Exemplo n.º 1
0
 public static void Add(dbDataContext db, string unitName)
 {
     unit newUnit = new unit();
     newUnit.unit_name = unitName;
     db.units.InsertOnSubmit(newUnit);
     db.SubmitChanges();
 }
Exemplo n.º 2
0
        /// <summary>
        /// converts from string type to unit type
        /// </summary>
        /// <param name="input">
        /// string input to be converted
        /// </param>
        /// <param name="output">
        /// Unit output
        /// </param>
        /// <returns>
        /// Returns true if convert was successful, false otherwise
        /// </returns>
        static bool stringToUnit(string input, ref unit output)
        {
            // temporary string not to change the value of input
            string temp = input;

            // return value
            bool rv = true;

            // convert to lower case to ignore case
            temp = temp.ToLower();

            // if statement going through each possible case
            if (temp == "feet" || temp == "foot")
            {
                output = unit.FEET;
            }
            else if (temp == "meter" || temp == "meters")
            {
                output = unit.METER;
            }
            else if (temp == "miles" || temp == "mile")
            {
                output = unit.MILES;
            }
            else if (temp == "ounce" || temp == "ounces")
            {
                output = unit.OUNCES;
            }
            else if (temp == "quart" || temp == "quarts")
            {
                output = unit.QUARTS;
            }
            else if (temp == "liters" || temp == "liter")
            {
                output = unit.LITERS;
            }
            else if (temp == "square feet" || temp == "square foot")
            {
                output = unit.SQFEET;
            }
            else if (temp == "square miles" || temp == "square mile")
            {
                output = unit.SQMILES;
            }
            else if (temp == "acre" || temp == "acres")
            {
                output = unit.ACRES;
            }
            else
            {
                rv = false;
            }

            return(rv);
        }
Exemplo n.º 3
0
        /// <summary>
        /// <para>Determines whether the attacker is in front of the attacked with the given tolerance in degrees.</para>
        /// <para>A tolernace of 360 means the target can be attacked from anywhere while being considered "infront".</para>
        /// </summary>
        /// <param name="attacker">The unit performing the attack.</param>
        /// <param name="attacked">The unit being attacked.</param>
        /// <param name="tolerance">In degrees.</param>
        public static bool IsAttackerInfrontUnit(unit attacker, unit attacked, float tolerance)
        {
            var attackerAngle   = AngleBetweenPoints(GetUnitX(attacked), GetUnitY(attacked), GetUnitX(attacker), GetUnitY(attacker));
            var attackedAngle   = GetUnitFacing(attacked);
            var maxAllowedAngle = 360 - (0.5f * tolerance);
            var minAllowedAngle = 0.5f * tolerance;

            var difference = Math.Abs(attackerAngle - attackedAngle);

            return(difference < minAllowedAngle || difference > maxAllowedAngle);
        }
Exemplo n.º 4
0
        public ActionResult Create([Bind(Include = "id_unit,unitname,adress")] unit unit)
        {
            if (ModelState.IsValid)
            {
                db.unit.Add(unit);
                db.SaveChanges();
                return(RedirectToAction("Index"));
            }

            return(View(unit));
        }
Exemplo n.º 5
0
        /// <summary>
        /// Calculates the distance from <paramref name="source"/> unit to <paramref name="target"/> unit.
        /// </summary>
        public static float DistanceBetweenPoints(unit source, unit target)
        {
            var x1    = GetUnitX(source);
            var y1    = GetUnitY(source);
            var x2    = GetUnitX(target);
            var y2    = GetUnitY(target);
            var diffx = x1 - x2;
            var diffy = y1 - y2;

            return(SquareRoot((diffx * diffx) + (diffy * diffy)));
        }
Exemplo n.º 6
0
    public override void Interact()
    {
        for (int i = 0; i < players.Count; i++)
        {
            Debug.Log("Deposit Wood");
            unit u = players[i].GetComponent <unit>();

            ResourceManager.Instance.DepositResource(u.unitStorage.GetResourceType(), u.unitStorage.DepositStorage(), u.playerTypes);
            u.ResumeLastTask();
        }
    }
Exemplo n.º 7
0
        public void manual_summon(unit hero)
        {
            if (hero.IsDisposed)
            {
                return;
            }

