/// <summary> Performs the cleanup pass on the specified data and bit-plane. It codes
/// all insignificant samples which have its "visited" state bit off, using
/// the ZC, SC, and RLC primitives. It toggles the "visited" state bit to 0
/// (off) for all samples in the code-block.
///
/// </summary>
/// <param name="srcblk">The code-block data to code
///
/// </param>
/// <param name="mq">The MQ-coder to use
///
/// </param>
/// <param name="doterm">If true it performs an MQ-coder termination after the end
/// of the pass
///
/// </param>
/// <param name="bp">The bit-plane to code
///
/// </param>
/// <param name="state">The state information for the code-block
///
/// </param>
/// <param name="fs">The distortion estimation lookup table for SC
///
/// </param>
/// <param name="zc_lut">The ZC lookup table to use in ZC.
///
/// </param>
/// <param name="symbuf">The buffer to hold symbols to send to the MQ coder
///
/// </param>
/// <param name="ctxtbuf">A buffer to hold the contexts to use in sending the
/// buffered symbols to the MQ coder.
///
/// </param>
/// <param name="ratebuf">The buffer where to store the rate (i.e. coded lenth) at
/// the end of this coding pass.
///
/// </param>
/// <param name="pidx">The coding pass index. Is the index in the 'ratebuf' array
/// where to store the coded length after this coding pass.
///
/// </param>
/// <param name="ltpidx">The index of the last pass that was terminated, or
/// negative if none.
///
/// </param>
/// <param name="options">The bitmask of entropy coding options to apply to the
/// code-block
///
/// </param>
/// <returns> The decrease in distortion for this pass, in the fixed-point
/// normalized representation of the 'FS_LOSSY' and 'FS_LOSSLESS' tables.
///
/// </returns>
static private int cleanuppass(CBlkWTData srcblk, MQCoder mq, bool doterm, int bp, int[] state, int[] fs, int[] zc_lut, int[] symbuf, int[] ctxtbuf, int[] ratebuf, int pidx, int ltpidx, int options)
{
// NOTE: The speedup mode of the MQ coder has been briefly tried to
// speed up the coding of insignificants RLCs, without any success
// (i.e. no speedup whatsoever). The use of the speedup mode should be
// revisisted more in depth and the implementationn of it in MQCoder
// should be reviewed for optimization opportunities.
int j, sj; // The state index for line and stripe
int k, sk; // The data index for line and stripe
int nsym = 0; // Symbol counter for symbol and context buffers
int dscanw; // The data scan-width
int sscanw; // The state scan-width
int jstep; // Stripe to stripe step for 'sj'
int kstep; // Stripe to stripe step for 'sk'
int stopsk; // The loop limit on the variable sk
int csj; // Local copy (i.e. cached) of 'state[j]'
int mask; // The mask for the current bit-plane
int sym; // The symbol to code
int rlclen; // Length of RLC
int ctxt; // The context to use
int[] data; // The data buffer
int dist; // The distortion reduction for this pass
int shift; // Shift amount for distortion
int upshift; // Shift left amount for distortion
int downshift; // Shift right amount for distortion
int normval; // The normalized sample magnitude value
int s; // The stripe index
bool causal; // Flag to indicate if stripe-causal context
// formation is to be used
int nstripes; // The number of stripes in the code-block
int sheight; // Height of the current stripe
int off_ul, off_ur, off_dr, off_dl; // offsets
// Initialize local variables
dscanw = srcblk.scanw;
sscanw = srcblk.w + 2;
jstep = sscanw * CSJ2K.j2k.entropy.StdEntropyCoderOptions.STRIPE_HEIGHT / 2 - srcblk.w;
kstep = dscanw * CSJ2K.j2k.entropy.StdEntropyCoderOptions.STRIPE_HEIGHT - srcblk.w;
mask = 1 << bp;
data = (int[]) srcblk.Data;
nstripes = (srcblk.h + CSJ2K.j2k.entropy.StdEntropyCoderOptions.STRIPE_HEIGHT - 1) / CSJ2K.j2k.entropy.StdEntropyCoderOptions.STRIPE_HEIGHT;
dist = 0;
// We use the MSE_LKP_BITS-1 bits below the bit just coded for
// distortion estimation.
shift = bp - (MSE_LKP_BITS - 1);
upshift = (shift >= 0)?0:- shift;
downshift = (shift <= 0)?0:shift;
causal = (options & CSJ2K.j2k.entropy.StdEntropyCoderOptions.OPT_VERT_STR_CAUSAL) != 0;
// Pre-calculate offsets in 'state' for diagonal neighbors
off_ul = - sscanw - 1; // up-left
off_ur = - sscanw + 1; // up-right
off_dr = sscanw + 1; // down-right
off_dl = sscanw - 1; // down-left
// Code stripe by stripe
sk = srcblk.offset;
sj = sscanw + 1;
for (s = nstripes - 1; s >= 0; s--, sk += kstep, sj += jstep)
{
sheight = (s != 0)?CSJ2K.j2k.entropy.StdEntropyCoderOptions.STRIPE_HEIGHT:srcblk.h - (nstripes - 1) * CSJ2K.j2k.entropy.StdEntropyCoderOptions.STRIPE_HEIGHT;
stopsk = sk + srcblk.w;
// Scan by set of 1 stripe column at a time
for (nsym = 0; sk < stopsk; sk++, sj++)
{
// Start column
j = sj;
csj = state[j];
{
// Check for RLC: if all samples are not significant, not
// visited and do not have a non-zero context, and column
// is full height, we do RLC.
if (csj == 0 && state[j + sscanw] == 0 && sheight == CSJ2K.j2k.entropy.StdEntropyCoderOptions.STRIPE_HEIGHT)
{
k = sk;
if ((data[k] & mask) != 0)
{
rlclen = 0;
}
else if ((data[k += dscanw] & mask) != 0)
{
rlclen = 1;
}
else if ((data[k += dscanw] & mask) != 0)
{
rlclen = 2;
j += sscanw;
csj = state[j];
}
else if ((data[k += dscanw] & mask) != 0)
{
rlclen = 3;
j += sscanw;
csj = state[j];
}
else
{
// Code insignificant RLC
symbuf[nsym] = 0;
ctxtbuf[nsym++] = RLC_CTXT;
// Goto next column
continue;
}
// Code significant RLC
symbuf[nsym] = 1;
ctxtbuf[nsym++] = RLC_CTXT;
// Send MSB bit index
symbuf[nsym] = rlclen >> 1;
ctxtbuf[nsym++] = UNIF_CTXT;
// Send LSB bit index
symbuf[nsym] = rlclen & 0x01;
ctxtbuf[nsym++] = UNIF_CTXT;
// Code sign of sample that became significant
// Update distortion
normval = (data[k] >> downshift) << upshift;
dist += fs[normval & ((1 << (MSE_LKP_BITS - 1)) - 1)];
// Apply sign coding
sym = SupportClass.URShift(data[k], 31);
if ((rlclen & 0x01) == 0)
{
// Sample that became significant is first row of
// its column half
ctxt = SC_LUT[(SupportClass.URShift(csj, SC_SHIFT_R1)) & SC_MASK];
symbuf[nsym] = sym ^ (SupportClass.URShift(ctxt, SC_SPRED_SHIFT));
ctxtbuf[nsym++] = ctxt & SC_LUT_MASK;
// Update state information (significant bit,
// visited bit, neighbor significant bit of
// neighbors, non zero context of neighbors, sign
// of neighbors)
if (rlclen != 0 || !causal)
{
// If in causal mode do not change contexts of
// previous stripe.
state[j + off_ul] |= STATE_NZ_CTXT_R2 | STATE_D_DR_R2;
state[j + off_ur] |= STATE_NZ_CTXT_R2 | STATE_D_DL_R2;
}
// Update sign state information of neighbors
if (sym != 0)
{
csj |= STATE_SIG_R1 | STATE_VISITED_R1 | STATE_NZ_CTXT_R2 | STATE_V_U_R2 | STATE_V_U_SIGN_R2;
if (rlclen != 0 || !causal)
{
// If in causal mode do not change
// contexts of previous stripe.
state[j - sscanw] |= STATE_NZ_CTXT_R2 | STATE_V_D_R2 | STATE_V_D_SIGN_R2;
}
state[j + 1] |= STATE_NZ_CTXT_R1 | STATE_NZ_CTXT_R2 | STATE_H_L_R1 | STATE_H_L_SIGN_R1 | STATE_D_UL_R2;
state[j - 1] |= STATE_NZ_CTXT_R1 | STATE_NZ_CTXT_R2 | STATE_H_R_R1 | STATE_H_R_SIGN_R1 | STATE_D_UR_R2;
}
else
{
csj |= STATE_SIG_R1 | STATE_VISITED_R1 | STATE_NZ_CTXT_R2 | STATE_V_U_R2;
if (rlclen != 0 || !causal)
{
// If in causal mode do not change
// contexts of previous stripe.
state[j - sscanw] |= STATE_NZ_CTXT_R2 | STATE_V_D_R2;
}
state[j + 1] |= STATE_NZ_CTXT_R1 | STATE_NZ_CTXT_R2 | STATE_H_L_R1 | STATE_D_UL_R2;
state[j - 1] |= STATE_NZ_CTXT_R1 | STATE_NZ_CTXT_R2 | STATE_H_R_R1 | STATE_D_UR_R2;
}
// Changes to csj are saved later
if ((rlclen >> 1) != 0)
{
// Sample that became significant is in bottom
// half of column => jump to bottom half
//UPGRADE_NOTE: Labeled break statement was changed to a goto statement. "ms-help://MS.VSCC.v80/dv_commoner/local/redirect.htm?index='!DefaultContextWindowIndex'&keyword='jlca1012'"
goto top_half_brk;
}
// Otherwise sample that became significant is in
// top half of column => continue on top half
}
else
{
// Sample that became significant is second row of
// its column half
ctxt = SC_LUT[(SupportClass.URShift(csj, SC_SHIFT_R2)) & SC_MASK];
symbuf[nsym] = sym ^ (SupportClass.URShift(ctxt, SC_SPRED_SHIFT));
ctxtbuf[nsym++] = ctxt & SC_LUT_MASK;
// Update state information (significant bit,
// neighbor significant bit of neighbors, non zero
// context of neighbors, sign of neighbors)
state[j + off_dl] |= STATE_NZ_CTXT_R1 | STATE_D_UR_R1;
state[j + off_dr] |= STATE_NZ_CTXT_R1 | STATE_D_UL_R1;
// Update sign state information of neighbors
if (sym != 0)
{
csj |= STATE_SIG_R2 | STATE_NZ_CTXT_R1 | STATE_V_D_R1 | STATE_V_D_SIGN_R1;
state[j + sscanw] |= STATE_NZ_CTXT_R1 | STATE_V_U_R1 | STATE_V_U_SIGN_R1;
state[j + 1] |= STATE_NZ_CTXT_R1 | STATE_NZ_CTXT_R2 | STATE_D_DL_R1 | STATE_H_L_R2 | STATE_H_L_SIGN_R2;
state[j - 1] |= STATE_NZ_CTXT_R1 | STATE_NZ_CTXT_R2 | STATE_D_DR_R1 | STATE_H_R_R2 | STATE_H_R_SIGN_R2;
}
else
{
csj |= STATE_SIG_R2 | STATE_NZ_CTXT_R1 | STATE_V_D_R1;
state[j + sscanw] |= STATE_NZ_CTXT_R1 | STATE_V_U_R1;
state[j + 1] |= STATE_NZ_CTXT_R1 | STATE_NZ_CTXT_R2 | STATE_D_DL_R1 | STATE_H_L_R2;
state[j - 1] |= STATE_NZ_CTXT_R1 | STATE_NZ_CTXT_R2 | STATE_D_DR_R1 | STATE_H_R_R2;
}
// Save changes to csj
state[j] = csj;
if ((rlclen >> 1) != 0)
{
// Sample that became significant is in bottom
// half of column => we're done with this
// column
continue;
}
// Otherwise sample that became significant is in
// top half of column => we're done with top
// column
j += sscanw;
csj = state[j];
//UPGRADE_NOTE: Labeled break statement was changed to a goto statement. "ms-help://MS.VSCC.v80/dv_commoner/local/redirect.htm?index='!DefaultContextWindowIndex'&keyword='jlca1012'"
goto top_half_brk;
}
}
// Do half top of column
// If any of the two samples is not significant and has
// not been visited in the current bit-plane we can not
// skip them
if ((((csj >> 1) | csj) & VSTD_MASK_R1R2) != VSTD_MASK_R1R2)
{
k = sk;
// Scan first row
if ((csj & (STATE_SIG_R1 | STATE_VISITED_R1)) == 0)
{
// Apply zero coding
ctxtbuf[nsym] = zc_lut[csj & ZC_MASK];
if ((symbuf[nsym++] = SupportClass.URShift((data[k] & mask), bp)) != 0)
{
// Became significant
// Apply sign coding
sym = SupportClass.URShift(data[k], 31);
ctxt = SC_LUT[(SupportClass.URShift(csj, SC_SHIFT_R1)) & SC_MASK];
symbuf[nsym] = sym ^ (SupportClass.URShift(ctxt, SC_SPRED_SHIFT));
ctxtbuf[nsym++] = ctxt & SC_LUT_MASK;
// Update state information (significant bit,
// visited bit, neighbor significant bit of
// neighbors, non zero context of neighbors,
// sign of neighbors)
if (!causal)
{
// If in causal mode do not change
// contexts of previous stripe.
