public GCode2DWidget(PrinterConfig printer, ThemeConfig theme)
{
this.printer = printer;
options = printer.Bed.RendererOptions;
this.LocalBounds = new RectangleDouble(0, 0, 100, 100);
this.AnchorAll();
// Register listeners
printer.Bed.LoadedGCodeChanged += LoadedGCodeChanged;
printer.Settings.SettingChanged += Printer_SettingChanged;
Printer_SettingChanged(this, null);
this.gridSizeMm = printer.Settings.GetValue <Vector2>(SettingsKey.bed_size);
this.gridCenterMm = printer.Settings.GetValue <Vector2>(SettingsKey.print_center);
// Acquire the bed image
bedImage = BedMeshGenerator.CreatePrintBedImage(printer);
// Create a semi-transparent overlay with the theme color
var overlay = new ImageBuffer(bedImage.Width, bedImage.Height);
overlay.NewGraphics2D().Clear(new Color(theme.BackgroundColor, 100));
// Render the overlay onto the bedImage to tint it and reduce its default overbearing light on dark contrast
bedImage.NewGraphics2D().Render(overlay, 0, 0);
// Preload GL texture for 2D bed image and use MipMaps
UiThread.RunOnIdle(() =>
{
ImageGlPlugin.GetImageGlPlugin(bedImage, createAndUseMipMaps: true);
});
}
public GCode2DWidget(PrinterConfig printer, ThemeConfig theme)
{
this.printer = printer;
options = printer.Bed.RendererOptions;
this.BackgroundColor = ActiveTheme.Instance.PrimaryBackgroundColor;
this.LocalBounds = new RectangleDouble(0, 0, 100, 100);
this.AnchorAll();
printer.Bed.LoadedGCodeChanged += LoadedGCodeChanged;
// make sure we have good settings
PrinterSettings.SettingChanged.RegisterEvent(Printer_SettingChanged, ref unregisterEvents);
Printer_SettingChanged(this, null);
this.gridSizeMm = printer.Settings.GetValue <Vector2>(SettingsKey.bed_size);
this.gridCenterMm = printer.Settings.GetValue <Vector2>(SettingsKey.print_center);
bedImage = BedMeshGenerator.CreatePrintBedImage(printer).Multiply(theme.TabBodyBackground);
}
public GCodeOptionsPanel(BedConfig sceneContext, PrinterConfig printer, ThemeConfig theme)
: base(FlowDirection.TopToBottom)
{
gcodeOptions = sceneContext.RendererOptions;
var buttonPanel = new FlowLayoutWidget()
{
HAnchor = HAnchor.Fit,
VAnchor = VAnchor.Fit
};
var buttonGroup = new ObservableCollection <GuiWidget>();
speedsButton = new RadioIconButton(AggContext.StaticData.LoadIcon("speeds.png", theme.InvertIcons), theme)
{
SiblingRadioButtonList = buttonGroup,
Name = "Speeds Button",
Checked = gcodeOptions.GCodeLineColorStyle == "Speeds",
ToolTipText = "Show Speeds".Localize(),
Margin = theme.ButtonSpacing
};
speedsButton.Click += SwitchColorModes_Click;
buttonGroup.Add(speedsButton);
buttonPanel.AddChild(speedsButton);
materialsButton = new RadioIconButton(AggContext.StaticData.LoadIcon("materials.png", theme.InvertIcons), theme)
{
SiblingRadioButtonList = buttonGroup,
Name = "Materials Button",
Checked = gcodeOptions.GCodeLineColorStyle == "Materials",
ToolTipText = "Show Materials".Localize(),
Margin = theme.ButtonSpacing
};
materialsButton.Click += SwitchColorModes_Click;
buttonGroup.Add(materialsButton);
buttonPanel.AddChild(materialsButton);
noColorButton = new RadioIconButton(AggContext.StaticData.LoadIcon("no-color.png", theme.InvertIcons), theme)
