public static bool isIsolatedPoint(zzPoint pPoint,zzActiveChart tex)
{
var lDetectDirection = new DetectDirection();
var lNextPoint = lDetectDirection.getOfsetPoint(pPoint);
//下一个像素是否可用
var isNextActivePiexl = tex.isInside(lNextPoint) && tex.isActive(lNextPoint);
var lNextNextPoint = new zzPoint();
bool isNextNextActivePiexl;
for (int i = 0; i < 8;++i )
{
lDetectDirection.toNextDirection();
//下下个像素是否可用
lNextNextPoint = lDetectDirection.getOfsetPoint(pPoint);
isNextNextActivePiexl = tex.isInside(lNextNextPoint)&&tex.isActive(lNextNextPoint);
//连续两个像素可用,则此像素非孤立
if(isNextActivePiexl && isNextNextActivePiexl)
return false;
isNextActivePiexl = isNextNextActivePiexl;
}
return true;
}
public static Texture2D pick(int[,] pPatternMark,int pPickPatternID,
Texture2D pSource, zzPointBounds pBounds, zzPoint pOutSize)
{
Texture2D lOut = new Texture2D(pOutSize.x, pOutSize.y, TextureFormat.ARGB32, false);
var lMin = pBounds.min;
var lMax = pBounds.max;
var lDrawOffset = -lMin;
for (int lY = lMin.y; lY < lMax.y; ++lY)
{
var lDrawedPointY = lY + lDrawOffset.y;
for (int lX = lMin.x; lX < lMax.x; ++lX)
{
var lColor = pPatternMark[lX, lY] == pPickPatternID
? pSource.GetPixel(lX, lY) : Color.clear;
lOut.SetPixel(lX + lDrawOffset.x, lDrawedPointY, lColor);
}
for (int i = lMax.x+lDrawOffset.x; i < lOut.width; ++i)
{
lOut.SetPixel(i, lDrawedPointY, Color.clear);
}
}
for (int lY = lMax.y + lDrawOffset.y; lY < lOut.height; ++lY)
{
for (int lX = 0; lX < lOut.width; ++lX)
lOut.SetPixel(lX, lY, Color.clear);
}
lOut.Apply();
return lOut;
}
public void encapsulate(zzPoint point)
{
mMax.x = Mathf.Max(mMax.x, point.x);
mMax.y = Mathf.Max(mMax.y, point.y);
mMin.x = Mathf.Min(mMin.x, point.x);
mMin.y = Mathf.Min(mMin.y, point.y);
}
public zzPointBounds(zzPoint[] points)
{
mMin = points[0];
mMax = points[0];
for (int i = 1; i < points.Length;++i )
{
encapsulate(points[i]);
}
}
public zzPointBounds(zzPointBounds other)
{
mMin = other.mMin;
mMax = other.mMax;
}
public zzPointBounds(zzPoint point)
{
mMin = point;
mMax = point;
}
public void setActive(zzPoint pPoint, bool pActive)
{
setActive(pPoint.x, pPoint.y, pActive);
}
public bool isInside(zzPoint pPoint)
{
return isInside(pPoint.x, pPoint.y);
}
static float distance(zzPoint p1, zzPoint p2)
{
return Mathf.Sqrt(sqrDistance(p1, p2));
}
public static zzPoint operator -(zzPoint p1, zzPoint p2)
{
zzPoint lPoint = new zzPoint(p1.x - p2.x, p1.y - p2.y);
return lPoint;
}
public zzPoint getOfsetPoint(zzPoint pPoint)
{
return new zzPoint(pPoint.x+x,pPoint.y+y);
}
// 返回两点之间的距离平方
static float sqrDistance(zzPoint p1, zzPoint p2)
{
return (float)((p1.x - p2.x) * (p1.x - p2.x) + (p1.y - p2.y) * (p1.y - p2.y));
}
static zzPoint[] simplifyCircleLine(zzPoint[] pLine, float ignoreDistance)
{
List<zzPoint> lOut = new List<zzPoint>();