state[j + off_ul] |= STATE_NZ_CTXT_R2 | STATE_D_DR_R2;
state[j + off_ur] |= STATE_NZ_CTXT_R2 | STATE_D_DL_R2;
}
// Update sign state information of neighbors
if (sym != 0)
{
csj |= STATE_SIG_R1 | STATE_VISITED_R1 | STATE_NZ_CTXT_R2 | STATE_V_U_R2 | STATE_V_U_SIGN_R2;
if (!causal)
{
// If in causal mode do not change
// contexts of previous stripe.
state[j - sscanw] |= STATE_NZ_CTXT_R2 | STATE_V_D_R2 | STATE_V_D_SIGN_R2;
}
state[j + 1] |= STATE_NZ_CTXT_R1 | STATE_NZ_CTXT_R2 | STATE_H_L_R1 | STATE_H_L_SIGN_R1 | STATE_D_UL_R2;
state[j - 1] |= STATE_NZ_CTXT_R1 | STATE_NZ_CTXT_R2 | STATE_H_R_R1 | STATE_H_R_SIGN_R1 | STATE_D_UR_R2;
}
else
{
csj |= STATE_SIG_R1 | STATE_VISITED_R1 | STATE_NZ_CTXT_R2 | STATE_V_U_R2;
if (!causal)
{
// If in causal mode do not change
// contexts of previous stripe.
state[j - sscanw] |= STATE_NZ_CTXT_R2 | STATE_V_D_R2;
}
state[j + 1] |= STATE_NZ_CTXT_R1 | STATE_NZ_CTXT_R2 | STATE_H_L_R1 | STATE_D_UL_R2;
state[j - 1] |= STATE_NZ_CTXT_R1 | STATE_NZ_CTXT_R2 | STATE_H_R_R1 | STATE_D_UR_R2;
}
// Update distortion
normval = (data[k] >> downshift) << upshift;
dist += fs[normval & ((1 << (MSE_LKP_BITS - 1)) - 1)];
}
}
if (sheight < 2)
{
csj &= ~ (STATE_VISITED_R1 | STATE_VISITED_R2);
state[j] = csj;
continue;
}
// Scan second row
if ((csj & (STATE_SIG_R2 | STATE_VISITED_R2)) == 0)
{
k += dscanw;
// Apply zero coding
ctxtbuf[nsym] = zc_lut[(SupportClass.URShift(csj, STATE_SEP)) & ZC_MASK];
if ((symbuf[nsym++] = SupportClass.URShift((data[k] & mask), bp)) != 0)
{
// Became significant
// Apply sign coding
sym = SupportClass.URShift(data[k], 31);
ctxt = SC_LUT[(SupportClass.URShift(csj, SC_SHIFT_R2)) & SC_MASK];
symbuf[nsym] = sym ^ (SupportClass.URShift(ctxt, SC_SPRED_SHIFT));
ctxtbuf[nsym++] = ctxt & SC_LUT_MASK;
// Update state information (significant bit,
// visited bit, neighbor significant bit of
// neighbors, non zero context of neighbors,
// sign of neighbors)
state[j + off_dl] |= STATE_NZ_CTXT_R1 | STATE_D_UR_R1;
state[j + off_dr] |= STATE_NZ_CTXT_R1 | STATE_D_UL_R1;
// Update sign state information of neighbors
if (sym != 0)
{
csj |= STATE_SIG_R2 | STATE_VISITED_R2 | STATE_NZ_CTXT_R1 | STATE_V_D_R1 | STATE_V_D_SIGN_R1;
state[j + sscanw] |= STATE_NZ_CTXT_R1 | STATE_V_U_R1 | STATE_V_U_SIGN_R1;
state[j + 1] |= STATE_NZ_CTXT_R1 | STATE_NZ_CTXT_R2 | STATE_D_DL_R1 | STATE_H_L_R2 | STATE_H_L_SIGN_R2;
state[j - 1] |= STATE_NZ_CTXT_R1 | STATE_NZ_CTXT_R2 | STATE_D_DR_R1 | STATE_H_R_R2 | STATE_H_R_SIGN_R2;
}
else
{
csj |= STATE_SIG_R2 | STATE_VISITED_R2 | STATE_NZ_CTXT_R1 | STATE_V_D_R1;
state[j + sscanw] |= STATE_NZ_CTXT_R1 | STATE_V_U_R1;
state[j + 1] |= STATE_NZ_CTXT_R1 | STATE_NZ_CTXT_R2 | STATE_D_DL_R1 | STATE_H_L_R2;
state[j - 1] |= STATE_NZ_CTXT_R1 | STATE_NZ_CTXT_R2 | STATE_D_DR_R1 | STATE_H_R_R2;
}
// Update distortion
normval = (data[k] >> downshift) << upshift;
dist += fs[normval & ((1 << (MSE_LKP_BITS - 1)) - 1)];
}
}
}
csj &= ~ (STATE_VISITED_R1 | STATE_VISITED_R2);
state[j] = csj;
// Do half bottom of column
if (sheight < 3)
continue;
j += sscanw;
csj = state[j];
}
//UPGRADE_NOTE: Label 'top_half_brk' was added. "ms-help://MS.VSCC.v80/dv_commoner/local/redirect.htm?index='!DefaultContextWindowIndex'&keyword='jlca1011'"
top_half_brk: ;
// end of 'top_half' block
// If any of the two samples is not significant and has
// not been visited in the current bit-plane we can not
// skip them
if ((((csj >> 1) | csj) & VSTD_MASK_R1R2) != VSTD_MASK_R1R2)
{
k = sk + (dscanw << 1);
// Scan first row
if ((csj & (STATE_SIG_R1 | STATE_VISITED_R1)) == 0)
{
// Apply zero coding
ctxtbuf[nsym] = zc_lut[csj & ZC_MASK];
if ((symbuf[nsym++] = SupportClass.URShift((data[k] & mask), bp)) != 0)
{
// Became significant
// Apply sign coding
sym = SupportClass.URShift(data[k], 31);
ctxt = SC_LUT[(SupportClass.URShift(csj, SC_SHIFT_R1)) & SC_MASK];
symbuf[nsym] = sym ^ (SupportClass.URShift(ctxt, SC_SPRED_SHIFT));
ctxtbuf[nsym++] = ctxt & SC_LUT_MASK;
// Update state information (significant bit,
// visited bit, neighbor significant bit of
// neighbors, non zero context of neighbors,
// sign of neighbors)
state[j + off_ul] |= STATE_NZ_CTXT_R2 | STATE_D_DR_R2;
state[j + off_ur] |= STATE_NZ_CTXT_R2 | STATE_D_DL_R2;
// Update sign state information of neighbors
if (sym != 0)
{
csj |= STATE_SIG_R1 | STATE_VISITED_R1 | STATE_NZ_CTXT_R2 | STATE_V_U_R2 | STATE_V_U_SIGN_R2;
state[j - sscanw] |= STATE_NZ_CTXT_R2 | STATE_V_D_R2 | STATE_V_D_SIGN_R2;
state[j + 1] |= STATE_NZ_CTXT_R1 | STATE_NZ_CTXT_R2 | STATE_H_L_R1 | STATE_H_L_SIGN_R1 | STATE_D_UL_R2;
state[j - 1] |= STATE_NZ_CTXT_R1 | STATE_NZ_CTXT_R2 | STATE_H_R_R1 | STATE_H_R_SIGN_R1 | STATE_D_UR_R2;
}
else
{
csj |= STATE_SIG_R1 | STATE_VISITED_R1 | STATE_NZ_CTXT_R2 | STATE_V_U_R2;
state[j - sscanw] |= STATE_NZ_CTXT_R2 | STATE_V_D_R2;
state[j + 1] |= STATE_NZ_CTXT_R1 | STATE_NZ_CTXT_R2 | STATE_H_L_R1 | STATE_D_UL_R2;
state[j - 1] |= STATE_NZ_CTXT_R1 | STATE_NZ_CTXT_R2 | STATE_H_R_R1 | STATE_D_UR_R2;
}
// Update distortion
normval = (data[k] >> downshift) << upshift;
dist += fs[normval & ((1 << (MSE_LKP_BITS - 1)) - 1)];
}
}
if (sheight < 4)
{
csj &= ~ (STATE_VISITED_R1 | STATE_VISITED_R2);
state[j] = csj;
continue;
}
// Scan second row
if ((csj & (STATE_SIG_R2 | STATE_VISITED_R2)) == 0)
{
k += dscanw;
// Apply zero coding
ctxtbuf[nsym] = zc_lut[(SupportClass.URShift(csj, STATE_SEP)) & ZC_MASK];
if ((symbuf[nsym++] = SupportClass.URShift((data[k] & mask), bp)) != 0)
{
// Became significant
// Apply sign coding
sym = SupportClass.URShift(data[k], 31);
ctxt = SC_LUT[(SupportClass.URShift(csj, SC_SHIFT_R2)) & SC_MASK];
symbuf[nsym] = sym ^ (SupportClass.URShift(ctxt, SC_SPRED_SHIFT));
ctxtbuf[nsym++] = ctxt & SC_LUT_MASK;
// Update state information (significant bit,
// visited bit, neighbor significant bit of
// neighbors, non zero context of neighbors,
// sign of neighbors)
state[j + off_dl] |= STATE_NZ_CTXT_R1 | STATE_D_UR_R1;
state[j + off_dr] |= STATE_NZ_CTXT_R1 | STATE_D_UL_R1;
// Update sign state information of neighbors
if (sym != 0)
{
csj |= STATE_SIG_R2 | STATE_VISITED_R2 | STATE_NZ_CTXT_R1 | STATE_V_D_R1 | STATE_V_D_SIGN_R1;
state[j + sscanw] |= STATE_NZ_CTXT_R1 | STATE_V_U_R1 | STATE_V_U_SIGN_R1;
state[j + 1] |= STATE_NZ_CTXT_R1 | STATE_NZ_CTXT_R2 | STATE_D_DL_R1 | STATE_H_L_R2 | STATE_H_L_SIGN_R2;
state[j - 1] |= STATE_NZ_CTXT_R1 | STATE_NZ_CTXT_R2 | STATE_D_DR_R1 | STATE_H_R_R2 | STATE_H_R_SIGN_R2;
}
else
{
csj |= STATE_SIG_R2 | STATE_VISITED_R2 | STATE_NZ_CTXT_R1 | STATE_V_D_R1;
state[j + sscanw] |= STATE_NZ_CTXT_R1 | STATE_V_U_R1;
state[j + 1] |= STATE_NZ_CTXT_R1 | STATE_NZ_CTXT_R2 | STATE_D_DL_R1 | STATE_H_L_R2;
state[j - 1] |= STATE_NZ_CTXT_R1 | STATE_NZ_CTXT_R2 | STATE_D_DR_R1 | STATE_H_R_R2;
}
// Update distortion
normval = (data[k] >> downshift) << upshift;
dist += fs[normval & ((1 << (MSE_LKP_BITS - 1)) - 1)];
}
}
}
csj &= ~ (STATE_VISITED_R1 | STATE_VISITED_R2);
state[j] = csj;
}
// Code all buffered symbols, if any
if (nsym > 0)
mq.codeSymbols(symbuf, ctxtbuf, nsym);
}
// Insert a segment marker if we need to
if ((options & CSJ2K.j2k.entropy.StdEntropyCoderOptions.OPT_SEG_SYMBOLS) != 0)
{
mq.codeSymbols(SEG_SYMBOLS, SEG_SYMB_CTXTS, SEG_SYMBOLS.Length);
}
// Reset the MQ context states if we need to
if ((options & CSJ2K.j2k.entropy.StdEntropyCoderOptions.OPT_RESET_MQ) != 0)
{
mq.resetCtxts();
}
// Terminate the MQ bit stream if we need to
if (doterm)
{
ratebuf[pidx] = mq.terminate(); // Termination has special length
}
else
{
// Use normal length calculation
ratebuf[pidx] = mq.NumCodedBytes;
}
// Add length of previous segments, if any
if (ltpidx >= 0)
{
ratebuf[pidx] += ratebuf[ltpidx];
}
// Finish length calculation if needed
if (doterm)
{
mq.finishLengthCalculation(ratebuf, pidx);
}
// Return the reduction in distortion
return dist;
}
/// <summary> Compresses the code-block in 'srcblk' and puts the results in 'ccb',
/// using the specified options and temporary storage.
///
/// </summary>
/// <param name="c">The component for which to return the next code-block.
///
/// </param>
/// <param name="ccb">The object where the compressed data will be stored. If the
/// 'data' array of 'cbb' is not null it may be reused to return the
/// compressed data.
///
/// </param>
/// <param name="srcblk">The code-block data to code
///
/// </param>
/// <param name="mq">The MQ-coder to use
///
/// </param>
/// <param name="bout">The bit level output to use. Used only if 'OPT_BYPASS' is
/// turned on in the 'options' argument.
///
/// </param>
/// <param name="out">The byte buffer trough which the compressed data is stored.
///
/// </param>
/// <param name="state">The state information for the code-block
///
/// </param>
/// <param name="distbuf">The buffer where to store the distortion at
/// the end of each coding pass.
///
/// </param>
/// <param name="ratebuf">The buffer where to store the rate (i.e. coded lenth) at
/// the end of each coding pass.
