Exemplo n.º 1
0
 public void updateKhachHang(DTO_KhachHang kh)
 {
     try
     {
         SqlConnection con = DBConnect.Connect();
         SqlCommand    cmd = con.CreateCommand();
         cmd.CommandText = "suakhachhang";
         cmd.CommandType = CommandType.StoredProcedure;
         cmd.Parameters.Add(new SqlParameter {
             ParameterName = "makh", Value = kh.ID_KHACHHANG
         });
         cmd.Parameters.Add(new SqlParameter {
             ParameterName = "tenkh", Value = kh.HOTEN
         });
         cmd.Parameters.Add(new SqlParameter {
             ParameterName = "sdt", Value = kh.DIENTHOAI
         });
         cmd.Parameters.Add(new SqlParameter {
             ParameterName = "email", Value = kh.EMAIL
         });
         cmd.Parameters.Add(new SqlParameter {
             ParameterName = "loai", Value = kh.LOAI
         });
         cmd.ExecuteNonQuery();
         DBConnect.Close(con);
     }
     catch (Exception ex)
     {
         throw new Exception(ex.Message);
     }
 }
Exemplo n.º 2
0
        public DataTable getTenTrambyTuyen()
        {
            //tạo kết nối mới

            SqlConnection conn = DBConnect.Connect();

            //tạo command(select *....)
            SqlCommand cmd = conn.CreateCommand();

            //khai bao se dung store cho cmd
            cmd.CommandType = CommandType.StoredProcedure;
            cmd.CommandText = "getTenTrambyTuyen";

            //thuc thi cmd
            //khi dung datatable hoac dataset thi moi dung SQLdataAdapter
            //cmd.ExecuteNonQuery();//thuc thi tra ve so dong bi anh huong
            SqlDataAdapter da = new SqlDataAdapter(cmd);//thuc thi tra ve table
            DataTable      dt = new DataTable();

            //toàn bộ dữ liệu trong da se đổ (Fill) vao dt(dang table)
            da.Fill(dt);
            //
            DBConnect.Close(conn);
            return(dt);
        }
Exemplo n.º 3
0
        public DataTable GetTuyenById(DTO_TuyenXe tx)
        {
            //tạo kết nối mới

            SqlConnection conn = DBConnect.Connect();

            //tạo command(select *....)
            SqlCommand cmd = conn.CreateCommand();

            //khai bao se dung store cho cmd
            cmd.CommandType = CommandType.StoredProcedure;
            cmd.CommandText = "GetTuyenById";
            SqlParameter prm1 = new SqlParameter("@idTuyen", tx.ID_Tuyen);

            cmd.Parameters.Add(prm1);



            //thuc thi cmd
            //khi dung datatable hoac dataset thi moi dung SQLdataAdapter
            //cmd.ExecuteNonQuery();//thuc thi tra ve so dong bi anh huong
            SqlDataAdapter da = new SqlDataAdapter(cmd);//thuc thi tra ve table
            DataTable      dt = new DataTable();

            //toàn bộ dữ liệu trong da se đổ (Fill) vao dt(dang table)
            da.Fill(dt);
            //
            DBConnect.Close(conn);
            return(dt);
        }
Exemplo n.º 4
0
        public bool Update(DTO_TuyenXe tx)
        {
            try
            {
                SqlConnection conn = DBConnect.Connect();
                SqlCommand    cmd  = conn.CreateCommand();
                cmd.CommandType = CommandType.StoredProcedure;
                cmd.CommandText = "UpdateTuyenXe";


                SqlParameter Param1 = new SqlParameter("@idTuyen", tx.ID_Tuyen);
                SqlParameter Param2 = new SqlParameter("@khoangCach", tx.KhoangCach);
                SqlParameter Param3 = new SqlParameter("@thoiGianChay", tx.ThoiGianChay);
                SqlParameter Param4 = new SqlParameter("@tram_id_Tram1", tx.Tram_ID_Tram1);
                SqlParameter Param5 = new SqlParameter("@tram_id_Tram2", tx.Tram_ID_Tram);


                cmd.Parameters.Add(Param1);
                cmd.Parameters.Add(Param2);
                cmd.Parameters.Add(Param3);
                cmd.Parameters.Add(Param4);
                cmd.Parameters.Add(Param5);

