public void Load(System.IO.Stream stream)
{
modelFolder = new LM2_ModelFolder(this);
DrawableContainer.Name = FileName;
Renderer = new LM2_Renderer();
DrawableContainer.Drawables.Add(Renderer);
Text = FileName;
var HashNames = NLG_Common.HashNames;
using (var reader = new FileReader(stream))
{
reader.ByteOrder = Syroot.BinaryData.ByteOrder.LittleEndian;
uint Identifier = reader.ReadUInt32();
ushort Unknown = reader.ReadUInt16(); //Could also be 2 bytes, not sure. Always 0x0401
IsCompressed = reader.ReadByte() == 1;
reader.ReadByte(); //Padding
uint FileCount = reader.ReadUInt32();
uint LargestCompressedFile = reader.ReadUInt32();
reader.SeekBegin(0x2C);
byte[] Unknowns = reader.ReadBytes((int)FileCount);
TreeNode tableNodes = new TreeNode("File Section Entries");
long FileTablePos = reader.Position;
for (int i = 0; i < FileCount; i++)
{
var file = new FileEntry(this);
file.Text = $"entry {i}";
file.Read(reader);
fileEntries.Add(file);
tableNodes.Nodes.Add(file);
//The first file stores a chunk layout
//The second one seems to be a duplicate?
if (i == 0)
{
using (var tableReader = new FileReader(file.GetData()))
{
ChunkTable = new LM2_ChunkTable();
ChunkTable.Read(tableReader);
TreeNode debugFolder = new TreeNode("DEBUG TABLE INFO");
Nodes.Add(debugFolder);
TreeNode list1 = new TreeNode("Entry List 1");
TreeNode list2 = new TreeNode("Entry List 2 ");
debugFolder.Nodes.Add(tableNodes);
debugFolder.Nodes.Add(list1);
debugFolder.Nodes.Add(list2);
debugFolder.Nodes.Add(chunkFolder);
foreach (var chunk in ChunkTable.ChunkEntries)
{
list1.Nodes.Add($"ChunkType {chunk.ChunkType} ChunkOffset {chunk.ChunkOffset} Unknown1 {chunk.Unknown1} ChunkSubCount {chunk.ChunkSubCount} Unknown3 {chunk.Unknown3}");
}
foreach (var chunk in ChunkTable.ChunkSubEntries)
{
list2.Nodes.Add($"ChunkType {chunk.ChunkType} ChunkSize {chunk.ChunkSize} ChunkOffset {chunk.ChunkOffset}");
}
}
}
}
//Set an instance of our current data
//Chunks are in order, so you build off of when an instance gets loaded
TexturePOWE currentTexture = new TexturePOWE();
LM2_Model currentModel = new LM2_Model(this);
//Each part of the file is divided into multiple file/section entries
//The first entry being the chunk table parsed before this
//The second file being a duplicate (sometimes slightly larger than the first)
//The third file stores texture headers, while the fourth one usually has the rest of the main data
//Any additional ones currently are unknown how they work. Some of which have unknown compression aswell
byte[] File002Data = fileEntries[2].GetData(); //Get the third file
byte[] File003Data = fileEntries[3].GetData(); //Get the fourth file
List <uint> ModelHashes = new List <uint>();
for (int i = 0; i < ChunkTable.ChunkEntries.Count; i++)
{
if (ChunkTable.ChunkEntries[i].ChunkType == DataType.Model)
{
}
using (var chunkReader = new FileReader(File002Data))
{
chunkReader.SeekBegin(ChunkTable.ChunkEntries[i].ChunkOffset);
uint magic = chunkReader.ReadUInt32();
uint hash = chunkReader.ReadUInt32();
ModelHashes.Add(hash);
Console.WriteLine($"{ChunkTable.ChunkEntries[i].ChunkType} {hash}");
}
}
int chunkId = 0;
uint ImageHeaderIndex = 0;
uint modelIndex = 0;
uint messageIndex = 0;
foreach (var chunk in ChunkTable.ChunkSubEntries)
{
var chunkEntry = new ChunkDataEntry(this, chunk);
