/// <summary>
/// 根据工作台号判断工作台是否存在
/// </summary>
/// <param name="stationId">工作台号</param>
/// <returns>判断结果</returns>
public bool WorkstationExist(string stationId)
{
using (IUnitOfWork unitwork = MSSqlHelper.DataContext())
{
IWorkstationRepository workRep = new WorkstationRepository(unitwork);
return workRep.Exist(stationId);
}
}
/// <summary>
/// 申领模具
/// </summary>
/// <param name="moldUseType">模具使用类型</param>
/// <param name="moldNR">模具号</param>
/// <param name="applicantNR">申请员工工号</param>
/// <param name="operatorNR">操作员工工号</param>
/// <param name="workstationNR">操作台号</param>
/// <returns>申请信息</returns>
public Message ApplyMold(MoldUseType moldUseType, string moldNR, string applicantNR, string operatorNR, string workstationNR)
{
try
{
using (IUnitOfWork unitwork = MSSqlHelper.DataContext())
{
IWorkstationRepository workstationRep = new WorkstationRepository(unitwork);
IMoldRepository moldRep = new MoldRepository(unitwork);
Mold mold = moldRep.GetById(moldNR);
// check mold is available for apply
if (mold.State == MoldStateType.NotReturned)
{
return new Message()
{
MsgType = MsgType.Warn, Content = "模具处于不可借状态！"
}
}
;
// check workstaition reach the max mold apply number
if (workstationRep.OverAppliedMold(workstationNR) == false && Settings.Default.AllowOverApply == false)
{
return new Message()
{
MsgType = MsgType.Warn, Content = "申领已到达上限！"
}
}
;
if (mold.CurrentCuttimes != null && mold.MaxCuttimes != null)
{
if (mold.CurrentCuttimes.Value > mold.MaxCuttimes.Value)
{
return(new Message()
{
MsgType = MsgType.Warn, Content = "模具压接次数超过上限！"
});
}
}
IPositionRepository positionRep = new PositionRepository(unitwork);
Position position = positionRep.GetByFacilictyNR(moldNR);
//set value of storage record
IStorageRecordRepository recordRep = new StorageRecordRepository(unitwork);
StorageRecord storageRecord = new StorageRecord();
storageRecord.StorageRecordNR = GuidUtil.GenerateGUID();
storageRecord.PositionId = position.PositionID;
storageRecord.Source = position.PositionNR;
storageRecord.Destination = workstationNR;
storageRecord.OperatorId = operatorNR;
storageRecord.ApplicantId = applicantNR;
storageRecord.Quantity = 1;
storageRecord.Date = DateTime.Now;
storageRecord.TargetNR = moldNR;
storageRecord.RecordType = (StorageRecordType)moldUseType;
// add new storage record
recordRep.Add(storageRecord);
// update mold last apply storage record nr
IMoldLastRecordRepository lastRecordRep = new MoldLastRecordRepository(unitwork);
MoldLastRecord lastRecord = lastRecordRep.GetByMoldNR(moldNR);
lastRecord.StorageRecordNR = storageRecord.StorageRecordNR;
// update mold state
mold = moldRep.GetById(storageRecord.TargetNR);
mold.State = MoldStateType.NotReturned;
// update the workstation current mold count
Workstation workstation = workstationRep.GetById(storageRecord.Destination);
workstation.CurrentMoldCount++;
unitwork.Submit();
return(new Message()
{
MsgType = MsgType.OK, Content = "申领成功"
});
}
}
catch (Exception ex)
{
LogUtil.log.Error(ex.ToString());
return(new Message()
{
MsgType = MsgType.Error, Content = "请核实所填数据的准确性"
});
}
}
/// <summary>
/// 模具移动工作台
/// </summary>
/// <param name="moldNR">模具号</param>
/// <param name="operatorNR">操作员工号</param>
/// <param name="targetWStationNR">目标工作台号</param>
/// <returns>移动信息</returns>
public Message MoldMoveWorkStation(string moldNR, string operatorNR, string targetWStationNR)
{
try
{
using (IUnitOfWork unitwork = MSSqlHelper.DataContext())
{
IWorkstationRepository workstationRep = new WorkstationRepository(unitwork);
IMoldRepository moldRep = new MoldRepository(unitwork);
IEmployeeRepository empRep = new EmployeeRepository(unitwork);
Mold mold = moldRep.GetById(moldNR);
if (!empRep.Exist(operatorNR))
{
return new Message()
{
MsgType = MsgType.Warn, Content = "操作员不存在！"
}
}
;
if (mold == null)
{
return new Message()
{
MsgType = MsgType.Warn, Content = "模具不存在！"
}
}
;
Workstation tworkstation = workstationRep.GetById(targetWStationNR);
if (tworkstation == null)
{
return new Message()
{
MsgType = MsgType.Warn, Content = "目标工作台不存在！"
}
}
;
// check mold is available for move
if (mold.State != MoldStateType.NotReturned)
{
return new Message()
{
MsgType = MsgType.Warn, Content = "模具未被借用，请先借用！"
}
}
;
MoldView moldview = moldRep.GetMoldViewByMoldNR(moldNR);
string currentWorkPosi = moldview.StorageRecordNR == null ? string.Empty : moldRep.GetMoldCurrPosiByRecordNR((Guid)moldview.StorageRecordNR);
