public override void Initialize()
        {
            base.Initialize();

            //Show only the virtual controllers supported on this platform
            VirtualControllerTypes[] vcTypes = EnumUtility.GetValues <VirtualControllerTypes> .EnumValues;

            for (int i = 0; i < vcTypes.Length; i++)
            {
                VirtualControllerTypes vControllerType = vcTypes[i];

                //Continue if not supported
                if (VControllerHelper.IsVControllerSupported(vControllerType,
                                                             TRBotOSPlatform.CurrentOS) == false)
                {
                    continue;
                }

                CachedVCTypesStr += vControllerType.ToString();

                if (i < (vcTypes.Length - 1))
                {
                    CachedVCTypesStr += ", ";
                }
            }
        }
Exemplo n.º 2
0
        private void HandleReloadBoth()
        {
            //Check if the periodic input value changed, and enable/disable the routine if we should
            long periodicEnabled = DataHelper.GetSettingInt(SettingsConstants.PERIODIC_INPUT_ENABLED, 0L);
            if (periodicEnabled == 0)
            {
                RoutineHandler.FindRoutine(RoutineConstants.PERIODIC_INPUT_ROUTINE_ID, out int rIndex);

                //Remove the routine if it exists
                if (rIndex >= 0)
                {
                    RoutineHandler.RemoveRoutine(rIndex);
                }
            }
            else
            {
                RoutineHandler.FindRoutine(RoutineConstants.PERIODIC_INPUT_ROUTINE_ID, out int rIndex);

                //Add the routine if it doesn't exist
                if (rIndex < 0)
                {
                    RoutineHandler.AddRoutine(new PeriodicInputRoutine()); 
                }
            }

            //Check if the virtual controller type was changed
            if (LastVControllerTypeChanged() == true)
            {
                VirtualControllerTypes lastVControllerType = (VirtualControllerTypes)DataHelper.GetSettingInt(SettingsConstants.LAST_VCONTROLLER_TYPE, 0L);
                VirtualControllerTypes supportedVCType = VControllerHelper.ValidateVirtualControllerType(lastVControllerType, TRBotOSPlatform.CurrentOS);

                //Show a message saying the previous value wasn't supported
                if (VControllerHelper.IsVControllerSupported(lastVControllerType, TRBotOSPlatform.CurrentOS) == false)
                {
                    MsgHandler.QueueMessage($"Current virtual controller {lastVControllerType} is not supported by the {TRBotOSPlatform.CurrentOS} platform. Switched it to the default of {supportedVCType} for this platform.");                
                    using (BotDBContext context = DatabaseManager.OpenContext())
                    {
                        Settings lastVControllerSetting = DataHelper.GetSettingNoOpen(SettingsConstants.LAST_VCONTROLLER_TYPE, context);
                        lastVControllerSetting.ValueInt = (long)supportedVCType;
                        context.SaveChanges();
                    }
                }

                ChangeVControllerType(supportedVCType);

                return; 
            }
        
            ReinitVControllerCount();
        }
        public override void ExecuteCommand(EvtChatCommandArgs args)
        {
            List <string> arguments = args.Command.ArgumentsAsList;

            long lastVControllerType         = DataHelper.GetSettingInt(SettingsConstants.LAST_VCONTROLLER_TYPE, 0L);
            VirtualControllerTypes curVCType = (VirtualControllerTypes)lastVControllerType;

            //See the virtual controller
            if (arguments.Count == 0)
            {
                QueueMessage($"The current virtual controller is {(VirtualControllerTypes)lastVControllerType}. To set the virtual controller, add one as an argument: {CachedVCTypesStr}");
                return;
            }

            //Invalid number of arguments
            if (arguments.Count > 1)
            {
                QueueMessage(UsageMessage);
                return;
            }

            using (BotDBContext context = DatabaseManager.OpenContext())
            {
                //Check if the user has the ability to set the type
                User user = DataHelper.GetUserNoOpen(args.Command.ChatMessage.Username, context);

                if (user != null && user.HasEnabledAbility(PermissionConstants.SET_VCONTROLLER_TYPE_ABILITY) == false)
                {
                    QueueMessage("You don't have the ability to set the virtual controller type!");
                    return;
                }
            }

            string vControllerStr = arguments[0];

            //Parse
            if (EnumUtility.TryParseEnumValue(vControllerStr, out VirtualControllerTypes parsedVCType) == false)
            {
                QueueMessage($"Please enter a valid virtual controller: {CachedVCTypesStr}");
                return;
            }

