public void Test_DiscontinueProcedure()
{
Order order = TestOrderFactory.CreateOrder(1, 3, true);
// copy req procs to a list so we can access them by index
List <Procedure> reqProcs = new List <Procedure>(
new TypeSafeEnumerableWrapper <Procedure>(order.Procedures));
Procedure rp1 = reqProcs[0];
// put one mps in progress and the other completed, leaving the third scheduled
rp1.ModalityProcedureSteps[0].Start(TestStaffFactory.CreateStaff(new StaffTypeEnum("STEC", null, null)));
rp1.ModalityProcedureSteps[1].Complete(TestStaffFactory.CreateStaff(new StaffTypeEnum("STEC", null, null)));
// discontinue rp1
rp1.Discontinue();
CheckStatus(ProcedureStatus.DC, rp1);
Assert.IsNotNull(rp1.StartTime);
Assert.IsNotNull(rp1.EndTime);
// expect scheduled step was discontinued
CheckStatus(ActivityStatus.DC, rp1.ModalityProcedureSteps[2]);
Assert.IsNull(rp1.ModalityProcedureSteps[2].StartTime);
Assert.IsNotNull(rp1.ModalityProcedureSteps[2].EndTime);
// expect in-progress step was discontinued
CheckStatus(ActivityStatus.DC, rp1.ModalityProcedureSteps[0]);
Assert.IsNotNull(rp1.ModalityProcedureSteps[0].StartTime);
Assert.IsNotNull(rp1.ModalityProcedureSteps[0].EndTime);
// expect completed steps unchanged
CheckStatus(ActivityStatus.CM, rp1.ModalityProcedureSteps[1]);
Assert.IsNotNull(rp1.ModalityProcedureSteps[1].StartTime);
Assert.IsNotNull(rp1.ModalityProcedureSteps[1].EndTime);
}
public void Test_AutoDiscontinueOrder()
{
Order order = TestOrderFactory.CreateOrder(2, 2, true);
// copy req procs to a list so we can access them by index
List <Procedure> reqProcs = new List <Procedure>(
new TypeSafeEnumerableWrapper <Procedure>(order.Procedures));
Procedure rp1 = reqProcs[0];
Procedure rp2 = reqProcs[1];
// start and discontinue rp1
rp1.ModalityProcedureSteps[0].Start(TestStaffFactory.CreateStaff(new StaffTypeEnum("STEC", null, null)));
rp1.Discontinue();
Assert.IsNotNull(rp1.StartTime);
Assert.IsNotNull(rp1.EndTime);
// cancel rp2
rp2.Cancel();
Assert.IsNull(rp2.StartTime);
Assert.IsNotNull(rp2.EndTime);
// order should be discontinued
CheckStatus(OrderStatus.DC, order);
Assert.IsNotNull(order.StartTime);
Assert.IsNotNull(order.EndTime);
}
public void Test_CompleteProcedureStepFromInProgress()
{
Order order = TestOrderFactory.CreateOrder(1, 1, true);
Procedure rp1 = CollectionUtils.FirstElement(order.Procedures);
ModalityProcedureStep mps1 = rp1.ModalityProcedureSteps[0];
CheckStatus(ActivityStatus.SC, mps1);
mps1.Start(TestStaffFactory.CreateStaff(new StaffTypeEnum("STEC", null, null)));
CheckStatus(ActivityStatus.IP, mps1);
mps1.Complete();
CheckStatus(ActivityStatus.CM, mps1);
Assert.IsNotNull(mps1.StartTime);
Assert.IsNotNull(mps1.EndTime);
CheckStatus(ProcedureStatus.IP, rp1);
Assert.IsNotNull(rp1.StartTime);
Assert.IsNull(rp1.EndTime);
CheckStatus(OrderStatus.IP, order);
Assert.IsNotNull(order.StartTime);
Assert.IsNull(order.EndTime);
}
public void Test_DiscontinueOrder()
{
Order order = TestOrderFactory.CreateOrder(2, 2, true);
// copy req procs to a list so we can access them by index
List <Procedure> reqProcs = new List <Procedure>(
new TypeSafeEnumerableWrapper <Procedure>(order.Procedures));
Procedure rp1 = reqProcs[0];
Procedure rp2 = reqProcs[1];
// start rp 1
rp1.ModalityProcedureSteps[0].Start(TestStaffFactory.CreateStaff(new StaffTypeEnum("SCLR", null, null)));
