private void sendData(SWSDataContext db, Socket socket, string stationName, int stationId)
{
//发送设备控制信息到客户端
C_To_S_Data <CSDataStandard.Transfer.DeviceControl> sendObj = new C_To_S_Data <CSDataStandard.Transfer.DeviceControl>();
sendObj.Flag = HandleFlag.DeviceControl;
sendObj.Data = new List <CSDataStandard.Transfer.DeviceControl>();
// List<device_control> listDeviceControl = db.device_control.Where(c => c.state == "0" && c.station_id == stationId).ToList(); //0表示未发送
//把那时不需要发送到客户端的记录的发送状态都置为2
db.ExecuteCommand("UPDATE dbo.device_control SET state=2 WHERE station_id=" + stationId + " AND state=0 AND id NOT IN (SELECT MAX(id) AS datetime FROM dbo.device_control WHERE station_id=" + stationId + " AND state=0 GROUP BY testid,gong_kuang_id)");
//找出需要发送的几行数据
List <device_control> listDeviceControl = db.ExecuteQuery <device_control>("SELECT * FROM dbo.device_control WHERE id IN (SELECT MAX(id) AS datetime FROM dbo.device_control WHERE station_id=" + stationId + " AND state=0 GROUP BY testid,gong_kuang_id)").ToList();
//device_control device_control = listDeviceControl.OrderByDescending(c => c.datetime).FirstOrDefault();
foreach (device_control device_control in listDeviceControl)
{
try
{
gong_kuang_config gongKuang = db.gong_kuang_config.SingleOrDefault(c => c.id == device_control.gong_kuang_id);
CSDataStandard.Transfer.DeviceControl transferDeviceControl = new CSDataStandard.Transfer.DeviceControl();
transferDeviceControl.Value = device_control.control_code; //控制的值
transferDeviceControl.Address = (int)gongKuang.address;
transferDeviceControl.Register = gongKuang.write_register;
transferDeviceControl.DeviceControlId = device_control.id; //设备控制表的id
//transferDeviceControl.DeviceNumber = device_control.device_number;
//transferDeviceControl.Datetime = Convert.ToDateTime(device_control.datetime);
//transferDeviceControl.ControlCode = device_control.control_code;
sendObj.Data.Add(transferDeviceControl);
}
catch (Exception ex)
{
LogMg.AddError(ex);
}
}
//更改设备控制表中的数据为已发送状态
foreach (device_control item in listDeviceControl)
{
item.state = "1";
}
db.SubmitChanges(); //保存
//把对象转换为json字符串
string sendJson = Utility.JsonHelper.JsonSerializer <C_To_S_Data <CSDataStandard.Transfer.DeviceControl> >(sendObj);
Byte[] msgSend = Encoding.Unicode.GetBytes(sendJson);
socket.Send(msgSend, msgSend.Length, SocketFlags.None);
//显示到UI界面
// string msg = string.Format("发送{0}行数据到【{1}】客户端", sendObj.Data.Count, stationName);
// lb_msg.BeginInvoke(new Action<string>(printMsg), msg);
}
private static void TakePhotoTp5(SWSDataContext db, GuangDaiService.CorePlatformWebServiceClient ws, int stationId, string wscid)
{
// List<control_command> commands = db.control_command.Where(c => c.station_id == stationId && c.tp.Trim() == "5" && c.state == 0).ToList();
List <control_command> commands = db.ExecuteQuery <control_command>("SELECT * FROM dbo.control_command WHERE station_id=" + stationId + " AND state=0 AND tp='5'").ToList();
foreach (control_command command in commands)
{
if (command.COUNT == null)
{
command.COUNT = 0;
}
try
{
gong_kuang_config gongkuang = db.gong_kuang_config.SingleOrDefault(c => c.id == command.gong_kuang_id);