            Current.unit         = hero;
            Current.unit.Updated = true;
            Current.unit.playSound(UnitAckSounds.Ready);
        }
Exemplo n.º 8
0
 // Use this for initialization
 void Start()
 {
     Debug.Log("twoD is" + Qrole.transform.Find("twoD"));
     Debug.Log("unit is" + Qrole.transform.Find("twoD").GetComponent <unit>());
     Qunit = Qrole.transform.Find("twoD").GetComponent <unit>();
     Eunit = Erole.transform.Find("twoD").GetComponent <unit>();
     Debug.Log("goto_AI is" + Qrole.transform.GetComponent <goTo_AI_player>());
     Qrole.transform.GetComponent <goTo_AI_player>().Marker = 'Q';
     Erole.transform.GetComponent <goTo_AI_player>().Marker = 'E';
     Debug.Log("Erole is" + Erole.name);
 }
Exemplo n.º 9
0
        public ActionResult Create([Bind(Include = "Unit_no,Song,Genres,Language,Album")] unit unit)
        {
            if (ModelState.IsValid)
            {
                db.units.Add(unit);
                db.SaveChanges();
                return(RedirectToAction("Index"));
            }

            return(View(unit));
        }
Exemplo n.º 10
0
        public ActionResult Create([Bind(Include = "ID,Name,CreatedDate,CreatedBy,ModifiedDate,ModifiedBy")] unit unit)
        {
            if (ModelState.IsValid)
            {
                db.units.Add(unit);
                db.SaveChanges();
                return(RedirectToAction("Index"));
            }

            return(View(unit));
        }
Exemplo n.º 11
0
        static bool filterCondition()
        {
            // The unit being potentially filtered out of the group
            unit checkedUnit = GetFilterUnit();
            // The unit that activated the trigger, in this case the caster
            unit caster = GetTriggerUnit();

            // Include unit in the group if its an enemy and selectable (not dead or dying)
            return(IsUnitEnemy(checkedUnit, GetOwningPlayer(caster)) &&
                   BlzIsUnitSelectable(checkedUnit));
        }
Exemplo n.º 12
0
 public Homing(unit caster, unit target) : base(caster, target)
 {
     CasterZ         = 50;
     TargetImpactZ   = 50;
     Speed           = 800;
     TurnRate        = 90;
     Roll            = 90;
     EffectScale     = 1.0f;
     EffectString    = @"Abilities\Weapons\GlaiveMissile\GlaiveMissile.mdl";
     CollisionRadius = 300;
 }
Exemplo n.º 13
0
        void player_unit_summon(object sender, DotaHIT.Jass.Native.Events.DHJassEventArgs e)
        {
            unit u = e.args["unit"] as unit;

            // if it's a hero
            if (u.primary != PrimAttrType.None)
            {
                Current.unit = u;
                Current.unit.playSound(UnitAckSounds.Ready);
            }
        }
Exemplo n.º 14
0
 /// <summary>
 /// Returns item's current slot in u's inventory, otherwise -1.
 /// </summary>
 /// <param name="u"></param>
 /// <param name="it"></param>
 /// <returns></returns>
 public static int GetItemSlot(unit u, item it)
 {
     for (int i = 0; i < UnitInventorySize(u); i++)
     {
         if (UnitItemInSlot(u, i) == it)
         {
             return(i);
         }
     }
     return(-1);
 }
Exemplo n.º 15
0
    void MouseOver_Unit(GameObject ourHitObject)
    {
        GameObject gameO    = GameObject.Find("game");
        string     whosTurn = gameO.GetComponent <gameController>().turn;

        if (Input.GetMouseButtonDown(0))
        {
            selectedUnitTwo = ourHitObject.GetComponent <unit>();
            try
            {
                if (selectedUnitTwo.permission != whosTurn)
                {
                    GameObject unitTile   = GameObject.Find("hexTile_" + selectedUnit.x + "_" + selectedUnit.y);
                    GameObject attackTile = GameObject.Find("hexTile_" + selectedUnitTwo.x + "_" + selectedUnitTwo.y);
                    attackUnit(unitTile, attackTile);
                    //selectedUnitTwo = null;
                    return;
                    //attack unit
                }
            }
            catch {
                Debug.Log("Something went wrong");
            }

            selectedUnit = ourHitObject.GetComponent <unit>();

            if (selectedUnit.permission == whosTurn)
            {
                turnOffEnergy();
                //finds energy canvas  -Pedro
                GameObject canvasObject = GameObject.FindGameObjectWithTag("energy");
                Transform  textTr       = canvasObject.transform.Find("energyPanel/energyLabel");
                Transform  textPanel    = canvasObject.transform.Find("energyPanel");
                Text       energyText   = textTr.GetComponent <Text>();

                textPanel.gameObject.SetActive(true);


                //TURN OFF ALL LIGHTS HERE
                GameObject.Find("hexTile_0_0").GetComponent <Hex>().turnOffAllLights();


                //change energy label and position  -Pedro
                energyText.text = "Energy : " + selectedUnit.energy.ToString();

                if (selectedUnit.energy > 0)
                {
                    GameObject onTile = GameObject.Find("hexTile_" + selectedUnit.x + "_" + selectedUnit.y);
                    onTile.GetComponent <Hex>().showPath(onTile.GetComponent <Hex>().GetNeighbours());
                }
            }
        }
    }
Exemplo n.º 16
0
    private void LateUpdate()
    {
        //   Debug.Log("LATE PDATE: " + UnitsOnScreen.Count);

        if ((isDrag) && UnitsOnScreen.Count > 0)
        {
            clearSelection();
            if (unitsInDrag != null)
            {
                cleardrag();
            }

