public bool OpenDeviceByLocation(uint LocationID)
{
if (USB_Interface.IsOpen)
{
USB_Interface.Close();
}
ExtLog.AddLine("Opening device");
var ftStatus = USB_Interface.OpenByLocation(LocationID);
if (ftStatus != FTDI.FT_STATUS.FT_OK)
{
ExtLog.AddLine("Failed to open device (error " + ftStatus + ")");
return(false);
}
ExtLog.AddLine("Setting default bauld rate (" + GlobalProperties.baudRate + ")");
ftStatus = USB_Interface.SetBaudRate(GlobalProperties.baudRate);
if (ftStatus != FTDI.FT_STATUS.FT_OK)
{
ExtLog.AddLine("Failed to set Baud rate (error " + ftStatus + ")");
return(false);
}
ExtLog.AddLine("Setting BitMode");
ftStatus = USB_Interface.SetBitMode(GlobalProperties.portDirectionMask, FTDI.FT_BIT_MODES.FT_BIT_MODE_SYNC_BITBANG);
if (ftStatus != FTDI.FT_STATUS.FT_OK)
{
ExtLog.AddLine("Failed to set BitMode (error " + ftStatus + ")");
return(false);
}
UpdateProgress(100, true);
return(true);
}
public bool MoveTo(float X, float Y)
{
var success = false;
var current_pos = CurrentLocation();
if (!MaxXswitch && !MinXswitch &&
!MaxYswitch && !MinYswitch)
{
var deltaX = X - current_pos.X;
var deltaY = Y - current_pos.Y;
if (OnMove != null)
{
OnMove(X, Y);
}
success = MoveBy((int)(deltaX * GlobalProperties.X_Scale), (int)(deltaY * GlobalProperties.Y_Scale));
if (OnMoveCompleted != null)
{
OnMoveCompleted();
}
}
else
{
ExtLog.AddLine("Limit switch warning must be cleared before moving.");
}
return(success);
}
private void RemoveDuplicates()
{
var dup = new bool[Shapes.Count];
for (var i = 0; i < Shapes.Count; i++)
{
if (!dup[i])
{
for (var j = 0; j < Shapes.Count; j++)
{
if ((i != j) && (!dup[j]))
{
var dist =
Math.Sqrt(Math.Pow(Shapes[i].x - Shapes[j].x, 2) + Math.Pow(Shapes[i].y - Shapes[j].y, 2));
dup[j] = (dist < NodeEpsilon);
}
}
}
}
for (var i = 0; i < Shapes.Count; i++)
{
Shapes[i].isDuplicate = dup[i];
}
Shapes.RemoveAll(d => d.isDuplicate);
ExtLog.AddLine(Shapes.Count + " Uniques");
}
private void removeZeros()
{
DrillNodes.RemoveAll(
dn => (Math.Sqrt(Math.Pow(dn.location.X, 2) + Math.Pow(dn.location.Y, 2)) < NodeEpsilon));
ExtLog.AddLine(DrillNodes.Count.ToString("D") + " Non-Zeros");
}
private void SeekShape(StreamReader reader)
{
while (!reader.EndOfStream)
{
var l = reader.ReadLine();
if (l != null)
{
if (l.StartsWith("<Shape ID="))
{
Shapes.Add(readUntilEndOfShape(reader));
}
if (l.StartsWith("<PageWidth Unit='IN'>"))
{
PageWidth = SafeFloatParse(TrimString(l, "<PageWidth Unit='IN'>", "</PageWidth>"), PageWidth);
}
if (l.StartsWith("<PageHeight Unit='IN'>"))
{
PageHeight = SafeFloatParse(TrimString(l, "<PageHeight Unit='IN'>", "</PageHeight>"), PageHeight);
}
//<PageWidth Unit='IN'>8.5</PageWidth>
//<PageHeight Unit='IN'>11</PageHeight>
}
}
ExtLog.AddLine(Shapes.Count.ToString("D") + " Shapes");
}
private void removeDuplicates()
{
var duplicates = new bool[DrillNodes.Count];
for (var i = 0; i < DrillNodes.Count; i++)
{
if (!duplicates[i])
{
for (var j = 0; j < DrillNodes.Count; j++)
{
if ((i != j) && (!duplicates[j]) && (sameLocation(DrillNodes[i], DrillNodes[j])))
