/// <summary>
/// Performs the playback of actions in this module.
/// </summary>
/// <remarks>You should not call this method directly, instead pass the module
/// instance to the <see cref="TestModuleRunner.Run(ITestModule)"/> method
/// that will in turn invoke this method.</remarks>
void ITestModule.Run()
{
Mouse.DefaultMoveTime = 300;
Keyboard.DefaultKeyPressTime = 100;
Delay.SpeedFactor = 1.0;
RanorexRepository repo = new RanorexRepository();
fnParseSwitches ParseSwitches = new fnParseSwitches();
// Get default scenario list
// - use DefaultScenarioList.txt for all but last register
// - use DefaultIterationsLastRegister.txt for the last register in a store
string DefaultIterations = "1";
string NumberIterations = "";
// if( Global.RegisterNumber == "4" || ( Global.RegisterName == "USA04285-3" )
// )
// NumberIterations = "DefaultIterationsLastRegister.txt";
// else
NumberIterations = "DefaultIterations.txt";
try
{
// Read in the default iterations from Register 1 \Ranorex Automation\DefaultInterations.txt
using (System.IO.StreamReader RegisterIniFileGet = new System.IO.StreamReader(Global.Register1DriveLetter + @":\" + Global.AutomationFileDirectory + @"\" + NumberIterations))
{
DefaultIterations = RegisterIniFileGet.ReadLine();
RegisterIniFileGet.Close();
}
}
catch
{
// Write out default iterations to Register 1 \Ranorex Automation\DefaultInterations.txt
using (System.IO.StreamWriter RegisterIniFilePut = new System.IO.StreamWriter(Global.Register1DriveLetter + @":\" + Global.AutomationFileDirectory + @"\" + NumberIterations))
{
RegisterIniFilePut.WriteLine("1");
RegisterIniFilePut.Close();
}
}
string TextInput;
string Prompt = "Enter number of iterations\n" +
" or time to stop like HH:MM PM\n" +
" or time to start & stop like HH:MM AM to HH:MM PM\n\n" +
"Or /U for metric upload only\n\n" +
"Switches: put comma in front of switches #,/Q\n" +
" P=Pause between scenarios off\n" +
" N=Phone Numbers NonLoyalty\n" +
" L=Phone Numbers Loyalty\n" +
" A=All Registers use all Phone Numbers\n" +
" M=Metrics file create when no save them\n" +
" Q=Quit running when get error";
string IDLine = " (TestID: " + Global.Test_ID + ", " + "RegID: " + Global.Register_ID + ", " + "VerID: " + Global.AutoVer_ID + ") ";
if (Global.AutoRun)
{
if (Global.CommandLineArg2 != "")
{
TextInput = Global.CommandLineArg2;
}
else
{
TextInput = DefaultIterations;
}
}
else
{
InputBoxResult BoxInput = InputBox.Show(Prompt, "Iterations" + IDLine, DefaultIterations);
if (BoxInput.ReturnCode == DialogResult.Cancel)
{
Environment.Exit(0);
} // Exit if cancel pressed
TextInput = BoxInput.Text.ToUpper();
Global.IterationsText = TextInput;
}
Global.TimeToStartExecution = "";
Global.TimeToStopExecution = "";
// Check for Upload Metrics Only
string[] PromptItems = TextInput.Split(',');
if (PromptItems[0].Substring(0, 1) == "/")
{
if (PromptItems[0].Substring(0, 2) == "/U")
{
ParseSwitches.Run(PromptItems[0]);
}
}
else
{
if (TextInput.Contains(":"))
{
if (TextInput.Contains(" TO "))
{
int ToOffset = TextInput.IndexOf(" TO ");
Global.TimeToStartExecution = TextInput.Substring(0, ToOffset);
Global.TimeToStopExecution = TextInput.Substring(ToOffset + 4);
}
else
{
Global.TimeToStopExecution = TextInput;
}
Global.IterationsToDo = -1;
}
else
{
Global.IterationsToDo = Convert.ToInt32(PromptItems[0]);
}
// Check for given switches
if (PromptItems.Length > 1)
{
if (PromptItems[1].Substring(0, 1) == "/")
{
ParseSwitches.Run(PromptItems[1]);
}
}
// Write out default iterations to Register 1 \Ranorex Automation\DefaultInterations.txt
using (System.IO.StreamWriter RegisterIniFilePut = new System.IO.StreamWriter(Global.Register1DriveLetter + @":\" + Global.AutomationFileDirectory + @"\" + NumberIterations))
{
RegisterIniFilePut.WriteLine(TextInput);
RegisterIniFilePut.Close();
}
}
}
/// <summary>
/// Performs the playback of actions in this module.