order.Discontinue(new OrderCancelInfo(_defaultCancelReason, TestStaffFactory.CreateStaff(new StaffTypeEnum("SCLR", null, null)), "", null));
// rp 2 is canceled
CheckStatus(ProcedureStatus.CA, rp2);
Assert.IsNull(rp2.StartTime); // rp2 was never started
Assert.IsNotNull(rp2.EndTime);
// rp 1 is discontinued
CheckStatus(ProcedureStatus.DC, rp1);
Assert.IsNotNull(rp1.StartTime);
Assert.IsNotNull(rp1.EndTime);
// order is discontinued
CheckStatus(OrderStatus.DC, order);
Assert.IsNotNull(order.StartTime);
Assert.IsNotNull(order.EndTime); // end-time is set because order is discontinued, even though rp1 is still in progress
}
public void Test_ReplaceOrderFromScheduled()
{
Order order = TestOrderFactory.CreateOrder(2, 2, true);
CheckStatus(OrderStatus.SC, order);
Order replacement = TestOrderFactory.CreateOrder(2, 2, true);
order.Cancel(new OrderCancelInfo(_defaultCancelReason, TestStaffFactory.CreateStaff(new StaffTypeEnum("SCLR", null, null)), "", replacement));
CheckStatus(OrderStatus.RP, order);
Assert.IsNull(order.StartTime);
Assert.IsNotNull(order.EndTime);
foreach (Procedure rp in order.Procedures)
{
CheckStatus(ProcedureStatus.CA, rp);
Assert.IsNull(rp.StartTime);
Assert.IsNotNull(rp.EndTime);
foreach (ProcedureStep step in rp.ProcedureSteps)
{
CheckStatus(ActivityStatus.DC, step);
}
}
}
public void Test_CancelOrderWithCancelledProcedure()
{
Order order = TestOrderFactory.CreateOrder(2, 2, true);
CheckStatus(OrderStatus.SC, order);
// cancel one of the procedures - this will not cancel the order
Procedure p1 = CollectionUtils.FirstElement(order.Procedures);
p1.Cancel();
// order is still scheduled
CheckStatus(OrderStatus.SC, order);
// now cancel order
order.Cancel(new OrderCancelInfo(_defaultCancelReason, TestStaffFactory.CreateStaff(new StaffTypeEnum("SCLR", null, null)), "", null));
CheckStatus(OrderStatus.CA, order);
Assert.IsNull(order.StartTime);
Assert.IsNotNull(order.EndTime);
foreach (Procedure rp in order.Procedures)
{
CheckStatus(ProcedureStatus.CA, rp);
Assert.IsNull(rp.StartTime);
Assert.IsNotNull(rp.EndTime);
foreach (ProcedureStep step in rp.ProcedureSteps)
{
CheckStatus(ActivityStatus.DC, step);
}
}
}
public void Test_Test_AutoCompleteOrderProcedure()
{
Order order = TestOrderFactory.CreateOrder(2, 1, true);
// copy req procs to a list so we can access them by index
List <Procedure> reqProcs = new List <Procedure>(
new TypeSafeEnumerableWrapper <Procedure>(order.Procedures));
Procedure rp1 = reqProcs[0];
Procedure rp2 = reqProcs[1];
// cancel rp2
rp2.Cancel();
// complete rp1 and publish it
rp1.ModalityProcedureSteps[0].Complete(TestStaffFactory.CreateStaff(new StaffTypeEnum("STEC", null, null)));
PublicationStep pub1 = new PublicationStep();
pub1.ReportPart = new ReportPart(new Report(), 0); // must have a report part or we get null-ref exception
rp1.AddProcedureStep(pub1);
pub1.Complete(TestStaffFactory.CreateStaff(new StaffTypeEnum("PRAD", null, null)));
CheckStatus(ProcedureStatus.CA, rp2);
Assert.IsNull(rp2.StartTime);
Assert.IsNotNull(rp2.EndTime);
CheckStatus(ProcedureStatus.CM, rp1);
Assert.IsNotNull(rp1.StartTime);
Assert.IsNotNull(rp1.EndTime);
CheckStatus(OrderStatus.CM, order);
Assert.IsNotNull(rp1.StartTime);
Assert.IsNotNull(rp1.EndTime);
}
public void Test_merge_order()
{
var patient = TestPatientFactory.CreatePatient();
