// Calculate manages calculations that need to be run for each time step
public void Calculate
(
double PanelTilt // The angle between the surface tilt of the module and the ground [radians]
, double Clearance // Array ground clearance [m]
, double HDif // Diffuse horizontal irradiance [W/m2]
, double TDifRef // Front reflected diffuse irradiance [W/m2]
, double HGlo // Horizontal global irradiance [W/m2]
, double[] frontGroundGHI // Global irradiance for each of the ground segments to front of the row [W/m2]
, double[] rearGroundGHI // Global irradiance for each of the ground segments to rear of the row [W/m2]
, double aveGroundGHI // Average global irradiance on ground segment to the rear of row [W/m2]
, int month // Current month, used for getting albedo value [#]
, double backSH // Fraction of the back surface of the PV array that is unshaded [#]
, double TDir // Back tilted beam irradiance [W/m2]
, DateTime ts // Time stamp analyzed, used for printing .csv files
)
{
// For tracking systems, panel tilt and ground clearance will change at each time step
itsPanelTilt = PanelTilt;
itsClearance = Clearance / itsArrayBW; // Convert to panel slope lengths
int numGroundSegs = Util.NUM_GROUND_SEGS;
double h = Math.Sin(itsPanelTilt); // Vertical height of sloped PV panel [panel slope lengths]
double b = Math.Cos(itsPanelTilt); // Horizontal distance from front of panel to back of panel [panel slope lengths]
// Calculate x, y coordinates of bottom and top edges of PV row behind the current PV row so that portions of sky and ground viewed by
// the PV cell may be determined. Coordinates are relative to (0,0) being the ground point below the lower front edge of current PV row.
// The row behind the current row is in the positive x direction.
double bottomX = itsPitch; // x value for point on bottom edge of PV panel behind current row
double bottomY = itsClearance; // y value for point on bottom edge of PV panel behind current row
double topX = bottomX + b; // x value for point on top edge of PV panel behind current row
double topY = bottomY + h; // y value for point on top edge of PV panel behind current row
// Get albedo value for the month
Albedo = itsMonthlyAlbedo[month];
// Accumulate diffuse, reflected, and beam irradiance components for each cell row over its field of view of PI radians
for (int i = 0; i < numCellRows; i++)
{
double cellX = b * (i + 0.5) / numCellRows; // x value for location of cell
double cellY = itsClearance + h * (i + 0.5) / numCellRows; // y value for location of cell
double elevUp = 0.0; // Elevation angle from PV cell to top of PV panel
double elevDown = 0.0; // Elevation angle from PV cell to bottom of PV panel
if (itsRowType == RowType.INTERIOR)
{
elevUp = Math.Atan((topY - cellY) / (topX - cellX));
elevDown = Math.Atan((cellY - bottomY) / (bottomX - cellX));
}
int stopSky = Convert.ToInt32((itsPanelTilt - elevUp) * Util.RTOD); // Last whole degree in arc range that sees sky; first is 0 [degrees]
int startGround = Convert.ToInt32((itsPanelTilt + elevDown) * Util.RTOD); // First whole degree in arc range that sees ground; last is 180 [degrees]
// Compute sky diffuse component
backDif[i] = RadiationProc.GetViewFactor(0, stopSky * Util.DTOR) * HDif;
// Compute front surface reflected component
if (itsRowType == RowType.INTERIOR)
{
backFroRef[i] = RadiationProc.GetViewFactor(stopSky * Util.DTOR, startGround * Util.DTOR) * TDifRef;
}
backGroRef[i] = 0;
// Add ground reflected component
for (int j = startGround; j < 180; j++)
{
// Get start and ending elevations for this (j, j + 1) pair
double startElevDown = elevDown + (j - startGround) * Util.DTOR;
double stopElevDown = elevDown + (j + 1 - startGround) * Util.DTOR;
// Projection onto ground in positive x direction
double projX2 = cellX + cellY / Math.Tan(startElevDown);
