public void DoRequestListening()
{
using (EneterTrace.Entering())
{
myIsListeningToResponses = true;
ushort aCloseCode = 0;
try
{
DynamicStream aContinuousMessageStream = null;
while (!myStopReceivingRequestedFlag)
{
// Decode the incoming message.
WebSocketFrame aFrame = WebSocketFormatter.DecodeFrame(myClientStream);
if (!myStopReceivingRequestedFlag && aFrame != null)
{
// Frames from server must be unmasked.
// According the protocol, If the frame was NOT masked, the server must close connection with the client.
if (aFrame.MaskFlag == false)
{
throw new InvalidOperationException(TracedObject + "received unmasked frame from the client. Frames from client shall be masked.");
}
// Process the frame.
if (aFrame.FrameType == EFrameType.Ping)
{
// Response 'pong'. The response responses same data as received in the 'ping'.
SendFrame(maskingKey => WebSocketFormatter.EncodePongFrame(maskingKey, aFrame.Message));
}
else if (aFrame.FrameType == EFrameType.Close)
{
EneterTrace.Debug(TracedObject + "received the close frame.");
break;
}
else if (aFrame.FrameType == EFrameType.Pong)
{
Notify(PongReceived);
}
// If a new message starts.
else if (aFrame.FrameType == EFrameType.Binary || aFrame.FrameType == EFrameType.Text)
{
// If a previous message is not finished then the new message is not expected -> protocol error.
if (aContinuousMessageStream != null)
{
EneterTrace.Warning(TracedObject + "detected unexpected new message. (previous message was not finished)");
// Protocol error close code.
aCloseCode = 1002;
break;
}
WebSocketMessage aReceivedMessage = null;
// If the message does not come in multiple frames then optimize the performance
// and use MemoryStream instead of DynamicStream.
if (aFrame.IsFinal)
{
MemoryStream aMessageStream = new MemoryStream(aFrame.Message);
aReceivedMessage = new WebSocketMessage(aFrame.FrameType == EFrameType.Text, aMessageStream);
}
else
// if the message is split to several frames then use DynamicStream so that writing of incoming
// frames and reading of already received data can run in parallel.
{
// Create stream where the message data will be writen.
aContinuousMessageStream = new DynamicStream();
aContinuousMessageStream.WriteWithoutCopying(aFrame.Message, 0, aFrame.Message.Length);
aReceivedMessage = new WebSocketMessage(aFrame.FrameType == EFrameType.Text, aContinuousMessageStream);
}
// Put received message to the queue.
myReceivedMessages.EnqueueMessage(aReceivedMessage);
}
// If a message continues. (I.e. message is split into more fragments.)
else if (aFrame.FrameType == EFrameType.Continuation)
{
// If the message does not exist then continuing frame does not have any sense -> protocol error.
if (aContinuousMessageStream == null)
{
EneterTrace.Warning(TracedObject + "detected unexpected continuing of a message. (none message was started before)");
// Protocol error close code.
aCloseCode = 1002;
break;
}
aContinuousMessageStream.WriteWithoutCopying(aFrame.Message, 0, aFrame.Message.Length);
// If this is the final frame.
if (aFrame.IsFinal)
{
aContinuousMessageStream.IsBlockingMode = false;
aContinuousMessageStream = null;
}
}
}
// If disconnected
if (aFrame == null)// || !myTcpClient.Client.Poll(0, SelectMode.SelectWrite))
{
//EneterTrace.Warning(TracedObject + "detected the TCP connection is not available. The connection will be closed.");
break;
}
}
}
catch (IOException)
{
// Ignore this exception. It is often thrown when the connection was closed.
// Do not thrace this because the tracing degradates the performance in this case.
}
catch (Exception err)
{
EneterTrace.Error(TracedObject + ErrorHandler.FailedInListeningLoop, err);
}
// If the connection is being closed due to a protocol error.
if (aCloseCode > 1000)
{
// Try to send the close message.
try
{
byte[] aCloseMessage = WebSocketFormatter.EncodeCloseFrame(null, aCloseCode);
myClientStream.Write(aCloseMessage, 0, aCloseMessage.Length);
}
catch
{
}
}
myIsListeningToResponses = false;
myReceivedMessages.UnblockProcessingThreads();
// Notify the listening to messages stoped.
