameterNode = new XElement("AroundBondRegInspectParameter");
XMLHelper.AddParameters(AroundBondRegInspectParameterNode, AroundBondRegInspectParameter, IdentifyString);
XElement AroundBondRegNode = new XElement("AroundBondRegions");
XMLHelper.AddRegion(AroundBondRegNode, AroundBondRegUserRegions, "AroundBondReg", false, false, false, true);
//if (AroundBondDetectionObject.RejectRegion != null)
//{
// //当拒绝区是不规则区域时，拒绝区域保存在Models下
// HOperatorSet.WriteRegion(goldenModelObject.RejectRegion, $"{ModelsRecipeDirectory}" + "Reject_FreeRegion.reg");
//}
foreach (var item in AroundBondRegUserRegions)
{
if (item.RegionType == RegionType.Region)
{
//HOperatorSet.ReadRegion(out HObject freeRegion, $"{ ProductDirctory}\\{ item.RegionPath}");
HOperatorSet.WriteRegion(item.CalculateRegion, $"{ProductDirctory}\\{item.RegionPath}");
}
}
root.Add(AroundBondRegInspectParameterNode);
root.Add(AroundBondRegNode);
root.Save(XmlPath);
}
catch (Exception ex)
{
MessageBox.Show(ex.ToString());
}
}
//保存
public void SaveXML()
{
Directory.GetFiles(ModelsDirectory).ToList().ForEach(File.Delete);
XElement root = new XElement("Recipe");
XMLHelper.AddIdentifier(root, IdentifyString);
XElement epoxyParameterNode = new XElement("EpoxyParameter");
XElement epoxyModelVerifyParameterNode = new XElement("EpoxyModelVerifyParameter");
XMLHelper.AddParameters(epoxyParameterNode, epoxyParameter, IdentifyString);
XMLHelper.AddParameters(epoxyModelVerifyParameterNode, epoxyModelVerifyParameter, IdentifyString);
XMLHelper.AddRegion(root, epoxyUserRegions, "EpoxyUserRegions", true);
XMLHelper.AddRegion(root, epoxyReferceUserRegions, "EpoxyReferceUserRegions", false);
root.Add(epoxyParameterNode);
root.Add(epoxyModelVerifyParameterNode);
root.Save(XmlPath);
HOperatorSet.WriteRegion(Algorithm.Region.ConcatRegion(epoxyUserRegions), $"{ModelsDirectory}Inspect_Regions.reg");
HOperatorSet.WriteRegion((epoxyReferceUserRegions.Where(r => r.IsEnable).Select(r => r.CalculateRegion)).FirstOrDefault(), $"{ModelsDirectory}Reference_Region.reg");
if (epoxyParameter.ImageCountChannels == 1)
{
HOperatorSet.WriteTuple(new HTuple(1), ModelsDirectory + "Image_Index.tup");
}
else if (epoxyParameter.ImageCountChannels > 1)
{
HOperatorSet.WriteTuple(epoxyModelVerifyParameter.ImageChannelIndex + 1, ModelsDirectory + "Image_Index.tup");
}
try
{
if (epoxyParameter.OnRecipesIndex >= 0)
{
HOperatorSet.WriteTuple(epoxyParameter.OnRecipesIndexs[epoxyParameter.OnRecipesIndex], $"{ModelsDirectory}OnWhat.tup");
}
}
catch (Exception)//改
{
MessageBox.Show("请选择\"银胶属于\"位置！");
}
}
public override void SaveXML()
{
try
{
Directory.GetFiles(ModelsRecipeDirectory).ToList().ForEach(File.Delete);
UserRegion userRegion = (cutOutDie as CutOutDie).UserRegionForCutOut;
if (userRegion != null)
{
goldenModelParameter.UserRegionForCutOutIndex = userRegion.Index;
}
XElement root = new XElement("Recipe");
XMLHelper.AddIdentifier(root, IdentifyString);
XElement goldenModelParameterNode = new XElement("GoldenModelParameter");
XElement goldenModelInspectParameterNode = new XElement("GoldenModelInspectParameter");
XMLHelper.AddRegion(root, dieUserRegions, "Die_Regions");
XMLHelper.AddRegion(root, matchUserRegions, "Match_Region");
XMLHelper.AddRegion(root, inspectUserRegions, "Inspect_Region");
XMLHelper.AddRegion(root, subUserRegions, "Sub_Regions");
XMLHelper.AddRegion(root, rejectUserRegions, "Reject_Region");
if (goldenModelObject.RejectRegion != null)
{
//当拒绝区是不规则区域时，拒绝区域保存在Models下
HOperatorSet.WriteRegion(goldenModelObject.RejectRegion, $"{ModelsRecipeDirectory}" + "Reject_FreeRegion.reg");
}
XMLHelper.AddParameters(goldenModelParameterNode, goldenModelParameter, IdentifyString);
XMLHelper.AddParameters(goldenModelInspectParameterNode, goldenModelInspectParameter, IdentifyString);
root.Add(goldenModelParameterNode);
root.Add(goldenModelInspectParameterNode);
root.Save(XmlPath);
if (goldenModelParameter.OnRecipesIndexs.Length > 0)
{
HOperatorSet.WriteTuple(goldenModelParameter.OnRecipesIndexs?[goldenModelParameter.OnRecipesIndex], ModelsRecipeDirectory + "OnWhat.tup");
}
HOperatorSet.WriteTuple(goldenModelInspectParameter.AngleStart, ModelsRecipeDirectory + "AngleStart.tup");
HOperatorSet.WriteTuple(goldenModelInspectParameter.AngleExt, ModelsRecipeDirectory + "AngleExt.tup");
HOperatorSet.WriteTuple(goldenModelInspectParameter.MinMatchScore, ModelsRecipeDirectory + "MinMatchScore.tup");
HOperatorSet.WriteTuple(goldenModelInspectParameter.MatchNum, ModelsRecipeDirectory + "MatchNum.tup");
HOperatorSet.WriteTuple(goldenModelInspectParameter.DilationSize, ModelsRecipeDirectory + "DilationSize.tup");
HOperatorSet.WriteRegion(Algorithm.Region.Union1Region(matchUserRegions), ModelsRecipeDirectory + "Match_Region.reg");
HOperatorSet.WriteRegion(Algorithm.Region.Union1Region(inspectUserRegions), ModelsRecipeDirectory + "Inspect_Region.reg");
HOperatorSet.WriteRegion(Algorithm.Region.Union1Region(rejectUserRegions), ModelsRecipeDirectory + "Reject_Region.reg");
