/// <summary>
/// Ctor for low Mach number flows.
/// </summary>
/// <param name="Component"></param>
/// <param name="Bcmap"></param>
/// <param name="EoS"></param>
public Divergence_CentralDifferenceJacobian(int Component, IncompressibleBoundaryCondMap Bcmap, int SpatDim, MaterialLaw EoS, int NumberOfSpecies = -1)
: this(Component, Bcmap, SpatDim)
{
this.EoS = EoS;
switch (Bcmap.PhysMode)
{
case PhysicsMode.Incompressible:
case PhysicsMode.Multiphase:
throw new ApplicationException("Wrong constructor");
case PhysicsMode.MixtureFraction:
m_ArgumentOrdering = ArrayTools.Cat(VariableNames.VelocityVector(SpatDim), new string[] { VariableNames.MixtureFraction });
m_ParameterOrdering = null;
this.NumberOfSpecies = NumberOfSpecies;
break;
case PhysicsMode.LowMach:
m_ArgumentOrdering = ArrayTools.Cat(VariableNames.VelocityVector(SpatDim), new string[] { VariableNames.Temperature });
break;
case PhysicsMode.Combustion:
if (NumberOfSpecies == -1)
{
throw new ArgumentException("NumberOfSpecies must be specified for combustion flows.");
}
string[] Parameters = ArrayTools.Cat(new string[] { VariableNames.Temperature }, VariableNames.MassFractions(NumberOfSpecies - 1));
this.NumberOfSpecies = NumberOfSpecies;
m_ArgumentOrdering = ArrayTools.Cat(VariableNames.VelocityVector(SpatDim), Parameters);
break;
default:
throw new NotImplementedException();
}
}
/// <summary>
/// ctor; parameter documentation see <see cref="swipViscosityBase.swipViscosityBase"/>.
/// </summary>
public swipViscosity_Term2(double _penalty, int iComp, int D, IncompressibleBoundaryCondMap bcmap,
ViscosityOption _ViscosityMode, ViscositySolverMode ViscSolverMode = ViscositySolverMode.FullyCoupled,
double constantViscosityValue = double.NaN, double reynolds = double.NaN, MaterialLaw EoS = null)
: base(_penalty, iComp, D, bcmap, _ViscosityMode, constantViscosityValue, reynolds, EoS)
{
this.ViscSolverMode = ViscSolverMode;
}
/// <summary>
/// Ctor.
/// </summary>
/// <param name="Reynolds"></param>
/// <param name="Schmidt"></param>
/// <param name="EoS">Material law</param>
/// <param name="PenaltyBase">C.f. Calculation of SIP penalty base, cf. Chapter 3 in
/// K. Hillewaert, “Development of the discontinuous Galerkin method for high-resolution, large scale CFD and acoustics in industrial geometries”,
/// Université catholique de Louvain, 2013.</param>
/// <param name="BcMap">Boundary condition map</param>
/// <param name="Mode">Equation type. Can be Temperature or MassFraction</param>
/// <param name="Argument">The argument of the flux. Must be compatible with the DiffusionMode.</param>
/// <param name="PenaltyLengthScales"></param>
public SIPDiffusion(double Reynolds, double Schmidt, MaterialLaw EoS, double PenaltyBase, MultidimensionalArray PenaltyLengthScales, IncompressibleBoundaryCondMap BcMap, DiffusionMode Mode, string Argument)
{
this.m_Reynolds = Reynolds;
this.m_Schmidt = Schmidt;
this.EoS = EoS;
this.PenaltyBase = PenaltyBase;
this.BcMap = BcMap;
this.ArgumentFunction = BcMap.bndFunction[Argument];
this.Mode = Mode;
this.Argument = Argument;
this.cj = PenaltyLengthScales;
switch (BcMap.PhysMode)
{
case PhysicsMode.LowMach:
this.m_ParameterOrdering = new string[] { VariableNames.Temperature0 };
break;
case PhysicsMode.Combustion:
this.m_ParameterOrdering = new string[] { VariableNames.Temperature0, VariableNames.MassFraction0_0, VariableNames.MassFraction1_0, VariableNames.MassFraction2_0, VariableNames.MassFraction3_0 };
break;
default:
throw new ApplicationException("Wrong physicsMode");
}
}
/// <summary>
/// Ctor for low Mach number flows.
