public void Bake(apPortrait portrait, apOptModifierUnitBase parentModifier, apModifierParamSetGroup srcParamSetGroup)
{
_portrait = portrait;
_parentModifier = parentModifier;
_syncTarget = srcParamSetGroup._syncTarget;
//_keyControlParamName = srcParamSetGroup._keyControlParamName;
_keyControlParamID = srcParamSetGroup._keyControlParamID;
_keyControlParam = null; //<<이건 링크로 해결하자
//애니메이션 값도 넣어주자
_keyAnimClipID = srcParamSetGroup._keyAnimClipID;
_keyAnimTimelineID = srcParamSetGroup._keyAnimTimelineID;
_keyAnimTimelineLayerID = srcParamSetGroup._keyAnimTimelineLayerID;
_keyAnimClip = null;
_keyAnimTimeline = null;
_keyAnimTimelineLayer = null;
_paramSetList.Clear();
for (int i = 0; i < srcParamSetGroup._paramSetList.Count; i++)
{
apModifierParamSet srcParamSet = srcParamSetGroup._paramSetList[i];
apOptParamSet optParamSet = new apOptParamSet();
optParamSet.LinkParamSetGroup(this, portrait);
optParamSet.BakeModifierParamSet(srcParamSet, portrait);
_paramSetList.Add(optParamSet);
}
_isEnabled = srcParamSetGroup._isEnabled;
_layerIndex = srcParamSetGroup._layerIndex;
_layerWeight = srcParamSetGroup._layerWeight;
_blendMethod = srcParamSetGroup._blendMethod;
_isColorPropertyEnabled = srcParamSetGroup._isColorPropertyEnabled; //<<추가.
_calculatedWeightedVertexList.Clear();
for (int i = 0; i < srcParamSetGroup._calculatedWeightedVertexList.Count; i++)
{
apModifierParamSetGroupVertWeight srcWV = srcParamSetGroup._calculatedWeightedVertexList[i];
apOptParamSetGroupVertWeight optWV = new apOptParamSetGroupVertWeight();
optWV.Bake(srcWV);
optWV.Link(portrait.GetOptTransform(optWV._meshTransform_ID)); //OptTransform을 연결한다.
_calculatedWeightedVertexList.Add(optWV);
}
LinkPortrait(portrait, parentModifier);
}
// Init
//--------------------------------------------
public apOptCalculatedResultParam(apCalculatedResultParam.CALCULATED_VALUE_TYPE calculatedValueType,
apCalculatedResultParam.CALCULATED_SPACE calculatedSpace,
apOptModifierUnitBase linkedModifier,
apOptTransform targetOptTranform,
apOptMesh targetOptMesh,
apOptBone targetBone, //<<추가
apOptParamSetGroupVertWeight weightedVertData)
{
_calculatedValueType = calculatedValueType;
_calculatedSpace = calculatedSpace;
//TODO 여기서부터 작업하자
_linkedModifier = linkedModifier;
_targetOptTransform = targetOptTranform;
_targetOptMesh = targetOptMesh;
_targetBone = targetBone; //<<추가
_weightedVertexData = weightedVertData;
//Vertex 데이터가 들어간 경우 Vert 리스트를 만들어주자
if ((int)(_calculatedValueType & apCalculatedResultParam.CALCULATED_VALUE_TYPE.VertexPos) != 0)
{
int nPos = 0;
if (_targetOptMesh.LocalVertPositions != null)
{
nPos = _targetOptMesh.LocalVertPositions.Length;
}
_result_Positions = new List <Vector2>();
_tmp_Positions = new List <Vector2>();
for (int i = 0; i < nPos; i++)
{
_result_Positions.Add(Vector2.zero);
_tmp_Positions.Add(Vector2.zero);
}
}
}
public void LinkWeightedVertexData(apOptParamSetGroupVertWeight weightedVertData)