/// </summary>
/// <remarks>You should not call this method directly, instead pass the module
/// instance to the <see cref="TestModuleRunner.Run(ITestModule)"/> method
/// that will in turn invoke this method.</remarks>
void ITestModule.Run()
{
if (!Global.SwitchUploadOnly)
{
Mouse.DefaultMoveTime = 300;
Keyboard.DefaultKeyPressTime = 100;
Delay.SpeedFactor = 1.0;
RanorexRepository repo = new RanorexRepository();
fnParseSwitches ParseSwitches = new fnParseSwitches();
fnWriteToErrorFile WriteToErrorFile = new fnWriteToErrorFile();
fnPlayWavFile PlayWavFile = new fnPlayWavFile();
// Get default scenario list
// - use DefaultScenarioList.txt for all but last register
// - use DefaultScenarioListLastRegister.txt for the last register in a store
string ListToUse = "";
string DefaultScenarios = "13,16,18,19,20,33,34,36,37,41,42,43,47";
// if( Global.RegisterNumber == "4" || ( Global.RegisterName == "USA04285-3" )
// )
// ListToUse = "DefaultScenarioListLastRegister.txt";
// else
ListToUse = "DefaultScenarioList.txt";
try
{
// Read in the default Scenario List from Register 1 \Ranorex Automation\DefaultScenarioList.txt
using (System.IO.StreamReader RegisterScenarioFileGet = new System.IO.StreamReader(Global.Register1DriveLetter + @":\" + Global.AutomationFileDirectory + @"\" + ListToUse))
{
DefaultScenarios = RegisterScenarioFileGet.ReadLine();
RegisterScenarioFileGet.Close();
}
}
catch
{
// Write out default Scenario List to Register 1 \Ranorex Automation\DefaultScenarioList.txt
using (System.IO.StreamWriter RegisterScenarioFilePut = new System.IO.StreamWriter(Global.Register1DriveLetter + @":\" + Global.AutomationFileDirectory + @"\" + ListToUse))
{
RegisterScenarioFilePut.WriteLine(DefaultScenarios);
RegisterScenarioFilePut.Close();
}
}
string TextInput;
string Prompt = "Enter list of scenarios like 3,5-7,/LX\n\n" +
"Back Office ---------------------------------------------------\n" +
"Scenario 13: eMail\n" +
"Scenario 14: Performance Dashboard\n" +
"Scenario 15: Performance Dashboard Loop without exiting\n" +
"Scenario 18: Transaction Journal\n" +
"Scenario 19: Cover Art\n" +
"Scenario 20: HR Workday Employee List\n" +
"Scenario 21: WIS Web-In-Store\n\n" +
"RETECH --------------------------------------------------------\n" +
"Scenario 16: Returns\n" +
"Scenario 33: Simple One SKU Cash\n" +
"Scenario 34: Simple One SKU Credit\n" +
"Scenario 36: Item Search\n" +
"Scenario 37: Reserve Pickup\n" +
"Scenario 38: Suspend Resume\n" +
"Scenario 41: GPG\n" +
"Scenario 42: PRP\n" +
"Scenario 43: Card Balance\n" +
"Scenario 47: Purchase 1 SKU with 5 trades and cach back\n\n" +
"Other --------------------------------------------------------\n" +
"Scenario 50: Dashboard data init (about 20 minutes)\n\n" +
"Switches: put comma in front of switches 2-4,7,/NXS\n" +
" N=Phone Numbers NonLoyalty\n" +
" L=Phone Numbers Loyalty\n" +
" A=All Registers use all Phone Numbers\n" +
" X=Skip Customer Lookup (NO 4,7,17,20-23,25)\n" +
" M=Metrics file create when no save them\n" +
" Q=Quit running when get error\n" +
" S=Scenario 9 use 40 SKUs";
if (Global.AutoRun)
{
if (Global.CommandLineArg3 != "")
{
TextInput = Global.CommandLineArg3;
}
else
{
TextInput = DefaultScenarios;
}
}
else
{
InputBoxResult BoxInput = InputBox.Show(Prompt, "Scenarios", DefaultScenarios);
if (BoxInput.ReturnCode == DialogResult.Cancel)
{
Environment.Exit(0);
} // Exit if cancel pressed
TextInput = BoxInput.Text.ToUpper();
}
// Write out default Scenario List to Register 1 \Ranorex Automation\DefaultScenarioList.txt
using (System.IO.StreamWriter RegisterScenarioFilePut = new System.IO.StreamWriter(Global.Register1DriveLetter + @":\" + Global.AutomationFileDirectory + @"\" + ListToUse))
{
RegisterScenarioFilePut.WriteLine(TextInput);
RegisterScenarioFilePut.Close();
}
// Remove all spaces from the input
TextInput = TextInput.Replace(" ", System.String.Empty);
// Set flag if just Scenario 32 is selected - it consumes card numbers - so cannot run as part of normal run
if (TextInput == "32")
{
Global.JustScenario32 = true;
}
// Clear the DoScenarioFlag array
for (int Offset = 0; Offset <= Global.MaxScenarioNumber; Offset++)
{
Global.DoScenarioFlag[Offset] = false;
}
string[] PromptItems = TextInput.Split(',');
string TempText;
int PromptItemsCount = PromptItems.Length;
int ParseOffset;
for (ParseOffset = 0; ParseOffset <= PromptItemsCount - 1; ParseOffset++)
{
TempText = PromptItems[ParseOffset];
ParseSwitches.Run(TempText);
}
// If you can connect to the PALDB then provide the option to upload the test.
var connection = new SqlConnection(ConfigurationManager.ConnectionStrings["MetricsRepository"].ConnectionString);
try
{
Report.Log(ReportLevel.Info, "fnGetScenariosToRun", "Open connection to DB", new RecordItemIndex(0));
connection.Open();
connection.Close();
var mSystemInfo = new FnSystemInfo();
TestModuleRunner.Run(mSystemInfo);
}
catch (Exception e)
{
Global.IsPerformanceTest = false;
Global.DBAvailable = false;
string sayString = "";
if (e.ToString().IndexOf("Thread was being aborted.") == -1)
{
sayString = e.ToString().Substring(0, 28);
Global.TempErrorString = "Cannot connect to Metric DB: " + e.Message;
WriteToErrorFile.Run();
//MessageBox.Show(e.ToString(),Global.TempErrorString);
}
}
}
}
