private void btnOK_Click(object sender, EventArgs e)
{
float showDepthMDTop = (float)nUDShowedTop.Value;
float showDepthMDBot = (float)nUDShowedBottom.Value;
if (rdbEle.Checked == true)
{
ItemWell curWell = cProjectData.ltProjectWell.SingleOrDefault(p => p.sJH == sJH);
if (curWell != null)
{
showDepthMDTop = -showDepthMDTop + curWell.fKB;
showDepthMDBot = -showDepthMDBot + curWell.fKB;
}
}
if (showDepthMDBot > showDepthMDTop)
{
cXmlBase.setSelectedNodeChildNodeValue(pathSectionCss, sJH, "fShowTop", showDepthMDTop.ToString("0"));
cXmlBase.setSelectedNodeChildNodeValue(pathSectionCss, sJH, "fShowBot", showDepthMDBot.ToString("0"));
this.DialogResult = DialogResult.OK;
this.Close();
}
else
{
MessageBox.Show("显示底深必须大于顶深。");
}
}
/// <summary>
/// 注意xtmFile
/// </summary>
/// <param name="xtlFileName">模板文件名，带扩展名</param>
/// <param name="goalFilePath">目标文件路径，全路径</param>
/// <param name="sJH"></param>
public static void copyTemplate(string xtlFileName, string goalFilePath, string sJH)
{
//加载模板
string xtmPath = Path.Combine(cProjectManager.dirPathTemplate, xtlFileName);
File.Copy(xtmPath, goalFilePath, true);
cXmlBase.setNodeInnerText(goalFilePath, cXmlDocSectionWell.fullPathJH, sJH);
cXmlBase.setNodeInnerText(goalFilePath, cXEWellPage.fullPathMapTitle, sJH);
//加载曲线数据
ItemWell curWell = cProjectData.ltProjectWell.FirstOrDefault(p => p.sJH == sJH);
foreach (XmlElement el_Track in cXmlDocSectionWell.getTrackNodes(goalFilePath))
{
trackDataDraw curTrackDraw = new trackDataDraw(el_Track);
//继续读取曲线,加载数据
if (curTrackDraw.sTrackType == TypeTrack.分层.ToString())
{
List <itemDrawDataIntervalValue> listDataItem = new List <itemDrawDataIntervalValue>();
//判断库中是否有相关数据，如果有数据的话，构建 listDataItem，然后导入
cIOinputLayerDepth cSelectLayerDepth = new cIOinputLayerDepth();
List <string> listStrLine = cSelectLayerDepth.selectSectionDrawData2List(sJH);
foreach (string sLine in listStrLine)
{
string[] splitLine = sLine.Split();
if (splitLine.Length >= 3)
{
itemDrawDataIntervalValue itemPro = new itemDrawDataIntervalValue();
itemPro.top = float.Parse(splitLine[0]);
itemPro.bot = float.Parse(splitLine[1]);
itemPro.sProperty = splitLine[2];
itemPro.calTVD(curWell);
listDataItem.Add(itemPro);
}
} //end 第一种类型
cXmlDocSectionWell.addDataItemListIntervaProperty(goalFilePath, curTrackDraw.sTrackID, listDataItem);
}
if (curTrackDraw.sTrackType == TypeTrack.测井解释.ToString())
{
List <itemDrawDataIntervalValue> listDataItem = new List <itemDrawDataIntervalValue>();
//判断库中是否有相关数据，如果有数据的话，构建 listDataItem，然后导入
cIOinputJSJL cSelectJSJL = new cIOinputJSJL();
List <string> listStrLine = cSelectJSJL.selectSectionDrawData2List(sJH);
foreach (string sLine in listStrLine)
{
string[] splitLine = sLine.Split();
if (splitLine.Length >= 3)
{
itemDrawDataIntervalValue itemPro = new itemDrawDataIntervalValue();
itemPro.top = float.Parse(splitLine[0]);
itemPro.bot = float.Parse(splitLine[1]);
itemPro.sProperty = splitLine[2];
itemPro.calTVD(curWell);
listDataItem.Add(itemPro);
}
} //end 第一种类型
cXmlDocSectionWell.addDataItemListIntervaProperty(goalFilePath, curTrackDraw.sTrackID, listDataItem);
