public static void Affinity(TestFitPackage tf)
{
foreach (ProgramPackage program in tf.ProgramPackages)
{
int accessibility = 0;
foreach (Char dir in program.AccessDirections)
{
if (dir == '1')
{
accessibility++;
}
}
program.Affinity = new List <int>();
if (program.IsPrivate && accessibility <= 1)
{
program.Affinity.Add(1);
}
else if (!program.IsPrivate && accessibility == 1)
{
program.Affinity.Add(2);
program.Affinity.Add(3);
}
else if (accessibility == 4)
{
program.Affinity.Add(3);
program.Affinity.Add(2);
}
}
}
public static CirculationPackage CirculationTypes(TestFitPackage tf)
{
//Trim circulation axis to floor plate region, shatter, and characterize.
List <Curve> circulationAxis = tf.FloorPlanPackage.CirculationAxisCurves;
Curve floorProfile = tf.FloorPlanPackage.FloorProfile;
List <Curve> trimmedCirculationAxis = new List <Curve>();
foreach (Curve axis in circulationAxis)
{
Curve trimmedAxis = Curves.TrimWithClosedCurve(floorProfile, axis);
trimmedCirculationAxis.Add(trimmedAxis);
}
//Shatter trimmed axis.
List <Curve> circulationSegments = Curves.ShatterToSegments(trimmedCirculationAxis);
//Characterize segments and format as CirculationPackage.
CirculationPackage classifiedAxisSegments = Select.CirculationConfig(tf, circulationSegments);
//Unify main curves before offset.
List <Curve> simplifiedCurves = Curves.JoinColinear(classifiedAxisSegments.MainCurves);
classifiedAxisSegments.MainCurves = simplifiedCurves;
return(classifiedAxisSegments);
}
public static void Priority(TestFitPackage tf)
{
for (int i = 0; i < tf.ProgramPackages.Count; i++)
{
tf.ProgramPackages[i].Priority = i;
}
}
public static TestFitPackage DieFive(double side)
{
//A simple test fit configuration modeled after the five side of a since die.
//Center point is core.
//Other four are structure.
//TODO: Implement circulation.
double frc = side / 6;
double r = side / 5;
Curve floorProfile = RegionsFactory.RectangleWHC(side, side, Point3d.Origin);
Curve coreCurve = RegionsFactory.CenteredCircleRadius(r);
List <Curve> strCurves = new List <Curve>();
strCurves.Add(RegionsFactory.CircleCR(new Point3d(2 * frc, 2 * frc, 0), r));
strCurves.Add(RegionsFactory.CircleCR(new Point3d(-2 * frc, 2 * frc, 0), r));
strCurves.Add(RegionsFactory.CircleCR(new Point3d(-2 * frc, -2 * frc, 0), r));
strCurves.Add(RegionsFactory.CircleCR(new Point3d(2 * frc, -2 * frc, 0), r));
FloorPlanPackage FloorPlan = new FloorPlanPackage(floorProfile, coreCurve, null, strCurves, null, null);
TestFitPackage TestFit = new TestFitPackage(FloorPlan, null);
return(TestFit);
}
public static CirculationPackage CirculationConfig(TestFitPackage tf, List <Curve> axisSegments)
{
//Classifications.
List <bool> TouchesEdge = new List <bool>();
List <bool> TouchesCore = new List <bool>();
List <bool> IsLong = new List <bool>();
double avgLength = Utils.GetAverageLength(axisSegments);
Interval lengthRange = Utils.GetLengthRange(axisSegments);
for (int i = 0; i < axisSegments.Count; i++)
{
bool floorProfileEdgeTest = Confirm.CurvesIntersect(axisSegments[i], tf.FloorPlanPackage.FloorProfile, true);
TouchesEdge.Add(floorProfileEdgeTest);
bool coreEdgeTest = Confirm.CurvesIntersect(axisSegments[i], tf.FloorPlanPackage.CoreProfile, true);
TouchesCore.Add(coreEdgeTest);
bool isLong = (axisSegments[i].GetLength() > avgLength) ? true : false;
IsLong.Add(isLong);
}
List <Curve> MainCirculationCurves = new List <Curve>();
List <Curve> OptionalCirculationCurves = new List <Curve>();
for (int i = 0; i < axisSegments.Count; i++)
{
if (TouchesCore[i] == false && TouchesEdge[i] == false)
{
MainCirculationCurves.Add(axisSegments[i]);
}
else if (TouchesCore[i] == true)
{
MainCirculationCurves.Add(axisSegments[i]);
}
else if (TouchesEdge[i] == true && IsLong[i] == true)
{
MainCirculationCurves.Add(axisSegments[i]);
}
else
{
OptionalCirculationCurves.Add(axisSegments[i]);
}
}
bool hasOneAxis = Confirm.AllAxisColinear(MainCirculationCurves);
if (hasOneAxis)
{
Curve singleAxisCurve = Curves.ExtendToBounds(tf.FloorPlanPackage.FloorProfile, MainCirculationCurves[0]);
MainCirculationCurves.Clear();
MainCirculationCurves.Add(singleAxisCurve);
}
CirculationPackage ClassifiedCirculation = new CirculationPackage(MainCirculationCurves, OptionalCirculationCurves);
return(ClassifiedCirculation);
}
public void CircleInSquare_CircleIsSmaller()
{
TestFitPackage TestEnv = TestFitFactory.DieFive(1);
bool result = Logic.Relationships.Confirm.TestFit.CoreIsSmaller(TestEnv);
Assert.IsTrue(result);
}
public void DieFive_ReturnsOneRegion()
{
TestFitPackage TestEnv = TestFitFactory.DieFive(1);
List <Brep> resultGeometry = Logic.Relationships.Identify.FloorPlateRegions(TestEnv);
bool testResult = (resultGeometry.Count == 1) ? true : false;
Assert.IsTrue(testResult);
}
protected override void SolveInstance(IGH_DataAccess DA)
{
TestFitPackage tf = null;
DA.GetData(0, ref tf);
bool active = false;
DA.GetData(1, ref active);
if (!active)
{
return;
}
//Parse FloorPlanPackage for main working area(s).
