public void MonitorDefaultActions()
{
//print("2a");
if (EditorActionGroups.Instance.GetSelectedParts() != null) //is a part selected?
{
if (EditorActionGroups.Instance.GetSelectedParts().Count > 0) //list can exist with no parts in it if you selected then unselect one
{
if(SelectedWithSym.Count == 0 || SelectedWithSym.First() != EditorActionGroups.Instance.GetSelectedParts().First()) //check if there is a previously selected part, if so check if its changed
{
//print("2b");
//parts are different
SelectedWithSym.Clear(); //reset lastpart list
SelectedWithSym.AddRange(EditorActionGroups.Instance.GetSelectedParts());
SelectedWithSym.AddRange(EditorActionGroups.Instance.GetSelectedParts().First().symmetryCounterparts);
SelectedWithSymActions.Clear(); //reset actions list
//print("2c");
foreach (Part prt in SelectedWithSym)
{
// print("2d");
foreach (BaseAction bap in prt.Actions) //get part actions
{
SelectedWithSymActions.Add(new AGXDefaultCheck() { ba = bap, agrp = bap.actionGroup }); //add actiongroup separate otherwise it links and so have nothing to compare
}
foreach (PartModule pm in prt.Modules) //add actions from all partmodules
{
foreach (BaseAction bapm in pm.Actions)
{
SelectedWithSymActions.Add(new AGXDefaultCheck() { ba = bapm, agrp = bapm.actionGroup });
}
}
}
// print("2e");
}
else //selected part is the same a previously selected part
{
// print("2f");
List<Part> PartsThisFrame = new List<Part>(); //get list of parts this update frame
PartsThisFrame.AddRange(EditorActionGroups.Instance.GetSelectedParts());
PartsThisFrame.AddRange(EditorActionGroups.Instance.GetSelectedParts().First().symmetryCounterparts);
// print("2g");
List<BaseAction> ThisFrameActions = new List<BaseAction>(); //get actions fresh again this update frame
foreach (Part prt in PartsThisFrame)
{
// print("2h");
foreach (BaseAction bap in prt.Actions)
{
ThisFrameActions.Add(bap);
}
foreach (PartModule pm in prt.Modules)
{
foreach (BaseAction bapm in pm.Actions)
{
ThisFrameActions.Add(bapm);
}
}
}
//print("2i");
foreach (BaseAction ba2 in ThisFrameActions) //check each action's actiongroup enum against last update frames actiongroup enum
{
//print("2j");
AGXDefaultCheck ActionLastFrame = new AGXDefaultCheck();
//print("2j1");
ActionLastFrame = SelectedWithSymActions.Find(a => a.ba == ba2);
// print("2j2");
if (ActionLastFrame.agrp != ba2.actionGroup) //actiongroup enum is different
{
// print("2j3");
int NewGroup = 0; //which actiongroup changed?
if (KSPActionGroup.Custom01 == (ActionLastFrame.agrp ^ ba2.actionGroup))
{
NewGroup = 1;
}
else if (KSPActionGroup.Custom02 == (ActionLastFrame.agrp ^ ba2.actionGroup))
{
NewGroup = 2;
}
else if (KSPActionGroup.Custom03 == (ActionLastFrame.agrp ^ ba2.actionGroup))
{
NewGroup = 3;
}
else if (KSPActionGroup.Custom04 == (ActionLastFrame.agrp ^ ba2.actionGroup))
{
NewGroup = 4;
}
else if (KSPActionGroup.Custom05 == (ActionLastFrame.agrp ^ ba2.actionGroup))
{
NewGroup = 5;
}
else if (KSPActionGroup.Custom06 == (ActionLastFrame.agrp ^ ba2.actionGroup))
{
NewGroup = 6;
}
else if (KSPActionGroup.Custom07 == (ActionLastFrame.agrp ^ ba2.actionGroup))
{
NewGroup = 7;
}
else if (KSPActionGroup.Custom08 == (ActionLastFrame.agrp ^ ba2.actionGroup))
{
NewGroup = 8;
}
else if (KSPActionGroup.Custom09 == (ActionLastFrame.agrp ^ ba2.actionGroup))
{
NewGroup = 9;
}
else if (KSPActionGroup.Custom10 == (ActionLastFrame.agrp ^ ba2.actionGroup))
{
NewGroup = 10;
}
// print("2k");
if (NewGroup != 0) //if one of the other actiongroups (gear, lights) has changed, ignore it. newgroup will be the actiongroup if I want to process it.
