/// <summary>
/// Process the read/write queues of the specified pipe.
/// </summary>
/// <param name="pipe">The pipe to process.</param>
/// <param name="OutProcess">The process which owns the pipe's outpoint.</param>
/// <param name="InProcess">The process which owns the pipe's inpoint.</param>
private static void ProcessPipeQueue(Pipe pipe, Process OutProcess, Process InProcess)
{
#if PIPES_TRACE
BasicConsole.WriteLine("ProcessPipeQueue: Checking first loop condition");
#endif
while ((pipe.AreThreadsWaitingToWrite() && pipe.CanWrite()) || (pipe.AreThreadsWaitingToRead() && pipe.CanRead()))
{
#if PIPES_TRACE
BasicConsole.WriteLine("ProcessPipeQueue: Loop start");
#endif
if (pipe.AreThreadsWaitingToWrite() && pipe.CanWrite())
{
#if PIPES_TRACE
BasicConsole.WriteLine("ProcessPipeQueue: Pipe can write");
#endif
/* - Dequeue thread to write
* - Find thread to write
* - Load pointer to request structure from thread's stack
* - Write pipe
* - Setup return values for thread
* - Wake thread
* - Loop back
*/
#if PIPES_TRACE
BasicConsole.WriteLine("ProcessPipeQueue: Dequeuing out thread id");
#endif
UInt32 ThreadId;
if (!pipe.DequeueToWrite(out ThreadId))
{
break;
}
#if PIPES_TRACE
BasicConsole.WriteLine("ProcessPipeQueue: Getting out thread");
#endif
Thread WriteThread = ProcessManager.GetThreadById(ThreadId, OutProcess);
if (WriteThread == null)
{
break;
}
#if PIPES_TRACE
BasicConsole.WriteLine("ProcessPipeQueue: Writing pipe");
#endif
WritePipeRequest* Request = (WritePipeRequest*)WriteThread.Param1;
bool Successful = pipe.Write(Request->InBuffer, Request->Offset, Request->Length);
if (Successful)
{
#if PIPES_TRACE
BasicConsole.WriteLine("ProcessPipeQueue: Write successful");
#endif
WriteThread.Return1 = (uint)SystemCallResults.OK;
WriteThread._Wake();
}
else
{
#if PIPES_TRACE
BasicConsole.WriteLine("ProcessPipeQueue: Write failed");
#endif
WriteThread.Return1 = (uint)SystemCallResults.Fail;
WriteThread._Wake();
}
}
else if (pipe.AreThreadsWaitingToRead() && pipe.CanRead())
{
#if PIPES_TRACE
BasicConsole.WriteLine("ProcessPipeQueue: Pipe can read");
#endif
/* - Dequeue thread to read
* - Find thread to read
* - Load pointer to request structure from thread's stack
* - Read pipe
* - Setup return values for thread
* - Wake thread
* - Loop back
*/
#if PIPES_TRACE
BasicConsole.WriteLine("ProcessPipeQueue: Dequeuing in thread id");
#endif
UInt32 ThreadId;
if (!pipe.DequeueToRead(out ThreadId))
{
break;
}
#if PIPES_TRACE
BasicConsole.WriteLine("ProcessPipeQueue: Getting in thread");
#endif
Thread ReadThread = ProcessManager.GetThreadById(ThreadId, InProcess);
if (ReadThread == null)
{
break;
}
#if PIPES_TRACE
BasicConsole.WriteLine("ProcessPipeQueue: Reading pipe");
#endif
ReadPipeRequest* Request = (ReadPipeRequest*)ReadThread.Param1;
int BytesRead;
bool Successful = pipe.Read(Request->OutBuffer, Request->Offset, Request->Length, out BytesRead);
if (Successful)
{
#if PIPES_TRACE
BasicConsole.WriteLine("ProcessPipeQueue: Read successful");
#endif
ReadThread.Return1 = (uint)SystemCallResults.OK;
ReadThread.Return2 = (uint)BytesRead;
ReadThread._Wake();
}
else
{
#if PIPES_TRACE
BasicConsole.WriteLine("ProcessPipeQueue: Read failed");
#endif
ReadThread.Return1 = (uint)SystemCallResults.Fail;
ReadThread._Wake();
}
}
#if PIPES_TRACE
BasicConsole.WriteLine("ProcessPipeQueue: Looping...");
#endif
}
}
/// <summary>
/// Process the read/write queues of the specified pipe.
