public static void DecodeCAT34I060(byte[] Data)
{
// At this time we do not care about the content of CAT034I060.
// However it is necessary to determine how many subfields of 8 octets
// is present so that data buffer can be updated accordingly on order to
// decode the other fileds of interest
// NOTE: We assume that only first 7 defined subfuled
// I034/050 Radar Plot Characteristics 1 + 1+
int Number_Of_Octets_Present = 1; // at least two, but that will be determined below
// Decode 020
if (CAT34.I034DataItems[CAT34.ItemIDToIndex("060")].HasBeenPresent == true)
{
// Get an instance of bit ops
Bit_Ops BO = new Bit_Ops();
//Extract the first octet
BO.DWord[Bit_Ops.Bits0_7_Of_DWord] = Data[CAT34.CurrentDataBufferOctalIndex + 1];
// Now check how many data octets is present.
if (BO.DWord[CAT34I060Types.Subfiled_1] == true)
{
Number_Of_Octets_Present++;
}
if (BO.DWord[CAT34I060Types.Subfiled_2] == true)
{
Number_Of_Octets_Present++;
}
if (BO.DWord[CAT34I060Types.Subfiled_3] == true)
{
Number_Of_Octets_Present++;
}
if (BO.DWord[CAT34I060Types.Subfiled_4] == true)
{
Number_Of_Octets_Present++;
}
if (BO.DWord[CAT34I060Types.Subfiled_5] == true)
{
Number_Of_Octets_Present++;
}
if (BO.DWord[CAT34I060Types.Subfiled_6] == true)
{
Number_Of_Octets_Present++;
}
if (BO.DWord[CAT34I060Types.Subfiled_7] == true)
{
Number_Of_Octets_Present++;
}
// Increase data buffer index so it ready for the next data item.
CAT34.CurrentDataBufferOctalIndex = CAT34.CurrentDataBufferOctalIndex + Number_Of_Octets_Present;
}
}
public static void DecodeCAT34I020(byte[] Data)
{
// Get an instance of bit ops
Bit_Ops BO = new Bit_Ops();
//Extract the first octet
BO.DWord[Bit_Ops.Bits0_7_Of_DWord] = Data[CAT34.CurrentDataBufferOctalIndex + 1];
double Result = 0.0;
if (BO.DWord[Bit_Ops.Bit0] == true)
{
Result = LSB_1;
}
if (BO.DWord[Bit_Ops.Bit1] == true)
{
Result = Result + LSB_2;
}
if (BO.DWord[Bit_Ops.Bit2] == true)
{
Result = Result + LSB_3;
}
if (BO.DWord[Bit_Ops.Bit3] == true)
{
Result = Result + LSB_4;
}
if (BO.DWord[Bit_Ops.Bit4] == true)
{
Result = Result + LSB_5;
}
if (BO.DWord[Bit_Ops.Bit5] == true)
{
Result = Result + LSB_6;
}
if (BO.DWord[Bit_Ops.Bit6] == true)
{
Result = Result + LSB_7;
}
if (BO.DWord[Bit_Ops.Bit7] == true)
{
Result = Result + LSB_8;
}
//////////////////////////////////////////////////////////////////////////////////
// Now assign it to the generic list
CAT34.I034DataItems[CAT34.ItemIDToIndex("020")].value = Result;
//////////////////////////////////////////////////////////////////////////////////
// Leave it at the current index for the next decode
CAT34.CurrentDataBufferOctalIndex = CAT34.CurrentDataBufferOctalIndex + 1;
}
public static void DecodeCAT34I000(byte[] Data)
{
// First define CAT34I000 class
CAT34I000UserData MyCAT34I000UserData = new CAT34I000UserData();
// Get an instance of bit ops
Bit_Ops BO = new Bit_Ops();
//Extract the first octet
BO.DWord[Bit_Ops.Bits0_7_Of_DWord] = Data[CAT34.CurrentDataBufferOctalIndex];
int result = BO.DWord[Bit_Ops.Bits0_7_Of_DWord];
switch (result)
{
case 1:
MyCAT34I000UserData.Message_Type = CAT34I000Types.Message_Type.North_Marker_Msg;
FormMain MainFrame = Application.OpenForms[0] as FormMain;
MainFrame.HandleNorthMarkMessage();
break;
case 2:
MyCAT34I000UserData.Message_Type = CAT34I000Types.Message_Type.Sector_Crossing_Msg;
break;
case 3:
MyCAT34I000UserData.Message_Type = CAT34I000Types.Message_Type.Geographical_Filtering_Msg;
break;
case 4:
MyCAT34I000UserData.Message_Type = CAT34I000Types.Message_Type.Jamming_Strobe_Msg;
break;
default:
break;
}
//////////////////////////////////////////////////////////////////////////////////
// Now assign it to the generic list
CAT34.I034DataItems[CAT34.ItemIDToIndex("000")].value = MyCAT34I000UserData.Message_Type;
//////////////////////////////////////////////////////////////////////////////////
}
public static void DecodeCAT34I050(byte[] Data)
{
// At this time we do not care about the content of CAT034I050.