chunkEntry.Text = $"Chunk {chunk.ChunkType.ToString("X")} {chunk.ChunkType} {chunkId++}";
chunkEntries.Add(chunkEntry);
chunkFolder.Nodes.Add(chunkEntry);
if (chunk.BlockIndex == 0)
{
chunkEntry.DataFile = File002Data;
}
else if (chunk.BlockIndex == 1)
{
chunkEntry.DataFile = File003Data;
}
switch (chunk.ChunkType)
{
case SubDataType.TextureHeader:
//Read the info
using (var textureReader = new FileReader(chunkEntry.FileData))
{
currentTexture = new TexturePOWE();
currentTexture.ImageKey = "texture";
currentTexture.SelectedImageKey = currentTexture.ImageKey;
currentTexture.Index = ImageHeaderIndex;
currentTexture.Read(textureReader);
currentTexture.Text = $"Texture {ImageHeaderIndex}";
textureFolder.Nodes.Add(currentTexture);
Renderer.TextureList.Add(currentTexture);
Console.WriteLine(currentTexture.ID2);
ImageHeaderIndex++;
}
break;
case SubDataType.TextureData:
currentTexture.ImageData = chunkEntry.FileData;
break;
case SubDataType.MaterialData:
currentModel = new LM2_Model(this);
currentModel.ModelInfo = new LM2_ModelInfo();
currentModel.Text = $"Model {modelIndex}";
currentModel.ModelInfo.Data = chunkEntry.FileData;
modelFolder.Nodes.Add(currentModel);
if (ModelHashes.Count > modelIndex)
{
currentModel.Text = $"Model {modelIndex} {ModelHashes[(int)modelIndex].ToString("x")}";
if (HashNames.ContainsKey(ModelHashes[(int)modelIndex]))
{
currentModel.Text = HashNames[ModelHashes[(int)modelIndex]];
}
}
modelIndex++;
break;
case SubDataType.ModelData:
uint numModels = chunk.ChunkSize / 16;
using (var dataReader = new FileReader(chunkEntry.FileData))
{
for (int i = 0; i < numModels; i++)
{
uint hashID = dataReader.ReadUInt32();
uint numMeshes = dataReader.ReadUInt32();
dataReader.ReadUInt32();
dataReader.ReadUInt32(); //0
Console.WriteLine(hashID);
string text = hashID.ToString("X");
if (HashNames.ContainsKey(hashID))
{
text = HashNames[hashID];
}
if (i == 0)
{
currentModel.Text = text;
}
}
}
break;
case SubDataType.MeshBuffers:
currentModel.BufferStart = chunkEntry.Entry.ChunkOffset;
currentModel.BufferSize = chunkEntry.Entry.ChunkSize;
break;
case SubDataType.BoneData:
if (chunk.ChunkSize > 0x40 && currentModel.Skeleton == null)
{
using (var boneReader = new FileReader(chunkEntry.FileData))
{
currentModel.Skeleton = new STSkeleton();
DrawableContainer.Drawables.Add(currentModel.Skeleton);
uint numBones = chunk.ChunkSize / 68;
for (int i = 0; i < numBones; i++)
{
boneReader.SeekBegin(i * 68);
uint HashID = boneReader.ReadUInt32();
boneReader.ReadUInt32(); //unk
boneReader.ReadUInt32(); //unk
boneReader.ReadUInt32(); //unk
boneReader.ReadSingle(); //0
var Scale = new OpenTK.Vector3(
boneReader.ReadSingle(),
boneReader.ReadSingle(),
boneReader.ReadSingle());
boneReader.ReadSingle(); //0
var Rotate = new OpenTK.Vector3(
boneReader.ReadSingle(),
boneReader.ReadSingle(),
boneReader.ReadSingle());
boneReader.ReadSingle(); //0
var Position = new OpenTK.Vector3(
boneReader.ReadSingle(),
boneReader.ReadSingle(),
boneReader.ReadSingle());
boneReader.ReadSingle(); //1
STBone bone = new STBone(currentModel.Skeleton);
bone.Text = HashID.ToString("X");
if (NLG_Common.HashNames.ContainsKey(HashID))
{
bone.Text = NLG_Common.HashNames[HashID];
}
bone.position = new float[3] {
Position.X, Position.Z, -Position.Y
};
bone.rotation = new float[4] {
Rotate.X, Rotate.Z, -Rotate.Y, 1
};
bone.scale = new float[3] {
0.2f, 0.2f, 0.2f