                cmd.ExecuteNonQuery();
                DBConnect.Close(conn);
                return(true);
            }
            catch
            {
                return(false);
            }
        }
Exemplo n.º 5
0
        public DataTable ListChuyenDK(int tuyen, int chuyen, string loai)
        {
            SqlConnection conn = DBConnect.Connect();
            SqlCommand    cmd  = conn.CreateCommand();

            cmd.CommandType = CommandType.StoredProcedure;
            cmd.CommandText = "listChuyenDK";
            cmd.Parameters.Add(new SqlParameter {
                ParameterName = "Tuyen", Value = tuyen
            });
            cmd.Parameters.Add(new SqlParameter {
                ParameterName = "Chuyen", Value = chuyen
            });
            cmd.Parameters.Add(new SqlParameter {
                ParameterName = "Loai", Value = loai
            });

            SqlDataAdapter da = new SqlDataAdapter(cmd);

            da.Fill(dt);

            DBConnect.Close(conn);

            return(dt);
        }
Exemplo n.º 6
0
        //public DataTable updateTramDen(DTO_TuyenXe tx)
        //{
        //    SqlConnection conn = DBConnect.Connect();
        //    SqlCommand cmd = conn.CreateCommand();
        //    cmd.CommandType = CommandType.StoredProcedure;
        //    cmd.CommandText = "updateTramDen";
        //    SqlParameter prm1 = new SqlParameter("@id_Tuyen", tx.ID_Tuyen);
        //    SqlParameter prm2 = new SqlParameter("@id_TramDen", tx.Tram_ID_Tram);

        //    cmd.Parameters.Add(prm1);
        //    cmd.Parameters.Add(prm2);

        //    SqlDataAdapter da = new SqlDataAdapter(cmd);//thuc thi tra ve table
        //    DataTable dt = new DataTable();
        //    da.Fill(dt);
        //    DBConnect.Close(conn);
        //    return dt;
        //}

        public bool Insert(DTO_TuyenXe tx)
        {
            //tạo kết nối mới
            SqlConnection conn = DBConnect.Connect();
            //tạo command
            SqlCommand cmd = conn.CreateCommand();

            cmd.CommandType = CommandType.StoredProcedure;
            cmd.CommandText = "newTuyen";

            SqlParameter prm2 = new SqlParameter("@khoangCach", tx.KhoangCach);
            SqlParameter prm3 = new SqlParameter("@thoigianChay", tx.ThoiGianChay);
            SqlParameter prm4 = new SqlParameter("@tram_id_Tram1", tx.Tram_ID_Tram1);
            SqlParameter prm5 = new SqlParameter("@tram_id_Tram2", tx.Tram_ID_Tram);

            cmd.Parameters.Add(prm2);
            cmd.Parameters.Add(prm3);
            cmd.Parameters.Add(prm4);
            cmd.Parameters.Add(prm5);

            int row = cmd.ExecuteNonQuery();

            DBConnect.Close(conn);
            if (row > 0)
            {
                return(true);
            }
            return(false);
        }
Exemplo n.º 7
0
        public bool kiemTraTenTramInTuyen(DTO_TuyenXe tx)
        {
            SqlConnection conn = DBConnect.Connect();
            SqlCommand    cmd  = conn.CreateCommand();

            cmd.CommandType = CommandType.StoredProcedure;
            cmd.CommandText = "kiemTraTenTramInTuyen";

            SqlParameter prm1 = new SqlParameter("@id_TramDi", tx.Tram_ID_Tram1);
            SqlParameter prm2 = new SqlParameter("@id_TramDen", tx.Tram_ID_Tram);

            cmd.Parameters.Add(prm1);
            cmd.Parameters.Add(prm2);