// However it is necessary to determine how many subfields of 8 octets
// is present so that data buffer can be updated accordingly in order to
// decode the other fileds of interest
// NOTE: We assume that only first 7 defined subfields are present
// I034/050 System Configuration and Status 1 + 1+
int Number_Of_Octets_Present = 1; // at least two, but that will be determined below
// Decode 020
if (CAT34.I034DataItems[CAT34.ItemIDToIndex("050")].HasBeenPresent == true)
{
// Get an instance of bit ops
Bit_Ops BO = new Bit_Ops();
Bit_Ops CAT34_I050_Data = new Bit_Ops();
//Extract the first octet
BO.DWord[Bit_Ops.Bits0_7_Of_DWord] = Data[CAT34.CurrentDataBufferOctalIndex + 1];
CAT34I050Types.CAT34I050UserData ThisCycleData = new CAT34I050Types.CAT34I050UserData();
////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////
// Now check how many data octets is present and decode the present subfileds at the same time
////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////
//////////////////////////////////////////////////////////////////////////////////
// COM - Common elements of a System
//////////////////////////////////////////////////////////////////////////////////
if (BO.DWord[CAT34I050Types.Subfiled_1] == true)
{
Number_Of_Octets_Present++;
CAT34_I050_Data.DWord[Bit_Ops.Bits0_7_Of_DWord] = Data[CAT34.CurrentDataBufferOctalIndex + Number_Of_Octets_Present];
ThisCycleData.COM_Data.Data_Present = true;
ThisCycleData.COM_Data.System_is_NOGO = CAT34_I050_Data.DWord[CAT34I050Types.Subfiled_1];
ThisCycleData.COM_Data.RDPC2_Selected = CAT34_I050_Data.DWord[CAT34I050Types.Subfiled_2];
ThisCycleData.COM_Data.RDPC_Reset = CAT34_I050_Data.DWord[CAT34I050Types.Subfiled_3];
ThisCycleData.COM_Data.RDP_Overloaded = CAT34_I050_Data.DWord[CAT34I050Types.Subfiled_4];
ThisCycleData.COM_Data.Transmision_Sys_Overloaded = CAT34_I050_Data.DWord[CAT34I050Types.Subfiled_5];
ThisCycleData.COM_Data.Monitor_Sys_Disconected = CAT34_I050_Data.DWord[CAT34I050Types.Subfiled_6];
ThisCycleData.COM_Data.Time_Source_Invalid = CAT34_I050_Data.DWord[CAT34I050Types.Subfiled_7];
}
//////////////////////////////////////////////////////////////////////////////////
// Spare
//////////////////////////////////////////////////////////////////////////////////
if (BO.DWord[CAT34I050Types.Subfiled_2] == true)
{
Number_Of_Octets_Present++;
CAT34_I050_Data.DWord[Bit_Ops.Bits0_7_Of_DWord] = Data[CAT34.CurrentDataBufferOctalIndex + Number_Of_Octets_Present];
}
//////////////////////////////////////////////////////////////////////////////////
// Spare
//////////////////////////////////////////////////////////////////////////////////
if (BO.DWord[CAT34I050Types.Subfiled_3] == true)
{
Number_Of_Octets_Present++;
CAT34_I050_Data.DWord[Bit_Ops.Bits0_7_Of_DWord] = Data[CAT34.CurrentDataBufferOctalIndex + Number_Of_Octets_Present];
}
//////////////////////////////////////////////////////////////////////////////////
// PSR - Primary sensor component
//////////////////////////////////////////////////////////////////////////////////
if (BO.DWord[CAT34I050Types.Subfiled_4] == true)
{
Number_Of_Octets_Present++;
CAT34_I050_Data.DWord[Bit_Ops.Bits0_7_Of_DWord] = Data[CAT34.CurrentDataBufferOctalIndex + Number_Of_Octets_Present];
ThisCycleData.PSR_Data.Data_Present = true;