///
/// </param>
/// <param name="istermbuf">The buffer where to store the terminated flag for each
/// coding pass.
///
/// </param>
/// <param name="symbuf">The buffer to hold symbols to send to the MQ coder
///
/// </param>
/// <param name="ctxtbuf">A buffer to hold the contexts to use in sending the
/// buffered symbols to the MQ coder.
///
/// </param>
/// <param name="options">The options to use when coding this code-block
///
/// </param>
/// <param name="rev">The reversible flag. Should be true if the source of this
/// code-block's data is reversible.
///
/// </param>
/// <param name="lcType">The type of length calculation to use with the MQ coder.
///
/// </param>
/// <param name="tType">The type of termination to use with the MQ coder.
///
/// </param>
/// <seealso cref="getNextCodeBlock">
///
/// </seealso>
static private void compressCodeBlock(int c, CBlkRateDistStats ccb, CBlkWTData srcblk, MQCoder mq, BitToByteOutput bout, ByteOutputBuffer out_Renamed, int[] state, double[] distbuf, int[] ratebuf, bool[] istermbuf, int[] symbuf, int[] ctxtbuf, int options, bool rev, int lcType, int tType)
{
// NOTE: This method should not access any non-final instance or
// static variables, either directly or indirectly through other
// methods in order to be sure that the method is thread safe.
int[] zc_lut; // The ZC lookup table to use
int skipbp; // The number of non-significant bit-planes to skip
int curbp; // The current magnitude bit-plane (starts at 30)
int[] fm; // The distortion estimation lookup table for MR
int[] fs; // The distortion estimation lookup table for SC
int lmb; // The least significant magnitude bit
int npass; // The number of coding passes, for R-D statistics
double msew; // The distortion (MSE weight) for the current bit-plane
double totdist; // The total cumulative distortion decrease
int ltpidx; // The index of the last pass which is terminated
// Check error-resilient termination
if ((options & CSJ2K.j2k.entropy.StdEntropyCoderOptions.OPT_PRED_TERM) != 0 && tType != MQCoder.TERM_PRED_ER)
{
throw new System.ArgumentException("Embedded error-resilient info " + "in MQ termination option " + "specified but incorrect MQ " + "termination " + "policy specified");
}
// Set MQ flags
mq.LenCalcType = lcType;
mq.TermType = tType;
lmb = 30 - srcblk.magbits + 1;
// If there are more bit-planes to code than the implementation
// bit-depth set lmb to 0
lmb = (lmb < 0)?0:lmb;
// Reset state
ArrayUtil.intArraySet(state, 0);
// Find the most significant bit-plane
skipbp = calcSkipMSBP(srcblk, lmb);
// Initialize output code-block
ccb.m = srcblk.m;
ccb.n = srcblk.n;
ccb.sb = srcblk.sb;
ccb.nROIcoeff = srcblk.nROIcoeff;
ccb.skipMSBP = skipbp;
if (ccb.nROIcoeff != 0)
{
ccb.nROIcp = 3 * (srcblk.nROIbp - skipbp - 1) + 1;
}
else
{
ccb.nROIcp = 0;
}
// Choose correct ZC lookup table for global orientation
switch (srcblk.sb.orientation)
{
case Subband.WT_ORIENT_HL:
zc_lut = ZC_LUT_HL;
break;
case Subband.WT_ORIENT_LL:
case Subband.WT_ORIENT_LH:
zc_lut = ZC_LUT_LH;
break;
case Subband.WT_ORIENT_HH:
zc_lut = ZC_LUT_HH;
break;
default:
throw new System.InvalidOperationException("JJ2000 internal error");
}
// Loop on significant magnitude bit-planes doing the 3 passes
curbp = 30 - skipbp;
fs = FS_LOSSY;
fm = FM_LOSSY;
msew = System.Math.Pow(2, ((curbp - lmb) << 1) - MSE_LKP_FRAC_BITS) * srcblk.sb.stepWMSE * srcblk.wmseScaling;
totdist = 0f;
npass = 0;
ltpidx = - 1;
// First significant bit-plane has only the pass pass
if (curbp >= lmb)
{
// Do we need the "lossless" 'fs' table ?
if (rev && curbp == lmb)
{
fs = FM_LOSSLESS;
}
// We terminate if regular termination, last bit-plane, or next
// bit-plane is "raw".
istermbuf[npass] = (options & CSJ2K.j2k.entropy.StdEntropyCoderOptions.OPT_TERM_PASS) != 0 || curbp == lmb || ((options & CSJ2K.j2k.entropy.StdEntropyCoderOptions.OPT_BYPASS) != 0 && (31 - CSJ2K.j2k.entropy.StdEntropyCoderOptions.NUM_NON_BYPASS_MS_BP - skipbp) >= curbp);
totdist += cleanuppass(srcblk, mq, istermbuf[npass], curbp, state, fs, zc_lut, symbuf, ctxtbuf, ratebuf, npass, ltpidx, options) * msew;
distbuf[npass] = totdist;
if (istermbuf[npass])
ltpidx = npass;
npass++;
msew *= 0.25;
curbp--;
}
// Other bit-planes have all passes
while (curbp >= lmb)
{
// Do we need the "lossless" 'fs' and 'fm' tables ?
if (rev && curbp == lmb)
{
fs = FS_LOSSLESS;
fm = FM_LOSSLESS;
}
// Do the significance propagation pass
// We terminate if regular termination only
istermbuf[npass] = (options & CSJ2K.j2k.entropy.StdEntropyCoderOptions.OPT_TERM_PASS) != 0;
if ((options & CSJ2K.j2k.entropy.StdEntropyCoderOptions.OPT_BYPASS) == 0 || (31 - CSJ2K.j2k.entropy.StdEntropyCoderOptions.NUM_NON_BYPASS_MS_BP - skipbp <= curbp))
{
// No bypass coding
totdist += sigProgPass(srcblk, mq, istermbuf[npass], curbp, state, fs, zc_lut, symbuf, ctxtbuf, ratebuf, npass, ltpidx, options) * msew;
}
else
{
// Bypass ("raw") coding
bout.PredTerm = (options & CSJ2K.j2k.entropy.StdEntropyCoderOptions.OPT_PRED_TERM) != 0;
totdist += rawSigProgPass(srcblk, bout, istermbuf[npass], curbp, state, fs, ratebuf, npass, ltpidx, options) * msew;
}
distbuf[npass] = totdist;
if (istermbuf[npass])
ltpidx = npass;
npass++;
// Do the magnitude refinement pass
// We terminate if regular termination or bypass ("raw") coding
istermbuf[npass] = (options & CSJ2K.j2k.entropy.StdEntropyCoderOptions.OPT_TERM_PASS) != 0 || ((options & CSJ2K.j2k.entropy.StdEntropyCoderOptions.OPT_BYPASS) != 0 && (31 - CSJ2K.j2k.entropy.StdEntropyCoderOptions.NUM_NON_BYPASS_MS_BP - skipbp > curbp));
if ((options & CSJ2K.j2k.entropy.StdEntropyCoderOptions.OPT_BYPASS) == 0 || (31 - CSJ2K.j2k.entropy.StdEntropyCoderOptions.NUM_NON_BYPASS_MS_BP - skipbp <= curbp))
{
// No bypass coding
totdist += magRefPass(srcblk, mq, istermbuf[npass], curbp, state, fm, symbuf, ctxtbuf, ratebuf, npass, ltpidx, options) * msew;
}
else
{
// Bypass ("raw") coding
bout.PredTerm = (options & CSJ2K.j2k.entropy.StdEntropyCoderOptions.OPT_PRED_TERM) != 0;
totdist += rawMagRefPass(srcblk, bout, istermbuf[npass], curbp, state, fm, ratebuf, npass, ltpidx, options) * msew;
}
distbuf[npass] = totdist;
if (istermbuf[npass])
ltpidx = npass;
npass++;
// Do the clenup pass
// We terminate if regular termination, last bit-plane, or next
// bit-plane is "raw".
istermbuf[npass] = (options & CSJ2K.j2k.entropy.StdEntropyCoderOptions.OPT_TERM_PASS) != 0 || curbp == lmb || ((options & CSJ2K.j2k.entropy.StdEntropyCoderOptions.OPT_BYPASS) != 0 && (31 - CSJ2K.j2k.entropy.StdEntropyCoderOptions.NUM_NON_BYPASS_MS_BP - skipbp) >= curbp);
totdist += cleanuppass(srcblk, mq, istermbuf[npass], curbp, state, fs, zc_lut, symbuf, ctxtbuf, ratebuf, npass, ltpidx, options) * msew;
distbuf[npass] = totdist;
if (istermbuf[npass])
ltpidx = npass;
npass++;
// Goto next bit-plane
msew *= 0.25;
curbp--;
}
// Copy compressed data and rate-distortion statistics to output
ccb.data = new byte[out_Renamed.size()];
out_Renamed.toByteArray(0, out_Renamed.size(), ccb.data, 0);
checkEndOfPassFF(ccb.data, ratebuf, istermbuf, npass);
ccb.selectConvexHull(ratebuf, distbuf, (options & (CSJ2K.j2k.entropy.StdEntropyCoderOptions.OPT_BYPASS | CSJ2K.j2k.entropy.StdEntropyCoderOptions.OPT_TERM_PASS)) != 0?istermbuf:null, npass, rev);
// Reset MQ coder and bit output for next code-block
mq.reset();
if (bout != null)
bout.reset();
}
/// <summary> Performs the magnitude refinement pass on the specified data and
/// bit-plane. It codes the samples which are significant and which do not
/// have the "visited" state bit turned on, using the MR primitive. The
/// "visited" state bit is not mofified for any samples.
///
/// </summary>
/// <param name="srcblk">The code-block data to code
///
/// </param>
/// <param name="mq">The MQ-coder to use
///
/// </param>
/// <param name="doterm">If true it performs an MQ-coder termination after the end
/// of the pass
///
/// </param>
/// <param name="bp">The bit-plane to code
///
/// </param>
/// <param name="state">The state information for the code-block
///
/// </param>
/// <param name="fm">The distortion estimation lookup table for MR
///
/// </param>
/// <param name="symbuf">The buffer to hold symbols to send to the MQ coder
///
/// </param>
/// <param name="ctxtbuf">A buffer to hold the contexts to use in sending the
/// buffered symbols to the MQ coder.
///
/// </param>
/// <param name="ratebuf">The buffer where to store the rate (i.e. coded lenth) at
/// the end of this coding pass.
///
/// </param>
/// <param name="pidx">The coding pass index. Is the index in the 'ratebuf' array
/// where to store the coded length after this coding pass.
///
/// </param>
/// <param name="ltpidx">The index of the last pass that was terminated, or
/// negative if none.
///
/// </param>
/// <param name="options">The bitmask of entropy coding options to apply to the
/// code-block
///
/// </param>
/// <returns> The decrease in distortion for this pass, in the fixed-point
/// normalized representation of the 'FS_LOSSY' and 'FS_LOSSLESS' tables.
///
/// </returns>
static private int magRefPass(CBlkWTData srcblk, MQCoder mq, bool doterm, int bp, int[] state, int[] fm, int[] symbuf, int[] ctxtbuf, int[] ratebuf, int pidx, int ltpidx, int options)
{
int j, sj; // The state index for line and stripe
int k, sk; // The data index for line and stripe
int nsym = 0; // Symbol counter for symbol and context buffers
int dscanw; // The data scan-width
int sscanw; // The state scan-width
int jstep; // Stripe to stripe step for 'sj'
int kstep; // Stripe to stripe step for 'sk'
int stopsk; // The loop limit on the variable sk
int csj; // Local copy (i.e. cached) of 'state[j]'
int mask; // The mask for the current bit-plane
int[] data; // The data buffer
int dist; // The distortion reduction for this pass
int shift; // Shift amount for distortion
int upshift; // Shift left amount for distortion
int downshift; // Shift right amount for distortion
int normval; // The normalized sample magnitude value
int s; // The stripe index
int nstripes; // The number of stripes in the code-block
int sheight; // Height of the current stripe
// Initialize local variables
dscanw = srcblk.scanw;
sscanw = srcblk.w + 2;
jstep = sscanw * CSJ2K.j2k.entropy.StdEntropyCoderOptions.STRIPE_HEIGHT / 2 - srcblk.w;
kstep = dscanw * CSJ2K.j2k.entropy.StdEntropyCoderOptions.STRIPE_HEIGHT - srcblk.w;
mask = 1 << bp;
data = (int[]) srcblk.Data;
nstripes = (srcblk.h + CSJ2K.j2k.entropy.StdEntropyCoderOptions.STRIPE_HEIGHT - 1) / CSJ2K.j2k.entropy.StdEntropyCoderOptions.STRIPE_HEIGHT;
dist = 0;
// We use the bit just coded plus MSE_LKP_BITS-1 bits below the bit
// just coded for distortion estimation.
