//////////////////////////////////////////////////////////////////////////////////////
// This method takes in present position (LatLongClass) and range/bearing from the
// present position. It returns a new position (LatLongClass)
//
// Distance is IN
// Azimuth in degrees
public static LatLongClass CalculateNewPosition(LatLongClass PresentPosition, double Distance, double Azimuth)
{
LatLongClass NewPosition = new LatLongClass();
// instantiate the calculator
GeodeticCalculator geoCalc = new GeodeticCalculator();
// select a reference elllipsoid
Ellipsoid reference = Ellipsoid.WGS84;
// set Lincoln Memorial coordinates
GlobalCoordinates Present_Pos;
Present_Pos = new GlobalCoordinates(new Angle(PresentPosition.GetLatLongDecimal().LatitudeDecimal), new Angle(PresentPosition.GetLatLongDecimal().LongitudeDecimal));
// now, plug the result into to direct solution
GlobalCoordinates dest;
Angle endBearing = new Angle();
double Distance_In_Meeters = (Distance * NMtoKM * 1000.0);
dest = geoCalc.CalculateEndingGlobalCoordinates(reference, Present_Pos, Azimuth, Distance_In_Meeters, out endBearing);
NewPosition.SetPosition(new LatLongDecimal(dest.Latitude.Degrees, dest.Longitude.Degrees));
return NewPosition;
}
//////////////////////////////////////////////////////////////////////////////////////
// This method takes in present position (LatLongClass) and range/bearing from the
// present position. It returns a new position (LatLongClass)
//
// Distance is IN
// Azimuth in degrees
public static LatLongClass CalculateNewPosition(LatLongClass PresentPosition, double Distance, double Azimuth)
{
LatLongClass NewPosition = new LatLongClass();
// instantiate the calculator
GeodeticCalculator geoCalc = new GeodeticCalculator();
// select a reference elllipsoid
Ellipsoid reference = Ellipsoid.WGS84;
// set Lincoln Memorial coordinates
GlobalCoordinates Present_Pos;
Present_Pos = new GlobalCoordinates(new Angle(PresentPosition.GetLatLongDecimal().LatitudeDecimal), new Angle(PresentPosition.GetLatLongDecimal().LongitudeDecimal));
// now, plug the result into to direct solution
GlobalCoordinates dest;
Angle endBearing = new Angle();
double Distance_In_Meeters = (Distance * NMtoKM * 1000.0);
dest = geoCalc.CalculateEndingGlobalCoordinates(reference, Present_Pos, Azimuth, Distance_In_Meeters, out endBearing);
NewPosition.SetPosition(new LatLongDecimal(dest.Latitude.Degrees, dest.Longitude.Degrees));
return(NewPosition);
}
public OutData GetResult()
{
// select a reference elllipsoid
Ellipsoid reference = Ellipsoid.WGS84;
// instantiate the calculator
GeodeticCalculator geoCalc = new GeodeticCalculator();
// Used to calculate the time to the min distance
GlobalPosition Orig_Track_1_Pos = new GlobalPosition(new GlobalCoordinates(Track_1_Pos.Latitude, Track_1_Pos.Longitude));
int UpdateStep = 60 / Properties.Settings.Default.SEepToolUpdateRate;
for (int LookAheadIndex = 1; LookAheadIndex <= ((MaxLookAheadTimeInMinutes * 60) / UpdateStep); LookAheadIndex++)
{
// Calculate new position X seconds ahead for track 1
double Range = (Track_1_SPD / 60) / UpdateStep;
GeoCordSystemDegMinSecUtilities.LatLongClass ResultPosition_1 =
GeoCordSystemDegMinSecUtilities.CalculateNewPosition(new GeoCordSystemDegMinSecUtilities.LatLongClass(Track_1_Pos.Latitude.Degrees, Track_1_Pos.Longitude.Degrees), (double)Range, (double)Track_1_TRK);
GPoint MarkerPositionLocal = FormMain.gMapControl.FromLatLngToLocal(new PointLatLng(ResultPosition_1.GetLatLongDecimal().LatitudeDecimal, ResultPosition_1.GetLatLongDecimal().LongitudeDecimal));
ReturnData.Track_1_Pos_Min.X = MarkerPositionLocal.X;
ReturnData.Track_1_Pos_Min.Y = MarkerPositionLocal.Y;
// Calculate new position X seconds ahead for track 2
Range = (Track_2_SPD / 60) / 15;
GeoCordSystemDegMinSecUtilities.LatLongClass ResultPosition_2 =
GeoCordSystemDegMinSecUtilities.CalculateNewPosition(new GeoCordSystemDegMinSecUtilities.LatLongClass(Track_2_Pos.Latitude.Degrees, Track_2_Pos.Longitude.Degrees), (double)Range, (double)Track_2_TRK);
MarkerPositionLocal = FormMain.gMapControl.FromLatLngToLocal(new PointLatLng(ResultPosition_2.GetLatLongDecimal().LatitudeDecimal, ResultPosition_2.GetLatLongDecimal().LongitudeDecimal));
ReturnData.Track_2_Pos_Min.X = MarkerPositionLocal.X;
ReturnData.Track_2_Pos_Min.Y = MarkerPositionLocal.Y;
double distance1 = geoCalc.CalculateGeodeticMeasurement(reference, Track_1_Pos, Track_2_Pos).PointToPointDistance;
double distance2 = geoCalc.CalculateGeodeticMeasurement(reference, new GlobalPosition(new GlobalCoordinates(ResultPosition_1.GetLatLongDecimal().LatitudeDecimal, ResultPosition_1.GetLatLongDecimal().LongitudeDecimal)),
new GlobalPosition(new GlobalCoordinates(ResultPosition_2.GetLatLongDecimal().LatitudeDecimal, ResultPosition_2.GetLatLongDecimal().LongitudeDecimal))).PointToPointDistance;
// Calculate distance between present and new position
if ((distance1 < distance2) && (LookAheadIndex != 1))
{
ReturnData.Is_Converging = true;
ReturnData.MinDistance = distance2 * 0.00053996; // Convert to nautical miles
double DistanceToTravel = geoCalc.CalculateGeodeticMeasurement(reference, Orig_Track_1_Pos, new GlobalPosition(new GlobalCoordinates(ResultPosition_1.GetLatLongDecimal().LatitudeDecimal, ResultPosition_1.GetLatLongDecimal().LongitudeDecimal))).PointToPointDistance;
DistanceToTravel = DistanceToTravel * 0.00053996; // Convert to nautical miles
ReturnData.SecondsToMinimum = (int)((DistanceToTravel / Track_1_SPD) * 60.0 * 60.0);
// We have reached the minimum distance
break;
}
else if ((distance1 < distance2) && (LookAheadIndex == 1))
{
ReturnData.Is_Converging = false;
break;
}
Track_1_Pos = new GlobalPosition(new GlobalCoordinates(ResultPosition_1.GetLatLongDecimal().LatitudeDecimal, ResultPosition_1.GetLatLongDecimal().LongitudeDecimal));
Track_2_Pos = new GlobalPosition(new GlobalCoordinates(ResultPosition_2.GetLatLongDecimal().LatitudeDecimal, ResultPosition_2.GetLatLongDecimal().LongitudeDecimal));
}
return(ReturnData);
}
public OutData GetResult()
{
// select a reference elllipsoid
Ellipsoid reference = Ellipsoid.WGS84;
// instantiate the calculator
GeodeticCalculator geoCalc = new GeodeticCalculator();
// Used to calculate the time to the min distance
GlobalPosition Orig_Track_1_Pos = new GlobalPosition(new GlobalCoordinates(Track_1_Pos.Latitude, Track_1_Pos.Longitude));
int UpdateStep = 60 / Properties.Settings.Default.SEepToolUpdateRate;
for (int LookAheadIndex = 1; LookAheadIndex <= ((MaxLookAheadTimeInMinutes * 60) / UpdateStep); LookAheadIndex++)
{
// Calculate new position X seconds ahead for track 1
double Range = (Track_1_SPD / 60) / UpdateStep;
GeoCordSystemDegMinSecUtilities.LatLongClass ResultPosition_1 =
GeoCordSystemDegMinSecUtilities.CalculateNewPosition(new GeoCordSystemDegMinSecUtilities.LatLongClass(Track_1_Pos.Latitude.Degrees, Track_1_Pos.Longitude.Degrees), (double)Range, (double)Track_1_TRK);
GPoint MarkerPositionLocal = FormMain.gMapControl.FromLatLngToLocal(new PointLatLng(ResultPosition_1.GetLatLongDecimal().LatitudeDecimal, ResultPosition_1.GetLatLongDecimal().LongitudeDecimal));
ReturnData.Track_1_Pos_Min.X = MarkerPositionLocal.X;
ReturnData.Track_1_Pos_Min.Y = MarkerPositionLocal.Y;
// Calculate new position X seconds ahead for track 2
Range = (Track_2_SPD / 60) / 15;