            for (int i = 0; i < UnitsOnScreen.Count; i++)
            {
                GameObject unitObj = UnitsOnScreen[i] as GameObject;
                if (unitObj != null)
                {
                    unit       UnitScript  = unitObj.GetComponent <unit>();
                    GameObject selectedObj = unitObj.transform.Find("selected").gameObject;
                    //   Debug.Log(Client.getMyConId());
                    if (!UnitAlreadySelected(unitObj)) // && (myConId == Client.getMyConId())
                    {
                        if (UnitsInDragBox(UnitScript.ScreenPos) &&
                            unitObj.gameObject.GetComponent <SoldierScript>().enabled == true)
                        {
                            selectedObj.active = true;
                            unitsInDrag.Add(unitObj);
                            selectedObjets.Add(unitObj);
                            hideCanvases();
                            if (unitObj.name == "worker(Clone)")
                            {
                                buildCanvas.SetActive(true);
                            }
                            else
                            {
                                unitsControler.SetActive(true);
                            }
                        }
                        else
                        {
                            if (UnitAlreadySelected(unitObj))
                            {
                                if (!UnitsInDragBox(UnitScript.ScreenPos))
                                {
                                    selectedObject.active = false;
                                }
                            }
                        }
                    }
                }
            }
        }
    }
Exemplo n.º 17
0
 /// <summary>
 /// creates and extruder object when the portname is known I.E. COM1, COM2
 /// </summary>
 /// <param name="portName">port to use for communication with the robot arm.</param>
 public extruder(string portName)
 {
     output         = new Queue <string>();
     units          = unit.millimeters;
     coordinateMode = reference.incremental;
     configureExtruderPort(portName);
     currentExtrusion = 0;
     timer            = new System.Windows.Forms.Timer();
     timer.Interval   = 1000; // Running every 1000 ms
     timer.Tick      += Timer_Tick;
     timer.Enabled    = true;
 }
Exemplo n.º 18
0
 public void DrawUnit(unit unit)
 {
     this.unit = unit;
     if (unit.parameters_vector2_int.ContainsKey("position"))
     {
         transform.position = new Vector3(unit.parameters_vector2_int["position"].x, 2, unit.parameters_vector2_int["position"].y);
     }
     else
     {
         transform.position = Vector3.up * 30;
     }
 }
Exemplo n.º 19
0
    public void makeEnemyUnit(int i)
    {
        GameObject gameO    = GameObject.Find("game");
        string     whosTurn = gameO.GetComponent <gameController>().turn;

        if (whosTurn == "enemy")
        {
            //IF SPAWN TILE NOT TAKEN
            GameObject spawnTile = GameObject.Find("hexTile_" + ("14_") + ("7"));

            if (spawnTile.GetComponent <Hex>().status == "Free") //Make green unit
            {
                Vector3      spawnPos     = spawnTile.transform.position;
                GameObject   newUnit      = (GameObject)Instantiate(pyramidPrefab, spawnPos, Quaternion.identity);
                MeshRenderer newUnitMesh  = newUnit.GetComponentInChildren <MeshRenderer>();
                enemy        enemy        = GameObject.Find("enemyPlayer").GetComponent <enemy>();
                unit         newUnitStats = newUnit.GetComponent <unit>();
                newUnit.name            = "enemyUnit_" + (enemy.unitAmount + 1);
                newUnitStats.x          = 14;
                newUnitStats.y          = 7;
                newUnitStats.permission = "enemy";
                GameObject[] enemyUnits = enemy.enemyUnits;
                int          unitAmount = enemy.unitAmount;
                enemyUnits[unitAmount] = newUnit;
                enemy.unitAmount       = unitAmount + 1;

                if (i == 0) // Green Unit
                {
                    newUnitStats.energy        = 2;
                    newUnitStats.defaultEnergy = 2;
                    newUnitStats.timeToProduce = 1;
                    newUnitMesh.material.color = new Color(172f / 255f, 215f / 255f, 0f / 255f);
                }
                else if (i == 1) // Orange Unit
                {
                    newUnitStats.energy        = 3;
                    newUnitStats.defaultEnergy = 3;
                    newUnitStats.timeToProduce = 2;
                    newUnitMesh.material.color = new Color(255 / 255f, 11f / 255f, 0 / 255f);
                }
                else if (i == 2) // Blue Unit
                {
                    newUnitStats.energy        = 5;
                    newUnitStats.defaultEnergy = 5;
                    newUnitStats.timeToProduce = 5;
                    newUnitMesh.material.color = new Color(36f / 255f, 101f / 255f, 237f / 255f);
                }

                enemyUnitsList.Add(newUnitStats);
                //GameObject.Find("MouseManager").GetComponent<mouseManager>().turnOffMenu();
            }
        }
    }
Exemplo n.º 20
0
        //DEBUG STUFF BOARD