double projX1 = cellX + cellY / Math.Tan(stopElevDown);
// Initialize and get actualGroundGHI value
double actualGroundGHI = 0;
if (Math.Abs(projX1 - projX2) > 0.99 * itsPitch)
{
if (itsRowType == RowType.SINGLE)
{
// Use measured GHI if projection approximates or exceeds the pitch
actualGroundGHI = HGlo;
}
else
{
// Use average GHI if projection approximates or exceeds the pitch
actualGroundGHI = aveGroundGHI;
}
}
else
{
// Normalize projections and multiply by n
projX1 = numGroundSegs * projX1 / itsPitch;
projX2 = numGroundSegs * projX2 / itsPitch;
if (itsRowType == RowType.SINGLE && ((Math.Abs(projX1) > numGroundSegs - 1) || (Math.Abs(projX2) > numGroundSegs - 1)))
{
// Use measured GHI if projection exceeds the pitch
actualGroundGHI = HGlo;
}
else
{
while (projX1 < -numGroundSegs || projX2 < -numGroundSegs)
{
projX1 += numGroundSegs;
projX2 += numGroundSegs;
}
while (projX1 >= numGroundSegs || projX2 >= numGroundSegs)
{
projX1 -= numGroundSegs;
projX2 -= numGroundSegs;
}
// Determine indices (truncate values) for use with groundGHI arrays
int index1 = Convert.ToInt32(Math.Floor(projX1 + numGroundSegs) - numGroundSegs);
int index2 = Convert.ToInt32(Math.Floor(projX2 + numGroundSegs) - numGroundSegs);
if (index1 == index2)
{
// Use single value if projection falls within a single segment of ground
if (index1 < 0)
{
actualGroundGHI = frontGroundGHI[index1 + numGroundSegs];
}
else
{
actualGroundGHI = rearGroundGHI[index1];
}
}
else
{
// Sum the irradiances on the ground if the projection falls across multiple segments
for (int k = index1; k <= index2; k++)
{
if (k == index1)
{
if (k < 0)
{
actualGroundGHI += frontGroundGHI[k + numGroundSegs] * (k + 1.0 - projX1);
}
else
{
actualGroundGHI += rearGroundGHI[k] * (k + 1.0 - projX1);
}
}
else if (k == index2)
{
if (k < 0)
{
actualGroundGHI += frontGroundGHI[k + numGroundSegs] * (projX2 - k);
}
else
{
actualGroundGHI += rearGroundGHI[k] * (projX2 - k);
}
}
else
{
if (k < 0)
{
actualGroundGHI += frontGroundGHI[k + numGroundSegs];
}
else
{
actualGroundGHI += rearGroundGHI[k];
}
}
}
// Get irradiance on ground in the 1 degree field of view
actualGroundGHI /= projX2 - projX1;
}
}
}
backGroRef[i] += RadiationProc.GetViewFactor(j * Util.DTOR, (j + 1) * Util.DTOR) * actualGroundGHI * Albedo;
}
double cellShade = 0.0;
if (itsRowType == RowType.INTERIOR)
{
// Cell is fully shaded if >= 1, fully unshaded if <= 0, otherwise fractionally shaded
cellShade = (1.0 - backSH) * numCellRows - i;
cellShade = Math.Min(cellShade, 1.0);
cellShade = Math.Max(cellShade, 0.0);
}
// Compute beam component, corrected for back shading
backDir[i] = TDir * (1.0 - cellShade);
// Correct each component for AOI and structure shading losses
backDif[i] = backDif[i] * IAMDif * (1.0 - structLossFactor);
backFroRef[i] = backFroRef[i] * IAMRef * (1.0 - structLossFactor);
backGroRef[i] = backGroRef[i] * IAMRef * (1.0 - structLossFactor);
backDir[i] = backDir[i] * IAMDir * (1.0 - structLossFactor);
// Sum all components to get global back irradiance
backGlo[i] = backDif[i] + backFroRef[i] + backGroRef[i] + backDir[i];
}
BDif = 0;
BFroRef = 0;
BGroRef = 0;
BDir = 0;
double maxGlo = backGlo[0];
double minGlo = backGlo[0];
for (int i = 0; i < numCellRows; i++)
{
// Calculate mean irradiance components
BDif += backDif[i] / numCellRows;
BFroRef += backFroRef[i] / numCellRows;
BGroRef += backGroRef[i] / numCellRows;
BDir += backDir[i] / numCellRows;
// Find the max and min global irradiance values
maxGlo = Math.Max(maxGlo, backGlo[i]);
minGlo = Math.Min(minGlo, backGlo[i]);
}
BGlo = BDif + BFroRef + BGroRef + BDir;
// Calculate the homogeneity of values as the range normalized by the sum
IrrInhomogeneity = (BGlo > 0) ? (maxGlo - minGlo) / BGlo : 0;
// Option to print details of the model in .csv files. Only recommended for single day simulations.
