/// <summary>
/// constructs from file
/// </summary>
/// <param name="path">file name</param>
/// <param name="passphrase">passphrase or empty string if passphrase is not required</param>
public SSH1UserAuthKey(string path, string passphrase)
{
#if PODEROSA_KEYFORMAT
PrivateKeyLoader loader = new PrivateKeyLoader(path);
loader.LoadSSH1PrivateKey(
passphrase,
out _modulus,
out _publicExponent,
out _privateExponent,
out _primeP,
out _primeQ,
out _crtCoefficient,
out _comment);
#else
Stream s = File.Open(path, FileMode.Open);
byte[] header = new byte[32];
s.Read(header, 0, header.Length);
if (Encoding.ASCII.GetString(header) != "SSH PRIVATE KEY FILE FORMAT 1.1\n")
throw new SSHException(String.Format(Strings.GetString("BrokenKeyFile"), path));
SSH1DataReader reader = new SSH1DataReader(ReadAll(s));
s.Close();
byte[] cipher = reader.Read(2); //first 2 bytes indicates algorithm and next 8 bytes is space
reader.Read(8);
_modulus = reader.ReadMPInt();
_publicExponent = reader.ReadMPInt();
_comment = reader.ReadString();
byte[] prvt = reader.GetRemainingDataView().GetBytes();
//必要なら復号
CipherAlgorithm algo = (CipherAlgorithm)cipher[1];
if (algo != 0) {
Cipher c = CipherFactory.CreateCipher(SSHProtocol.SSH1, algo, ConvertToKey(passphrase));
byte[] buf = new byte[prvt.Length];
c.Decrypt(prvt, 0, prvt.Length, buf, 0);
prvt = buf;
}
SSH1DataReader prvtreader = new SSH1DataReader(prvt);
byte[] mark = prvtreader.Read(4);
if (mark[0] != mark[2] || mark[1] != mark[3])
throw new SSHException(Strings.GetString("WrongPassphrase"));
_privateExponent = prvtreader.ReadMPInt();
_crtCoefficient = prvtreader.ReadMPInt();
_primeP = prvtreader.ReadMPInt();
_primeQ = prvtreader.ReadMPInt();
#endif
}
internal void AsyncReceivePacket(DataFragment data)
{
try {
SSH1DataReader re = new SSH1DataReader(data);
SSH1PacketType pt = (SSH1PacketType)re.ReadByte();
switch (pt) {
case SSH1PacketType.SSH_SMSG_STDOUT_DATA: {
int len = re.ReadInt32();
DataFragment frag = re.GetRemainingDataView(len);
_channel_collection.FindChannelEntry(_shellID).Receiver.OnData(frag.Data, frag.Offset, frag.Length);
}
break;
case SSH1PacketType.SSH_SMSG_STDERR_DATA: {
_channel_collection.FindChannelEntry(_shellID).Receiver.OnExtendedData((int)SSH1PacketType.SSH_SMSG_STDERR_DATA, re.ReadByteString());
}
break;
case SSH1PacketType.SSH_MSG_CHANNEL_DATA: {
int channel = re.ReadInt32();
int len = re.ReadInt32();
DataFragment frag = re.GetRemainingDataView(len);
_channel_collection.FindChannelEntry(channel).Receiver.OnData(frag.Data, frag.Offset, frag.Length);
}
break;
case SSH1PacketType.SSH_MSG_PORT_OPEN:
ProcessPortforwardingRequest(_eventReceiver, re);
break;
case SSH1PacketType.SSH_MSG_CHANNEL_CLOSE: {
int channel = re.ReadInt32();
ISSHChannelEventReceiver r = _channel_collection.FindChannelEntry(channel).Receiver;
_channel_collection.UnregisterChannelEventReceiver(channel);
r.OnChannelClosed();
}
break;
case SSH1PacketType.SSH_MSG_CHANNEL_CLOSE_CONFIRMATION: {
int channel = re.ReadInt32();
}
break;
case SSH1PacketType.SSH_MSG_DISCONNECT:
_eventReceiver.OnConnectionClosed();
break;
case SSH1PacketType.SSH_SMSG_EXITSTATUS:
_channel_collection.FindChannelEntry(_shellID).Receiver.OnChannelClosed();
break;
case SSH1PacketType.SSH_MSG_DEBUG:
_eventReceiver.OnDebugMessage(false, re.ReadByteString());
break;
case SSH1PacketType.SSH_MSG_IGNORE:
_eventReceiver.OnIgnoreMessage(re.ReadByteString());
break;
case SSH1PacketType.SSH_MSG_CHANNEL_OPEN_CONFIRMATION: {
int local = re.ReadInt32();
int remote = re.ReadInt32();
_channel_collection.FindChannelEntry(local).Receiver.OnChannelReady();
}
break;
case SSH1PacketType.SSH_SMSG_SUCCESS:
if (_executingShell) {
ExecShell();
_channel_collection.FindChannelEntry(_shellID).Receiver.OnChannelReady();
_executingShell = false;
}
break;
default:
_eventReceiver.OnUnknownMessage((byte)pt, data.GetBytes());
break;
}
}
catch (Exception ex) {
_eventReceiver.OnError(ex);
}
}
/// <summary>
/// Read SSH1 private key parameters.