        public void printSingleBoard(int layerIn)
        {
            if (layerIn == 0)
            {
                int    layer       = 0 + layerIn;
                string printString = "";
                string layerAdd    = "   ";
                string LA          = "\n";
                for (int i = 0; i < layer; i++)
                {
                    LA += layerAdd;
                }
                layer       += 1;
                printString += LA + sequence;
                printString += LA + layerAdd + "PSCORE: " + PScore;
                printString += LA + layerAdd + "ESCORE: " + EScore;
                printString += LA + layerAdd + "UNITS: ";
                foreach (string key in OS.Keys)
                {
                    layer += 1;
                    unit currentUnit = (unit)OS [key];
                    printString += LA + layerAdd + layerAdd + "UNIT AT: " + key;
                    layer       += 1;
                    printString += LA + layerAdd + layerAdd + layerAdd + key;
                    printString += LA + layerAdd + layerAdd + layerAdd + "PLAYER OWNED: " + currentUnit.playerOwned;
                    printString += LA + layerAdd + layerAdd + layerAdd + "MOVES:";
                    foreach (string moveKey in currentUnit.moves.Keys)
                    {
                        layer       += 1;
                        printString += LA + layerAdd + layerAdd + layerAdd + layerAdd + moveKey;
                        //printString += LA + layerAdd + layerAdd + layerAdd + layerAdd + layerAdd + "PSCORE: " + ((board) currentUnit.moves [moveKey]).PScore.ToString();
                        //printString += LA + layerAdd + layerAdd + layerAdd + layerAdd + layerAdd + "ESCORE: " + ((board)currentUnit.moves [moveKey]).EScore.ToString ();
                    }
                }
                FileStream createFile = new FileStream("Logs/" + sequence + ".txt", FileMode.OpenOrCreate, FileAccess.Write);
                createFile.WriteByte(1);
                createFile.Close();
                StreamReader reader    = new StreamReader("Logs/" + sequence + ".txt");
                string       textSoFar = "";
                textSoFar += reader.ToString();
                reader.Close();
                //string FileName = "Logs/" + sequence + ".txt"; // This contains the name of the file. Don't add the ".txt"
                // Assign in inspector
                //TextAsset asset; // Gets assigned through code. Reads the file.
                //StreamWriter writer; // This is the writer that writes to the file
                StreamWriter writer = new StreamWriter("Logs/" + sequence + ".txt");                 // Does this work?
                writer.WriteLine(textSoFar + printString);
                writer.Flush();
                writer.Close();
                //Debug.Log (printString);
                //System.IO.File.WriteAllText("Logs/UnityLog.txt", printString);
            }
        }
Exemplo n.º 21
0
    // Use this for initialization
    void Start()
    {
        animator = gameObject.GetComponent <Animator>();
        unit     = (unit)gameObject.GetComponent("unit");
        //屬性加成

        damage += (int)(damage * 1.5f * (unit.skill / 100));

        stiff    += stiff * (unit.stiffable / 100);
        interval -= interval * (unit.attackSpeed / 100);
        //
    }
Exemplo n.º 22
0
 public void AddUnit(UnitDTO tempUnit)
 {
     using (var context = new MSSContext())
     {
         unit newUnit = new unit();
         newUnit.unitname   = tempUnit.unitname;
         newUnit.caresiteid = tempUnit.caresiteid;
         newUnit.activeyn   = true;
         context.units.Add(newUnit);
         context.SaveChanges();
     }
 }
Exemplo n.º 23
0
 public ActionResult Edit([Bind(Include = "unitid,unit_id,unit_description_english,unit_abreviation_english,unit_description_french,unit_abreviation_french,unit_status,unit_created_by,unit_created_datetime,unit_last_modified_by,unit_last_modified_datetime,unit_deleted_by,unit_deleted_datetime,unit_short_abreviation,office_id,HOU_ID")] unit unit)
 {
     if (ModelState.IsValid)
     {
         db.Entry(unit).State = EntityState.Modified;
         db.SaveChanges();
         return(RedirectToAction("Index"));
     }
     ViewBag.office_id = new SelectList(db.Country_office, "countryofficeid", "office_description_english", unit.office_id);
     ViewBag.HOU_ID    = new SelectList(db.Country_office, "staffid", "staff_email", unit.HOU_ID);
     return(View(unit));
 }
Exemplo n.º 24
0
 public static void SetMouseSpeed(unit speed)
 {
     for (int i = 0; i < args.Length; i++)
     {
         System.Console.WriteLine("Arg[{0}] = [{1}]", i, args[i]);
     }
     SystemParametersInfo(
         SPI_SETMOUSESPEED,
         0,
         speed,
         0);
 }
Exemplo n.º 25
0
 public Momentum(unit caster, unit target) : base(caster, target)
 {
     CasterZ       = 50;
     TargetImpactZ = 50;
     Speed         = 100;
     MaximumSpeed  = 1000;
     Acceleration  = 25;
     InitialAngle  = GetRandomReal(0, 360);
     EffectScale   = 1.0f;
     Roll          = 90;
     EffectString  = @"Abilities\Weapons\GlaiveMissile\GlaiveMissile.mdl";
     Interval      = 5.0f;
 }
Exemplo n.º 26
0
    public void setHUD(unit unit)
    {
        nameText.text = unit.UnitName;