// PrintModel(ts);
}
double farmACMinVoltageLoss = 0; // Loss of power when voltage of the array is too small and forces the inverters to 'shut off' and when inverter is not operating at MPP [W]
// Calculate method
public void Calculate(
RadiationProc RadProc, // Radiation related data
SimMeteo SimMet // Meteological data from inputfile
)
{
// Reset Losses
for (int i = 0; i < SimPVA.Length; i++)
{
SimInv[i].LossPMinThreshold = 0;
SimInv[i].LossClipping = 0;
SimInv[i].LossLowVoltage = 0;
SimInv[i].LossHighVoltage = 0;
}
// Calculating solar panel shading
SimShading.Calculate(RadProc.SimSun.Zenith, RadProc.SimSun.Azimuth, RadProc.SimHorizonShading.TDir, RadProc.SimHorizonShading.TDif, RadProc.SimHorizonShading.TRef, RadProc.SimTracker.SurfSlope, RadProc.SimTracker.SurfAzimuth);
// Calculating spectral model effects
SimSpectral.Calculate(SimMet.HGlo, RadProc.SimSun.NExtra, RadProc.SimSun.Zenith);
try
{
// Calculate PV Array Output for inputs read in this loop
for (int j = 0; j < ReadFarmSettings.SubArrayCount; j++)
{
// Adjust the IV Curve based on based on Temperature and Irradiance
SimPVA[j].CalcIVCurveParameters(SimMet.TGlo, SimShading.ShadTDir, SimShading.ShadTDif, SimShading.ShadTRef, RadProc.SimTilter.IncidenceAngle, SimMet.TAmbient, SimMet.WindSpeed, SimMet.TModMeasured, SimMet.MonthOfYear, SimSpectral.clearnessCorrection);
// Check Inverter status to determine if the Inverter is ON or OFF
GetInverterStatus(j);
// If inverter is off set appropriate variables to 0 and recalculate array in open circuit voltage
if (!SimInv[j].isON)
{
SimInv[j].ACPwrOut = 0;
SimInv[j].IOut = 0;
SimPVA[j].CalcAtOpenCircuit();
SimPVA[j].Calculate(false, SimPVA[j].Voc);
}
//performing AC wiring calculations
SimACWiring[j].Calculate(SimInv[j]);
// Assigning the outputs to the dictionary
ReadFarmSettings.Outputlist["SubArray_Current" + (j + 1).ToString()] = SimPVA[j].IOut;
ReadFarmSettings.Outputlist["SubArray_Voltage" + (j + 1).ToString()] = SimPVA[j].VOut;
ReadFarmSettings.Outputlist["SubArray_Power" + (j + 1).ToString()] = SimPVA[j].POut / 1000;
ReadFarmSettings.Outputlist["SubArray_Current_Inv" + (j + 1).ToString()] = SimInv[j].IOut;
ReadFarmSettings.Outputlist["SubArray_Voltage_Inv" + (j + 1).ToString()] = SimInv[j].itsOutputVoltage;
ReadFarmSettings.Outputlist["SubArray_Power_Inv" + (j + 1).ToString()] = SimInv[j].ACPwrOut / 1000;
}
//Calculating total farm output and total ohmic loss
farmACOutput = 0;
farmACOhmicLoss = 0;
for (int i = 0; i < SimInv.Length; i++)
{
farmACOutput += SimInv[i].ACPwrOut;
farmACOhmicLoss += SimACWiring[i].ACWiringLoss;
}
SimTransformer.Calculate(farmACOutput - farmACOhmicLoss);
// Calculating outputs that will be assigned for this interval
// Shading each component of the Tilted radiaton
// Using horizon affected tilted radiation
ShadGloLoss = (RadProc.SimTilter.TGlo - SimShading.ShadTGlo) - RadProc.SimHorizonShading.LossGlo;
ShadGloFactor = (RadProc.SimTilter.TGlo > 0 ? SimShading.ShadTGlo / RadProc.SimTilter.TGlo : 1);
ShadBeamLoss = RadProc.SimHorizonShading.TDir - SimShading.ShadTDir;
ShadDiffLoss = RadProc.SimTilter.TDif > 0 ? RadProc.SimHorizonShading.TDif - SimShading.ShadTDif : 0;
ShadRefLoss = RadProc.SimTilter.TRef > 0 ? RadProc.SimHorizonShading.TRef - SimShading.ShadTRef : 0;
//Calculating total farm level variables. Cleaning them so they are non-cumulative.