ThisCycleData.PSR_Data.Ant_2_Selected = CAT34_I050_Data.DWord[CAT34I050Types.Subfiled_1];
if (CAT34_I050_Data.DWord[CAT34I050Types.Subfiled_3] == true && CAT34_I050_Data.DWord[CAT34I050Types.Subfiled_2] == true)
{
ThisCycleData.PSR_Data.CH_Status = CAT34I050Types.PSR.Channel_Status.Channel_A_and_B;
}
else if (CAT34_I050_Data.DWord[CAT34I050Types.Subfiled_3] == false && CAT34_I050_Data.DWord[CAT34I050Types.Subfiled_2] == false)
{
ThisCycleData.PSR_Data.CH_Status = CAT34I050Types.PSR.Channel_Status.No_Channel;
}
else if (CAT34_I050_Data.DWord[CAT34I050Types.Subfiled_3] == true)
{
ThisCycleData.PSR_Data.CH_Status = CAT34I050Types.PSR.Channel_Status.Channel_A;
}
else
{
ThisCycleData.PSR_Data.CH_Status = CAT34I050Types.PSR.Channel_Status.Channel_B;
}
ThisCycleData.PSR_Data.PSR_Overloaded = CAT34_I050_Data.DWord[CAT34I050Types.Subfiled_4];
ThisCycleData.PSR_Data.Monitor_Sys_Disconected = CAT34_I050_Data.DWord[CAT34I050Types.Subfiled_5];
}
//////////////////////////////////////////////////////////////////////////////////
// SSR - Secondary sensor component
//////////////////////////////////////////////////////////////////////////////////
if (BO.DWord[CAT34I050Types.Subfiled_5] == true)
{
Number_Of_Octets_Present++;
CAT34_I050_Data.DWord[Bit_Ops.Bits0_7_Of_DWord] = Data[CAT34.CurrentDataBufferOctalIndex + Number_Of_Octets_Present];
ThisCycleData.SSR_Data.Data_Present = true;
ThisCycleData.SSR_Data.Ant_2_Selected = CAT34_I050_Data.DWord[CAT34I050Types.Subfiled_1];
if (CAT34_I050_Data.DWord[CAT34I050Types.Subfiled_3] == true && CAT34_I050_Data.DWord[CAT34I050Types.Subfiled_2] == true)
{
ThisCycleData.SSR_Data.CH_Status = CAT34I050Types.SSR.Channel_Status.Invalid_Combination;
}
else if (CAT34_I050_Data.DWord[CAT34I050Types.Subfiled_3] == false && CAT34_I050_Data.DWord[CAT34I050Types.Subfiled_2] == false)
{
ThisCycleData.SSR_Data.CH_Status = CAT34I050Types.SSR.Channel_Status.No_Channel;
}
else if (CAT34_I050_Data.DWord[CAT34I050Types.Subfiled_3] == true)
{
ThisCycleData.SSR_Data.CH_Status = CAT34I050Types.SSR.Channel_Status.Channel_A;
}
else
{
ThisCycleData.SSR_Data.CH_Status = CAT34I050Types.SSR.Channel_Status.Channel_B;
}
ThisCycleData.SSR_Data.SSR_Overloaded = CAT34_I050_Data.DWord[CAT34I050Types.Subfiled_4];
ThisCycleData.SSR_Data.Monitor_Sys_Disconected = CAT34_I050_Data.DWord[CAT34I050Types.Subfiled_5];
}
//////////////////////////////////////////////////////////////////////////////////
// MDS - Mode-S sensor component
//////////////////////////////////////////////////////////////////////////////////
if (BO.DWord[CAT34I050Types.Subfiled_6] == true)
{
Number_Of_Octets_Present++;
// Mode S subfield is 2 octets
CAT34_I050_Data.DWord[Bit_Ops.Bits0_7_Of_DWord] = Data[CAT34.CurrentDataBufferOctalIndex + Number_Of_Octets_Present];
ThisCycleData.MDS_Data.Data_Present = true;
ThisCycleData.MDS_Data.Ant_2_Selected = BO.DWord[CAT34I050Types.Subfiled_1];
if (BO.DWord[CAT34I050Types.Subfiled_3] == true && BO.DWord[CAT34I050Types.Subfiled_2] == true)
{
ThisCycleData.MDS_Data.CH_Status = CAT34I050Types.MDS.Channel_Status.Illegal_Combination;
}
else if (BO.DWord[CAT34I050Types.Subfiled_3] == false && BO.DWord[CAT34I050Types.Subfiled_2] == false)
{
ThisCycleData.MDS_Data.CH_Status = CAT34I050Types.MDS.Channel_Status.No_Channel;
}
else if (BO.DWord[CAT34I050Types.Subfiled_3] == true)
{