GeoCordSystemDegMinSecUtilities.LatLongClass ResultPosition_2 =
GeoCordSystemDegMinSecUtilities.CalculateNewPosition(new GeoCordSystemDegMinSecUtilities.LatLongClass(Track_2_Pos.Latitude.Degrees, Track_2_Pos.Longitude.Degrees), (double)Range, (double)Track_2_TRK);
MarkerPositionLocal = FormMain.gMapControl.FromLatLngToLocal(new PointLatLng(ResultPosition_2.GetLatLongDecimal().LatitudeDecimal, ResultPosition_2.GetLatLongDecimal().LongitudeDecimal));
ReturnData.Track_2_Pos_Min.X = MarkerPositionLocal.X;
ReturnData.Track_2_Pos_Min.Y = MarkerPositionLocal.Y;
double distance1 = geoCalc.CalculateGeodeticMeasurement(reference, Track_1_Pos, Track_2_Pos).PointToPointDistance;
double distance2 = geoCalc.CalculateGeodeticMeasurement(reference, new GlobalPosition(new GlobalCoordinates(ResultPosition_1.GetLatLongDecimal().LatitudeDecimal, ResultPosition_1.GetLatLongDecimal().LongitudeDecimal)),
new GlobalPosition(new GlobalCoordinates(ResultPosition_2.GetLatLongDecimal().LatitudeDecimal, ResultPosition_2.GetLatLongDecimal().LongitudeDecimal))).PointToPointDistance;
// Calculate distance between present and new position
if ((distance1 < distance2) && (LookAheadIndex != 1))
{
ReturnData.Is_Converging = true;
ReturnData.MinDistance = distance2 * 0.00053996; // Convert to nautical miles
double DistanceToTravel = geoCalc.CalculateGeodeticMeasurement(reference, Orig_Track_1_Pos, new GlobalPosition(new GlobalCoordinates(ResultPosition_1.GetLatLongDecimal().LatitudeDecimal, ResultPosition_1.GetLatLongDecimal().LongitudeDecimal))).PointToPointDistance;
DistanceToTravel = DistanceToTravel * 0.00053996; // Convert to nautical miles
ReturnData.SecondsToMinimum = (int)((DistanceToTravel / Track_1_SPD) * 60.0 * 60.0);
// We have reached the minimum distance
break;
}
else if ((distance1 < distance2) && (LookAheadIndex == 1))
{
ReturnData.Is_Converging = false;
break;
}
Track_1_Pos = new GlobalPosition(new GlobalCoordinates(ResultPosition_1.GetLatLongDecimal().LatitudeDecimal, ResultPosition_1.GetLatLongDecimal().LongitudeDecimal));
Track_2_Pos = new GlobalPosition(new GlobalCoordinates(ResultPosition_2.GetLatLongDecimal().LatitudeDecimal, ResultPosition_2.GetLatLongDecimal().LongitudeDecimal));
}
return ReturnData;
}
public override void OnRender(Graphics g)
{
g.DrawLine(new Pen(Brush_To_Use), StartPosition, EndPosition);
// select a reference elllipsoid
Ellipsoid reference = Ellipsoid.WGS84;
// instantiate the calculator
GeodeticCalculator geoCalc = new GeodeticCalculator();
GlobalPosition Start = new GlobalPosition(new GlobalCoordinates(this.Position.Lat, this.Position.Lng));
PointLatLng End_LatLng = FormMain.FromLocalToLatLng(EndPosition.X, EndPosition.Y);
GlobalPosition End = new GlobalPosition(new GlobalCoordinates(End_LatLng.Lat, End_LatLng.Lng));
GeodeticMeasurement GM = geoCalc.CalculateGeodeticMeasurement(reference, Start, End);
// Now compute position half way between two points.
double distance = GM.PointToPointDistance / 2.0;
if (distance > 0.0)
{
GlobalCoordinates GC = geoCalc.CalculateEndingGlobalCoordinates(reference, new GlobalCoordinates(this.Position.Lat, this.Position.Lng), GM.Azimuth, distance);
GPoint GP = FormMain.FromLatLngToLocal(new PointLatLng(GC.Latitude.Degrees, GC.Longitude.Degrees));
double Distane_NM = 0.00053996 * GM.PointToPointDistance;
g.DrawString(Math.Round(GM.Azimuth.Degrees).ToString() + "°/" + Math.Round(Distane_NM, 1).ToString() + "nm", new Font(FontFamily.GenericSansSerif, 9), Brush_To_Use, new PointF(GP.X, GP.Y));
}
}
public override void OnRender(Graphics g)
{
Pen MyPen = new Pen(new SolidBrush(LabelAttributes.TargetColor), LabelAttributes.TargetSize);
MyPen.DashStyle = LabelAttributes.TargetStyle;
// Draw AC Symbol
g.DrawRectangle(MyPen, LocalPosition.X - 5, LocalPosition.Y - 5, 10, 10);
AC_SYMB_START_X = LocalPosition.X - 5;
AC_SYMB_START_Y = LocalPosition.Y - 5;
/////////////////////////////////////////////////////////////////////////////////////////////////////////////
// Here handle drawing of Range/Bearing & SEP tool
if (TargetToMonitor != -1)
{
Point StartPosition = new Point(LocalPosition.X, LocalPosition.Y);
Point EndPosition = DynamicDisplayBuilder.GetTargetPositionByIndex(TargetToMonitor);
g.DrawLine(new Pen(Brushes.Yellow, 1), StartPosition, EndPosition);
// select a reference elllipsoid
Ellipsoid reference = Ellipsoid.WGS84;
// instantiate the calculator
GeodeticCalculator geoCalc = new GeodeticCalculator();
GlobalPosition Start = new GlobalPosition(new GlobalCoordinates(this.Position.Lat, this.Position.Lng));
PointLatLng End_LatLng = FormMain.FromLocalToLatLng(EndPosition.X, EndPosition.Y);
GlobalPosition End = new GlobalPosition(new GlobalCoordinates(End_LatLng.Lat, End_LatLng.Lng));
GeodeticMeasurement GM = geoCalc.CalculateGeodeticMeasurement(reference, End, Start);
////////////////////////////////////////////////////////////////////////////////////////////
// Handle SEP Tool
double TRK1_SPD = 0.0, TRK2_SPD = 0.0;
double TRK1_AZ = 0.0, TRK2_AZ = 0.0;
bool Sep_Data_Is_Valid = true;
if (!double.TryParse(CALC_GSPD_STRING, out TRK1_SPD))
{
if (!double.TryParse(DAP_GSPD, out TRK1_SPD))
{
Sep_Data_Is_Valid = false;
}
}
if (!double.TryParse(DynamicDisplayBuilder.GetTarget_CALC_GSPD_ByIndex(TargetToMonitor), out TRK2_SPD))
{
if (!double.TryParse(DynamicDisplayBuilder.GetTarget_DAP_GSPD_ByIndex(TargetToMonitor), out TRK2_SPD))
{
Sep_Data_Is_Valid = false;
}
}
if (!double.TryParse(CALC_HDG_STRING, out TRK1_AZ))
{
if (!double.TryParse(TRK, out TRK1_AZ))
{
if (!double.TryParse(DAP_HDG, out TRK1_AZ))
{
Sep_Data_Is_Valid = false;
}
}
}
if (!double.TryParse(DynamicDisplayBuilder.GetTarget_CALC_HDG_ByIndex(TargetToMonitor), out TRK2_AZ))
{
if (!double.TryParse(DynamicDisplayBuilder.GetTargetTRKByIndex(TargetToMonitor), out TRK2_AZ))
{
if (!double.TryParse(DynamicDisplayBuilder.GetTargetM_HDGByIndex(TargetToMonitor), out TRK2_AZ))
{
Sep_Data_Is_Valid = false;
}
}
}
////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////
// If all the necessary data is avilable
// then pass it on to the SEP tool calculator
// and then draw the result
string SepToolActive = "N/A";
if (Sep_Data_Is_Valid)
{
SEP_Tool_Calculator SepTool = new SEP_Tool_Calculator(Start, End, TRK1_SPD, TRK2_SPD, TRK1_AZ, TRK2_AZ, 20);
SEP_Tool_Calculator.OutData Sep_Tool_Data = SepTool.GetResult();
if (Sep_Tool_Data.Is_Converging)
{
g.DrawRectangle(new Pen(Brushes.Yellow, LabelAttributes.TargetSize), Sep_Tool_Data.Track_1_Pos_Min.X - 5, Sep_Tool_Data.Track_1_Pos_Min.Y - 5, 10, 10);
g.DrawRectangle(new Pen(Brushes.Yellow, LabelAttributes.TargetSize), Sep_Tool_Data.Track_2_Pos_Min.X - 5, Sep_Tool_Data.Track_2_Pos_Min.Y - 5, 10, 10);
g.DrawLine(new Pen(Brushes.Yellow, LabelAttributes.TargetSize), new Point(Sep_Tool_Data.Track_1_Pos_Min.X, Sep_Tool_Data.Track_1_Pos_Min.Y), new Point(StartPosition.X, StartPosition.Y));
g.DrawLine(new Pen(Brushes.Yellow, LabelAttributes.TargetSize), new Point(Sep_Tool_Data.Track_2_Pos_Min.X, Sep_Tool_Data.Track_2_Pos_Min.Y), new Point(EndPosition.X, EndPosition.Y));
TimeSpan T = TimeSpan.FromSeconds(Sep_Tool_Data.SecondsToMinimum);
SepToolActive = "min d:" + Math.Round(Sep_Tool_Data.MinDistance, 1).ToString() + "/" + T.Minutes.ToString() + ":" + T.Seconds.ToString();
}
}
// Now compute position half way between two points.