/// </summary>
/// <param name="pipe">The pipe to process.</param>
/// <param name="OutProcess">The process which owns the pipe's outpoint.</param>
/// <param name="InProcess">The process which owns the pipe's inpoint.</param>
private static void ProcessPipeQueue(Pipe pipe, Process OutProcess, Process InProcess)
{
#if PIPES_TRACE
BasicConsole.WriteLine("ProcessPipeQueue: Checking first loop condition");
#endif
while ((pipe.AreThreadsWaitingToWrite() && pipe.CanWrite()) || (pipe.AreThreadsWaitingToRead() && pipe.CanRead()))
{
#if PIPES_TRACE
BasicConsole.WriteLine("ProcessPipeQueue: Loop start");
#endif
if (pipe.AreThreadsWaitingToWrite() && pipe.CanWrite())
{
#if PIPES_TRACE
BasicConsole.WriteLine("ProcessPipeQueue: Pipe can write");
#endif
/* - Dequeue thread to write
* - Find thread to write
* - Load pointer to request structure from thread's stack
* - Write pipe
* - Setup return values for thread
* - Wake thread
* - Loop back
*/
#if PIPES_TRACE
BasicConsole.WriteLine("ProcessPipeQueue: Dequeuing out thread id");
#endif
UInt32 ThreadId;
if (!pipe.DequeueToWrite(out ThreadId))
{
break;
}
#if PIPES_TRACE
BasicConsole.WriteLine("ProcessPipeQueue: Getting out thread");
#endif
Thread WriteThread = ProcessManager.GetThreadById(ThreadId, OutProcess);
if (WriteThread == null)
{
break;
}
#if PIPES_TRACE
BasicConsole.WriteLine("ProcessPipeQueue: Writing pipe");
#endif
ProcessManager.EnableKernelAccessToProcessMemory(OutProcess);
WritePipeRequest *Request = (WritePipeRequest *)WriteThread.Param1;
bool Successful = pipe.Write(Request->InBuffer, Request->Offset, Request->Length);
if (Successful)
{
#if PIPES_TRACE
BasicConsole.WriteLine("ProcessPipeQueue: Write successful");
#endif
WriteThread.Return1 = (uint)SystemCallResults.OK;
}
else
{
#if PIPES_TRACE
BasicConsole.WriteLine("ProcessPipeQueue: Write failed");
#endif
WriteThread.Return1 = (uint)SystemCallResults.Fail;
}
ProcessManager.DisableKernelAccessToProcessMemory(OutProcess);
WriteThread._Wake();
}
else if (pipe.AreThreadsWaitingToRead() && pipe.CanRead())
{
#if PIPES_TRACE
BasicConsole.WriteLine("ProcessPipeQueue: Pipe can read");
#endif
/* - Dequeue thread to read
* - Find thread to read
* - Load pointer to request structure from thread's stack
* - Read pipe
* - Setup return values for thread
* - Wake thread
* - Loop back
*/
#if PIPES_TRACE
BasicConsole.WriteLine("ProcessPipeQueue: Dequeuing in thread id");
#endif
UInt32 ThreadId;
if (!pipe.DequeueToRead(out ThreadId))
{
break;
}
#if PIPES_TRACE
BasicConsole.WriteLine("ProcessPipeQueue: Getting in thread");
#endif
Thread ReadThread = ProcessManager.GetThreadById(ThreadId, InProcess);
if (ReadThread == null)
{
break;
}
#if PIPES_TRACE
BasicConsole.WriteLine("ProcessPipeQueue: Reading pipe");
#endif
ProcessManager.EnableKernelAccessToProcessMemory(InProcess);
ReadPipeRequest *Request = (ReadPipeRequest *)ReadThread.Param1;
int BytesRead;
bool Successful = pipe.Read(Request->OutBuffer, Request->Offset, Request->Length, out BytesRead);
if (Successful)
{
#if PIPES_TRACE
BasicConsole.WriteLine("ProcessPipeQueue: Read successful");
#endif
ReadThread.Return1 = (uint)SystemCallResults.OK;
ReadThread.Return2 = (uint)BytesRead;
}
else
{
#if PIPES_TRACE
BasicConsole.WriteLine("ProcessPipeQueue: Read failed");
#endif
ReadThread.Return1 = (uint)SystemCallResults.Fail;
}
ProcessManager.DisableKernelAccessToProcessMemory(InProcess);
ReadThread._Wake();
}
#if PIPES_TRACE
BasicConsole.WriteLine("ProcessPipeQueue: Looping...");
#endif
}
}
/// <summary>
/// Attempts to read from the specified pipe.