}
} //end track loop
}
public static float getTVDByJHAndMD(ItemWell curWell, float fMD)
{
if (curWell != null)
{
return(getTVDByJHAndMD(curWell.sJH, fMD, curWell.WellPathList));
}
else
{
return(fMD);
}
}
void creatTemplat()
{
ItemWell itemWell = cProjectData.ltProjectWell.SingleOrDefault(p => p.sJH == this.sJHSelected);
if (itemWell != null)
{
dfDS2Show = itemWell.fWellBase;
}
//建立样式模板
cXmlDocSectionWell.generateXML(filePathOper, this.sJHSelected, dfDS1Show, dfDS2Show, fVscale);
addTrackCss(TypeTrack.深度尺);
}
public void calTVD(ItemWell curWell)
{
if (curWell == null)
{
topTVD = this.top;
botTVD = this.bot;
}
else
{
topTVD = cIOinputWellPath.getTVDByJHAndMD(curWell, this.top);
botTVD = cIOinputWellPath.getTVDByJHAndMD(curWell, this.bot);
}
}
public static List <wellDis> orderByWelldistance(string sJH)
{
List <string> listJH = new List <string>();
ItemWell currentWell = cProjectData.ltProjectWell.Find(p => p.sJH == sJH);
List <wellDis> ltWells = new List <wellDis>();
foreach (ItemWell item in cProjectData.ltProjectWell)
{
double dfDis = cCalDistance.calDistance2D(currentWell.dbX, currentWell.dbY, item.dbX, item.dbY);
wellDis newItem = new wellDis();
newItem.sJH = item.sJH;
newItem.distance = dfDis;
ltWells.Add(newItem);
}
return(ltWells.OrderBy(p => p.distance).ToList());
}
private void cbxShowWellBase_CheckedChanged(object sender, EventArgs e)
{
if (cbxShowWellBase.Checked == true)
{
ItemWell curWell = cProjectData.ltProjectWell.SingleOrDefault(p => p.sJH == sJH);
if (curWell != null)
{
if (rdbMD.Checked == true)
{
nUDShowedBottom.Value = (decimal)curWell.fWellBase;
}
if (rdbEle.Checked == true)
{
nUDShowedBottom.Value = (decimal)(-curWell.fWellBase + curWell.fKB);
}
}
}
}
private void webBrowserBody_DocumentCompleted(object sender, WebBrowserDocumentCompletedEventArgs e)
{
// 定位上次页面位置
htmlDocWebBody = webBrowserBody.Document;
if (htmlDocWebBody != null)
{
curPage.initial(this.filePathTemple);
fVscale = float.Parse(cXmlBase.getNodeInnerText(this.filePathTemple, cXEWellPage.fullPathVSacle));
string sJH = cXmlBase.getNodeInnerText(filePathTemple, cXmlDocSectionWell.fullPathJH);
curWell = cProjectData.ltProjectWell.FirstOrDefault(p => p.sJH == sJH);
if (webBrowserBody.Url == e.Url)
{
//记录元素的位置，实现刷新页面自动滚动
webBrowserBody.Document.Window.ScrollTo(PscrollOffset);
//Head 水平相同，
webBrowserHead.Document.Window.ScrollTo(PscrollOffset.X, 0);
}
//清除webHead的所有事件
if (htmlDocWebHead != null)
{
htmlDocWebHead.MouseMove -= htmlDocHead_MouseMove;
htmlDocWebHead.MouseDown -= htmlDocHead_MouseDown;
htmlDocWebHead.MouseUp -= htmlDocHead_MouseUp;
}
htmlDocWebBody.Window.DetachEventHandler("onscroll", OnScrollEventHandler);
htmlDocWebBody.Window.AttachEventHandler("onscroll", OnScrollEventHandler);
htmlDocWebBody.MouseMove -= htmlDocBody_MouseMove;
htmlDocWebBody.MouseMove += htmlDocBody_MouseMove;
htmlDocWebBody.MouseDown -= htmlDocBody_MouseDown;
htmlDocWebBody.MouseDown += htmlDocBody_MouseDown;
}
}
public static cSVGSectionWell makePathWell(cSVGDocSection svgSection, string pathSectionCss, string filePathTemplatOper, double dfDS1Show, double dfDS2Show, float fVScale, cXEGeopage curPage)
