//Create Parkinglots along edge
private void CreateOuterParkingLot(Curve boundaryCurve, LocalRules localRules, Plane plane)
{
//Change Curve offset
BoundingBox bx = boundaryCurve.GetBoundingBox(Plane.WorldXY);
Point3d[] bxPT = bx.GetCorners();
Vector3d outsideVector = bxPT[0] - bxPT[2];
outsideVector.Unitize();
Point3d outsidePT = bxPT[0] + outsideVector;
Curve[] offsetBoundary = boundaryCurve.Offset(outsidePT, Vector3d.ZAxis, -localRules.BoothDepth, 0.01, CurveOffsetCornerStyle.Sharp);
//Sometimes offset fails. This checks for that and uses alternative method, less precise method
if (offsetBoundary[0].GetLength() < (localRules.BoothDepth * 2) + Math.Sqrt((Math.Pow(localRules.BoothDepth, 2) * 2)) + 1)
{
offsetBoundary = boundaryCurve.Offset(Plane.WorldXY, localRules.BoothDepth, 0.01, CurveOffsetCornerStyle.Sharp);
//Check direction
if (offsetBoundary[0].Contains(boundaryCurve.PointAtStart, Plane.WorldXY, 0.01) == PointContainment.Inside)
{
offsetBoundary = boundaryCurve.Offset(Plane.WorldXY, -localRules.BoothDepth, 0.01, CurveOffsetCornerStyle.Sharp);
}
}
List <Curve> explodeOffsetBoundary = new List <Curve>();
foreach (var curve in offsetBoundary)
{
if (curve is PolylineCurve)
{
explodeOffsetBoundary.AddRange(curve.DuplicateSegments());
}
else
{
explodeOffsetBoundary.Add(curve);
}
}
Curve[] offsetBoundaryjoined;
if (offsetBoundary.Length > 2)
{
offsetBoundaryjoined = Curve.JoinCurves(offsetBoundary, 0.5);
}
else
{
offsetBoundaryjoined = offsetBoundary;
}
//Make Outer parkingplots
foreach (var curve in explodeOffsetBoundary)
{
List <Parkingspace> tempSpaces = new List <Parkingspace>();
double[] divpar = curve.DivideByLength(localRules.BoothWidth, true, false, out Point3d[] points);
//Create Booths
for (int i = 0; i < points.Length; i++)
{
Vector3d Dir = curve.TangentAt(divpar[i]);
Dir.Rotate(Math.PI / 2, Vector3d.ZAxis);
Dir.Unitize();
if (boundaryCurve.ClosedCurveOrientation() == CurveOrientation.CounterClockwise)
{
Dir.Reverse();
}
Dir = Vector3d.Multiply(localRules.BoothDepth, Dir);
// Create new parking
Plane boothPlane = new Plane(points[i], curve.TangentAt(divpar[i]), Dir);
Parkingspace parkingspace = new Parkingspace(boothPlane, localRules, false);
tempSpaces.Add(parkingspace);
}
List <int> spacesToCull = new List <int>();
// Check if Parkinglot fullfill criterias
if (boundaryCurve.IsPeriodic != true)
{
for (int j = 0; j < tempSpaces.Count; j++)
{
Curve boxCurves = tempSpaces[j].ManeuveringBox.ToNurbsCurve();
//Check for maneuveringarea
if (Intersection.CurveCurve(offsetBoundaryjoined[0], boxCurves, 0.0, 0.001).Count > 1)
{
spacesToCull.Add(j);
continue;
}
//Check if booths exceed the ends
if (offsetBoundaryjoined[0].Contains(tempSpaces[j].Curves.PointAtStart, plane, 0.001) != PointContainment.Coincident)
{
spacesToCull.Add(j);
continue;
}
if (offsetBoundaryjoined[0].Contains(tempSpaces[j].Curves.PointAtEnd, plane, 0.001) != PointContainment.Coincident)
{
spacesToCull.Add(j);
continue;
}
}
//Check if end booths overlap >180 degress corners