var visit = TestVisitFactory.CreateVisit(patient);
var facility = TestFacilityFactory.CreateFacility();
var order1 = TestOrderFactory.CreateOrder(patient, visit, facility, "101", 2, 1, true, true);
var order2 = TestOrderFactory.CreateOrder(patient, visit, facility, "102", 2, 1, true, true);
var staff = TestStaffFactory.CreateStaff();
// merge order1 into order2
order1.Merge(new OrderMergeInfo(staff, DateTime.Now, order2));
// order1 post conditions
Assert.AreEqual(OrderStatus.MG, order1.Status);
Assert.IsNotNull(order1.MergeInfo);
Assert.AreEqual(order2, order1.MergeInfo.MergeDestinationOrder);
Assert.AreEqual(staff, order1.MergeInfo.MergedBy);
Assert.AreEqual(2, order1.Procedures.Count);
Assert.IsTrue(CollectionUtils.TrueForAll(order1.Procedures, p => p.Status == ProcedureStatus.GH));
// order2 post conditions
Assert.AreEqual(OrderStatus.SC, order2.Status);
Assert.IsNull(order2.MergeInfo);
Assert.AreEqual(4, order2.Procedures.Count);
Assert.IsTrue(CollectionUtils.TrueForAll(order1.Procedures, p => p.Status == ProcedureStatus.SC));
}
public void Test_AutoCancelOrder()
{
Order order = TestOrderFactory.CreateOrder(2, 2, true);
foreach (Procedure rp in order.Procedures)
{
rp.Cancel();
Assert.IsNull(rp.StartTime);
Assert.IsNotNull(rp.EndTime);
}
CheckStatus(OrderStatus.CA, order);
Assert.IsNull(order.StartTime);
Assert.IsNotNull(order.EndTime);
}
public void Test_RescheduleLater()
{
Order order = TestOrderFactory.CreateOrder(2, 2, true, true);
DateTime originalTime = (DateTime)order.ScheduledStartTime;
DateTime newTime = originalTime + TimeSpan.FromDays(1);
Procedure rp = CollectionUtils.FirstElement(order.Procedures);
ProcedureStep step = CollectionUtils.FirstElement(rp.ProcedureSteps);
step.Schedule(newTime);
Assert.AreEqual(newTime, step.Scheduling.StartTime);
// verify order and rp scheduled time still reflect earliest time
Assert.AreEqual(originalTime, rp.ScheduledStartTime);
Assert.AreEqual(originalTime, order.ScheduledStartTime);
}
public void Test_AutoStartOrderProcedure()
{
Order order = TestOrderFactory.CreateOrder(2, 2, true);
// put the order in progress
Procedure rp = CollectionUtils.FirstElement(order.Procedures);
ProcedureStep step = CollectionUtils.FirstElement(rp.ProcedureSteps);
step.Start(TestStaffFactory.CreateStaff(new StaffTypeEnum("STEC", null, null)));
// procedure is in progress
CheckStatus(ProcedureStatus.IP, rp);
Assert.IsNotNull(rp.StartTime);
// order is in progress
CheckStatus(OrderStatus.IP, order);
Assert.IsNotNull(order.StartTime);
}
public void Test_ScheduleProcedureStep()
{
// create an unscheduled order
Order order = TestOrderFactory.CreateOrder(1, 1, true);
DateTime scheduleTime = DateTime.Now;
Procedure rp = CollectionUtils.FirstElement(order.Procedures);
ProcedureStep step = CollectionUtils.FirstElement(rp.ProcedureSteps);
step.Schedule(scheduleTime);
Assert.AreEqual(scheduleTime, step.Scheduling.StartTime);
// verify order and rp scheduled time are updated to reflect earliest time
Assert.AreEqual(scheduleTime, rp.ScheduledStartTime);
Assert.AreEqual(scheduleTime, order.ScheduledStartTime);
}
public void Test_UnscheduleProcedureStep()
{
// create a scheduled order
Order order = TestOrderFactory.CreateOrder(2, 2, true);
// unschedule all steps
foreach (Procedure rp in order.Procedures)
{
foreach (ProcedureStep step in rp.ProcedureSteps)