if (gongkuang == null) //如果找不到command对应和gongkuangid,则把这条command标记为执行失败。
{
LogMg.AddError("找不到控制命令所对应的工况配置信息");
command.execute_result = 0; //标记为执行失败
command.state = 1; // 就当已经执行过
command.execute_comment = "执行失败,找不到控制命令所对应的工况配置信息";
command.complete_datetime = DateTime.Now;
db.SubmitChanges();
continue;
}
byte address = (byte)gongkuang.address;
GuangDaiService.config config = ws.doConfig(wscid, Convert.ToInt32(gongkuang.write_register), (int)command.read_or_write, Convert.ToInt32(command.value), "");
LogMg.AddDebug(String.Format(" ws.doConfig({0},{1}, {2}, {3}, {4}) 返回结果是 result={5} value={6} message={7} ", wscid, gongkuang.write_register, command.read_or_write, "-1", "", config.result, config.value, config.message));
command.state = 1; //标志为已发送
if (config.result == true)
{
command.execute_result = 1; //标记为执行成功
command.execute_comment = "执行写操作成功";
gongkuang.write_value = command.value;
gongkuang.execute_comment = "执行写操作成功";
}
else
{
command.execute_result = 0; //标记为执行失败
command.execute_comment = "执行广岱拍照操作失败";
gongkuang.execute_comment = "执行广岱拍照操作失败";
}
gongkuang.execute_datetime = DateTime.Now;
command.complete_datetime = DateTime.Now;
}
catch (Exception ex)
{
command.execute_result = 0; //标记为执行失败
command.execute_comment = "执行广岱拍照操作失败,服务程序出现了异常";
// MessageQueue.Enqueue_DataInfo(string.Format("接收时间:【{0}】,站点：{1}, 执行工况配置失败.程序出现异常,请查看日志. ", DateTime.Now, station.name));
LogMg.AddError(ex);
}
finally
{
command.complete_datetime = DateTime.Now;
}
try
{
db.SubmitChanges();
}
catch (Exception ex)
{
LogMg.AddError(ex.ToString());
}
}
}
/// <summary>
/// 执行DTU控制任务
/// </summary>
/// <param name="state"></param>
private static void ExecuteDtuOrder(object state)
{
//1.锁住客户端对象
//2.找出客户端对应的数据库，并找出需要执行的控制指令。
//3.循环发送指令到客户端，再接收返回的数据，存入数据库。
//4.释放客户端对象
DTUClientInfo client = (DTUClientInfo)state;
using (MyLock mylock = new MyLock(client, 20000, false))
{
if (mylock.IsTimeout == false)
{
//LogManager.AddDebug("ControlCommandThread线程：" + Thread.CurrentThread.ManagedThreadId + " 开始锁了 是否超时" + mylock.IsTimeout);
//找出这个站点对应的数据库, 并获取数据库连接
SqlConnection connection = GetDbConnectionByTel(client.TelOrGprsId);
if (connection == null) //找不到对应的数据库连接
{
LogMg.AddDebug(string.Format("根据Tel={0}的设备唯一id，在sysconfig.xml中找不到对应的数据库连接", client.TelOrGprsId.ToString()));
return;
}
SWSDataContext db = new SWSDataContext(connection);
takePhoto(db, client.StationId, client);
//把那些不需要执行了的数据 state=1 就当这行指令已经执行过了
List <int> giveUpCommands = db.ExecuteQuery <int>("SELECT id FROM dbo.control_command WHERE station_id=" + client.StationId + " AND (state=0 OR state IS NULL) AND id NOT IN (SELECT MAX(id) FROM dbo.control_command WHERE station_id=" + client.StationId + " AND (state=0 OR state IS NULL) GROUP BY gong_kuang_id,read_or_write) ").ToList();
if (giveUpCommands.Count > 0)
{
db.ExecuteCommand("UPDATE dbo.control_command SET state=1 WHERE id in(" + string.Join(", ", giveUpCommands) + ")");
}
//db.ExecuteCommand("UPDATE dbo.control_command SET state=1 WHERE station_id=" + client.StationId + " AND (state=0 OR state IS NULL) AND id NOT IN (SELECT MAX(id) FROM dbo.control_command WHERE station_id=" + client.StationId + " AND (state=0 OR state IS NULL) GROUP BY gong_kuang_id,read_or_write) ");
