public ScrollValuePopup(int dy, CircuitElm e, CirSim s) : base()
{
mMyElm = e;
mDeltaY = 0;
mSim = s;
mSim.PushUndo();
setupValues();
Text = mName;
mPnlV = new Panel();
{
mPnlV.Left = 4;
mPnlV.Top = 4;
int ofsY = 0;
/* label */
mLabels = new Label()
{
Text = "---"
};
mLabels.AutoSize = true;
mLabels.Left = 4;
mLabels.Top = ofsY;
mPnlV.Controls.Add(mLabels);
ofsY += mLabels.Height;
/* trbValue */
mTrbValue = new TrackBar()
{
Minimum = 0,
Maximum = mNValues - 1,
SmallChange = 1,
LargeChange = 1,
TickFrequency = mNValues / 24,
TickStyle = TickStyle.TopLeft,
Width = 300,
Height = 21,
Left = 4,
Top = ofsY
};
ofsY += mTrbValue.Height * 2 / 3;
mTrbValue.ValueChanged += new EventHandler((sender, ev) => { setElmValue((TrackBar)sender); });
mPnlV.Width = mTrbValue.Width + 8;
mPnlV.Height = ofsY + 4;
mPnlV.Controls.Add(mTrbValue);
/* */
Controls.Add(mPnlV);
}
doDeltaY(dy);
Width = mPnlV.Width + 24;
Height = mPnlV.Height + 48;
FormBorderStyle = FormBorderStyle.FixedToolWindow;
}
public SliderDialog(CircuitElm ce, CirSim f) : base()
{
Text = "Add Sliders";
sim = f;
elm = ce;
vp = new Panel();
einfos = new ElementInfo[10];
hp = new Panel();
{
hp.AutoSize = true;
/* Apply */
applyButton = new Button()
{
Text = "Apply"
};
applyButton.Click += new EventHandler((sender, e) => { apply(); });
ctrlInsert(hp, applyButton);
/* OK */
okButton = new Button()
{
Text = "OK"
};
okButton.Click += new EventHandler((sender, e) => {
apply();
closeDialog();
});
ctrlInsert(hp, okButton);
/* Cancel */
cancelButton = new Button()
{
Text = "Cancel"
};
cancelButton.Click += new EventHandler((sender, e) => {
closeDialog();
});
ctrlInsert(hp, cancelButton);
}
/* */
ctrlInsert(vp, hp);
/* */
vp.Left = 4;
vp.Top = 4;
Controls.Add(vp);
/* */
buildDialog();
Width = vp.Width + 24;
Height = vp.Height + 64;
Visible = false;
}
public Adjustable(StringTokenizer st, CirSim sim)
{
int e = st.nextTokenInt();
if (e == -1)
{
return;
}
Elm = sim.getElm(e);
EditItem = st.nextTokenInt();
MinValue = st.nextTokenDouble();
MaxValue = st.nextTokenDouble();
SliderText = CustomLogicModel.unescape(st.nextToken());
}
public static void Init(CirSim sim)
{
int ofsY = 0;
VerticalPanel = new Panel();
/* Reset */
BtnReset = new Button()
{
AutoSize = true, Text = "Reset"
};
BtnReset.Click += new EventHandler((s, e) => { sim.ResetButton_onClick(); });
BtnReset.Left = 4;
BtnReset.Top = ofsY;
VerticalPanel.Controls.Add(BtnReset);
ofsY += BtnReset.Height + 4;
/* Run */
BtnRunStop = new Button()
{
AutoSize = true, Text = "RUN"
};
BtnRunStop.Click += new EventHandler((s, e) => { sim.SetSimRunning(!sim.IsRunning); });
BtnRunStop.Left = 4;
BtnRunStop.Top = ofsY;
VerticalPanel.Controls.Add(BtnRunStop);
ofsY += BtnRunStop.Height + 4;
/* Simulation Speed */
var lbl = new Label()
{
Left = 4, Top = ofsY, AutoSize = true, Text = "Simulation Speed"
};
VerticalPanel.Controls.Add(lbl);
ofsY += lbl.Height;
TrbSpeed = new TrackBar()
{
Left = 4,
Top = ofsY,
Minimum = 0,
Maximum = 1000,
SmallChange = 1,
LargeChange = 10,
TickFrequency = 100,
TickStyle = TickStyle.TopLeft,
Value = 10,
Width = 200
};
VerticalPanel.Controls.Add(TrbSpeed);
ofsY += TrbSpeed.Height + 4;
/* Current Speed */
lbl = new Label()
{
Left = 4, Top = ofsY, AutoSize = true, Text = "Current Speed"