        PhysicalitySlider.maxValue = unit.maxPysicality;
        PhysicalitySlider.value    = unit.currentPysicality;

        JoySlider.maxValue = unit.maxJoy;
        JoySlider.value    = unit.currentJoy;

        MeaningSlider.maxValue = unit.maxMeaning;
        MeaningSlider.value    = unit.currentMeaning;
    }
    public void setHUD(unit unit)
    {
        nameText.text = unit.UnitName;

        HPSlider.maxValue = unit.maxHP;
        HPSlider.value    = unit.currentHP;

        AtkModSlider.maxValue = unit.maxAtkMod;
        AtkModSlider.value    = unit.currentAtkMod;

        DefModSlider.maxValue = unit.maxDefMod;
        DefModSlider.value    = unit.currentDefMod;
    }
Exemplo n.º 28
0
 private void bAddUnit_Click(object sender, RoutedEventArgs e)
 {//обработчик кнопки добавить
     Windows.unitWindow uw = new unitWindow();
     uw.ShowDialog();
     if (uw.DialogResult == true) //если пользователь ввел значение
     {                            //создаем объект, заполняем и добавляем в модель бд
         unit newUnit = new unit();
         newUnit.name = uw.Name;
         core.serviceCenterDB.units.Add(newUnit);
         core.serviceCenterDB.SaveChanges();
         updateCbUnits();
     }
 }
Exemplo n.º 29
0
        public void showPrimAttrToolTip(unit hero)
        {
            UIRichTextEx.Default.ClearText();

            if (hero == null)
            {
                return;
            }

            UIRichTextEx.Default.AddText("Hero Attributes:", UIFonts.boldArial8, Color.White);

            UIRichTextEx.Default.AddLineInterval();

            UIRichTextEx.Default.AddText("Strength", Color.White);
            if (hero.primary == PrimAttrType.Str)
            {
                UIRichTextEx.Default.AddText("\n - Primary Attribute", Color.Yellow);
                UIRichTextEx.Default.AddText("\n-Each point increases damage by 1", Color.White);
            }
            UIRichTextEx.Default.AddText("\n-Each point increases hit points by 19", Color.White);
            UIRichTextEx.Default.AddText("\n-Each point increases hit point regen");
            UIRichTextEx.Default.AddText("\nStrength per level: " + hero.strPerLvl, Color.Gray);
            UIRichTextEx.Default.AddText("\nHit point regen: " + hero.hpRegen);

            UIRichTextEx.Default.AddLineInterval();

            UIRichTextEx.Default.AddText("Agility", Color.White);
            if (hero.primary == PrimAttrType.Agi)
            {
                UIRichTextEx.Default.AddText("\n - Primary Attribute", Color.Yellow);
                UIRichTextEx.Default.AddText("\n-Each point increases damage by 1", Color.White);
            }
            UIRichTextEx.Default.AddText("\n-Every 7 points increase armor by 1");
            UIRichTextEx.Default.AddText("\n-Each point increases attack speed by 1%");
            UIRichTextEx.Default.AddText("\nAgility per level: " + hero.agiPerLvl, Color.Gray);

            UIRichTextEx.Default.AddLineInterval();

            UIRichTextEx.Default.AddText("Intelligence", Color.White);
            if (hero.primary == PrimAttrType.Int)
            {
                UIRichTextEx.Default.AddText("\n - Primary Attribute", Color.Yellow);
                UIRichTextEx.Default.AddText("\n-Each point increases damage by 1", Color.White);
            }
            UIRichTextEx.Default.AddText("\n-Each point increases mana by 13");
            UIRichTextEx.Default.AddText("\n-Each point increases mana regen");
            UIRichTextEx.Default.AddText("\nIntelligence per level: " + hero.intPerLvl, Color.Gray);
            UIRichTextEx.Default.AddText("\nMana regen: " + hero.manaRegen + " mana/sec");

            contentRTB.Rtf = UIRichTextEx.Default.CloseRtf();
        }
Exemplo n.º 30
0
 /// <summary>
 /// Uses a dictionary to quickly find all buffs attached to the given unit.
 /// </summary>
 public static IEnumerable <Buff> GetBuffsOnUnit(unit unit)
 {
     if (buffsByUnit.TryGetValue(unit, out var buffs))
     {
         for (var i = 0; i < buffs.Count; i++)
         {
             var buff = buffs[i];
             if (buff.Active)
             {
                 yield return(buff);
             }
         }
     }
 }
Exemplo n.º 31
0
        /// <summary>
        /// Creates a new <see cref="Lightning"/> instance with the given parameters.
        /// <para>Will automatically set <see cref="CasterX"/>, <see cref="CasterY"/>, <see cref="TargetX"/> and <see cref="TargetY"/>.</para>
        /// </summary>
        /// <param name="name">The name of the lightning effect. See <see href="https://www.hiveworkshop.com/threads/beginners-guide-to-lightning-effects.220370/"/>.</param>
        /// <param name="caster">The source of the lightning. Will automatically update the position when <paramref name="caster"/> moves.</param>
        /// <param name="target">The target of the lightning. Will automatically update the position when <paramref name="target"/> moves.</param>
        public Lightning(string name, unit caster, unit target)
        {
            this.name    = name;
            this.casterZ = BlzGetUnitZ(caster) + GetUnitFlyHeight(caster);
            this.targetZ = BlzGetUnitZ(target) + GetUnitFlyHeight(target);