/// </summary>
/// <param name="passphrase">passphrase for decrypt the key file</param>
/// <param name="modulus">private key parameter</param>
/// <param name="publicExponent">private key parameter</param>
/// <param name="privateExponent">private key parameter</param>
/// <param name="primeP">private key parameter</param>
/// <param name="primeQ">private key parameter</param>
/// <param name="crtCoefficient">private key parameter</param>
/// <param name="comment">comment</param>
/// <exception cref="SSHException">failed to parse</exception>
public void Load(
string passphrase,
out BigInteger modulus,
out BigInteger publicExponent,
out BigInteger privateExponent,
out BigInteger primeP,
out BigInteger primeQ,
out BigInteger crtCoefficient,
out string comment)
{
if (keyFile == null)
throw new SSHException("A key file is not loaded yet");
byte[] hdr = Encoding.ASCII.GetBytes(PrivateKeyFileHeader.SSH1_HEADER);
if (!ByteArrayUtil.ByteArrayStartsWith(keyFile, hdr))
throw new SSHException(Strings.GetString("NotValidPrivateKeyFile"));
SSH1DataReader reader = new SSH1DataReader(keyFile);
reader.Read(hdr.Length);
byte[] cipher = reader.Read(2); //first 2 bytes indicates algorithm and next 8 bytes is space
reader.Read(8);
modulus = reader.ReadMPInt();
publicExponent = reader.ReadMPInt();
comment = reader.ReadString();
byte[] prvt = reader.GetRemainingDataView().GetBytes();
//必要なら復号
CipherAlgorithm algo = (CipherAlgorithm)cipher[1];
if (algo != 0) {
Cipher c = CipherFactory.CreateCipher(SSHProtocol.SSH1, algo, SSH1PassphraseToKey(passphrase));
c.Decrypt(prvt, 0, prvt.Length, prvt, 0);
}
SSH1DataReader prvtreader = new SSH1DataReader(prvt);
byte[] mark = prvtreader.Read(4);
if (mark[0] != mark[2] || mark[1] != mark[3])
throw new SSHException(Strings.GetString("WrongPassphrase"));
privateExponent = prvtreader.ReadMPInt();
crtCoefficient = prvtreader.ReadMPInt();
primeP = prvtreader.ReadMPInt();
primeQ = prvtreader.ReadMPInt();
}
/// <summary>
/// Process packet about this channel.