            SqlDataAdapter da = new SqlDataAdapter(cmd);//thuc thi tra ve table
            DataTable      dt = new DataTable();

            da.Fill(dt);
            DBConnect.Close(conn);
            if (dt.Rows.Count > 0)
            {
                return(true);
            }
            return(false);
        }
Exemplo n.º 8
0
        public DataTable listChonGhe(int idTuyen, string ngayDi)
        {
            DataTable dt = new DataTable();

            try
            {
                SqlConnection conn = DBConnect.Connect();
                SqlCommand    cmd  = conn.CreateCommand();
                cmd.CommandType = CommandType.StoredProcedure;
                cmd.CommandText = "listChonGhe";

                cmd.Parameters.Add(new SqlParameter {
                    ParameterName = "idTuyen", Value = idTuyen
                });
                cmd.Parameters.Add(new SqlParameter {
                    ParameterName = "ngayKH", Value = ngayDi
                });


                SqlDataAdapter da = new SqlDataAdapter(cmd);
                da.Fill(dt);

                DBConnect.Close(conn);
                return(dt);
            }
            catch (Exception ex)
            {
                throw new Exception(ex.Message);
            }
        }
Exemplo n.º 9
0
        public bool deleteVe(int idVe)
        {
            try
            {
                SqlConnection conn = DBConnect.Connect();
                SqlCommand    cmd  = conn.CreateCommand();
                cmd.CommandType = CommandType.StoredProcedure;
                cmd.CommandText = "deleteVe";
                cmd.Parameters.Add(new SqlParameter {
                    ParameterName = "id", Value = idVe
                });

                int row = Convert.ToInt32(cmd.ExecuteNonQuery());
                DBConnect.Close(conn);

                if (row >= 1)
                {
                    return(true);
                }
                return(false);
            }
            catch (Exception ex)
            {
                throw new Exception(ex.Message);
            }
        }
Exemplo n.º 10
0
        public bool suaTram(DTO_Tram tram)
        {
            //tạo kết nối mới
            SqlConnection conn = DBConnect.Connect();
            //tạo command
            SqlCommand cmd = conn.CreateCommand();

            cmd.CommandType = CommandType.StoredProcedure;
            cmd.CommandText = "suaTram";

            SqlParameter prm1 = new SqlParameter("@id_Tram", tram.Id_Tram);
            SqlParameter prm2 = new SqlParameter("@ten_Tram", tram.Ten_Tram);
            SqlParameter prm3 = new SqlParameter("@dia_Diem", tram.Dia_Diem);

            cmd.Parameters.Add(prm1);
            cmd.Parameters.Add(prm2);
            cmd.Parameters.Add(prm3);

            int row = cmd.ExecuteNonQuery();

            DBConnect.Close(conn);
            if (row > 0)
            {
                return(true);
            }
            return(false);
        }
Exemplo n.º 11
0
        public bool checkExistsTenTramInTram(DTO_Tram tr)
        {
            SqlConnection conn = DBConnect.Connect();
            SqlCommand    cmd  = conn.CreateCommand();

            cmd.CommandType = CommandType.StoredProcedure;
            cmd.CommandText = "checkExistsTenTramInTram";

            SqlParameter prm1 = new SqlParameter("@tenTram", tr.Ten_Tram);
            SqlParameter prm2 = new SqlParameter("@diaDiem", tr.Dia_Diem);


            cmd.Parameters.Add(prm1);
            cmd.Parameters.Add(prm2);


            SqlDataAdapter da = new SqlDataAdapter(cmd);//thuc thi tra ve table
            DataTable      dt = new DataTable();

            da.Fill(dt);
            DBConnect.Close(conn);
            if (dt.Rows.Count > 0)
            {
                return(true);
            }
            return(false);
        }
Exemplo n.º 12
0
        public DataTable ListXe()
        {
            SqlConnection conn = DBConnect.Connect();
            SqlCommand    cmd  = conn.CreateCommand();

            cmd.CommandType = CommandType.StoredProcedure;
            cmd.CommandText = "listXe";
            SqlDataAdapter da = new SqlDataAdapter(cmd);

            da.Fill(dt);

            DBConnect.Close(conn);
            return(dt);
        }
Exemplo n.º 13
0
        public DataTable getTuyenIdTuyenByTuyen()
        {
            SqlConnection conn = DBConnect.Connect();
            SqlCommand    cmd  = conn.CreateCommand();

            cmd.CommandType = CommandType.StoredProcedure;
            cmd.CommandText = "getTuyenIDTuyenbyTuyen";