/// </summary>
/// <param name="Component"></param>
/// <param name="Bcmap"></param>
/// <param name="EoS"></param>
public Divergence_CentralDifference(int Component, IncompressibleBoundaryCondMap Bcmap, MaterialLaw EoS, int NumberOfReactants = -1)
: this(Component, Bcmap)
{
this.EoS = EoS;
switch (Bcmap.PhysMode)
{
case PhysicsMode.Incompressible:
case PhysicsMode.Multiphase:
throw new ApplicationException("Wrong constructor");
case PhysicsMode.LowMach:
this.m_ParamterOrdering = new string[] { VariableNames.Temperature0 };
break;
case PhysicsMode.Combustion:
this.m_ParamterOrdering = ArrayTools.Cat(new string[] { VariableNames.Temperature0 }, VariableNames.MassFractions0(NumberOfReactants));
this.NumberOfReactants = NumberOfReactants;
if (NumberOfReactants == -1)
{
throw new ArgumentException("NumberOfReactants must be specified for combustion flows.");
}
break;
default:
throw new NotImplementedException();
}
}
/// <summary>
/// Ctor for incompressible flows.
/// </summary>
/// <param name="Component"></param>
/// <param name="Bcmap"></param>
public Divergence_CentralDifferenceJacobian(int Component, IncompressibleBoundaryCondMap Bcmap, int SpatDim)
{
this.Component = Component;
this.Bcmap = Bcmap;
this.VelFunction = Bcmap.bndFunction[VariableNames.Velocity_d(Component)];
m_SpatialDimension = SpatDim;
m_ArgumentOrdering = ArrayTools.Cat(VariableNames.VelocityVector(SpatDim));
}
/// <summary>
/// Cartesian grid, nothing fancy.
/// </summary>
public void CreateGrid(Context _Context, out GridCommons grd, out IncompressibleBoundaryCondMap bcMap)
{
grd = new Cartesian2DGrid(_Context.CommMaster, Grid1D.Linspace(-2, 2, 10), Grid1D.Linspace(-2, 2, 10));
grd.EdgeTagsNames.Add(1, "Pressure_Outlet");
grd.DefineEdgeTags(x => 1);
bcMap = null;
}
/// <summary>
/// Ctor.
/// </summary>
/// <param name="Reynolds"></param>
/// <param name="Prandtl"></param>
/// <param name="EoS"></param>
/// <param name="PenaltyBase"></param>
/// <param name="BcMap"></param>
public swipHeatConduction(double Reynolds, double Prandtl, MaterialLaw EoS, double PenaltyBase, IncompressibleBoundaryCondMap BcMap)
{
this.Reynolds = Reynolds;
this.Prandtl = Prandtl;
this.EoS = EoS;
this.PenaltyBase = PenaltyBase;
this.BcMap = BcMap;
this.TemperatureFunction = BcMap.bndFunction[VariableNames.Temperature];
}
/// <summary>
/// Ctor for incompressible flows.
/// </summary>
/// <param name="SpatDim">
/// Spatial dimension (either 2 or 3).
/// </param>
/// <param name="_bcmap"></param>
/// <param name="_component"></param>
/// <param name="UseBoundaryVelocityParameter">
/// True, if (an offset to) the boundary velocity is supplied in form of parameter variables.