            //Same type
            if (parsedVCType == curVCType && DataContainer.ControllerMngr.Initialized == true)
            {
                QueueMessage($"The current virtual controller is already {curVCType}!");
                return;
            }

            //Make sure this virtual controller is supported on this platform
            if (VControllerHelper.IsVControllerSupported(parsedVCType, TRBotOSPlatform.CurrentOS) == false)
            {
                QueueMessage($"{parsedVCType} virtual controllers are not supported on {TRBotOSPlatform.CurrentOS} platforms.");
                return;
            }

            using (BotDBContext context = DatabaseManager.OpenContext())
            {
                //Set the value and save
                Settings lastVControllerSetting = DataHelper.GetSettingNoOpen(SettingsConstants.LAST_VCONTROLLER_TYPE, context);
                lastVControllerSetting.ValueInt = (long)parsedVCType;

                context.SaveChanges();
            }

            //Stop and halt all inputs
            InputHandler.StopAndHaltAllInputs();

            try
            {
                //Assign the new controller manager
                IVirtualControllerManager controllerMngr = VControllerHelper.GetVControllerMngrForType(parsedVCType);

                if (controllerMngr == null)
                {
                    QueueMessage($"Virtual controller manager of new type {parsedVCType} failed to initialize. This indicates an invalid {SettingsConstants.LAST_VCONTROLLER_TYPE} setting in the database or an unimplemented platform.");
                    return;
                }

                //Dispose the controller manager
                DataContainer.ControllerMngr.Dispose();

                DataContainer.SetCurVControllerType(parsedVCType);

                DataContainer.SetControllerManager(controllerMngr);

                DataContainer.ControllerMngr.Initialize();

                //Ensure we clamp the controller count to the correct value for this virtual controller manager
                int minControllerCount = DataContainer.ControllerMngr.MinControllers;
                int maxControllerCount = DataContainer.ControllerMngr.MaxControllers;

                int joystickCount    = (int)DataHelper.GetSettingInt(SettingsConstants.JOYSTICK_COUNT, 0L);
                int newJoystickCount = joystickCount;

                if (joystickCount < minControllerCount)
                {
                    QueueMessage($"Controller count of {joystickCount} is invalid. Clamping to the min of {minControllerCount}.");
                    newJoystickCount = minControllerCount;
                }
                else if (joystickCount > maxControllerCount)
                {
                    QueueMessage($"Controller count of {joystickCount} is invalid. Clamping to the max of {maxControllerCount}.");
                    newJoystickCount = maxControllerCount;
                }

                if (joystickCount != newJoystickCount)
                {
                    using (BotDBContext context = DatabaseManager.OpenContext())
                    {
                        //Adjust the joystick count setting
                        Settings joystickCountSetting = DataHelper.GetSettingNoOpen(SettingsConstants.JOYSTICK_COUNT, context);
                        joystickCountSetting.ValueInt = newJoystickCount;

                        context.SaveChanges();
                    }
                }

                int acquiredCount = DataContainer.ControllerMngr.InitControllers(newJoystickCount);

                QueueMessage($"Set virtual controller to {parsedVCType} with {acquiredCount} controller(s) and reset all running inputs!");
            }
            catch (Exception e)
            {
                DataContainer.MessageHandler.QueueMessage($"Error changing virtual controller type: {e.Message}");
                return;
            }
            finally
            {
                //Resume inputs
                InputHandler.ResumeRunningInputs();
            }
        }
Exemplo n.º 4
0
        private void HandleReloadBoth()
        {
            //Check for changes in the log level
            Serilog.Events.LogEventLevel logLevel = (Serilog.Events.LogEventLevel)DataHelper.GetSettingInt(SettingsConstants.LOG_LEVEL, (long)Serilog.Events.LogEventLevel.Information);
            if (logLevel != TRBotLogger.MinLoggingLevel)
            {
                TRBotLogger.Logger.Information($"Detected change in logging level - changing the logging level from {TRBotLogger.MinLoggingLevel} to {logLevel}");
                TRBotLogger.SetLogLevel(logLevel);
            }

            //Check if the periodic input value changed, and enable/disable the routine if we should
            long periodicEnabled = DataHelper.GetSettingInt(SettingsConstants.PERIODIC_INPUT_ENABLED, 0L);

            if (periodicEnabled == 0)
            {
                RoutineHandler.FindRoutine(RoutineConstants.PERIODIC_INPUT_ROUTINE_ID, out int rIndex);

                //Remove the routine if it exists
                if (rIndex >= 0)
                {
                    RoutineHandler.RemoveRoutine(rIndex);
                }
            }
            else
            {
                RoutineHandler.FindRoutine(RoutineConstants.PERIODIC_INPUT_ROUTINE_ID, out int rIndex);