            Caster  = caster;
            CasterX = GetUnitX(caster);
            CasterY = GetUnitY(caster);

            Target  = target;
            TargetX = GetUnitX(target);
            TargetY = GetUnitY(target);
        }
Exemplo n.º 32
0
        public void showArmorToolTip(unit hero)
        {
            UIRichTextEx.Default.ClearText();

            if (hero == null) return;

            UIRichTextEx.Default.AddText("Armor: " + hero.armor, UIFonts.boldArial8, Color.White);

            UIRichTextEx.Default.AddLineInterval();

            UIRichTextEx.Default.AddText("Type: ", Color.Gray); UIRichTextEx.Default.AddText("Hero", Color.Yellow);
            UIRichTextEx.Default.AddText("\nDamage reduction: " + hero.get_damage_reduction() + "%", Color.Gray);
            UIRichTextEx.Default.AddText("\nMove speed: " + hero.moveSpeed);

            UIRichTextEx.Default.AddLineInterval();

            UIRichTextEx.Default.AddText("Heroes take reduced damage from Piercing, Magic,\nSiege attacks, and Spells", Color.White);

            contentRTB.Rtf = UIRichTextEx.Default.CloseRtf();
        }
Exemplo n.º 33
0
        private void dieB_Click(object sender, EventArgs e)
        {
            if (suicideRB.Checked)
            {
                Current.unit.OnDeath(Current.unit);
                Current.unit.playSound(AnimSounds.Death);
            }
            else
                switch (deathsCmbB.SelectedIndex)
                {
                    case 0: // enemy hero
                        int streak = streakCmbB.SelectedIndex;
                        if (streak > 0) streak += 2;

                        player enemyPlayer = player.players[7];
                        player alliedPlayer = player.players[2];

                        unit enemyHero = new unit();
                        enemyHero.codeID = "Hero"; // so triggers could work with id
                        enemyHero.ID.Value = "[Enemy Hero that will kill you]";
                        enemyHero.primary = PrimAttrType.Str; // only heroes have primary attributes
                        enemyHero.Level = (int)heroLevelNumUD.Value;

                        enemyHero.set_owningPlayer(enemyPlayer);

                        // generate killing streak for enemy hero
                        // by killing allied heroes
                        for (int j = 0; j < streak; j++)
                        {
                            unit victim = new unit();
                            victim.codeID = "Prey";
                            victim.ID.Value = "[Allied Victim]";
                            victim.primary = PrimAttrType.Str;

                            victim.set_owningPlayer(alliedPlayer);

                            victim.OnDeath(enemyHero);
                            victim.destroy();
                        }

                        // enemy hero kills our hero
                        Current.unit.OnDeath(enemyHero);

                        enemyHero.destroy();
                        break;

                    case 1: // allied hero
                        alliedPlayer = player.players[2];
                        unit ally = new unit();
                        ally.codeID = "Ally";
                        ally.ID.Value = "[Allied Killer]";
                        ally.primary = PrimAttrType.Str;

                        ally.set_owningPlayer(alliedPlayer);

                        // allied hero kills our hero
                        Current.unit.OnDeath(ally);

                        ally.destroy();
                        break;

                    case 2: // enemy creep
                        HabProperties hpsProfile = creepsCmbB.SelectedItem as HabProperties;

                        player enemyCreepPlayer = player.players[6];

                        unit creep = enemyCreepPlayer.add_unit(hpsProfile.name);

                        // creep kills our hero
                        Current.unit.OnDeath(creep);

                        creep.destroy();
                        break;

                    case 3: // neutral creep
                        hpsProfile = creepsCmbB.SelectedItem as HabProperties;

                        player neutralPlayer = player.players[12];

                        creep = neutralPlayer.add_unit(hpsProfile.name);

                        // creep kills our hero
                        Current.unit.OnDeath(creep);

                        creep.destroy();
                        break;
                    case 4: // unknown source
                        Current.unit.OnDeath(null);
                        break;

                }
        }
Exemplo n.º 34
0
        public void showHeroToolTip(unit hero)
        {
            this.Visible = false;
            UIRichTextEx.Default.ClearText();

            if (hero == null) return;

            UIRichTextEx.Default.AddTaggedText(hero.tip + "", UIFonts.boldArial8, Color.White);
            tipRTB.Rtf = UIRichTextEx.Default.CloseRtf();