double distance = GM.PointToPointDistance / 2.0;
if (distance > 0.0)
{
GlobalCoordinates GC = geoCalc.CalculateEndingGlobalCoordinates(reference, new GlobalCoordinates(End_LatLng.Lat, End_LatLng.Lng), GM.Azimuth, distance);
GPoint GP = FormMain.FromLatLngToLocal(new PointLatLng(GC.Latitude.Degrees, GC.Longitude.Degrees));
double Distane_NM = 0.00053996 * GM.PointToPointDistance;
g.DrawString(Math.Round(GM.Azimuth.Degrees).ToString() + "°/" + Math.Round(Distane_NM, 1).ToString() + "nm", new Font(FontFamily.GenericSansSerif, 9), Brushes.Yellow, new PointF(GP.X, GP.Y));
if (Sep_Data_Is_Valid && SepToolActive != "N/A")
{
g.DrawString(SepToolActive, new Font(FontFamily.GenericSansSerif, 9), Brushes.Yellow, new PointF(GP.X, GP.Y + 15));
}
}
}
// Here handle history points
// First draw all previous history points
int Number_of_Points_Drawn = 0;
for (int Index = HistoryPoints.Count - 2; Index >= 0; Index--)
{
if (Number_of_Points_Drawn < Properties.Settings.Default.HistoryPoints)
{
HistoryPointsType I = HistoryPoints.ElementAt(Index);
GPoint MarkerPositionLocal = FormMain.gMapControl.FromLatLngToLocal(new PointLatLng(I.LatLong.Lat, I.LatLong.Lng));
g.DrawEllipse(MyPen, MarkerPositionLocal.X, MarkerPositionLocal.Y, 3, 3);
Number_of_Points_Drawn++;
}
}
//////////////////////////////////////////////////////////////////////////////////////////////////////////////////
// Here draw speed vector
// // Find out what data should be used for speed vector? IAS, TAS, GSPD, MACH?
if ((DataItemValidator(CALC_HDG_STRING) || DataItemValidator(DAP_HDG) || DataItemValidator(TRK)) && (DataItemValidator(DAP_GSPD) || DataItemValidator(CALC_GSPD_STRING)))
{
double Azimuth = 0.0;
double Range = 0.0;
if (DataItemValidator(CALC_GSPD_STRING))
{
Range = double.Parse(CALC_GSPD_STRING);
}
else
{
Range = double.Parse(DAP_GSPD);
}
if (DataItemValidator(CALC_HDG_STRING))
{
Azimuth = double.Parse(CALC_HDG_STRING);
}
else if (DataItemValidator(TRK))
{
Azimuth = double.Parse(TRK);
}
else
{
Azimuth = double.Parse(DAP_HDG);
}
Range = (Range / 60) * (double)Properties.Settings.Default.SpeedVector;
GeoCordSystemDegMinSecUtilities.LatLongClass ResultPosition =
GeoCordSystemDegMinSecUtilities.CalculateNewPosition(new GeoCordSystemDegMinSecUtilities.LatLongClass(Position.Lat, Position.Lng), (double)Range, (double)Azimuth);
GPoint MarkerPositionLocal = FormMain.gMapControl.FromLatLngToLocal(new PointLatLng(ResultPosition.GetLatLongDecimal().LatitudeDecimal, ResultPosition.GetLatLongDecimal().LongitudeDecimal));
g.DrawLine(MyPen, new Point(LocalPosition.X, LocalPosition.Y), new Point(MarkerPositionLocal.X, MarkerPositionLocal.Y));
}
else
{
int T = 9;
int r = T;
}
//////////////////////////////////////////////////////////////////////////////////////////////////////////////////
MyPen = new Pen(new SolidBrush(LabelAttributes.LineColor), LabelAttributes.LineWidth);
MyPen.DashStyle = LabelAttributes.LineStyle;
// Draw leader line
g.DrawLine(MyPen, new Point(LocalPosition.X, LocalPosition.Y), new Point(LocalPosition.X - LabelOffset.X, LocalPosition.Y - LabelOffset.Y));
// Draw label box
Point LabelStartPosition = GetLabelStartingPoint();
// Recalculate Label Width each cycle to adjust for the possible changes in the number of lines
// and changes in the text size
LabelHeight = 0;
// Draw ModeA and coast indicator
g.DrawString(ModeA_CI_STRING, ModeA_CI_FONT, ModeA_CI_BRUSH, LabelStartPosition.X + ModeA_CI_OFFSET.X, LabelStartPosition.Y + SpacingIndex);
LabelHeight = LabelHeight + (int)ModeA_CI_FONT.Size + SpacingIndex * 2;
if (CALLSIGN_STRING != "--------")
{
// Draw CALLSIGN
g.DrawString(CALLSIGN_STRING, CALLSIGN_FONT, CALLSIGN_BRUSH, LabelStartPosition.X + CALLSIGN_OFFSET.X, LabelStartPosition.Y + LabelHeight);
LabelHeight = LabelHeight + (int)CALLSIGN_FONT.Size + SpacingIndex * 2;
}
// Draw ModeC
g.DrawString(ModeC_STRING, ModeC_FONT, ModeC_BRUSH, LabelStartPosition.X + ModeC_OFFSET.X, LabelStartPosition.Y + LabelHeight);
// Draw CFL on the same line
if (ModeC_STRING == null)
{
ModeC_STRING = "---";
}
CFL_OFFSET.X = ModeC_STRING.Length * (int)ModeC_FONT.Size;
CFL_OFFSET.Y = LabelStartPosition.Y + LabelHeight;
g.DrawString(CFL_STRING, CFL_FONT, CFL_BRUSH, LabelStartPosition.X + CFL_OFFSET.X, CFL_OFFSET.Y);
CFL_START_X = LabelStartPosition.X + CFL_OFFSET.X;
CFL_START_Y = CFL_OFFSET.Y;
// Draw GSPD on the same line
GSPD_OFFSET.X = (ModeC_STRING.Length * (int)ModeC_FONT.Size) + (CFL_STRING.Length * (int)CFL_FONT.Size);
GSPD_OFFSET.Y = LabelStartPosition.Y + LabelHeight;
if (CALC_GSPD_STRING != " ---")
{
g.DrawString(CALC_GSPD_STRING, GSPD_FONT, GSPD_BRUSH, LabelStartPosition.X + GSPD_OFFSET.X, GSPD_OFFSET.Y);
}
else if (DAP_GSPD != "N/A")
{
g.DrawString(DAP_GSPD, GSPD_FONT, GSPD_BRUSH, LabelStartPosition.X + GSPD_OFFSET.X, GSPD_OFFSET.Y);
}
else
{
g.DrawString(" ---", GSPD_FONT, GSPD_BRUSH, LabelStartPosition.X + GSPD_OFFSET.X, GSPD_OFFSET.Y);