{
SiblingRadioButtonList = buttonGroup,
Name = "No Color Button",
Checked = gcodeOptions.GCodeLineColorStyle == "None",
ToolTipText = "No Color".Localize(),
Margin = theme.ButtonSpacing
};
noColorButton.Click += SwitchColorModes_Click;
buttonGroup.Add(noColorButton);
buttonPanel.AddChild(noColorButton);
this.AddChild(
new SettingsItem(
"Color View".Localize(),
theme,
optionalControls: buttonPanel,
enforceGutter: false));
buttonPanel = new FlowLayoutWidget()
{
HAnchor = HAnchor.Fit,
VAnchor = VAnchor.Fit
};
// Reset to new button group
buttonGroup = new ObservableCollection <GuiWidget>();
solidButton = new RadioIconButton(AggContext.StaticData.LoadIcon("solid.png", theme.InvertIcons), theme)
{
SiblingRadioButtonList = buttonGroup,
Name = "Solid Button",
Checked = gcodeOptions.GCodeModelView == "Semi-Transparent",
ToolTipText = "Show Semi-Transparent Model".Localize(),
Margin = theme.ButtonSpacing
};
solidButton.Click += SwitchModelModes_Click;
buttonGroup.Add(solidButton);
buttonPanel.AddChild(solidButton);
materialsButton = new RadioIconButton(AggContext.StaticData.LoadIcon("wireframe.png", theme.InvertIcons), theme)
{
SiblingRadioButtonList = buttonGroup,
Name = "Wireframe Button",
Checked = gcodeOptions.GCodeModelView == "Wireframe",
ToolTipText = "Show Wireframe Model".Localize(),
Margin = theme.ButtonSpacing
};
materialsButton.Click += SwitchModelModes_Click;
buttonGroup.Add(materialsButton);
buttonPanel.AddChild(materialsButton);
noColorButton = new RadioIconButton(AggContext.StaticData.LoadIcon("no-color.png", theme.InvertIcons), theme)
{
SiblingRadioButtonList = buttonGroup,
Name = "No Model Button",
Checked = gcodeOptions.GCodeModelView == "None",
ToolTipText = "No Model".Localize(),
Margin = theme.ButtonSpacing
};
noColorButton.Click += SwitchModelModes_Click;
buttonGroup.Add(noColorButton);
buttonPanel.AddChild(noColorButton);
this.AddChild(
new SettingsItem(
"Model View".Localize(),
buttonPanel,
theme,
enforceGutter: false));
gcodeOptions = sceneContext.RendererOptions;
var viewOptions = sceneContext.GetBaseViewOptions();
viewOptions.AddRange(new[]
{
new BoolOption(
"Moves".Localize(),
() => gcodeOptions.RenderMoves,
(value) => gcodeOptions.RenderMoves = value),
new BoolOption(
"Retractions".Localize(),
() => gcodeOptions.RenderRetractions,
(value) => gcodeOptions.RenderRetractions = value),
new BoolOption(
"Extrusion".Localize(),
() => gcodeOptions.SimulateExtrusion,
(value) => gcodeOptions.SimulateExtrusion = value),
new BoolOption(
"Transparent".Localize(),
() => gcodeOptions.TransparentExtrusion,
(value) => gcodeOptions.TransparentExtrusion = value),
new BoolOption(
"Hide Offsets".Localize(),
() => gcodeOptions.HideExtruderOffsets,
(value) => gcodeOptions.HideExtruderOffsets = value,
() => printer.Settings.GetValue <int>(SettingsKey.extruder_count) > 1),
new BoolOption(
"Sync To Print".Localize(),
() => gcodeOptions.SyncToPrint,
(value) =>
{
gcodeOptions.SyncToPrint = value;
if (!gcodeOptions.SyncToPrint)
{
// If we are turning off sync to print, set the slider to full.