{
cSVGSectionWell wellGeoSingle = new cSVGSectionWell(svgSection.svgDoc);
List <int> iListTrackWidth = new List <int>();
//从配置文件读取显示深度
string sJH = cXmlBase.getNodeInnerText(filePathTemplatOper, cXmlDocSectionWell.fullPathJH);
//绝对值不放大fvscale，位置放大。
ItemWell wellItem = cProjectData.ltProjectWell.FirstOrDefault(p => p.sJH == sJH);
int iHeightMapTitle = int.Parse(cXmlBase.getNodeInnerText(filePathTemplatOper, cXEWellPage.fullPathMapTitleRectHeight));
int iHeightTrackHead = int.Parse(cXmlBase.getNodeInnerText(filePathTemplatOper, cXEWellPage.fullPathTrackRectHeight));
iListTrackWidth.Clear();
XmlElement returnElemment;
float dfDS1ShowTVD = cIOinputWellPath.getTVDByJHAndMD(wellItem, (float)dfDS1Show);
int iYpositionTrackHead = Convert.ToInt16(dfDS1ShowTVD * fVScale) - iHeightTrackHead;
foreach (XmlElement el_Track in cXmlDocSectionWell.getTrackNodes(filePathTemplatOper))
{
//初始化绘制道的基本信息
trackDataDraw curTrackDraw = new trackDataDraw(el_Track);
//增加道头
returnElemment = cSVGSectionTrack.trackHead(svgSection.svgDoc, curTrackDraw.sTrackID, curTrackDraw.sTrackTitle, iYpositionTrackHead, iHeightTrackHead, curTrackDraw.iTrackWidth, curTrackDraw.iTrackHeadFontSize, curTrackDraw.sWriteMode);
wellGeoSingle.addTrack(returnElemment, iListTrackWidth.Sum());
//增加距离位置节点
cXmlDocSectionGeo.addWellTrackXviewNode(pathSectionCss, sJH, curTrackDraw.sTrackID, iListTrackWidth.Sum());
//先画曲线，再画道头和道框，这样好看
#region 判断是否可见，可见才绘制
if (curTrackDraw.iVisible > 0)
{
#region 井深结构尺
if (el_Track["trackType"].InnerText == TypeTrack.深度尺.ToString())
{
itemDrawDataDepthRuler itemRuler = new itemDrawDataDepthRuler(el_Track);
//测试斜井gPathWellCone
returnElemment = cSVGSectionTrackWellRuler.gPathWellRuler(wellItem, svgSection, Convert.ToInt16(dfDS1Show), Convert.ToInt16(dfDS2Show), fVScale, itemRuler);
wellGeoSingle.addTrack(returnElemment, iListTrackWidth.Sum());
}
#endregion
#region 地层道
if (curTrackDraw.sTrackType == TypeTrack.分层.ToString())
{
XmlNode dataList = el_Track.SelectSingleNode("dataList");
if (dataList != null)
{
XmlNodeList dataItem = dataList.SelectNodes("dataItem");
foreach (XmlNode xn in dataItem)
{
ItemTrackDrawDataIntervalProperty item = new ItemTrackDrawDataIntervalProperty(xn);
if (item.top >= dfDS1Show && item.bot <= dfDS2Show)
{
returnElemment = cSVGSectionTrackLayer.gTrackItemTVDLayer(svgSection.svgDoc, item, fVScale, curTrackDraw.iTrackFontSize, curTrackDraw.iTrackWidth);
wellGeoSingle.addTrack(returnElemment, iListTrackWidth.Sum());
}
}
}
}
#endregion
#region 测井解释，旋回,化石道
if (cProjectManager.ltStrTrackTypeIntervalProperty.IndexOf(curTrackDraw.sTrackType) >= 0)
{
XmlNode dataList = el_Track.SelectSingleNode("dataList");
if (dataList != null)
{
XmlNodeList dataItem = dataList.SelectNodes("dataItem");
foreach (XmlNode xn in dataItem)
{
ItemTrackDrawDataIntervalProperty item = new ItemTrackDrawDataIntervalProperty(xn); if (item.top >= dfDS1Show && item.bot <= dfDS2Show)
{
returnElemment = cSVGSectionTrackJSJL.gTrackItemTVDJSJL(svgSection.svgDoc, svgSection.svgDefs, item, fVScale, curTrackDraw.iTrackWidth);