{
_weightedVertexData = weightedVertData;
}
// Init
//--------------------------------------------
public apOptCalculatedResultParam(apCalculatedResultParam.CALCULATED_VALUE_TYPE calculatedValueType,
apCalculatedResultParam.CALCULATED_SPACE calculatedSpace,
apOptModifierUnitBase linkedModifier,
apOptTransform targetOptTranform,
apOptTransform ownerOptTranform,
apOptMesh targetOptMesh,
apOptBone targetBone, //<<추가
apOptParamSetGroupVertWeight weightedVertData)
{
_calculatedValueType = calculatedValueType;
_calculatedSpace = calculatedSpace;
//TODO 여기서부터 작업하자
_linkedModifier = linkedModifier;
_targetOptTransform = targetOptTranform;
_ownerOptTransform = ownerOptTranform;
_targetOptMesh = targetOptMesh;
_targetBone = targetBone; //<<추가
_paramKeyValues.Clear();
_subParamKeyValueList.Clear();
_weightedVertexData = weightedVertData;
_isVertexLocalMorph = false;
_isVertexRigging = false;
//Vertex 데이터가 들어간 경우 Vert 리스트를 만들어주자
if ((int)(_calculatedValueType & apCalculatedResultParam.CALCULATED_VALUE_TYPE.VertexPos) != 0)
{
int nPos = 0;
if (_targetOptMesh.LocalVertPositions != null)
{
nPos = _targetOptMesh.LocalVertPositions.Length;
}
_result_Positions = new Vector2[nPos];
_tmp_Positions = new Vector2[nPos];
for (int i = 0; i < nPos; i++)
{
_result_Positions[i] = Vector2.zero;
_tmp_Positions[i] = Vector2.zero;
}
if (_linkedModifier._modifierType == apModifierBase.MODIFIER_TYPE.Rigging)
{
_result_VertMatrices = new apMatrix3x3[nPos];
_tmp_VertMatrices = new apMatrix3x3[nPos];
for (int i = 0; i < nPos; i++)
{
_result_VertMatrices[i].SetIdentity();
_tmp_VertMatrices[i].SetIdentity();
}
}
//if(_linkedModifier._modifierType == apModifierBase.MODIFIER_TYPE.Morph ||
// _linkedModifier._modifierType == apModifierBase.MODIFIER_TYPE.AnimatedMorph)
//{
// //최적화를 위한 VertLocalPair를 만든다. 개수는 ParamSetGroup 만큼
// _result_VertLocalPairs = new apOptVertexRequest[_linkedModifier._paramSetGroupList.Count];
// for (int iVLP = 0; iVLP < _result_VertLocalPairs.Length; iVLP++)
// {
// apOptVertexRequest newRequest = new apOptVertexRequest();
// newRequest.InitVertLocalPair(_linkedModifier._paramSetGroupList[iVLP]);
// _result_VertLocalPairs[iVLP] = newRequest;
// }
//}
if (_linkedModifier._modifierType == apModifierBase.MODIFIER_TYPE.AnimatedMorph ||
_linkedModifier._modifierType == apModifierBase.MODIFIER_TYPE.Morph)
{
_isVertexLocalMorph = true;
}
else if (_linkedModifier._modifierType == apModifierBase.MODIFIER_TYPE.Rigging)
{
_isVertexRigging = true;
}
}
}
//Link가 모두 끝난 후 실행시켜준다.
//Modifier -> Target Tranform (=RenderUnit)을 CalculatedParam을 이용해 연결해준다.
public void LinkModifierStackToRenderUnitCalculateStack(bool isRoot, apOptTransform rootOptTransform, bool isRecursive)
{
//RenderUnit => OptTransform
//전체 Modifier중에서 RenderUnit을 포함한 Modifer를 찾는다.
//그 중, RenderUnit에 대한것만 처리할 CalculateResultParam을 만들고 연동한다.
//ResultParam을 RenderUnit의 CalculateStack에 넣는다.