{
duplicates[j] = true;
}
}
}
}
for (var i = duplicates.Length - 1; i >= 0; i--)
{
if (duplicates[i])
{
DrillNodes.RemoveAt(i);
}
}
ExtLog.AddLine(DrillNodes.Count.ToString("D") + " Uniques");
}
private void cancelTask()
{
if (asyncWorker.IsBusy)
{
ExtLog.AddLine("Cancelling Task...");
asyncWorker.CancelAsync();
}
}
private void RemoveZero()
{
for (var i = 0; i < Shapes.Count; i++)
{
Shapes[i].isZero = (Math.Abs(Shapes[i].x) < float.Epsilon) && (Math.Abs(Shapes[i].y) < float.Epsilon);
}
Shapes.RemoveAll(d => d.isZero);
ExtLog.AddLine(Shapes.Count + " Non-zeros");
}
public void asyncWorkerDoWork_DrillAll(object sender, DoWorkEventArgs e)
{
var nodes = e.Argument as List <DrillNode> ?? new List <DrillNode>();
var success = nodes.Count > 0;
if (success)
{
for (var i = 0; i < nodes.Count; i++)
{
if (!asyncWorker.CancellationPending)
{
if (success && USB.Check_Limit_Switches() && USB.TopSwitch && !USB.BottomSwitch)
{
if (nodes[i].status != DrillNode.DrillNodeStatus.Drilled)
{
UpdateNodes(i, DrillNode.DrillNodeStatus.Next);
ExtLog.AddLine("Moving to [" + (i + 1) + "/" + nodes.Count + "]: " + nodes[i].Location);
USB.MoveTo(nodes[i].location.X, nodes[i].location.Y);
ExtLog.AddLine("Drilling...");
//start drill from top
if (USB.IsOpen && USB.Check_Limit_Switches())
{
success = Initiate_Drill_From_Top(20, 50);
}
//wait for drill to reach back top
if (success && USB.IsOpen && USB.Check_Limit_Switches())
{
success = Wait_For_Drill_To_Top(20, 50);
}
UpdateNodes(i, DrillNode.DrillNodeStatus.Drilled);
asyncWorker.ReportProgress(100 * (i + 1) / nodes.Count, true);
}
else
{
ExtLog.AddLine("Node [" + (i + 1) + "/" + nodes.Count + "] already drilled");
}
}
else
{
success = false;
}
}
else
{
e.Cancel = true;
}
}
}
asyncWorker.ReportProgress(100);
e.Result = success;
}
private void asyncWorkerProgressChange(object sender, ProgressChangedEventArgs e)
{
var inhibit = e.UserState as bool? ?? false;
if (!inhibit)
{
ExtLog.AddLine("Progress: " + e.ProgressPercentage.ToString("D") + "%");
}
taskDialog.update(e.ProgressPercentage);
}
public static List <DrillNode> OptimizeNodesVScanLine(List <DrillNode> Nodes, PointF StartLocation)
{
if (Nodes.Count > 2)
{
ExtLog.AddLine("Optimizing node sequence (V-scanlines)");
var oldPathLength = getPathLength(Nodes, StartLocation);
var oldNodesCount = Nodes.Count;
var newXNodes = new List <DrillNode>(Nodes);
newXNodes.Sort(X_Sort_Ascending_Predicate);
var outputNodes = new List <DrillNode>();
var itteration = 0;
for (var i = 0; i < newXNodes.Count; i++)
{
var target_X = newXNodes[i].location.X;
var X_list = newXNodes.Where(n => Math.Abs(n.location.X - target_X) < OptimizationEpsilon).ToList();
if ((itteration % 2) == 0)
{
X_list.Sort(Y_Sort_Ascending_Predicate);
}
else
{
X_list.Sort(Y_Sort_Descending_Predicate);
}
outputNodes.AddRange(X_list);
i += X_list.Count - 1;
itteration++;
}
if (outputNodes.Count == oldNodesCount)
{
var X_Length = getPathLength(outputNodes, StartLocation);
if (X_Length < oldPathLength)