ThisCycleData.MDS_Data.CH_Status = CAT34I050Types.MDS.Channel_Status.Channel_A;
}
else
{
ThisCycleData.MDS_Data.CH_Status = CAT34I050Types.MDS.Channel_Status.Channel_B;
}
ThisCycleData.MDS_Data.ModeS_Overloaded = BO.DWord[CAT34I050Types.Subfiled_4];
ThisCycleData.MDS_Data.Monitor_Sys_Disconected = BO.DWord[CAT34I050Types.Subfiled_5];
ThisCycleData.MDS_Data.CH2_For_Coordination_In_Use = BO.DWord[CAT34I050Types.Subfiled_6];
ThisCycleData.MDS_Data.CH2_For_DataLink_In_Use = BO.DWord[CAT34I050Types.Subfiled_7];
ThisCycleData.MDS_Data.Coordination_Func_Overload = BO.DWord[CAT34I050Types.FX_Primary_Subfiled]; // Not really FX but the index is correct
Number_Of_Octets_Present++;
// Mode S subfield is 2 octets
CAT34_I050_Data.DWord[Bit_Ops.Bits0_7_Of_DWord] = Data[CAT34.CurrentDataBufferOctalIndex + Number_Of_Octets_Present];
ThisCycleData.MDS_Data.DataLink_Func_Overload = BO.DWord[CAT34I050Types.Subfiled_1];
}
//////////////////////////////////////////////////////////////////////////////////
// Spare
//////////////////////////////////////////////////////////////////////////////////
if (BO.DWord[CAT34I050Types.Subfiled_7] == true)
{
Number_Of_Octets_Present++;
CAT34_I050_Data.DWord[Bit_Ops.Bits0_7_Of_DWord] = Data[CAT34.CurrentDataBufferOctalIndex + Number_Of_Octets_Present];
}
//////////////////////////////////////////////////////////////////////////////////
// Now assign it to the generic list
CAT34.I034DataItems[CAT34.ItemIDToIndex("050")].value = ThisCycleData;
//////////////////////////////////////////////////////////////////////////////////
// Increase data buffer index so it ready for the next data item.
CAT34.CurrentDataBufferOctalIndex = CAT34.CurrentDataBufferOctalIndex + Number_Of_Octets_Present;
}
}
private static void ExtractAndDecodeASTERIX_CAT_DataBlock(byte[] DataBlock, bool Is_Live_Data)
{
// First thing is to store the time of the reception regardless of the category received
string Time = DateTime.Now.Hour.ToString().PadLeft(2, '0') + ":" + DateTime.Now.Minute.ToString().PadLeft(2, '0') + ":" +
DateTime.Now.Second.ToString().PadLeft(2, '0') + ":" + DateTime.Now.Millisecond.ToString().PadLeft(3, '0');
// Save off the time of reception so decoders can use it
TimeOfReception = DateTime.Now;
// Extract ASTERIX category
string Category = ASTERIX.ExtractCategory(DataBlock);
// Extract lenght in Bytes, as indicated by the ASTERIX
string LengthOfDataBlockInBytes = ASTERIX.ExtractLengthOfDataBlockInBytes(DataBlock);
// Here format the lenght of bytes
// to always use 3 characters for better alignement
if (LengthOfDataBlockInBytes.Length < 3)
{
LengthOfDataBlockInBytes = "0" + LengthOfDataBlockInBytes;
}
else if (LengthOfDataBlockInBytes.Length < 2)
{
LengthOfDataBlockInBytes = "00" + LengthOfDataBlockInBytes;
}
// Define a string to store data not specific for all messages and add commond data
// 1. TIME of reception
// 2. Source IP address
// 3. Multicast IP address
// 4. Length of data block in bytes
// 5. Asterix Category
//
// 6. Append Category specifc data, done just below
string Common_Message_Data_String;
if (Is_Live_Data == true)
Common_Message_Data_String = Time + " " + iep.ToString() + " " + SharedData.CurrentMulticastAddress + ':' + SharedData.Current_Port.ToString() + " " + LengthOfDataBlockInBytes.ToString() + " " + Category + " ";
else
