Exemplo n.º 1
0
        public void centiped(machine_config config)
        {
            centiped_base(config);

            maincpu.target.memory().set_addrmap(AS_PROGRAM, centiped_map);

            // M10
            outlatch.target.q_out_cb(7).set(flip_screen_w).reg();

            /* sound hardware */
            SPEAKER(config, "mono").front_center();

            pokey_device pokey = POKEY(config, "pokey", 12096000 / 8);

            pokey.set_output_opamp_low_pass(RES_K(3.3), CAP_U(0.01), 5.0);
            pokey.GetClassInterface <device_sound_interface>().add_route(ALL_OUTPUTS, "mono", 0.5);
        }
Exemplo n.º 2
0
        //WRITE8_MEMBER( pokey_device::write )
        public void pokey_device_write(address_space space, offs_t offset, u8 data, u8 mem_mask = 0xff)
        {
            pokey_device pokey = (pokey_device)subdevice("pokey");

            pokey.write(space, offset, data, mem_mask);
        }
Exemplo n.º 3
0
        //void centiped_base(machine_config &config);
        //void milliped(machine_config &config);
        //void bullsdrt(machine_config &config);
        //void centipdb(machine_config &config);
        //void magworm(machine_config &config);
        //void caterplr(machine_config &config);
        //void centiped(machine_config &config);
        //void centipedj(machine_config &config);
        //void mazeinv(machine_config &config);
        //void warlords(machine_config &config);
        //void multiped(machine_config &config);

        //void init_multiped();
        //void init_bullsdrt();

        // drivers/centiped.cpp
        //DECLARE_WRITE8_MEMBER(irq_ack_w);
        //DECLARE_READ8_MEMBER(centiped_IN0_r);
        //DECLARE_READ8_MEMBER(centiped_IN2_r);
        //DECLARE_READ8_MEMBER(milliped_IN1_r);
        //DECLARE_READ8_MEMBER(milliped_IN2_r);
        //DECLARE_WRITE_LINE_MEMBER(input_select_w);
        //DECLARE_WRITE_LINE_MEMBER(control_select_w);
        //DECLARE_READ8_MEMBER(mazeinv_input_r);
        //DECLARE_WRITE8_MEMBER(mazeinv_input_select_w);
        //DECLARE_READ8_MEMBER(bullsdrt_data_port_r);
        //DECLARE_WRITE_LINE_MEMBER(coin_counter_left_w);
        //DECLARE_WRITE_LINE_MEMBER(coin_counter_center_w);
        //DECLARE_WRITE_LINE_MEMBER(coin_counter_right_w);
        //DECLARE_WRITE_LINE_MEMBER(bullsdrt_coin_count_w);
        //DECLARE_READ8_MEMBER(earom_read);
        //DECLARE_WRITE8_MEMBER(earom_write);
        //DECLARE_WRITE8_MEMBER(earom_control_w);
        //DECLARE_READ8_MEMBER(caterplr_unknown_r);
        //DECLARE_WRITE8_MEMBER(caterplr_AY8910_w);
        //DECLARE_READ8_MEMBER(caterplr_AY8910_r);
        //DECLARE_READ8_MEMBER(multiped_eeprom_r);
        //DECLARE_WRITE8_MEMBER(multiped_eeprom_w);
        //DECLARE_WRITE8_MEMBER(multiped_prgbank_w);

        // video/centiped.c
        //DECLARE_WRITE8_MEMBER(centiped_videoram_w);
        //DECLARE_WRITE_LINE_MEMBER(flip_screen_w);
        //DECLARE_WRITE8_MEMBER(multiped_gfxbank_w);
        //DECLARE_WRITE8_MEMBER(bullsdrt_tilesbank_w);
        //DECLARE_WRITE8_MEMBER(bullsdrt_sprites_bank_w);
        //DECLARE_WRITE8_MEMBER(centiped_paletteram_w);
        //DECLARE_WRITE8_MEMBER(milliped_paletteram_w);
        //DECLARE_WRITE8_MEMBER(mazeinv_paletteram_w);
        //TILE_GET_INFO_MEMBER(centiped_get_tile_info);
        //TILE_GET_INFO_MEMBER(warlords_get_tile_info);
        //TILE_GET_INFO_MEMBER(milliped_get_tile_info);
        //TILE_GET_INFO_MEMBER(bullsdrt_get_tile_info);
        //DECLARE_MACHINE_START(centiped);
        //DECLARE_MACHINE_RESET(centiped);
        //DECLARE_VIDEO_START(centiped);
        //DECLARE_VIDEO_START(bullsdrt);
        //DECLARE_MACHINE_RESET(magworm);
        //DECLARE_VIDEO_START(milliped);
        //DECLARE_VIDEO_START(warlords);
        //DECLARE_PALETTE_INIT(warlords);
        //uint32_t screen_update_centiped(screen_device &screen, bitmap_ind16 &bitmap, const rectangle &cliprect);
        //uint32_t screen_update_bullsdrt(screen_device &screen, bitmap_ind16 &bitmap, const rectangle &cliprect);
        //uint32_t screen_update_milliped(screen_device &screen, bitmap_ind16 &bitmap, const rectangle &cliprect);
        //uint32_t screen_update_warlords(screen_device &screen, bitmap_ind16 &bitmap, const rectangle &cliprect);
        //TIMER_DEVICE_CALLBACK_MEMBER(generate_interrupt);
        //void init_penmask();
        //void init_common();
        //void milliped_set_color(offs_t offset, uint8_t data);
        //inline int read_trackball(int idx, int switch_port);
        //void bullsdrt_data_map(address_map &map);
        //void bullsdrt_map(address_map &map);
        //void bullsdrt_port_map(address_map &map);
        //void caterplr_map(address_map &map);
        //void centipdb_map(address_map &map);
        //void centiped_base_map(address_map &map);
        //void centiped_map(address_map &map);
        //void centipedj_map(address_map &map);
        //void magworm_map(address_map &map);
        //void mazeinv_map(address_map &map);
        //void milliped_map(address_map &map);
        //void multiped_map(address_map &map);
        //void warlords_map(address_map &map);


        // wrappers because I don't know how to find the correct device during construct_ startup

        //READ8_MEMBER( pokey_device::read )
        public u8 pokey_device_read(address_space space, offs_t offset, u8 mem_mask = 0xff)
        {
            pokey_device pokey = (pokey_device)subdevice("pokey");

            return(pokey.read(space, offset, mem_mask));
        }