{
outputNodes.ForEach(ResetNodeStatus_Predicate);
ExtLog.AddLine("Path of " + X_Length.ToString("F4") + " / " + oldPathLength.ToString("F4"));
return(outputNodes);
}
ExtLog.AddLine("Optimize Failed (new path length is longer)");
}
else
{
ExtLog.AddLine("Optimize Failed (nodes count mismatch)");
}
}
else
{
ExtLog.AddLine("Not enough nodes to optimize path.");
}
return(Nodes);
}
private void DrillAllNodebutton_Click(object sender, EventArgs e)
{
if ((Nodes != null) && (Nodes.Count > 0))
{
TaskRunner.startAsyncWorkerWithTask("Drill All Nodes (Async)...",
TaskRunner.asyncWorkerDoWork_DrillAll, asyncWorkerDoWork_DrillAll_Cleanup, Nodes);
}
else
{
ExtLog.AddLine("No Nodes to Drill");
}
}
private void asyncWorkerDoWork_DrillSelected_Cleanup(bool success)
{
if (success)
{
ExtLog.AddLine("Task Completed");
Nodes[listBox1.SelectedIndex].status = DrillNode.DrillNodeStatus.Drilled;
UpdateNodeColors();
}
else
{
ExtLog.AddLine("Drill Sequence Failed");
}
}
private void asyncWorkerDoWork_FindAxisOrigin_Cleanup(bool success)
{
ExtLog.AddLine("Task Completed");
if (success)
{
var loc = USB.CurrentLocation();
ExtLog.AddLine("Location Set to Zero, Origin was found at X=" + loc.X.ToString("F3") + " Y=" + loc.Y.ToString("F3"));
zeroAllbutton_Click(this, null);
}
else
{
ExtLog.AddLine("Origin not found (out of reach / farther than 1 inch from expected location)");
}
}
private void ReadNodes(string filename)
{
Shapes = new List <rawShapeData>();
try
{
var f = File.OpenText(filename);
SeekShape(f);
f.Close();
}
catch (IOException ex)
{
ExtLog.AddLine(ex.Message);
DrillNodes.Clear();
}
}
private void AsyncDrillSelectedButton_Click(object sender, EventArgs e)
{
if ((listBox1.SelectedIndex > 0) && (listBox1.SelectedIndex <= Nodes.Count))
{
Nodes[listBox1.SelectedIndex].status = DrillNode.DrillNodeStatus.Next;
UpdateNodeColors();
var toDrill = Nodes[listBox1.SelectedIndex].location;
TaskRunner.startAsyncWorkerWithTask("Drill Selected Node (Async)...",
TaskRunner.asyncWorkerDoWork_DrillSelected, asyncWorkerDoWork_DrillSelected_Cleanup, toDrill);
}
else
{
ExtLog.AddLine("Invalid Selection");
}
}
public void startAsyncWorkerWithTask(string desc, DoWorkEventHandler asyncWork, CleanupDelegate asyncCleanup, object argument)
{
if (!asyncWorker.IsBusy)
{
if (USB.Check_Limit_Switches() && USB.IsOpen)
{
ExtLog.AddLine("Starting Async Task");
USB.Inhibit_LimitSwitches_Warning = true;
HostControl.Enabled = false;
try
{
ExtLog.AddLine(desc);
asyncWorker.DoWork += asyncWork;
lastTask = asyncWork;
CleanupCallback = asyncCleanup;
asyncWorker.RunWorkerAsync(argument);
}
catch (Exception ex)
{
ExtLog.AddLine("Async Task failed: " + ex.Message);
}
ExtLog.AddLine("Async Started");
if (taskDialog.ShowDialog(HostControl) == DialogResult.Abort)
{
cancelTask();
USB.CancelMove();
}
HostControl.Enabled = true;
USB.Inhibit_LimitSwitches_Warning = false;
}
else
{
ExtLog.AddLine("Can't init scripted sequence, limit switches are not properly set or USB interface is Closed");
}
}
else
{