if (curTrackDraw.sTrackType == TypeTrack.沉积旋回.ToString())
{
returnElemment = cSVGSectionTrackCycle.gTrackItemTVDGeoCycle(svgSection.svgDoc, svgSection.svgDefs, item, fVScale, curTrackDraw.iTrackWidth);
}
// if (curTrackDraw.sTrackType == TypeTrack.描述.ToString()) returnElemment = cSVGSectionTrackDes.gTrackItemFossil(svgSection.svgDoc, svgSection.svgDefs, item, fVScale, curTrackDraw.iTrackWidth);
wellGeoSingle.addTrack(returnElemment, iListTrackWidth.Sum());
}
}
}
}
#endregion
#region 岩性
if (curTrackDraw.sTrackType == TypeTrack.岩性层段.ToString())
{
XmlNode dataList = el_Track.SelectSingleNode("dataList");
if (dataList != null)
{
XmlNodeList dataItem = dataList.SelectNodes("dataItem");
foreach (XmlNode xn in dataItem)
{
itemDrawDataIntervalValue item = new itemDrawDataIntervalValue(xn);
if (item.top >= dfDS1Show && item.bot <= dfDS2Show)
{
returnElemment = cSVGSectionTrackLitho.gTrackLithoTVDItem(wellItem, svgSection.svgDoc, svgSection.svgDefs, item, fVScale, curTrackDraw.iTrackWidth);
wellGeoSingle.addTrack(returnElemment, iListTrackWidth.Sum());
}
}
}
}
#endregion
#region 曲线道
List <itemLogHeadInforDraw> ltItemLogHeadInforDraw = new List <itemLogHeadInforDraw>(); //记录绘制道头用，节省重新读取的时间
if (curTrackDraw.sTrackType == TypeTrack.曲线道.ToString())
{
cSVGSectionTrackLogCurveFill.listLogViewData4fill.Clear();
XmlNodeList xnList = el_Track.SelectNodes(".//Log");
int iLogNum = 0;
bool bGrid = false; //记录网格是否绘制过。
foreach (XmlElement xnLog in xnList)
{
iLogNum++;
itemLogHeadInforDraw curLogHead = new itemLogHeadInforDraw(xnLog);
ltItemLogHeadInforDraw.Add(curLogHead);
if (curLogHead.iIsLog > 0)
{
if (curLogHead.fLeftValue <= 0)
{
curLogHead.fLeftValue = 1;
cXmlBase.setSelectedNodeChildNodeValue(filePathTemplatOper, "", "leftValue", "1");
}
curLogHead.iLogGridGrade = cSVGSectionTrackLog.getNumGridGroupInLog(curLogHead.fLeftValue, curLogHead.fRightValue);
}
//曲线是否可见
if (curLogHead.iLogCurveVisible > 0)
{
trackDataListLog dlTrackDataListLog = cSVGSectionTrackLog.getLogSeriersFromLogFile(sJH, curLogHead.sLogName, dfDS1Show, dfDS2Show);
//画曲线
returnElemment = cSVGSectionTrackLog.gTrackTVDLog(wellItem, svgSection.svgDoc, curLogHead, curTrackDraw.iTrackWidth, dlTrackDataListLog.fListMD, dlTrackDataListLog.fListValue, fVScale);
wellGeoSingle.addTrack(returnElemment, iListTrackWidth.Sum());
} //曲线可见
} //结束曲线循环
} //结束曲线if
#endregion 结束曲线道
#region 绘制测井图头,测井图信息很重要，图形加载数据要捕捉测井头的ID
if (curTrackDraw.sTrackType == TypeTrack.曲线道.ToString())
{
int iLogNum = 0;
foreach (itemLogHeadInforDraw curLogHead in ltItemLogHeadInforDraw)
{
iLogNum++;
if (curLogHead.iIsLog > 0)
{
if (curLogHead.fLeftValue <= 0)
{
curLogHead.fLeftValue = 1;
}
curLogHead.iLogGridGrade = cSVGSectionTrackLog.getNumGridGroupInLog(curLogHead.fLeftValue, curLogHead.fRightValue);
}
if (curLogHead.iLogCurveVisible > 0)
{
//增加测井头
int iHeadLogSize = 14;
returnElemment = cSVGSectionTrack.addTrackItemLogHeadInfor(svgSection.svgDoc, curLogHead, iYpositionTrackHead + iHeightTrackHead, iLogNum, curTrackDraw.iTrackWidth, iHeadLogSize);