//layerRenderRatioSlider.SecondValue = 1;
}
})
});
var optionsContainer = new FlowLayoutWidget(FlowDirection.TopToBottom)
{
HAnchor = HAnchor.Stretch,
VAnchor = VAnchor.Fit
};
this.AddChild(optionsContainer);
void BuildMenu()
{
foreach (var option in viewOptions.Where(option => option.IsVisible()))
{
var settingsItem = new SettingsItem(
option.Title,
theme,
new SettingsItem.ToggleSwitchConfig()
{
Name = option.Title + " Toggle",
Checked = option.IsChecked(),
ToggleAction = option.SetValue
},
enforceGutter: false);
settingsItem.Padding = settingsItem.Padding.Clone(right: 8);
optionsContainer.AddChild(settingsItem);
}
}
BuildMenu();
PropertyChangedEventHandler syncProperties = (s, e) =>
{
if (e.PropertyName == nameof(gcodeOptions.RenderBed) ||
e.PropertyName == nameof(gcodeOptions.RenderBuildVolume))
{
optionsContainer.CloseAllChildren();
BuildMenu();
}
};
gcodeOptions.PropertyChanged += syncProperties;
optionsContainer.Closed += (s, e) =>
{
gcodeOptions.PropertyChanged -= syncProperties;
};
}
public PrinterTabPage(PartWorkspace workspace, ThemeConfig theme, string tabTitle)
: base(workspace, theme, tabTitle)
{
gcodeOptions = sceneContext.RendererOptions;
view3DWidget.InteractionLayer.EditorMode = InteractionLayer.EditorType.Printer;
viewControls3D.TransformStateChanged += (s, e) =>
{
switch (e.TransformMode)
{
case ViewControls3DButtons.Translate:
if (gcode2DWidget != null)
{
gcode2DWidget.TransformState = GCode2DWidget.ETransformState.Move;
}
break;
case ViewControls3DButtons.Scale:
if (gcode2DWidget != null)
{
gcode2DWidget.TransformState = GCode2DWidget.ETransformState.Scale;
}
break;
}
};
viewControls3D.ResetView += (sender, e) =>
{
if (gcode2DWidget?.Visible == true)
{
gcode2DWidget.CenterPartInView();
}
};
var opaqueTrackColor = theme.ResolveColor(theme.BedBackgroundColor, theme.SlightShade);
LayerScrollbar = new SliceLayerSelector(printer, theme)
{
VAnchor = VAnchor.Stretch,
HAnchor = HAnchor.Right | HAnchor.Fit,
Margin = new BorderDouble(0, 4, 4, 4),
Maximum = sceneContext.LoadedGCode?.LayerCount ?? 1
};
LayerScrollbar.SolidSlider.View.TrackColor = opaqueTrackColor;
view3DWidget.InteractionLayer.AddChild(LayerScrollbar);
layerRenderRatioSlider = new DoubleSolidSlider(new Vector2(), SliceLayerSelector.SliderWidth, theme);
layerRenderRatioSlider.FirstValue = 0;
layerRenderRatioSlider.FirstValueChanged += (s, e) =>
{
sceneContext.RenderInfo.FeatureToStartOnRatio0To1 = layerRenderRatioSlider.FirstValue;
sceneContext.RenderInfo.FeatureToEndOnRatio0To1 = layerRenderRatioSlider.SecondValue;
this.Invalidate();
};
layerRenderRatioSlider.SecondValue = 1;
layerRenderRatioSlider.SecondValueChanged += (s, e) =>
{
if (printer?.Bed?.RenderInfo != null)
{
sceneContext.RenderInfo.FeatureToStartOnRatio0To1 = layerRenderRatioSlider.FirstValue;
sceneContext.RenderInfo.FeatureToEndOnRatio0To1 = layerRenderRatioSlider.SecondValue;
}
this.Invalidate();
};
view3DWidget.InteractionLayer.AddChild(layerRenderRatioSlider);
theme.ApplySliderStyle(layerRenderRatioSlider);
layerRenderRatioSlider.View.TrackColor = opaqueTrackColor;
AddSettingsTabBar(leftToRight, view3DWidget);
view3DWidget.InteractionLayer.BoundsChanged += (s, e) =>
{
SetSliderSizes();
};
printerActionsBar = new PrinterActionsBar(printer, this, theme);
theme.ApplyBottomBorder(printerActionsBar);
printerActionsBar.modelViewButton.Enabled = sceneContext.EditableScene;
// Must come after we have an instance of View3DWidget an its undo buffer
topToBottom.AddChild(printerActionsBar, 0);
var trackball = view3DWidget.InteractionLayer.Children <TrackballTumbleWidget>().FirstOrDefault();
tumbleCubeControl = view3DWidget.InteractionLayer.Children <TumbleCubeControl>().FirstOrDefault();
