public void update(float bottomStart, float height, float botWidth, float topWidth, float thickness)
{
float maxWidth = (topWidth > botWidth)? topWidth : botWidth;
float widthDiff = (topWidth > botWidth) ? topWidth - botWidth : botWidth - topWidth;
Cylinder c0 = multiCylinder.cylinders[0];
Cylinder c1 = multiCylinder.cylinders[1];
Cylinder c2 = multiCylinder.cylinders[2];
//Sets outer shell values
c0.bottomStart = bottomStart;
c0.height = height;
c0.botWidth = botWidth;
c0.topWidth = topWidth;
c0.tiling = 2;
c0.uvBot = 0;
c0.uvTop = (height) / (6 * maxWidth / c0.tiling);
if (c0.uvTop > 240 / 512f)
{
}
c0.uvTop = 240 / 512f;
//Sets top bit values
c1.bottomStart = bottomStart + height;
c1.height = 0;
c1.botWidth = topWidth;
c1.topWidth = topWidth - thickness * topWidth;
c1.uvBot = (241 / 512f);
c1.uvTop = ((512 - 241) / 512f);
c1.tiling = ((int)(6 * (30 / 512f) / (thickness * topWidth) * (6 * topWidth))) / 6f;
//Sets inner shell values
c2.bottomStart = bottomStart + height;
c2.height = -height;
c2.botWidth = topWidth - thickness * topWidth;
c2.topWidth = botWidth - thickness * topWidth;
c2.uvBot = ((512 - 240) / 512f);
c2.uvTop = 1;
//Updates mesh
multiCylinder.UpdateCylinders();
}
public void update()
{
getDecouplerShroudValues();
topWidth += antiZFightSizeIncrease;
botWidth += antiZFightSizeIncrease;
float maxWidth = (topWidth > botWidth)? topWidth : botWidth;
float widthDiff = (topWidth > botWidth) ? topWidth - botWidth : botWidth - topWidth;
Cylinder c0 = multiCylinder.cylinders[0]; //outside shell
Cylinder c1 = multiCylinder.cylinders[1]; //top flat bit
Cylinder c2 = multiCylinder.cylinders[2]; //inside
Cylinder c3 = multiCylinder.cylinders[3]; //bottom tucked in edge
Cylinder c4 = multiCylinder.cylinders[4]; //top bevel in edge
Vector2 bevel = new Vector2((botWidth - topWidth), height).normalized + Vector2.right;
bevel = bevel.normalized * topBevelSize;
//Creates bottom edge
c3.bottomStart = vertOffset - bottomEdgeSize;
c3.height = bottomEdgeSize;
c3.botWidth = botWidth - bottomEdgeSize;
c3.topWidth = botWidth;
c3.tiling = 2;
c3.uvBot = 0;
c3.uvTop = .01f;
//Sets outer shell values
c0.bottomStart = vertOffset;
c0.height = height - bevel.y;
c0.botWidth = botWidth;
c0.topWidth = topWidth;
c0.tiling = 2;
c0.uvBot = 0.01f;
c0.uvTop = 240 / 512f - .01f;
//c0.uvTop = (height) / (6*maxWidth / c0.tiling);
//if (c0.uvTop > 240 / 512f) {
//}
//Set top Bevel
c4.bottomStart = vertOffset + height - bevel.y;
c4.height = bevel.y;
c4.botWidth = topWidth;
c4.topWidth = topWidth - bevel.x;
c4.tiling = 2;
c4.uvBot = 240 / 512f - .01f;
c4.uvTop = 240 / 512f;
//Sets top bit values
c1.bottomStart = vertOffset + height;
c1.height = 0;
c1.botWidth = topWidth - bevel.x;
c1.topWidth = (topWidth - bevel.x) - thickness * topWidth;
c1.uvBot = (241 / 512f);
c1.uvTop = ((512 - 241) / 512f);
c1.tiling = ((int)(6 * (30 / 512f) / (thickness * topWidth) * (6 * topWidth))) / 6f;