/// </param>
public LinearizedConvection(int SpatDim, IncompressibleBoundaryCondMap _bcmap, int _component, bool UseBoundaryVelocityParameter = false)
: this(SpatDim, _bcmap, _component)
{
m_UseBoundaryVelocityParameter = UseBoundaryVelocityParameter;
m_ParameterOrdering = ArrayTools.Cat(VariableNames.Velocity0Vector(SpatDim), VariableNames.Velocity0MeanVector(SpatDim));
if (m_UseBoundaryVelocityParameter)
{
m_ParameterOrdering = ArrayTools.Cat(m_ParameterOrdering, VariableNames.BoundaryVelocityVector(SpatDim));
}
}
/// <summary>
/// Ctor
/// </summary>
/// <param name="SpatDim">Spatial dimension (either 2 or 3)</param>
/// <param name="BcMap"></param>
/// <param name="EoS">Null for multiphase. Has to be given for Low-Mach and combustion to calculate density.</param>
/// <param name="Argument">Variable name of the argument (e.g. "Temperature" or "MassFraction0")</param>
public LinearizedScalarConvection2(int SpatDim, int NumberOfReactants, IncompressibleBoundaryCondMap BcMap, MaterialLaw EoS, string Argument = null)
{
this.NumberOfReactants = NumberOfReactants;
m_SpatialDimension = SpatDim;
m_bcmap = BcMap;
switch (BcMap.PhysMode)
{
case PhysicsMode.Multiphase:
this.Argument = VariableNames.LevelSet;
m_ArgumentOrdering = new string[] { VariableNames.LevelSet };
m_ParameterOrdering = ArrayTools.Cat(VariableNames.Velocity0Vector(SpatDim), VariableNames.Velocity0MeanVector(SpatDim));
break;
case PhysicsMode.LowMach:
this.Argument = VariableNames.Temperature;
m_ParameterOrdering = ArrayTools.Cat(VariableNames.Velocity0Vector(SpatDim), VariableNames.Velocity0MeanVector(SpatDim),
VariableNames.Temperature0, VariableNames.Temperature0Mean);
m_ArgumentOrdering = new string[] { VariableNames.Temperature };
if (EoS == null)
{
throw new ApplicationException("EoS has to be given for Low-Mach flows to calculate density.");
}
else
{
this.EoS = EoS;
}
break;
case PhysicsMode.Combustion:
this.Argument = Argument;
m_ParameterOrdering = ArrayTools.Cat(
VariableNames.Velocity0Vector(SpatDim),
VariableNames.Velocity0MeanVector(SpatDim),
VariableNames.Temperature0,
VariableNames.MassFractions0(NumberOfReactants),
VariableNames.Temperature0Mean,
VariableNames.MassFractionsMean(NumberOfReactants));
m_ArgumentOrdering = new string[] { Argument };
if (EoS == null)
{
throw new ApplicationException("EoS has to be given for Low-Mach flows to calculate density.");
}
else
{
this.EoS = EoS;
}
break;
default:
throw new NotImplementedException();
}
}
/// <summary>
/// Ctor.
/// </summary>
/// <param name="Reynolds"></param>
/// <param name="Schmidt"></param>
/// <param name="EoS">Material law</param>
/// <param name="PenaltyBase">C.f. Calculation of SIP penalty base, cf. Chapter 3 in
/// K. Hillewaert, “Development of the discontinuous Galerkin method for high-resolution, large scale CFD and acoustics in industrial geometries”,
/// Université catholique de Louvain, 2013.</param>
/// <param name="BcMap">Boundary condition map</param>
/// <param name="Mode">Equation type. Can be Temperature or MassFraction</param>
/// <param name="Argument">The argument of the flux. Must be compatible with the DiffusionMode.</param>
/// <param name="PenaltyLengthScales"></param>
public SIPDiffusion(double Reynolds, double Schmidt, MaterialLaw EoS, double PenaltyBase, MultidimensionalArray PenaltyLengthScales, IncompressibleBoundaryCondMap BcMap, DiffusionMode Mode, string Argument)
{
this.Reynolds = Reynolds;
this.Schmidt = Schmidt;
this.EoS = EoS;
this.PenaltyBase = PenaltyBase;
this.BcMap = BcMap;
this.ArgumentFunction = BcMap.bndFunction[Argument];
this.Mode = Mode;
this.Argument = Argument;
this.cj = PenaltyLengthScales;
}
/// <summary>
/// Ctor for common part of incompressible and low Mach number flows.