farmDC = 0;
farmDCCurrent = 0;
farmDCMismatchLoss = 0;
farmDCModuleQualityLoss = 0;
farmDCOhmicLoss = 0;
farmDCSoilingLoss = 0;
farmDCTemp = 0;
farmTotalModules = 0;
farmPNomDC = 0;
farmPNomAC = 0;
farmACPMinThreshLoss = 0;
farmACClippingPower = 0;
farmACMaxVoltageLoss = 0;
farmACMinVoltageLoss = 0;
farmPnom = 0;
farmTempLoss = 0;
farmRadLoss = 0;
for (int i = 0; i < SimPVA.Length; i++)
{
farmDC += SimPVA[i].POut;
farmDCCurrent += SimPVA[i].IOut;
farmDCMismatchLoss += Math.Max(0, SimPVA[i].MismatchLoss);
farmDCModuleQualityLoss += SimPVA[i].ModuleQualityLoss;
farmDCOhmicLoss += SimPVA[i].OhmicLosses;
farmDCSoilingLoss += SimPVA[i].SoilingLoss;
farmDCTemp += SimPVA[i].TModule * SimPVA[i].itsNumModules;
farmTotalModules += SimPVA[i].itsNumModules;
farmPNomDC += SimPVA[i].itsPNomDCArray;
farmPNomAC += SimInv[i].itsPNomArrayAC;
farmACPMinThreshLoss += SimInv[i].LossPMinThreshold;
farmACClippingPower += SimInv[i].LossClipping;
farmACMaxVoltageLoss += SimInv[i].LossHighVoltage;
farmACMinVoltageLoss += SimInv[i].LossLowVoltage;
farmPnom += (SimPVA[i].itsPNom * SimPVA[i].itsNumModules) * SimPVA[i].TGloEff / 1000;
farmTempLoss += SimPVA[i].tempLoss;
farmRadLoss += SimPVA[i].radLoss;
}
// Averages all PV Array temperature values
farmDCTemp /= farmTotalModules;
farmModuleTempAndAmbientTempDiff = farmDCTemp - SimMet.TAmbient;
farmDCEfficiency = (RadProc.SimTilter.TGlo > 0 ? farmDC / (RadProc.SimTilter.TGlo * farmArea) : 0) * 100;
farmPNomDC = Utilities.ConvertWtokW(farmPNomDC);
farmPNomAC = Utilities.ConvertWtokW(farmPNomAC);
farmOverAllEff = (RadProc.SimTilter.TGlo > 0 && SimTransformer.POut > 0 ? SimTransformer.POut / (RadProc.SimTilter.TGlo * farmArea) : 0) * 100;
farmPR = RadProc.SimTilter.TGlo > 0 && farmPNomDC > 0 && SimTransformer.POut > 0 ? SimTransformer.POut / RadProc.SimTilter.TGlo / farmPNomDC : 0;
farmSysIER = (SimTransformer.itsPNom - SimTransformer.POut) / (RadProc.SimTilter.TGlo * 1000);
}
catch (Exception ce)
{
ErrorLogger.Log(ce, ErrLevel.FATAL);
}
// Assigning Outputs for this class.
AssignOutputs();
}
// Method to start the simulation software run.
public void Simulate(XmlDocument SiteSettings, String _Input = null, String _Output = null)
{
// Adding timer to calculate elapsed time for the simulation.
Stopwatch timeTaken = new Stopwatch();
timeTaken.Start();
// Delete error log just before simulation
if (File.Exists(Application.StartupPath + "/ErrorLog.txt"))
{
File.Delete(Application.StartupPath + "/ErrorLog.txt");
}
// ReadFarmSettings reads the overall configuration of the farm
ReadFarmSettings.doc = SiteSettings;
// Obtain IO File names, either from the command prompt, or from .CSYX
if ((_Input == null) && (_Output == null))
{
ReadFarmSettings.AssignIOFileNames();
}
else
{
ReadFarmSettings.SimInputFile = _Input;
ReadFarmSettings.SimOutputFile = _Output;
}
// Collecting input and output file locations and Input/Output file location
ReadFarmSettings.GetSimulationMode();
// Inform user about site configuration:
Console.WriteLine("Status: Configuring parameters");
// Creating the SimMeteo Object to process the input file, and streamWriter to Write to the Output File
try
{
// Reading and assigning the input file schema before configuring the inputs
ReadFarmSettings.AssignInputFileSchema();
// Instantiating the relevant simulation class based on the simulation mode
switch (ReadFarmSettings.SystemMode)
{
case "ASTME2848Regression":
SimASTM = new ASTME2848();
SimASTM.Config();
break;
case "GridConnected":
// Assign the Sub-Array Count for grid connected systems.