Common_Message_Data_String = Time + " " + "Recorded" + " " + "Recorded" + ':' + "Recorded" + " " + LengthOfDataBlockInBytes.ToString() + " " + Category + " ";
// Hold individual records of the messages
// from an individual data block
string[] MessageData = new string[3000];
byte[] DataBlockNoCATandLEN = new byte[DataBlock.Length - 3];
// Now after we extracted Category and Lenght of the Data Block lets remove the first three octets from the data
// buffer and pass it on to individual message handlers to do message decoding
Array.Copy(DataBlock, 3, DataBlockNoCATandLEN, 0, (DataBlock.Length - 3));
DataBlock = DataBlockNoCATandLEN;
// Now do a switch based on the category received
int NumOfMsgsDecoded = 0;
switch (Category)
{
// Monoradar Data Target Reports, from a Radar Surveillance System to an SDPS
// (plots and tracks from PSRs, SSRs, MSSRs, excluding Mode S and ground surveillance)
case "001":
if (Properties.Settings.Default.CAT_001_Enabled == true)
{
CAT01 MyCAT01 = new CAT01();
MessageData = MyCAT01.Decode(DataBlock, Time, out NumOfMsgsDecoded);
}
break;
// Monoradar Service Messages (status, North marker, sector crossing messages)
case "002":
if (Properties.Settings.Default.CAT_002_Enabled == true)
{
CAT02 MyCAT02 = new CAT02();
MessageData = MyCAT02.Decode(DataBlock, Time, out NumOfMsgsDecoded);
}
break;
// Monoradar Derived Weather Information
case "008":
if (Properties.Settings.Default.CAT_008_Enabled == true)
{
CAT08 MyCAT08 = new CAT08();
}
break;
// Next version of Category 002: PSR Radar, M-SSR Radar, Mode-S Station
case "034":
if (Properties.Settings.Default.CAT_034_Enabled == true)
{
CAT34 MyCAT34 = new CAT34();
MessageData = MyCAT34.Decode(DataBlock, Time, out NumOfMsgsDecoded);
}
break;
// Next version of Category 001: PSR Radar, M-SSR Radar, Mode-S Station
case "048":
if (Properties.Settings.Default.CAT_048_Enabled == true)
{
CAT48 MyCAT48 = new CAT48();
MessageData = MyCAT48.Decode(DataBlock, Time, out NumOfMsgsDecoded);
}
break;
// System Track Data(next version of Category 030 & 011, also applicable to non-ARTAS systems)
case "062":
if (Properties.Settings.Default.CAT_062_Enabled == true)
{
CAT62 MyCAT62 = new CAT62();
MessageData = MyCAT62.Decode(DataBlock, Time, out NumOfMsgsDecoded);
}
break;
// Sensor Status Messages (SPDS)
case "063":
if (Properties.Settings.Default.CAT_063_Enabled == true)
{
CAT63 MyCAT63 = new CAT63();
}
break;
// SDPS Service Status Messages (SDPS)
case "065":
if (Properties.Settings.Default.CAT_065_Enabled == true)
{
CAT65 MyCAT65 = new CAT65();
}
break;
// Transmission of Reference Trajectory State Vectors
case "244":
if (Properties.Settings.Default.CAT_244_Enabled == true)
{
CAT244 MyCAT244 = new CAT244();
}
break;
// Handle unsupported data/categories
default:
Common_Message_Data_String = Common_Message_Data_String + " Unsupported category " + Category + " has been received";
break;
}
if (Properties.Settings.Default.PopulateMainListBox == true)
{
for (int I = 0; I < NumOfMsgsDecoded; I++)
SharedData.DataBox.Items.Add(Common_Message_Data_String + MessageData[I]);
}
}
private static void ExtractAndDecodeASTERIX_CAT_DataBlock(byte[] DataBlock, bool Is_Live_Data)
{
// First thing is to store the time of the reception regardless of the category received
string Time = DateTime.Now.Hour.ToString().PadLeft(2, '0') + ":" + DateTime.Now.Minute.ToString().PadLeft(2, '0') + ":" +