var position = view3DWidget.InteractionLayer.Children.IndexOf(trackball);
gcodePanel = new GCodePanel(this, printer, sceneContext, theme)
{
Name = "GCode3DWidget",
HAnchor = HAnchor.Stretch,
VAnchor = VAnchor.Stretch,
BackgroundColor = theme.InteractionLayerOverlayColor,
};
var modelViewSidePanel = view3DWidget.Descendants <VerticalResizeContainer>().FirstOrDefault();
gcodeContainer = new VerticalResizeContainer(theme, GrabBarSide.Left)
{
Width = printer?.ViewState.SelectedObjectPanelWidth ?? 200,
VAnchor = VAnchor.Stretch,
HAnchor = HAnchor.Absolute,
SplitterBarColor = theme.SplitterBackground,
SplitterWidth = theme.SplitterWidth,
Visible = false,
};
gcodeContainer.AddChild(gcodePanel);
gcodeContainer.Resized += (s, e) =>
{
if (printer != null)
{
printer.ViewState.SelectedObjectPanelWidth = gcodeContainer.Width;
}
};
modelViewSidePanel.BoundsChanged += (s, e) =>
{
gcodeContainer.Width = modelViewSidePanel.Width;
};
gcodeContainer.BoundsChanged += (s, e) =>
{
modelViewSidePanel.Width = gcodeContainer.Width;
};
var splitContainer = view3DWidget.FindDescendant("SplitContainer");
splitContainer.AddChild(gcodeContainer);
view3DContainer.AddChild(new RunningTasksWidget(theme, printer)
{
MinimumSize = new Vector2(100, 0),
Margin = new BorderDouble(top: printerActionsBar.Height + 1, left: favoritesBar.LocalBounds.Width + favoritesBar.DeviceMarginAndBorder.Width + 1),
VAnchor = VAnchor.Top | VAnchor.Fit,
HAnchor = HAnchor.Left | HAnchor.Fit,
});
// Create and append new widget
gcode2DWidget = new GCode2DWidget(printer, theme)
{
Visible = (printer.ViewState.ViewMode == PartViewMode.Layers2D)
};
view3DWidget.InteractionLayer.AddChild(gcode2DWidget, position + 1);
SetSliderSizes();
this.SetViewMode(printer.ViewState.ViewMode);
this.LayerScrollbar.Margin = LayerScrollbar.Margin.Clone(top: tumbleCubeControl.Height + tumbleCubeControl.Margin.Height + 4);
// On load, switch to gcode view if previously editing gcode file. Listeners would normally do this but workspace loads before this UI widget
if (this?.printerActionsBar?.modelViewButton is GuiWidget button)
{
button.Enabled = sceneContext.EditableScene;
if (sceneContext.ContentType == "gcode" &&
this?.printerActionsBar?.layers3DButton is GuiWidget gcodeButton)
{
gcodeButton.InvokeClick();
}
}
// Register listeners
printer.ViewState.VisibilityChanged += ProcessOptionalTabs;
printer.ViewState.ViewModeChanged += ViewState_ViewModeChanged;
printer.Bed.RendererOptions.PropertyChanged += RendererOptions_PropertyChanged;
// register for communication messages
printer.Connection.CommunicationStateChanged += Connection_CommunicationStateChanged;
printer.Connection.PauseOnLayer += Connection_PauseOnLayer;
printer.Connection.FilamentRunout += Connection_FilamentRunout;
ApplicationController.Instance.ApplicationError += ApplicationController_ApplicationError;
ApplicationController.Instance.ApplicationEvent += ApplicationController_ApplicationEvent;
sceneContext.LoadedGCodeChanged += BedPlate_LoadedGCodeChanged;
}
public PrinterTabPage(PrinterConfig printer, ThemeConfig theme, string tabTitle)
: base(printer, printer.Bed, theme, tabTitle)
{
gcodeOptions = sceneContext.RendererOptions;
view3DWidget.meshViewerWidget.EditorMode = MeshViewerWidget.EditorType.Printer;
viewControls3D.TransformStateChanged += (s, e) =>
{
switch (e.TransformMode)
{
case ViewControls3DButtons.Translate:
if (gcode2DWidget != null)
{
gcode2DWidget.TransformState = GCode2DWidget.ETransformState.Move;
}
break;
case ViewControls3DButtons.Scale:
if (gcode2DWidget != null)
{
gcode2DWidget.TransformState = GCode2DWidget.ETransformState.Scale;
}
break;
}
};
viewControls3D.ResetView += (sender, e) =>
{
if (gcode2DWidget?.Visible == true)
{
gcode2DWidget.CenterPartInView();
}
};