/// </summary>
public UpwindMomentumConvection(int SpatDim, IncompressibleBoundaryCondMap _bcmap, int _component, double __rho)
{
m_SpatialDimension = SpatDim;
m_bcmap = _bcmap;
m_component = _component;
m_rho = __rho;
velFunction = new Func <double[], double, double> [m_bcmap.MaxEdgeTagNo, SpatDim];
for (int d = 0; d < SpatDim; d++)
{
velFunction.SetColumn(m_bcmap.bndFunction[VariableNames.Velocity_d(d)], d);
}
}
/// <summary>
/// ctor.
/// </summary>
/// <param name="_penaltyBase"></param>
/// <param name="iComp">
/// component index
/// </param>
/// <param name="D">
/// spatial dimension.
/// </param>
/// <param name="bcmap"></param>
/// <param name="_ViscosityMode">
/// see <see cref="ViscosityOption"/>
/// </param>
/// <param name="constantViscosityValue">
/// Constant value for viscosity.
/// Needs to be given for <see cref="ViscosityOption.ConstantViscosity"/>.
/// </param>
/// <param name="reynolds">
/// Reynolds number for dimensionless formulation.
/// Needs to be given for <see cref="ViscosityOption.ConstantViscosityDimensionless"/> and <see cref="ViscosityOption.VariableViscosityDimensionless"/>.
/// </param>
/// <param name="EoS">
/// Optional material law for calculating the viscosity
/// as a function of the level-set.
/// Only available for <see cref="ViscosityOption.VariableViscosity"/> and <see cref="ViscosityOption.VariableViscosityDimensionless"/>.
/// </param>
protected swipViscosityBase(
double _penaltyBase,
int iComp, int D, IncompressibleBoundaryCondMap bcmap,
ViscosityOption _ViscosityMode, double constantViscosityValue = double.NaN, double reynolds = double.NaN, MaterialLaw EoS = null)
{
//Func<double, int, int, MultidimensionalArray, double> ComputePenalty = null) {
this.m_penalty_base = _penaltyBase;
//this.m_ComputePenalty = ComputePenalty;
this.m_iComp = iComp;
this.m_D = D;
//this.cj = PenaltyLengthScales;
velFunction = D.ForLoop(d => bcmap.bndFunction[VariableNames.Velocity_d(d)]);
EdgeTag2Type = bcmap.EdgeTag2Type;
this.m_PhysicsMode = bcmap.PhysMode;
this.m_ViscosityMode = _ViscosityMode;
switch (_ViscosityMode)
{
case ViscosityOption.ConstantViscosity:
if (double.IsNaN(constantViscosityValue))
{
throw new ArgumentException("constantViscosityValue is missing!");
}
this.m_constantViscosityValue = constantViscosityValue;
break;
case ViscosityOption.ConstantViscosityDimensionless:
if (double.IsNaN(reynolds))
{
throw new ArgumentException("reynolds number is missing!");
}
this.m_reynolds = reynolds;
break;
case ViscosityOption.VariableViscosity:
this.m_EoS = EoS;
break;
case ViscosityOption.VariableViscosityDimensionless:
if (double.IsNaN(reynolds))
{
throw new ArgumentException("reynolds number is missing!");
}
this.m_reynolds = reynolds;
this.m_EoS = EoS;
break;
default:
throw new NotImplementedException();
}
}
/// <summary>
/// Ctor for common part of incompressible and low Mach number flows.
/// </summary>
/// <param name="SpatDim"></param>
/// <param name="_bcmap"></param>
/// <param name="_component"></param>
private LinearizedConvection(int SpatDim, IncompressibleBoundaryCondMap _bcmap, int _component)
{
m_SpatialDimension = SpatDim;
m_bcmap = _bcmap;
m_component = _component;
velFunction = new Func <double[], double, double> [GridCommons.FIRST_PERIODIC_BC_TAG, SpatDim];
for (int d = 0; d < SpatDim; d++)
{
velFunction.SetColumn(m_bcmap.bndFunction[VariableNames.Velocity_d(d)], d);
}
PhysMode = _bcmap.PhysMode;
}
/// <summary>
/// Ctor.