                //Add the routine if it doesn't exist
                if (rIndex < 0)
                {
                    RoutineHandler.AddRoutine(new PeriodicInputRoutine());
                }
            }

            //Check if the virtual controller type was changed
            if (LastVControllerTypeChanged() == true)
            {
                VirtualControllerTypes lastVControllerType = (VirtualControllerTypes)DataHelper.GetSettingInt(SettingsConstants.LAST_VCONTROLLER_TYPE, 0L);
                VirtualControllerTypes supportedVCType     = VControllerHelper.ValidateVirtualControllerType(lastVControllerType, TRBotOSPlatform.CurrentOS);

                //Show a message saying the previous value wasn't supported
                if (VControllerHelper.IsVControllerSupported(lastVControllerType, TRBotOSPlatform.CurrentOS) == false)
                {
                    MsgHandler.QueueMessage($"Current virtual controller {lastVControllerType} is not supported by the {TRBotOSPlatform.CurrentOS} platform. Switched it to the default of {supportedVCType} for this platform.");
                    using (BotDBContext context = DatabaseManager.OpenContext())
                    {
                        Settings lastVControllerSetting = DataHelper.GetSettingNoOpen(SettingsConstants.LAST_VCONTROLLER_TYPE, context);
                        lastVControllerSetting.ValueInt = (long)supportedVCType;
                        context.SaveChanges();
                    }
                }

                ChangeVControllerType(supportedVCType);
            }
            else
            {
                ReinitVControllerCount();
            }

            //Handle message throttling changes
            MessageThrottlingOptions msgThrottle = (MessageThrottlingOptions)DataHelper.GetSettingInt(SettingsConstants.MESSAGE_THROTTLE_TYPE, 0L);
            long msgTime          = DataHelper.GetSettingInt(SettingsConstants.MESSAGE_COOLDOWN, 30000L);
            long msgThrottleCount = DataHelper.GetSettingInt(SettingsConstants.MESSAGE_THROTTLE_COUNT, 20L);

            if (msgThrottle != MsgHandler.CurThrottleOption)
            {
                TRBotLogger.Logger.Information("Detected change in message throttling type - changing message throttler.");
            }

            MsgHandler.SetMessageThrottling(msgThrottle, new MessageThrottleData(msgTime, msgThrottleCount));
        }
Exemplo n.º 5
0
        public void Initialize()
        {
            if (Initialized == true)
            {
                return;
            }

            //Use invariant culture
            Thread.CurrentThread.CurrentCulture = System.Globalization.CultureInfo.InvariantCulture;

            //Set up the logger
            string logPath = Path.Combine(LoggingConstants.LogFolderPath, LoggingConstants.LOG_FILE_NAME);

            if (Utilities.FileHelpers.ValidatePathForFile(logPath) == false)
            {
                Console.WriteLine("Logger path cannot be validated. This is a problem! Double check the path is correct.");
            }

            //Set up the logger
            //Cap the size at 10 MB
            TRBotLogger.SetupLogger(logPath, Serilog.Events.LogEventLevel.Verbose,
                                    Serilog.RollingInterval.Day, 1024L * 1024L * 10L, TimeSpan.FromSeconds(60d));

            //Initialize database
            string databasePath = Path.Combine(DataConstants.DataFolderPath, DataConstants.DATABASE_FILE_NAME);

            TRBotLogger.Logger.Information($"Validating database at: {databasePath}");
            if (Utilities.FileHelpers.ValidatePathForFile(databasePath) == false)
            {
                TRBotLogger.Logger.Error($"Cannot create database path at {databasePath}. Check if you have permission to write to this directory. Aborting.");
                return;
            }

            TRBotLogger.Logger.Information("Database path validated! Initializing database and importing migrations.");

            DatabaseManager.SetDatabasePath(databasePath);
            DatabaseManager.InitAndMigrateContext();

            TRBotLogger.Logger.Information("Checking to initialize default values for missing database entries.");

            //Check for and initialize default values if the database was newly created or needs updating
            int addedDefaultEntries = DataHelper.InitDefaultData();

            if (addedDefaultEntries > 0)
            {
                TRBotLogger.Logger.Information($"Added {addedDefaultEntries} additional entries to the database.");
            }

            //Set the logger's log level
            long logLevel = DataHelper.GetSettingInt(SettingsConstants.LOG_LEVEL, (long)Serilog.Events.LogEventLevel.Information);

            TRBotLogger.SetLogLevel((Serilog.Events.LogEventLevel)logLevel);

