protected virtual void InitializeDockingControls( )
{
// Create the docking manager
m_DockingManager = new DockingManager( this, VisualStyle.IDE );
m_DockingManager.InnerControl = display;
m_DockingManager.OuterControl = statusStrip;
// Add log, property editor, and edit mode controls to the docking manager
m_LogDisplayContent = m_DockingManager.Contents.Add( m_LogDisplay, "Log" );
m_PropertyEditorContent = m_DockingManager.Contents.Add( new ObjectPropertyEditor( ), "Property Editor" );
m_SelectionContent = m_DockingManager.Contents.Add( new SelectionControl( ), "Selection" );
m_DockingManager.AddContentWithState( m_LogDisplayContent, State.DockBottom );
m_DockingManager.AddContentWithState( m_SelectionContent, State.DockRight );
m_DockingManager.AddContentWithState( m_PropertyEditorContent, State.DockLeft );
m_EditModesContent = m_DockingManager.Contents.Add( new EditModesControl( ), Resources.EditModes );
m_DockingManager.AddContentToZone( m_EditModesContent, m_SelectionContent.ParentWindowContent.ParentZone, 0 );
}
public MainForm(string strOpenFileName)
{
//
// Required for Windows Form Designer support
//
InitializeComponent();
m_dkm = new DockingManager(this, VisualStyle.IDE);
Globals.ActiveDocumentChanged += new EventHandler(OnActiveDocumentChanged);
m_doc = Globals.ActiveDocument;
Globals.MainForm = this;
// Create all the "Contents" used to display the various animation components
m_ctlPreviewPanel = new PreviewPanel(m_doc);
Globals.PreviewControl = m_ctlPreviewPanel.PreviewControl;
m_ctlPreviewPanel.Dock = DockStyle.Fill;
Controls.Add(m_ctlPreviewPanel);
m_dkm.InnerControl = m_ctlPreviewPanel;
m_frmStrips = new StripsForm(m_doc);
Globals.StripsForm = m_frmStrips;
m_tntStrips = m_dkm.Contents.Add(m_frmStrips, m_frmStrips.Text);
m_tntStrips.DisplaySize = new Size(ClientSize.Width / 4, ClientSize.Height / 2);
m_wcStrips = m_dkm.AddContentWithState(m_tntStrips, State.DockLeft);
m_frmBitmaps = new BitmapsForm(m_doc);
m_tntBitmaps = m_dkm.Contents.Add(m_frmBitmaps, m_frmBitmaps.Text);
m_tntBitmaps.DisplaySize = new Size(ClientSize.Width / 4, ClientSize.Height / 2);
m_dkm.AddContentWithState(m_tntBitmaps, State.DockTop);
// Add the Bitmaps form to the StripForm's Zone
m_dkm.AddContentToZone(m_tntBitmaps, m_wcStrips.ParentZone, 1);
m_frmFrames = new StripForm(m_doc);
Globals.StripForm = m_frmFrames;
m_tntFrames = m_dkm.Contents.Add(m_frmFrames, m_frmFrames.Text);
m_frmFrames.Content = m_tntFrames;
int cx = ClientSize.Width - (ClientSize.Width / 4);
int cy = ClientSize.Height / 3;
m_tntFrames.DisplaySize = new Size(cx, cy);
m_dkm.AddContentWithState(m_tntFrames, State.DockBottom);
m_frmCombiner = new CombinerForm();
m_tntCombiner = m_dkm.Contents.Add(m_frmCombiner, m_frmCombiner.Text);
m_tntCombiner.DisplaySize = new Size(ClientSize.Width / 2, ClientSize.Height / 2);
// m_dkm.AddContentWithState(m_tntCombiner, State.Floating);
// m_dkm.HideContent(m_tntCombiner);
// Do a little wiring
((StripControl)Globals.StripControl).FrameOffsetChanged +=
new FrameOffsetEventHandler(((PreviewControl)Globals.PreviewControl).OnFrameOffsetChanged);
((PreviewControl)Globals.PreviewControl).FrameOffsetChanged +=
new FrameOffsetEventHandler(((StripControl)Globals.StripControl).OnFrameOffsetChanged);
// We always have a document around
if (strOpenFileName == null)
NewDocument();
else
OpenDocument(strOpenFileName);
}
public override void PerformRestore(DockingManager dm)
{
int count = dm.Container.Controls.Count;
int min = -1;
int max = count;
if (dm.InnerControl != null)
min = dm.Container.Controls.IndexOf(dm.InnerControl);
if (dm.OuterControl != null)
max = dm.OuterControlIndex();
int beforeIndex = -1;
int afterIndex = max;
int beforeAllIndex = -1;
int afterAllIndex = max;
// Create a collection of the Zones in the appropriate direction
for(int index=0; index<count; index++)
{
Zone z = dm.Container.Controls[index] as Zone;
if (z != null)
{
StringCollection sc = ZoneHelper.ContentNames(z);
if (_state == z.State)
{
if (sc.Contains(_best))
{
// Can we delegate to a child Restore object
if (_child != null)
_child.PerformRestore(z);
else
{
// Just add an appropriate Window to start of the Zone
dm.AddContentToZone(_content, z, 0);
}
return;
}
// If the WindowContent contains a Content previous to the target
if (sc.Contains(_previous))
{
if (index > beforeIndex)
beforeIndex = index;
}
// If the WindowContent contains a Content next to the target
if (sc.Contains(_next))
{
if (index < afterIndex)
afterIndex = index;
}
}
else
{
// If the WindowContent contains a Content previous to the target
if (sc.Contains(_previousAll))
{
if (index > beforeAllIndex)
beforeAllIndex = index;
}
// If the WindowContent contains a Content next to the target
if (sc.Contains(_nextAll))
{
if (index < afterAllIndex)
afterAllIndex = index;
}
}
}
}
dm.Container.SuspendLayout();
// Create a new Zone with correct State
Zone newZ = dm.CreateZoneForContent(_state);
// Restore the correct content size/location values
_content.DisplaySize = _size;
_content.DisplayLocation = _location;
// Add an appropriate Window to start of the Zone
dm.AddContentToZone(_content, newZ, 0);
// Did we find a valid 'before' Zone?