HOperatorSet.WriteRegion(Algorithm.Region.Union1Region(subUserRegions), ModelsRecipeDirectory + "Sub_Region.reg");
if (goldenModelParameter.ImageCountChannels == 1)
{
HOperatorSet.WriteTuple((new HTuple(1)).TupleConcat(new HTuple(1)).TupleConcat(new HTuple(1)), ModelsRecipeDirectory + "Image_Index.tup");
}
else if (goldenModelParameter.ImageCountChannels > 1)
{
// 1122-lw
HOperatorSet.WriteTuple((new HTuple(goldenModelParameter.ImageChannelIndex + 1))
.TupleConcat(new HTuple(goldenModelParameter.ImageGoldChannelIndex + 1))
.TupleConcat(new HTuple(goldenModelInspectParameter.ImageChannelIndex_IcExist + 1)),
ModelsRecipeDirectory + "Image_Index.tup");
}
HOperatorSet.WriteTuple(new HTuple(goldenModelInspectParameter.IsICExist == false ? 0 : 1)
.TupleConcat(new HTuple(goldenModelInspectParameter.IsICLocate == false ? 0 : 1))
.TupleConcat(new HTuple(goldenModelInspectParameter.IsICOffSet == false ? 0 : 1))
.TupleConcat(new HTuple(goldenModelInspectParameter.IsICSurfaceInspect == false ? 0 : 1)),
ModelsRecipeDirectory + "TaskEnable.tup");
if (goldenModelParameter.ModelType == 0)
{
HOperatorSet.WriteTuple(new HTuple("ncc"), $"{ModelsRecipeDirectory}Model_Type.tup");
}
else if (goldenModelParameter.ModelType == 1)
{
HOperatorSet.WriteTuple(new HTuple("shape"), $"{ModelsRecipeDirectory}Model_Type.tup");
}
}
catch (System.Exception ex)
{
MessageBox.Show(ex.ToString());
}
try
{
if (File.Exists($"{RecipeDirectory}PosModel.dat") || goldenModelObject.PosModelID != null)
{
if (goldenModelParameter.ModelIdPath.Split(',').Length == 1)
{
if (File.Exists($"{RecipeDirectory}PosModel.dat") || goldenModelObject.PosModelID != null)
{
if (goldenModelObject.PosModelID != null)
{
Algorithm.File.SaveModel(ModelsRecipeDirectory + "PosModel.dat", goldenModelParameter.ModelType, goldenModelObject.PosModelID);
}
else if (File.Exists($"{RecipeDirectory}PosModel.dat"))
{
HTuple PosModelId = Algorithm.File.ReadModel($"{RecipeDirectory}PosModel.dat", goldenModelParameter.ModelType);
Algorithm.File.SaveModel(ModelsRecipeDirectory + "PosModel.dat", goldenModelParameter.ModelType, PosModelId);
// 清除模板 lw 0121
Algorithm.Model_RegionAlg.HTV_clear_model_recipe(PosModelId, goldenModelParameter.ModelType);
}
}
else
{
MessageBox.Show("请创建定位模板！");
}
}
else
{
if (goldenModelObject.PosModelID != null)
{
String[] ModelIdPathArry = new string[goldenModelObject.PosModelID.TupleLength()];
for (int i = 0; i < goldenModelObject.PosModelID.TupleLength(); i++)
{
ModelIdPathArry[i] = $"{ModelsRecipeDirectory}PosModel_" + i + ".dat";
}
goldenModelParameter.ModelIdPath = String.Join(",", ModelIdPathArry);
Algorithm.File.SaveModel(ModelIdPathArry, goldenModelParameter.ModelType, goldenModelObject.PosModelID);
}
else if (File.Exists($"{RecipeDirectory}PosModel.dat"))
{
HTuple ModelId = Algorithm.File.ReadModel($"{RecipeDirectory}PosModel.dat".Split(','), goldenModelParameter.ModelType);
String[] ModelIdPathArry = new string[ModelId.TupleLength()];
for (int i = 0; i < ModelId.TupleLength(); i++)
{
ModelIdPathArry[i] = $"{ModelsRecipeDirectory}PosModel_" + i + ".dat";
}
Algorithm.File.SaveModel(ModelIdPathArry, goldenModelParameter.ModelType, ModelId);
// 清除模板 lw 0121
Algorithm.Model_RegionAlg.HTV_clear_model_recipe(ModelId, goldenModelParameter.ModelType);
}
}
}
if (goldenModelObject.MeadImage != null && goldenModelObject.StdImage != null)
{
HOperatorSet.WriteImage(goldenModelObject.MeadImage, "tiff", 0, ModelsRecipeDirectory + "Mean_Image.tiff");
//HOperatorSet.WriteImage(goldenModelObject.StdImage, "tiff", 0, ModelsRecipeDirectory + "Std_Image.tiff");
}
else if (File.Exists($"{RecipeDirectory}Mean_Image.tiff") /*&& File.Exists($"{RecipeDirectory}Std_Image.tiff")*/)
{
HOperatorSet.ReadImage(out HObject Mean_Image, $"{RecipeDirectory}Mean_Image.tiff");
//HOperatorSet.ReadImage(out HObject Std_Image, $"{RecipeDirectory}Std_Image.tiff"); // 1206
HOperatorSet.WriteImage(Mean_Image, "tiff", 0, ModelsRecipeDirectory + "Mean_Image.tiff");
//HOperatorSet.WriteImage(Std_Image, "tiff", 0, ModelsRecipeDirectory + "Std_Image.tiff");
}
else
{
MessageBox.Show("请生成均值方差图！");
}
if (goldenModelObject.LightImage != null && goldenModelObject.DarkImage != null)
{
HOperatorSet.WriteImage(goldenModelObject.LightImage, "tiff", 0, ModelsRecipeDirectory + "Light_Image.tiff");
HOperatorSet.WriteImage(goldenModelObject.DarkImage, "tiff", 0, ModelsRecipeDirectory + "Dark_Image.tiff");
}
else if (File.Exists($"{RecipeDirectory}Light_Image.tiff") && File.Exists($"{RecipeDirectory}Dark_Image.tiff"))
{
HOperatorSet.ReadImage(out HObject Light_Image, $"{RecipeDirectory}Light_Image.tiff");
HOperatorSet.ReadImage(out HObject Dark_Image, $"{RecipeDirectory}Dark_Image.tiff");
HOperatorSet.WriteImage(Light_Image, "tiff", 0, ModelsRecipeDirectory + "Light_Image.tiff");
HOperatorSet.WriteImage(Dark_Image, "tiff", 0, ModelsRecipeDirectory + "Dark_Image.tiff");
}
else
{