//获取需要执行的指令
List <control_command> commands = db.ExecuteQuery <control_command>("SELECT * FROM dbo.control_command WHERE id IN(SELECT MAX(id) FROM dbo.control_command WHERE station_id=" + client.StationId + " AND communication_mode=2 AND (state=0 OR state IS NULL) GROUP BY gong_kuang_id,read_or_write) ORDER BY add_datetime").ToList();
List <gong_kuang_config> gongKuangs = db.gong_kuang_config.Where(c => c.station_id == client.StationId).ToList();
foreach (control_command command in commands) //循环发送指令
{
if (command.COUNT == null)
{
command.COUNT = 0;
}
try
{
gong_kuang_config gongkuang = gongKuangs.SingleOrDefault(c => c.id == command.gong_kuang_id);
if (gongkuang == null) //如果找不到command对应和gongkuangid,则把这条command标记为执行失败。
{
LogMg.AddError("找不到控制命令所对应的工况配置信息");
command.execute_result = 0; //标记为执行失败
command.state = 1; // 就当已经执行过
command.execute_comment = "执行失败,找不到控制命令所对应的工况配置信息";
command.complete_datetime = DateTime.Now;
db.SubmitChanges();
continue;
}
byte address = (byte)gongkuang.address;
ClearSocketCache(client.socket);//清除缓冲区
LogMg.AddDebug("hashcode=" + client.socket.GetHashCode());
ModbusReturn modbusReturn = new ModbusReturn();
if (command.read_or_write == 0) //读读读读读读读读读读读
{
while (modbusReturn.success == false && command.COUNT < SysConfig.userProfile.ExecuteFailureCount)
{
modbusReturn.clear();
modbus.readdata(client.Protocol, client.socket, "", address, ushort.Parse(gongkuang.read_register), int.Parse(gongkuang.function_code), gongkuang.data_type, gongkuang.decode_order, (int)gongkuang.receive_timeout, modbusReturn);
//LogManager.AddDebug(String.Format("执行读命令 GPRSID:{0} gongkuangid:{1} address{2} 读寄存器编号:{3} 读取的值{4} 方法的返回bool值:{5}", client.TelOrGprsId, gongkuang.id, address, gongkuang.read_register, value.ToString(), flag));
command.COUNT++;
}
command.state = 1; //标志为已发送
if (modbusReturn.success == true)
{
DTU_ClientManager.UpdateLastVisitTime(client, DateTime.Now);
command.execute_result = 1; //标记为执行成功
command.value = Convert.ToString(modbusReturn.value);
gongkuang.read_value = Convert.ToString(modbusReturn.value);
gongkuang.execute_comment = "执行读取操作成功";
if (gongkuang.config_type == "05")
{
try
{
test test = db.test.Single(c => c.testid == gongkuang.testid);
test.value = Convert.ToString(modbusReturn.value * gongkuang.Multiple + gongkuang.AddNumber);
}
catch (Exception ex)
{
LogMg.AddError(ex);
LogMg.AddDebug("找不到工况对应的检测点，gongkuangid=" + gongkuang.id + " testid=" + gongkuang.testid);
}
}
}
else
{
command.execute_result = 0; //标记为执行失败
gongkuang.execute_comment = "执行读取操作失败";
}
command.execute_comment = modbusReturn.ToString();
}
else //写写写写写写写写写写写写写写写
{
while (modbusReturn.success == false && command.COUNT < SysConfig.userProfile.ExecuteFailureCount)
{
modbusReturn.clear();
modbus.writedata(client.Protocol, client.socket, "", address, ushort.Parse(gongkuang.write_register), gongkuang.data_type, (int)gongkuang.receive_timeout, short.Parse(command.value), modbusReturn);
//LogManager.AddDebug(String.Format("执行写命令 GPRSID:{0} address{1} 写寄存器编号:{2} 写入的值{3} 方法的返回bool值:{4}", client.TelOrGprsId, address, gongkuang.write_register, command.value, flag));
command.COUNT++;
}