shift = bp - (MSE_LKP_BITS - 1);
upshift = (shift >= 0)?0:- shift;
downshift = (shift <= 0)?0:shift;
// Code stripe by stripe
sk = srcblk.offset;
sj = sscanw + 1;
for (s = nstripes - 1; s >= 0; s--, sk += kstep, sj += jstep)
{
sheight = (s != 0)?CSJ2K.j2k.entropy.StdEntropyCoderOptions.STRIPE_HEIGHT:srcblk.h - (nstripes - 1) * CSJ2K.j2k.entropy.StdEntropyCoderOptions.STRIPE_HEIGHT;
stopsk = sk + srcblk.w;
// Scan by set of 1 stripe column at a time
for (nsym = 0; sk < stopsk; sk++, sj++)
{
// Do half top of column
j = sj;
csj = state[j];
// If any of the two samples is significant and not yet
// visited in the current bit-plane we can not skip them
if ((((SupportClass.URShift(csj, 1)) & (~ csj)) & VSTD_MASK_R1R2) != 0)
{
k = sk;
// Scan first row
if ((csj & (STATE_SIG_R1 | STATE_VISITED_R1)) == STATE_SIG_R1)
{
// Apply MR primitive
symbuf[nsym] = SupportClass.URShift((data[k] & mask), bp);
ctxtbuf[nsym++] = MR_LUT[csj & MR_MASK];
// Update the STATE_PREV_MR bit
csj |= STATE_PREV_MR_R1;
// Update distortion
normval = (data[k] >> downshift) << upshift;
dist += fm[normval & ((1 << MSE_LKP_BITS) - 1)];
}
if (sheight < 2)
{
state[j] = csj;
continue;
}
// Scan second row
if ((csj & (STATE_SIG_R2 | STATE_VISITED_R2)) == STATE_SIG_R2)
{
k += dscanw;
// Apply MR primitive
symbuf[nsym] = SupportClass.URShift((data[k] & mask), bp);
ctxtbuf[nsym++] = MR_LUT[(SupportClass.URShift(csj, STATE_SEP)) & MR_MASK];
// Update the STATE_PREV_MR bit
csj |= STATE_PREV_MR_R2;
// Update distortion
normval = (data[k] >> downshift) << upshift;
dist += fm[normval & ((1 << MSE_LKP_BITS) - 1)];
}
state[j] = csj;
}
// Do half bottom of column
if (sheight < 3)
continue;
j += sscanw;
csj = state[j];
// If any of the two samples is significant and not yet
// visited in the current bit-plane we can not skip them
if ((((SupportClass.URShift(csj, 1)) & (~ csj)) & VSTD_MASK_R1R2) != 0)
{
k = sk + (dscanw << 1);
// Scan first row
if ((csj & (STATE_SIG_R1 | STATE_VISITED_R1)) == STATE_SIG_R1)
{
// Apply MR primitive
symbuf[nsym] = SupportClass.URShift((data[k] & mask), bp);
ctxtbuf[nsym++] = MR_LUT[csj & MR_MASK];
// Update the STATE_PREV_MR bit
csj |= STATE_PREV_MR_R1;
// Update distortion
normval = (data[k] >> downshift) << upshift;
dist += fm[normval & ((1 << MSE_LKP_BITS) - 1)];
}
if (sheight < 4)
{
state[j] = csj;
continue;
}
// Scan second row
if ((state[j] & (STATE_SIG_R2 | STATE_VISITED_R2)) == STATE_SIG_R2)
{
k += dscanw;
// Apply MR primitive
symbuf[nsym] = SupportClass.URShift((data[k] & mask), bp);
ctxtbuf[nsym++] = MR_LUT[(SupportClass.URShift(csj, STATE_SEP)) & MR_MASK];
// Update the STATE_PREV_MR bit
csj |= STATE_PREV_MR_R2;
// Update distortion
normval = (data[k] >> downshift) << upshift;
dist += fm[normval & ((1 << MSE_LKP_BITS) - 1)];
}
state[j] = csj;
}
}
// Code all buffered symbols, if any
if (nsym > 0)
mq.codeSymbols(symbuf, ctxtbuf, nsym);
}
// Reset the MQ context states if we need to
if ((options & CSJ2K.j2k.entropy.StdEntropyCoderOptions.OPT_RESET_MQ) != 0)
{
mq.resetCtxts();
}
// Terminate the MQ bit stream if we need to
if (doterm)
{
ratebuf[pidx] = mq.terminate(); // Termination has special length
}
else
{
// Use normal length calculation
ratebuf[pidx] = mq.NumCodedBytes;
}
// Add length of previous segments, if any
if (ltpidx >= 0)
{
ratebuf[pidx] += ratebuf[ltpidx];
}
// Finish length calculation if needed
if (doterm)
{
mq.finishLengthCalculation(ratebuf, pidx);
}
// Return the reduction in distortion
return dist;
}
/// <summary> Performs the magnitude refinement pass on the specified data and
/// bit-plane, without using the arithmetic coder. It codes the samples
/// which are significant and which do not have the "visited" state bit
/// turned on, using the MR primitive. The "visited" state bit is not
/// mofified for any samples.
///
/// <p>In this method, the arithmetic coder is bypassed, and raw bits are
/// directly written in the bit stream (useful when distribution are close
/// to uniform, for intance, at high bit-rates and at lossless
/// compression). The 'STATE_PREV_MR_R1' and 'STATE_PREV_MR_R2' bits are
/// not set because they are used only when the arithmetic coder is not
/// bypassed.</p>
///
/// </summary>
/// <param name="srcblk">The code-block data to code
///
/// </param>
/// <param name="bout">The bit based output
///
/// </param>
/// <param name="doterm">If true the bit based output is byte aligned after the
/// end of the pass.
///
/// </param>
/// <param name="bp">The bit-plane to code
///
/// </param>
/// <param name="state">The state information for the code-block
///
/// </param>
/// <param name="fm">The distortion estimation lookup table for MR
///
/// </param>
/// <param name="ratebuf">The buffer where to store the rate (i.e. coded lenth) at
/// the end of this coding pass.
///
/// </param>
/// <param name="pidx">The coding pass index. Is the index in the 'ratebuf' array
/// where to store the coded length after this coding pass.
///
/// </param>
/// <param name="ltpidx">The index of the last pass that was terminated, or
/// negative if none.
///
/// </param>
/// <param name="options">The bitmask of entropy coding options to apply to the
/// code-block
///
/// </param>
/// <returns> The decrease in distortion for this pass, in the fixed-point
/// normalized representation of the 'FS_LOSSY' and 'FS_LOSSLESS' tables.
///
/// </returns>
static private int rawMagRefPass(CBlkWTData srcblk, BitToByteOutput bout, bool doterm, int bp, int[] state, int[] fm, int[] ratebuf, int pidx, int ltpidx, int options)
{
int j, sj; // The state index for line and stripe
int k, sk; // The data index for line and stripe
int dscanw; // The data scan-width
int sscanw; // The state scan-width
int jstep; // Stripe to stripe step for 'sj'
int kstep; // Stripe to stripe step for 'sk'
int stopsk; // The loop limit on the variable sk
int csj; // Local copy (i.e. cached) of 'state[j]'
int mask; // The mask for the current bit-plane
int[] data; // The data buffer
int dist; // The distortion reduction for this pass
int shift; // Shift amount for distortion
int upshift; // Shift left amount for distortion
int downshift; // Shift right amount for distortion
int normval; // The normalized sample magnitude value
int s; // The stripe index
int nstripes; // The number of stripes in the code-block
int sheight; // Height of the current stripe
int nsym = 0;
// Initialize local variables
dscanw = srcblk.scanw;
sscanw = srcblk.w + 2;
jstep = sscanw * CSJ2K.j2k.entropy.StdEntropyCoderOptions.STRIPE_HEIGHT / 2 - srcblk.w;
kstep = dscanw * CSJ2K.j2k.entropy.StdEntropyCoderOptions.STRIPE_HEIGHT - srcblk.w;
mask = 1 << bp;
data = (int[]) srcblk.Data;
nstripes = (srcblk.h + CSJ2K.j2k.entropy.StdEntropyCoderOptions.STRIPE_HEIGHT - 1) / CSJ2K.j2k.entropy.StdEntropyCoderOptions.STRIPE_HEIGHT;
dist = 0;
// We use the bit just coded plus MSE_LKP_BITS-1 bits below the bit
// just coded for distortion estimation.
shift = bp - (MSE_LKP_BITS - 1);
upshift = (shift >= 0)?0:- shift;
downshift = (shift <= 0)?0:shift;
// Code stripe by stripe
sk = srcblk.offset;
sj = sscanw + 1;
for (s = nstripes - 1; s >= 0; s--, sk += kstep, sj += jstep)
{
sheight = (s != 0)?CSJ2K.j2k.entropy.StdEntropyCoderOptions.STRIPE_HEIGHT:srcblk.h - (nstripes - 1) * CSJ2K.j2k.entropy.StdEntropyCoderOptions.STRIPE_HEIGHT;
stopsk = sk + srcblk.w;
// Scan by set of 1 stripe column at a time
for (; sk < stopsk; sk++, sj++)
{
// Do half top of column
j = sj;
csj = state[j];
// If any of the two samples is significant and not yet
// visited in the current bit-plane we can not skip them
if ((((SupportClass.URShift(csj, 1)) & (~ csj)) & VSTD_MASK_R1R2) != 0)
{
k = sk;
// Scan first row
if ((csj & (STATE_SIG_R1 | STATE_VISITED_R1)) == STATE_SIG_R1)
{
// Code bit "raw"
bout.writeBit(SupportClass.URShift((data[k] & mask), bp));
nsym++;
// No need to set STATE_PREV_MR_R1 since all magnitude
// refinement passes to follow are "raw"
// Update distortion
normval = (data[k] >> downshift) << upshift;
dist += fm[normval & ((1 << MSE_LKP_BITS) - 1)];
}
if (sheight < 2)
continue;
// Scan second row
if ((csj & (STATE_SIG_R2 | STATE_VISITED_R2)) == STATE_SIG_R2)
{
k += dscanw;
// Code bit "raw"
bout.writeBit(SupportClass.URShift((data[k] & mask), bp));
nsym++;
// No need to set STATE_PREV_MR_R2 since all magnitude
// refinement passes to follow are "raw"
// Update distortion
normval = (data[k] >> downshift) << upshift;
dist += fm[normval & ((1 << MSE_LKP_BITS) - 1)];
}
}
// Do half bottom of column
if (sheight < 3)
continue;
j += sscanw;
csj = state[j];
// If any of the two samples is significant and not yet
// visited in the current bit-plane we can not skip them
if ((((SupportClass.URShift(csj, 1)) & (~ csj)) & VSTD_MASK_R1R2) != 0)
{
k = sk + (dscanw << 1);
// Scan first row
if ((csj & (STATE_SIG_R1 | STATE_VISITED_R1)) == STATE_SIG_R1)
{
// Code bit "raw"
bout.writeBit(SupportClass.URShift((data[k] & mask), bp));
nsym++;
// No need to set STATE_PREV_MR_R1 since all magnitude
// refinement passes to follow are "raw"
// Update distortion
normval = (data[k] >> downshift) << upshift;
dist += fm[normval & ((1 << MSE_LKP_BITS) - 1)];
}
if (sheight < 4)
continue;
// Scan second row
if ((state[j] & (STATE_SIG_R2 | STATE_VISITED_R2)) == STATE_SIG_R2)
{
k += dscanw;
// Code bit "raw"
bout.writeBit(SupportClass.URShift((data[k] & mask), bp));
nsym++;
// No need to set STATE_PREV_MR_R2 since all magnitude
// refinement passes to follow are "raw"
// Update distortion
normval = (data[k] >> downshift) << upshift;
dist += fm[normval & ((1 << MSE_LKP_BITS) - 1)];
}
}
}
}
// Get length and terminate if needed
if (doterm)
{
ratebuf[pidx] = bout.terminate();
}
else
{
ratebuf[pidx] = bout.length();
}
// Add length of previous segments, if any
if (ltpidx >= 0)
{
ratebuf[pidx] += ratebuf[ltpidx];
}
// Return the reduction in distortion
return dist;
}
/// <summary> Calculates the number of magnitude bit-planes that are to be skipped,
/// because they are non-significant. The algorithm looks for the largest
/// magnitude and calculates the most significant bit-plane of it.
///
/// </summary>
/// <param name="cblk">The code-block of data to scan
///
/// </param>
/// <param name="lmb">The least significant magnitude bit in the data
///
/// </param>
/// <returns> The number of magnitude bit-planes to skip (i.e. all zero most
/// significant bit-planes).
///
/// </returns>
static private int calcSkipMSBP(CBlkWTData cblk, int lmb)
{
int k, kmax, mask;
int[] data;
int maxmag;
int mag;
int w, h;
int msbp;
int l;
data = (int[]) cblk.Data;
w = cblk.w;
h = cblk.h;
// First look for the maximum magnitude in the code-block
maxmag = 0;
// Consider only magnitude bits that are in non-fractional bit-planes.
mask = 0x7FFFFFFF & (~ ((1 << lmb) - 1));
for (l = h - 1, k = cblk.offset; l >= 0; l--)
{
for (kmax = k + w; k < kmax; k++)
{
mag = data[k] & mask;
if (mag > maxmag)
maxmag = mag;
}
k += cblk.scanw - w;
}
// Now calculate the number of all zero most significant
// bit-planes for the maximum magnitude.
msbp = 30;
do
{
if (((1 << msbp) & maxmag) != 0)
break;
msbp--;
}
while (msbp >= lmb);
// Return the number of non-significant bit-planes to skip
return 30 - msbp;
}
/// <summary> Performs the significance propagation pass on the specified data and
/// bit-plane, without using the arithmetic coder. It codes all
/// insignificant samples which have, at least, one of its immediate eight
/// neighbors already significant, using the ZC and SC primitives as
/// needed. It toggles the "visited" state bit to 1 for all those samples.