printer.ViewState.ViewModeChanged += ViewState_ViewModeChanged;
LayerScrollbar = new SliceLayerSelector(printer, sceneContext, theme)
{
VAnchor = VAnchor.Stretch,
HAnchor = HAnchor.Right | HAnchor.Fit,
Margin = new BorderDouble(0, 4, 4, 4),
Maximum = sceneContext.LoadedGCode?.LayerCount ?? 1
};
view3DWidget.InteractionLayer.AddChild(LayerScrollbar);
layerRenderRatioSlider = new DoubleSolidSlider(new Vector2(), SliceLayerSelector.SliderWidth);
layerRenderRatioSlider.FirstValue = 0;
layerRenderRatioSlider.FirstValueChanged += (s, e) =>
{
sceneContext.RenderInfo.FeatureToStartOnRatio0To1 = layerRenderRatioSlider.FirstValue;
sceneContext.RenderInfo.FeatureToEndOnRatio0To1 = layerRenderRatioSlider.SecondValue;
this.Invalidate();
};
layerRenderRatioSlider.SecondValue = 1;
layerRenderRatioSlider.SecondValueChanged += (s, e) =>
{
if (printer?.Bed?.RenderInfo != null)
{
sceneContext.RenderInfo.FeatureToStartOnRatio0To1 = layerRenderRatioSlider.FirstValue;
sceneContext.RenderInfo.FeatureToEndOnRatio0To1 = layerRenderRatioSlider.SecondValue;
}
this.Invalidate();
};
view3DWidget.InteractionLayer.AddChild(layerRenderRatioSlider);
sceneContext.LoadedGCodeChanged += BedPlate_LoadedGCodeChanged;
AddSettingsTabBar(leftToRight, view3DWidget);
view3DWidget.InteractionLayer.BoundsChanged += (s, e) =>
{
SetSliderSizes();
};
printerActionsBar = new PrinterActionsBar(printer, this, theme);
theme.ApplyBottomBorder(printerActionsBar);
printerActionsBar.modelViewButton.Enabled = sceneContext.EditableScene;
// Must come after we have an instance of View3DWidget an its undo buffer
topToBottom.AddChild(printerActionsBar, 0);
var trackball = view3DWidget.InteractionLayer.Children <TrackballTumbleWidget>().FirstOrDefault();
tumbleCubeControl = view3DWidget.InteractionLayer.Children <TumbleCubeControl>().FirstOrDefault();
var position = view3DWidget.InteractionLayer.Children.IndexOf(trackball);
gcodePanel = new GCodePanel(printer, sceneContext, theme)
{
Name = "GCode3DWidget",
HAnchor = HAnchor.Stretch,
VAnchor = VAnchor.Stretch,
BackgroundColor = theme.InteractionLayerOverlayColor,
};
var modelViewSidePanel = view3DWidget.Descendants <LeftResizeContainer>().FirstOrDefault();
gcodeContainer = new LeftResizeContainer(theme)
{
Width = printer?.ViewState.SelectedObjectPanelWidth ?? 200,
VAnchor = VAnchor.Stretch,
HAnchor = HAnchor.Absolute,
SpliterBarColor = theme.SplitterBackground,
SplitterWidth = theme.SplitterWidth,
Visible = false,
};
gcodeContainer.AddChild(gcodePanel);
gcodeContainer.Resized += (s, e) =>
{
if (printer != null)
{
printer.ViewState.SelectedObjectPanelWidth = gcodeContainer.Width;
}
};
modelViewSidePanel.BoundsChanged += (s, e) =>
{
gcodeContainer.Width = modelViewSidePanel.Width;
};
gcodeContainer.BoundsChanged += (s, e) =>
{
modelViewSidePanel.Width = gcodeContainer.Width;
};
var splitContainer = view3DWidget.FindNamedChildRecursive("SplitContainer");
splitContainer.AddChild(gcodeContainer);
view3DContainer.AddChild(new RunningTasksWidget(theme)
{
MinimumSize = new Vector2(100, 0),
Margin = new BorderDouble(top: printerActionsBar.Height),
VAnchor = VAnchor.Top | VAnchor.Fit,
HAnchor = HAnchor.Left | HAnchor.Fit,
});
// Create and append new widget
gcode2DWidget = new GCode2DWidget(printer, theme)
{
Visible = (printer.ViewState.ViewMode == PartViewMode.Layers2D)
};
view3DWidget.InteractionLayer.AddChild(gcode2DWidget, position + 1);
SetSliderSizes();
this.SetViewMode(printer.ViewState.ViewMode);
printer.ViewState.ConfigurePrinterChanged += ConfigurePrinter_Changed;
printer.Bed.RendererOptions.PropertyChanged += RendererOptions_PropertyChanged;
printer.Connection.CommunicationStateChanged.RegisterEvent((s, e) =>
{
this.SetSliderVisibility();
}, ref unregisterEvents);
}
