public void CreateDublicate(Document doc, ParameterFilterElement filter, string nameprefix)
{
Autodesk.Revit.DB.View viewcur = doc.ActiveView;
Transaction t = new Transaction(doc);
t.Start("Create new dublicate");
ElementId newViewId = ElementId.InvalidElementId;
Autodesk.Revit.DB.View newView = null;
newViewId = viewcur.Duplicate(ViewDuplicateOption.Duplicate);
newView = viewcur.Document.GetElement(newViewId) as Autodesk.Revit.DB.View;
newView.Name = newView.Name + nameprefix;
t.Commit();
}
//复制视图
public Autodesk.Revit.DB.View CreateDependentCopy(Document doc, ElementId eleId)
{
Autodesk.Revit.DB.View vie = doc.GetElement(eleId) as Autodesk.Revit.DB.View;
Autodesk.Revit.DB.View dependView = null;
ElementId newViewId = null;
if (vie.CanViewBeDuplicated(ViewDuplicateOption.Duplicate))
{
newViewId = vie.Duplicate(ViewDuplicateOption.Duplicate);
dependView = doc.GetElement(newViewId) as Autodesk.Revit.DB.View;
return(dependView);
}
else
{
TaskDialog.Show("Wrong", "该视图不能被带细节复制");
return(dependView);
}
}
/// <summary>
/// Duplicate one existing sheet
/// </summary>
/// <param name="shtNumber">The new sheet number</param>
/// <param name="shtName">The new sheet name</param>
/// <param name="tbName">The title block for the new sheet</param>
/// <param name="vsSourceSheet">The ViewSheet to copy</param>
// public void DuplicateOneSheet(string shtNumber, string shtName, string tbName, ViewSheet vsSourceSheet)
public void DuplicateOneSheet(NewSheetFormat nsf)
{
ViewSheet vsDestinationSheet;
try
{
// try to create the sheet
// see below about copy parameters
vsDestinationSheet = CreateOneEmptySheet(nsf);
}
catch (Exception e)
{
throw new Exception(e.Message);
}
// at this point we have a source and destination ViewSheet
// here we copy the elements on the source ViewSheet and
// place them onto the destination ViewSheet
// except, we don't copy the title block as this was added
// when the ViewSheet was created
// first, get a collection of elements that exist on the source sheet
FilteredElementCollector colViewSheet =
new FilteredElementCollector(_doc, nsf.FcSelViewSht.Id);
// prepare for the elements to "copy" and "paste"
ICollection <ElementId> copyIds = new List <ElementId>();
// this may fail, prepare for the failure and capture the failure message
try
{
// in order to copy detail lines directly onto the sheet, we need to
// setup a SketchPlane on the "blank" sheet
SketchPlane sketch = CreateSketchPlane(vsDestinationSheet);
List <Viewport> vpList = new List <Viewport>(10);
List <Viewport> vpListNoCopy = new List <Viewport>(10);
copyIds.Clear();
// the ViewSheet has been setup to copy / paste or duplicate the elements
// held by the ViewSheet - with the exceptions that ViewPorts cannot be copied
foreach (Element sourceElem in colViewSheet)
{
// ignore GuideGrids
if (sourceElem.Category.Id == _cats.get_Item(BuiltInCategory.OST_GuideGrid).Id)
{
continue;
}
// is the current element a titleblock? - this is the source titleblock
if (sourceElem.Category.Id == _cats.get_Item(BuiltInCategory.OST_TitleBlocks).Id)
{
ConfigureNewTitleBlock(sourceElem, vsDestinationSheet);
continue;
}
// we cannot copy some viewports or GuideGrids
if (sourceElem.Category.Id == _cats.get_Item(BuiltInCategory.OST_Viewports).Id)
{
Viewport vp = (Viewport)sourceElem;
View vw = (View)_doc.GetElement(vp.ViewId);
if (Viewport.CanAddViewToSheet(_doc, vsDestinationSheet.Id, vw.Id))
{
vpList.Add(vp); // got a viewport to copy
}
else
{
vpListNoCopy.Add(vp); // got a viewport I cannot copy
}
continue;
}
// process a not viewport items
copyIds.Add(sourceElem.Id);
}
// preform the actual copy of the elements
if (copyIds.Count > 0)
{
ElementTransformUtils.CopyElements((ViewSheet)nsf.SelectedSheet.SheetView, copyIds, vsDestinationSheet,
Transform.Identity, new CopyPasteOptions());
}
// processed all of the items on the view sheet except for the viewports
// we have a list of viewports we can copy and place onto the sheet
// here we process the list of viewports that cannot be copy / pasted and replicate
// them matching their original location
if (vpList.Count > 0)
{
foreach (Viewport vpSource in vpList)
{
View vw = _doc.GetElement(vpSource.ViewId) as View;
PlaceViewportOnSheet(vsDestinationSheet, vpSource, vw);
}
}
if (vpListNoCopy.Count > 0 && nsf.OperationOption == OperOpType.DupSheetAndViews)
{
// get all of the view names here to make sure it is current
GetAllViewNames();
foreach (Viewport vpSource in vpListNoCopy)
{
View vwSource = _doc.GetElement(vpSource.ViewId) as View;
if (!vwSource.CanViewBeDuplicated(ViewDuplicateOption.WithDetailing))
{
continue;
}
View vwCopy;
// if PrimaryViewId is not InvalidElementId, view is dependant
if (vwSource.GetPrimaryViewId() == ElementId.InvalidElementId)
{
vwCopy = _doc.GetElement(vwSource.Duplicate(ViewDuplicateOption.WithDetailing)) as View;
}
else
{
vwCopy = _doc.GetElement(vwSource.Duplicate(ViewDuplicateOption.AsDependent)) as View;
}
if (vwCopy != null)
{
vwCopy.Name = FindNextViewName(vwSource.Name, nsf);
// vwCopy.Name = FindNextViewName(vwSource.Name, nsf.newSheetNumber);
PlaceViewportOnSheet(vsDestinationSheet, vpSource, vwCopy);
}
}
}
}
catch (Exception e)
{
throw new Exception(AppStrings.R_ErrDupSheetFailDesc + nl + e.Message);
}
}
/// <summary>
/// Duplicates the input sheet a number of times. It allows for ViewDuplicateOption for dependent views.