MessageBox.Show("请生成亮图像、暗图像！");
}
}
catch (System.Exception ex)
{
MessageBox.Show(ex.ToString());
}
}
//保存
public void SaveXML()
{
try
{
Directory.GetFiles(ModelsBondDirectory).ToList().ForEach(File.Delete);
XElement root = new XElement("Recipe");
XMLHelper.AddIdentifier(root, IdentifyString);
XElement bond2ModelNode = new XElement("Bond2Models");
HTuple Bond2_ModelImgIdxTemp = new HTuple();
foreach (var model in bond2Models)
{
XElement modelNode = new XElement("Model");
modelNode.Add(new XAttribute("Index", model.Index.ToString()));
//modelNode.Add(new XAttribute("ModelType", model.ModelType.ToString()));
modelNode.Add(new XAttribute("ModelIDPath", model.ModelIdPath));
modelNode.Add(new XElement("RotatedImagePath", model.RotatedImagePath));
modelNode.Add(new XElement("RotatedImageAngel", model.RotatedImageAngel));
modelNode.Add(new XAttribute("ImageIndex", model.ImageIndex.ToString()));
modelNode.Add(model.Bond2UserRegion?.ToXElement("Bond2ModelRegion"));
modelNode.Add(model.Bond2UserRegionDiff?.ToXElement("Bond2ModelRegionDiff"));
modelNode.Add(model.RotateLineUserRegion?.ToXElement("RotateLineRegion"));
XMLHelper.AddRegion(modelNode, model.RefineUserRegions, "RefineRegions");
bond2ModelNode.Add(modelNode);
if (bond2ModelParameter.ModelType == 0)
{
HOperatorSet.WriteTuple(new HTuple("ncc"), $"{ModelsBondDirectory}Model_Type.tup");
}
else if (bond2ModelParameter.ModelType == 1)
{
HOperatorSet.WriteTuple(new HTuple("shape"), $"{ModelsBondDirectory}Model_Type.tup");
}
model.RotatedImagePath = $"{BondDirectory}\\RotatedImage{model.Index.ToString()}.tiff";
HOperatorSet.ReadImage(out HObject rotatedImage, model.RotatedImagePath);
HOperatorSet.WriteImage(rotatedImage, "tiff", 0, $"{ModelsBondDirectory}RotatedImage{model.Index.ToString()}.tiff");
}
XElement bond2ModelParameterNode = new XElement("Bond2ModelParameter");
XElement bondAutoRegionsParameterNode = new XElement("BondAutoRegionsParameter");//自动生成
XElement bondWireParameterNode = new XElement("BondWireParameter");
XElement BondVerifyModelParaNode = new XElement("BondVerifyModelPara");
XMLHelper.AddParameters(bond2ModelParameterNode, bond2ModelParameter, IdentifyString);
XMLHelper.AddParameters(bondWireParameterNode, bondWireParameter, IdentifyString);
XMLHelper.AddParameters(BondVerifyModelParaNode, BondVerifyModelPara, IdentifyString);
XMLHelper.AddParameters(bondAutoRegionsParameterNode, bondAutoRegionsParameter, IdentifyString);//自动生成
root.Add(bond2ModelNode);
root.Add(bond2ModelParameterNode);
root.Add(bondWireParameterNode);
root.Add(BondVerifyModelParaNode); //保存批量设置的模板检测参数
root.Add(bondAutoRegionsParameterNode); //自动生成
//XML保存检测区域带参数 add by wj
XMLHelper.AddRegion(root, BondVerifyUserRegions, "BondVerifyUserRegions", false, false, false, false, true);//xml中加载生成的焊盘区域 2021-01-11
try
{
if (bond2ModelParameter.ModelIdPath.Split(',').Length >= 1 || bond2ModelObject.ModelID != null)
{
HTuple ModelId = new HTuple();
if (File.Exists($"{BondDirectory}PosModel.dat"))
{
if (bond2ModelObject.ModelID != null)
{
ModelId = bond2ModelObject.ModelID;
}
else if (File.Exists($"{BondDirectory}PosModel.dat"))
{
ModelId = Algorithm.File.ReadModel($"{BondDirectory}PosModel.dat", bond2ModelParameter.ModelType);
}
Algorithm.File.SaveModel($"{ModelsBondDirectory}PosModel.dat", bond2ModelParameter.ModelType, ModelId);
}
}
else
{
MessageBox.Show("请先创建焊点模板");
}
}
catch (Exception ex)
{
MessageBox.Show("焊点不存在或保存失败");
}
XElement GroupNode = new XElement("GenGroups");
XElement bondWireGroupNode = new XElement("BondWireGroups");
HTuple Bond2_BallNumsTemp = new HTuple();
HTuple LineStartAngle = new HTuple();
HOperatorSet.GenEmptyObj(out HObject Bond2_Regions);
foreach (var group in Groups)
{
XElement _groupNode = new XElement("GenGroup");
_groupNode.Add(new XAttribute("Index", group.Index.ToString()));
_groupNode.Add(new XAttribute("Bond2Numbers", group.Bond2_BallNums.ToString()));
_groupNode.Add(group.Bond2UserRegion?.ToXElement("Bond2Region"));
_groupNode.Add(group.WireUserRegion?.ToXElement("WireRegion"));
GroupNode.Add(_groupNode);
}
root.Add(GroupNode);
foreach (var group in bondWireRegionGroups)
{
XElement groupNode = new XElement("BondWireGroup");
groupNode.Add(new XAttribute("Index", group.Index.ToString()));
groupNode.Add(new XAttribute("Bond2Numbers", group.Bond2_BallNums.ToString()));
groupNode.Add(group.Bond2UserRegion?.ToXElement("Bond2Region"));
groupNode.Add(group.WireUserRegion?.ToXElement("WireRegion"));
bondWireGroupNode.Add(groupNode);
HOperatorSet.ConcatObj(Bond2_Regions, Algorithm.Region.ConcatRegion(group.Bond2UserRegion), out Bond2_Regions);
//Bond2_BallNumsTemp = Bond2_BallNumsTemp.TupleConcat(group.Bond2_BallNums);
//HOperatorSet.AngleLx(group.WireUserRegion.RegionParameters[0], group.WireUserRegion.RegionParameters[1], group.WireUserRegion.RegionParameters[2], group.WireUserRegion.RegionParameters[3],
// out HTuple lineAngle);
//HOperatorSet.TupleConcat(LineStartAngle, lineAngle, out LineStartAngle);
