public static GuiWidget PrintProgressWidget(PrinterConfig printer, ThemeConfig theme)
{
var bodyRow = new GuiWidget()
{
HAnchor = HAnchor.Stretch,
VAnchor = VAnchor.Top | VAnchor.Fit,
// BackgroundColor = new Color(theme.Colors.PrimaryBackgroundColor, 128),
MinimumSize = new Vector2(275, 140),
};
// Progress section
var expandingContainer = new HorizontalSpacer()
{
VAnchor = VAnchor.Fit | VAnchor.Center
};
bodyRow.AddChild(expandingContainer);
var topToBottom = new FlowLayoutWidget(FlowDirection.TopToBottom)
{
VAnchor = VAnchor.Center | VAnchor.Fit,
HAnchor = HAnchor.Stretch,
};
expandingContainer.AddChild(topToBottom);
var progressRow = new GuiWidget()
{
HAnchor = HAnchor.Stretch,
VAnchor = VAnchor.Fit
};
topToBottom.AddChild(progressRow);
var progressDial = new ProgressDial(theme)
{
HAnchor = HAnchor.Center,
VAnchor = VAnchor.Center,
Height = 200 * DeviceScale,
Width = 200 * DeviceScale,
Name = "Print Progress Dial"
};
progressRow.AddChild(progressDial);
// create a set of controls to do baby stepping on the first layer
var babySteppingControls = new FlowLayoutWidget(FlowDirection.TopToBottom)
{
HAnchor = HAnchor.Right,
VAnchor = VAnchor.Center | VAnchor.Fit,
};
babySteppingControls.Width = 80 * GuiWidget.DeviceScale;
progressRow.AddChild(babySteppingControls);
// add in the move up button
var babyStepAmount = .02;
var upButton = babySteppingControls.AddChild(new IconButton(StaticData.Instance.LoadIcon("Up Arrow.png", 32, 32).SetToColor(theme.TextColor), theme)
{
HAnchor = HAnchor.Center,
VAnchor = VAnchor.Absolute,
Margin = 0,
BackgroundRadius = theme.ButtonRadius,
ToolTipText = "Raise extruder".Localize() + "\n\n*" + "First layer only".Localize() + "*",
});
upButton.Click += (s, e) =>
{
printer.Settings.ForTools <double>(SettingsKey.baby_step_z_offset, (key, value, i) =>
{
if (printer.Connection.ActiveExtruderIndex == i)
{
var currentZ = value + babyStepAmount;
printer.Settings.SetValue(key, currentZ.ToString("0.##"));
}
});
};
// add in the current position display
var zTuning = babySteppingControls.AddChild(new ZTuningWidget(printer, theme, false)
{
HAnchor = HAnchor.Center | HAnchor.Fit,
VAnchor = VAnchor.Fit,
Margin = new BorderDouble(0, 3, 0, 0),
Padding = 0,
});
babySteppingControls.AddChild(new TextWidget("Z Offset".Localize(), pointSize: 8)
{
TextColor = theme.TextColor,
Margin = new BorderDouble(0, 0, 0, 3),
AutoExpandBoundsToText = true,
HAnchor = HAnchor.Center,
});
// add in the move down button
var downButton = babySteppingControls.AddChild(new IconButton(StaticData.Instance.LoadIcon("Down Arrow.png", 32, 32).SetToColor(theme.TextColor), theme)
{
HAnchor = HAnchor.Center,
VAnchor = VAnchor.Absolute,
Margin = 0,
BackgroundRadius = new RadiusCorners(theme.ButtonRadius, theme.ButtonRadius, 0, 0),
ToolTipText = "Lower extruder".Localize() + "\n\n*" + "First layer only".Localize() + "*",
});
downButton.Click += (s, e) =>
{
printer.Settings.ForTools <double>(SettingsKey.baby_step_z_offset, (key, value, i) =>
{
if (printer.Connection.ActiveExtruderIndex == i)
{
var currentZ = value - babyStepAmount;
printer.Settings.SetValue(key, currentZ.ToString("0.##"));
}
});
};
// build the bottom row to hold re-slice
var bottomRow = new GuiWidget()
{
HAnchor = HAnchor.Stretch,
VAnchor = VAnchor.Fit
};
topToBottom.AddChild(bottomRow);
var resliceMessageRow = new FlowLayoutWidget(FlowDirection.TopToBottom)
{
HAnchor = HAnchor.Stretch,
VAnchor = VAnchor.Fit,
Visible = false
};
topToBottom.AddChild(resliceMessageRow);
var timeContainer = new FlowLayoutWidget()
{
HAnchor = HAnchor.Center | HAnchor.Fit,
Margin = 3
};
bottomRow.AddChild(timeContainer);
// we can only reslice on 64 bit, because in 64 bit we always have the gcode loaded
if (IntPtr.Size == 8 || ApplicationController.Instance.Allow32BitReSlice)
{
var resliceButton = new TextButton("Re-Slice", theme)
{
VAnchor = VAnchor.Center,
HAnchor = HAnchor.Right,
Margin = new BorderDouble(0, 0, 7, 0),
Name = "Re-Slice Button",
ToolTipText = "Apply changes to this print".Localize() + "\n\n*" + "Plating and settings changes can be applied".Localize() + "*"
};
theme.MakeRoundedButton(resliceButton);
bool activelySlicing = false;
resliceButton.Click += (s, e) =>
{
resliceButton.Enabled = false;
UiThread.RunOnIdle(async() =>
{
bool doSlicing = !activelySlicing && printer.Bed.EditContext.SourceItem != null;
if (doSlicing)
{
var errors = printer.ValidateSettings();
if (errors.Any(err => err.ErrorLevel == ValidationErrorLevel.Error))
{
doSlicing = false;
ApplicationController.Instance.ShowValidationErrors("Slicing Error".Localize(), errors);