/// </summary>
/// <param name="SpatDimension"></param>
/// <param name="EoS"></param>
/// <param name="bcmap"></param>
public CoupledLaxFriedrichsScalar(int SpatDimension, MaterialLaw EoS, IncompressibleBoundaryCondMap bcmap)
{
this.SpatDimension = SpatDimension;
this.EoS = EoS;
this.bcmap = bcmap;
velFunction = new Func <double[], double, double> [GridCommons.FIRST_PERIODIC_BC_TAG, SpatDimension];
for (int d = 0; d < SpatDimension; d++)
{
velFunction.SetColumn(bcmap.bndFunction[VariableNames.Velocity_d(d)], d);
}
scalarFunction = bcmap.bndFunction[VariableNames.LevelSet];
}
/// <summary>
/// Ctor for variable density flows,
/// i.e. low Mach number flows and
/// multiphase flows with smooth interface.
/// </summary>
/// <param name="SpatDim">
/// Spatial dimension (either 2 or 3).
/// </param>
/// <param name="_bcmap"></param>
/// <param name="_component"></param>
/// <param name="EoS">
/// Material law for variable density flows.
/// </param>
public LinearizedConvection(int SpatDim, IncompressibleBoundaryCondMap _bcmap, int _component, MaterialLaw EoS, int NumberOfReactants = -1)
: this(SpatDim, _bcmap, _component)
{
//m_VariableDensity = true;
this.EoS = EoS;
this.NumberOfReactants = NumberOfReactants;
switch (_bcmap.PhysMode)
{
case PhysicsMode.LowMach:
scalarFunction = m_bcmap.bndFunction[VariableNames.Temperature];
m_ParameterOrdering = ArrayTools.Cat(VariableNames.Velocity0Vector(SpatDim),
VariableNames.Velocity0MeanVector(SpatDim),
VariableNames.Temperature0,
VariableNames.Temperature0Mean);
break;
case PhysicsMode.Multiphase:
scalarFunction = m_bcmap.bndFunction[VariableNames.LevelSet];
m_ParameterOrdering = ArrayTools.Cat(VariableNames.Velocity0Vector(SpatDim),
VariableNames.Velocity0MeanVector(SpatDim),
VariableNames.Phi0,
VariableNames.Phi0Mean);
break;
case PhysicsMode.Combustion:
if (NumberOfReactants == -1)
{
throw new ArgumentException("NumberOfReactants needs to be specified!");
}
m_ParameterOrdering = ArrayTools.Cat(
VariableNames.Velocity0Vector(SpatDim),
VariableNames.Velocity0MeanVector(SpatDim),
VariableNames.Temperature0,
VariableNames.MassFractions0(NumberOfReactants),
VariableNames.Temperature0Mean,
VariableNames.MassFractionsMean(NumberOfReactants));
break;
case PhysicsMode.Viscoelastic:
throw new ApplicationException("Using of wrong constructor for viscoelastic flows.");
case PhysicsMode.Incompressible:
throw new ApplicationException("Using of wrong constructor for incompressible flows.");
default:
throw new NotImplementedException();
}
}
/// <summary>
/// Ctor
/// intended for use in the context of RANS turbulence model equations
/// </summary>
public LinearizedScalarConvection(int SpatDim, IncompressibleBoundaryCondMap BcMap, string TurbulentVariable, string TurbulentVariable0, string TurbulentVariable0Mean)
{
if (BcMap.PhysMode != PhysicsMode.RANS)
{
throw new ApplicationException("This Constructor is only intended for RANS turbulence model equations");
}
m_SpatialDimension = SpatDim;
m_bcmap = BcMap;
velFunction = new Func <double[], double, double> [SpatDim][];
for (int d = 0; d < SpatDim; d++)
{
velFunction[d] = m_bcmap.bndFunction[VariableNames.Velocity_d(d)];
}
scalarFunction = m_bcmap.bndFunction[TurbulentVariable];
m_ArgumentOrdering = new string[] { TurbulentVariable };
m_ParameterOrdering = ArrayTools.Cat(VariableNames.Velocity0Vector(SpatDim), VariableNames.Velocity0MeanVector(SpatDim),
TurbulentVariable0, TurbulentVariable0Mean);
}
/// <summary>
/// Ctor
/// </summary>
/// <param name="SpatDim">Spatial dimension (either 2 or 3)</param>
/// <param name="BcMap"></param>
/// <param name="EoS">
/// Null for multiphase.