}
HOperatorSet.WriteRegion(Bond2_Regions, $"{ModelsBondDirectory}Inspect_Regions.reg");
root.Add(bondWireGroupNode);
root.Save(XmlPath);
//
try
{
if (bond2ModelParameter.OnRecipesIndexs.Length > 0)
{
HOperatorSet.WriteTuple(bond2ModelParameter.OnRecipesIndexs[bond2ModelParameter.OnRecipesIndex], $"{ModelsBondDirectory}OnWhat.tup");
}
}
catch (Exception)
{
MessageBox.Show("请选择\"焊点在\"位置！");
}
//if (bond2ModelParameter.ImageCountChannels == 1)
//{
// HOperatorSet.WriteTuple(new HTuple(1), ModelsBondDirectory + "Image_Index.tup");
//}
//else if (bond2ModelParameter.ImageCountChannels > 1)
//{
// // 1122_lw
// HOperatorSet.WriteTuple(bondWireParameter.ImageChannelIndex + 1, ModelsBondDirectory + "Image_Index.tup");
//}
//HOperatorSet.WriteTuple(Bond2_BallNumsTemp, $"{ModelsBondDirectory}BallNum_OnRegion.tup");
//HOperatorSet.WriteTuple(LineStartAngle, $"{ModelsBondDirectory}Match_StartAngle.tup");
//HOperatorSet.WriteTuple(bondWireParameter.MinMatchScore, $"{ModelsBondDirectory}Match_MinScore.tup");// MinMatchScore
//HOperatorSet.WriteTuple(bondWireParameter.AngleExt, $"{ModelsBondDirectory}Match_AngleExt.tup");// AngleExt
//if (bondWireParameter.IsCircleBond == true)
//{
// HOperatorSet.WriteTuple(bondWireParameter.BondSize, $"{ModelsBondDirectory}BallRadius.tup");
//}
//else
//{
// HOperatorSet.WriteTuple(new HTuple(bondWireParameter.EllipsBondSize[0]).TupleConcat(new HTuple(bondWireParameter.EllipsBondSize[1])), $"{ModelsBondDirectory}BallRadius.tup");
//}
//HOperatorSet.WriteTuple(bondWireParameter.IsBondRegRefine == false ? 0 : 1, $"{ModelsBondDirectory}IsBondRegRefine.tup");
//HOperatorSet.WriteTuple(bondWireParameter.AddBallNum, $"{ModelsBondDirectory}AddBallNum.tup");
//HOperatorSet.WriteTuple(bondWireParameter.MaxOverlap, $"{ModelsBondDirectory}MaxOverlap.tup");
//HOperatorSet.WriteTuple(bondWireParameter.MinHistScore, $"{ModelsBondDirectory}MinHistScore.tup");
}
catch (Exception ex)
{
MessageBox.Show(ex.ToString());
}
}
//保存 后续添加
public void SaveXML()
{
try
{
XElement root = new XElement("Recipe");
XMLHelper.AddIdentifier(root, IdentifyString);
XElement surfaceDetectionParameterNode = new XElement("SurfaceDetectionParameter");
XElement frameInspectParameterNode = new XElement("FrameInspectParameter");
XElement pegRackInspectParameterNode = new XElement("PegRackInspectParameter");
XElement bridgeModelInspectParameterNode = new XElement("BridgeInspectParameter");
XMLHelper.AddIdentifier(root, IdentifyString);
XMLHelper.AddParameters(surfaceDetectionParameterNode, SurfaceDetectionParameter, IdentifyString);
XMLHelper.AddParameters(frameInspectParameterNode, FrameModelInspectParameter, IdentifyString);
XMLHelper.AddParameters(pegRackInspectParameterNode, PegRackModelInspectParameter, IdentifyString);
XMLHelper.AddParameters(bridgeModelInspectParameterNode, BridgeModelInspectParameter, IdentifyString);
root.Add(surfaceDetectionParameterNode);
root.Add(frameInspectParameterNode);
root.Add(pegRackInspectParameterNode);
root.Add(bridgeModelInspectParameterNode);
root.Save(XmlPath);
root.Save($"{RecipeFile}{SurfaceDetectionParameter.OnRecipesIndexs[SurfaceDetectionParameter.OnRecipesIndex]}\\{XmlName}");
if (SurfaceDetectionParameter.OnRecipesIndex != -1)
{
if (SurfaceDetectionParameter.ImageCountChannels == 1)
{
HOperatorSet.WriteTuple((new HTuple(1)).TupleConcat(new HTuple(1)).TupleConcat(new HTuple(1)),
$"{ModelsFile}{SurfaceDetectionParameter.OnRecipesIndexs[SurfaceDetectionParameter.OnRecipesIndex]}\\Inspect_ImageIndex.tup");
}
else if (SurfaceDetectionParameter.ImageCountChannels > 1)
{
if (FrameModelInspectParameter.ImageFrameVerifyChannelIndex < 0 || PegRackModelInspectParameter.ImagePegRackVerifyChannelIndex < 0 || BridgeModelInspectParameter.ImageBridgeVerifyChannelIndex < 0)
{
MessageBox.Show("没有选择检测验证通道图像！");
}
else
{
//保存在所选框架上 暂时保存在同一个框架上 1211 lw 图层+1
HOperatorSet.WriteTuple((new HTuple(FrameModelInspectParameter.ImageFrameVerifyChannelIndex + 1))
.TupleConcat(new HTuple(PegRackModelInspectParameter.ImagePegRackVerifyChannelIndex + 1))
.TupleConcat(new HTuple(BridgeModelInspectParameter.ImageBridgeVerifyChannelIndex + 1)),
$"{ModelsFile}{SurfaceDetectionParameter.OnRecipesIndexs[SurfaceDetectionParameter.OnRecipesIndex]}\\Inspect_ImageIndex.tup");
}
}
HOperatorSet.WriteTuple(new HTuple(FrameModelInspectParameter.IsFrameSurfaceInspect == false ? 0 : 1)
.TupleConcat(new HTuple(PegRackModelInspectParameter.IsPegRackSurfaceInspect == false ? 0 : 1))
.TupleConcat(new HTuple(BridgeModelInspectParameter.IsBridgeSurfaceInspect == false ? 0 : 1)), $"{ModelsFile}{SurfaceDetectionParameter.OnRecipesIndexs[SurfaceDetectionParameter.OnRecipesIndex]}\\TaskEnable.tup");
}
HOperatorSet.WriteTuple(new HTuple(FrameModelInspectParameter.IsFrameSurfaceInspect == false ? 0 : 1)
.TupleConcat(new HTuple(PegRackModelInspectParameter.IsPegRackSurfaceInspect == false ? 0 : 1))