}
GSPD_START_X = LabelStartPosition.X + GSPD_OFFSET.X;
GSPD_START_Y = GSPD_OFFSET.Y;
LabelHeight = LabelHeight + (int)GSPD_FONT.Size + SpacingIndex * 2;
if (ShowLabelBox == true)
{
/////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////
// DRAW Assigned HDG, SPD and ROC
/////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////
// HDG
g.DrawString(A_HDG_STRING, A_HDG_FONT, A_HDG_BRUSH, LabelStartPosition.X + A_HDG_OFFSET.X, LabelStartPosition.Y + LabelHeight);
HDG_START_X = LabelStartPosition.X + A_HDG_OFFSET.X;
HDG_START_Y = LabelStartPosition.Y + LabelHeight;
// SPD
A_SPD_OFFSET.X = A_HDG_STRING.Length * (int)A_HDG_FONT.Size;
A_SPD_OFFSET.Y = LabelStartPosition.Y + LabelHeight;
g.DrawString(A_SPD_STRING, A_SPD_FONT, A_SPD_BRUSH, LabelStartPosition.X + A_SPD_OFFSET.X, A_SPD_OFFSET.Y);
SPD_START_X = LabelStartPosition.X + A_SPD_OFFSET.X;
SPD_START_Y = A_SPD_OFFSET.Y;
// ROC
//A_ROC_OFFSET.X = A_SPD_OFFSET.X + A_SPD_OFFSET.X + A_SPD_STRING.Length * (int)A_SPD_FONT.Size;
//A_ROC_OFFSET.Y = LabelStartPosition.Y + LabelHeight;
// g.DrawString(A_ROC_STRING, A_ROC_FONT, A_ROC_BRUSH, LabelStartPosition.X + A_ROC_OFFSET.X, A_ROC_OFFSET.Y);
LabelHeight = LabelHeight + (int)A_SPD_FONT.Size + SpacingIndex * 2;
// Add the final spacing index and draw the box
LabelHeight = LabelHeight + SpacingIndex * 2;
g.DrawRectangle(MyPen, LabelStartPosition.X, LabelStartPosition.Y, LabelWidth, LabelHeight);
}
}
// This method takes in two Target Positions and determines if horizontal
// separation is infringed. The first parameter is passed by reference as
// the method will, in the case it determines that separation is infringed
// set appropriate inication in the passed in Target. It actually sets all
// items in the STCA_List
private static void Check_And_Set_Horizontal_Infringed(ref DynamicDisplayBuilder.TargetType T1, DynamicDisplayBuilder.TargetType T2)
{
////////////////////////////////////////////////////////////////////////////////////////////////
// First extract and validate all the data
//
GlobalPosition Track_1_Pos = new GlobalPosition(new GlobalCoordinates(T1.Lat, T1.Lon));
GlobalPosition Track_2_Pos = new GlobalPosition(new GlobalCoordinates(T2.Lat, T2.Lon));
bool DataValid = false;
double Track_1_SPD;
double Track_2_SPD;
double Track_1_TRK;
double Track_2_TRK;
if (!double.TryParse(T1.CALC_GSPD, out Track_1_SPD))
{
DataValid = false;
}
if (!double.TryParse(T2.CALC_GSPD, out Track_2_SPD))
{
DataValid = false;
}
if (!double.TryParse(T1.TRK, out Track_1_TRK))
{
if (!double.TryParse(T1.DAP_HDG, out Track_1_TRK))
{
DataValid = false;
}
}
if (!double.TryParse(T2.TRK, out Track_2_TRK))
{
if (!double.TryParse(T2.DAP_HDG, out Track_2_TRK))
{
DataValid = false;
}
}
// Data validated
if (DataValid)
{
// select a reference elllipsoid
Ellipsoid reference = Ellipsoid.WGS84;
// instantiate the calculator
GeodeticCalculator geoCalc = new GeodeticCalculator();
// Used to calculate the time to the min distance
GlobalPosition Track_1 = new GlobalPosition(new GlobalCoordinates(Track_1_Pos.Latitude, Track_1_Pos.Longitude));
GlobalPosition Track_2 = new GlobalPosition(new GlobalCoordinates(Track_2_Pos.Latitude, Track_2_Pos.Longitude));
///////////////////////////////////////////////////////////////////////////////////////////////////////////////////////
// First check if the two targets are already in separation violation status.
// If so, then add the STCA items to the STCA pair target
double DistanceToTravel = geoCalc.CalculateGeodeticMeasurement(reference, Track_1, Track_2).PointToPointDistance;
DistanceToTravel = DistanceToTravel * 0.00053996; // Convert to nautical miles
if (DistanceToTravel < Min_Horizontal_Separation_Nm)
{
STCA_Target_Item STCA_Item = new STCA_Target_Item();
STCA_Item.CurrentDistance = DistanceToTravel;
STCA_Item.STCA_Partner = T2.TrackNumber;
STCA_Item.STCA_Status = STCA_Status_Type.Violation;
STCA_Item.TimeToImpact_Sec = 10;
STCA_Item.TimeToConflictSec = 0;
T1.STCA_List.Add(STCA_Item);
}
// No they are not, then check if the two targets are going to be in
// the separation violation status a parameter set time in the future
// This is so called "violation prediction status"
}
}
public override void OnRender(Graphics g)
{
g.DrawLine(new Pen(Brush_To_Use), StartPosition, EndPosition);
// select a reference elllipsoid
Ellipsoid reference = Ellipsoid.WGS84;
// instantiate the calculator
GeodeticCalculator geoCalc = new GeodeticCalculator();
GlobalPosition Start = new GlobalPosition(new GlobalCoordinates(this.Position.Lat, this.Position.Lng));
PointLatLng End_LatLng = FormMain.FromLocalToLatLng(EndPosition.X, EndPosition.Y);
GlobalPosition End = new GlobalPosition(new GlobalCoordinates(End_LatLng.Lat, End_LatLng.Lng));
GeodeticMeasurement GM = geoCalc.CalculateGeodeticMeasurement(reference, Start, End);
// Now compute position half way between two points.