if (beforeIndex != -1)
{
// Try and place more accurately according to other edge Zones
if (beforeAllIndex > beforeIndex)
beforeIndex = beforeAllIndex;
// Check against limits
if (beforeIndex >= max)
beforeIndex = max - 1;
dm.Container.Controls.SetChildIndex(newZ, beforeIndex + 1);
}
else
{
// Try and place more accurately according to other edge Zones
if (afterAllIndex < afterIndex)
afterIndex = afterAllIndex;
// Check against limits
if (afterIndex <= min)
afterIndex = min + 1;
if (afterIndex > min)
dm.Container.Controls.SetChildIndex(newZ, afterIndex);
else
{
// Set the Zone to be the least important of our Zones
dm.ReorderZoneToInnerMost(newZ);
}
}
dm.Container.ResumeLayout();
}
/// <summary>
/// 为设计器添加可停靠窗口
/// </summary>
private void AddDockingManagers()
{
dockManager = new DockingManager(this, VisualStyle.IDE);
//定义对象OuterControl，Docking Manager不会关注该对象以后生成的对象的窗口区域
//对象InnerControl，Docking Manager不会关注在该对象生成以前的对象的窗口区域
dockManager.OuterControl = this.toolStripOperation;
dockManager.InnerControl = this.ViewDesign;
//添加可隐藏的控件模块库窗口
this.tabSolution_Controls = new Content(this.dockManager);
this.tabSolution_Controls.Control = this.toolboxServiceImpl;
this.tabSolution_Controls.FullTitle = "控制模块库";
this.tabSolution_Controls.Title = "控制模块库";
this.tabSolution_Controls.AutoHideSize = this.toolboxServiceImpl.Size;
this.tabSolution_Controls.DisplaySize = this.toolboxServiceImpl.Size;
dockManager.Contents.Add(this.tabSolution_Controls);
dockManager.AddContentWithState(this.tabSolution_Controls, State.DockLeft);
//添加可隐藏的属性设计窗口
this.tabSolution_Property = new Content(this.dockManager);
this.tabSolution_Property.Control = this.controlfilteredPropertyGrid;
this.tabSolution_Property.FullTitle = "模块属性";
this.tabSolution_Property.Title = "模块属性";
this.tabSolution_Property.AutoHideSize = this.controlfilteredPropertyGrid.Size;
this.tabSolution_Property.DisplaySize = this.controlfilteredPropertyGrid.Size;
this.tabSolution_Property.DisplayLocation =
new Point(this.Location.X + this.Width - 200, this.Location.Y + 100);
this.tabSolution_Property.FloatingSize = this.controlfilteredPropertyGrid.Size;
dockManager.Contents.Add(this.tabSolution_Property);
dockManager.AddContentWithState(this.tabSolution_Property, State.Floating);
//添加可隐藏的资源管理器窗口
this.tabSolution_TreeView = new Content(this.dockManager);
this.tabSolution_TreeView.Control = this.solutionTreeView;
this.tabSolution_TreeView.FullTitle = "资源管理器";
this.tabSolution_TreeView.Title = "资源管理器";
this.tabSolution_TreeView.AutoHideSize = this.solutionTreeView.Size;
this.tabSolution_TreeView.DisplaySize = this.solutionTreeView.Size;
//添加可隐藏的工程管理器窗口
this.tabSolution_ListBox = new Content(dockManager);
this.tabSolution_ListBox.Control = this.ProListBox;
this.tabSolution_ListBox.FullTitle = "工程管理器";
this.tabSolution_ListBox.Title = "工程管理器";
this.tabSolution_ListBox.AutoHideSize = this.ProListBox.Size;
this.tabSolution_ListBox.DisplaySize = this.ProListBox.Size;
Zone zone = dockManager.CreateZoneForContent(State.DockRight);
dockManager.ReorderZoneToInnerMost(zone);
dockManager.Contents.Add(this.tabSolution_ListBox);
dockManager.AddContentToZone(this.tabSolution_ListBox, zone, 0);
dockManager.Contents.Add(this.tabSolution_TreeView);
dockManager.AddContentToZone(this.tabSolution_TreeView, zone, 1);
//添加可隐藏的错误列表窗口
this.tabSolution_ErrorBox = new Content(this.dockManager);
this.tabSolution_ErrorBox.Control = this.errorForm;
this.tabSolution_ErrorBox.FullTitle = "错误列表";
this.tabSolution_ErrorBox.Title = "错误列表";
this.tabSolution_ErrorBox.AutoHideSize = this.errorForm.Size;
this.tabSolution_ErrorBox.DisplaySize = this.errorForm.Size;
this.dockManager.Contents.Add(this.tabSolution_ErrorBox);
this.dockManager.AddContentWithState(this.tabSolution_ErrorBox, State.DockBottom);
//为隐藏窗口添加关闭事件处理函数，当隐藏窗口关闭时设置响应窗口状态栏的状态
this.dockManager.ContentHidden +=
new DockingManager.ContentHandler(dockingManager_Controls_ContentHidden);
}