};
VerticalPanel.Controls.Add(lbl);
ofsY += lbl.Height;
TrbCurrent = new TrackBar()
{
Left = 4,
Top = ofsY,
Minimum = 1,
Maximum = 100,
SmallChange = 1,
LargeChange = 10,
TickFrequency = 10,
TickStyle = TickStyle.TopLeft,
Value = 50,
Width = 200
};
VerticalPanel.Controls.Add(TrbCurrent);
ofsY += TrbCurrent.Height + 4;
/* Show Current */
ChkShowDots = new CheckBox()
{
Left = 4, Top = ofsY, AutoSize = true, Text = "電流を表示"
};
VerticalPanel.Controls.Add(ChkShowDots);
ofsY += ChkShowDots.Height + 4;
/* Show Values */
ChkShowValues = new CheckBox()
{
Left = 4, Top = ofsY, AutoSize = true, Text = "値を表示"
};
VerticalPanel.Controls.Add(ChkShowValues);
ofsY += ChkShowValues.Height + 4;
/* Show Name */
ChkShowName = new CheckBox()
{
Left = 4, Top = ofsY, AutoSize = true, Text = "名前を表示"
};
VerticalPanel.Controls.Add(ChkShowName);
ofsY += ChkShowName.Height + 4;
/* ANSI */
ChkUseAnsiSymbols = new CheckBox()
{
Left = 4, Top = ofsY, AutoSize = true, Text = "ANSI"
};
ChkUseAnsiSymbols.CheckedChanged += new EventHandler((s, e) => {
setOptionInStorage("ansiResistors", ChkUseAnsiSymbols.Checked);
});
VerticalPanel.Controls.Add(ChkUseAnsiSymbols);
ofsY += ChkUseAnsiSymbols.Height + 4;
/* White Background */
ChkPrintable = new CheckBox()
{
Left = 4, Top = ofsY, AutoSize = true, Text = "白黒表示"
};
ChkPrintable.CheckedChanged += new EventHandler((s, e) => {
for (int i = 0; i < sim.mScopeCount; i++)
{
sim.mScopes[i].SetRect(sim.mScopes[i].BoundingBox);
}
setOptionInStorage("whiteBackground", ChkPrintable.Checked);
});
VerticalPanel.Controls.Add(ChkPrintable);
ofsY += ChkPrintable.Height + 4;
/* Show Cursor Cross Hairs */
ChkCrossHair = new CheckBox()
{
Left = 4, Top = ofsY, AutoSize = true, Text = "ポインターを表示"
};
ChkCrossHair.CheckedChanged += new EventHandler((s, e) => {
setOptionInStorage("crossHair", ChkCrossHair.Checked);
});
VerticalPanel.Controls.Add(ChkCrossHair);
ofsY += ChkCrossHair.Height + 4;
/* TimeStep */
ofsY += 8;
var lblTimeStep = new Label()
{
Left = 4, Top = ofsY, AutoSize = true, Text = "単位時間(sec)"
};
VerticalPanel.Controls.Add(lblTimeStep);
ofsY += lblTimeStep.Height + 4;
mTxtTimeStep = new TextBox()
{
Left = 4, Top = ofsY, Width = 80
};
mTxtTimeStep.TextChanged += new EventHandler((s, e) => {
var tmp = 0.0;
if (Utils.TextToNum(mTxtTimeStep.Text, out tmp))
{
mTimeStep = tmp;
}
else
{
mTxtTimeStep.Text = Utils.UnitText(mTimeStep, "");
}
});
VerticalPanel.Controls.Add(mTxtTimeStep);
ofsY += mTxtTimeStep.Height + 4;
/* SliderPanel */
mSliderPanel = new Panel()
{
Left = 4,
Top = ofsY,
BorderStyle = BorderStyle.FixedSingle,
AutoScroll = true
};
VerticalPanel.Controls.Add(mSliderPanel);
/* */
VerticalPanel.Width = TrbSpeed.Width + 12;
VerticalPanel.Height = ofsY;
}
public CircuitSim()
{
InitializeComponent();
sim = new CirSim();
}
public MenuItems(CirSim sim)
{
mSim = sim;
}
public Circuit(CirSim sim)
{
mSim = sim;
}
public ScopePopupMenu(CirSim sim)
{
mMenuItems = new List <ToolStripMenuItem>();
/* */
mMenuItems.Add(mRemoveScope = new ToolStripMenuItem()
{
Text = "Remove Scope"
});
mRemoveScope.Click += new EventHandler((s, e) => {
sim.Performed(SCOPE_MENU_ITEM.REMOVE_SCOPE);
});
mMenuItems.Add(mDock = new ToolStripMenuItem()
{