.TupleConcat(new HTuple(BridgeModelInspectParameter.IsBridgeSurfaceInspect == false ? 0 : 1)), ModelsDirectory + "TaskEnable.tup");
}
catch (System.Exception ex)
{
MessageBox.Show(ex.ToString());
}
}
public void SaveXML()
{
try
{
Directory.GetFiles(ModelsDirectory).ToList().ForEach(File.Delete);
XElement root = new XElement("Recipe");
XMLHelper.AddIdentifier(root, IdentifyString);
//
XElement wireParameterNode = new XElement("WireParameter");
XMLHelper.AddParameters(wireParameterNode, wireParameter, IdentifyString);
//保存起始焊点归属
XMLHelper.AddOnRecipes(root, startBondOnRecipes, "StartBondOnRecipes");
XMLHelper.AddRegion(root, startBallAutoUserRegion, "StartBallAutoUserRegion", false, false, false, false);
//保存结束焊点归属
XMLHelper.AddOnRecipes(root, endBondOnRecipes, "EndBondOnRecipes");
XMLHelper.AddRegion(root, stopBallAutoUserRegion, "StopBallAutoUserRegion", false, false, false, false);
//金线模板组合
XElement wireRegionsModelGroupNode = new XElement("WireRegionsModelGroup");
foreach (var modelGroup in wireRegionsModelGroup)
{
XElement modelGroupNode = new XElement("ModelGroup");
//组号索引
modelGroupNode.Add(new XAttribute("Index", modelGroup.Index.ToString()));
//金线模板序号选择
modelGroupNode.Add(new XAttribute("SelectModelNumber", modelGroup.SelectModelNumber.ToString()));
//模板起始焊点，结束焊点，焊点点金线，金线检测区域带参数
modelGroupNode.Add(modelGroup.ModelStartUserRegions?.ToXElement("ModelStartUserRegions"));
modelGroupNode.Add(modelGroup.ModelStopUserRegions?.ToXElement("ModelStopUserRegions"));
modelGroupNode.Add(modelGroup.RefLineModelRegions?.ToXElement("RefLineModelRegions"));
XMLHelper.AddRegion(modelGroupNode, modelGroup.LineModelRegions, "LineModelRegions", false, false, true, false);
wireRegionsModelGroupNode.Add(modelGroupNode);
}
//-----金线检测区域精修及保存区域
XElement wireRegionsGroupNode = new XElement("WireRegionsGroup");
foreach (var group in wireRegionsGroup)
{
XElement groupNode = new XElement("Group");
groupNode.Add(new XAttribute("Index", group.Index.ToString()));
groupNode.Add(group.BondOnICUserRegions?.ToXElement("BondOnICUserRegions"));
groupNode.Add(group.BondOnFrameUserRegions?.ToXElement("BondOnFrameUserRegions"));
//groupNode.Add(group.RefLineUserRegions?.ToXElement("RefLineUserRegions"));
XMLHelper.AddRegion(groupNode, group.LineUserRegions, "LineUserRegions", false, true, false, false);
wireRegionsGroupNode.Add(groupNode);
}
root.Add(wireParameterNode);
root.Add(wireRegionsModelGroupNode);
root.Add(wireRegionsGroupNode);
root.Save(XmlPath);
HOperatorSet.GenEmptyObj(out HObject LineRegions);
HTuple LineRegionsNumbers = new HTuple();
HOperatorSet.WriteRegion(Algorithm.Region.ConcatRegion(wireRegionsGroup.Select(r => r.BondOnFrameUserRegions).Where(r => r.IsEnable).Select(r => r.CalculateRegion)), ModelsDirectory + "Start_Regions.reg");
HOperatorSet.WriteRegion(Algorithm.Region.ConcatRegion(wireRegionsGroup.Select(r => r.BondOnICUserRegions).Where(r => r.IsEnable).Select(r => r.CalculateRegion)), ModelsDirectory + "Stop_Regions.reg");
foreach (var group in wireRegionsGroup)
{
LineRegions = LineRegions.ConcatObj(Algorithm.Region.ConcatRegion((group.LineUserRegions).Where(r => r.IsEnable).Select(r => r.CalculateRegion)));
LineRegionsNumbers = LineRegionsNumbers.TupleConcat(group.LineUserRegions.Count);
}
if (wireParameter.ImageCountChannels == 1)
{
HOperatorSet.WriteTuple(new HTuple(1), ModelsDirectory + "Image_Index.tup");
}
else if (wireParameter.ImageCountChannels > 1)
{
HOperatorSet.WriteTuple(wireParameter.ImageIndex + 1, ModelsDirectory + "Image_Index.tup");
}
HOperatorSet.WriteRegion(LineRegions, ModelsDirectory + "Inspect_Regions.reg");
HOperatorSet.WriteTuple(LineRegionsNumbers, RecipeDirectory + "InspectRegNum.tup");
HOperatorSet.WriteTuple(LineRegionsNumbers, ModelsDirectory + "InspectRegNum.tup");//Recipe下
HOperatorSet.WriteTuple(wireParameter.IsTailInspect == false ? 0 : 1, ModelsDirectory + "IsInspectTail.tup");
//保存起始焊点区域归属
HTuple StartRegBelongToWhat = new HTuple();
foreach (var StartonRecipe in startBondOnRecipes)
{
if (StartonRecipe.IsSelected)
{
HOperatorSet.TupleConcat(StartRegBelongToWhat, new HTuple(StartonRecipe.Name), out StartRegBelongToWhat);
}
}
HOperatorSet.WriteTuple(StartRegBelongToWhat, ModelsDirectory + "StartRegBelongToWhat.tup");
//1104 改成存带拾取顺序的组合焊点
HOperatorSet.WriteTuple(new HTuple(wireParameter.StartBondonRecipesIndexs), ModelsDirectory + "StartRegBelongToWhat.tup");
//保存结束焊点区域归属
HTuple StopRegBelongToWhat = new HTuple();
foreach (var StoponRecipe in endBondOnRecipes)
{
if (StoponRecipe.IsSelected)
{
HOperatorSet.TupleConcat(StopRegBelongToWhat, new HTuple(StoponRecipe.Name), out StopRegBelongToWhat);
}
}
HOperatorSet.WriteTuple(StopRegBelongToWhat, ModelsDirectory + "StopRegBelongToWhat.tup");
//1104 改成存带拾取顺序的组合焊点
HOperatorSet.WriteTuple(new HTuple(wireParameter.StopBondonRecipesIndexs), ModelsDirectory + "StopRegBelongToWhat.tup");
//1104 存储焊点组合后的重新排序信息
HTuple Startreg_index_after_sort = new HTuple();
HTuple ni;
ni = 0;
bool start_group_sort = false;