{
step.Schedule(null);
}
// verify rp start time is null
Assert.IsNull(rp.ScheduledStartTime);
}
// verify order start time is null
Assert.IsNull(order.ScheduledStartTime);
}
public void Test_CancelProcedureFromInProgress()
{
try
{
Order order = TestOrderFactory.CreateOrder(1, 1, true);
Procedure rp = CollectionUtils.FirstElement(order.Procedures);
rp.ModalityProcedureSteps[0].Start(TestStaffFactory.CreateStaff(new StaffTypeEnum("STEC", null, null)));
CheckStatus(ProcedureStatus.IP, rp);
rp.Cancel();
Assert.Fail("expected exception when trying to cancel in progress procedure");
}
catch (WorkflowException e)
{
Assert.IsInstanceOfType(typeof(WorkflowException), e);
}
}
public void Test_CancelOrderFromInProgress()
{
Order order = TestOrderFactory.CreateOrder(2, 2, true);
// put the order in progress
Procedure rp = CollectionUtils.FirstElement(order.Procedures);
ProcedureStep step = CollectionUtils.FirstElement(rp.ProcedureSteps);
step.Start(TestStaffFactory.CreateStaff(new StaffTypeEnum("STEC", null, null)));
try
{
order.Cancel(new OrderCancelInfo(_defaultCancelReason, TestStaffFactory.CreateStaff(new StaffTypeEnum("SCLR", null, null)), "", null));
Assert.Fail("expected exception when trying to cancel non-scheduled order");
}
catch (Exception e)
{
Assert.IsInstanceOfType(typeof(WorkflowException), e);
}
}
public void Test_AutoDiscontinueProcedure()
{
Order order = TestOrderFactory.CreateOrder(2, 2, true);
CheckStatus(OrderStatus.SC, order);
foreach (Procedure rp in order.Procedures)
{
foreach (ProcedureStep step in rp.ProcedureSteps)
{
step.Discontinue();
CheckStatus(ActivityStatus.DC, step);
}
CheckStatus(ProcedureStatus.DC, rp);
Assert.IsNull(rp.StartTime);
Assert.IsNotNull(rp.EndTime);
}
CheckStatus(OrderStatus.DC, order);
Assert.IsNull(order.StartTime);
Assert.IsNotNull(order.EndTime);
}
public void Test_CancelProcedureFromScheduled()
{
Order order = TestOrderFactory.CreateOrder(1, 2, true);
// copy req procs to a list so we can access them by index
List <Procedure> reqProcs = new List <Procedure>(
new TypeSafeEnumerableWrapper <Procedure>(order.Procedures));
Procedure rp1 = reqProcs[0];
rp1.Cancel();
CheckStatus(ProcedureStatus.CA, rp1);
Assert.IsNull(rp1.StartTime);
Assert.IsNotNull(rp1.EndTime);
foreach (ProcedureStep step in rp1.ProcedureSteps)
{
// all steps were scheduled, so they should all be discontinued
CheckStatus(ActivityStatus.DC, step);
Assert.IsNull(step.StartTime);
Assert.IsNotNull(step.EndTime);
}
}
public void Test_DiscontinueProcedureStep()
{
Order order = TestOrderFactory.CreateOrder(2, 2, true);
CheckStatus(OrderStatus.SC, order);
Procedure rp1 = CollectionUtils.FirstElement(order.Procedures);
CheckStatus(ProcedureStatus.SC, rp1);
rp1.ModalityProcedureSteps[0].Discontinue();
CheckStatus(ActivityStatus.DC, rp1.ModalityProcedureSteps[0]);
Assert.IsNull(rp1.ModalityProcedureSteps[0].StartTime);
Assert.IsNotNull(rp1.ModalityProcedureSteps[0].EndTime);
// rp and order status unchanged
CheckStatus(ProcedureStatus.SC, rp1);
Assert.IsNull(rp1.StartTime);
Assert.IsNull(rp1.EndTime);
CheckStatus(OrderStatus.SC, order);
Assert.IsNull(order.StartTime);
Assert.IsNull(order.EndTime);
}
private Report CreateReport()
{
Order order = TestOrderFactory.CreateOrder(1, 1, true, true);
return(new Report(CollectionUtils.FirstElement(order.Procedures)));
}