///
/// <p>In this method, the arithmetic coder is bypassed, and raw bits are
/// directly written in the bit stream (useful when distribution are close
/// to uniform, for intance, at high bit-rates and at lossless
/// compression).</p>
///
/// </summary>
/// <param name="srcblk">The code-block data to code
///
/// </param>
/// <param name="bout">The bit based output
///
/// </param>
/// <param name="doterm">If true the bit based output is byte aligned after the
/// end of the pass.
///
/// </param>
/// <param name="bp">The bit-plane to code
///
/// </param>
/// <param name="state">The state information for the code-block
///
/// </param>
/// <param name="fs">The distortion estimation lookup table for SC
///
/// </param>
/// <param name="ratebuf">The buffer where to store the rate (i.e. coded lenth) at
/// the end of this coding pass.
///
/// </param>
/// <param name="pidx">The coding pass index. Is the index in the 'ratebuf' array
/// where to store the coded length after this coding pass.
///
/// </param>
/// <param name="ltpidx">The index of the last pass that was terminated, or
/// negative if none.
///
/// </param>
/// <param name="options">The bitmask of entropy coding options to apply to the
/// code-block
///
/// </param>
/// <returns> The decrease in distortion for this pass, in the fixed-point
/// normalized representation of the 'FS_LOSSY' and 'FS_LOSSLESS' tables.
///
/// </returns>
static private int rawSigProgPass(CBlkWTData srcblk, BitToByteOutput bout, bool doterm, int bp, int[] state, int[] fs, int[] ratebuf, int pidx, int ltpidx, int options)
{
int j, sj; // The state index for line and stripe
int k, sk; // The data index for line and stripe
int dscanw; // The data scan-width
int sscanw; // The state scan-width
int jstep; // Stripe to stripe step for 'sj'
int kstep; // Stripe to stripe step for 'sk'
int stopsk; // The loop limit on the variable sk
int csj; // Local copy (i.e. cached) of 'state[j]'
int mask; // The mask for the current bit-plane
int nsym = 0; // Number of symbol
int sym; // The symbol to code
int[] data; // The data buffer
int dist; // The distortion reduction for this pass
int shift; // Shift amount for distortion
int upshift; // Shift left amount for distortion
int downshift; // Shift right amount for distortion
int normval; // The normalized sample magnitude value
int s; // The stripe index
bool causal; // Flag to indicate if stripe-causal context
// formation is to be used
int nstripes; // The number of stripes in the code-block
int sheight; // Height of the current stripe
int off_ul, off_ur, off_dr, off_dl; // offsets
// Initialize local variables
dscanw = srcblk.scanw;
sscanw = srcblk.w + 2;
jstep = sscanw * CSJ2K.j2k.entropy.StdEntropyCoderOptions.STRIPE_HEIGHT / 2 - srcblk.w;
kstep = dscanw * CSJ2K.j2k.entropy.StdEntropyCoderOptions.STRIPE_HEIGHT - srcblk.w;
mask = 1 << bp;
data = (int[]) srcblk.Data;
nstripes = (srcblk.h + CSJ2K.j2k.entropy.StdEntropyCoderOptions.STRIPE_HEIGHT - 1) / CSJ2K.j2k.entropy.StdEntropyCoderOptions.STRIPE_HEIGHT;
dist = 0;
// We use the MSE_LKP_BITS-1 bits below the bit just coded for
// distortion estimation.
shift = bp - (MSE_LKP_BITS - 1);
upshift = (shift >= 0)?0:- shift;
downshift = (shift <= 0)?0:shift;
causal = (options & CSJ2K.j2k.entropy.StdEntropyCoderOptions.OPT_VERT_STR_CAUSAL) != 0;
// Pre-calculate offsets in 'state' for neighbors
off_ul = - sscanw - 1; // up-left
off_ur = - sscanw + 1; // up-right
off_dr = sscanw + 1; // down-right
off_dl = sscanw - 1; // down-left
// Code stripe by stripe
sk = srcblk.offset;
sj = sscanw + 1;
for (s = nstripes - 1; s >= 0; s--, sk += kstep, sj += jstep)
{
sheight = (s != 0)?CSJ2K.j2k.entropy.StdEntropyCoderOptions.STRIPE_HEIGHT:srcblk.h - (nstripes - 1) * CSJ2K.j2k.entropy.StdEntropyCoderOptions.STRIPE_HEIGHT;
stopsk = sk + srcblk.w;
// Scan by set of 1 stripe column at a time
for (; sk < stopsk; sk++, sj++)
{
// Do half top of column
j = sj;
csj = state[j];
// If any of the two samples is not significant and has a
// non-zero context (i.e. some neighbor is significant) we can
// not skip them
if ((((~ csj) & (csj << 2)) & SIG_MASK_R1R2) != 0)
{
k = sk;
// Scan first row
if ((csj & (STATE_SIG_R1 | STATE_NZ_CTXT_R1)) == STATE_NZ_CTXT_R1)
{
// Apply zero coding
sym = SupportClass.URShift((data[k] & mask), bp);
bout.writeBit(sym);
nsym++;
if (sym != 0)
{
// Became significant
// Apply sign coding
sym = SupportClass.URShift(data[k], 31);
bout.writeBit(sym);
nsym++;
// Update state information (significant bit,
// visited bit, neighbor significant bit of
// neighbors, non zero context of neighbors, sign
// of neighbors)
if (!causal)
{
// If in causal mode do not change contexts of
// previous stripe.
state[j + off_ul] |= STATE_NZ_CTXT_R2 | STATE_D_DR_R2;
state[j + off_ur] |= STATE_NZ_CTXT_R2 | STATE_D_DL_R2;
}
// Update sign state information of neighbors
if (sym != 0)
{
csj |= STATE_SIG_R1 | STATE_VISITED_R1 | STATE_NZ_CTXT_R2 | STATE_V_U_R2 | STATE_V_U_SIGN_R2;
if (!causal)
{
// If in causal mode do not change
// contexts of previous stripe.
state[j - sscanw] |= STATE_NZ_CTXT_R2 | STATE_V_D_R2 | STATE_V_D_SIGN_R2;
}
state[j + 1] |= STATE_NZ_CTXT_R1 | STATE_NZ_CTXT_R2 | STATE_H_L_R1 | STATE_H_L_SIGN_R1 | STATE_D_UL_R2;
state[j - 1] |= STATE_NZ_CTXT_R1 | STATE_NZ_CTXT_R2 | STATE_H_R_R1 | STATE_H_R_SIGN_R1 | STATE_D_UR_R2;
}
else
{
csj |= STATE_SIG_R1 | STATE_VISITED_R1 | STATE_NZ_CTXT_R2 | STATE_V_U_R2;
if (!causal)
{
// If in causal mode do not change
// contexts of previous stripe.
state[j - sscanw] |= STATE_NZ_CTXT_R2 | STATE_V_D_R2;
}
state[j + 1] |= STATE_NZ_CTXT_R1 | STATE_NZ_CTXT_R2 | STATE_H_L_R1 | STATE_D_UL_R2;
state[j - 1] |= STATE_NZ_CTXT_R1 | STATE_NZ_CTXT_R2 | STATE_H_R_R1 | STATE_D_UR_R2;
}
// Update distortion
normval = (data[k] >> downshift) << upshift;
dist += fs[normval & ((1 << (MSE_LKP_BITS - 1)) - 1)];
}
else
{
csj |= STATE_VISITED_R1;
}
}
if (sheight < 2)
{
state[j] = csj;
continue;
}
// Scan second row
if ((csj & (STATE_SIG_R2 | STATE_NZ_CTXT_R2)) == STATE_NZ_CTXT_R2)
{
k += dscanw;
// Apply zero coding
sym = SupportClass.URShift((data[k] & mask), bp);
bout.writeBit(sym);
nsym++;
if (sym != 0)
{
// Became significant
// Apply sign coding
sym = SupportClass.URShift(data[k], 31);
bout.writeBit(sym);
nsym++;
// Update state information (significant bit,
// visited bit, neighbor significant bit of
// neighbors, non zero context of neighbors, sign
// of neighbors)
state[j + off_dl] |= STATE_NZ_CTXT_R1 | STATE_D_UR_R1;
state[j + off_dr] |= STATE_NZ_CTXT_R1 | STATE_D_UL_R1;
// Update sign state information of neighbors
if (sym != 0)
{
csj |= STATE_SIG_R2 | STATE_VISITED_R2 | STATE_NZ_CTXT_R1 | STATE_V_D_R1 | STATE_V_D_SIGN_R1;
state[j + sscanw] |= STATE_NZ_CTXT_R1 | STATE_V_U_R1 | STATE_V_U_SIGN_R1;
state[j + 1] |= STATE_NZ_CTXT_R1 | STATE_NZ_CTXT_R2 | STATE_D_DL_R1 | STATE_H_L_R2 | STATE_H_L_SIGN_R2;
state[j - 1] |= STATE_NZ_CTXT_R1 | STATE_NZ_CTXT_R2 | STATE_D_DR_R1 | STATE_H_R_R2 | STATE_H_R_SIGN_R2;
}
else
{
csj |= STATE_SIG_R2 | STATE_VISITED_R2 | STATE_NZ_CTXT_R1 | STATE_V_D_R1;
state[j + sscanw] |= STATE_NZ_CTXT_R1 | STATE_V_U_R1;
state[j + 1] |= STATE_NZ_CTXT_R1 | STATE_NZ_CTXT_R2 | STATE_D_DL_R1 | STATE_H_L_R2;
state[j - 1] |= STATE_NZ_CTXT_R1 | STATE_NZ_CTXT_R2 | STATE_D_DR_R1 | STATE_H_R_R2;
}
// Update distortion
normval = (data[k] >> downshift) << upshift;
dist += fs[normval & ((1 << (MSE_LKP_BITS - 1)) - 1)];
}
else
{
csj |= STATE_VISITED_R2;
}
}
state[j] = csj;
}
// Do half bottom of column
if (sheight < 3)
continue;
j += sscanw;
csj = state[j];
// If any of the two samples is not significant and has a
// non-zero context (i.e. some neighbor is significant) we can
// not skip them
if ((((~ csj) & (csj << 2)) & SIG_MASK_R1R2) != 0)
{
k = sk + (dscanw << 1);
// Scan first row
if ((csj & (STATE_SIG_R1 | STATE_NZ_CTXT_R1)) == STATE_NZ_CTXT_R1)
{
sym = SupportClass.URShift((data[k] & mask), bp);
bout.writeBit(sym);
nsym++;
if (sym != 0)
{
// Became significant
// Apply sign coding
sym = SupportClass.URShift(data[k], 31);
bout.writeBit(sym);
nsym++;
// Update state information (significant bit,
// visited bit, neighbor significant bit of
// neighbors, non zero context of neighbors, sign
// of neighbors)
state[j + off_ul] |= STATE_NZ_CTXT_R2 | STATE_D_DR_R2;
state[j + off_ur] |= STATE_NZ_CTXT_R2 | STATE_D_DL_R2;
// Update sign state information of neighbors
if (sym != 0)
{
csj |= STATE_SIG_R1 | STATE_VISITED_R1 | STATE_NZ_CTXT_R2 | STATE_V_U_R2 | STATE_V_U_SIGN_R2;
state[j - sscanw] |= STATE_NZ_CTXT_R2 | STATE_V_D_R2 | STATE_V_D_SIGN_R2;
state[j + 1] |= STATE_NZ_CTXT_R1 | STATE_NZ_CTXT_R2 | STATE_H_L_R1 | STATE_H_L_SIGN_R1 | STATE_D_UL_R2;
state[j - 1] |= STATE_NZ_CTXT_R1 | STATE_NZ_CTXT_R2 | STATE_H_R_R1 | STATE_H_R_SIGN_R1 | STATE_D_UR_R2;
}
else
{
csj |= STATE_SIG_R1 | STATE_VISITED_R1 | STATE_NZ_CTXT_R2 | STATE_V_U_R2;
state[j - sscanw] |= STATE_NZ_CTXT_R2 | STATE_V_D_R2;
state[j + 1] |= STATE_NZ_CTXT_R1 | STATE_NZ_CTXT_R2 | STATE_H_L_R1 | STATE_D_UL_R2;
state[j - 1] |= STATE_NZ_CTXT_R1 | STATE_NZ_CTXT_R2 | STATE_H_R_R1 | STATE_D_UR_R2;
}
// Update distortion
normval = (data[k] >> downshift) << upshift;
dist += fs[normval & ((1 << (MSE_LKP_BITS - 1)) - 1)];
}
else
{
csj |= STATE_VISITED_R1;
}
}
if (sheight < 4)
{
state[j] = csj;
continue;
}
if ((csj & (STATE_SIG_R2 | STATE_NZ_CTXT_R2)) == STATE_NZ_CTXT_R2)
{
k += dscanw;
// Apply zero coding
sym = SupportClass.URShift((data[k] & mask), bp);
bout.writeBit(sym);
nsym++;
if (sym != 0)
{
// Became significant
// Apply sign coding
sym = SupportClass.URShift(data[k], 31);
bout.writeBit(sym);
nsym++;
// Update state information (significant bit,
// visited bit, neighbor significant bit of
// neighbors, non zero context of neighbors, sign
// of neighbors)
state[j + off_dl] |= STATE_NZ_CTXT_R1 | STATE_D_UR_R1;
state[j + off_dr] |= STATE_NZ_CTXT_R1 | STATE_D_UL_R1;
// Update sign state information of neighbors
if (sym != 0)
{
csj |= STATE_SIG_R2 | STATE_VISITED_R2 | STATE_NZ_CTXT_R1 | STATE_V_D_R1 | STATE_V_D_SIGN_R1;
state[j + sscanw] |= STATE_NZ_CTXT_R1 | STATE_V_U_R1 | STATE_V_U_SIGN_R1;
state[j + 1] |= STATE_NZ_CTXT_R1 | STATE_NZ_CTXT_R2 | STATE_D_DL_R1 | STATE_H_L_R2 | STATE_H_L_SIGN_R2;
state[j - 1] |= STATE_NZ_CTXT_R1 | STATE_NZ_CTXT_R2 | STATE_D_DR_R1 | STATE_H_R_R2 | STATE_H_R_SIGN_R2;
}
else
{
csj |= STATE_SIG_R2 | STATE_VISITED_R2 | STATE_NZ_CTXT_R1 | STATE_V_D_R1;
state[j + sscanw] |= STATE_NZ_CTXT_R1 | STATE_V_U_R1;
state[j + 1] |= STATE_NZ_CTXT_R1 | STATE_NZ_CTXT_R2 | STATE_D_DL_R1 | STATE_H_L_R2;
state[j - 1] |= STATE_NZ_CTXT_R1 | STATE_NZ_CTXT_R2 | STATE_D_DR_R1 | STATE_H_R_R2;
}
// Update distortion
normval = (data[k] >> downshift) << upshift;
dist += fs[normval & ((1 << (MSE_LKP_BITS - 1)) - 1)];
}
else
{
csj |= STATE_VISITED_R2;
}
}
state[j] = csj;
}
}
}
// Get length and terminate if needed
if (doterm)
{
ratebuf[pidx] = bout.terminate();
}
else
{
ratebuf[pidx] = bout.length();
}
// Add length of previous segments, if any
if (ltpidx >= 0)
{
ratebuf[pidx] += ratebuf[ltpidx];
}
// Return the reduction in distortion
return dist;
}
/// <summary> Returns the next code-block in the current tile for the specified
/// component. The order in which code-blocks are returned is not
/// specified. However each code-block is returned only once and all
/// code-blocks will be returned if the method is called 'N' times, where
/// 'N' is the number of code-blocks in the tile. After all the code-blocks
/// have been returned for the current tile calls to this method will
/// return 'null'.