double distance = GM.PointToPointDistance / 2.0;
if (distance > 0.0)
{
GlobalCoordinates GC = geoCalc.CalculateEndingGlobalCoordinates(reference, new GlobalCoordinates(this.Position.Lat, this.Position.Lng), GM.Azimuth, distance);
GPoint GP = FormMain.FromLatLngToLocal(new PointLatLng(GC.Latitude.Degrees, GC.Longitude.Degrees));
double Distane_NM = 0.00053996 * GM.PointToPointDistance;
g.DrawString(Math.Round(GM.Azimuth.Degrees).ToString() + "°/" + Math.Round(Distane_NM, 1).ToString() + "nm", new Font(FontFamily.GenericSansSerif, 9), Brush_To_Use, new PointF(GP.X, GP.Y));
}
}
public override void OnRender(Graphics g)
{
Pen MyPen = new Pen(new SolidBrush(LabelAttributes.TargetColor), LabelAttributes.TargetSize);
MyPen.DashStyle = LabelAttributes.TargetStyle;
// Draw AC Symbol
g.DrawRectangle(MyPen, LocalPosition.X - 5, LocalPosition.Y - 5, 10, 10);
AC_SYMB_START_X = LocalPosition.X - 5;
AC_SYMB_START_Y = LocalPosition.Y - 5;
/////////////////////////////////////////////////////////////////////////////////////////////////////////////
// Here handle drawing of Range/Bearing & SEP tool
if (TargetToMonitor != -1)
{
Point StartPosition = new Point(LocalPosition.X, LocalPosition.Y);
Point EndPosition = DynamicDisplayBuilder.GetTargetPositionByIndex(TargetToMonitor);
g.DrawLine(new Pen(Brushes.Yellow, 1), StartPosition, EndPosition);
// select a reference elllipsoid
Ellipsoid reference = Ellipsoid.WGS84;
// instantiate the calculator
GeodeticCalculator geoCalc = new GeodeticCalculator();
GlobalPosition Start = new GlobalPosition(new GlobalCoordinates(this.Position.Lat, this.Position.Lng));
PointLatLng End_LatLng = FormMain.FromLocalToLatLng(EndPosition.X, EndPosition.Y);
GlobalPosition End = new GlobalPosition(new GlobalCoordinates(End_LatLng.Lat, End_LatLng.Lng));
GeodeticMeasurement GM = geoCalc.CalculateGeodeticMeasurement(reference, End, Start);
////////////////////////////////////////////////////////////////////////////////////////////
// Handle SEP Tool
double TRK1_SPD = 0.0, TRK2_SPD = 0.0;
double TRK1_AZ = 0.0, TRK2_AZ = 0.0;
bool Sep_Data_Is_Valid = true;
if (!double.TryParse(CALC_GSPD_STRING, out TRK1_SPD))
{
if (!double.TryParse(DAP_GSPD, out TRK1_SPD))
Sep_Data_Is_Valid = false;
}
if (!double.TryParse(DynamicDisplayBuilder.GetTarget_CALC_GSPD_ByIndex(TargetToMonitor), out TRK2_SPD))
{
if (!double.TryParse(DynamicDisplayBuilder.GetTarget_DAP_GSPD_ByIndex(TargetToMonitor), out TRK2_SPD))
Sep_Data_Is_Valid = false;
}
if (!double.TryParse(CALC_HDG_STRING, out TRK1_AZ))
{
if (!double.TryParse(TRK, out TRK1_AZ))
{
if (!double.TryParse(DAP_HDG, out TRK1_AZ))
Sep_Data_Is_Valid = false;
}
}
if (!double.TryParse(DynamicDisplayBuilder.GetTarget_CALC_HDG_ByIndex(TargetToMonitor), out TRK2_AZ))
{
if (!double.TryParse(DynamicDisplayBuilder.GetTargetTRKByIndex(TargetToMonitor), out TRK2_AZ))
{
if (!double.TryParse(DynamicDisplayBuilder.GetTargetM_HDGByIndex(TargetToMonitor), out TRK2_AZ))
Sep_Data_Is_Valid = false;
}
}
////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////
// If all the necessary data is avilable
// then pass it on to the SEP tool calculator
// and then draw the result
string SepToolActive = "N/A";
if (Sep_Data_Is_Valid)
{
SEP_Tool_Calculator SepTool = new SEP_Tool_Calculator(Start, End, TRK1_SPD, TRK2_SPD, TRK1_AZ, TRK2_AZ, 20);
SEP_Tool_Calculator.OutData Sep_Tool_Data = SepTool.GetResult();
if (Sep_Tool_Data.Is_Converging)
{
g.DrawRectangle(new Pen(Brushes.Yellow, LabelAttributes.TargetSize), Sep_Tool_Data.Track_1_Pos_Min.X - 5, Sep_Tool_Data.Track_1_Pos_Min.Y - 5, 10, 10);
g.DrawRectangle(new Pen(Brushes.Yellow, LabelAttributes.TargetSize), Sep_Tool_Data.Track_2_Pos_Min.X - 5, Sep_Tool_Data.Track_2_Pos_Min.Y - 5, 10, 10);
g.DrawLine(new Pen(Brushes.Yellow, LabelAttributes.TargetSize), new Point(Sep_Tool_Data.Track_1_Pos_Min.X, Sep_Tool_Data.Track_1_Pos_Min.Y), new Point(StartPosition.X, StartPosition.Y));
g.DrawLine(new Pen(Brushes.Yellow, LabelAttributes.TargetSize), new Point(Sep_Tool_Data.Track_2_Pos_Min.X, Sep_Tool_Data.Track_2_Pos_Min.Y), new Point(EndPosition.X, EndPosition.Y));
TimeSpan T = TimeSpan.FromSeconds(Sep_Tool_Data.SecondsToMinimum);
SepToolActive = "min d:" + Math.Round(Sep_Tool_Data.MinDistance, 1).ToString() + "/" + T.Minutes.ToString() + ":" + T.Seconds.ToString();
}
}
// Now compute position half way between two points.
double distance = GM.PointToPointDistance / 2.0;
if (distance > 0.0)
{
GlobalCoordinates GC = geoCalc.CalculateEndingGlobalCoordinates(reference, new GlobalCoordinates(End_LatLng.Lat, End_LatLng.Lng), GM.Azimuth, distance);
GPoint GP = FormMain.FromLatLngToLocal(new PointLatLng(GC.Latitude.Degrees, GC.Longitude.Degrees));
double Distane_NM = 0.00053996 * GM.PointToPointDistance;
g.DrawString(Math.Round(GM.Azimuth.Degrees).ToString() + "°/" + Math.Round(Distane_NM, 1).ToString() + "nm", new Font(FontFamily.GenericSansSerif, 9), Brushes.Yellow, new PointF(GP.X, GP.Y));
if (Sep_Data_Is_Valid && SepToolActive != "N/A")
{
g.DrawString(SepToolActive, new Font(FontFamily.GenericSansSerif, 9), Brushes.Yellow, new PointF(GP.X, GP.Y + 15));
}
}
}
// Here handle history points
// First draw all previous history points
int Number_of_Points_Drawn = 0;
for (int Index = HistoryPoints.Count - 2; Index >= 0; Index--)
{
if (Number_of_Points_Drawn < Properties.Settings.Default.HistoryPoints)
{
HistoryPointsType I = HistoryPoints.ElementAt(Index);
GPoint MarkerPositionLocal = FormMain.gMapControl.FromLatLngToLocal(new PointLatLng(I.LatLong.Lat, I.LatLong.Lng));
g.DrawEllipse(MyPen, MarkerPositionLocal.X, MarkerPositionLocal.Y, 3, 3);
Number_of_Points_Drawn++;
}
}
//////////////////////////////////////////////////////////////////////////////////////////////////////////////////
// Here draw speed vector
// // Find out what data should be used for speed vector? IAS, TAS, GSPD, MACH?