lOut.Capacity = pLine.Length/2;
List<zzPoint> lStraightLine = new List<zzPoint>();
lStraightLine.Capacity = pLine.Length/2;
lOut.Add(pLine[0]);
lStraightLine.Add(pLine[0]);
lStraightLine.Add(pLine[1]);
for (int i = 2; i < pLine.Length;++i )
{
//zzPoint lPoint = pLine[i];
//if (lStraightLine.Count == 1)
//{
// lStraightLine.Add(lPoint);
//}
//else
//{
zzPoint lPoint = pLine[i];
lStraightLine.Add(lPoint);
if (!isStraight(lStraightLine, ignoreDistance))
{
//Debug.Log(lStraightLine.Count);
zzPoint lEndPoint = lStraightLine[lStraightLine.Count - 2];
lOut.Add(lEndPoint);
lStraightLine.Clear();
lStraightLine.Add(lEndPoint);
lStraightLine.Add(lPoint);
}
}
lStraightLine.Add(pLine[pLine.Length - 1]);
if (!isStraight(lStraightLine, ignoreDistance))
lOut.Add(pLine[pLine.Length - 1]);
return lOut.ToArray();
}
static Vector2[] getFloatSimplifyLine(zzPoint[] pLine, float ignoreDistance)
{
pLine = simplifyCircleLine(pLine, ignoreDistance);
Vector2[] lOut = new Vector2[pLine.Length];
for (int i = 0; i < pLine.Length;++i )
{
lOut[pLine.Length-i-1] = new Vector2(pLine[i].x, pLine[i].y);
}
return lOut;
}
// a和b是线段的两个端点， c是检测点
//static float sqrDistanceLine(zzPoint a, zzPoint b, zzPoint c) // a和b是线段的两个端点， c是检测点
//{
// zzPoint ab = b - a;
// zzPoint ac = c - a;
// int f = ab.x * ac.x + ab.y * ac.y;
// if (f < 0)
// {
// //Debug.LogError("f < 0 ");
// //Debug.LogError(""+a+"; "+b+"; "+c);
// return sqrDistance(a, c);
// }
// int d = ab.x * ab.x + ab.y + ab.y;
// if (f > d)
// {
// //Debug.LogError(" f > 0 ");
// //Debug.LogError("" + a + "; " + b + "; " + c);
// return sqrDistance(b, c);
// }
// f /= d;
// zzPoint D;
// D.x = a.x + f * ab.x; // c在ab线段上的投影点
// D.y = a.y + f * ab.y;
// return sqrDistance(a, D);
//}
static float distance(zzPoint PA, zzPoint PB, zzPoint P3)
{
float a, b, c;
a = distance(PB, P3);
if (a <= 0.00001)
return 0.0f;
b = distance(PA, P3);
if (b <= 0.00001)
return 0.0f;
c = distance(PA, PB);
if (c <= 0.00001)
return a;//如果PA和PB坐标相同，则退出函数，并返回距离
//------------------------------
if (a * a >= b * b + c * c)//--------图3--------
return b; //如果是钝角返回b
if (b * b >= a * a + c * c)//--------图4-------
return a; //如果是钝角返回a
//图1
float l = (a + b + c) / 2; //周长的一半
float s = Mathf.Sqrt(l * (l - a) * (l - b) * (l - c)); //海伦公式求面积，也可以用矢量求
return 2 * s / c;
}
public override void sweepPicture()
{
pointNumber = 0;
polygonNumber = 0;
holeNumber = 0;
var lPatternResult = zzOutlineSweeper.sweeper(activeChart);
imagePatterns = new Texture2D[lPatternResult.Count];
imagePatternBounds = new zzPointBounds[lPatternResult.Count];
//拾取图块
for (int i = 0; i < lPatternResult.Count; ++i)
{
zzPointBounds lBounds = lPatternResult.sweeperPointResults[i].Bounds;
imagePatternBounds[i] = lBounds;
var lBoundMin = lBounds.min;
var lBoundMax = lBounds.max;
zzPoint lPatternSize = new zzPoint(