ExtLog.AddLine("Async Task Already Running");
}
}
private void asyncWorkerComplete(object sender, RunWorkerCompletedEventArgs e)
{
asyncWorker.DoWork -= lastTask;
taskDialog.done();
if (e.Error != null)
{
ExtLog.AddLine("Error running Task: " + e.Error.Message);
}
else if (e.Cancelled)
{
ExtLog.AddLine("Task Cancelled");
}
else
{
var success = e.Result as bool? ?? false;
if (CleanupCallback != null)
{
CleanupCallback(success);
}
}
}
public List <string> GetDevicesList()
{
var result = new List <string>();
uint numUI = 0;
var ftStatus = USB_Interface.GetNumberOfDevices(ref numUI);
if (ftStatus == FTDI.FT_STATUS.FT_OK)
{
if (numUI > 0)
{
ExtLog.AddLine(numUI.ToString("D") + " Devices Found.");
var ftdiDeviceList = new FTDI.FT_DEVICE_INFO_NODE[numUI];
ftStatus = USB_Interface.GetDeviceList(ftdiDeviceList);
if (ftStatus == FTDI.FT_STATUS.FT_OK)
{
for (var i = 0; i < numUI; i++)
{
result.Add(ftdiDeviceList[i].LocId.ToString("D4") + ":" + ftdiDeviceList[i].Description);
}
}
else
{
ExtLog.AddLine("Failed to list devices (error " + ftStatus + ")");
}
}
else
{
ExtLog.AddLine("No devices found.");
}
}
else
{
ExtLog.AddLine("Failed to get number of devices (error " + ftStatus + ")");
}
return(result);
}
private void readCircles(string filename)
{
var svgReader = SvgDocument.Open(filename);
PageHeight = svgReader.Width.Value;
PageHeight = svgReader.Height.Value;
var circlesEnum = svgReader.Children.FindSvgElementsOf <SvgCircle>();
var circlesList = circlesEnum as IList <SvgCircle> ?? circlesEnum.ToList();
for (var i = 0; i < circlesList.Count; i++)
{
var pt = new[] { new PointF(circlesList[i].CenterX.Value, circlesList[i].CenterY.Value) };
applyParentsTransforms(pt, circlesList[i].Parent);
pt[0].X /= 72; //svgReader.Ppi;
pt[0].Y /= 72; //svgReader.Ppi;
DrillNodes.Add(new DrillNode(pt[0], i));
}
ExtLog.AddLine(DrillNodes.Count.ToString("D") + " Shapes");
}
private bool SendToUSB()
{
var result = true;
uint res = 0;
var ftStatus = USB_Interface.Write(OutputBuffer, dataSize, ref res);
if ((ftStatus != FTDI.FT_STATUS.FT_OK) && (res != dataSize))
{
USB_Interface.Close();
ExtLog.AddLine(string.Format("Failed to write data (error {0}) ({1}/{2})", ftStatus, res, dataSize));
result = false;
}
else
{
ftStatus = USB_Interface.Read(InputBuffer, (uint)dataSize, ref res);
if ((ftStatus != FTDI.FT_STATUS.FT_OK) && (res != dataSize))
{
USB_Interface.Close();
ExtLog.AddLine(string.Format("Failed to write data (error {0}) ({1}/{2})", ftStatus, res, dataSize));
result = false;
}
}
return(result);
}
public static List <DrillNode> OptimizeNodesNN(List <DrillNode> Nodes, PointF StartLocation)
{
if (Nodes.Count > 2)
{
ExtLog.AddLine("Optimizing node sequence (nearest neighbor)");
var oldPathLength = getPathLength(Nodes, StartLocation);
var oldNodesCount = Nodes.Count;
var nodes = new List <DrillNode>(Nodes);
var CurrentPosition = StartLocation;
var newNodes = new List <DrillNode>();
var dists = GetNodeDistances(nodes, CurrentPosition);
var Closest = 0;
for (var i = 0; i < dists.Length; i++)
{