///
/// <p>When changing the current tile (through 'setTile()' or 'nextTile()')
/// this method will always return the first code-block, as if this method
/// was never called before for the new current tile.</p>
///
/// <p>The data returned by this method is the data in the internal buffer
/// of this object, and thus can not be modified by the caller. The
/// 'offset' and 'scanw' of the returned data have, in general, some
/// non-zero value. The 'magbits' of the returned data is not set by this
/// method and should be ignored. See the 'CBlkWTData' class.</p>
///
/// <p>The 'ulx' and 'uly' members of the returned 'CBlkWTData' object
/// contain the coordinates of the top-left corner of the block, with
/// respect to the tile, not the subband.</p>
///
/// </summary>
/// <param name="c">The component for which to return the next code-block.
///
/// </param>
/// <param name="cblk">If non-null this object will be used to return the new
/// code-block. If null a new one will be allocated and returned.
///
/// </param>
/// <returns> The next code-block in the current tile for component 'n', or
/// null if all code-blocks for the current tile have been returned.
///
/// </returns>
/// <seealso cref="CBlkWTData">
///
/// </seealso>
public override CBlkWTData getNextInternCodeBlock(int c, CBlkWTData cblk)
{
int cbm, cbn, cn, cm;
int acb0x, acb0y;
SubbandAn sb;
intData = (filters.getWTDataType(tIdx, c) == DataBlk.TYPE_INT);
//If the source image has not been decomposed
if (decomposedComps[c] == null)
{
int k, w, h;
DataBlk bufblk;
System.Object dst_data;
w = getTileCompWidth(tIdx, c);
h = getTileCompHeight(tIdx, c);
//Get the source image data
if (intData)
{
decomposedComps[c] = new DataBlkInt(0, 0, w, h);
bufblk = new DataBlkInt();
}
else
{
decomposedComps[c] = new DataBlkFloat(0, 0, w, h);
bufblk = new DataBlkFloat();
}
// Get data from source line by line (this diminishes the memory
// requirements on the data source)
dst_data = decomposedComps[c].Data;
int lstart = getCompULX(c);
bufblk.ulx = lstart;
bufblk.w = w;
bufblk.h = 1;
int kk = getCompULY(c);
for (k = 0; k < h; k++, kk++)
{
bufblk.uly = kk;
bufblk.ulx = lstart;
bufblk = src.getInternCompData(bufblk, c);
// CONVERSION PROBLEM?
Array.Copy((System.Array)bufblk.Data, bufblk.offset, (System.Array)dst_data, k * w, w);
}
//Decompose source image
waveletTreeDecomposition(decomposedComps[c], getAnSubbandTree(tIdx, c), c);
// Make the first subband the current one
currentSubband[c] = getNextSubband(c);
lastn[c] = - 1;
lastm[c] = 0;
}
// Get the next code-block to "send"
do
{
// Calculate number of code-blocks in current subband
ncblks = currentSubband[c].numCb;
// Goto next code-block
lastn[c]++;
if (lastn[c] == ncblks.x)
{
// Got to end of this row of
// code-blocks
lastn[c] = 0;
lastm[c]++;
}
if (lastm[c] < ncblks.y)
{
// Not past the last code-block in the subband, we can return
// this code-block
break;
}
// If we get here we already sent all code-blocks in this subband,
// goto next subband
currentSubband[c] = getNextSubband(c);
lastn[c] = - 1;
lastm[c] = 0;
if (currentSubband[c] == null)
{
// We don't need the transformed data any more (a priori)
decomposedComps[c] = null;
// All code-blocks from all subbands in the current
// tile have been returned so we return a null
// reference
return null;
}
// Loop to find the next code-block
}
while (true);
// Project code-block partition origin to subband. Since the origin is
// always 0 or 1, it projects to the low-pass side (throught the ceil
// operator) as itself (i.e. no change) and to the high-pass side
// (through the floor operator) as 0, always.
acb0x = cb0x;
acb0y = cb0y;
switch (currentSubband[c].sbandIdx)
{
case Subband.WT_ORIENT_LL:
// No need to project since all low-pass => nothing to do
break;
case Subband.WT_ORIENT_HL:
acb0x = 0;
break;
case Subband.WT_ORIENT_LH:
acb0y = 0;
break;
case Subband.WT_ORIENT_HH:
acb0x = 0;
acb0y = 0;
break;
default:
throw new System.ApplicationException("Internal JJ2000 error");
}
// Initialize output code-block
if (cblk == null)
{
if (intData)
{
cblk = new CBlkWTDataInt();
}
else
{
cblk = new CBlkWTDataFloat();
}
}
cbn = lastn[c];
cbm = lastm[c];
sb = currentSubband[c];
cblk.n = cbn;
cblk.m = cbm;
cblk.sb = sb;
// Calculate the indexes of first code-block in subband with respect
// to the partitioning origin, to then calculate the position and size
// NOTE: when calculating "floor()" by integer division the dividend
// and divisor must be positive, we ensure that by adding the divisor
// to the dividend and then substracting 1 to the result of the
// division
cn = (sb.ulcx - acb0x + sb.nomCBlkW) / sb.nomCBlkW - 1;
cm = (sb.ulcy - acb0y + sb.nomCBlkH) / sb.nomCBlkH - 1;
if (cbn == 0)
{
// Left-most code-block, starts where subband starts
cblk.ulx = sb.ulx;
}
else
{
// Calculate starting canvas coordinate and convert to subb. coords
cblk.ulx = (cn + cbn) * sb.nomCBlkW - (sb.ulcx - acb0x) + sb.ulx;
}
if (cbm == 0)
{
// Bottom-most code-block, starts where subband starts
cblk.uly = sb.uly;
}
else
{
cblk.uly = (cm + cbm) * sb.nomCBlkH - (sb.ulcy - acb0y) + sb.uly;
}
if (cbn < ncblks.x - 1)
{
// Calculate where next code-block starts => width
cblk.w = (cn + cbn + 1) * sb.nomCBlkW - (sb.ulcx - acb0x) + sb.ulx - cblk.ulx;
}
else
{
// Right-most code-block, ends where subband ends
cblk.w = sb.ulx + sb.w - cblk.ulx;
}
if (cbm < ncblks.y - 1)
{
// Calculate where next code-block starts => height
cblk.h = (cm + cbm + 1) * sb.nomCBlkH - (sb.ulcy - acb0y) + sb.uly - cblk.uly;
}
else
{
// Bottom-most code-block, ends where subband ends
cblk.h = sb.uly + sb.h - cblk.uly;
}
cblk.wmseScaling = 1f;
// Since we are in getNextInternCodeBlock() we can return a
// reference to the internal buffer, no need to copy. Just initialize
// the 'offset' and 'scanw'
cblk.offset = cblk.uly * decomposedComps[c].w + cblk.ulx;
cblk.scanw = decomposedComps[c].w;
// For the data just put a reference to our buffer
cblk.Data = decomposedComps[c].Data;
// Return code-block
return cblk;
}
/// <summary> Returns the next code-block in the current tile for the specified
/// component, as a copy (see below). The order in which code-blocks are
/// returned is not specified. However each code-block is returned only
/// once and all code-blocks will be returned if the method is called 'N'
/// times, where 'N' is the number of code-blocks in the tile. After all
/// the code-blocks have been returned for the current tile calls to this
/// method will return 'null'.
///
/// <p>When changing the current tile (through 'setTile()' or 'nextTile()')
/// this method will always return the first code-block, as if this method
/// was never called before for the new current tile.</p>
///
/// <p>The data returned by this method is always a copy of the internal
/// data of this object, and it can be modified "in place" without
/// any problems after being returned. The 'offset' of the returned data is
/// 0, and the 'scanw' is the same as the code-block width. The 'magbits'
/// of the returned data is not set by this method and should be
/// ignored. See the 'CBlkWTData' class.</p>
///
/// <p>The 'ulx' and 'uly' members of the returned 'CBlkWTData' object
/// contain the coordinates of the top-left corner of the block, with
/// respect to the tile, not the subband.</p>
///
/// </summary>
/// <param name="c">The component for which to return the next code-block.
///
/// </param>
/// <param name="cblk">If non-null this object will be used to return the new
/// code-block. If null a new one will be allocated and returned. If the
/// "data" array of the object is non-null it will be reused, if possible,
/// to return the data.
///
/// </param>
/// <returns> The next code-block in the current tile for component 'c', or
/// null if all code-blocks for the current tile have been returned.
///
/// </returns>
/// <seealso cref="CBlkWTData">
///
/// </seealso>
public override CBlkWTData getNextCodeBlock(int c, CBlkWTData cblk)
{
// We can not directly use getNextInternCodeBlock() since that returns
// a reference to the internal buffer, we have to copy that data
int j, k;
int w;
System.Object dst_data; // a int[] or float[] object
int[] dst_data_int;
float[] dst_data_float;
System.Object src_data; // a int[] or float[] object
intData = (filters.getWTDataType(tIdx, c) == DataBlk.TYPE_INT);
dst_data = null;
// Cache the data array, if any
if (cblk != null)
{
dst_data = cblk.Data;
}
// Get the next code-block
cblk = getNextInternCodeBlock(c, cblk);
if (cblk == null)
{
return null; // No more code-blocks in current tile for component
// c
}
// Ensure size of output buffer
if (intData)
{
// int data
dst_data_int = (int[]) dst_data;
if (dst_data_int == null || dst_data_int.Length < cblk.w * cblk.h)
{
dst_data = new int[cblk.w * cblk.h];
}
}
else
{
// float data
dst_data_float = (float[]) dst_data;
if (dst_data_float == null || dst_data_float.Length < cblk.w * cblk.h)
{
dst_data = new float[cblk.w * cblk.h];
}
}
// Copy data line by line
src_data = cblk.Data;
w = cblk.w;
for (j = w * (cblk.h - 1), k = cblk.offset + (cblk.h - 1) * cblk.scanw; j >= 0; j -= w, k -= cblk.scanw)
{
// CONVERSION PROBLEM?
Array.Copy((System.Array)src_data, k, (System.Array)dst_data, j, w);
}
cblk.Data = dst_data;
cblk.offset = 0;
cblk.scanw = w;
return cblk;
}
/// <summary> This function gets a datablk from the entropy coder. The sample sin the
/// block, which consists of the quantized coefficients from the quantizer,
/// are scaled by the values given for any ROIs specified.
///
/// <p>The function calls on a ROIMaskGenerator to get the mask for scaling
/// the coefficients in the current block.</p>
///
/// <p>The data returned by this method is a copy of the orignal
/// data. Therfore it can be modified "in place" without any problems after
/// being returned. The 'offset' of the returned data is 0, and the 'scanw'
/// is the same as the code-block width. See the 'CBlkWTData' class.</p>
///
/// </summary>
/// <param name="c">The component for which to return the next code-block.