/// </summary>
/// <param name="m_doc"></param>
/// <param name="sourceSheet"></param>
/// <param name="copies"></param>
/// <param name="dependentOption"></param>
private void DuplicateSheets(Document m_doc, ViewSheet sourceSheet, int copies, ViewDuplicateOption dependentOption)
{
// get Title Block
FamilyInstance titleBlock = new FilteredElementCollector(m_doc)
.OfClass(typeof(FamilyInstance))
.OfCategory(BuiltInCategory.OST_TitleBlocks)
.Cast <FamilyInstance>()
.First(q => q.OwnerViewId == sourceSheet.Id);
using (TransactionGroup tg = new TransactionGroup(m_doc, "Duplicate Sheet"))
{
tg.Start();
for (int i = 0; i < copies; i++)
{
// create unique sheet number
string uniqueSheetNumber = Data.Helpers.CreateUniqueSheetNumber(m_doc, sourceSheet);
using (Transaction t = new Transaction(m_doc, "Duplicate Sheet"))
{
t.Start();
// create new SHEET, new NUMBER and new NAME
ViewSheet newSheet = ViewSheet.Create(m_doc, titleBlock.GetTypeId());
newSheet.SheetNumber = uniqueSheetNumber;
newSheet.Name = sourceSheet.Name;
#region Loop through viewports (except schedules) because GetAllPlacedViews() does not return Schedules
foreach (ElementId eid in sourceSheet.GetAllPlacedViews())
{
// get view element
Autodesk.Revit.DB.View sourceView = m_doc.GetElement(eid) as Autodesk.Revit.DB.View;
Autodesk.Revit.DB.View newView = null; // declare newView variable
// DUPLICATE views
// if view element is legend newView is equal to sourceView
if (sourceView.ViewType == ViewType.Legend)
{
newView = sourceView;
}
else // for non-legend views
{
if (sourceView.GetPrimaryViewId() == ElementId.InvalidElementId) // if parent view
{
ElementId newViewId = sourceView.Duplicate(ViewDuplicateOption.WithDetailing);
newView = m_doc.GetElement(newViewId) as Autodesk.Revit.DB.View;
newView.Name = Data.Helpers.CreateUniqueViewName(m_doc, sourceView);
//newView.ChangeTypeId(sourceTypeId);
}
else // if dependent view
{
ElementId newViewId = sourceView.Duplicate(dependentOption);
newView = m_doc.GetElement(newViewId) as Autodesk.Revit.DB.View;
newView.Name = Data.Helpers.CreateUniqueViewName(m_doc, sourceView);
//newView.ChangeTypeId(sourceTypeId);
}
}
// CREATE viewport and MOVE it
foreach (Viewport vp in new FilteredElementCollector(m_doc).OfClass(typeof(Viewport)))
{
if (vp.SheetId == sourceSheet.Id && vp.ViewId == sourceView.Id)
{
XYZ sourceCenter = vp.GetBoxCenter();
ElementId sourceTypeId = vp.GetTypeId();
Viewport newViewport = Viewport.Create(m_doc, newSheet.Id, newView.Id, XYZ.Zero);
newViewport.ChangeTypeId(sourceTypeId);
Ana_NoOfViewports += 1; // add 1 to the viewport counter
XYZ newCenter = newViewport.GetBoxCenter();
ElementTransformUtils.MoveElement(m_doc, newViewport.Id, new XYZ(
sourceCenter.X - newCenter.X,
sourceCenter.Y - newCenter.Y,
0));
}
}
}
#endregion
#region Loop through schedules
foreach (ScheduleSheetInstance si in (new FilteredElementCollector(m_doc).OfClass(typeof(ScheduleSheetInstance))))
{
if (si.OwnerViewId == sourceSheet.Id)
{
if (!si.IsTitleblockRevisionSchedule)
{
foreach (ViewSchedule viewSchedule in new FilteredElementCollector(m_doc).OfClass(typeof(ViewSchedule)))
{
if (si.ScheduleId == viewSchedule.Id)
{
XYZ sourceCenter = si.Point;
ScheduleSheetInstance newSSheetInstance = ScheduleSheetInstance.Create(m_doc, newSheet.Id, viewSchedule.Id, XYZ.Zero);
XYZ newCenter = newSSheetInstance.Point;
ElementTransformUtils.MoveElement(m_doc, newSSheetInstance.Id, new XYZ(
sourceCenter.X - newCenter.X,
sourceCenter.Y - newCenter.Y,
0));
}
}
}
}
}
#endregion
t.Commit();
}
}
tg.Assimilate();
}
}