{
AGXAction ToAdd = new AGXAction() { prt = ba2.listParent.part, ba = ba2, group = NewGroup, activated = false };
List<AGXAction> Checking = new List<AGXAction>();
Checking.AddRange(CurrentVesselActions);
Checking.RemoveAll(p => p.group != ToAdd.group);
Checking.RemoveAll(p => p.prt != ToAdd.prt);
Checking.RemoveAll(p => p.ba != ToAdd.ba);
if (Checking.Count == 0)
{
CurrentVesselActions.Add(ToAdd);
//SaveCurrentVesselActions();
}
}
ActionLastFrame.agrp = KSPActionGroup.None;
ActionLastFrame.agrp = ActionLastFrame.agrp | ba2.actionGroup;
// print("2l");
}
}
SelectedWithSymActions.Clear(); //reset actions list as one of the enums changed.
// print("2k");
foreach (Part prt in SelectedWithSym)
{
foreach (BaseAction bap in prt.Actions) //get part actions
{
SelectedWithSymActions.Add(new AGXDefaultCheck() { ba = bap, agrp = bap.actionGroup }); //add actiongroup separate otherwise it links and so have nothing to compare
}
foreach (PartModule pm in prt.Modules) //add actions from all partmodules
{
foreach (BaseAction bapm in pm.Actions)
{
SelectedWithSymActions.Add(new AGXDefaultCheck() { ba = bapm, agrp = bapm.actionGroup });
}
}
}
}
}
}
// print("2l");
}
public void MonitorDefaultActions()
{
//print("AGX Monitor default start " + StaticData.CurrentVesselActions.Count());
KSPActionGroup KSPDefaultActionGroupThisFrame = KSPActionGroup.Custom01;
try //find which action group is selected in default ksp editor this pass
{
string grpText = "None";
for (int i = 0; i < EditorActionGroups.Instance.actionGroupList.Count; i++)
{
IUIListObject lObj = EditorActionGroups.Instance.actionGroupList.GetItem(i);
UIListItem LstItem = (UIListItem)lObj;
if (LstItem.controlState == UIButton.CONTROL_STATE.ACTIVE)
{
grpText = LstItem.Text;
}
}
KSPDefaultActionGroupThisFrame = (KSPActionGroup)Enum.Parse(typeof(KSPActionGroup), grpText);
//print("Selected group " + KSPDefaultLastActionGroup);
}
catch
{
print("AGX Monitor default list fail");
}
string errLine = "1";
try
{
errLine = "2";
if (EditorActionGroups.Instance.GetSelectedParts() != null) //is a part selected?
{
errLine = "3";
if (EditorActionGroups.Instance.GetSelectedParts().Count > 0) //list can exist with no parts in it if you selected then unselect one
{
errLine = "4";
if (SelectedWithSym.Count == 0 || SelectedWithSym.First() != EditorActionGroups.Instance.GetSelectedParts().First() || KSPDefaultActionGroupThisFrame != KSPDefaultLastActionGroup) //check if there is a previously selected part, if so check if its changed
{
errLine = "5";
//print("2b");
//parts are different
SelectedWithSym.Clear(); //reset lastpart list
SelectedWithSym.AddRange(EditorActionGroups.Instance.GetSelectedParts());
SelectedWithSym.AddRange(EditorActionGroups.Instance.GetSelectedParts().First().symmetryCounterparts);
SelectedWithSymActions.Clear(); //reset actions list
//print("2c");
errLine = "6";
foreach (Part prt in SelectedWithSym)
{
// print("2d");
errLine = "7";
foreach (BaseAction bap in prt.Actions) //get part actions
{
SelectedWithSymActions.Add(new AGXDefaultCheck() { ba = bap, agrp = bap.actionGroup }); //add actiongroup separate otherwise it links and so have nothing to compare
}
errLine = "8";
foreach (PartModule pm in prt.Modules) //add actions from all partmodules
{