Mathf.NextPowerOfTwo(lBoundMax.x - lBoundMin.x + 1),
Mathf.NextPowerOfTwo(lBoundMax.y - lBoundMin.y + 1)
);
imagePatterns[i] = zzImagePatternPicker.pick(lPatternResult.patternMark, i + 1,
picture, lBounds, lPatternSize);
}
//var lSweeperResults = zzOutlineSweeper.sweeper(activeChart, ignoreDistanceInSweeping);
var lSweeperResults = zzOutlineSweeper
.simplifySweeperResult(lPatternResult.sweeperPointResults, ignoreDistanceInSweeping);
modelsSize = new Vector2((float)activeChart.width, (float)activeChart.height);
//存储结果
concaves = new List<zz2DConcave>();
var lNewImagePatterns =new List<Texture2D>(lPatternResult.Count);
var lNewPatternBounds = new List<zzPointBounds>(lPatternResult.Count);
for (int i = 0; i < lSweeperResults.Count; ++i)
{
var lSweeperResult = lSweeperResults[i];
var lImage = imagePatterns[i];
if (lSweeperResult.edge.Length < 2 || lImage.width < 3 || lImage.height<3)
continue;
lNewImagePatterns.Add(lImage);
lNewPatternBounds.Add(imagePatternBounds[i]);
zzSimplyPolygon lPolygon = new zzSimplyPolygon();
lPolygon.setShape(lSweeperResult.edge);
zz2DConcave lConcave = new zz2DConcave();
lConcave.setShape(lPolygon);
++polygonNumber;
foreach (var lHole in lSweeperResult.holes)
{
if (lHole.Length < 2)
continue;
zzSimplyPolygon lHolePolygon = new zzSimplyPolygon();
lHolePolygon.setShape(lHole);
lConcave.addHole(lHolePolygon);
++holeNumber;
}
concaves.Add(lConcave);
}
imagePatterns = lNewImagePatterns.ToArray();
imagePatternBounds = lNewPatternBounds.ToArray();
}
public bool isActive(zzPoint pPoint)
{
return isActive(pPoint.x, pPoint.y);
}
//static bool isInsideImg(zzPoint pPoint,Texture2D tex)
//{
// return pPoint.x >= 0
// && pPoint.x < tex.width
// && pPoint.y >= 0
// && pPoint.y < tex.height;
//}
static zzPoint[] beginEdge(zzActiveChart tex, zzPoint beginPosition, int[,] pProgressdMark, int pMark)
{
List<zzPoint> lOut = new List<zzPoint>();
lOut.Add(beginPosition);
pProgressdMark[beginPosition.x, beginPosition.y] = pMark;
DetectDirection lDetectDirection = new DetectDirection();
//int nowX=beginX,nowY=beginY;
zzPoint lNowPoint = beginPosition;
//int lNextX,lNextY;
zzPoint lNextPoint;
int lTotalNum = tex.width*tex.height;
while(true)
{
lNextPoint = lDetectDirection.getOfsetPoint(lNowPoint);
var lNextDirection = lDetectDirection.nextDirection();
var lNextNextPoint = lNextDirection.getOfsetPoint(lNowPoint);
if (tex.isInside(lNextPoint) && tex.isActive(lNextPoint))
{
lNowPoint = lNextPoint;
if (lNowPoint == beginPosition)
break;
pProgressdMark[lNowPoint.x, lNowPoint.y] = pMark;
lOut.Add(lNowPoint);
lDetectDirection.toPreDirection();
lDetectDirection.toPreDirection();
}
else
{
//不可用,继续顺时针寻找
lDetectDirection.toNextDirection();
}
if(lOut.Count>lTotalNum)
{
Debug.LogError("error ");
break;
}
}
return lOut.ToArray();
}