ReadFarmSettings.AssignSubArrayCount();
SimGridSys = new GridConnectedSystem();
SimGridSys.Config();
goto case "Radiation";
case "Radiation":
SimRadProc = new RadiationProc();
SimRadProc.Config();
break;
default:
ErrorLogger.Log("Invalid Simulation mode found. CASSYS will exit.", ErrLevel.FATAL);
break;
}
// Reading and assigning the input file schema and the output file schema
ReadFarmSettings.AssignOutputFileSchema();
// Notifying user of the Configuration status
if (ErrorLogger.numWarnings == 0)
{
Console.WriteLine("Status: Configuration OK.");
}
else
{
Console.WriteLine("Status: There were problems encountered during configuration.");
Console.WriteLine(" Please see the error log file for details.");
Console.WriteLine(" CASSYS has configured parameters with default values.");
}
try
{
// Read through the input file and perform calculations
Console.Write("Status: Simulation Running");
// Creating the input file parser
SimMeteo SimMeteoParser = new SimMeteo();
SimMeteoParser.Config();
// Create StreamWriter
if (ReadFarmSettings.outputMode == "str")
{
// Assigning Headers to output String
OutputString = ReadFarmSettings.OutputHeader.TrimEnd(',') + '\n';
}
// Create StreamWriter and write output to .csv file
else if (ReadFarmSettings.outputMode == "csv")
{
// If in batch mode, use the appending overload of StreamWriter
if ((File.Exists(ReadFarmSettings.SimOutputFile)) && (ReadFarmSettings.batchMode))
{
OutputFileWriter = new StreamWriter(ReadFarmSettings.SimOutputFile, true);
}
else
{
// Writing the headers to the new output file.
OutputFileWriter = new StreamWriter(ReadFarmSettings.SimOutputFile);
// Writing the headers to the new output file.
OutputFileWriter.WriteLine(ReadFarmSettings.OutputHeader);
}
}
// The following is executed if using iterative mode
else
{
// Row for output header created only during first simulation run
if (ReadFarmSettings.runNumber == 1)
{
ReadFarmSettings.outputTable.Rows.InsertAt(ReadFarmSettings.outputTable.NewRow(), 0);
}
// Placing output header in data table
ReadFarmSettings.outputTable.Rows[0][ReadFarmSettings.runNumber - 1] = ReadFarmSettings.OutputHeader.TrimEnd(',');
}
// Read through the Input File and perform the relevant simulation
while (!SimMeteoParser.InputFileReader.EndOfData)
{
SimMeteoParser.Calculate();
// If input file line could not be read, go to next line
if (!SimMeteoParser.inputRead)
{
continue;
}
// running required calculations based on simulation mode
switch (ReadFarmSettings.SystemMode)
{
case "ASTME2848Regression":
SimASTM.Calculate(SimMeteoParser);
break;
case "GridConnected":
SimRadProc.Calculate(SimMeteoParser);
SimGridSys.Calculate(SimRadProc, SimMeteoParser);
LossDiagram.Calculate();
break;
case "Radiation":
SimRadProc.Calculate(SimMeteoParser);
break;
default:
ErrorLogger.Log("Invalid Simulation mode found. CASSYS will exit.", ErrLevel.FATAL);
break;
}
// Only create output string in DLL mode, as creating string causes significant lag
if (ReadFarmSettings.outputMode == "str")
{
OutputString += String.Join(",", GetOutputLine()) + "\n";
}
// Write to output file
else if (ReadFarmSettings.outputMode == "csv")
{
try
{
// Assembling and writing the line containing all output values
OutputFileWriter.WriteLine(String.Join(",", GetOutputLine()));
}
catch (IOException ex)
{
ErrorLogger.Log(ex, ErrLevel.WARNING);
}
}
// Using Iterative Mode: Writes output to a datatable
else
{
// Create row if this is the first simulation run
if (ReadFarmSettings.runNumber == 1)
{
ReadFarmSettings.outputTable.Rows.InsertAt(ReadFarmSettings.outputTable.NewRow(), ReadFarmSettings.outputTable.Rows.Count);
}
// Write output values to data table
ReadFarmSettings.outputTable.Rows[ErrorLogger.iterationCount][ReadFarmSettings.runNumber - 1] = String.Join(",", GetOutputLine());
}
}
if (ReadFarmSettings.outputMode == "str")
{
// Trim newline character from the end of output
OutputString = OutputString.TrimEnd('\r', '\n');
}
// Write output to .csv file
else if (ReadFarmSettings.outputMode == "csv")
{
try
{
// Clean out the buffer of the writer to ensure all entries are written to the output file.