Text = "Dock Scope"
});
mDock.Click += new EventHandler((s, e) => {
sim.Performed(SCOPE_MENU_ITEM.DOCK);
});
mMenuItems.Add(mUndock = new ToolStripMenuItem()
{
Text = "Undock Scope"
});
mUndock.Click += new EventHandler((s, e) => {
sim.Performed(SCOPE_MENU_ITEM.UNDOCK);
});
mMenuItems.Add(mMaxScale = new ToolStripMenuItem()
{
Text = "Max Scale"
});
mMaxScale.Click += new EventHandler((s, e) => {
sim.Performed(SCOPE_MENU_ITEM.MAX_SCALE);
});
mMenuItems.Add(mStack = new ToolStripMenuItem()
{
Text = "Stack"
});
mStack.Click += new EventHandler((s, e) => {
sim.Performed(SCOPE_MENU_ITEM.STACK);
});
mMenuItems.Add(mUnstack = new ToolStripMenuItem()
{
Text = "Unstack"
});
mUnstack.Click += new EventHandler((s, e) => {
sim.Performed(SCOPE_MENU_ITEM.UNSTACK);
});
mMenuItems.Add(mCombine = new ToolStripMenuItem()
{
Text = "Combine"
});
mCombine.Click += new EventHandler((s, e) => {
sim.Performed(SCOPE_MENU_ITEM.COMBINE);
});
mMenuItems.Add(mRemovePlot = new ToolStripMenuItem()
{
Text = "Remove Plot"
});
mRemovePlot.Click += new EventHandler((s, e) => {
sim.Performed(SCOPE_MENU_ITEM.REMOVE_PLOT);
});
mMenuItems.Add(mReset = new ToolStripMenuItem()
{
Text = "Reset"
});
mReset.Click += new EventHandler((s, e) => {
sim.Performed(SCOPE_MENU_ITEM.RESET);
});
mMenuItems.Add(mProperties = new ToolStripMenuItem()
{
Text = "Properties..."
});
mProperties.Click += new EventHandler((s, e) => {
sim.Performed(SCOPE_MENU_ITEM.PROPERTIES);
});
}
public ElementPopupMenu(CirSim sim)
{
mMenuItems = new List <ToolStripMenuItem>();
mMenuItems.Add(mEdit = new ToolStripMenuItem()
{
Text = "Edit..."
});
mEdit.Click += new EventHandler((s, e) => {
sim.Performed(ELEMENT_MENU_ITEM.EDIT);
});
var cut = new ToolStripMenuItem()
{
Text = "Cut"
};
mMenuItems.Add(cut);
cut.Click += new EventHandler((s, e) => {
sim.Performed(ELEMENT_MENU_ITEM.CUT);
});
var copy = new ToolStripMenuItem()
{
Text = "Copy"
};
mMenuItems.Add(copy);
copy.Click += new EventHandler((s, e) => {
sim.Performed(ELEMENT_MENU_ITEM.COPY);
});
var delete = new ToolStripMenuItem()
{
Text = "Delete"
};
mMenuItems.Add(delete);
delete.Click += new EventHandler((s, e) => {
sim.Performed(ELEMENT_MENU_ITEM.DELETE);
});
var dup = new ToolStripMenuItem()
{
Text = "Duplicate"
};
mMenuItems.Add(dup);
dup.Click += new EventHandler((s, e) => {
sim.Performed(ELEMENT_MENU_ITEM.DUPLICATE);
});
mMenuItems.Add(mScope = new ToolStripMenuItem()
{
Text = "View in Scope"
});
mScope.Click += new EventHandler((s, e) => {
sim.Performed(ELEMENT_MENU_ITEM.VIEW_IN_SCOPE);
});
mMenuItems.Add(mFloatScope = new ToolStripMenuItem()
{
Text = "View in Undocked Scope"
});
mFloatScope.Click += new EventHandler((s, e) => {
sim.Performed(ELEMENT_MENU_ITEM.VIEW_IN_FLOAT_SCOPE);
});
mMenuItems.Add(mFlip = new ToolStripMenuItem()
{
Text = "Swap Terminals"
});
mFlip.Click += new EventHandler((s, e) => {
sim.Performed(ELEMENT_MENU_ITEM.FLIP);
});
mMenuItems.Add(mSplit = new ToolStripMenuItem()
{
Text = "Split Wire"
});
mSplit.Click += new EventHandler((s, e) => {
sim.Performed(ELEMENT_MENU_ITEM.SPLIT);
});
mMenuItems.Add(mSlider = new ToolStripMenuItem()
{
Text = "Sliders..."
});
mSlider.Click += new EventHandler((s, e) => {
sim.Performed(ELEMENT_MENU_ITEM.SLIDERS);
});
}