            ShowPrices(hero.goldCost, null);

            UIRichTextEx.Default.ClearText();
            UIRichTextEx.Default.AddTaggedText(hero.description + "", UIFonts.boldArial8, Color.White);
            ubertipRTB.Rtf = UIRichTextEx.Default.CloseRtf();
        }
Exemplo n.º 35
0
        public void manual_summon(unit hero)
        {
            if (hero.IsDisposed) return;

            Current.unit = hero;
            Current.unit.Updated = true;
            Current.unit.playSound(UnitAckSounds.Ready);
        }
Exemplo n.º 36
0
 partial void Updateunit(unit instance);
Exemplo n.º 37
0
 public UnitStatsCalculator(unit unit, int armorDamage)
 {
     this.unit = unit;
     this.armorDamage = armorDamage;
 }
Exemplo n.º 38
0
        public void showPrimAttrToolTip(unit hero)
        {
            UIRichTextEx.Default.ClearText();

            if (hero == null) return;

            UIRichTextEx.Default.AddText("Hero Attributes:", UIFonts.boldArial8, Color.White);

            UIRichTextEx.Default.AddLineInterval();

            UIRichTextEx.Default.AddText("Strength", Color.White);
            if (hero.primary == PrimAttrType.Str)
            {
                UIRichTextEx.Default.AddText("\n - Primary Attribute", Color.Yellow);
                UIRichTextEx.Default.AddText("\n-Each point increases damage by 1", Color.White);
            }
            UIRichTextEx.Default.AddText("\n-Each point increases hit points by 19",Color.White);
            UIRichTextEx.Default.AddText("\n-Each point increases hit point regen");
            UIRichTextEx.Default.AddText("\nStrength per level: "+hero.strPerLvl, Color.Gray);
            UIRichTextEx.Default.AddText("\nHit point regen: "+hero.hpRegen);

            UIRichTextEx.Default.AddLineInterval();

            UIRichTextEx.Default.AddText("Agility", Color.White);
            if (hero.primary == PrimAttrType.Agi)
            {
                UIRichTextEx.Default.AddText("\n - Primary Attribute", Color.Yellow);
                UIRichTextEx.Default.AddText("\n-Each point increases damage by 1", Color.White);
            }
            UIRichTextEx.Default.AddText("\n-Every 7 points increase armor by 1");
            UIRichTextEx.Default.AddText("\n-Each point increases attack speed by 1%");
            UIRichTextEx.Default.AddText("\nAgility per level: " + hero.agiPerLvl, Color.Gray);

            UIRichTextEx.Default.AddLineInterval();

            UIRichTextEx.Default.AddText("Intelligence", Color.White);
            if (hero.primary == PrimAttrType.Int)
            {
                UIRichTextEx.Default.AddText("\n - Primary Attribute", Color.Yellow);
                UIRichTextEx.Default.AddText("\n-Each point increases damage by 1", Color.White);
            }
            UIRichTextEx.Default.AddText("\n-Each point increases mana by 13");
            UIRichTextEx.Default.AddText("\n-Each point increases mana regen");
            UIRichTextEx.Default.AddText("\nIntelligence per level: " + hero.intPerLvl, Color.Gray);
            UIRichTextEx.Default.AddText("\nMana regen: " + hero.manaRegen + " mana/sec");

            contentRTB.Rtf = UIRichTextEx.Default.CloseRtf();
        }
Exemplo n.º 39
0
        /// <summary>
        /// converts from string type to unit type
        /// </summary>
        /// <param name="input">
        /// string input to be converted
        /// </param>
        /// <param name="output">
        /// Unit output
        /// </param>
        /// <returns>
        /// Returns true if convert was successful, false otherwise
        /// </returns>
        static bool stringToUnit(string input, ref unit output)
        {
            // temporary string not to change the value of input
            string temp = input;

            // return value
            bool rv = true;

            // convert to lower case to ignore case
            temp = temp.ToLower();

            // if statement going through each possible case
            if (temp == "feet" || temp == "foot")
                output = unit.FEET;
            else if (temp == "meter" || temp == "meters")
                output = unit.METER;
            else if (temp == "miles" || temp == "mile")
                output = unit.MILES;
            else if (temp == "ounce" || temp == "ounces")
                output = unit.OUNCES;
            else if (temp == "quart" || temp == "quarts")
                output = unit.QUARTS;
            else if (temp == "liters" || temp == "liter")
                output = unit.LITERS;
            else if (temp == "square feet" || temp == "square foot")
                output = unit.SQFEET;
            else if (temp == "square miles" || temp == "square mile")
                output = unit.SQMILES;
            else if (temp == "acre" || temp == "acres")
                output = unit.ACRES;
            else
                rv = false;

            return rv;
        }
Exemplo n.º 40
0
        private void killHeroB_Click(object sender, EventArgs e)
        {
            int streak = streakCmbB.SelectedIndex;
            if (streak > 0) streak += 2;

            player enemyPlayer = player.players[7];
            player alliedPlayer = player.players[2];

            for (int i = 0; i < (int)heroesNumUD.Value; i++)
            {
                unit enemyHero = new unit();
                enemyHero.codeID = "Hero"; // so triggers could work with id
                enemyHero.ID.Value = "[Enemy Hero to be killed]";
                enemyHero.primary = PrimAttrType.Str; // only heroes have primary attributes
                enemyHero.Level = (int)heroLevelNumUD.Value;

                enemyHero.set_owningPlayer(enemyPlayer);