if (dists[i] < dists[Closest])
{
Closest = i;
}
}
newNodes.Add(nodes[Closest]);
nodes.Remove(nodes[Closest]);
for (var j = 0; j < oldNodesCount - 1; j++)
{
CurrentPosition = newNodes[newNodes.Count - 1].location;
dists = GetNodeDistances(nodes, CurrentPosition);
Closest = 0;
for (var i = 0; i < dists.Length; i++)
{
if (dists[i] < dists[Closest])
{
Closest = i;
}
}
newNodes.Add(nodes[Closest]);
nodes.Remove(nodes[Closest]);
}
var newPathLength = getPathLength(newNodes, StartLocation);
var newNodesCount = newNodes.Count;
if (newPathLength <= oldPathLength)
{
if (newNodesCount == oldNodesCount)
{
newNodes.ForEach(ResetNodeStatus_Predicate);
ExtLog.AddLine("Path of " + newPathLength.ToString("F4") + " / " + oldPathLength.ToString("F4"));
return(newNodes);
}
ExtLog.AddLine("Optimize Failed (nodes count mismatch)");
}
else
{
ExtLog.AddLine("Optimize Failed (new path length is longer)");
}
}
else
{
ExtLog.AddLine("Not enough nodes to optimize path.");
}
return(Nodes);
}
private void asyncWorkerDoWork_DrillAll_Cleanup(bool success)
{
ExtLog.AddLine(success ? "Task Completed" : "Drill Sequence Failed");
}
public bool MoveBy(int byX, int byY)
{
cancelJob = false;
var success = true;
var abyX = Math.Abs(byX);
var abyY = Math.Abs(byY);
//process directions
var XStepDirection = (byX == 0) ? 0 : byX / abyX;
var YStepDirection = (byY == 0) ? 0 : byY / abyY;
//process backlash
X_Last_Direction = XStepDirection;
Y_Last_Direction = YStepDirection;
//process moves
var numMoves = (abyX >= abyY) ? abyX : abyY;
var stridex = 1.0f; //default maximum stride
var stridey = 1.0f;
if ((abyX != 0) || (abyY != 0)) //adjust stride
{
if (abyX > abyY)
{
stridey = (float)abyY / abyX;
}
else if (abyY > abyX)
{
stridex = (float)abyX / abyY;
}
}
var fractx = 0.0f;
var fracty = 0.0f;
for (var i = 0; i < numMoves; i++)
{
fractx += stridex;
fracty += stridey;
if (fractx >= 0.5f)
{
X_Abs_Location += XStepDirection;
fractx -= 1.0f;
}
if (fracty >= 0.5f)
{
Y_Abs_Location += YStepDirection;
fracty -= 1.0f;
}
Transfer();
UpdateProgress(100 * i / numMoves, false);
if (!Check_Limit_Switches())
{
if (!Inhibit_LimitSwitches_Warning)
{
ExtLog.AddLine("Limit switch triggered before end of move");
}
i = numMoves; //exit loop
success = false;
}
if (jobCancelled())
{
ExtLog.AddLine("Move Cancelled");
i = numMoves; //exit loop
success = false;
}
}
UpdateProgress(100, true);
return(success);
}
private void LoadFileButton_Click(object sender, EventArgs e)
{
if (openFileDialog1.ShowDialog() == DialogResult.OK)
{
if (dtypeDialog.ShowDialog() == DialogResult.OK)
{
if (File.Exists(openFileDialog1.FileName))
{
ExtLog.AddLine("Opening File: " + openFileDialog1.FileName);
var loader = (INodeLoader)null;
if (openFileDialog1.FileName.ToUpperInvariant().EndsWith(".VDX"))
{
loader = new VDXLoader();
}
else if (openFileDialog1.FileName.ToUpperInvariant().EndsWith(".SVG"))
{
loader = new SVGLoader();
}
else
{
ExtLog.AddLine("File Type not supported.");
}
if (loader != null)
{
loader.PageWidth = 11.0f;
loader.PageHeight = 11.0f;