// if(workstationRep.GetById(currentWorkPosi)==null)
// return new Message() { MsgType = MsgType.Warn, Content = "模具正在使用的工作台号已经被修改，请先归还此模具再做后续操作！" };
if (currentWorkPosi.Equals(targetWStationNR))
{
return new Message()
{
MsgType = MsgType.Warn, Content = "模具已经在此工作台，不可重复移动！"
}
}
;
// check workstaition reach the max mold apply number
if (workstationRep.OverAppliedMold(targetWStationNR) == false && Settings.Default.AllowOverApply == false)
{
return new Message()
{
MsgType = MsgType.Warn, Content = "目标工作台已经到达模具使用上限！"
}
}
;
IPositionRepository positionRep = new PositionRepository(unitwork);
Position position = positionRep.GetByFacilictyNR(moldNR);
//set value of storage record
IStorageRecordRepository recordRep = new StorageRecordRepository(unitwork);
StorageRecord storageRecord = new StorageRecord();
storageRecord.StorageRecordNR = GuidUtil.GenerateGUID();
storageRecord.PositionId = position.PositionID;
storageRecord.Source = currentWorkPosi;
storageRecord.Destination = targetWStationNR;
storageRecord.OperatorId = operatorNR;
storageRecord.Quantity = 1;
storageRecord.Date = DateTime.Now;
storageRecord.TargetNR = moldNR;
storageRecord.RecordType = StorageRecordType.MoveWStation;
// add new storage record
recordRep.Add(storageRecord);
// update mold last apply storage record nr
IMoldLastRecordRepository lastRecordRep = new MoldLastRecordRepository(unitwork);
MoldLastRecord lastRecord = lastRecordRep.GetByMoldNR(moldNR);
lastRecord.StorageRecordNR = storageRecord.StorageRecordNR;
// update the workstation current mold count
//Workstation tworkstation = workstationRep.GetById(storageRecord.Destination);
//if(tworkstation!=null)
tworkstation.CurrentMoldCount++;
Workstation sworkstation = workstationRep.GetById(storageRecord.Source);
if (sworkstation != null)
{
sworkstation.CurrentMoldCount--;
}
unitwork.Submit();
return(new Message()
{
MsgType = MsgType.OK, Content = "移动工作台成功！"
});
}
}
catch (Exception ex)
{
LogUtil.log.Error(ex.ToString());
return(new Message()
{
MsgType = MsgType.Error, Content = "请核实所填数据的准确性"
});
}
}
/// <summary>
/// 归还模具
/// </summary>
/// <param name="moldNR">模具号</param>
/// <param name="applicantNR">申请员工工号</param>
/// <param name="operatorNR">操作员工工号</param>
/// <param name="remark">备注</param>
/// <param name="moldState">模具状态</param>
/// <returns>归还信息</returns>
public Message ReturnMold(string moldNR, string applicantNR, string operatorNR, string remark, MoldReturnStateType moldState)
{
try
{
using (IUnitOfWork unitwork = MSSqlHelper.DataContext())
{
IMoldRepository moldRep = new MoldRepository(unitwork);
Mold mold = moldRep.GetById(moldNR);
if (mold.State != MoldStateType.NotReturned)
{
return new Message()
{
MsgType = MsgType.Warn, Content = "模具已归还！"
}
}
;
StorageRecord storageRecord = new StorageRecord();
//set value of storage record
IPositionRepository positionRep = new PositionRepository(unitwork);
//Position position = positionRep.GetByFacilictyNR(moldNR);
Position position = positionRep.GetPartPoolPosition(Settings.Default.MoldPoolPosiNr);
storageRecord.PositionId = position.PositionID;
storageRecord.StorageRecordNR = GuidUtil.GenerateGUID();
storageRecord.Source = moldRep.GetMoldCurrPosiByMoldNR(moldNR);
storageRecord.Destination = position.PositionNR;
storageRecord.OperatorId = operatorNR;
storageRecord.ApplicantId = applicantNR;
storageRecord.Date = DateTime.Now;
storageRecord.Quantity = 1;
storageRecord.TargetNR = moldNR;
storageRecord.Remark = remark;
storageRecord.RecordType = StorageRecordType.Return;
// add new storage record
IStorageRecordRepository recordRep = new StorageRecordRepository(unitwork);
recordRep.Add(storageRecord);
// update mold last apply storage record nr
IMoldLastRecordRepository lastRecordRep = new MoldLastRecordRepository(unitwork);
MoldLastRecord lastRecord = lastRecordRep.GetByMoldNR(moldNR);
lastRecord.StorageRecordNR = storageRecord.StorageRecordNR;
// update mold state
mold = moldRep.GetById(storageRecord.TargetNR);
mold.State = (MoldStateType)moldState;
// update workstation mold count
IWorkstationRepository workstationRep = new WorkstationRepository(unitwork);
Workstation workstation = workstationRep.GetById(storageRecord.Source);
if (workstation != null)
{
workstation.CurrentMoldCount--;
}
unitwork.Submit();
return(new Message()
{
MsgType = MsgType.OK, Content = "归还成功"
});
}
}
catch (Exception ex)
{
LogUtil.log.Error(ex.ToString());
return(new Message()
{
MsgType = MsgType.Error, Content = ex.Message
});
}
}
