// ## Flip ##
// This is a handler for the Flip event. It is triggered when the player
// turns a cube face down or face up. The `newOrientationIsUp` argument
// tells you which way the cube is now facing.
//
// Note that when a Flip event is triggered, a Tilt event is also
// triggered.
private void OnFlip(Cube cube, bool newOrientationIsUp)
{
if (newOrientationIsUp)
{
CubeWrapper wrappercube = (CubeWrapper)cube.userData;
if (wrappercube.mNumber > 1 && wrappercube.mNumber < 6)
{
if (wrappercube.mOtherstate < 3)
{
wrappercube.mOtherstate = +1;
}
wrappercube.mOtherstate = 0;
}
Log.Debug("Flip face up");
mScale = 1;
mNeedDraw = true;
//osc1.sendMsg("/vcs",3145733,50f);
}
else
{
Log.Debug("Flip face down");
mScale = 2;
mNeedDraw = true;
//osc1.sendMsg("/vcs",3145733,50f);
}
}
/*
* // ## Neighbor Add ##
* // This method is a handler for the NeighborAdd event. It is triggered when
* // two cubes are placed side by side.
* //
* // Cube1 and cube2 are the two cubes that are involved in this neighboring.
* // The two cube arguments can be in any order; if your logic depends on
* // cubes being in specific positions or roles, you need to add logic to
* // this handler to sort the two cubes out.
* //
* // Side1 and side2 are the sides that the cubes neighbored on.
* private void OnNeighborAdd (Cube cube1, Cube.Side side1, Cube cube2, Cube.Side side2)
* {
* CubeWrapper wrapper1 = (CubeWrapper)cube1.userData;
* CubeWrapper wrapper2 = (CubeWrapper)cube2.userData;
* Log.Debug ("Neighbor add: {0}.{1} <-> {2}.{3}", wrapper1.mNumber, side1, wrapper2.mNumber, side2);
*
* if (wrapper2.mNumber < wrapper1.mNumber) {
* CubeWrapper wrapper3 = cube1.userData;
* wrapper2 = wrapper1;
* wrapper1 = wrapper3;
* }
*
*
*
* //s'arranger pour savoir quel cube est le premier, celui qui a le plus petit nombre, devient wrapper1
* if (cube1 == SOURCE) {
* switch (cube2){
* case FILTER:
* break;
* }
*
*
* }
*
*
* if (wrapper1.mNumber == 1) {
* if (wrapper2.mNumber == 2) {
*
* }
* }
*
* if (wrapper1.mNumber== 2) {
* if (wrapper2.mNumber == 3) {
* cube2.Image("all",0,0,0,ALL_LFO,Cube.SCREEN_WIDTH,Cube.SCREEN_HEIGHT,0,0);
* }
* }
*
* cube1.Paint();
* cube2.Paint();
* /*
* CubeWrapper wrapper = (CubeWrapper)cube1.userData;
* if (wrapper != null) {
* // Here we set our wrapper's rotation value so that the image gets
* // drawn with its top side pointing towards the neighbor cube.
* //
* // Cube.Side is an enumeration (TOP, LEFT, BOTTOM, RIGHT, NONE). The
* // values of the enumeration can be cast to integers by counting
* // counterclockwise:
* //
* // * TOP = 0
* // * LEFT = 1
* // * BOTTOM = 2
* // * RIGHT = 3
* // * NONE = 4
* wrapper.mRotation = (int)side1;
* wrapper.mNeedDraw = true;
* }
*
* wrapper = (CubeWrapper)cube2.userData;
* if (wrapper != null) {
* wrapper.mRotation = (int)side2;
* wrapper.mNeedDraw = true;
*
* }
*
* // ## Neighbor Remove ##
* // This method is a handler for the NeighborRemove event. It is triggered
* // when two cubes that were neighbored are separated.