/// </summary>
/// <remarks>
/// Note that this function is non-blocking. It will, however, block a system caller thread by simply not returning it from
/// the deferred system call.
/// </remarks>
/// <param name="PipeId">The Id of the pipe to read.</param>
/// <param name="Blocking">Whether the read should be blocking or non-blocking.</param>
/// <param name="CallerProcess">The process which made the call.</param>
/// <param name="CallerThread">The thread which made the call.</param>
/// <returns>See descriptions on <see cref="PipeManager.RWResults"/> values.</returns>
public static RWResults ReadPipe(int PipeId, bool Blocking, Process CallerProcess, Thread CallerThread)
{
#if PIPES_TRACE
BasicConsole.WriteLine("ReadPipe: Validating inputs");
#endif
// Validate inputs
// - Check pipe exists
Pipe pipe = GetPipe(PipeId);
if (pipe == null)
{
return(RWResults.Error);
}
#if PIPES_TRACE
BasicConsole.WriteLine("ReadPipe: Checking caller allowed to write");
#endif
// Check the caller is allowed to access the pipe
if (!AllowedToReadPipe(pipe, CallerProcess.Id))
{
return(RWResults.Error);
}
#if PIPES_TRACE
BasicConsole.WriteLine("ReadPipe: Getting out process");
#endif
// Get outpoint process
Process OutProcess = ProcessManager.GetProcessById(pipe.Outpoint.ProcessId);
if (OutProcess == null)
{
return(RWResults.Error);
}
#if PIPES_TRACE
BasicConsole.WriteLine("ReadPipe: Getting in process");
#endif
// Get inpoint process
Process InProcess = ProcessManager.GetProcessById(pipe.Inpoint.ProcessId);
if (InProcess == null)
{
return(RWResults.Error);
}
#if PIPES_TRACE
BasicConsole.WriteLine("ReadPipe: Adding caller to read queue");
#endif
// Add caller thread to the read queue
pipe.QueueToRead(CallerThread.Id);
ProcessManager.EnableKernelAccessToProcessMemory(CallerProcess);
// Set up initial failure return value
CallerThread.Return1 = (uint)SystemCallResults.Fail;
ProcessManager.DisableKernelAccessToProcessMemory(CallerProcess);
#if PIPES_TRACE
BasicConsole.WriteLine("ReadPipe: Processing pipe queue");
#endif
// Process the pipe queue
ProcessPipeQueue(pipe, OutProcess, InProcess);
bool Completed = !pipe.AreThreadsWaitingToRead();
if (!Blocking)
{
if (!Completed)
{
uint temp;
bool removed = pipe.RemoveLastToRead(out temp);
if (!removed || temp != CallerThread.Id)
{
BasicConsole.WriteLine("PipeManager: Error! Async read failed and then removing last from queue resulted in thread Id mismatch!");
}
ProcessManager.EnableKernelAccessToProcessMemory(CallerProcess);
CallerThread.Return1 = (uint)SystemCallResults.Fail;
ProcessManager.DisableKernelAccessToProcessMemory(CallerProcess);
CallerThread._Wake();
}
}
return(Completed ? RWResults.Complete : RWResults.Queued);
}