            SqlDataAdapter da = new SqlDataAdapter(cmd);//thuc thi tra ve table
            DataTable      dt = new DataTable();

            da.Fill(dt);
            DBConnect.Close(conn);
            return(dt);
        }
Exemplo n.º 14
0
        public DataTable getXeById(int id)
        {
            SqlConnection conn = DBConnect.Connect();
            SqlCommand    cmd  = conn.CreateCommand();

            cmd.CommandType = CommandType.StoredProcedure;
            cmd.CommandText = "getXeById";
            cmd.Parameters.Add(new SqlParameter {
                ParameterName = "id", Value = id
            });

            SqlDataAdapter da = new SqlDataAdapter(cmd);

            da.Fill(dt);

            DBConnect.Close(conn);
            return(dt);
        }
Exemplo n.º 15
0
        public bool newVe(DatVe ve)
        {
            try
            {
                SqlConnection conn = DBConnect.Connect();
                SqlCommand    cmd  = conn.CreateCommand();
                cmd.CommandType = CommandType.StoredProcedure;
                cmd.CommandText = "newVe";
                cmd.Parameters.Add(new SqlParameter {
                    ParameterName = "id_ghe", Value = ve.IDGhe
                });
                cmd.Parameters.Add(new SqlParameter {
                    ParameterName = "id_chuyen", Value = ve.IDChuyen
                });
                cmd.Parameters.Add(new SqlParameter {
                    ParameterName = "tinhTrang", Value = ve.TinhTrang
                });
                cmd.Parameters.Add(new SqlParameter {
                    ParameterName = "giaTien", Value = ve.GiaTien
                });
                cmd.Parameters.Add(new SqlParameter {
                    ParameterName = "id_KhachHang", Value = ve.IDKhachHang
                });
                cmd.Parameters.Add(new SqlParameter {
                    ParameterName = "ngayXuatVe", Value = ve.NgayXuatVe
                });
                cmd.Parameters.Add(new SqlParameter {
                    ParameterName = "ghiChu", Value = ve.GhiChu
                });

                int newID = cmd.ExecuteNonQuery();
                DBConnect.Close(conn);

                if (newID > 0)
                {
                    return(true);
                }
                return(false);
            }
            catch (Exception ex)
            {
                throw new Exception(ex.Message);
            }
        }
Exemplo n.º 16
0
 public void deleteKhachHang(int id)
 {
     try
     {
         SqlConnection con = DBConnect.Connect();
         SqlCommand    cmd = con.CreateCommand();
         cmd.CommandType = CommandType.StoredProcedure;
         cmd.CommandText = "xoakhachhang";
         cmd.Parameters.Add(new SqlParameter {
             ParameterName = "makh", Value = id
         });
         cmd.ExecuteNonQuery();
         DBConnect.Close(con);
     }
     catch (Exception ex)
     {
         throw new Exception(ex.Message);
     }
 }
Exemplo n.º 17
0
        public DataTable listChuyen()
        {
            //tạo Sqlconnection để connect
            SqlConnection conn = DBConnect.Connect();
            //tạo cmd để chứ câu truy vấn vào csdl
            SqlCommand cmd = conn.CreateCommand();

            //cài đặt cmd để truy vấn các stored Procedure
            cmd.CommandType = CommandType.StoredProcedure;
            //Đưa tên Procedure vào cmd text
            cmd.CommandText = "listChuyen";

            SqlDataAdapter da = new SqlDataAdapter(cmd);

            da.Fill(dt);

            DBConnect.Close(conn);

            return(dt);
        }
Exemplo n.º 18
0
        public bool xoaTram(DTO_Tram tram)
        {
            SqlConnection conn = DBConnect.Connect();
            SqlCommand    cmd  = conn.CreateCommand();

            cmd.CommandType = CommandType.StoredProcedure;
            cmd.CommandText = "xoaTram";

            SqlParameter Param1 = new SqlParameter("@id_Tram", tram.Id_Tram);

            cmd.Parameters.Add(Param1);
            int row = cmd.ExecuteNonQuery();