* //
* // The side arguments for this event are the sides that the cubes
* // _were_ neighbored on before they were separated. If you check the
* // current state of their neighbors on those sides, they should of course
* // be NONE.
* private void OnNeighborRemove (Cube cube1, Cube.Side side1, Cube cube2, Cube.Side side2)
* {
* CubeWrapper wrapper1 = (CubeWrapper)cube1.userData;
* CubeWrapper wrapper2 = (CubeWrapper)cube2.userData;
*
* if (wrapper2.mNumber < wrapper1.mNumber) {
* CubeWrapper wrapper3 = cube1.userData;
* wrapper2 = wrapper1;
* wrapper1 = wrapper3;
* }
* Log.Debug ("Neighbor remove: {0}.{1} <-> {2}.{3}", wrapper1.mNumber, side1, wrapper2.mNumber, side2);
*
* if (cube1 == SOURCE) {
* switch (cube2){
* case FILTER:
* break;
* }
*
*
* }
*
*
* if (wrapper1.mNumber == 1) {
* if (wrapper2.mNumber == 2) {
* cube2.Image("all",0,0,0,ALL_FILTERBASIC,Cube.SCREEN_WIDTH,Cube.SCREEN_HEIGHT,0,0);
* cube1.Image("all",0,0,0,ALL_SOURCE,Cube.SCREEN_WIDTH,Cube.SCREEN_HEIGHT,0,0);
* //message OSC, son de base
* }
* }
*
* if (wrapper1.mNumber == 2) {
* if (wrapper2.mNumber == 3) {
* cube2.Image("all",0,0,0,ALL_LFOBASIC,Cube.SCREEN_WIDTH,Cube.SCREEN_HEIGHT,0,0);
* // message OSC, son filtré simplement
* //savoir si on sait faire un "ctrl+z" sur KYMA, alors on reprend juste le son précédent
* //si pas -> switch
* }
* }
*
* cube1.Paint();
* cube2.Paint();
*
* /* CubeWrapper wrapper = (CubeWrapper)cube1.userData;
* if (wrapper != null) {
* wrapper.mScale = 1;
* wrapper.mRotation = 0;
* wrapper.mNeedDraw = true;
* }
*
* wrapper = (CubeWrapper)cube2.userData;
* if (wrapper != null) {
* wrapper.mScale = 1;
* wrapper.mRotation = 0;
* wrapper.mNeedDraw = true;
* }
* }
*/
private void OnNeighborAdd(Cube cube1, Cube.Side side1, Cube cube2, Cube.Side side2)
{
CubeWrapper wrapper1 = (CubeWrapper)cube1.userData;
CubeWrapper wrapper2 = (CubeWrapper)cube2.userData;
if (wrapper2.mNumber < wrapper1.mNumber)
{
CubeWrapper wrapper3 = (CubeWrapper)cube2.userData;
wrapper2 = wrapper1;
wrapper1 = wrapper3;
Cube cuby;
cuby = cube2;
cube2 = cube1;
cube1 = cuby;
}
Cube[] connected = CubeHelper.FindConnected(cube1);
foreach (Cube cuby in connected)
{
Log.Debug("connected {0}", connected);
}
if (connected.Length > 1)
{
foreach (Cube cubelook in connected)
{
CubeWrapper wrapper4 = (CubeWrapper)cubelook.userData;
if (wrapper4.mNumber == 1)
{
wrapper2.mIsconnected = true;
wrapper2.mHaschanged = true;
mNeedCheck = true;
Log.Debug("on a bien changé le connected");
}
}
}
mNeedCheck = true;
}
// ## Button ##
// This is a handler for the Button event. It is triggered when a cube's
// face button is either pressed or released. The `pressed` argument
// is true when you press down and false when you release.