errLine = "9";
foreach (BaseAction bapm in pm.Actions)
{
errLine = "10";
SelectedWithSymActions.Add(new AGXDefaultCheck() { ba = bapm, agrp = bapm.actionGroup });
}
}
}
errLine = "11";
int groupToAdd = 1;
switch (KSPDefaultActionGroupThisFrame)
{
case KSPActionGroup.Custom01:
groupToAdd = 1;
break;
case KSPActionGroup.Custom02:
groupToAdd = 2;
break;
case KSPActionGroup.Custom03:
groupToAdd = 3;
break;
case KSPActionGroup.Custom04:
groupToAdd = 4;
break;
case KSPActionGroup.Custom05:
groupToAdd = 5;
break;
case KSPActionGroup.Custom06:
groupToAdd = 6;
break;
case KSPActionGroup.Custom07:
groupToAdd = 7;
break;
case KSPActionGroup.Custom08:
groupToAdd = 8;
break;
case KSPActionGroup.Custom09:
groupToAdd = 9;
break;
case KSPActionGroup.Custom10:
groupToAdd = 10;
break;
}
errLine = "12";
foreach (AGXAction agact2 in StaticData.CurrentVesselActions.Where(ag => ag.group == groupToAdd))
{
SelectedWithSymActions.Add(new AGXDefaultCheck() { ba = agact2.ba, agrp = agact2.ba.actionGroup });
}
errLine = "13";
KSPDefaultLastActionGroup = KSPDefaultActionGroupThisFrame;
//foreach (AGXDefaultCheck dC in SelectedWithSymActions)
//{
// print("Acts " + dC.ba.name);
//}
// print("2e");
}
else //selected part is the same a previously selected part
{
errLine = "14";
//print("2f");
List<Part> PartsThisFrame = new List<Part>(); //get list of parts this update frame
PartsThisFrame.AddRange(EditorActionGroups.Instance.GetSelectedParts());
PartsThisFrame.AddRange(EditorActionGroups.Instance.GetSelectedParts().First().symmetryCounterparts);
// print("2g");
List<BaseAction> ThisFrameActions = new List<BaseAction>(); //get actions fresh again this update frame
foreach (Part prt in PartsThisFrame)
{
errLine = "15";
// print("2h");
foreach (BaseAction bap in prt.Actions)
{
ThisFrameActions.Add(bap);
}
errLine = "16";
foreach (PartModule pm in prt.Modules)
{
foreach (BaseAction bapm in pm.Actions)
{
ThisFrameActions.Add(bapm);
}
}
}
errLine = "17";
int groupToAdd = 1;
switch (KSPDefaultActionGroupThisFrame)
{
case KSPActionGroup.Custom01:
groupToAdd = 1;
break;
case KSPActionGroup.Custom02:
groupToAdd = 2;
break;
case KSPActionGroup.Custom03:
groupToAdd = 3;
break;
case KSPActionGroup.Custom04:
groupToAdd = 4;
break;
case KSPActionGroup.Custom05:
groupToAdd = 5;
break;
case KSPActionGroup.Custom06:
groupToAdd = 6;
break;
case KSPActionGroup.Custom07:
groupToAdd = 7;
break;
case KSPActionGroup.Custom08:
groupToAdd = 8;
break;
case KSPActionGroup.Custom09:
groupToAdd = 9;
break;
case KSPActionGroup.Custom10:
groupToAdd = 10;
break;
}
foreach (AGXAction agact2 in StaticData.CurrentVesselActions.Where(ag => ag.group == groupToAdd))
{
ThisFrameActions.Add(agact2.ba);
}
errLine = "18";
//print("2i");
foreach (BaseAction ba2 in ThisFrameActions) //check each action's actiongroup enum against last update frames actiongroup enum, this adds/removes a group to default KSP when added/removed in agx
{
//print("2j");
errLine = "19";
AGXDefaultCheck ActionLastFrame = new AGXDefaultCheck();
//print("2j1");
ActionLastFrame = SelectedWithSymActions.Find(a => a.ba == ba2);
// print("2j2");
errLine = "20";
if (ActionLastFrame.agrp != ba2.actionGroup) //actiongroup enum is different
{
// print("2j3");
int NewGroup = 0; //which actiongroup changed?