}
}
if (doSlicing)
{
activelySlicing = true;
if (bottomRow.Name == null)
{
bottomRow.Name = await printer.Bed.EditContext.GCodeFilePath(printer);
}
await ApplicationController.Instance.Tasks.Execute("Saving".Localize(), printer, printer.Bed.SaveChanges);
// start up a new slice on a background thread
await ApplicationController.Instance.SliceItemLoadOutput(
printer,
printer.Bed.Scene,
await printer.Bed.EditContext.GCodeFilePath(printer));
// Switch to the 3D layer view if on Model view
if (printer.ViewState.ViewMode == PartViewMode.Model)
{
printer.ViewState.ViewMode = PartViewMode.Layers3D;
}
resliceMessageRow.Visible = true;
resliceMessageRow.VAnchor = VAnchor.Absolute;
resliceMessageRow.VAnchor = VAnchor.Fit;
}
else
{
resliceButton.Enabled = true;
}
});
};
bottomRow.AddChild(resliceButton);
// setup the message row
{
// when it is done queue it to the change to gcode stream
var switchMessage = "Switch to new G-Code?\n\nBefore you switch, check that you are seeing the changes you expect.".Localize();
resliceMessageRow.AddChild(new WrappedTextWidget(switchMessage, theme.DefaultFontSize, textColor: theme.TextColor)
{
Margin = new BorderDouble(7, 3)
});
var switchButtonRow = new FlowLayoutWidget(FlowDirection.RightToLeft)
{
HAnchor = HAnchor.Stretch
};
resliceMessageRow.AddChild(switchButtonRow);
var switchButton = new TextButton("Switch", theme)
{
VAnchor = VAnchor.Center,
Margin = new BorderDouble(5),
Name = "Switch Button"
};
theme.MakeRoundedButton(switchButton);
switchButtonRow.AddChild(switchButton);
switchButton.Click += async(s, e) =>
{
if (printer.Connection != null &&
(printer.Connection.Printing || printer.Connection.Paused))
{
printer.Connection.SwitchToGCode(await printer.Bed.EditContext.GCodeFilePath(printer));
bottomRow.Name = await printer.Bed.EditContext.GCodeFilePath(printer);
}
activelySlicing = false;
resliceButton.Enabled = true;
resliceMessageRow.Visible = false;
};
var cancelButton = new TextButton("Cancel", theme)
{
VAnchor = VAnchor.Center,
Margin = new BorderDouble(0, 5),
Name = "Cancel Re-Slice Button"
};
theme.MakeRoundedButton(cancelButton);
switchButtonRow.AddChild(cancelButton);
cancelButton.Click += async(s, e) =>
{
await ApplicationController.Instance.SliceItemLoadOutput(
printer,
printer.Bed.Scene,
bottomRow.Name);
activelySlicing = false;
resliceButton.Enabled = true;
resliceMessageRow.Visible = false;
};
}
}
timeContainer.AddChild(new ImageWidget(StaticData.Instance.LoadIcon("fa-clock_24.png", 24, 24).SetToColor(theme.TextColor))
{
VAnchor = VAnchor.Center
});
var timeStack = new FlowLayoutWidget(FlowDirection.TopToBottom)
{
Margin = new BorderDouble(10, 0, 0, 0),
Padding = new BorderDouble(5, 0, 0, 0),
VAnchor = VAnchor.Center | VAnchor.Fit
};
timeContainer.AddChild(timeStack);
var timePrinted = new TextWidget("", pointSize: 16, textColor: theme.TextColor)
{
AutoExpandBoundsToText = true,
HAnchor = HAnchor.Center,
};
timeStack.AddChild(timePrinted);
var timeToEnd = new TextWidget("", pointSize: 9, textColor: theme.TextColor)
{
AutoExpandBoundsToText = true,
HAnchor = HAnchor.Center,
};
timeStack.AddChild(timeToEnd);
var runningInterval = UiThread.SetInterval(() =>
{
int totalSecondsPrinted = printer.Connection.SecondsPrinted;
int hoursPrinted = totalSecondsPrinted / (60 * 60);
int minutesPrinted = totalSecondsPrinted / 60 - hoursPrinted * 60;
var secondsPrinted = totalSecondsPrinted % 60;
// TODO: Consider if the consistency of a common time format would look and feel better than changing formats based on elapsed duration
timePrinted.Text = GetFormatedTime(hoursPrinted, minutesPrinted, secondsPrinted);
int totalSecondsToEnd = printer.Connection.SecondsToEnd;
int hoursToEnd = totalSecondsToEnd / (60 * 60);
int minutesToEnd = totalSecondsToEnd / 60 - hoursToEnd * 60;
var secondsToEnd = totalSecondsToEnd % 60;
timeToEnd.Text = GetFormatedTime(hoursToEnd, minutesToEnd, secondsToEnd);
progressDial.LayerIndex = printer.Connection.CurrentlyPrintingLayer;
if (progressDial.LayerIndex > 0)
{
babySteppingControls.Visible = false;
}
progressDial.LayerCompletedRatio = printer.Connection.RatioIntoCurrentLayerSeconds;
progressDial.CompletedRatio = printer.Connection.PercentComplete / 100;
switch (printer.Connection.CommunicationState)
{
case CommunicationStates.PreparingToPrint:
case CommunicationStates.Printing:
case CommunicationStates.Paused:
bodyRow.Visible = true;
break;
default:
bodyRow.Visible = false;
break;
}
}, 1);
bodyRow.Closed += (s, e) => UiThread.ClearInterval(runningInterval);
bodyRow.Visible = false;
return(bodyRow);
}