Notify(ConnectionClosed);
}
}
private void HandleConnection(IWebSocketClientContext client)
{
using (EneterTrace.Entering())
{
string aClientIp = (client.ClientEndPoint != null) ? client.ClientEndPoint.ToString() : "";
TClientContext aClientContext = new TClientContext(client);
string aClientId = null;
try
{
client.SendTimeout = mySendTimeout;
client.ReceiveTimeout = myReceiveTimeout;
// If protocol formatter does not use OpenConnection message.
if (!myProtocolUsesOpenConnectionMessage)
{
aClientId = Guid.NewGuid().ToString();
using (ThreadLock.Lock(myConnectedClients))
{
myConnectedClients[aClientId] = aClientContext;
}
ProtocolMessage anOpenConnectionProtocolMessage = new ProtocolMessage(EProtocolMessageType.OpenConnectionRequest, aClientId, null);
MessageContext aMessageContext = new MessageContext(anOpenConnectionProtocolMessage, aClientIp);
NotifyMessageContext(aMessageContext);
}
while (true)
{
// Block until a message is received or the connection is closed.
WebSocketMessage aWebSocketMessage = client.ReceiveMessage();
if (aWebSocketMessage != null && myMessageHandler != null)
{
ProtocolMessage aProtocolMessage = myProtocolFormatter.DecodeMessage((Stream)aWebSocketMessage.InputStream);
// Note: security reasons ignore close connection message in WebSockets.
// So that it is not possible that somebody will just send a close message which will have id of somebody else.
// The connection will be closed when the client closes the socket.
if (aProtocolMessage != null && aProtocolMessage.MessageType != EProtocolMessageType.CloseConnectionRequest)
{
MessageContext aMessageContext = new MessageContext(aProtocolMessage, aClientIp);
// If protocol formatter uses open connection message to create the connection.
if (aProtocolMessage.MessageType == EProtocolMessageType.OpenConnectionRequest &&
myProtocolUsesOpenConnectionMessage)
{
// Note: if client id is already set then it means this client has already open connection.
if (string.IsNullOrEmpty(aClientId))
{
aClientId = !string.IsNullOrEmpty(aProtocolMessage.ResponseReceiverId) ? aProtocolMessage.ResponseReceiverId : Guid.NewGuid().ToString();
using (ThreadLock.Lock(myConnectedClients))
{
if (!myConnectedClients.ContainsKey(aClientId))
{
myConnectedClients[aClientId] = aClientContext;
}
else
{
// Note: if the client id already exists then the connection cannot be open
// and the connection with this client will be closed.
EneterTrace.Warning(TracedObject + "could not open connection for client '" + aClientId + "' because the client with same id is already connected.");
break;
}
}
}
else
{
EneterTrace.Warning(TracedObject + "the client '" + aClientId + "' has already open connection.");
}
}
// Notify message.
// Ensure that nobody will try to use id of somebody else.
aMessageContext.ProtocolMessage.ResponseReceiverId = aClientId;
NotifyMessageContext(aMessageContext);
}
else if (aProtocolMessage == null)
{
// Client disconnected. Or the client shall be disconnected because of incorrect message format.
break;
}
}
else
{
break;
}
}
}
finally
{
// Remove client from connected clients.
if (aClientId != null)
{
using (ThreadLock.Lock(myConnectedClients))
{
myConnectedClients.Remove(aClientId);
}
}
// If the disconnection does not come from the service
// and the client was successfuly connected then notify about the disconnection.
if (!aClientContext.IsClosedFromService && aClientId != null)
{
ProtocolMessage aCloseProtocolMessage = new ProtocolMessage(EProtocolMessageType.CloseConnectionRequest, aClientId, null);
MessageContext aMessageContext = new MessageContext(aCloseProtocolMessage, aClientIp);
// Notify duplex input channel about the disconnection.
NotifyMessageContext(aMessageContext);
}
client.CloseConnection();
}
}
}