                // generate killing streak for enemy hero
                // by killing allied heroes
                for (int j = 0; j < streak; j++)
                {
                    unit victim = new unit();
                    victim.codeID = "Prey";
                    victim.ID.Value = "[Allied Victim]";
                    victim.primary = PrimAttrType.Str;

                    victim.set_owningPlayer(alliedPlayer);

                    victim.OnDeath(enemyHero);
                    victim.destroy();
                }

                // now our hero kills this enemy hero
                enemyHero.OnDeath(Current.unit);
                enemyHero.destroy();
            }
        }
Exemplo n.º 41
0
 partial void Insertunit(unit instance);
Exemplo n.º 42
0
 int compareUnits(unit x, unit y)
 {
     return Comparer<int>.Default.Compare(x.handle, y.handle);
 }
Exemplo n.º 43
0
 partial void Deleteunit(unit instance);
Exemplo n.º 44
0
        /// <summary>
        /// converts value given from unit from to unit to. 
        /// </summary>
        /// <param name="value"></param>
        /// the value to be converted
        /// <param name="from"></param>
        /// the unit of the value provided the param value
        /// <param name="to"></param>
        /// the unit of the return value
        /// <returns>
        /// returns the converted value
        /// </returns>
        static bool convert(unit from, double input, unit to, ref double output)
        {
            // return value
            bool rv = true;

            // switch through all conversions
            switch (from)
            {
                case unit.FEET:
                    switch (to)
                    {
                        case unit.FEET:
                            output = input;
                            break;
                        case unit.METER:
                            output = input * 0.3048;
                            break;
                        case unit.MILES:
                            output = input / 5280;
                            break;
                        default:
                            rv = false;
                            break;
                    }
                    break;
                case unit.METER:
                    switch (to)
                    {
                        case unit.FEET:
                            output = input * 3.28084;
                            break;
                        case unit.METER:
                            output = input;
                            break;
                        case unit.MILES:
                            output = input / 1609.34;
                            break;
                        default:
                            rv = false;
                            break;
                    }
                    break;
                case unit.MILES:
                    switch (to)
                    {
                        case unit.FEET:
                            output = input * 5280;
                            break;
                        case unit.METER:
                            output = input * 1609.34;
                            break;
                        case unit.MILES:
                            output = input;
                            break;
                        default:
                            rv = false;
                            break;
                    }
                    break;
                case unit.OUNCES:
                    switch (to)
                    {
                        case unit.OUNCES:
                            output = input;
                            break;
                        case unit.QUARTS:
                            output = input * 0.03125;
                            break;
                        case unit.LITERS:
                            output = input * 0.0295735;
                            break;
                        default:
                            rv = false;
                            break;
                    }
                    break;
                case unit.QUARTS:
                    switch (to)
                    {
                        case unit.OUNCES:
                            output = input * 32;
                            break;
                        case unit.QUARTS:
                            output = input;
                            break;
                        case unit.LITERS:
                            output = input * 0.946353;
                            break;
                        default:
                            rv = false;
                            break;
                    }
                    break;
                case unit.LITERS:
                    switch (to)
                    {
                        case unit.OUNCES:
                            output = input * 33.814;
                            break;
                        case unit.QUARTS:
                            output = input * 1.05669;
                            break;
                        case unit.LITERS:
                            output = input;
                            break;
                        default:
                            rv = false;
                            break;
                    }
                    break;
                case unit.SQFEET:
                    switch (to)
                    {
                        case unit.SQFEET:
                            output = input;
                            break;
                        case unit.SQMILES:
                            output = input / 27878400;
                            break;
                        case unit.ACRES:
                            output = input / 43560;
                            break;
                        default:
                            rv = false;
                            break;
                    }
                    break;
                case unit.SQMILES:
                    switch (to)
                    {
                        case unit.SQFEET:
                            output = input * 27878400;
                            break;
                        case unit.SQMILES:
                            output = input;
                            break;
                        case unit.ACRES:
                            output = input * 43560;
                            break;
                        default:
                            rv = false;
                            break;
                    }
                    break;
                case unit.ACRES:
                    switch (to)
                    {
                        case unit.SQFEET:
                            output = input * 43560;
                            break;
                        case unit.SQMILES:
                            output = input / 640;
                            break;
                        case unit.ACRES:
                            output = input;
                            break;
                        default:
                            rv = false;
                            break;
                    }
                    break;
            }
            return rv;
        }