            TRBotLogger.Logger.Information("Initializing client service");

            //Initialize client service
            InitClientService();

            //If the client service doesn't exist, we can't continue
            if (ClientService == null)
            {
                TRBotLogger.Logger.Error("Client service failed to initialize; please check your settings. Aborting.");
                return;
            }

            //Set client service and message cooldown
            MsgHandler.SetClientService(ClientService);

            MessageThrottlingOptions msgThrottleOption = (MessageThrottlingOptions)DataHelper.GetSettingInt(SettingsConstants.MESSAGE_THROTTLE_TYPE, 0L);
            long msgCooldown      = DataHelper.GetSettingInt(SettingsConstants.MESSAGE_COOLDOWN, 30000L);
            long msgThrottleCount = DataHelper.GetSettingInt(SettingsConstants.MESSAGE_THROTTLE_COUNT, 20L);

            MsgHandler.SetMessageThrottling(msgThrottleOption, new MessageThrottleData(msgCooldown, msgThrottleCount));

            //Subscribe to events
            UnsubscribeEvents();
            SubscribeEvents();

            DataContainer.SetMessageHandler(MsgHandler);
            DataContainer.SetDataReloader(DataReloader);

            TRBotLogger.Logger.Information("Setting up virtual controller manager.");

            VirtualControllerTypes lastVControllerType = (VirtualControllerTypes)DataHelper.GetSettingInt(SettingsConstants.LAST_VCONTROLLER_TYPE, 0L);

            VirtualControllerTypes curVControllerType = VControllerHelper.ValidateVirtualControllerType(lastVControllerType, TRBotOSPlatform.CurrentOS);

            //Show a message saying the previous value wasn't supported and save the changes
            if (VControllerHelper.IsVControllerSupported(lastVControllerType, TRBotOSPlatform.CurrentOS) == false)
            {
                MsgHandler.QueueMessage($"Current virtual controller {lastVControllerType} is not supported by the {TRBotOSPlatform.CurrentOS} platform. Switched it to the default of {curVControllerType} for this platform.");

                using (BotDBContext context = DatabaseManager.OpenContext())
                {
                    Settings lastVControllerSetting = DataHelper.GetSettingNoOpen(SettingsConstants.LAST_VCONTROLLER_TYPE, context);
                    lastVControllerSetting.ValueInt = (long)curVControllerType;
                    context.SaveChanges();
                }
            }

            DataContainer.SetCurVControllerType(curVControllerType);

            IVirtualControllerManager controllerMngr = VControllerHelper.GetVControllerMngrForType(curVControllerType);

            DataContainer.SetControllerManager(controllerMngr);

            int controllerCount = 0;

            //Clamp the controller count to the min and max allowed by the virtual controller manager
            using (BotDBContext context = DatabaseManager.OpenContext())
            {
                Settings joystickCountSetting = DataHelper.GetSettingNoOpen(SettingsConstants.JOYSTICK_COUNT, context);

                int minCount = DataContainer.ControllerMngr.MinControllers;
                int maxCount = DataContainer.ControllerMngr.MaxControllers;

                //Validate controller count
                if (joystickCountSetting.ValueInt < minCount)
                {
                    MsgHandler.QueueMessage($"Controller count of {joystickCountSetting.ValueInt} in database is invalid. Clamping to the min of {minCount}.");
                    joystickCountSetting.ValueInt = minCount;
                    context.SaveChanges();
                }
                else if (joystickCountSetting.ValueInt > maxCount)
                {
                    MsgHandler.QueueMessage($"Controller count of {joystickCountSetting.ValueInt} in database is invalid. Clamping to the max of {maxCount}.");
                    joystickCountSetting.ValueInt = maxCount;
                    context.SaveChanges();
                }

                controllerCount = (int)joystickCountSetting.ValueInt;
            }

            DataContainer.ControllerMngr.Initialize();
            int acquiredCount = DataContainer.ControllerMngr.InitControllers(controllerCount);

            TRBotLogger.Logger.Information($"Setting up virtual controller {curVControllerType} and acquired {acquiredCount} controllers!");

            CmdHandler = new CommandHandler();
            CmdHandler.Initialize(DataContainer, RoutineHandler);

            DataReloader.SoftDataReloadedEvent -= OnSoftReload;
            DataReloader.SoftDataReloadedEvent += OnSoftReload;

            DataReloader.HardDataReloadedEvent -= OnHardReload;
            DataReloader.HardDataReloadedEvent += OnHardReload;

            //Initialize routines
            InitRoutines();

            //Cache our parser
            InputParser = new Parser();

            Initialized = true;
        }