            DBConnect.Close(conn);
            if (row > 0)
            {
                return(true);
            }
            return(false);
        }
Exemplo n.º 19
0
        public bool InsertTramTG(DTO_TramTrungGian tramTG)
        {
            SqlConnection conn = DBConnect.Connect();
            SqlCommand    cmd  = conn.CreateCommand();

            cmd.CommandType = CommandType.StoredProcedure;
            cmd.CommandText = "InsertTramTrungGian";
            SqlParameter prm1 = new SqlParameter("@id_Tuyen", tramTG.TuyenIDTuyen);
            SqlParameter prm2 = new SqlParameter("@id_Tram", tramTG.TramIDTram);

            cmd.Parameters.Add(prm1);
            cmd.Parameters.Add(prm2);
            int row = cmd.ExecuteNonQuery();

            DBConnect.Close(conn);
            if (row > 0)
            {
                return(true);
            }
            return(false);
        }
Exemplo n.º 20
0
        public DataTable getTenTrambyTuyen()
        {
            DataTable dt = new DataTable();

            try
            {
                SqlConnection conn = DBConnect.Connect();
                SqlCommand    cmd  = conn.CreateCommand();
                cmd.CommandType = CommandType.StoredProcedure;
                cmd.CommandText = "getTenTrambyTuyen";

                SqlDataAdapter da = new SqlDataAdapter(cmd);
                da.Fill(dt);

                DBConnect.Close(conn);
                return(dt);
            } catch (Exception ex)
            {
                throw new Exception(ex.Message);
            }
        }
Exemplo n.º 21
0
        public DataTable ListChuyenSearch(string tu, string den)
        {
            SqlConnection conn = DBConnect.Connect();
            SqlCommand    cmd  = conn.CreateCommand();

            cmd.CommandType = CommandType.StoredProcedure;
            cmd.CommandText = "listChuyenSearch";
            cmd.Parameters.Add(new SqlParameter {
                ParameterName = "Tu", Value = tu
            });
            cmd.Parameters.Add(new SqlParameter {
                ParameterName = "Den", Value = den
            });

            SqlDataAdapter da = new SqlDataAdapter(cmd);

            da.Fill(dt);

            DBConnect.Close(conn);

            return(dt);
        }
Exemplo n.º 22
0
        public bool UpdateChuyen(DTO_Chuyen c)
        {
            try {
                SqlConnection conn = DBConnect.Connect();
                SqlCommand    cmd  = conn.CreateCommand();
                cmd.CommandType = CommandType.StoredProcedure;
                cmd.CommandText = "updateChuyen";
                cmd.Parameters.Add(new SqlParameter {
                    ParameterName = "ID_Chuyen", Value = c.ID_Chuyen
                });
                cmd.Parameters.Add(new SqlParameter {
                    ParameterName = "Tuyen", Value = c.Tuyen_ID_Tuyen
                });
                cmd.Parameters.Add(new SqlParameter {
                    ParameterName = "GKH", Value = c.Gio_khoi_hanh
                });
                cmd.Parameters.Add(new SqlParameter {
                    ParameterName = "Ghichu", Value = c.Ghi_chu
                });
                cmd.Parameters.Add(new SqlParameter {
                    ParameterName = "Xe", Value = c.Xe_XeID
                });
                cmd.Parameters.Add(new SqlParameter {
                    ParameterName = "TaiXe", Value = c.Tai_xe_ID_TaiXe
                });
                int row = cmd.ExecuteNonQuery();
                DBConnect.Close(conn);

                if (row > 0)
                {
                    return(true);
                }
                return(false);
            }
            catch (Exception ex)
            {
                throw new Exception(ex.Message);
            }
        }
Exemplo n.º 23
0
        public int insertKhachHang(DTO_KhachHang kh)
        {
            try
            {
                SqlConnection conn = DBConnect.Connect();
                SqlCommand    cmd  = conn.CreateCommand();
                cmd.CommandText = "themkhachhang";
                cmd.CommandType = CommandType.StoredProcedure;
                cmd.Parameters.Add(new SqlParameter {
                    ParameterName = "tenkh", Value = kh.HOTEN
                });
                cmd.Parameters.Add(new SqlParameter {
                    ParameterName = "sdt", Value = kh.DIENTHOAI
                });
                cmd.Parameters.Add(new SqlParameter {
                    ParameterName = "email", Value = kh.EMAIL
                });
                cmd.Parameters.Add(new SqlParameter {
                    ParameterName = "loai", Value = kh.LOAI
                });
                //cmd.ExecuteNonQuery();