if ((DataItemValidator(CALC_HDG_STRING) || DataItemValidator(DAP_HDG) || DataItemValidator(TRK)) && (DataItemValidator(DAP_GSPD) || DataItemValidator(CALC_GSPD_STRING)))
{
double Azimuth = 0.0;
double Range = 0.0;
if (DataItemValidator(CALC_GSPD_STRING))
Range = double.Parse(CALC_GSPD_STRING);
else
Range = double.Parse(DAP_GSPD);
if (DataItemValidator(CALC_HDG_STRING))
Azimuth = double.Parse(CALC_HDG_STRING);
else if (DataItemValidator(TRK))
Azimuth = double.Parse(TRK);
else
Azimuth = double.Parse(DAP_HDG);
Range = (Range / 60) * (double)Properties.Settings.Default.SpeedVector;
GeoCordSystemDegMinSecUtilities.LatLongClass ResultPosition =
GeoCordSystemDegMinSecUtilities.CalculateNewPosition(new GeoCordSystemDegMinSecUtilities.LatLongClass(Position.Lat, Position.Lng), (double)Range, (double)Azimuth);
GPoint MarkerPositionLocal = FormMain.gMapControl.FromLatLngToLocal(new PointLatLng(ResultPosition.GetLatLongDecimal().LatitudeDecimal, ResultPosition.GetLatLongDecimal().LongitudeDecimal));
g.DrawLine(MyPen, new Point(LocalPosition.X, LocalPosition.Y), new Point(MarkerPositionLocal.X, MarkerPositionLocal.Y));
}
//////////////////////////////////////////////////////////////////////////////////////////////////////////////////
MyPen = new Pen(new SolidBrush(LabelAttributes.LineColor), LabelAttributes.LineWidth);
MyPen.DashStyle = LabelAttributes.LineStyle;
// Draw leader line
g.DrawLine(MyPen, new Point(LocalPosition.X, LocalPosition.Y), new Point(LocalPosition.X - LabelOffset.X, LocalPosition.Y - LabelOffset.Y));
// Draw label box
Point LabelStartPosition = GetLabelStartingPoint();
// Recalculate Label Width each cycle to adjust for the possible changes in the number of lines
// and changes in the text size
LabelHeight = 0;
// Draw ModeA and coast indicator
g.DrawString(ModeA_CI_STRING, ModeA_CI_FONT, ModeA_CI_BRUSH, LabelStartPosition.X + ModeA_CI_OFFSET.X, LabelStartPosition.Y + SpacingIndex);
LabelHeight = LabelHeight + (int)ModeA_CI_FONT.Size + SpacingIndex * 2;
if (CALLSIGN_STRING != "--------")
{
// Draw CALLSIGN
g.DrawString(CALLSIGN_STRING, CALLSIGN_FONT, CALLSIGN_BRUSH, LabelStartPosition.X + CALLSIGN_OFFSET.X, LabelStartPosition.Y + LabelHeight);
LabelHeight = LabelHeight + (int)CALLSIGN_FONT.Size + SpacingIndex * 2;
}
// Draw ModeC
g.DrawString(ModeC_STRING, ModeC_FONT, ModeC_BRUSH, LabelStartPosition.X + ModeC_OFFSET.X, LabelStartPosition.Y + LabelHeight);
// Draw CFL on the same line
if (ModeC_STRING == null)
ModeC_STRING = "---";
CFL_OFFSET.X = ModeC_STRING.Length * (int)ModeC_FONT.Size;
CFL_OFFSET.Y = LabelStartPosition.Y + LabelHeight;
g.DrawString(CFL_STRING, CFL_FONT, CFL_BRUSH, LabelStartPosition.X + CFL_OFFSET.X, CFL_OFFSET.Y);
CFL_START_X = LabelStartPosition.X + CFL_OFFSET.X;
CFL_START_Y = CFL_OFFSET.Y;
// Draw GSPD on the same line
GSPD_OFFSET.X = (ModeC_STRING.Length * (int)ModeC_FONT.Size) + (CFL_STRING.Length * (int)CFL_FONT.Size);
GSPD_OFFSET.Y = LabelStartPosition.Y + LabelHeight;
if (CALC_GSPD_STRING != " ---")
g.DrawString(CALC_GSPD_STRING, GSPD_FONT, GSPD_BRUSH, LabelStartPosition.X + GSPD_OFFSET.X, GSPD_OFFSET.Y);
else if (DAP_GSPD != "N/A")
g.DrawString(DAP_GSPD, GSPD_FONT, GSPD_BRUSH, LabelStartPosition.X + GSPD_OFFSET.X, GSPD_OFFSET.Y);
else
g.DrawString(" ---", GSPD_FONT, GSPD_BRUSH, LabelStartPosition.X + GSPD_OFFSET.X, GSPD_OFFSET.Y);
GSPD_START_X = LabelStartPosition.X + GSPD_OFFSET.X;
GSPD_START_Y = GSPD_OFFSET.Y;
LabelHeight = LabelHeight + (int)GSPD_FONT.Size + SpacingIndex * 2;
if (ShowLabelBox == true)
{
/////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////
// DRAW Assigned HDG, SPD and ROC
/////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////
// HDG
g.DrawString(A_HDG_STRING, A_HDG_FONT, A_HDG_BRUSH, LabelStartPosition.X + A_HDG_OFFSET.X, LabelStartPosition.Y + LabelHeight);
HDG_START_X = LabelStartPosition.X + A_HDG_OFFSET.X;
HDG_START_Y = LabelStartPosition.Y + LabelHeight;
// SPD
A_SPD_OFFSET.X = A_HDG_STRING.Length * (int)A_HDG_FONT.Size;
A_SPD_OFFSET.Y = LabelStartPosition.Y + LabelHeight;
g.DrawString(A_SPD_STRING, A_SPD_FONT, A_SPD_BRUSH, LabelStartPosition.X + A_SPD_OFFSET.X, A_SPD_OFFSET.Y);
SPD_START_X = LabelStartPosition.X + A_SPD_OFFSET.X;
SPD_START_Y = A_SPD_OFFSET.Y;
// ROC
//A_ROC_OFFSET.X = A_SPD_OFFSET.X + A_SPD_OFFSET.X + A_SPD_STRING.Length * (int)A_SPD_FONT.Size;
//A_ROC_OFFSET.Y = LabelStartPosition.Y + LabelHeight;
// g.DrawString(A_ROC_STRING, A_ROC_FONT, A_ROC_BRUSH, LabelStartPosition.X + A_ROC_OFFSET.X, A_ROC_OFFSET.Y);
LabelHeight = LabelHeight + (int)A_SPD_FONT.Size + SpacingIndex * 2;
// Add the final spacing index and draw the box
LabelHeight = LabelHeight + SpacingIndex * 2;
g.DrawRectangle(MyPen, LabelStartPosition.X, LabelStartPosition.Y, LabelWidth, LabelHeight);
}
}
/// <summary>
/// //////////////////////////////////////////////////////////////////////////////////////
/// DO NOT CHANGE THE ORDER OF CALLS BELOW !!!
///
/// </summary>
private static void UpdateGlobalList()
{
foreach (TargetType CurrentTarget in CurrentTargetList)
{
CurrentTarget.TrackTerminateTreshold = 0;
if (CurrentTarget.TrackNumber != -1)
{
GlobalTargetList[CurrentTarget.TrackNumber].ModeA = CurrentTarget.ModeA;
GlobalTargetList[CurrentTarget.TrackNumber].ModeC_Previous_Cycle = "";
if (GlobalTargetList[CurrentTarget.TrackNumber].ModeC != null)
GlobalTargetList[CurrentTarget.TrackNumber].ModeC_Previous_Cycle = "" + GlobalTargetList[CurrentTarget.TrackNumber].ModeC;
GlobalTargetList[CurrentTarget.TrackNumber].ModeC = CurrentTarget.ModeC;
GlobalTargetList[CurrentTarget.TrackNumber].CALC_GSPD = CurrentTarget.CALC_GSPD;
if (CurrentTarget.DAP_GSPD != "N/A")
GlobalTargetList[CurrentTarget.TrackNumber].DAP_GSPD = CurrentTarget.DAP_GSPD;
GlobalTargetList[CurrentTarget.TrackNumber].ACID_Mode_S = CurrentTarget.ACID_Mode_S;
if (CurrentTarget.Mode_S_Addr != "N/A")
GlobalTargetList[CurrentTarget.TrackNumber].Mode_S_Addr = CurrentTarget.Mode_S_Addr;
if (CurrentTarget.DAP_HDG != "N/A")
GlobalTargetList[CurrentTarget.TrackNumber].DAP_HDG = CurrentTarget.DAP_HDG;
GlobalTargetList[CurrentTarget.TrackNumber].CALC_HDG = CurrentTarget.CALC_HDG;
if (CurrentTarget.IAS != "N/A")
GlobalTargetList[CurrentTarget.TrackNumber].IAS = CurrentTarget.IAS;
if (CurrentTarget.TRK != "N/A")
GlobalTargetList[CurrentTarget.TrackNumber].TRK = CurrentTarget.TRK;