private void OnButton(Cube cube, bool pressed)
{
if (pressed)
{
CubeWrapper wrappercube = (CubeWrapper)cube.userData;
wrappercube.mHaschanged = true;
//Log.Debug("click on the button to change the state {0}", wrappercube.mNumber);
switch (wrappercube.mNumber)
{
case 1:
if (wrappercube.mState < 3)
{
wrappercube.mState = wrappercube.mState + 1;
// Log.Debug("on a l'état {0}",wrappercube.mState);
}
else
{
wrappercube.mState = 0;
}
break;
case 2:
if (wrappercube.mState < 1)
{
wrappercube.mState = wrappercube.mState + 1;
Log.Debug("etat du hp {0}", wrappercube.mState);
}
else
{
wrappercube.mState = 0;
}
break;
case 3:
if (wrappercube.mState < 2)
{
wrappercube.mState = wrappercube.mState + 1;
}
else
{
wrappercube.mState = 0;
}
break;
case 4:
if (wrappercube.mState < 2)
{
wrappercube.mState = wrappercube.mState + 1;
}
else
{
wrappercube.mState = 0;
}
break;
case 5:
if (wrappercube.mState < 1)
{
wrappercube.mState = +1;
}
else
{
wrappercube.mState = 0;
}
break;
}
KYMA_SIFTEO.mNeedCheck = true;
}
}
/*
* public readonly int SOURCEON = 1;
* public readonly int SOURCEOFF = 0;
* public readonly int LSOFF = 0;
* public readonly int LSON = 1;
* public readonly int LFOOFF = 0;
* public readonly int LFOON = 1;
* public readonly int FILTEROFF = 0;
* public readonly int FILTERLOWPASS = 1;
* public readonly int FILTERHIGHPASS = 2;
* public readonly int EFFET = 0;
* public readonly int DELAY = 1;
*
*
* public int SOURCE = 0;
* public int LS = 0;
* public int FILTER = 0;
* public int LFO = 0;
* public int SPECIAL = 0;
*/
// Here we initialize our app.
public override void Setup()
{
// Load up the list of images.
// mImageNames = LoadImageIndex();
int number = 1;
int state = 0;
int otherstate = 0;
int j = 0;
bool isconnedted = false;
bool haschanged = false;
WithdrawSound();
// Loop through all the cubes and set them up.
foreach (Cube cube in CubeSet)
{
Cubes[j] = cube;
// Create a wrapper object for each cube. The wrapper object allows us
// to bundle a cube with extra information and behavior.
CubeWrapper wrapper = new CubeWrapper(this, cube, number, state, otherstate, isconnedted, haschanged);
mWrappers.Add(wrapper);
cube.FillRect(new Color(0, 0, 255), 0, 0, Cube.SCREEN_WIDTH, Cube.SCREEN_HEIGHT);
switch (wrapper.mNumber)
{
case 1:
cube.Image("FULL", 0, 0, 0, FULL_SOURCE1, Cube.SCREEN_WIDTH, Cube.SCREEN_HEIGHT, 0, 0);
break;
case 2:
cube.Image("FULL", 0, 0, 0, FULL_LSOFF, Cube.SCREEN_WIDTH, Cube.SCREEN_HEIGHT, 0, 0);
break;
case 3:
cube.Image("FULL", 0, 0, 0, FULL_FILTER, Cube.SCREEN_WIDTH, Cube.SCREEN_HEIGHT, 0, 0);
break;
case 4:
cube.Image("FULL", 0, 0, 0, FULL_LFO1, Cube.SCREEN_WIDTH, Cube.SCREEN_HEIGHT, 0, 0);
break;
case 5:
cube.Image("FULL", 0, 0, 0, FULL_SPECIAL, Cube.SCREEN_WIDTH, Cube.SCREEN_HEIGHT, 0, 0);
break;
}
cube.Paint();
number++;
j++;
//wrapper.DrawSlide();
}
// ## Event Handlers ##
// Objects in the Sifteo API (particularly BaseApp, CubeSet, and Cube)
// fire events to notify an app of various happenings, including actions
// that the player performs on the cubes.