/// Has to be given for Low-Mach to calculate density.
/// </param>
public LinearizedScalarConvection(int SpatDim, IncompressibleBoundaryCondMap BcMap, MaterialLaw EoS)
{
m_SpatialDimension = SpatDim;
m_bcmap = BcMap;
velFunction = new Func <double[], double, double> [SpatDim][];
for (int d = 0; d < SpatDim; d++)
{
velFunction[d] = m_bcmap.bndFunction[VariableNames.Velocity_d(d)];
}
switch (BcMap.PhysMode)
{
case PhysicsMode.Multiphase:
scalarFunction = m_bcmap.bndFunction[VariableNames.LevelSet];
m_ArgumentOrdering = new string[] { VariableNames.LevelSet };
m_ParameterOrdering = ArrayTools.Cat(VariableNames.Velocity0Vector(SpatDim), VariableNames.Velocity0MeanVector(SpatDim));
break;
case PhysicsMode.LowMach:
case PhysicsMode.Combustion:
scalarFunction = m_bcmap.bndFunction[VariableNames.Temperature];
m_ArgumentOrdering = new string[] { VariableNames.Temperature };
m_ParameterOrdering = ArrayTools.Cat(VariableNames.Velocity0Vector(SpatDim), VariableNames.Velocity0MeanVector(SpatDim),
VariableNames.Temperature0, VariableNames.Temperature0Mean);
if (EoS == null)
{
throw new ApplicationException("EoS has to be given for Low-Mach flows to calculate density.");
}
else
{
this.EoS = EoS;
}
break;
default:
throw new NotImplementedException();
}
}
/// <summary>
/// ctor; parameter documentation see <see cref="swipViscosityBase.swipViscosityBase"/>.
/// </summary>
public swipViscosity_Term1(double _penalty, int iComp, int D, IncompressibleBoundaryCondMap bcmap,
ViscosityOption _ViscosityMode, double constantViscosityValue = double.NaN, double reynolds = double.NaN, MaterialLaw EoS = null)
//Func<double, int, int, MultidimensionalArray, double> ComputePenalty = null)
: base(_penalty, iComp, D, bcmap, _ViscosityMode, constantViscosityValue, reynolds, EoS)
{
}
/// <summary>
/// Ctor
/// </summary>
/// <param name="SpatDim">Spatial dimension (either 2 or 3)</param>
/// <param name="NumberOfReactants"></param>
/// <param name="BcMap"></param>
/// <param name="EoS">Null for multiphase. Has to be given for Low-Mach and combustion to calculate density.</param>
/// <param name="idx">Index of scalar in array, </param>
/// <param name="Argument">Variable name of the argument (e.g. "Temperature" or "MassFraction0")</param>
public LinearizedScalarConvection2Jacobi(int SpatDim, int NumberOfReactants, IncompressibleBoundaryCondMap BcMap, MaterialLaw EoS, int idx)
{
this.NumberOfReactants = NumberOfReactants;
m_SpatialDimension = SpatDim;
m_bcmap = BcMap;
argumentIndex = m_SpatialDimension + idx;
velFunction = new Func <double[], double, double> [GridCommons.FIRST_PERIODIC_BC_TAG, SpatDim];
for (int d = 0; d < SpatDim; d++)
{
velFunction.SetColumn(m_bcmap.bndFunction[VariableNames.Velocity_d(d)], d);
}
switch (BcMap.PhysMode)
{
case PhysicsMode.Multiphase:
//this.Argument = VariableNames.LevelSet;
m_ArgumentOrdering = new string[] { VariableNames.LevelSet };
break;
case PhysicsMode.LowMach:
m_ArgumentOrdering = ArrayTools.Cat(VariableNames.VelocityVector(SpatDim), VariableNames.Temperature); // VelocityX,VelocityY,(VelocityZ), Temperature as variables.