                // return ID after inserted
                int newID = Convert.ToInt32(cmd.ExecuteScalar());
                DBConnect.Close(conn);

                if (newID > 0)
                {
                    return(newID);
                }
                return(0);
            }

            catch (Exception ex)
            {
                throw new Exception(ex.Message);
            }
        }
Exemplo n.º 24
0
        public DataTable timKhachHangTheoSDTVaTen(string ma)
        {
            try
            {
                SqlConnection conn = DBConnect.Connect();
                SqlCommand    cmd  = conn.CreateCommand();
                cmd.CommandType = CommandType.StoredProcedure;
                cmd.CommandText = "timkhachhangtheotenhoacsdt";
                cmd.Parameters.Add(new SqlParameter {
                    ParameterName = "ma", Value = ma
                });

                SqlDataAdapter da = new SqlDataAdapter(cmd);
                DataTable      dt = new DataTable();
                da.Fill(dt);
                DBConnect.Close(conn);
                return(dt);
            }
            catch (Exception ex)
            {
                throw new Exception(ex.Message);
            }
        }
Exemplo n.º 25
0
        public bool Delete(DTO_TuyenXe tx)
        {
            //tạo kết nối mới
            SqlConnection conn = DBConnect.Connect();
            //tạo command(select *....)
            SqlCommand cmd = conn.CreateCommand();

            cmd.CommandType = CommandType.StoredProcedure;
            cmd.CommandText = "DeleteTuyenXe";
            SqlParameter Param1 = new SqlParameter("@idTuyen", tx.ID_Tuyen);

            cmd.Parameters.Add(Param1);

            int row = cmd.ExecuteNonQuery();

            DBConnect.Close(conn);

            if (row > 0)
            {
                return(true);
            }
            return(false);
        }
Exemplo n.º 26
0
        public DataTable ListKhachHangTheoTen(DTO_KhachHang khachhang)
        {
            try
            {
                SqlConnection conn = DBConnect.Connect();
                SqlCommand    cmd  = conn.CreateCommand();
                cmd.CommandType = CommandType.StoredProcedure;
                cmd.CommandText = "timKhachHangTheoTen";
                cmd.Parameters.Add(new SqlParameter {
                    ParameterName = "ten", Value = khachhang.HOTEN
                });

                SqlDataAdapter da = new SqlDataAdapter(cmd);
                DataTable      dt = new DataTable();
                da.Fill(dt);

                DBConnect.Close(conn);
                return(dt);
            }
            catch (Exception ex)
            {
                throw new Exception(ex.Message);
            }
        }
Exemplo n.º 27
0
        public DataTable getGheById(int id)
        {
            DataTable dt = new DataTable();

            try
            {
                SqlConnection conn = DBConnect.Connect();
                SqlCommand    cmd  = conn.CreateCommand();
                cmd.CommandType = CommandType.StoredProcedure;
                cmd.CommandText = "getGheById";
                cmd.Parameters.Add(new SqlParameter {
                    ParameterName = "id", Value = id
                });

                SqlDataAdapter da = new SqlDataAdapter(cmd);
                da.Fill(dt);

                DBConnect.Close(conn);
                return(dt);
            } catch (Exception ex)
            {
                throw new Exception(ex.Message);
            }
        }
Exemplo n.º 28
0
 public bool DeleteChuyen(int ID_Chuyen)
 {
     try
     {
         SqlConnection conn = DBConnect.Connect();
         SqlCommand    cmd  = conn.CreateCommand();
         cmd.CommandType = CommandType.StoredProcedure;
         cmd.CommandText = "deleteChuyen";
         cmd.Parameters.Add(new SqlParameter {
             ParameterName = "ID_Chuyen", Value = ID_Chuyen
         });
         int row = cmd.ExecuteNonQuery();
         DBConnect.Close(conn);
         if (row > 0)
         {
             return(true);
         }
         return(false);
     }
     catch (Exception ex)
     {
         throw new Exception(ex.Message);
     }
 }