foreach (var start_reg in startBallAutoUserRegion)
{
//HOperatorSet.TupleConcat(Startreg_index_after_sort, new HTuple(start_reg.Index), out Startreg_index_after_sort);
Startreg_index_after_sort[ni] = start_reg.Index_ini;
ni++;
if (ni != start_reg.Index_ini)
{
start_group_sort = true;
}
}
HOperatorSet.WriteTuple(Startreg_index_after_sort, ModelsDirectory + "Startreg_index_after_sort.tup");
HOperatorSet.WriteTuple(start_group_sort == false ? 0 : 1, ModelsDirectory + "Startreg_need_sort.tup");
HTuple Stopreg_index_after_sort = new HTuple();
ni = 0;
bool stop_group_sort = false;
foreach (var stop_reg in stopBallAutoUserRegion)
{
//HOperatorSet.TupleConcat(Stopreg_index_after_sort, new HTuple(stop_reg.Index), out Stopreg_index_after_sort);
Stopreg_index_after_sort[ni] = stop_reg.Index_ini;
ni++;
if (ni != stop_reg.Index_ini)
{
stop_group_sort = true;
}
}
HOperatorSet.WriteTuple(Stopreg_index_after_sort, ModelsDirectory + "Stopreg_index_after_sort.tup");
HOperatorSet.WriteTuple(stop_group_sort == false ? 0 : 1, ModelsDirectory + "Stopreg_need_sort.tup");
HOperatorSet.WriteTuple(new HTuple(wireParameter.IsEnableStartVirtualBond).TupleConcat(new HTuple(wireParameter.IsEnableEndVirtualBond)), ModelsDirectory + "IsEnableVirtualBond.tup");
}
catch (Exception ex)
{
MessageBox.Show(ex.ToString());
}
}
public void SaveXML()
{
try
{
Directory.GetFiles(ModelsBondDirectory).ToList().ForEach(File.Delete);
XElement root = new XElement("Recipe");
XMLHelper.AddIdentifier(root, IdentifyString);
XElement bondMeasureParameterNode = new XElement("BondMeasureParameter");
XElement bond1AutoRegionsParameterNode = new XElement("Bond1AutoRegionsParameter");//自动生成
XMLHelper.AddParameters(bondMeasureParameterNode, bondMeasureParameter, IdentifyString);
if (bond1AutoRegionsParameter.RotatedImagePath == null)
{
// 1122
bond1AutoRegionsParameter.RotatedImagePath = "";
}
XMLHelper.AddParameters(bond1AutoRegionsParameterNode, bond1AutoRegionsParameter, IdentifyString);//自动生成
XMLHelper.AddRegion(root, bondModelUserRegions, "BondModelUserRegions", true);
//XMLHelper.AddRegion(root, BondVerifyUserRegions, "BondVerifyUserRegions");//自动生成焊点检测区域
//
XMLHelper.AddRegion(root, PadUserRegions, "PadUserRegions", false, false, false, false, true);//xml中加载生成的焊盘区域 2021-01-05
XElement BondVerifyModelParaNode = new XElement("BondVerifyModelPara");
XMLHelper.AddParameters(BondVerifyModelParaNode, bondVerifyModelPara, IdentifyString);
root.Add(BondVerifyModelParaNode); //保存批量设置的模板检测参数
//models下保存焊盘区域
HOperatorSet.WriteRegion(Algorithm.Region.ConcatRegion(PadUserRegions), ModelsBondDirectory + "Pad_Regions.reg"); //add by wj 2021-0105
XMLHelper.AddRegion(root, Bond2UserRegion, "Bond2UserRegion");
XMLHelper.AddRegion(root, Bond2UserRegionDiff, "Bond2UserRegionDiff");
XMLHelper.AddRegion(root, RotateLineUserRegion, "RotateLineUserRegion");
XElement BondMeasureVerifyParameterNode = new XElement("BondMeasureVerifyParameter");
XElement bondWireGroupNode = new XElement("BondWireGroups");
XMLHelper.AddParameters(BondMeasureVerifyParameterNode, bondMeasureVerifyParameter, IdentifyString);
root.Add(bondMeasureParameterNode);
root.Add(bond1AutoRegionsParameterNode);//自动生成
root.Add(BondMeasureVerifyParameterNode);
//自动生成焊点区域部分
foreach (var group in bondWireRegionGroups)
{
XElement groupNode = new XElement("BondWireGroup");
groupNode.Add(new XAttribute("Index", group.Index.ToString()));
groupNode.Add(new XAttribute("Bond2Numbers", group.Bond2_BallNums.ToString()));
groupNode.Add(group.Bond2UserRegion?.ToXElement("Bond2Region"));
groupNode.Add(group.WireUserRegion?.ToXElement("WireRegion"));
bondWireGroupNode.Add(groupNode);
}
root.Add(bondWireGroupNode);
root.Save(XmlPath);
//if (bondMeasureParameter.ImageCountChannels == 1)
//{
// HOperatorSet.WriteTuple(new HTuple(1), ModelsBondDirectory + "Image_Index.tup");
//}
//else if (bondMeasureParameter.ImageCountChannels > 1)
//{
// HOperatorSet.WriteTuple(bondMeasureVerifyParameter.ImageChannelIndex + 1, ModelsBondDirectory + "Image_Index.tup");
//}
//HOperatorSet.WriteRegion(Algorithm.Region.ConcatRegion(BondVerifyUserRegions), ModelsBondDirectory + "Inspect_Regions.reg");
//HTuple bondOffsetFactor = new HTuple();
//HTuple bondOverSizeFactor = new HTuple();
//HTuple bondUnderSizeFactor = new HTuple();
//HTuple PreJudgeEnable = new HTuple();
//HTuple SegThreshGray = new HTuple();
//HTuple SegRegAreaFactor = new HTuple();
HTuple DistanceThreshold = new HTuple();
foreach (var item in bondModelUserRegions)
{
// //HOperatorSet.TupleConcat(bondOffsetFactor,item.BondMeasureVerifyParameterSet.BondOffsetFactor, out bondOffsetFactor);
// HOperatorSet.TupleConcat(bondOverSizeFactor, item.BondMeasureVerifyParameterSet.BondOverSizeFactor, out bondOverSizeFactor);
// HOperatorSet.TupleConcat(bondUnderSizeFactor, item.BondMeasureVerifyParameterSet.BondUnderSizeFactor, out bondUnderSizeFactor);