DateTime.Now.Second.ToString().PadLeft(2, '0') + ":" + DateTime.Now.Millisecond.ToString().PadLeft(3, '0');
// Save off the time of reception so decoders can use it
TimeOfReception = DateTime.Now;
// Extract ASTERIX category
string Category = ASTERIX.ExtractCategory(DataBlock);
// Extract lenght in Bytes, as indicated by the ASTERIX
string LengthOfDataBlockInBytes = ASTERIX.ExtractLengthOfDataBlockInBytes(DataBlock);
// Here format the lenght of bytes
// to always use 3 characters for better alignement
if (LengthOfDataBlockInBytes.Length < 3)
{
LengthOfDataBlockInBytes = "0" + LengthOfDataBlockInBytes;
}
else if (LengthOfDataBlockInBytes.Length < 2)
{
LengthOfDataBlockInBytes = "00" + LengthOfDataBlockInBytes;
}
// Define a string to store data not specific for all messages and add commond data
// 1. TIME of reception
// 2. Source IP address
// 3. Multicast IP address
// 4. Length of data block in bytes
// 5. Asterix Category
//
// 6. Append Category specifc data, done just below
string Common_Message_Data_String;
if (Is_Live_Data == true)
{
Common_Message_Data_String = Time + " " + iep.ToString() + " " + SharedData.CurrentMulticastAddress + ':' + SharedData.Current_Port.ToString() + " " + LengthOfDataBlockInBytes.ToString() + " " + Category + " ";
}
else
{
Common_Message_Data_String = Time + " " + "Recorded" + " " + "Recorded" + ':' + "Recorded" + " " + LengthOfDataBlockInBytes.ToString() + " " + Category + " ";
}
// Hold individual records of the messages
// from an individual data block
string[] MessageData = new string[3000];
byte[] DataBlockNoCATandLEN = new byte[DataBlock.Length - 3];
// Now after we extracted Category and Lenght of the Data Block lets remove the first three octets from the data
// buffer and pass it on to individual message handlers to do message decoding
Array.Copy(DataBlock, 3, DataBlockNoCATandLEN, 0, (DataBlock.Length - 3));
DataBlock = DataBlockNoCATandLEN;
// Now do a switch based on the category received
int NumOfMsgsDecoded = 0;
switch (Category)
{
// Monoradar Data Target Reports, from a Radar Surveillance System to an SDPS
// (plots and tracks from PSRs, SSRs, MSSRs, excluding Mode S and ground surveillance)
case "001":
if (Properties.Settings.Default.CAT_001_Enabled == true)
{
CAT01 MyCAT01 = new CAT01();
MessageData = MyCAT01.Decode(DataBlock, Time, out NumOfMsgsDecoded);
}
break;
// Monoradar Service Messages (status, North marker, sector crossing messages)
case "002":
if (Properties.Settings.Default.CAT_002_Enabled == true)
{
CAT02 MyCAT02 = new CAT02();
MessageData = MyCAT02.Decode(DataBlock, Time, out NumOfMsgsDecoded);
}
break;
// Monoradar Derived Weather Information
case "008":
if (Properties.Settings.Default.CAT_008_Enabled == true)
{
CAT08 MyCAT08 = new CAT08();
}
break;
// Next version of Category 002: PSR Radar, M-SSR Radar, Mode-S Station
case "034":
if (Properties.Settings.Default.CAT_034_Enabled == true)
{
CAT34 MyCAT34 = new CAT34();
MessageData = MyCAT34.Decode(DataBlock, Time, out NumOfMsgsDecoded);
}
break;
// Next version of Category 001: PSR Radar, M-SSR Radar, Mode-S Station
case "048":
if (Properties.Settings.Default.CAT_048_Enabled == true)
{
CAT48 MyCAT48 = new CAT48();
MessageData = MyCAT48.Decode(DataBlock, Time, out NumOfMsgsDecoded);
}
break;