///
/// </param>
/// <param name="cblk">If non-null this object will be used to return the new
/// code-block. If null a new one will be allocated and returned. If the
/// "data" array of the object is non-null it will be reused, if possible,
/// to return the data.
///
/// </param>
/// <returns> The next code-block in the current tile for component 'n', or
/// null if all code-blocks for the current tile have been returned.
///
/// </returns>
/// <seealso cref="CBlkWTData">
///
/// </seealso>
public virtual CBlkWTData getNextCodeBlock(int c, CBlkWTData cblk)
{
return getNextInternCodeBlock(c, cblk);
}
/// <summary> This function gets a datablk from the entropy coder. The sample sin the
/// block, which consists of the quantized coefficients from the quantizer,
/// are scaled by the values given for any ROIs specified.
///
/// <p>The function calls on a ROIMaskGenerator to get the mask for scaling
/// the coefficients in the current block.</p>
///
/// </summary>
/// <param name="c">The component for which to return the next code-block.
///
/// </param>
/// <param name="cblk">If non-null this object will be used to return the new
/// code-block. If null a new one will be allocated and returned. If the
/// "data" array of the object is non-null it will be reused, if possible,
/// to return the data.
///
/// </param>
/// <returns> The next code-block in the current tile for component 'n', or
/// null if all code-blocks for the current tile have been returned.
///
/// </returns>
/// <seealso cref="CBlkWTData">
///
/// </seealso>
public virtual CBlkWTData getNextInternCodeBlock(int c, CBlkWTData cblk)
{
int mi, i, j, k, wrap;
int ulx, uly, w, h;
DataBlkInt mask = roiMask; // local copy of mask
int[] maskData; // local copy of mask data
int[] data; // local copy of quantized data
int tmp;
int bitMask = 0x7FFFFFFF;
SubbandAn root, sb;
int maxBits = 0; // local copy
bool roiInTile;
bool sbInMask;
int nROIcoeff = 0;
// Get codeblock's data from quantizer
cblk = src.getNextCodeBlock(c, cblk);
// If there is no ROI in the image, or if we already got all
// code-blocks
if (!roi || cblk == null)
{
return cblk;
}
data = (int[]) cblk.Data;
sb = cblk.sb;
ulx = cblk.ulx;
uly = cblk.uly;
w = cblk.w;
h = cblk.h;
sbInMask = (sb.resLvl <= useStartLevel);
// Check that there is an array for the mask and set it to zero
maskData = mask.DataInt; // local copy of mask data
if (maskData == null || w * h > maskData.Length)
{
maskData = new int[w * h];
mask.DataInt = maskData;
}
else
{
for (i = w * h - 1; i >= 0; i--)
maskData[i] = 0;
}
mask.ulx = ulx;
mask.uly = uly;
mask.w = w;
mask.h = h;
// Get ROI mask from generator
root = src.getAnSubbandTree(tIdx, c);
maxBits = maxMagBits[tIdx][c];
roiInTile = mg.getROIMask(mask, root, maxBits, c);
// If there is no ROI in this tile, return the code-block untouched
if (!roiInTile && (!sbInMask))
{
cblk.nROIbp = 0;
return cblk;
}
// Update field containing the number of ROI magnitude bit-planes
cblk.nROIbp = cblk.magbits;
// If the entire subband belongs to the ROI mask, The code-block is
// set to belong entirely to the ROI with the highest scaling value
if (sbInMask)
{
// Scale the wmse so that instead of scaling the coefficients, the
// wmse is scaled.
//UPGRADE_WARNING: Data types in Visual C# might be different. Verify the accuracy of narrowing conversions. "ms-help://MS.VSCC.v80/dv_commoner/local/redirect.htm?index='!DefaultContextWindowIndex'&keyword='jlca1042'"
cblk.wmseScaling *= (float) (1 << (maxBits << 1));
cblk.nROIcoeff = w * h;
return cblk;
}
// In 'block aligned' mode, the code-block is set to belong entirely
// to the ROI with the highest scaling value if one coefficient, at
// least, belongs to the ROI
if (blockAligned)
{
wrap = cblk.scanw - w;
mi = h * w - 1;
i = cblk.offset + cblk.scanw * (h - 1) + w - 1;
int nroicoeff = 0;
for (j = h; j > 0; j--)
{
for (k = w - 1; k >= 0; k--, i--, mi--)
{
if (maskData[mi] != 0)
{
nroicoeff++;
}
}
i -= wrap;
}
if (nroicoeff != 0)
{
// Include the subband
//UPGRADE_WARNING: Data types in Visual C# might be different. Verify the accuracy of narrowing conversions. "ms-help://MS.VSCC.v80/dv_commoner/local/redirect.htm?index='!DefaultContextWindowIndex'&keyword='jlca1042'"
cblk.wmseScaling *= (float) (1 << (maxBits << 1));
cblk.nROIcoeff = w * h;
}
return cblk;
}
// Scale background coefficients
bitMask = (((1 << cblk.magbits) - 1) << (31 - cblk.magbits));
wrap = cblk.scanw - w;
mi = h * w - 1;
i = cblk.offset + cblk.scanw * (h - 1) + w - 1;
for (j = h; j > 0; j--)
{
for (k = w; k > 0; k--, i--, mi--)
{
tmp = data[i];
if (maskData[mi] != 0)
{
// ROI coeff. We need to erase fractional bits to ensure
// that they do not conflict with BG coeffs. This is only
// strictly necessary for ROI coeffs. which non-fractional
// magnitude is zero, but much better BG quality can be
// achieved if done if reset to zero since coding zeros is
// much more efficient (the entropy coder knows nothing
// about ROI and cannot avoid coding the ROI fractional
// bits, otherwise this would not be necessary).
data[i] = (unchecked((int) 0x80000000) & tmp) | (tmp & bitMask);
nROIcoeff++;
}
else
{
// BG coeff. it is not necessary to erase fractional bits
data[i] = (unchecked((int) 0x80000000) & tmp) | ((tmp & 0x7FFFFFFF) >> maxBits);
}
}
i -= wrap;
}
// Modify the number of significant bit-planes in the code-block
cblk.magbits += maxBits;
// Store the number of ROI coefficients present in the code-block
cblk.nROIcoeff = nROIcoeff;
return cblk;
}
/// <summary> Returns the next code-block in the current tile for the specified
/// component. The order in which code-blocks are returned is not
/// specified. However each code-block is returned only once and all
/// code-blocks will be returned if the method is called 'N' times, where
/// 'N' is the number of code-blocks in the tile. After all the code-blocks
/// have been returned for the current tile calls to this method will
/// return 'null'.
///
/// <p>When changing the current tile (through 'setTile()' or 'nextTile()')
/// this method will always return the first code-block, as if this method
/// was never called before for the new current tile.</p>
///
/// <p>The data returned by this method can be the data in the internal
/// buffer of this object, if any, and thus can not be modified by the
/// caller. The 'offset' and 'scanw' of the returned data can be
/// arbitrary. See the 'CBlkWTData' class.</p>
///
/// <p>The 'ulx' and 'uly' members of the returned 'CBlkWTData' object
/// contain the coordinates of the top-left corner of the block, with
/// respect to the tile, not the subband.</p>
///
/// </summary>
/// <param name="c">The component for which to return the next code-block.
///
/// </param>
/// <param name="cblk">If non-null this object will be used to return the new
/// code-block. If null a new one will be allocated and returned. If the
/// "data" array of the object is non-null it will be reused, if possible,
/// to return the data.
///
/// </param>
/// <returns> The next code-block in the current tile for component 'n', or
/// null if all code-blocks for the current tile have been returned.
///
/// </returns>
/// <seealso cref="CBlkWTData">
///
/// </seealso>
public override CBlkWTData getNextInternCodeBlock(int c, CBlkWTData cblk)
{
// NOTE: this method is declared final since getNextCodeBlock() relies
// on this particular implementation
int k, j;
int tmp, shiftBits, jmin;
int w, h;
int[] outarr;
float[] infarr = null;
CBlkWTDataFloat infblk;
float invstep; // The inverse of the quantization step size
bool intq; // flag for quantizig ints
SubbandAn sb;
float stepUDR; // The quantization step size (for a dynamic
// range of 1, or unit)
int g = ((System.Int32) gbs.getTileCompVal(tIdx, c));
// Are we quantizing ints or floats?
intq = (src.getDataType(tIdx, c) == DataBlk.TYPE_INT);
// Check that we have an output object
if (cblk == null)
{
cblk = new CBlkWTDataInt();
}
// Cache input float code-block
infblk = this.infblk;
// Get data to quantize. When quantizing int data 'cblk' is used to
// get the data to quantize and to return the quantized data as well,
// that's why 'getNextCodeBlock()' is used. This can not be done when
// quantizing float data because of the different data types, that's
// why 'getNextInternCodeBlock()' is used in that case.
if (intq)
{
// Source data is int
cblk = src.getNextCodeBlock(c, cblk);
if (cblk == null)
{
return null; // No more code-blocks in current tile for comp.
}
// Input and output arrays are the same (for "in place" quant.)
outarr = (int[]) cblk.Data;
}
else
{
// Source data is float
// Can not use 'cblk' to get float data, use 'infblk'
infblk = (CBlkWTDataFloat) src.getNextInternCodeBlock(c, infblk);
if (infblk == null)
{
// Release buffer from infblk: this enables to garbage collect
// the big buffer when we are done with last code-block of
// component.
this.infblk.Data = null;
return null; // No more code-blocks in current tile for comp.
}
this.infblk = infblk; // Save local cache
infarr = (float[]) infblk.Data;
// Get output data array and check that there is memory to put the
// quantized coeffs in
outarr = (int[]) cblk.Data;
if (outarr == null || outarr.Length < infblk.w * infblk.h)
{
outarr = new int[infblk.w * infblk.h];
cblk.Data = outarr;
}
cblk.m = infblk.m;
cblk.n = infblk.n;
cblk.sb = infblk.sb;
cblk.ulx = infblk.ulx;
cblk.uly = infblk.uly;
cblk.w = infblk.w;
cblk.h = infblk.h;
cblk.wmseScaling = infblk.wmseScaling;
cblk.offset = 0;
cblk.scanw = cblk.w;
}
// Cache width, height and subband of code-block
w = cblk.w;
h = cblk.h;
sb = cblk.sb;
if (isReversible(tIdx, c))
{
// Reversible only for int data
cblk.magbits = g - 1 + src.getNomRangeBits(c) + sb.anGainExp;
shiftBits = 31 - cblk.magbits;
// Update the convertFactor field
cblk.convertFactor = (1 << shiftBits);
// Since we used getNextCodeBlock() to get the int data then
// 'offset' is 0 and 'scanw' is the width of the code-block The
// input and output arrays are the same (i.e. "in place")
for (j = w * h - 1; j >= 0; j--)
{
tmp = (outarr[j] << shiftBits);
outarr[j] = ((tmp < 0)?(1 << 31) | (- tmp):tmp);
}
}
else
{
// Non-reversible, use step size
//UPGRADE_TODO: The equivalent in .NET for method 'java.lang.Float.floatValue' may return a different value. "ms-help://MS.VSCC.v80/dv_commoner/local/redirect.htm?index='!DefaultContextWindowIndex'&keyword='jlca1043'"
float baseStep = (float) ((System.Single) qsss.getTileCompVal(tIdx, c));
// Calculate magnitude bits and quantization step size
if (isDerived(tIdx, c))
{
//UPGRADE_WARNING: Data types in Visual C# might be different. Verify the accuracy of narrowing conversions. "ms-help://MS.VSCC.v80/dv_commoner/local/redirect.htm?index='!DefaultContextWindowIndex'&keyword='jlca1042'"
cblk.magbits = g - 1 + sb.level - (int) System.Math.Floor(System.Math.Log(baseStep) / log2);
stepUDR = baseStep / (1 << sb.level);
}
else
{
//UPGRADE_WARNING: Data types in Visual C# might be different. Verify the accuracy of narrowing conversions. "ms-help://MS.VSCC.v80/dv_commoner/local/redirect.htm?index='!DefaultContextWindowIndex'&keyword='jlca1042'"
cblk.magbits = g - 1 - (int) System.Math.Floor(System.Math.Log(baseStep / (sb.l2Norm * (1 << sb.anGainExp))) / log2);
stepUDR = baseStep / (sb.l2Norm * (1 << sb.anGainExp));
}
shiftBits = 31 - cblk.magbits;
// Calculate step that decoder will get and use that one.
stepUDR = convertFromExpMantissa(convertToExpMantissa(stepUDR));
invstep = 1.0f / ((1L << (src.getNomRangeBits(c) + sb.anGainExp)) * stepUDR);
// Normalize to magnitude bits (output fractional point)
invstep *= (1 << (shiftBits - src.getFixedPoint(c)));
// Update convertFactor and stepSize fields
cblk.convertFactor = invstep;
cblk.stepSize = ((1L << (src.getNomRangeBits(c) + sb.anGainExp)) * stepUDR);
if (intq)
{
// Quantizing int data
// Since we used getNextCodeBlock() to get the int data then
// 'offset' is 0 and 'scanw' is the width of the code-block
// The input and output arrays are the same (i.e. "in place")
for (j = w * h - 1; j >= 0; j--)
{
//UPGRADE_WARNING: Data types in Visual C# might be different. Verify the accuracy of narrowing conversions. "ms-help://MS.VSCC.v80/dv_commoner/local/redirect.htm?index='!DefaultContextWindowIndex'&keyword='jlca1042'"
tmp = (int) (outarr[j] * invstep);
outarr[j] = ((tmp < 0)?(1 << 31) | (- tmp):tmp);
}
}
else
{
// Quantizing float data
for (j = w * h - 1, k = infblk.offset + (h - 1) * infblk.scanw + w - 1, jmin = w * (h - 1); j >= 0; jmin -= w)
{
for (; j >= jmin; k--, j--)
{
//UPGRADE_WARNING: Data types in Visual C# might be different. Verify the accuracy of narrowing conversions. "ms-help://MS.VSCC.v80/dv_commoner/local/redirect.htm?index='!DefaultContextWindowIndex'&keyword='jlca1042'"
tmp = (int) (infarr[k] * invstep);
outarr[j] = ((tmp < 0)?(1 << 31) | (- tmp):tmp);
}
// Jump to beggining of previous line in input
k -= (infblk.scanw - w);
}
}
}
// Return the quantized code-block
return cblk;
}
/// <summary> Returns the next code-block in the current tile for the specified
/// component, as a copy (see below). The order in which code-blocks are
/// returned is not specified. However each code-block is returned only
/// once and all code-blocks will be returned if the method is called 'N'
/// times, where 'N' is the number of code-blocks in the tile. After all
/// the code-blocks have been returned for the current tile calls to this
/// method will return 'null'.