// HOperatorSet.TupleConcat(PreJudgeEnable, item.BondMeasureVerifyParameterSet.PreJudgeEnable, out PreJudgeEnable);
// HOperatorSet.TupleConcat(SegThreshGray, item.BondMeasureVerifyParameterSet.SegThreshGray, out SegThreshGray);
// HOperatorSet.TupleConcat(SegRegAreaFactor, item.BondMeasureVerifyParameterSet.SegRegAreaFactor, out SegRegAreaFactor);
HOperatorSet.TupleConcat(DistanceThreshold, item.BondMeasureModelParameter.DistanceThreshold, out DistanceThreshold);
}
//HOperatorSet.WriteTuple(bondOffsetFactor, $"{ModelsBondDirectory}BondOffsetFactor.tup");
//HOperatorSet.WriteTuple(bondOverSizeFactor, $"{ModelsBondDirectory}BondOverSizeFactor.tup");
//HOperatorSet.WriteTuple(bondUnderSizeFactor, $"{ModelsBondDirectory}BondUnderSizeFactor.tup");
//HOperatorSet.WriteTuple(PreJudgeEnable, $"{ModelsBondDirectory}PreJudgeEnable.tup");
//HOperatorSet.WriteTuple(SegThreshGray, $"{ModelsBondDirectory}SegThreshGray.tup");
//HOperatorSet.WriteTuple(SegRegAreaFactor, $"{ModelsBondDirectory}SegRegAreaFactor.tup");
HOperatorSet.WriteTuple(DistanceThreshold, $"{ModelsBondDirectory}MetrologyDistanceThreshold.tup");
}
catch (Exception ex)
{
MessageBox.Show(ex.ToString());
}
try
{
if (bondMeasureParameter.OnRecipesIndexs.Length > 0)
{
HOperatorSet.WriteTuple(bondMeasureParameter.OnRecipesIndexs[bondMeasureParameter.OnRecipesIndex], $"{ModelsBondDirectory}OnWhat.tup");
}
}
catch (Exception)//改
{
MessageBox.Show("请选择\"焊点在\"位置！");
}
try
{
if (bondMeasureModelObject.MetrologyHandle != null)
{
HOperatorSet.WriteMetrologyModel(bondMeasureModelObject.MetrologyHandle, $"{ModelsBondDirectory}" + "MetrologyHandle.mtr");
}
else if (File.Exists($"{BondMeasureDirectory}MetrologyHandle.mtr"))
{
HOperatorSet.ReadMetrologyModel($"{BondMeasureDirectory}MetrologyHandle.mtr", out HTuple metrologyHandle);
HOperatorSet.WriteMetrologyModel(metrologyHandle, $"{ModelsBondDirectory}" + "MetrologyHandle.mtr");
}
HOperatorSet.WriteTuple(Algorithm.Region.MetrologyType(bondModelUserRegions), $"{ModelsBondDirectory}MetrologyType.tup");
}
catch (Exception ex)
{
MessageBox.Show(ex.ToString(), "模板句柄保存异常！");
}
}
public override void SaveXML()
{
try
{
// 保留表面检测保存区域 0113 lw
HObject ho_Frame_Region = null;
if (File.Exists($"{ModelsRecipeDirectory}Frame_Region.reg"))
{
HOperatorSet.ReadRegion(out ho_Frame_Region, ModelsRecipeDirectory + "Frame_Region.reg");
}
HObject ho_PegRack_Region = null;
if (File.Exists($"{ModelsRecipeDirectory}PegRack_Region.reg"))
{
HOperatorSet.ReadRegion(out ho_PegRack_Region, ModelsRecipeDirectory + "PegRack_Region.reg");
}
HObject ho_Bridge_Region = null;
if (File.Exists($"{ModelsRecipeDirectory}Bridge_Region.reg"))
{
HOperatorSet.ReadRegion(out ho_Bridge_Region, ModelsRecipeDirectory + "Bridge_Region.reg");
}
//Models删除文件
Directory.GetFiles(ModelsRecipeDirectory).ToList().ForEach(File.Delete);
if (ho_Frame_Region != null)
{
HOperatorSet.WriteRegion(ho_Frame_Region, ModelsRecipeDirectory + "Frame_Region.reg");
ho_Frame_Region.Dispose();
}
if (ho_PegRack_Region != null)
{
HOperatorSet.WriteRegion(ho_PegRack_Region, ModelsRecipeDirectory + "PegRack_Region.reg");
ho_PegRack_Region.Dispose();
}
if (ho_Bridge_Region != null)
{
HOperatorSet.WriteRegion(ho_Bridge_Region, ModelsRecipeDirectory + "Bridge_Region.reg");
ho_Bridge_Region.Dispose();
}
XElement root = new XElement("Recipe");
XElement goldenModelParameterNode = new XElement("GoldenModelParameter");
XElement frameLocateInspectParameterNode = new XElement("FrameLocateParameter");
XMLHelper.AddIdentifier(root, IdentifyString);
XMLHelper.AddRegion(root, dieUserRegions, "Die_Regions");
//多框架区域保存
XElement matchRegionGroupsNode = new XElement("MatchRegionGroup");
foreach (var group in MatchRegionsGroups)
{
XElement matchRegionNode = new XElement("MatchRegion");
matchRegionNode.Add(new XAttribute("Index", group.Index.ToString()));
XMLHelper.AddRegion(matchRegionNode, group.MatchUserRegions, "Region");
matchRegionGroupsNode.Add(matchRegionNode);
}
//框架区域保存
XMLHelper.AddRegion(root, FrameUserRegions, "Frame_Region");
XMLHelper.AddParameters(goldenModelParameterNode, goldenModelParameter, IdentifyString);
XMLHelper.AddParameters(frameLocateInspectParameterNode, frameLocateInspectParameter, IdentifyString);
root.Add(goldenModelParameterNode);
root.Add(frameLocateInspectParameterNode);
root.Add(matchRegionGroupsNode);
root.Save(XmlPath);
if (goldenModelParameter.ImageCountChannels == 1)
{
HOperatorSet.WriteTuple(new HTuple(1), ModelsRecipeDirectory + "Image_Index.tup");
}
else if (goldenModelParameter.ImageCountChannels > 1)
{
//1121
HOperatorSet.WriteTuple(new HTuple(goldenModelParameter.ImageChannelIndex + 1), ModelsRecipeDirectory + "Image_Index.tup");
}
if (goldenModelParameter.ModelType == 0)
{
HOperatorSet.WriteTuple(new HTuple("ncc"), $"{ModelsRecipeDirectory}Model_Type.tup");
}
else if (goldenModelParameter.ModelType == 1)
{
HOperatorSet.WriteTuple(new HTuple("shape"), $"{ModelsRecipeDirectory}Model_Type.tup");
}
}
catch (System.Exception ex)
{