// System Track Data(next version of Category 030 & 011, also applicable to non-ARTAS systems)
case "062":
if (Properties.Settings.Default.CAT_062_Enabled == true)
{
CAT62 MyCAT62 = new CAT62();
MessageData = MyCAT62.Decode(DataBlock, Time, out NumOfMsgsDecoded);
}
break;
// Sensor Status Messages (SPDS)
case "063":
if (Properties.Settings.Default.CAT_063_Enabled == true)
{
CAT63 MyCAT63 = new CAT63();
}
break;
// SDPS Service Status Messages (SDPS)
case "065":
if (Properties.Settings.Default.CAT_065_Enabled == true)
{
CAT65 MyCAT65 = new CAT65();
}
break;
// Transmission of Reference Trajectory State Vectors
case "244":
if (Properties.Settings.Default.CAT_244_Enabled == true)
{
CAT244 MyCAT244 = new CAT244();
}
break;
// Handle unsupported data/categories
default:
Common_Message_Data_String = Common_Message_Data_String + " Unsupported category " + Category + " has been received";
break;
}
if (Properties.Settings.Default.PopulateMainListBox == true)
{
for (int I = 0; I < NumOfMsgsDecoded; I++)
{
SharedData.DataBox.Items.Add(Common_Message_Data_String + MessageData[I]);
}
}
}
public static void DecodeCAT34I030(byte[] Data)
{
CAT34I030Types.CAT34I030_Time_Of_The_Day_User_Type MyCAT34I030 = new CAT34I030Types.CAT34I030_Time_Of_The_Day_User_Type();
// Get an instance of bit ops
Bit_Ops BO = new Bit_Ops();
//Extract the first octet
BO.DWord[Bit_Ops.Bits0_7_Of_DWord] = Data[CAT34.CurrentDataBufferOctalIndex + 3];
BO.DWord[Bit_Ops.Bits8_15_Of_DWord] = Data[CAT34.CurrentDataBufferOctalIndex + 2];
BO.DWord[Bit_Ops.Bits16_23_Of_DWord] = Data[CAT34.CurrentDataBufferOctalIndex + 1];
double Result = 0.0;
if (BO.DWord[Bit_Ops.Bit0] == true)
{
Result = LSB_1;
}
if (BO.DWord[Bit_Ops.Bit1] == true)
{
Result = Result + LSB_2;
}
if (BO.DWord[Bit_Ops.Bit2] == true)
{
Result = Result + LSB_3;
}
if (BO.DWord[Bit_Ops.Bit3] == true)
{
Result = Result + LSB_4;
}
if (BO.DWord[Bit_Ops.Bit4] == true)
{
Result = Result + LSB_5;
}
if (BO.DWord[Bit_Ops.Bit5] == true)
{
Result = Result + LSB_6;
}
if (BO.DWord[Bit_Ops.Bit6] == true)
{
Result = Result + LSB_7;
}
if (BO.DWord[Bit_Ops.Bit7] == true)
{
Result = Result + LSB_8;
}
if (BO.DWord[Bit_Ops.Bit8] == true)
{
Result = Result + LSB_9;
}
if (BO.DWord[Bit_Ops.Bit9] == true)
{
Result = Result + LSB_10;
}
if (BO.DWord[Bit_Ops.Bit10] == true)
{
Result = Result + LSB_11;
}
if (BO.DWord[Bit_Ops.Bit11] == true)
{
Result = Result + LSB_12;
}
if (BO.DWord[Bit_Ops.Bit12] == true)
{
Result = Result + LSB_13;
}
if (BO.DWord[Bit_Ops.Bit13] == true)
{
Result = Result + LSB_14;
}
if (BO.DWord[Bit_Ops.Bit14] == true)
{
Result = Result + LSB_15;
}
if (BO.DWord[Bit_Ops.Bit15] == true)
{
Result = Result + LSB_16;
}
if (BO.DWord[Bit_Ops.Bit16] == true)
{
Result = Result + LSB_17;
}
if (BO.DWord[Bit_Ops.Bit17] == true)
{
Result = Result + LSB_18;
}
if (BO.DWord[Bit_Ops.Bit18] == true)
{
Result = Result + LSB_19;
}
if (BO.DWord[Bit_Ops.Bit19] == true)
{
Result = Result + LSB_20;
}
if (BO.DWord[Bit_Ops.Bit20] == true)
{
Result = Result + LSB_21;
}
if (BO.DWord[Bit_Ops.Bit21] == true)
{
Result = Result + LSB_22;
}
if (BO.DWord[Bit_Ops.Bit22] == true)
{
Result = Result + LSB_23;
}
if (BO.DWord[Bit_Ops.Bit23] == true)
{
Result = Result + LSB_24;
}
MyCAT34I030.Time_Of_The_Day_In_Sec_Since_Midnight_UTC = Result;
// Compute the time in a human friendy form
// from sec.miliec since midnight UTC.