//Sets inner shell values
c2.bottomStart = vertOffset + height;
c2.height = -height;
c2.botWidth = topWidth - thickness * topWidth;
c2.topWidth = botWidth - thickness * topWidth;
c2.uvBot = ((512 - 240) / 512f);
c2.uvTop = 1;
topWidth -= antiZFightSizeIncrease;
botWidth -= antiZFightSizeIncrease;
//Updates mesh
multiCylinder.UpdateCylinders();
}
public void setCylinderValues()
{
getDecouplerShroudValues();
topWidth += antiZFightSizeIncrease;
botWidth += antiZFightSizeIncrease;
float maxWidth = (topWidth > botWidth) ? topWidth : botWidth;
float widthDiff = (topWidth > botWidth) ? topWidth - botWidth : botWidth - topWidth;
Cylinder cout = multiCylinder.cylinders[0]; //outside shell
Cylinder ctopBevel = multiCylinder.cylinders[5]; //top bevel in edge
Cylinder ctop = multiCylinder.cylinders[4]; //top flat bit
Cylinder inside = multiCylinder.cylinders[3]; //inside
Cylinder cbot = multiCylinder.cylinders[2]; //bottom flat
Cylinder cBotBevel = multiCylinder.cylinders[1]; //bottom tucked in edge
Cylinder coll0 = collCylinder.cylinders[0]; //Collision outer
Cylinder coll1 = collCylinder.cylinders[1]; //Collision inner
Vector2 bevel = new Vector2((botWidth - topWidth), height).normalized + Vector2.right;
bevel = bevel.normalized * topBevelSize;
//Creates bottom edge
cBotBevel.submesh = 0;
cBotBevel.bottomStart = vertOffset - bottomEdgeSize;
cBotBevel.height = bottomEdgeSize;
cBotBevel.botWidth = botWidth - bottomEdgeSize;
cBotBevel.topWidth = botWidth;
cBotBevel.uvBot = 0;
cBotBevel.uvTop = .01f;
//Sets outer shell values
cout.submesh = 0;
cout.bottomStart = vertOffset;
cout.height = height - bevel.y;
cout.botWidth = botWidth;
cout.topWidth = topWidth;
cout.uvBot = 0.01f;
cout.uvTop = 1 - .01f;
cout.rings = outerEdgeLoops;
//c0.uvTop = (height) / (6*maxWidth / c0.tiling);
//if (c0.uvTop > 240 / 512f) {
//}
//Set top Bevel
ctopBevel.submesh = 0;
ctopBevel.bottomStart = vertOffset + height - bevel.y;
ctopBevel.height = bevel.y;
ctopBevel.botWidth = topWidth;
ctopBevel.topWidth = topWidth - bevel.x;
ctopBevel.uvBot = 1 - .01f;
ctopBevel.uvTop = 1;
//Sets top bit values
ctop.submesh = 1;
ctop.bottomStart = vertOffset + height;
ctop.height = 0;
ctop.botWidth = topWidth - bevel.x;
ctop.topWidth = (topWidth - bevel.x) - thickness * topWidth;
ctop.uvBot = 0;
ctop.uvTop = 1;
ctop.rings = topEdgeLoops;
//Sets bottom flat bit
cbot.submesh = 1;
cbot.bottomStart = vertOffset - bottomEdgeSize;
cbot.height = 0;
cbot.topWidth = botWidth - bottomEdgeSize;
cbot.botWidth = Mathf.Min(botWidth - thickness * topWidth, botWidth - bottomEdgeSize);
cbot.uvBot = 0;
cbot.uvTop = 1;
cbot.rings = topEdgeLoops;
//Sets inner shell values
inside.submesh = 2;
inside.bottomStart = vertOffset + height;
inside.height = -height - bottomEdgeSize;
inside.botWidth = topWidth - thickness * topWidth;
inside.topWidth = Mathf.Min(botWidth - thickness * topWidth, botWidth - bottomEdgeSize);