MessageBox.Show(ex.ToString());
}
//try
//{
// if (File.Exists($"{RecipeDirectory}PosModel.dat")|| goldenModelObject.PosModelID != null)
// {
// if (goldenModelObject.PosModelID != null)
// {
// Algorithm.File.SaveModel(ModelsRecipeDirectory + "PosModel.dat", goldenModelParameter.ModelType, goldenModelObject.PosModelID);
// }
// else if (File.Exists($"{RecipeDirectory}PosModel.dat"))
// {
// HTuple PosModelId = Algorithm.File.ReadModel($"{RecipeDirectory}PosModel.dat", goldenModelParameter.ModelType);
// Algorithm.File.SaveModel(ModelsRecipeDirectory + "PosModel.dat", goldenModelParameter.ModelType, PosModelId);
// }
// }
// else
// {
// MessageBox.Show("请创建定位模板！");
// }
//}
//catch (System.Exception ex)
//{
// MessageBox.Show(ex.ToString(),"保存模板错误！");
//}
try
{
HOperatorSet.WriteTuple(frameLocateInspectParameter.AngleStart, FilePath.EnsureDirectoryExisted($"{ModelsRecipeDirectory}") + "AngleStart.tup");
HOperatorSet.WriteTuple(frameLocateInspectParameter.AngleExt, FilePath.EnsureDirectoryExisted($"{ModelsRecipeDirectory}") + "AngleExt.tup");
HOperatorSet.WriteTuple(frameLocateInspectParameter.MinMatchScore, FilePath.EnsureDirectoryExisted($"{ModelsRecipeDirectory}") + "MinMatchScore.tup");
HOperatorSet.WriteTuple(frameLocateInspectParameter.MatchNum, FilePath.EnsureDirectoryExisted($"{ModelsRecipeDirectory}") + "MatchNum.tup");
//HOperatorSet.WriteRegion(Algorithm.Region.Union1Region(matchUserRegions), ModelsRecipeDirectory + "Match_Region.reg");
HOperatorSet.GenEmptyObj(out HObject matchRegions);
foreach (var item in MatchRegionsGroups)
{
// lw - 0115 每组区域应Union
HOperatorSet.ConcatObj(Algorithm.Region.Union1Region(item.MatchUserRegions.Where(r => r.IsEnable)), matchRegions, out matchRegions);
}
HOperatorSet.WriteRegion(matchRegions, ModelsRecipeDirectory + "Match_Region.reg");
matchRegions.Dispose();
if (FrameUserRegions.Count > 0)
{
HOperatorSet.WriteRegion(FrameUserRegions[0].CalculateRegion, ModelsRecipeDirectory + "FrameRegion.reg");
}
}
catch (Exception ex)
{
MessageBox.Show(ex.ToString());
}
//保存模板
string[] ModelPathArr = goldenModelParameter.PosModelIdPath.Split(',');
if (goldenModelObject.PosModelID == null && File.Exists(ModelPathArr[0]))
{
goldenModelObject.PosModelID = Algorithm.File.ReadModel(ModelPathArr, goldenModelParameter.ModelType);
}
else if (goldenModelObject.PosModelID == null)
{
MessageBox.Show("请先创建定位模板！");
return;
}
if (goldenModelObject.PosModelID.Length == 1)
{
string ModelsIDPath = $"{ModelsRecipeDirectory}PosModel.dat";
Algorithm.File.SaveModel(ModelsIDPath, goldenModelParameter.ModelType, goldenModelObject.PosModelID);
}
else if (goldenModelObject.PosModelID.Length > 1)
{
String[] ModelIdPathArry = new string[goldenModelObject.PosModelID.Length];
for (int i = 0; i < goldenModelParameter.PosModelIdPath.Split(',').Length; i++)
{
ModelIdPathArry[i] = $"{ModelsRecipeDirectory}PosModel_" + i + ".dat";
}
Algorithm.File.SaveModel(ModelIdPathArry, goldenModelParameter.ModelType, goldenModelObject.PosModelID);//
}
else
{
MessageBox.Show("请先创建模板！");
}
//try
//{
// if (($"{RecipeDirectory}PosModel.dat").Contains("PosModel"))
// {
// if (goldenModelParameter.ModelIdPath.Split(',').Length == 1 && goldenModelParameter.ModelIdPath != "")
// {
// if (File.Exists($"{RecipeDirectory}PosModel.dat") || goldenModelObject.PosModelID != null)
// {
// if (goldenModelObject.PosModelID != null)
// {
// Algorithm.File.SaveModel(ModelsRecipeDirectory + "PosModel.dat", goldenModelParameter.ModelType, goldenModelObject.PosModelID);
// }
// else if (File.Exists($"{RecipeDirectory}PosModel.dat"))
// {
// HTuple PosModelId = Algorithm.File.ReadModel($"{RecipeDirectory}PosModel.dat", goldenModelParameter.ModelType);
// Algorithm.File.SaveModel(ModelsRecipeDirectory + "PosModel.dat", goldenModelParameter.ModelType, PosModelId);
// }
// }
// else
// {
// MessageBox.Show("请创建定位模板！");
// }
// }
// else
// {
// if (goldenModelObject.PosModelID != null)
// {
// String[] ModelIdPathArry = new string[goldenModelObject.PosModelID.TupleLength()];
// for (int i = 0; i < goldenModelObject.PosModelID.TupleLength(); i++)
// {
// ModelIdPathArry[i] = $"{ModelsRecipeDirectory}PosModel_" + i + ".dat";
// }
// goldenModelParameter.ModelIdPath = String.Join(",", ModelIdPathArry);
// Algorithm.File.SaveModel(ModelIdPathArry, goldenModelParameter.ModelType, goldenModelObject.PosModelID);
// }
// else if (File.Exists($"{RecipeDirectory}PosModel.dat"))
// {
// HTuple ModelId = Algorithm.File.ReadModel($"{RecipeDirectory}PosModel.dat".Split(','), goldenModelParameter.ModelType);
// String[] ModelIdPathArry = new string[ModelId.TupleLength()];
// for (int i = 0; i < ModelId.TupleLength(); i++)
// {
// ModelIdPathArry[i] = $"{ModelsRecipeDirectory}PosModel_" + i + ".dat";
// }
// Algorithm.File.SaveModel(ModelIdPathArry, goldenModelParameter.ModelType, ModelId);
// }
// }
// }
//}
//catch (System.Exception ex)
//{
// MessageBox.Show(ex.ToString());
//}
}