///
/// <p>When changing the current tile (through 'setTile()' or 'nextTile()')
/// this method will always return the first code-block, as if this method
/// was never called before for the new current tile.</p>
///
/// <p>The data returned by this method is always a copy of the
/// data. Therfore it can be modified "in place" without any problems after
/// being returned. The 'offset' of the returned data is 0, and the 'scanw'
/// is the same as the code-block width. See the 'CBlkWTData' class.</p>
///
/// <p>The 'ulx' and 'uly' members of the returned 'CBlkWTData' object
/// contain the coordinates of the top-left corner of the block, with
/// respect to the tile, not the subband.</p>
///
/// </summary>
/// <param name="c">The component for which to return the next code-block.
///
/// </param>
/// <param name="cblk">If non-null this object will be used to return the new
/// code-block. If null a new one will be allocated and returned. If the
/// "data" array of the object is non-null it will be reused, if possible,
/// to return the data.
///
/// </param>
/// <returns> The next code-block in the current tile for component 'n', or
/// null if all code-blocks for the current tile have been returned.
///
/// </returns>
/// <seealso cref="CBlkWTData">
///
/// </seealso>
public override CBlkWTData getNextCodeBlock(int c, CBlkWTData cblk)
{
return getNextInternCodeBlock(c, cblk);
}
/// <summary> Returns the next code-block in the current tile for the specified
/// component, as a copy (see below). The order in which code-blocks are
/// returned is not specified. However each code-block is returned only
/// once and all code-blocks will be returned if the method is called 'N'
/// times, where 'N' is the number of code-blocks in the tile. After all
/// the code-blocks have been returned for the current tile calls to this
/// method will return 'null'.
///
/// <p>When changing the current tile (through 'setTile()' or 'nextTile()')
/// this method will always return the first code-block, as if this method
/// was never called before for the new current tile.</p>
///
/// <p>The data returned by this method is always a copy of the internal
/// data of this object, and it can be modified "in place" without
/// any problems after being returned. The 'offset' of the returned data is
/// 0, and the 'scanw' is the same as the code-block width. The 'magbits'
/// of the returned data is not set by this method and should be
/// ignored. See the 'CBlkWTData' class.</p>
///
/// <p>The 'ulx' and 'uly' members of the returned 'CBlkWTData' object
/// contain the coordinates of the top-left corner of the block, with
/// respect to the tile, not the subband.</p>
///
/// </summary>
/// <param name="c">The component for which to return the next code-block.
///
/// </param>
/// <param name="cblk">If non-null this object will be used to return the new
/// code-block. If null a new one will be allocated and returned. If the
/// "data" array of the object is non-null it will be reused, if possible,
/// to return the data.
///
/// </param>
/// <returns> The next code-block in the current tile for component 'c', or
/// null if all code-blocks for the current tile have been returned.
///
/// </returns>
/// <seealso cref="CBlkWTData">
///
/// </seealso>
public override CBlkWTData getNextCodeBlock(int c, CBlkWTData cblk)
{
// We can not directly use getNextInternCodeBlock() since that returns
// a reference to the internal buffer, we have to copy that data
int j, k;
int w;
System.Object dst_data; // a int[] or float[] object
int[] dst_data_int;
float[] dst_data_float;
System.Object src_data; // a int[] or float[] object
intData = (filters.getWTDataType(tIdx, c) == DataBlk.TYPE_INT);
dst_data = null;
// Cache the data array, if any
if (cblk != null)
{
dst_data = cblk.Data;
}
// Get the next code-block
cblk = getNextInternCodeBlock(c, cblk);
if (cblk == null)
{
return(null); // No more code-blocks in current tile for component
// c
}
// Ensure size of output buffer
if (intData)
{
// int data
dst_data_int = (int[])dst_data;
if (dst_data_int == null || dst_data_int.Length < cblk.w * cblk.h)
{
dst_data = new int[cblk.w * cblk.h];
}
}
else
{
// float data
dst_data_float = (float[])dst_data;
if (dst_data_float == null || dst_data_float.Length < cblk.w * cblk.h)
{
dst_data = new float[cblk.w * cblk.h];
}
}
// Copy data line by line
src_data = cblk.Data;
w = cblk.w;
for (j = w * (cblk.h - 1), k = cblk.offset + (cblk.h - 1) * cblk.scanw; j >= 0; j -= w, k -= cblk.scanw)
{
// CONVERSION PROBLEM?
Array.Copy((System.Array)src_data, k, (System.Array)dst_data, j, w);
}
cblk.Data = dst_data;
cblk.offset = 0;
cblk.scanw = w;
return(cblk);
}
/// <summary> Returns the next code-block in the current tile for the specified
/// component. The order in which code-blocks are returned is not
/// specified. However each code-block is returned only once and all
/// code-blocks will be returned if the method is called 'N' times, where
/// 'N' is the number of code-blocks in the tile. After all the code-blocks
/// have been returned for the current tile calls to this method will
/// return 'null'.
///
/// <p>When changing the current tile (through 'setTile()' or 'nextTile()')
/// this method will always return the first code-block, as if this method
/// was never called before for the new current tile.</p>
///
/// <p>The data returned by this method is the data in the internal buffer
/// of this object, and thus can not be modified by the caller. The
/// 'offset' and 'scanw' of the returned data have, in general, some
/// non-zero value. The 'magbits' of the returned data is not set by this
/// method and should be ignored. See the 'CBlkWTData' class.</p>
///
/// <p>The 'ulx' and 'uly' members of the returned 'CBlkWTData' object
/// contain the coordinates of the top-left corner of the block, with
/// respect to the tile, not the subband.</p>
///
/// </summary>
/// <param name="c">The component for which to return the next code-block.
///
/// </param>
/// <param name="cblk">If non-null this object will be used to return the new
/// code-block. If null a new one will be allocated and returned.
///
/// </param>
/// <returns> The next code-block in the current tile for component 'n', or
/// null if all code-blocks for the current tile have been returned.
///
/// </returns>
/// <seealso cref="CBlkWTData">
///
/// </seealso>
public override CBlkWTData getNextInternCodeBlock(int c, CBlkWTData cblk)
{
int cbm, cbn, cn, cm;
int acb0x, acb0y;
SubbandAn sb;
intData = (filters.getWTDataType(tIdx, c) == DataBlk.TYPE_INT);
//If the source image has not been decomposed
if (decomposedComps[c] == null)
{
int k, w, h;
DataBlk bufblk;
System.Object dst_data;
w = getTileCompWidth(tIdx, c);
h = getTileCompHeight(tIdx, c);
//Get the source image data
if (intData)
{
decomposedComps[c] = new DataBlkInt(0, 0, w, h);
bufblk = new DataBlkInt();
}
else
{
decomposedComps[c] = new DataBlkFloat(0, 0, w, h);
bufblk = new DataBlkFloat();
}
// Get data from source line by line (this diminishes the memory
// requirements on the data source)
dst_data = decomposedComps[c].Data;
int lstart = getCompULX(c);
bufblk.ulx = lstart;
bufblk.w = w;
bufblk.h = 1;
int kk = getCompULY(c);
for (k = 0; k < h; k++, kk++)
{
bufblk.uly = kk;
bufblk.ulx = lstart;
bufblk = src.getInternCompData(bufblk, c);
// CONVERSION PROBLEM?
Array.Copy((System.Array)bufblk.Data, bufblk.offset, (System.Array)dst_data, k * w, w);
}
//Decompose source image
waveletTreeDecomposition(decomposedComps[c], getAnSubbandTree(tIdx, c), c);
// Make the first subband the current one
currentSubband[c] = getNextSubband(c);
lastn[c] = -1;
lastm[c] = 0;
}
// Get the next code-block to "send"
do
{
// Calculate number of code-blocks in current subband
ncblks = currentSubband[c].numCb;
// Goto next code-block
lastn[c]++;
if (lastn[c] == ncblks.x)
{
// Got to end of this row of
// code-blocks
lastn[c] = 0;
lastm[c]++;
}
if (lastm[c] < ncblks.y)
{
// Not past the last code-block in the subband, we can return
// this code-block
break;
}
// If we get here we already sent all code-blocks in this subband,
// goto next subband
currentSubband[c] = getNextSubband(c);
lastn[c] = -1;
lastm[c] = 0;
if (currentSubband[c] == null)
{
// We don't need the transformed data any more (a priori)
decomposedComps[c] = null;
// All code-blocks from all subbands in the current
// tile have been returned so we return a null
// reference
return(null);
}
// Loop to find the next code-block
}while (true);
// Project code-block partition origin to subband. Since the origin is
// always 0 or 1, it projects to the low-pass side (throught the ceil
// operator) as itself (i.e. no change) and to the high-pass side
// (through the floor operator) as 0, always.
acb0x = cb0x;
acb0y = cb0y;
switch (currentSubband[c].sbandIdx)
{
case Subband.WT_ORIENT_LL:
// No need to project since all low-pass => nothing to do
break;
case Subband.WT_ORIENT_HL:
acb0x = 0;
break;
case Subband.WT_ORIENT_LH:
acb0y = 0;
break;
case Subband.WT_ORIENT_HH:
acb0x = 0;
acb0y = 0;
break;
default:
throw new System.ApplicationException("Internal JJ2000 error");
}
// Initialize output code-block
if (cblk == null)
{
if (intData)
{
cblk = new CBlkWTDataInt();
}
else
{
cblk = new CBlkWTDataFloat();
}
}
cbn = lastn[c];
cbm = lastm[c];
sb = currentSubband[c];
cblk.n = cbn;
cblk.m = cbm;
cblk.sb = sb;
// Calculate the indexes of first code-block in subband with respect
// to the partitioning origin, to then calculate the position and size
// NOTE: when calculating "floor()" by integer division the dividend
// and divisor must be positive, we ensure that by adding the divisor
// to the dividend and then substracting 1 to the result of the
// division
cn = (sb.ulcx - acb0x + sb.nomCBlkW) / sb.nomCBlkW - 1;
cm = (sb.ulcy - acb0y + sb.nomCBlkH) / sb.nomCBlkH - 1;
if (cbn == 0)
{
// Left-most code-block, starts where subband starts
cblk.ulx = sb.ulx;
}
else
{
// Calculate starting canvas coordinate and convert to subb. coords
cblk.ulx = (cn + cbn) * sb.nomCBlkW - (sb.ulcx - acb0x) + sb.ulx;
}
if (cbm == 0)
{
// Bottom-most code-block, starts where subband starts
cblk.uly = sb.uly;
}
else
{
cblk.uly = (cm + cbm) * sb.nomCBlkH - (sb.ulcy - acb0y) + sb.uly;
}
if (cbn < ncblks.x - 1)
{
// Calculate where next code-block starts => width
cblk.w = (cn + cbn + 1) * sb.nomCBlkW - (sb.ulcx - acb0x) + sb.ulx - cblk.ulx;
}
else
{
// Right-most code-block, ends where subband ends
cblk.w = sb.ulx + sb.w - cblk.ulx;
}
if (cbm < ncblks.y - 1)
{
// Calculate where next code-block starts => height
cblk.h = (cm + cbm + 1) * sb.nomCBlkH - (sb.ulcy - acb0y) + sb.uly - cblk.uly;
}
else
{
// Bottom-most code-block, ends where subband ends
cblk.h = sb.uly + sb.h - cblk.uly;
}
cblk.wmseScaling = 1f;
// Since we are in getNextInternCodeBlock() we can return a
// reference to the internal buffer, no need to copy. Just initialize
// the 'offset' and 'scanw'
cblk.offset = cblk.uly * decomposedComps[c].w + cblk.ulx;
cblk.scanw = decomposedComps[c].w;
// For the data just put a reference to our buffer
cblk.Data = decomposedComps[c].Data;
// Return code-block
return(cblk);
}
public abstract CSJ2K.j2k.wavelet.analysis.CBlkWTData getNextCodeBlock(int param1, CSJ2K.j2k.wavelet.analysis.CBlkWTData param2);