/// </summary>
/// <param name="packetType">a packet type (message number)</param>
/// <param name="packetFragment">a packet image except message number and recipient channel.</param>
public override void ProcessPacket(SSH1PacketType packetType, DataFragment packetFragment)
{
if (_state == State.Closed) {
return; // ignore
}
DataFragment dataFragmentArg;
lock (_stateSync) {
switch (_state) {
case State.Initial:
break;
case State.WaitStartPTYResponse:
if (packetType == SSH1PacketType.SSH_SMSG_SUCCESS) {
_state = State.StartPTYSuccess;
Monitor.PulseAll(_stateSync); // notifies state change
_receivedPacket.TrySet(packetFragment, PASSING_TIMEOUT);
}
else if (packetType == SSH1PacketType.SSH_SMSG_FAILURE) {
_state = State.StartPTYFailure;
Monitor.PulseAll(_stateSync); // notifies state change
_receivedPacket.TrySet(packetFragment, PASSING_TIMEOUT);
}
break;
case State.Established:
break;
case State.Ready:
switch (packetType) {
case SSH1PacketType.SSH_SMSG_STDOUT_DATA: {
SSH1DataReader reader = new SSH1DataReader(packetFragment);
int len = reader.ReadInt32();
dataFragmentArg = reader.GetRemainingDataView(len);
}
goto OnData; // do it out of the lock block
case SSH1PacketType.SSH_SMSG_STDERR_DATA: {
SSH1DataReader reader = new SSH1DataReader(packetFragment);
int len = reader.ReadInt32();
dataFragmentArg = reader.GetRemainingDataView(len);
}
goto OnData; // do it out of the lock block
case SSH1PacketType.SSH_SMSG_EXITSTATUS:
Transmit(
new SSH1Packet(SSH1PacketType.SSH_CMSG_EXIT_CONFIRMATION)
);
goto SetStateClosedByServer; // do it out of the lock block
}
goto OnUnhandledPacket; // do it out of the lock block
}
}
return;
OnData:
Handler.OnData(dataFragmentArg);
return;
SetStateClosedByServer:
Trace("CH[{0}] closed by server", LocalChannel);
SetStateClosed(true);
return;
OnUnhandledPacket:
Handler.OnUnhandledPacket((byte)packetType, packetFragment);
return;
}
/// <summary>
/// Process packet about this channel.
/// </summary>
/// <param name="packetType">a packet type (message number)</param>
/// <param name="packetFragment">a packet image except message number and recipient channel.</param>
public override void ProcessPacket(SSH1PacketType packetType, DataFragment packetFragment)
{
if (_state == State.Closed) {
return; // ignore
}
DataFragment dataFragmentArg;
lock (_stateSync) {
switch (_state) {
case State.InitiatedByServer:
break;
case State.InitiatedByClient:
if (packetType == SSH1PacketType.SSH_MSG_CHANNEL_OPEN_CONFIRMATION) {
SSH1DataReader reader = new SSH1DataReader(packetFragment);
SetRemoteChannel(reader.ReadUInt32());
_state = State.Established;
Monitor.PulseAll(_stateSync); // notifies state change
dataFragmentArg = new DataFragment(0);
goto OnEstablished; // do it out of the lock block
}
if (packetType == SSH1PacketType.SSH_MSG_CHANNEL_OPEN_FAILURE) {
goto RequestFailed; // do it out of the lock block
}
break;
case State.Closing:
if (packetType == SSH1PacketType.SSH_MSG_CHANNEL_CLOSE_CONFIRMATION) {
goto SetStateClosedByClient; // do it out of the lock block
}
break;
case State.Established:
case State.Ready:
if (ProcessPacketSub(packetType, packetFragment) == SubPacketProcessResult.Consumed) {
return;
}
switch (packetType) {
case SSH1PacketType.SSH_MSG_CHANNEL_DATA: {
SSH1DataReader reader = new SSH1DataReader(packetFragment);
int len = reader.ReadInt32();
dataFragmentArg = reader.GetRemainingDataView(len);
}
goto OnData; // do it out of the lock block
case SSH1PacketType.SSH_MSG_CHANNEL_CLOSE:
Transmit(
new SSH1Packet(SSH1PacketType.SSH_MSG_CHANNEL_CLOSE_CONFIRMATION)
.WriteUInt32(RemoteChannel)
);
goto SetStateClosedByServer; // do it out of the lock block
}
goto OnUnhandledPacket; // do it out of the lock block
}
}
return;
OnEstablished:
Trace("CH[{0}] channel opend : remoteChannel={1}", LocalChannel, RemoteChannel);
Handler.OnEstablished(dataFragmentArg);
OnChannelEstablished();
return;
RequestFailed:
Trace("CH[{0}] request failed", LocalChannel);
RequestFailed();
return;
SetStateClosedByClient:
Trace("CH[{0}] closed by client", LocalChannel);
SetStateClosed(false);
return;
SetStateClosedByServer:
Trace("CH[{0}] closed by server", LocalChannel);
SetStateClosed(true);
return;
OnData:
Handler.OnData(dataFragmentArg);
return;
OnUnhandledPacket:
Handler.OnUnhandledPacket((byte)packetType, packetFragment);
return;
}