wellGeoSingle.addTrack(returnElemment, iListTrackWidth.Sum());
}
}
}
#endregion
//绘制道框
if (curPage.iShowTrackRect == 1)
{
returnElemment = cSVGSectionTrack.trackRect(svgSection.svgDoc, curTrackDraw.sTrackID, dfDS1ShowTVD, dfDS2Show, fVScale, curTrackDraw.iTrackWidth);
wellGeoSingle.addTrack(returnElemment, iListTrackWidth.Sum());
}
iListTrackWidth.Add(curTrackDraw.iTrackWidth);
}
#endregion
} //end of for add track
//增加图头
returnElemment = wellGeoSingle.mapHeadTitle(sJH, iYpositionTrackHead - iHeightMapTitle, iYpositionTrackHead, iHeightMapTitle, iListTrackWidth.Sum(), iHeightMapTitle * 2 / 3);
wellGeoSingle.addTrack(returnElemment, 0);
return(wellGeoSingle);
}
public void readDataGridView2ListData(DataGridView dgv)
{
listDataItem.Clear();
ItemWell curWell = cProjectData.ltProjectWell.FirstOrDefault(p => p.sJH == this.sJH);
for (int i = 0; i < dgv.RowCount; i++)
{
bool bDataCorrect = true;
//根据不同类型赋缺省值
if (trackTypeStr == TypeTrack.符号.ToString())
{
if (dgv.Rows[i].Cells[2].Value == null)
{
dgv.Rows[i].Cells[2].Value = "半工字";
}
if (dgv.Rows[i].Cells[3].Value == null)
{
dgv.Rows[i].Cells[3].Value = " ";
}
}
for (int j = 0; j < dgv.ColumnCount; j++)
{
if (dgv.Rows[i].Cells[j].Value == null || dgv.Rows[i].Cells[j].Value.ToString() == "")
{
bDataCorrect = false;
break;
}
}
if (bDataCorrect == false)
{
//抛弃空值行
}
else if (trackTypeStr == TypeTrack.分层.ToString() ||
trackTypeStr == TypeTrack.测井解释.ToString() ||
trackTypeStr == TypeTrack.含油级别.ToString() ||
trackTypeStr == TypeTrack.沉积旋回.ToString() ||
trackTypeStr == TypeTrack.比例条.ToString()
)
{
itemDrawDataIntervalValue itemPro = new itemDrawDataIntervalValue();
itemPro.top = float.Parse(dgv.Rows[i].Cells[0].Value.ToString());
itemPro.bot = float.Parse(dgv.Rows[i].Cells[1].Value.ToString());
itemPro.sProperty = dgv.Rows[i].Cells[2].Value.ToString();
itemPro.calTVD(curWell);
listDataItem.Add(itemPro);
} //end 第一种类型
else if (trackTypeStr == TypeTrack.岩性层段.ToString() ||
trackTypeStr == TypeTrack.描述.ToString() ||
trackTypeStr == TypeTrack.符号.ToString()
)
{
itemDrawDataIntervalValue itemPro = new itemDrawDataIntervalValue();
itemPro.top = float.Parse(dgv.Rows[i].Cells[0].Value.ToString());
itemPro.bot = float.Parse(dgv.Rows[i].Cells[1].Value.ToString());
itemPro.sProperty = dgv.Rows[i].Cells[2].Value.ToString();
itemPro.sText = dgv.Rows[i].Cells[3].Value.ToString();
itemPro.calTVD(curWell);
listDataItem.Add(itemPro);
}
else if (trackTypeStr == TypeTrack.文本道.ToString())
{
itemDrawDataIntervalValue itemPro = new itemDrawDataIntervalValue();
itemPro.top = float.Parse(dgv.Rows[i].Cells[0].Value.ToString());
itemPro.bot = float.Parse(dgv.Rows[i].Cells[1].Value.ToString());
itemPro.sProperty = "none";
itemPro.sText = dgv.Rows[i].Cells[2].Value.ToString();
itemPro.calTVD(curWell);
listDataItem.Add(itemPro);
}
}
}
public static ItemDicWellPath getWellPathItemByJHAndMD(ItemWell curWell, float fMD) //算法需要验证和改进
{
return(getWellPathItemByJHAndMD(curWell.WellPathList, (float)fMD));
}
public ItemTrackDataIntervalProperty(ItemWell curWell) : this()
{
calTVD(curWell);
}