};
bone.RotationType = STBone.BoneRotationType.Euler;
currentModel.Skeleton.bones.Add(bone);
}
currentModel.Skeleton.reset();
currentModel.Skeleton.update();
}
}
break;
case SubDataType.VertexStartPointers:
using (var vtxPtrReader = new FileReader(chunkEntry.FileData))
{
while (!vtxPtrReader.EndOfStream)
{
currentModel.VertexBufferPointers.Add(vtxPtrReader.ReadUInt32());
}
}
break;
case SubDataType.SubmeshInfo:
int MeshCount = chunkEntry.FileData.Length / 0x28;
using (var meshReader = new FileReader(chunkEntry.FileData))
{
for (uint i = 0; i < MeshCount; i++)
{
LM2_Mesh mesh = new LM2_Mesh();
mesh.Read(meshReader);
currentModel.Meshes.Add(mesh);
}
}
currentModel.ModelInfo.Read(new FileReader(currentModel.ModelInfo.Data), currentModel.Meshes);
break;
case SubDataType.ModelTransform:
using (var transformReader = new FileReader(chunkEntry.FileData))
{
//This is possibly very wrong
//The data isn't always per mesh, but sometimes is
if (transformReader.BaseStream.Length / 0x40 == currentModel.Meshes.Count)
{
for (int i = 0; i < currentModel.Meshes.Count; i++)
{
currentModel.Meshes[i].Transform = transformReader.ReadMatrix4();
}
}
}
break;
case SubDataType.BoneHashes:
using (var chunkReader = new FileReader(chunkEntry.FileData))
{
while (chunkReader.Position <= chunkReader.BaseStream.Length - 4)
{
uint hash = chunkReader.ReadUInt32();
string strHash = hash.ToString("X");
if (NLG_Common.HashNames.ContainsKey(hash))
{
strHash = NLG_Common.HashNames[hash];
}
}
}
break;
case (SubDataType)0x7105:
using (var chunkReader = new FileReader(chunkEntry.FileData))
{
}
break;
case SubDataType.MaterialName:
using (var matReader = new FileReader(chunkEntry.FileData))
{
string mat = matReader.ReadZeroTerminatedString();
materialNamesFolder.Nodes.Add(mat);
}
break;
case SubDataType.MessageData:
messageFolder.Nodes.Add(new NLOC_Wrapper($"Message Data {messageIndex++}",
new System.IO.MemoryStream(chunkEntry.FileData)));
break;
default:
break;
}
}
foreach (LM2_Model model in modelFolder.Nodes)
{
model.ReadVertexBuffers();
}
if (messageFolder.Nodes.Count > 0)
{
Nodes.Add(messageFolder);
}
if (modelFolder.Nodes.Count > 0)
{
Nodes.Add(modelFolder);
}
if (textureFolder.Nodes.Count > 0)
{
Nodes.Add(textureFolder);
}
if (materialNamesFolder.Nodes.Count > 0)
{
Nodes.Add(materialNamesFolder);
}
}
}
public void Load(System.IO.Stream stream)
{
modelFolder = new LM2_ModelFolder(this);
DrawableContainer.Name = FileName;
Renderer = new LM2_Renderer();
DrawableContainer.Drawables.Add(Renderer);
Text = FileName;
using (var reader = new FileReader(stream))
{
reader.ByteOrder = Syroot.BinaryData.ByteOrder.LittleEndian;
uint Identifier = reader.ReadUInt32();
ushort Unknown = reader.ReadUInt16(); //Could also be 2 bytes, not sure. Always 0x0401
IsCompressed = reader.ReadByte() == 1;
reader.ReadByte(); //Padding
uint FileCount = reader.ReadUInt32();
uint LargestCompressedFile = reader.ReadUInt32();
reader.SeekBegin(0x2C);
byte[] Unknowns = reader.ReadBytes((int)FileCount);
TreeNode tableNodes = new TreeNode("File Section Entries");
long FileTablePos = reader.Position;
for (int i = 0; i < FileCount; i++)
{
var file = new FileEntry(this);
file.Text = $"entry {i}";
file.Read(reader);
fileEntries.Add(file);
tableNodes.Nodes.Add(file);
//The first file stores a chunk layout
//The second one seems to be a duplicate?