if (EoS == null)
{
throw new ApplicationException("EoS has to be given for Low-Mach flows to calculate density.");
}
else
{
this.EoS = EoS;
}
break;
case PhysicsMode.MixtureFraction:
;
m_ArgumentOrdering = ArrayTools.Cat(VariableNames.VelocityVector(SpatDim), VariableNames.MixtureFraction); // VelocityX,VelocityY,(VelocityZ), MixtureFraction as variables.
if (EoS == null)
{
throw new ApplicationException("EoS has to be given for Low-Mach flows to calculate density.");
}
else
{
this.EoS = EoS;
}
break;
case PhysicsMode.Combustion:
m_ArgumentOrdering = ArrayTools.Cat(VariableNames.VelocityVector(SpatDim), VariableNames.Temperature, VariableNames.MassFractions(NumberOfReactants - 1)); // u,v,w,T, Y0,Y1,Y2,Y3 as variables (Y4 is calculated as Y4 = 1- (Y0+Y1+Y2+Y3)
if (EoS == null)
{
throw new ApplicationException("EoS has to be given for Low-Mach flows to calculate density.");
}
else
{
this.EoS = EoS;
}
break;
default:
throw new NotImplementedException();
}
}
/// <summary>
/// ctor
/// </summary>
/// <param name="_d">
/// spatial direction of derivative
/// </param>
/// <param name="bcmap"></param>
public PressureGradientLin_d(int _d, IncompressibleBoundaryCondMap bcmap)
{
m_d = _d;
m_bcmap = bcmap;
pressureFunction = bcmap.bndFunction[VariableNames.Pressure];
}
/// <summary>
/// Ctor for incompressible flows.
/// </summary>
/// <param name="Component"></param>
/// <param name="Bcmap"></param>
public Divergence_CentralDifference(int Component, IncompressibleBoundaryCondMap Bcmap)
{
this.Component = Component;
this.Bcmap = Bcmap;
this.VelFunction = Bcmap.bndFunction[VariableNames.Velocity_d(Component)];
}
/// <summary>
/// Ctor for incompressible flows.
/// </summary>
/// <param name="component">component of the divergence</param>
/// <param name="bcmap"></param>
public Divergence_DerivativeSource_Flux(int component, IncompressibleBoundaryCondMap bcmap) //, double PresPenalty2) {
{
this.component = component;
this.bcmap = bcmap;
this.bndFunction = bcmap.bndFunction[VariableNames.Velocity_d(component)];
}
/// <summary>
/// Ctor.
/// </summary>
public IP1_Flux_PressureCorrection(double penalty_base, MultidimensionalArray PenaltyLengthScales, IncompressibleBoundaryCondMap _BcMap)
: base(penalty_base, PenaltyLengthScales, VariableNames.PresCor)
{
m_BcMap = _BcMap;
}
/// <summary>
/// ctor; parameter documentation see <see cref="swipViscosityBase.swipViscosityBase"/>.
/// </summary>
public swipViscosity_Term3(double _penalty, MultidimensionalArray PenaltyLengthScales, int iComp, int D, IncompressibleBoundaryCondMap bcmap,
ViscosityImplementation implMode, ViscosityOption _ViscosityMode, ViscositySolverMode ViscSolverMode = ViscositySolverMode.FullyCoupled,
double constantViscosityValue = double.NaN, double reynolds = double.NaN, MaterialLaw EoS = null)
: base(_penalty, PenaltyLengthScales, iComp, D, bcmap, implMode, _ViscosityMode, constantViscosityValue, reynolds, EoS)
{
this.ViscSolverMode = ViscSolverMode;
}