//if (_parentTransform != null)
//{
// Debug.Log(">> [Opt] LinkModifierStackToRenderUnitCalculateStack - " + _parentTransform._name + "(Root : " + rootOptTransform._name + ")");
//}
//else if(isRoot)
//{
// Debug.Log(">> [Opt] LinkModifierStackToRenderUnitCalculateStack - " + rootOptTransform._name + " - Root");
//}
//여기서 버그가 발생되었다.
if (_nModifiers != _modifiers.Count)
{
_nModifiers = _modifiers.Count;
}
for (int iMod = 0; iMod < _nModifiers; iMod++)
{
//Modifier ->..
apOptModifierUnitBase modifier = _modifiers[iMod];
List <apOptParamSetGroup> paramSetGroups = modifier._paramSetGroupList;
for (int iGroup = 0; iGroup < paramSetGroups.Count; iGroup++)
{
//Modifier -> ParamSetGroup ->..
apOptParamSetGroup paramSetGroup = paramSetGroups[iGroup];
List <apOptParamSet> paramSets = paramSetGroup._paramSetList;
for (int iParam = 0; iParam < paramSets.Count; iParam++)
{
//Modifier -> ParamSetGroup -> ParamSet ->...
apOptParamSet paramSet = paramSets[iParam];
List <apOptModifiedMesh> modMeshes = paramSet._meshData;
List <apOptModifiedBone> modBones = paramSet._boneData;
for (int iModMesh = 0; iModMesh < modMeshes.Count; iModMesh++)
{
//[핵심]
//Modifier -> ParamSetGroup -> ParamSet -> ModMeh
//이제 이 ModMesh와 타겟 Transform을 연결하자.
//연결할땐 Calculated 오브젝트를 만들어서 연결
apOptModifiedMesh modMesh = modMeshes[iModMesh];
if (modMesh._targetTransform != null)
{
//이미 만든 Calculate Param이 있는지 확인
apOptCalculatedResultParam existParam = modifier.GetCalculatedResultParam(modMesh._targetTransform);
apOptParamSetGroupVertWeight weightedVertexData = null;
if (modMesh._targetMesh != null)
{
weightedVertexData = paramSetGroup.GetWeightVertexData(modMesh._targetTransform);
}
if (existParam != null)
{
//이미 존재하는 Calculated Param이 있다.
existParam.AddParamSetAndModifiedValue(paramSetGroup, paramSet, modMesh, null);
//추가 12.5
//이미 추가된 ResultParam에 ParamKeyValue가 추가될 때 CalculateStack이 갱신되는 경우가 있다.
modMesh._targetTransform.CalculatedStack.OnParamKeyValueAddedOnCalculatedResultParam(existParam);
}
else
{
//새로 Calculated Param을 만들어야 한다.
apOptCalculatedResultParam newCalParam = new apOptCalculatedResultParam(
modifier._calculatedValueType,
modifier._calculatedSpace,
modifier,
modMesh._targetTransform,
modMesh._targetTransform,
modMesh._targetMesh,
null,
weightedVertexData);
newCalParam.AddParamSetAndModifiedValue(paramSetGroup, paramSet, modMesh, null);
//Modifier에 등록하고
modifier._calculatedResultParams.Add(newCalParam);
//OptTranform에도 등록하자
modMesh._targetTransform.CalculatedStack.AddCalculatedResultParam(newCalParam);
}
}
}
//변경 10.2 :
//기존 : ModBone의 _meshGroup_Bone에 해당하는 OptTransform에 연결했다.
//변경 : ModBone은 항상 RootBone에 연결한다.