if (i == 0)
{
using (var tableReader = new FileReader(file.GetData()))
{
ChunkTable = new LM2_ChunkTable();
ChunkTable.Read(tableReader);
TreeNode debugFolder = new TreeNode("DEBUG TABLE INFO");
Nodes.Add(debugFolder);
TreeNode list1 = new TreeNode("Entry List 1");
TreeNode list2 = new TreeNode("Entry List 2 ");
debugFolder.Nodes.Add(tableNodes);
debugFolder.Nodes.Add(list1);
debugFolder.Nodes.Add(list2);
debugFolder.Nodes.Add(chunkFolder);
foreach (var chunk in ChunkTable.ChunkEntries)
{
list1.Nodes.Add($"ChunkType {chunk.ChunkType} ChunkOffset {chunk.ChunkOffset} Unknown1 {chunk.Unknown1} ChunkSubCount {chunk.ChunkSubCount} Unknown3 {chunk.Unknown3}");
}
foreach (var chunk in ChunkTable.ChunkSubEntries)
{
list2.Nodes.Add($"ChunkType {chunk.ChunkType} ChunkSize {chunk.ChunkSize} Unknown {chunk.ChunkOffset}");
}
}
}
}
//Set an instance of our current data
//Chunks are in order, so you build off of when an instance gets loaded
TexturePOWE currentTexture = new TexturePOWE();
LM2_Model currentModel = new LM2_Model(this);
//Each part of the file is divided into multiple file/section entries
//The first entry being the chunk table parsed before this
//The second file being a duplicate (sometimes slightly larger than the first)
//The third file stores texture headers, while the fourth one usually has the rest of the main data
//Any additional ones currently are unknown how they work. Some of which have unknown compression aswell
byte[] File002Data = fileEntries[2].GetData(); //Get the third file
byte[] File003Data = fileEntries[3].GetData(); //Get the fourth file
int chunkId = 0;
uint ImageHeaderIndex = 0;
uint modelIndex = 0;
foreach (var chunk in ChunkTable.ChunkSubEntries)
{
var chunkEntry = new ChunkDataEntry(this, chunk);
chunkEntry.DataFile = File003Data;
chunkEntry.Text = $"Chunk {chunk.ChunkType} {chunkId++}";
chunkEntries.Add(chunkEntry);
chunkFolder.Nodes.Add(chunkEntry);
switch (chunk.ChunkType)
{
case SubDataType.TextureHeader:
chunkEntry.DataFile = File002Data;
//Read the info
using (var textureReader = new FileReader(chunkEntry.FileData))
{
currentTexture = new TexturePOWE();
currentTexture.ImageKey = "texture";
currentTexture.SelectedImageKey = currentTexture.ImageKey;
currentTexture.Index = ImageHeaderIndex;
currentTexture.Read(textureReader);
currentTexture.Text = $"Texture {ImageHeaderIndex}";
textureFolder.Nodes.Add(currentTexture);
Renderer.TextureList.Add(currentTexture);
ImageHeaderIndex++;
}
break;
case SubDataType.TextureData:
currentTexture.ImageData = chunkEntry.FileData;
break;
case SubDataType.ModelStart:
currentModel = new LM2_Model(this);
currentModel.ModelInfo = new LM2_ModelInfo();
currentModel.Text = $"Model {modelIndex}";
currentModel.ModelInfo.Data = chunkEntry.FileData;
modelFolder.Nodes.Add(currentModel);
modelIndex++;
break;
case SubDataType.MeshBuffers:
currentModel.BufferStart = chunkEntry.Entry.ChunkOffset;
currentModel.BufferSize = chunkEntry.Entry.ChunkSize;
break;
case SubDataType.VertexStartPointers:
using (var vtxPtrReader = new FileReader(chunkEntry.FileData))
{
while (!vtxPtrReader.EndOfStream)
{
currentModel.VertexBufferPointers.Add(vtxPtrReader.ReadUInt32());
}
}
break;
case SubDataType.SubmeshInfo:
int MeshCount = chunkEntry.FileData.Length / 0x28;
using (var meshReader = new FileReader(chunkEntry.FileData))
{
for (uint i = 0; i < MeshCount; i++)
{
LM2_Mesh mesh = new LM2_Mesh();
mesh.Read(meshReader);
currentModel.Meshes.Add(mesh);
}
}
currentModel.ModelInfo.Read(new FileReader(currentModel.ModelInfo.Data), currentModel.Meshes);
break;
case SubDataType.ModelTransform:
using (var transformReader = new FileReader(chunkEntry.FileData))
{
//This is possibly very wrong
//The data isn't always per mesh, but sometimes is
if (transformReader.BaseStream.Length / 0x40 == currentModel.Meshes.Count)
{
for (int i = 0; i < currentModel.Meshes.Count; i++)
{
currentModel.Meshes[i].Transform = transformReader.ReadMatrix4();
}
}
}
break;
case SubDataType.MaterialName:
using (var matReader = new FileReader(chunkEntry.FileData))
{
materialNamesFolder.Nodes.Add(matReader.ReadZeroTerminatedString());
}
break;
default:
break;
}
}
foreach (LM2_Model model in modelFolder.Nodes)
{
model.ReadVertexBuffers();
}
if (modelFolder.Nodes.Count > 0)
{
Nodes.Add(modelFolder);
}
if (textureFolder.Nodes.Count > 0)
{
Nodes.Add(textureFolder);
}
if (materialNamesFolder.Nodes.Count > 0)
{
Nodes.Add(materialNamesFolder);
}
}
}