for (int i = 5; i < (tempSpaces.Count); i++)
{
if (spacesToCull.Contains(i))
{
continue;
}
if (boundaryCurve.Contains(tempSpaces[i].Curves.PointAtLength(localRules.BoothDepth), Plane.WorldXY, 0.001) != PointContainment.Coincident)
{
spacesToCull.Add(i);
continue;
}
if (boundaryCurve.Contains(tempSpaces[i].Curves.PointAtLength(tempSpaces[i].Curves.GetLength() - localRules.BoothDepth), Plane.WorldXY, 0.001) != PointContainment.Coincident)
{
spacesToCull.Add(i);
continue;
}
}
}
//Remove Parkinglots that doesn't fullfill criterias
spacesToCull.Sort();
spacesToCull.Reverse();
foreach (int index in spacesToCull)
{
tempSpaces.RemoveAt(index);
}
Spaces.AddRange(tempSpaces);
}
}
//Create inner Parkinglots
private void CreateInnerParkinglots(Curve boundaryCurve, LocalRules localRules, Plane plane)
{
//Create offset curve with outer booth and driveway distance
BoundingBox bx = boundaryCurve.GetBoundingBox(Plane.WorldXY);
Point3d[] bxPT = bx.GetCorners();
Vector3d outsideVector = bxPT[0] - bxPT[2];
outsideVector.Unitize();
Point3d outsidePT = bxPT[0] + outsideVector;
Curve[] innerBounderyCrv = boundaryCurve.Offset(outsidePT, Vector3d.ZAxis, -(localRules.BoothDepth + localRules.ManeuveringArea), 0.5, CurveOffsetCornerStyle.Sharp);
//Sometimes offset fails. This checks for that and uses alternative method, less precise method
if (innerBounderyCrv[0].GetLength() < ((localRules.BoothDepth + localRules.ManeuveringArea) * 2) + Math.Sqrt((Math.Pow(localRules.BoothDepth + localRules.ManeuveringArea, 2) * 2)) + 1)
{
innerBounderyCrv = boundaryCurve.Offset(Plane.WorldXY, localRules.BoothDepth + localRules.ManeuveringArea, 0.01, CurveOffsetCornerStyle.Sharp);
//Check direction
if (innerBounderyCrv[0].Contains(boundaryCurve.PointAtStart, Plane.WorldXY, 0.01) == PointContainment.Inside)
{
innerBounderyCrv = boundaryCurve.Offset(Plane.WorldXY, -(localRules.BoothDepth + localRules.ManeuveringArea), 0.01, CurveOffsetCornerStyle.Sharp);
}
}
debug.AddRange(innerBounderyCrv);
//Create BB and centerlines
innerBounderyCrv[0].GetBoundingBox(plane, out Box boundarybox);
Point3d[] boxCorners = boundarybox.GetCorners();
Line startLine = new Line(boxCorners[0], boxCorners[1]);
Line endLine = new Line(boxCorners[3], boxCorners[2]);
// Direction of inner booths
Vector3d boothDir = startLine.UnitTangent;
boothDir.Unitize();
boothDir = Vector3d.Multiply(localRules.BoothDepth, boothDir);
//Copy center lines according to distancerules
List <Curve> copyLines = new List <Curve>();
for (double i = localRules.BoothDepth; i < startLine.Length;)
{
Point3d startPT = startLine.PointAtLength(i);
Point3d endPT = endLine.PointAtLength(i);
copyLines.Add(new Line(startPT, endPT).ToNurbsCurve());
i = i + (localRules.BoothDepth * 2) + localRules.ManeuveringArea;
}
//Find inner curves
foreach (Curve crvline in copyLines)
{
var curveEvent = Intersection.CurveCurve(innerBounderyCrv[0], crvline, 0, 0);
if (curveEvent != null)
{
List <double> curveT = new List <double>();