//
// To listen for an event, just add the handler method to the event. The
// handler method must have the correct signature to be added. Refer to
// the API documentation or look at the examples below to get a sense of
// the correct signatures for various events.
//
// **NeighborAddEvent** and **NeighborRemoveEvent** are triggered when
// the player puts two cubes together or separates two neighbored cubes.
// These events are fired by CubeSet instead of Cube because they involve
// interaction between two Cube objects. (There are Cube-level neighbor
// events as well, which comes in handy in certain situations, but most
// of the time you will find the CubeSet-level events to be more useful.)
CubeSet.NeighborAddEvent += OnNeighborAdd;
CubeSet.NeighborRemoveEvent += OnNeighborRemove;
}
private void OnNeighborRemove(Cube cube1, Cube.Side side1, Cube cube2, Cube.Side side2)
{
bool sourceishere = false;
bool sourceishere2 = false;
//the "remove part" is a little bit more tricky because we have to check which part stays with the source
/*
* CubeWrapper wrapper1 = (CubeWrapper)cube1.userData;
* CubeWrapper wrapper2 = (CubeWrapper)cube2.userData;
*
* if (wrapper2.mNumber < wrapper1.mNumber)
* {
* CubeWrapper wrapper3 = (CubeWrapper)cube2.userData;
* wrapper2 = wrapper1;
* wrapper1 = wrapper3;
*
* Cube cuby = Cube;
* cuby = cube2;
* cube2 = cube1;
* cube1 = cuby;
* }
*/
Cube[] connected = CubeHelper.FindConnected(cube1);
Cube[] connected2 = CubeHelper.FindConnected(cube2);
foreach (Cube cubelook4 in connected)
{
CubeWrapper wrapper4 = (CubeWrapper)cubelook4.userData;
if (wrapper4.mNumber == 1)
{ //we check if the source is in this part, and if it is the case, everycube in the group is connected
sourceishere = true;
}
}
foreach (Cube cubelook2 in connected2)
{
CubeWrapper wrapper4 = (CubeWrapper)cubelook2.userData;
if (wrapper4.mNumber == 1)
{ //we check if the source is in this part, and if it is the case, everycube in the group is connected
sourceishere2 = true;
}
}
if (sourceishere)
{
foreach (Cube cubelook3 in connected)
{
CubeWrapper wrapper5 = (CubeWrapper)cubelook3.userData;
wrapper5.mIsconnected = true; //if it is not the case, they are not connected
wrapper5.mHaschanged = true;
}
foreach (Cube cubelook3 in connected2)
{
CubeWrapper wrapper5 = (CubeWrapper)cubelook3.userData;
wrapper5.mIsconnected = false; //if it is not the case, they are not connected
wrapper5.mHaschanged = true;
}
}
if (sourceishere2)
{
foreach (Cube cubelook3 in connected2)
{
CubeWrapper wrapper5 = (CubeWrapper)cubelook3.userData;
wrapper5.mIsconnected = true; //if it is not the case, they are not connected
wrapper5.mHaschanged = true;
}
foreach (Cube cubelook3 in connected)
{
CubeWrapper wrapper5 = (CubeWrapper)cubelook3.userData;
wrapper5.mIsconnected = false; //if it is not the case, they are not connected
wrapper5.mHaschanged = true;
}
}
/*foreach (Cube cubelook2 in connected2)
* {
* CubeWrapper wrapper4 = (CubeWrapper)cubelook2.userData;
*
* if (wrapper4.mNumber == 1)
* { //we check if the source is in this part, and if it is the case, everycube in the group is connected
* foreach (Cube cubelook3 in connected2)
* {
* CubeWrapper wrapper5 = (CubeWrapper)cubelook3.userData;
* wrapper5.mIsconnected = true;
* sourceishere = true;
* }
* }
* }*/
mNeedCheck = true;
}