public unsafe void FillCircle(SimpleImage img, uint clr, Circle2D circle)
{
// Optimization: For composite-blending, we don't have do draw anything if the
// drawing color has an alpha value of zero
if (0 == (clr & 0xFF000000))
{
return;
}
// Soften radius (hard-coded for now)
float sr = 2.0f;
// Compute the inclusive y-starting point
int ystart = (int)Math.Floor(circle.MinY);
// Compute the inclusive y-ending point
int yend = (int)Math.Ceiling(circle.MaxY);
// Do a quick check to see if we're completely off the image
if (yend < 0 || ystart >= img.Height)
{
return;
}
// Constrain y-values, if needed
if (ystart < 0)
{
ystart = 0;
}
if (yend > img.Height - 1)
{
yend = img.Height - 1;
}
// Compute a float alpha value in the range [0.0, 1.0]
float alpha = (float)(clr >> 24) / 255.0f;
// Loop through rows of pixels
for (; ystart <= yend; ystart++)
{
// Compute intersections for this row
float minx, maxx;
circle.HLineIntersection((float)ystart, out minx, out maxx);
// Skip to the next row if there was no intersection
if (float.IsNaN(minx) || float.IsNaN(maxx))
{
continue;
}
// Compute the starting point on the left edge of the circle
int xLeft = (int)Math.Floor(minx);
// Skip this row if it's off the image
if (xLeft >= img.Width)
{
continue;
}
// Constrain if necessary
if (xLeft < 0)
{
xLeft = 0;
}
// Now compute the starting point on the right edge of the circle
int xRight = (int)Math.Ceiling(maxx);
// Skip if we're completely off the image
if (xRight < 0)
{
continue;
}
// Constrain, if necessary
if (xRight >= img.Width)
{
xRight = img.Width - 1;
}
// Make a pointer to this row of pixels
uint* row = &img.Pixels[ystart * img.Width + xLeft];
// Draw from the left edge until we hit a point where we're no longer within
// the softening radius distance from the edge
while (xLeft <= xRight)
{
float dist = circle.DistanceFromCenter((float)xLeft, (float)ystart);
if (dist >= circle.Radius)
{
// Advance to next pixel
row++;
xLeft++;
continue;
}
if (dist <= circle.Radius - sr)
{
break;
}
// Compute the alpha value
float newAFloat = (circle.Radius - dist) / sr * alpha * 255.0f;
// Blend
BlendComposite((clr & 0x00FFffFF) | (((uint)newAFloat) << 24), row);
// Advance to next pixel
row++;
xLeft++;
// See if we end up heading off the right edge of the image
if (xLeft >= img.Width)
{
break;
}
}
// If we drew pixels until we went off the image, then are done with this row
if (xLeft >= img.Width)
{
continue;
}
// It's possible, depending on the softening radius and which part of the circle we're
// rendering, that the entire row has already been processed. Remember that xLeft at
// this point is one to the right of the last pixel that was processed.
if (xRight < xLeft)
{
continue;
}
// Set the pointer to where we're starting
row = &img.Pixels[ystart * img.Width + xRight];
// Draw from the right edge until we hit a point where we're:
// a) no longer within the softening radius distance from the edge
// b) we're off the image (xRight < 0)
// or
// c) we're less than xLeft
while (xRight >= 0)
{
float dist = circle.DistanceFromCenter((float)xRight, (float)ystart);
if (dist >= circle.Radius)
{
// Advance to next pixel
row--;
xRight--;
continue;
}
if (dist <= circle.Radius - sr)
{
break;
}
// Compute the alpha value
float newAFloat = (circle.Radius - dist) / sr * alpha * 255.0f;
// Blend
BlendComposite((clr & 0x00FFffFF) | (((uint)newAFloat) << 24), row);
// Advance to next pixel
row--;
xRight--;
if (xRight < xLeft)
{
break;
}
}
// At this point we've processed from the left and right edges of the circle
// on this row and have taken care of all pixels that need edge softening. All
// that remains is filling pixels in between where we left off on the left and
// right.
if (xRight >= xLeft)
{
DrawHorizontalLine(xLeft, xRight, ystart, clr, img.Pixels, img.Width, img.Height,
BlendMode.AlphaComposite);
}
}
}
protected unsafe void FrameCircle_Composite(Circle2D circle, float frameThickness,
uint clr, uint* pxls, int w, int h)
{
// Softening radius (hard-coded for now)
float sr = 2.0f;
// Handle case where the frame is so thick that we just fill the whole circle
if (frameThickness / 2.0f >= circle.Radius + sr)
{
Circle2D newCircle = new Circle2D(circle.Center, circle.Radius + frameThickness / 2f);
FillCircle(new SimpleImage(w, h, pxls), clr, circle);
return;
}
// First make the outer and inner circle objects
Circle2D outer = new Circle2D(circle.Center, circle.Radius + frameThickness / 2.0f);
Circle2D inner = new Circle2D(circle.Center, circle.Radius - frameThickness / 2.0f);
int y = (int)Math.Max(0.0f, Math.Floor(outer.MinY));
for (; y < h; y++)
{
// Compute the x-intersection points for this y-value
float outMin, outMax, inMin, inMax;
outer.HLineIntersection((float)y, out outMin, out outMax);
inner.HLineIntersection((float)y, out inMin, out inMax);
// If there's not a valid intersection, then skip this row. Note that there
// could be an intersection with the outer circle and not the inner, but not
// the other way around.
if (float.IsNaN(outMin) || float.IsNaN(outMax))
{
continue;
}
float[] ranges;
if (float.IsNaN(inMin) || float.IsNaN(inMax))
{
// This means there's an intersection with the outer circle and not the
// inner. In this case we only have one continuous range of pixels to
// process for this row.
// Check to see if we're off the image
if (outMax < 0.0f || outMin > (float)(w - 1))
{
continue;
}
ranges = new float[] { outMin, outMax };
}
else
{
ranges = new float[] { outMin, inMin, inMax, outMax };
}
// Process the pixel ranges
for (int i = 0; i < ranges.Length; i += 2)
{
int x = (int)Math.Max(0.0f, Math.Floor(ranges[i]));
int maxx = (int)Math.Min((float)(w - 1), Math.Ceiling(ranges[i + 1]));
// Make a pointer to the pixel where we start rendering
uint* row = &pxls[y * w + x];
while (x <= maxx)
{
// Compute the distance from this pixel to the edge of the circle and
// soften if needed
float dist = circle.DistanceFromCenter(new Vector2D(x, y));
if (dist >= outer.Radius || dist <= inner.Radius)
{
x++;
row++;
continue;
}
if ((outer.Radius - dist) <= sr)
{
float newA = ((outer.Radius - dist) / sr) * 255.0f;
BlendComposite((clr & 0x00FFffFF) | (((uint)newA) << 24), row);
}
else if ((dist - inner.Radius) <= sr)
{
float newA = ((dist - inner.Radius) / sr) * 255.0f;
BlendComposite((clr & 0x00FFffFF) | (((uint)newA) << 24), row);
}
else
{
BlendComposite(clr, row);
}
x++;
row++;
}
}
}
}