for (int i = 0; i < curveEvent.Count; i++)
{
var crvLine = curveEvent[i];
curveT.Add(crvLine.ParameterB);
}
Curve[] curveSplit = crvline.Split(curveT);
foreach (Curve curve in curveSplit)
{
double midT = (curve.Domain.T0 + curve.Domain.T1) / 2;
if (innerBounderyCrv[0].Contains(curve.PointAt(midT), Plane.WorldXY, 0).Equals(PointContainment.Inside))
{
CenterLines.Add(curve);
}
}
}
}
//Parking Booths
foreach (Curve curve in CenterLines)
{
curve.DivideByLength(localRules.BoothWidth, true, false, out Point3d[] points);
if (points == null)
{
continue;
}
foreach (Point3d point in points)
{
//One way
Plane boothPlane = new Plane(point, curve.TangentAt(0.1), boothDir);
Parkingspace parkingspace = new Parkingspace(boothPlane, localRules, true);
parkingLinesLeft.Add(parkingspace);
//Opposite way
boothDir.Reverse();
boothPlane = new Plane(point, curve.TangentAt(0.1), boothDir);
parkingspace = new Parkingspace(boothPlane, localRules, true);
parkingLinesLeft.Add(parkingspace);
//Return Vector
boothDir.Reverse();
}
PointCloud startPTsLeft = new PointCloud();
PointCloud startPTsRight = new PointCloud();
PointCloud allStartPT = new PointCloud();
//Check for collision with driving path
List <Parkingspace> finalParkingLinesLeft = new List <Parkingspace>();
List <Parkingspace> finalParkingLinesRight = new List <Parkingspace>();
for (int i = 0; i < parkingLinesLeft.Count; i++)
{
CurveIntersections crvEvent = Intersection.CurveCurve(innerBounderyCrv[0], parkingLinesLeft[i].Curves, 0.0001, 0.0000);
if (crvEvent.Count > 0)
{
parkingEnds.Add(parkingLinesLeft[i].Curves);
}
else
{
finalParkingLinesLeft.Add(parkingLinesLeft[i]);
startPTsLeft.Add(parkingLinesLeft[i].Curves.PointAtStart);
allStartPT.Add(parkingLinesLeft[i].Curves.PointAtStart);
}
}
for (int i = 0; i < parkingLinesRight.Count; i++)
{
CurveIntersections crvEvent = Intersection.CurveCurve(innerBounderyCrv[0], parkingLinesRight[i].Curves, 0.0001, 0.0000);
if (crvEvent.Count > 0)
{
parkingEnds.Add(parkingLinesRight[i].Curves);
}
else
{
finalParkingLinesRight.Add(parkingLinesRight[i]);
startPTsRight.Add(parkingLinesRight[i].Curves.PointAtStart);
allStartPT.Add(parkingLinesRight[i].Curves.PointAtStart);
}
}
//try
//{
// //Fix one end
// Point3d crvEnd = curve.PointAtEnd;
// Curve endCurve = createEnds(innerBounderyCrv, startPTsLeft, startPTsRight, finalParkingLinesLeft, finalParkingLinesRight, crvEnd);
// notParkingSpaces.Add(endCurve);
// Curve splitCurveOne = splitend(curve, allStartPT, crvEnd);
// //Fix the other end
// Point3d crvStart = curve.PointAtStart;
// endCurve = createEnds(innerBounderyCrv, startPTsLeft, startPTsRight, finalParkingLinesLeft, finalParkingLinesRight, crvStart);
// notParkingSpaces.Add(endCurve);
// notParkingSpaces.Add(splitend(splitCurveOne, allStartPT, crvStart));
//}
//catch
//{
//}
Spaces.AddRange(finalParkingLinesLeft);
Spaces.AddRange(finalParkingLinesRight);
parkingLinesLeft.Clear();
parkingLinesRight.Clear();
}
parkingspaceNO = Spaces.Count;
}