if (CurrentTarget.MACH != "N/A")
GlobalTargetList[CurrentTarget.TrackNumber].MACH = CurrentTarget.MACH;
if (CurrentTarget.TAS != "N/A")
GlobalTargetList[CurrentTarget.TrackNumber].TAS = CurrentTarget.TAS;
if (CurrentTarget.Roll_Ang != "N/A")
GlobalTargetList[CurrentTarget.TrackNumber].Roll_Ang = CurrentTarget.Roll_Ang;
if (CurrentTarget.SelectedAltitude_ShortTerm != "N/A")
GlobalTargetList[CurrentTarget.TrackNumber].SelectedAltitude_ShortTerm = CurrentTarget.SelectedAltitude_ShortTerm;
if (CurrentTarget.SelectedAltitude_LongTerm != "N/A")
GlobalTargetList[CurrentTarget.TrackNumber].SelectedAltitude_LongTerm = CurrentTarget.SelectedAltitude_LongTerm;
if (CurrentTarget.Rate_Of_Climb != "N/A")
GlobalTargetList[CurrentTarget.TrackNumber].Rate_Of_Climb = CurrentTarget.Rate_Of_Climb;
if (CurrentTarget.Barometric_Setting != "N/A")
GlobalTargetList[CurrentTarget.TrackNumber].Barometric_Setting = CurrentTarget.Barometric_Setting;
GlobalTargetList[CurrentTarget.TrackNumber].Lat = CurrentTarget.Lat;
GlobalTargetList[CurrentTarget.TrackNumber].Lon = CurrentTarget.Lon;
GlobalTargetList[CurrentTarget.TrackNumber].TimeSinceMidnight = CurrentTarget.TimeSinceMidnight;
///////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////
// Handle history points
if (GlobalTargetList[CurrentTarget.TrackNumber].MyMarker.HistoryPoints.Count > 0)
{
// select a reference elllipsoid
Ellipsoid reference = Ellipsoid.WGS84;
// instantiate the calculator
GeodeticCalculator geoCalc = new GeodeticCalculator();
GlobalPosition Track_1 = new GlobalPosition(new GlobalCoordinates(CurrentTarget.Lat, CurrentTarget.Lon));
GlobalPosition Track_2 = new GlobalPosition(new GlobalCoordinates(GlobalTargetList[CurrentTarget.TrackNumber].MyMarker.HistoryPoints.Last().LatLong.Lat,
GlobalTargetList[CurrentTarget.TrackNumber].MyMarker.HistoryPoints.Last().LatLong.Lng));
// Calculate distance traveled
double DistanceTraveled = geoCalc.CalculateGeodeticMeasurement(reference, Track_1, Track_2).PointToPointDistance;
DistanceTraveled = DistanceTraveled * 0.00053996; // Convert to nautical miles
double BetweenTwoUpdates = CurrentTarget.TimeSinceMidnight - GlobalTargetList[CurrentTarget.TrackNumber].MyMarker.HistoryPoints.Last().TimeSinceMidnight;
int Miliseconds = (int)(((BetweenTwoUpdates - Math.Floor(BetweenTwoUpdates)) * 10.0));
TimeSpan TimeDifference = new TimeSpan(0, 0, 0, (int)Math.Floor(BetweenTwoUpdates), Miliseconds);
// Only update history position if there was actually a change in the distance
if (DistanceTraveled > 0)
{
if (GlobalTargetList[CurrentTarget.TrackNumber].MyMarker.HistoryPoints.Count > Max_History_Points)
GlobalTargetList[CurrentTarget.TrackNumber].MyMarker.HistoryPoints.Dequeue();
GMapTargetandLabel.HistoryPointsType HP = new GMapTargetandLabel.HistoryPointsType();
HP.LatLong = new PointLatLng(CurrentTarget.Lat, CurrentTarget.Lon);
HP.TimeSinceMidnight = CurrentTarget.TimeSinceMidnight;
GlobalTargetList[CurrentTarget.TrackNumber].MyMarker.HistoryPoints.Enqueue(HP);
}
}
else
{
GMapTargetandLabel.HistoryPointsType HP = new GMapTargetandLabel.HistoryPointsType();
HP.LatLong = new PointLatLng(CurrentTarget.Lat, CurrentTarget.Lon);
HP.TimeSinceMidnight = CurrentTarget.TimeSinceMidnight;
GlobalTargetList[CurrentTarget.TrackNumber].MyMarker.HistoryPoints.Enqueue(HP);
}
////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////
GlobalTargetList[CurrentTarget.TrackNumber].TrackNumber = CurrentTarget.TrackNumber;
GlobalTargetList[CurrentTarget.TrackNumber].TrackTerminateTreshold = CurrentTarget.TrackTerminateTreshold;
}
else
{
int ModeAIndex = int.Parse(CurrentTarget.ModeA.ToString());
GlobalTargetList[ModeAIndex].ModeA = CurrentTarget.ModeA;
GlobalTargetList[ModeAIndex].ModeC_Previous_Cycle = "";
if (GlobalTargetList[ModeAIndex].ModeC != null)
GlobalTargetList[ModeAIndex].ModeC_Previous_Cycle = "" + GlobalTargetList[ModeAIndex].ModeC;
GlobalTargetList[ModeAIndex].ModeC = CurrentTarget.ModeC;
if (CurrentTarget.DAP_GSPD != "N/A")
GlobalTargetList[ModeAIndex].DAP_GSPD = CurrentTarget.DAP_GSPD;
GlobalTargetList[ModeAIndex].CALC_GSPD = CurrentTarget.CALC_GSPD;
GlobalTargetList[ModeAIndex].ACID_Mode_S = CurrentTarget.ACID_Mode_S;
if (CurrentTarget.Mode_S_Addr != "N/A")
GlobalTargetList[ModeAIndex].Mode_S_Addr = CurrentTarget.Mode_S_Addr;
if (CurrentTarget.DAP_HDG != "N/A")
GlobalTargetList[ModeAIndex].DAP_HDG = CurrentTarget.DAP_HDG;
GlobalTargetList[ModeAIndex].CALC_HDG = CurrentTarget.CALC_HDG;
if (CurrentTarget.IAS != "N/A")
GlobalTargetList[ModeAIndex].IAS = CurrentTarget.IAS;
if (CurrentTarget.TRK != "N/A")
GlobalTargetList[ModeAIndex].TRK = CurrentTarget.TRK;
if (CurrentTarget.MACH != "N/A")
GlobalTargetList[ModeAIndex].MACH = CurrentTarget.MACH;
if (CurrentTarget.TAS != "N/A")
GlobalTargetList[ModeAIndex].TAS = CurrentTarget.TAS;
if (CurrentTarget.Roll_Ang != "N/A")
GlobalTargetList[ModeAIndex].Roll_Ang = CurrentTarget.Roll_Ang;
if (CurrentTarget.SelectedAltitude_ShortTerm != "N/A")
GlobalTargetList[ModeAIndex].SelectedAltitude_ShortTerm = CurrentTarget.SelectedAltitude_ShortTerm;
if (CurrentTarget.SelectedAltitude_LongTerm != "N/A")
GlobalTargetList[ModeAIndex].SelectedAltitude_LongTerm = CurrentTarget.SelectedAltitude_LongTerm;
if (CurrentTarget.Rate_Of_Climb != "N/A")
GlobalTargetList[ModeAIndex].Rate_Of_Climb = CurrentTarget.Rate_Of_Climb;
if (CurrentTarget.Barometric_Setting != "N/A")
GlobalTargetList[ModeAIndex].Barometric_Setting = CurrentTarget.Barometric_Setting;
GlobalTargetList[ModeAIndex].Lat = CurrentTarget.Lat;
GlobalTargetList[ModeAIndex].Lon = CurrentTarget.Lon;
GlobalTargetList[ModeAIndex].TimeSinceMidnight = CurrentTarget.TimeSinceMidnight;
///////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////
// Handle history points
if (GlobalTargetList[ModeAIndex].MyMarker.HistoryPoints.Count > 0)
{
// select a reference elllipsoid
Ellipsoid reference = Ellipsoid.WGS84;
// instantiate the calculator
GeodeticCalculator geoCalc = new GeodeticCalculator();
GlobalPosition Track_1 = new GlobalPosition(new GlobalCoordinates(CurrentTarget.Lat, CurrentTarget.Lon));
GlobalPosition Track_2 = new GlobalPosition(new GlobalCoordinates(GlobalTargetList[ModeAIndex].MyMarker.HistoryPoints.Last().LatLong.Lat,
GlobalTargetList[ModeAIndex].MyMarker.HistoryPoints.Last().LatLong.Lng));
// Calculate distance traveled