command.state = 1; //标志为已发送
if (modbusReturn.success == true)
{
DTU_ClientManager.UpdateLastVisitTime(client, DateTime.Now);
command.execute_result = 1; //标记为执行成功
gongkuang.write_value = command.value;
gongkuang.execute_comment = "执行写操作成功";
}
else
{
command.execute_result = 0; //标记为执行失败
gongkuang.execute_comment = "执行写操作失败";
}
command.execute_comment = modbusReturn.ToString();
}
gongkuang.execute_datetime = DateTime.Now;
command.complete_datetime = DateTime.Now;
}
catch (Exception ex)
{
command.execute_result = 0; //标记为执行失败
command.execute_comment = "执行命令失败,服务程序出现了异常";
// MessageQueue.Enqueue_DataInfo(string.Format("接收时间:【{0}】,站点：{1}, 执行工况配置失败.程序出现异常,请查看日志. ", DateTime.Now, station.name));
LogMg.AddError(ex);
}
finally
{
command.complete_datetime = DateTime.Now;
}
db.SubmitChanges();
}
//LogManager.AddDebug("ControlCommandThread线程：" + Thread.CurrentThread.ManagedThreadId + " 释放锁了 ");
}
else
{
LogMg.AddDebug("ControlCommandThread 锁失败了");
}
}
}
private static void ExecuteGuangDai透传Order(object state)
{
try
{
Args arg = (Args)state;
SWSDataContext db = new SWSDataContext(ConnectStringHelper.GetConnection(SysConfig.userProfile.DbAddress, arg.dbName, SysConfig.userProfile.DbUserName, SysConfig.userProfile.DbPassword));
GuangDaiService.CorePlatformWebServiceClient ws = new GuangDaiService.CorePlatformWebServiceClient(arg.gdServerCfg);
SWS_DBDataContext SWS_DB = new SWS_DBDataContext(ConnectStringHelper.GetConnection(SysConfig.userProfile.DbAddress, SysConfig.userProfile.DbName, SysConfig.userProfile.DbUserName, SysConfig.userProfile.DbPassword));
List <guangdai_station_link> links = SWS_DB.guangdai_station_link.ToList();
String wscid = getWscId(arg, db, links);
if (String.IsNullOrEmpty(wscid))
{
LogMg.AddDebug("站点id=" + arg.station_id + " 找不到对应的wscId");
return;
}
//把那些不需要执行了的数据 state=1 就当这行指令已经执行过了
List <int> giveUpCommands = db.ExecuteQuery <int>("SELECT id FROM dbo.control_command WHERE station_id=" + arg.station_id + " AND (state=0 OR state IS NULL) AND id NOT IN (SELECT MAX(id) FROM dbo.control_command WHERE station_id=" + arg.station_id + " AND (state=0 OR state IS NULL) GROUP BY gong_kuang_id,read_or_write) ").ToList();
if (giveUpCommands.Count > 0)
{
db.ExecuteCommand("UPDATE dbo.control_command SET state=1 WHERE id in(" + string.Join(", ", giveUpCommands) + ")");
}
//db.ExecuteCommand("UPDATE dbo.control_command SET state=1 WHERE station_id=" + arg.station_id + " AND (state=0 OR state IS NULL) AND id NOT IN (SELECT MAX(id) FROM dbo.control_command WHERE station_id=" + arg.station_id + " AND (state=0 OR state IS NULL) GROUP BY gong_kuang_id,read_or_write) ");
//获取需要执行的指令
List <control_command> commands = db.ExecuteQuery <control_command>("SELECT * FROM dbo.control_command WHERE id IN(SELECT MAX(id) as id FROM dbo.control_command WHERE station_id=" + arg.station_id + " AND communication_mode in (5,6) AND tp is Null AND (state=0 OR state IS NULL) GROUP BY gong_kuang_id,read_or_write) ORDER BY add_datetime").ToList();
TakePhotoTp5(db, ws, arg.station_id, wscid);
for (int i = 0; i < commands.Count; i++)
{
control_command command = commands[i];
if (command.COUNT == null)
{
command.COUNT = 0;
}
try
{