if (KSPActionGroup.Custom01 == (ActionLastFrame.agrp ^ ba2.actionGroup))
{
NewGroup = 1;
}
else if (KSPActionGroup.Custom02 == (ActionLastFrame.agrp ^ ba2.actionGroup))
{
NewGroup = 2;
}
else if (KSPActionGroup.Custom03 == (ActionLastFrame.agrp ^ ba2.actionGroup))
{
NewGroup = 3;
}
else if (KSPActionGroup.Custom04 == (ActionLastFrame.agrp ^ ba2.actionGroup))
{
NewGroup = 4;
}
else if (KSPActionGroup.Custom05 == (ActionLastFrame.agrp ^ ba2.actionGroup))
{
NewGroup = 5;
}
else if (KSPActionGroup.Custom06 == (ActionLastFrame.agrp ^ ba2.actionGroup))
{
NewGroup = 6;
}
else if (KSPActionGroup.Custom07 == (ActionLastFrame.agrp ^ ba2.actionGroup))
{
NewGroup = 7;
}
else if (KSPActionGroup.Custom08 == (ActionLastFrame.agrp ^ ba2.actionGroup))
{
NewGroup = 8;
}
else if (KSPActionGroup.Custom09 == (ActionLastFrame.agrp ^ ba2.actionGroup))
{
NewGroup = 9;
}
else if (KSPActionGroup.Custom10 == (ActionLastFrame.agrp ^ ba2.actionGroup))
{
NewGroup = 10;
}
// print("2k");
errLine = "21";
if (NewGroup != 0) //if one of the other actiongroups (gear, lights) has changed, ignore it. newgroup will be the actiongroup if I want to process it.
{
// print("Newgroup called on " + NewGroup);
errLine = "22";
if (Mouse.screenPos.x >= 130 && Mouse.screenPos.x <= 280)
{
//print("remove actions");
//AGXAction ToRemove = new AGXAction() { prt = ba2.listParent.part, ba = ba2, group = NewGroup, activated = false };
StaticData.CurrentVesselActions.RemoveAll(ag3 => ag3.ba == ba2 && ag3.group == NewGroup);
}
else
{
errLine = "23";
//print("add actions");
AGXAction ToAdd = new AGXAction() { prt = ba2.listParent.part, ba = ba2, group = NewGroup, activated = false };
List<AGXAction> Checking = new List<AGXAction>();
Checking.AddRange(StaticData.CurrentVesselActions);
Checking.RemoveAll(p => p.group != ToAdd.group);
Checking.RemoveAll(p => p.prt != ToAdd.prt);
Checking.RemoveAll(p => p.ba != ToAdd.ba);
if (Checking.Count == 0)
{
StaticData.CurrentVesselActions.Add(ToAdd);
//SaveCurrentVesselActions();
}
}
}
errLine = "24";
ActionLastFrame.agrp = KSPActionGroup.None;
ActionLastFrame.agrp = ActionLastFrame.agrp | ba2.actionGroup;
//print("2l");
}
}
SelectedWithSymActions.Clear(); //reset actions list as one of the enums changed.
//print("2k");
errLine = "25";
foreach (Part prt in SelectedWithSym)
{
errLine = "26";
foreach (BaseAction bap in prt.Actions) //get part actions
{
SelectedWithSymActions.Add(new AGXDefaultCheck() { ba = bap, agrp = bap.actionGroup }); //add actiongroup separate otherwise it links and so have nothing to compare
}
errLine = "27";
foreach (PartModule pm in prt.Modules) //add actions from all partmodules
{
foreach (BaseAction bapm in pm.Actions)
{
SelectedWithSymActions.Add(new AGXDefaultCheck() { ba = bapm, agrp = bapm.actionGroup });
}
}
}
errLine = "28";
foreach (AGXAction agact2 in StaticData.CurrentVesselActions.Where(ag => ag.group == groupToAdd))
{
SelectedWithSymActions.Add(new AGXDefaultCheck() { ba = agact2.ba, agrp = agact2.ba.actionGroup });
}
errLine = "29";
}
}
}
//print("AGX Monitor default end " + StaticData.CurrentVesselActions.Count());
}
catch (Exception e)
{
Debug.Log("AGX Monitor Default Actions Error " + errLine + " " + e);
}
//print("2l " + Mouse.screenPos);
}