OutputFileWriter.Flush();
OutputFileWriter.Dispose();
SimMeteoParser.InputFileReader.Dispose();
}
catch (IOException ex)
{
ErrorLogger.Log(ex, ErrLevel.WARNING);
}
}
// If simulation done for Grid connected mode then write the calculated loss values to temp output file
if (ReadFarmSettings.SystemMode == "GridConnected")
{
LossDiagram.AssignLossOutputs();
}
timeTaken.Stop();
Console.WriteLine("");
Console.WriteLine("Status: Complete. Simulation took " + timeTaken.ElapsedMilliseconds / 1000D + " seconds.");
}
catch (IOException)
{
ErrorLogger.Log("The output file name " + ReadFarmSettings.SimOutputFile + " is not accesible or is not available at the location provided.", ErrLevel.FATAL);
}
}
catch (Exception ex)
{
ErrorLogger.Log("CASSYS encountered an unexpected error: " + ex.Message, ErrLevel.FATAL);
}
}
double CalcSkyViewDirection
(
double x // Horizontal dimension in the row-to-row ground area
, RowType rowType // The position of the row being calculated relative to others [unitless]
, double direction // The direction in which to move along the x-axis [-1, 0, 1]
)
{
double h = Math.Sin(itsPanelTilt); // Vertical height of sloped PV panel [panel slope lengths]
double b = Math.Cos(itsPanelTilt); // Horizontal distance from front of panel to back of panel [panel slope lengths]
double offset = direction; // Initialize offset to begin at first unit of given direction
double skyPatch = 0; // View factor for view of sky in single row-to-row area
double skySum = 0; // View factor for all sky views in given direction
double angA = 0;
double angB = 0;
double angC = 0;
double angD = 0;
double beta1 = 0; // Start of ground's field of view that sees the sky segment
double beta2 = 0; // End of ground's field of view that sees the sky segment
// Sum sky view factors until sky view factor contributes <= 1% of sum
// Only loop the calculation for rows extending forward or backward, so break loop when direction = 0.
do
{
// Set back limiting angle to 0 since there is no row behind.
if (rowType == RowType.LAST)
{
beta1 = 0;
}
else
{
// Angle from ground point to top of panel P
angA = Math.Atan2(h + itsClearance, (offset + 1) * itsPitch + b - x);
// Angle from ground point to bottom of panel P
angB = Math.Atan2(itsClearance, (offset + 1) * itsPitch - x);
beta1 = Math.Max(angA, angB);
}
// Set front limiting angle to PI since there is no row ahead.
if (rowType == RowType.FIRST)
{
beta2 = Math.PI;
}
else
{
// Angle from ground point to top of panel Q
angC = Math.Atan2(h + itsClearance, offset * itsPitch + b - x);
// Angle from ground point to bottom of panel Q
angD = Math.Atan2(itsClearance, offset * itsPitch - x);
beta2 = Math.Min(angC, angD);
}
// If there is an opening in the sky through which the sun is seen, calculate view factor of sky patch
skyPatch = (beta2 > beta1) ? RadiationProc.GetViewFactor(beta1, beta2) : 0;
skySum += skyPatch;
offset += direction;
} while (offset != 0 && skyPatch > (0.01 * skySum));
return(skySum);
}
double YearsSinceStart; // Number of entire years since the beginning of the simulation
// Calculate method
public void Calculate
(
RadiationProc RadProc, // Radiation related data
SimMeteo SimMet // Meteological data from inputfile
)
{
// Record number of years since start of simulation
// This is used to calculate module ageing
// Update StartTimeStamp if it has never been initialized
if (StartTimeStamp == new DateTime())
{
StartTimeStamp = RadProc.TimeStampAnalyzed;
}
TimeSpan SimDelta = RadProc.TimeStampAnalyzed.Subtract(StartTimeStamp);
YearsSinceStart = Math.Floor(SimDelta.Days / 365.25);
// Reset Losses
for (int i = 0; i < SimPVA.Length; i++)
{
SimInv[i].LossPMinThreshold = 0;
SimInv[i].LossClipping = 0;
SimInv[i].LossLowVoltage = 0;
SimInv[i].LossHighVoltage = 0;
}
// Calculating solar panel shading
SimShading.Calculate(RadProc.SimSun.Zenith, RadProc.SimSun.Azimuth, RadProc.SimHorizonShading.TDir, RadProc.SimHorizonShading.TDif, RadProc.SimHorizonShading.TRef, RadProc.SimTracker.SurfSlope, RadProc.SimTracker.SurfAzimuth);