inside.uvBot = 0;
inside.uvTop = 1;
coll0.submesh = 0;
coll0.bottomStart = vertOffset;
coll0.height = height - bevel.y;
coll0.botWidth = botWidth;
coll0.topWidth = topWidth;
coll1.uvBot = 0;
coll1.uvTop = 1;
coll1.submesh = 0;
coll1.bottomStart = vertOffset + height;
coll1.height = -height - bottomEdgeSize;
coll1.botWidth = topWidth - thickness * topWidth / 4f;
coll1.topWidth = Mathf.Min(botWidth - thickness * topWidth / 4f, botWidth - bottomEdgeSize);
coll1.uvBot = 0;
coll1.uvTop = 1;
topWidth -= antiZFightSizeIncrease;
botWidth -= antiZFightSizeIncrease;
}
public void setCylinderValues()
{
getDecouplerShroudValues();
topWidth += antiZFightSizeIncrease;
botWidth += antiZFightSizeIncrease;
float maxWidth = (topWidth > botWidth) ? topWidth : botWidth;
float widthDiff = (topWidth > botWidth) ? topWidth - botWidth : botWidth - topWidth;
Cylinder c0 = multiCylinder.cylinders[0]; //outside shell
Cylinder c1 = multiCylinder.cylinders[1]; //top flat bit
Cylinder c2 = multiCylinder.cylinders[2]; //inside
Cylinder c3 = multiCylinder.cylinders[3]; //bottom tucked in edge
Cylinder c4 = multiCylinder.cylinders[4]; //top bevel in edge
Cylinder c5 = multiCylinder.cylinders[5]; //bottom flat
Vector2 bevel = new Vector2((botWidth - topWidth), height).normalized + Vector2.right;
bevel = bevel.normalized * topBevelSize;
//Creates bottom edge
c3.submesh = 0;
c3.bottomStart = vertOffset - bottomEdgeSize;
c3.height = bottomEdgeSize;
c3.botWidth = botWidth - bottomEdgeSize;
c3.topWidth = botWidth;
c3.uvBot = 0;
c3.uvTop = .01f;
//Sets outer shell values
c0.submesh = 0;
c0.bottomStart = vertOffset;
c0.height = height - bevel.y;
c0.botWidth = botWidth;
c0.topWidth = topWidth;
c0.uvBot = 0.01f;
c0.uvTop = 1 - .01f;
c0.rings = outerEdgeLoops;
//c0.uvTop = (height) / (6*maxWidth / c0.tiling);
//if (c0.uvTop > 240 / 512f) {
//}
//Set top Bevel
c4.submesh = 0;
c4.bottomStart = vertOffset + height - bevel.y;
c4.height = bevel.y;
c4.botWidth = topWidth;
c4.topWidth = topWidth - bevel.x;
c4.uvBot = 1 - .01f;
c4.uvTop = 1;
//Sets top bit values
c1.submesh = 1;
c1.bottomStart = vertOffset + height;
c1.height = 0;
c1.botWidth = topWidth - bevel.x;
c1.topWidth = (topWidth - bevel.x) - thickness * topWidth;
c1.uvBot = 0;
c1.uvTop = 1;
c1.rings = topEdgeLoops;
//Sets bottom flat bit
c5.submesh = 1;
c5.bottomStart = vertOffset - bottomEdgeSize;
c5.height = 0;
c5.topWidth = botWidth - bottomEdgeSize;
c5.botWidth = Mathf.Min(botWidth - thickness * topWidth, botWidth - bottomEdgeSize);
c5.uvBot = 0;
c5.uvTop = 1;
c5.rings = topEdgeLoops;
//Sets inner shell values
c2.submesh = 2;
c2.bottomStart = vertOffset + height;
c2.height = -height - bottomEdgeSize;
c2.botWidth = topWidth - thickness * topWidth;
c2.topWidth = Mathf.Min(botWidth - thickness * topWidth, botWidth - bottomEdgeSize);
c2.uvBot = 0;
c2.uvTop = 1;
topWidth -= antiZFightSizeIncrease;
botWidth -= antiZFightSizeIncrease;
}