for (int iModBone = 0; iModBone < modBones.Count; iModBone++)
{
apOptModifiedBone modBone = modBones[iModBone];
if (modBone._bone == null || modBone._meshGroup_Bone == null)
{
Debug.LogError("ModBone -> Calculate Link (Opt) 실패");
continue;
}
//<BONE_EDIT>
//apOptCalculatedResultParam existParam = modifier.GetCalculatedResultParam_Bone(
// modBone._meshGroup_Bone, modBone._bone);
//변경
apOptCalculatedResultParam existParam = modifier.GetCalculatedResultParam_Bone(
rootOptTransform, modBone._bone, modBone._meshGroup_Bone);
if (existParam != null)
{
//이미 있다면 ModBone만 추가해주자
existParam.AddParamSetAndModifiedValue(paramSetGroup, paramSet, null, modBone);
//Debug.LogWarning(" < Exist > - Mod Bone [" + modBone._bone._name + " << " + modBone._meshGroup_Bone._name + "]");
}
else
{
//Debug.Log("Mod Bone -> Calculate Param 등록");
//새로 CalculateParam을 만들고
//<BONE_EDIT>
//apOptCalculatedResultParam newCalParam = new apOptCalculatedResultParam(
// modifier._calculatedValueType,
// modifier._calculatedSpace,
// modifier,
// modBone._meshGroup_Bone,
// modBone._meshGroup_Bone._childMesh,
// modBone._bone,
// null//WeightedVertex
// );
//Debug.LogError(" < New > - Mod Bone [" + modBone._bone._name + " << " + modBone._meshGroup_Bone._name + "]");
apOptCalculatedResultParam newCalParam = new apOptCalculatedResultParam(
modifier._calculatedValueType,
modifier._calculatedSpace,
modifier,
rootOptTransform, //<<변경
modBone._meshGroup_Bone, //추가
modBone._meshGroup_Bone._childMesh,
modBone._bone,
null //WeightedVertex
);
newCalParam.AddParamSetAndModifiedValue(paramSetGroup, paramSet, null, modBone);
// Modifier에 등록하고
modifier._calculatedResultParams.Add(newCalParam);
//RenderUnit에도 등록을 하자
//<BONE_EDIT>
//modBone._meshGroup_Bone.CalculatedStack.AddCalculatedResultParam(newCalParam);
//변경
rootOptTransform.CalculatedStack.AddCalculatedResultParam(newCalParam);
}
}
}
}
//Modifier에서
//SubList를 한번 정렬하자
for (int iCal = 0; iCal < modifier._calculatedResultParams.Count; iCal++)
{
modifier._calculatedResultParams[iCal].SortSubList();
}
}
//추가>>
//하위 객체에 대해서도 Link를 자동으로 수행한다.
//다 끝나고 Sort
apOptTransform childTransform = null;
if (_parentTransform != null)
{
if (isRecursive)
{
if (_parentTransform._childTransforms != null && _parentTransform._childTransforms.Length > 0)
{
for (int i = 0; i < _parentTransform._childTransforms.Length; i++)
{
childTransform = _parentTransform._childTransforms[i];
if (childTransform._unitType == apOptTransform.UNIT_TYPE.Group)
{
if (childTransform != _parentTransform)
{
//<<여기서도 같이 수행
childTransform._modifierStack.LinkModifierStackToRenderUnitCalculateStack(false, rootOptTransform, true);
}
}
}
}
}
if (isRoot)
{
//Root인 경우
//RenderUnit들을 검사하면서 Calculated Stack에 대해서 Sort를 해주자
SortAllCalculatedStack(_parentTransform);
}
}
else
{
Debug.LogError("<<<< Error : Mod Link시 Parent Transform이 연결이 안되었다");
}
}
//Link가 모두 끝난 후 실행시켜준다.
//Modifier -> Target Tranform (=RenderUnit)을 CalculatedParam을 이용해 연결해준다.
public void LinkModifierStackToRenderUnitCalculateStack(bool isRoot = true)
{
//RenderUnit => OptTransform
//전체 Modifier중에서 RenderUnit을 포함한 Modifer를 찾는다.
//그 중, RenderUnit에 대한것만 처리할 CalculateResultParam을 만들고 연동한다.
//ResultParam을 RenderUnit의 CalculateStack에 넣는다.
for (int iMod = 0; iMod < _nModifiers; iMod++)
{
//Modifier ->..
apOptModifierUnitBase modifier = _modifiers[iMod];
List <apOptParamSetGroup> paramSetGroups = modifier._paramSetGroupList;
for (int iGroup = 0; iGroup < paramSetGroups.Count; iGroup++)
{
//Modifier -> ParamSetGroup ->..
apOptParamSetGroup paramSetGroup = paramSetGroups[iGroup];
List <apOptParamSet> paramSets = paramSetGroup._paramSetList;
for (int iParam = 0; iParam < paramSets.Count; iParam++)
{
//Modifier -> ParamSetGroup -> ParamSet ->...
apOptParamSet paramSet = paramSets[iParam];
List <apOptModifiedMesh> modMeshes = paramSet._meshData;
List <apOptModifiedBone> modBones = paramSet._boneData;
for (int iModMesh = 0; iModMesh < modMeshes.Count; iModMesh++)
{
//[핵심]
//Modifier -> ParamSetGroup -> ParamSet -> ModMeh
//이제 이 ModMesh와 타겟 Transform을 연결하자.