if (RadProc.SimTracker.useBifacial)
{
// Calculating shading of ground beneath solar panels
SimGround.Calculate(RadProc.SimSun.Zenith, RadProc.SimSun.Azimuth, RadProc.SimTracker.SurfSlope, RadProc.SimTracker.SurfAzimuth, RadProc.SimTracker.SurfClearance, RadProc.SimSplitter.HDir,
RadProc.SimSplitter.HDif, RadProc.TimeStampAnalyzed);
// Get front reflected diffuse irradiance, since it contributes to the back
SimPVA[0].CalcEffectiveIrradiance(SimShading.ShadTDir, SimShading.ShadTDif, SimShading.ShadTRef, SimBackTilter.BGlo, RadProc.SimTilter.IncidenceAngle, SimMet.MonthOfYear, SimSpectral.clearnessCorrection);
// Get incidence angle modifiers for components of irradiance
SimPVA[0].CalcIAM(out SimBackTilter.IAMDir, out SimBackTilter.IAMDif, out SimBackTilter.IAMRef, RadProc.SimTilterOpposite.IncidenceAngle);
// Calculate back side global irradiance
SimBackTilter.Calculate(RadProc.SimTracker.SurfSlope, RadProc.SimTracker.SurfClearance, RadProc.SimSplitter.HDif, SimPVA[0].TDifRef, SimMet.HGlo, SimGround.frontGroundGHI, SimGround.rearGroundGHI, SimGround.aveGroundGHI,
SimMet.MonthOfYear, SimShading.BackBeamSF, RadProc.SimTilterOpposite.TDir, RadProc.TimeStampAnalyzed);
}
else
{
SimBackTilter.BGlo = 0;
}
// Calculating spectral model effects
SimSpectral.Calculate(SimMet.HGlo, RadProc.SimSun.NExtra, RadProc.SimSun.Zenith);
try
{
// Calculate PV Array Output for inputs read in this loop
for (int j = 0; j < ReadFarmSettings.SubArrayCount; j++)
{
// Adjust the IV Curve based on Temperature and Irradiance.
SimPVA[j].CalcIVCurveParameters(SimMet.TGlo, SimShading.ShadTDir, SimShading.ShadTDif, SimShading.ShadTRef, SimBackTilter.BGlo, RadProc.SimTilter.IncidenceAngle, SimMet.TAmbient, SimMet.WindSpeed, SimMet.TModMeasured, SimMet.MonthOfYear, SimSpectral.clearnessCorrection);
// Check Inverter status to determine if the Inverter is ON or OFF
GetInverterStatus(j);
// If inverter is off set appropriate variables to 0 and recalculate array in open circuit voltage
if (!SimInv[j].isON)
{
SimInv[j].ACPwrOut = 0;
SimInv[j].IOut = 0;
SimPVA[j].CalcAtOpenCircuit();
SimPVA[j].Calculate(false, SimPVA[j].Voc, YearsSinceStart);
}
//performing AC wiring calculations
SimACWiring[j].Calculate(SimInv[j]);
// Assigning the outputs to the dictionary
ReadFarmSettings.Outputlist["SubArray_Current" + (j + 1).ToString()] = SimPVA[j].IOut;
ReadFarmSettings.Outputlist["SubArray_Voltage" + (j + 1).ToString()] = SimPVA[j].VOut;
ReadFarmSettings.Outputlist["SubArray_Power" + (j + 1).ToString()] = SimPVA[j].POut / 1000;
ReadFarmSettings.Outputlist["SubArray_Current_Inv" + (j + 1).ToString()] = SimInv[j].IOut;
ReadFarmSettings.Outputlist["SubArray_Voltage_Inv" + (j + 1).ToString()] = SimInv[j].itsOutputVoltage;
ReadFarmSettings.Outputlist["SubArray_Power_Inv" + (j + 1).ToString()] = SimInv[j].ACPwrOut / 1000;
}
// Calculating total farm output and total ohmic loss
farmACOutput = 0;
farmACOhmicLoss = 0;
for (int i = 0; i < SimInv.Length; i++)
{
farmACOutput += SimInv[i].ACPwrOut;
farmACOhmicLoss += SimACWiring[i].ACWiringLoss;
}
SimTransformer.Calculate(farmACOutput - farmACOhmicLoss);
// Calculating outputs that will be assigned for this interval
// Shading each component of the Tilted radiaton
// Using horizon affected tilted radiation
ShadGloLoss = (RadProc.SimTilter.TGlo - SimShading.ShadTGlo) - RadProc.SimHorizonShading.LossGlo;
ShadGloFactor = (RadProc.SimTilter.TGlo > 0 ? SimShading.ShadTGlo / RadProc.SimTilter.TGlo : 1);
ShadBeamLoss = RadProc.SimHorizonShading.TDir - SimShading.ShadTDir;
ShadDiffLoss = RadProc.SimTilter.TDif > 0 ? RadProc.SimHorizonShading.TDif - SimShading.ShadTDif : 0;
ShadRefLoss = RadProc.SimTilter.TRef > 0 ? RadProc.SimHorizonShading.TRef - SimShading.ShadTRef : 0;
//Calculating total farm level variables. Cleaning them so they are non-cumulative.