loader.DrillNodes = new List <DrillNode>();
var dresult = dtypeDialog.DrawingConfig;
loader.Load(openFileDialog1.FileName, dresult);
Nodes = loader.DrillNodes;
if (dresult.reset_origin)
{
var leftmost = loader.PageWidth;
var topmost = loader.PageHeight;
for (var i = 0; i < Nodes.Count; i++)
{
if (Nodes[i].location.X < leftmost)
{
leftmost = Nodes[i].location.X;
}
if (Nodes[i].location.Y < topmost)
{
topmost = Nodes[i].location.Y;
}
}
XoriginTextbox.Text = (leftmost - dresult.origin_x).ToString("F4");
YoriginTextbox.Text = (topmost - dresult.origin_y).ToString("F4");
OffsetOriginBtton_Click(sender, e);
}
ExtLog.AddLine(Nodes.Count.ToString("D") + " Nodes loaded.");
ExtLog.AddLine("Page Width: " + loader.PageWidth.ToString("F1"));
ExtLog.AddLine("Page Height: " + loader.PageHeight.ToString("F1"));
drawingPageBox = new Box(0, 0, loader.PageWidth, loader.PageHeight, Color.GhostWhite);
lastSelectedStatus = DrillNode.DrillNodeStatus.Idle;
RebuildListBoxAndViewerFromNodes();
lastSelectedIndex = -1;
}
}
}
}
}
public bool MoveBy(int byX, int byY)
{
cancelJob = false;
var success = true;
var abyX = Math.Abs(byX);
var abyY = Math.Abs(byY);
//process directions
var XStepDirection = (byX == 0) ? 0 : byX / abyX;
var YStepDirection = (byY == 0) ? 0 : byY / abyY;
//process backlash
if (!Inhibit_Backlash_Compensation)
{
if ((XStepDirection != 0) && (XStepDirection != X_Last_Direction))
{
abyX += GlobalProperties.X_Backlash;
X_Delta += GlobalProperties.X_Backlash * XStepDirection;
X_Last_Direction = XStepDirection;
}
if ((YStepDirection != 0) && (YStepDirection != Y_Last_Direction))
{
abyY += GlobalProperties.Y_Backlash;
Y_Delta += GlobalProperties.Y_Backlash * YStepDirection;
Y_Last_Direction = YStepDirection;
}
}
else
{
X_Last_Direction = XStepDirection;
Y_Last_Direction = YStepDirection;
}
//Enable TQA Driver if requested
TQA_Driver_Bit = TQA_Driver_Enable;
Transfer();
//process moves
var numMoves = (abyX >= abyY) ? abyX : abyY;
var stridex = 1.0f; //default maximum stride
var stridey = 1.0f;
if ((abyX != 0) || (abyY != 0)) //adjust stride
{
if (abyX > abyY)
{
stridey = (float)abyY / abyX;
}
else if (abyY > abyX)
{
stridex = (float)abyX / abyY;
}
}
var fractx = 0.0f;
var fracty = 0.0f;
for (var i = 0; i < numMoves; i++)
{
fractx += stridex;
fracty += stridey;
if (fractx >= 0.5f)
{
X_Abs_Location += XStepDirection;
fractx -= 1.0f;
}
if (fracty >= 0.5f)
{
Y_Abs_Location += YStepDirection;
fracty -= 1.0f;
}
Transfer();
UpdateProgress(100 * i / numMoves, false);
if (!Check_Limit_Switches())
{
if (!Inhibit_LimitSwitches_Warning)
{
ExtLog.AddLine("Limit switch triggered before end of move");
}
i = numMoves; //exit loop
success = false;
}
if (jobCancelled())
{
ExtLog.AddLine("Move Cancelled");
i = numMoves; //exit loop
success = false;
}
}
UpdateProgress(100, true);
TQA_Driver_Bit = false; //Disable TQA Driver
Transfer();
return(success);
}
private void RemoveNonEllipses()
{
Shapes.RemoveAll(d => !d.isEllipse);
ExtLog.AddLine(Shapes.Count + " Ellipses");
}