double DistanceTraveled = geoCalc.CalculateGeodeticMeasurement(reference, Track_1, Track_2).PointToPointDistance;
DistanceTraveled = DistanceTraveled * 0.00053996; // Convert to nautical miles
double BetweenTwoUpdates = CurrentTarget.TimeSinceMidnight - GlobalTargetList[ModeAIndex].MyMarker.HistoryPoints.Last().TimeSinceMidnight;
int Miliseconds = (int)(((BetweenTwoUpdates - Math.Floor(BetweenTwoUpdates)) * 10.0));
TimeSpan TimeDifference = new TimeSpan(0, 0, 0, (int)Math.Floor(BetweenTwoUpdates), Miliseconds);
// Only update history position if there was actually a change in the distance
if (DistanceTraveled > 0)
{
if (GlobalTargetList[ModeAIndex].MyMarker.HistoryPoints.Count > Max_History_Points)
GlobalTargetList[ModeAIndex].MyMarker.HistoryPoints.Dequeue();
GMapTargetandLabel.HistoryPointsType HP = new GMapTargetandLabel.HistoryPointsType();
HP.LatLong = new PointLatLng(CurrentTarget.Lat, CurrentTarget.Lon);
HP.TimeSinceMidnight = CurrentTarget.TimeSinceMidnight;
GlobalTargetList[ModeAIndex].MyMarker.HistoryPoints.Enqueue(HP);
}
}
else
{
GMapTargetandLabel.HistoryPointsType HP = new GMapTargetandLabel.HistoryPointsType();
HP.LatLong = new PointLatLng(CurrentTarget.Lat, CurrentTarget.Lon);
HP.TimeSinceMidnight = CurrentTarget.TimeSinceMidnight;
GlobalTargetList[ModeAIndex].MyMarker.HistoryPoints.Enqueue(HP);
}
////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////
GlobalTargetList[ModeAIndex].TrackNumber = ModeAIndex;
GlobalTargetList[ModeAIndex].TrackTerminateTreshold = CurrentTarget.TrackTerminateTreshold;
}
}
CurrentTargetList.Clear();
foreach (TargetType GlobalTarget in GlobalTargetList)
{
if (GlobalTarget.TrackTerminateTreshold < Properties.Settings.Default.TrackCoast)
{
TargetType NewTarget = new TargetType();
GlobalTarget.TrackTerminateTreshold++;
NewTarget.ModeA = GlobalTarget.ModeA;
NewTarget.ModeC_Previous_Cycle = GlobalTarget.ModeC_Previous_Cycle;
NewTarget.ModeC = GlobalTarget.ModeC;
NewTarget.CALC_GSPD = GlobalTarget.CALC_GSPD;
NewTarget.DAP_GSPD = GlobalTarget.DAP_GSPD;
NewTarget.ACID_Mode_S = GlobalTarget.ACID_Mode_S;
NewTarget.Mode_S_Addr = GlobalTarget.Mode_S_Addr;
NewTarget.TRK = GlobalTarget.TRK;
NewTarget.TAS = GlobalTarget.TAS;
NewTarget.Roll_Ang = GlobalTarget.Roll_Ang;
NewTarget.SelectedAltitude_ShortTerm = GlobalTarget.SelectedAltitude_ShortTerm;
NewTarget.SelectedAltitude_LongTerm = GlobalTarget.SelectedAltitude_LongTerm;
NewTarget.Rate_Of_Climb = GlobalTarget.Rate_Of_Climb;
NewTarget.MACH = GlobalTarget.MACH;
NewTarget.DAP_HDG = GlobalTarget.DAP_HDG;
NewTarget.CALC_HDG = GlobalTarget.CALC_HDG;
NewTarget.IAS = GlobalTarget.IAS;
NewTarget.Barometric_Setting = GlobalTarget.Barometric_Setting;
NewTarget.Lat = GlobalTarget.Lat;
NewTarget.Lon = GlobalTarget.Lon;
NewTarget.TimeSinceMidnight = GlobalTarget.TimeSinceMidnight;
NewTarget.TrackNumber = GlobalTarget.TrackNumber;
NewTarget.TrackTerminateTreshold = GlobalTarget.TrackTerminateTreshold;
NewTarget.MyMarker = GlobalTarget.MyMarker;
CurrentTargetList.Add(NewTarget);
}
else
{
if (GlobalTarget.MyMarker != null)
GlobalTarget.MyMarker.TerminateTarget();
}
}
if (Properties.Settings.Default.DisplayPSR == true)
{
// Now append all the PSR tracks to the end of the display list
foreach (TargetType PSRTgtList in PSRTargetList)
{
TargetType NewTarget = new TargetType();
NewTarget.ModeC_Previous_Cycle = PSRTgtList.ModeC_Previous_Cycle;
NewTarget.Lat = PSRTgtList.Lat;
NewTarget.Lon = PSRTgtList.Lon;
NewTarget.TrackNumber = PSRTgtList.TrackNumber;
NewTarget.TrackTerminateTreshold = 0;
NewTarget.MyMarker = PSRTgtList.MyMarker;
CurrentTargetList.Add(NewTarget);
}
}
}
// This method takes in two Target Positions and determines if horizontal
// separation is infringed. The first parameter is passed by reference as
// the method will, in the case it determines that separation is infringed
// set appropriate inication in the passed in Target. It actually sets all
// items in the STCA_List
private static void Check_And_Set_Horizontal_Infringed(ref DynamicDisplayBuilder.TargetType T1, DynamicDisplayBuilder.TargetType T2)
{
////////////////////////////////////////////////////////////////////////////////////////////////
// First extract and validate all the data
//
GlobalPosition Track_1_Pos = new GlobalPosition(new GlobalCoordinates(T1.Lat, T1.Lon));
GlobalPosition Track_2_Pos = new GlobalPosition(new GlobalCoordinates(T2.Lat, T2.Lon));
bool DataValid = false;
double Track_1_SPD;
double Track_2_SPD;
double Track_1_TRK;
double Track_2_TRK;
if (!double.TryParse(T1.CALC_GSPD, out Track_1_SPD))
DataValid = false;
if (!double.TryParse(T2.CALC_GSPD, out Track_2_SPD))
DataValid = false;
if (!double.TryParse(T1.TRK, out Track_1_TRK))
{
if (!double.TryParse(T1.DAP_HDG, out Track_1_TRK))
DataValid = false;
}
if (!double.TryParse(T2.TRK, out Track_2_TRK))
{
if (!double.TryParse(T2.DAP_HDG, out Track_2_TRK))
DataValid = false;
}
// Data validated
if (DataValid)
{
// select a reference elllipsoid
Ellipsoid reference = Ellipsoid.WGS84;
// instantiate the calculator
GeodeticCalculator geoCalc = new GeodeticCalculator();
// Used to calculate the time to the min distance
GlobalPosition Track_1 = new GlobalPosition(new GlobalCoordinates(Track_1_Pos.Latitude, Track_1_Pos.Longitude));
GlobalPosition Track_2 = new GlobalPosition(new GlobalCoordinates(Track_2_Pos.Latitude, Track_2_Pos.Longitude));
///////////////////////////////////////////////////////////////////////////////////////////////////////////////////////
// First check if the two targets are already in separation violation status.
// If so, then add the STCA items to the STCA pair target
double DistanceToTravel = geoCalc.CalculateGeodeticMeasurement(reference, Track_1, Track_2).PointToPointDistance;
DistanceToTravel = DistanceToTravel * 0.00053996; // Convert to nautical miles
if (DistanceToTravel < Min_Horizontal_Separation_Nm)
{
STCA_Target_Item STCA_Item = new STCA_Target_Item();
STCA_Item.CurrentDistance = DistanceToTravel;
STCA_Item.STCA_Partner = T2.TrackNumber;
STCA_Item.STCA_Status = STCA_Status_Type.Violation;
STCA_Item.TimeToImpact_Sec = 10;
STCA_Item.TimeToConflictSec = 0;
T1.STCA_List.Add(STCA_Item);
}
// No they are not, then check if the two targets are going to be in
// the separation violation status a parameter set time in the future
// This is so called "violation prediction status"
}
}