farmDC = 0;
farmDCCurrent = 0;
farmDCMismatchLoss = 0;
farmDCModuleQualityLoss = 0;
farmDCModuleLIDLoss = 0;
farmDCModuleAgeingLoss = 0;
farmDCOhmicLoss = 0;
farmDCSoilingLoss = 0;
farmDCTemp = 0;
farmTotalModules = 0;
farmPNomDC = 0;
farmPNomAC = 0;
farmACPMinThreshLoss = 0;
farmACClippingPower = 0;
farmACMaxVoltageLoss = 0;
farmACMinVoltageLoss = 0;
farmPnom = 0;
farmTempLoss = 0;
farmRadLoss = 0;
for (int i = 0; i < SimPVA.Length; i++)
{
farmDC += SimPVA[i].POut;
farmDCCurrent += SimPVA[i].IOut;
farmDCMismatchLoss += Math.Max(0, SimPVA[i].MismatchLoss);
farmDCModuleQualityLoss += SimPVA[i].ModuleQualityLoss;
farmDCModuleLIDLoss += SimPVA[i].ModuleLIDLoss;
farmDCModuleAgeingLoss += SimPVA[i].ModuleAgeingLoss;
farmDCOhmicLoss += SimPVA[i].OhmicLosses;
farmDCSoilingLoss += SimPVA[i].SoilingLoss;
farmDCTemp += SimPVA[i].TModule * SimPVA[i].itsNumModules;
farmTotalModules += SimPVA[i].itsNumModules;
farmPNomDC += SimPVA[i].itsPNomDCArray;
farmPNomAC += SimInv[i].itsPNomArrayAC;
farmACPMinThreshLoss += SimInv[i].LossPMinThreshold;
farmACClippingPower += SimInv[i].LossClipping;
farmACMaxVoltageLoss += SimInv[i].LossHighVoltage;
farmACMinVoltageLoss += SimInv[i].LossLowVoltage;
farmPnom += (SimPVA[i].itsPNom * SimPVA[i].itsNumModules) * SimPVA[i].RadEff / 1000;
farmTempLoss += SimPVA[i].tempLoss;
farmRadLoss += SimPVA[i].radLoss;
}
// Averages all PV Array temperature values
farmDCTemp /= farmTotalModules;
farmModuleTempAndAmbientTempDiff = farmDCTemp - SimMet.TAmbient;
farmDCEfficiency = (RadProc.SimTilter.TGlo > 0 ? farmDC / (RadProc.SimTilter.TGlo * farmArea) : 0) * 100;
farmPNomDC = Utilities.ConvertWtokW(farmPNomDC);
farmPNomAC = Utilities.ConvertWtokW(farmPNomAC);
farmOverAllEff = (RadProc.SimTilter.TGlo > 0 && SimTransformer.POut > 0 ? SimTransformer.POut / (RadProc.SimTilter.TGlo * farmArea) : 0) * 100;
farmPR = RadProc.SimTilter.TGlo > 0 && farmPNomDC > 0 && SimTransformer.POut > 0 ? SimTransformer.POut / RadProc.SimTilter.TGlo / farmPNomDC : 0;
farmSysIER = (SimTransformer.itsPNom - SimTransformer.POut) / (RadProc.SimTilter.TGlo * 1000);
}
catch (Exception ce)
{
ErrorLogger.Log(ce, ErrLevel.FATAL);
}
// Assigning Outputs for this class.
AssignOutputs();
}