gong_kuang_config gongkuang = db.gong_kuang_config.SingleOrDefault(c => c.id == command.gong_kuang_id);
if (gongkuang == null) //如果找不到command对应和gongkuangid,则把这条command标记为执行失败。
{
LogMg.AddError("找不到控制命令所对应的工况配置信息");
command.execute_result = 0; //标记为执行失败
command.state = 1; // 就当已经执行过
command.execute_comment = "执行失败,找不到控制命令所对应的工况配置信息";
command.complete_datetime = DateTime.Now;
db.SubmitChanges();
continue;
}
ModbusReturn modbusReturn = new ModbusReturn();
byte address = (byte)gongkuang.address;
if (command.read_or_write == 0) //读读读读读读读读读读读
{
GuangDaiCommunicationModbus.readdata(ws, wscid, address, ushort.Parse(gongkuang.read_register), int.Parse(gongkuang.function_code), gongkuang.data_type, gongkuang.decode_order, modbusReturn);
command.state = 1; //标志为已发送
if (modbusReturn.success == true)
{
command.execute_result = 1; //标记为执行成功
command.value = Convert.ToString(modbusReturn.value);
gongkuang.read_value = Convert.ToString(modbusReturn.value);
gongkuang.execute_comment = "执行读取操作成功";
if (gongkuang.config_type == "05")
{
try
{
test test = db.test.Single(c => c.testid == gongkuang.testid);
double multiple = gongkuang.Multiple == null ? 1 : (double)gongkuang.Multiple;
double addNumber = gongkuang.AddNumber == null ? 0 : (double)gongkuang.AddNumber;
test.value = Convert.ToString(modbusReturn.value * multiple + addNumber);
}
catch (Exception ex)
{
LogMg.AddError(ex);
LogMg.AddDebug("找不到工况对应的检测点，gongkuangid=" + gongkuang.id + " testid=" + gongkuang.testid);
}
}
}
else
{
command.execute_result = 0; //标记为执行失败
gongkuang.execute_comment = "执行读取操作失败";
}
command.execute_comment = modbusReturn.ToString();
}
if (command.read_or_write == 1) //写写写写写写写写写写写写写写写
{
GuangDaiCommunicationModbus.writedata(ws, wscid, address, ushort.Parse(gongkuang.read_register), int.Parse(gongkuang.function_code), gongkuang.data_type, gongkuang.decode_order, short.Parse(command.value), modbusReturn);
// GuangDaiService.config config = ws.doConfig(wscid, Convert.ToInt32(gongkuang.write_register), (int)command.read_or_write, Convert.ToInt32(command.value), "");
// LogManager.AddDebug(String.Format("ws.transmitTransparently({0},{1}, {2}, {3}, {4}) 返回结果是 {5} ", wscid, gongkuang.write_register, command.read_or_write, "-1", "", flag));
command.state = 1; //标志为已发送
if (modbusReturn.success == true)
{
command.execute_result = 1; //标记为执行成功
gongkuang.write_value = command.value;
gongkuang.execute_comment = "执行写操作成功";
}
else
{
command.execute_result = 0; //标记为执行失败
gongkuang.execute_comment = "执行写操作失败";
}
command.execute_comment = modbusReturn.ToString();
}
gongkuang.execute_datetime = DateTime.Now;
command.complete_datetime = DateTime.Now;
}
catch (Exception ex)
{
command.execute_result = 0; //标记为执行失败
command.execute_comment = "执行命令失败,服务程序出现了异常";
// MessageQueue.Enqueue_DataInfo(string.Format("接收时间:【{0}】,站点：{1}, 执行工况配置失败.程序出现异常,请查看日志. ", DateTime.Now, station.name));
LogMg.AddError(ex);
}
finally
{
command.complete_datetime = DateTime.Now;
}
try
{
db.SubmitChanges();
}
catch (Exception ex)
{
LogMg.AddError(ex.ToString());
}
}
}
catch (Exception ex)
{
Args arg = (Args)state;
LogMg.AddError("异常数据库是：" + arg.dbName + " 站点id=" + arg.station_id);
LogMg.AddError(ex);
}
}