double hrs, sec, min, milis;
hrs = Math.Floor(Result / 3600.00);
double tmp = (Result - (hrs * 3600.0)) / 60;
min = Math.Floor(tmp);
tmp = (tmp * 60.0) - (min * 60.0);
sec = Math.Floor(tmp);
milis = (tmp - sec) * 1000.0;
MyCAT34I030.TimeOfDay = new TimeSpan(0, (int)hrs, (int)min, (int)sec, (int)milis);
//////////////////////////////////////////////////////////////////////////////////
// Now assign it to the generic list
CAT34.I034DataItems[CAT34.ItemIDToIndex("030")].value = MyCAT34I030;
//////////////////////////////////////////////////////////////////////////////////
// Leave it at the current index for the next decode
CAT34.CurrentDataBufferOctalIndex = CAT34.CurrentDataBufferOctalIndex + 3;
}
// This method will accept a buffer of data with the assumption that
// category has been determined. It will then decode the data and save
// it in the shared buffer. Everry time a message is passed in the data
// will be appended to the buffer. This means that each line will contain
// data for one message. For data items which are not in the message,
// indicated by the FSPEC field, N/A will be inserted instead. The shared
// buffer is loacted in the SharedData and will not be saved. It is responsibility
// of the user to save the data in a file it desired.
public static void Do(byte[] Data)
{
/////////////////////////////////////////////////////////////////////////
//
// Next version of Category 002: PSR Radar, M-SSR Radar, Mode-S Station
// Length in bytes
//
// I002/000, Message Type 1
if (CAT34.I034DataItems[CAT34.ItemIDToIndex("000")].CurrentlyPresent == true)
{
CAT34I000UserData.DecodeCAT34I000(Data);
}
// 3 I034/030 Time-of-Day 3
if (CAT34.I034DataItems[CAT34.ItemIDToIndex("030")].CurrentlyPresent == true)
{
CAT34I030UserData.DecodeCAT34I030(Data);
}
// 4 I034/020 Sector Number 1
if (CAT34.I034DataItems[CAT34.ItemIDToIndex("020")].CurrentlyPresent == true)
{
CAT34I020UserData.DecodeCAT34I020(Data);
}
// 5 I034/041 Antenna Rotation Period 2
if (CAT34.I034DataItems[CAT34.ItemIDToIndex("041")].CurrentlyPresent == true)
{
CAT34I041UserData.DecodeCAT34I041(Data);
}
// 6 I034/050 System Configuration and Status 1+
if (CAT34.I034DataItems[CAT34.ItemIDToIndex("050")].CurrentlyPresent == true)
{
CAT34I050UserData.DecodeCAT34I050(Data);
}
// 7 I034/060 System Processing Mode 1+
if (CAT34.I034DataItems[CAT34.ItemIDToIndex("060")].CurrentlyPresent == true)
{
CAT34I060UserData.DecodeCAT34I060(Data);
}
// FX
// 8 I034/070 Message Count Values 1+2N
if (CAT34.I034DataItems[CAT34.ItemIDToIndex("070")].CurrentlyPresent == true)
{
CAT34I070UserData.DecodeCAT34I070(Data);
}
// 9 I034/100 Generic Polar Window 8
if (CAT34.I034DataItems[CAT34.ItemIDToIndex("100")].CurrentlyPresent == true)
{
CAT34I100UserData.DecodeCAT34I100(Data);
}
// 10 I034/110 Data Filter 1
if (CAT34.I034DataItems[CAT34.ItemIDToIndex("110")].CurrentlyPresent == true)
{
CAT34I110UserData.DecodeCAT34I110(Data);
}
// 11 I034/120 3D-Position of Data Source 8
if (CAT34.I034DataItems[CAT34.ItemIDToIndex("120")].CurrentlyPresent == true)
{
CAT34I120UserData.DecodeCAT34I120(Data);
}
// 12 I034/090 Collimation Error 2
if (CAT34.I034DataItems[CAT34.ItemIDToIndex("090")].CurrentlyPresent == true)
{
CAT34I090UserData.DecodeCAT34I090(Data);
}
////////////////////////////////////////////////////////////////////////////////////
// All CAT34 data has been decoded, so lets save off the message data to the global
// storage for latter usage
MainASTERIXDataStorage.CAT34Data CAT34MessageData = new MainASTERIXDataStorage.CAT34Data();
foreach (CAT34.CAT34DataItem Item in CAT34.I034DataItems)
{
CAT34.CAT34DataItem MyItem = new CAT34.CAT34DataItem();
MyItem.CurrentlyPresent = Item.CurrentlyPresent;
MyItem.Description = Item.Description;
MyItem.HasBeenPresent = Item.HasBeenPresent;
MyItem.ID = Item.ID;
MyItem.value = Item.value;
CAT34MessageData.CAT34DataItems.Add(MyItem);
}
MainASTERIXDataStorage.CAT34Message.Add(CAT34MessageData);
CAT34.Intitialize(false);
}