//연결할땐 Calculated 오브젝트를 만들어서 연결
apOptModifiedMesh modMesh = modMeshes[iModMesh];
if (modMesh._targetTransform != null)
{
//이미 만든 Calculate Param이 있는지 확인
apOptCalculatedResultParam existParam = modifier.GetCalculatedResultParam(modMesh._targetTransform);
apOptParamSetGroupVertWeight weightedVertexData = null;
if (modMesh._targetMesh != null)
{
weightedVertexData = paramSetGroup.GetWeightVertexData(modMesh._targetTransform);
}
if (existParam != null)
{
//이미 존재하는 Calculated Param이 있다.
existParam.AddParamSetAndModifiedValue(paramSetGroup, paramSet, modMesh, null);
}
else
{
//새로 Calculated Param을 만들어야 한다.
apOptCalculatedResultParam newCalParam = new apOptCalculatedResultParam(
modifier._calculatedValueType,
modifier._calculatedSpace,
modifier,
modMesh._targetTransform,
modMesh._targetMesh,
null,
weightedVertexData);
newCalParam.AddParamSetAndModifiedValue(paramSetGroup, paramSet, modMesh, null);
//Modifier에 등록하고
modifier._calculatedResultParams.Add(newCalParam);
//OptTranform에도 등록하자
modMesh._targetTransform.CalculatedStack.AddCalculatedResultParam(newCalParam);
}
}
}
for (int iModBone = 0; iModBone < modBones.Count; iModBone++)
{
apOptModifiedBone modBone = modBones[iModBone];
if (modBone._bone == null || modBone._meshGroup_Bone == null)
{
Debug.LogError("ModBone -> Calculate Link (Opt) 실패");
continue;
}
apOptCalculatedResultParam existParam = modifier.GetCalculatedResultParam_Bone(
modBone._meshGroup_Bone, modBone._bone);
if (existParam != null)
{
//이미 있다면 ModBone만 추가해주자
existParam.AddParamSetAndModifiedValue(paramSetGroup, paramSet, null, modBone);
}
else
{
//Debug.Log("Mod Bone -> Calculate Param 등록");
//새로 CalculateParam을 만들고
apOptCalculatedResultParam newCalParam = new apOptCalculatedResultParam(
modifier._calculatedValueType,
modifier._calculatedSpace,
modifier,
modBone._meshGroup_Bone,
modBone._meshGroup_Bone._childMesh,
modBone._bone,
null //WeightedVertex
);
newCalParam.AddParamSetAndModifiedValue(paramSetGroup, paramSet, null, modBone);
// Modifier에 등록하고
modifier._calculatedResultParams.Add(newCalParam);
//RenderUnit에도 등록을 하자
modBone._meshGroup_Bone.CalculatedStack.AddCalculatedResultParam(newCalParam);
}
}
}
}
//Modifier에서
//SubList를 한번 정렬하자
for (int iCal = 0; iCal < modifier._calculatedResultParams.Count; iCal++)
{
modifier._calculatedResultParams[iCal].SortSubList();
}
}
//추가>>
//하위 객체에 대해서도 Link를 자동으로 수행한다.
//다 끝나고 Sort
apOptTransform childTransform = null;
if (_parentTransform != null)
{
if (_parentTransform._childTransforms != null && _parentTransform._childTransforms.Length > 0)
{
for (int i = 0; i < _parentTransform._childTransforms.Length; i++)
{
childTransform = _parentTransform._childTransforms[i];
if (childTransform._unitType == apOptTransform.UNIT_TYPE.Group)
{
if (childTransform != _parentTransform)
{
childTransform._modifierStack.LinkModifierStackToRenderUnitCalculateStack(false); //<<여기서도 같이 수행
}
}
}
}
if (isRoot)
{
//Root인 경우
//RenderUnit들을 검사하면서 Calculated Stack에 대해서 Sort를 해주자
SortAllCalculatedStack(_parentTransform);
}
}
}