List <Brep> baseFloorRegions = Identify.FloorPlateRegions(tf);
//Categorize circulation segments into "main" and "option" types.
CirculationPackage circ = Identify.CirculationTypes(tf);
//Sanitization: generate and remove all obstacles from workable space. (Circulation, Structure, etc.)
List <Brep> validFloorRegions = Identify.AvailableFloorSpace(baseFloorRegions, tf, circ);
//First-pass subdivision: coarse division based on proximity and proportion.
List <Brep> optimizedFloorRegions = Identify.OptimalFloorSpaceConfiguration(validFloorRegions, tf);
//Parse ProgramPackage(s) and format information/relationships into manifest.
ProgramManifest pm = Identify.ProgramManifest(tf);
//Assign program targets to each zone, based on priority + affinity, and subdivide to rooms.
ZoneManifest zm = Identify.ZoneManifest(optimizedFloorRegions, pm, tf);
//Populate zones and solve test fit.
Terrain.Solution(zm, pm);
List <string> debugText = new List <string>();
foreach (ZonePackage zone in zm.Zones)
{
string output = null;
foreach (int target in zone.ProgramTargets)
{
output = output + target + " ";
}
debugText.Add(output);
}
DA.SetData(0, pm);
DA.SetData(1, zm);
DA.SetDataList(2, debugText);
}
//Tests specifically about fidelity of the TestFit problem proposed.
public static bool Fidelity(TestFitPackage tf)
{
List <bool> testResults = new List <bool>();
//Tests may get a little redundant here for the sake of a readable list of restrictions.
testResults.Add(MainProfileIsClosed(tf));
testResults.Add(CoreProfileIsClosed(tf));
testResults.Add(CoreIsSmaller(tf));
testResults.Add(AllStructureCurvesAreClosed(tf));
return(true);
}
public static bool CoreIsSmaller(TestFitPackage tf)
{
Brep floor = Brep.CreatePlanarBreps(tf.FloorPlanPackage.FloorProfile)[0];
Brep core = Brep.CreatePlanarBreps(tf.FloorPlanPackage.CoreProfile)[0];
double floorArea = floor.GetArea();
double coreArea = core.GetArea();
bool isSmaller = (coreArea < floorArea) ? true : false;
return(isSmaller);
}
public static bool AllStructureCurvesAreClosed(TestFitPackage tf)
{
List <Curve> curvesToCheck = tf.FloorPlanPackage.StructureProfiles;
foreach (Curve curve in curvesToCheck)
{
if (curve.IsClosed != true)
{
return(false);
}
}
return(true);
}
/// <summary>
/// Identify class methods parse data from TestFitPackage to prepare for calculations.
/// Geometry is sent to Select class methods for processing. Each select method is solving a limited relationship problem.
/// While Select methods may be over-specific and overlap with each other sometimes, they're just different groupings of all other general methods.
/// Structure allows for quick readability and for Select methods to be directly tested without having to set up a whole test fit.
/// </summary>
/// <param name="tf"></param>
/// <returns></returns>
public static List <Brep> FloorPlateRegions(TestFitPackage tf)
{
//Parse floor and core profiles from TestFitPackage.
Curve baseCurve = tf.FloorPlanPackage.FloorProfile;
Curve coreCurve = tf.FloorPlanPackage.CoreProfile;
Brep baseSurface = Brep.CreatePlanarBreps(baseCurve)[0];
Brep coreSurface = Brep.CreatePlanarBreps(coreCurve)[0];
List <Brep> AllRegions = Breps.SplitTwoBreps(baseSurface, coreSurface);
//Determine base floor plate region.
List <Brep> ValidFloorRegions = Select.FloorFromCore(AllRegions, coreSurface);
return(ValidFloorRegions);
}
public static void Distribution(TestFitPackage tf)
{
List <ProgramPackage> programs = tf.ProgramPackages;
int maximizedCount = 0;
double nonMaximizedUse = 0;
foreach (ProgramPackage program in programs)
{
if (program.Quota == 0)
{
maximizedCount++;
}
else
{
double quotaArea = program.OccupationArea * program.Quota;
double usage = quotaArea / tf.FloorPlanPackage.BaseArea;
nonMaximizedUse = nonMaximizedUse + usage;
}
}
double maximizedUse = (maximizedCount != 0) ? (1 - nonMaximizedUse) / maximizedCount : 0;
List <double> distributions = new List <double>();
for (int i = 0; i < tf.ProgramPackages.Count; i++)
{
if (programs[i].Quota == 0)
{
distributions.Add(maximizedUse * 100);
}
else
{
double quotaArea = Brep.CreatePlanarBreps(programs[i].OccupationBoundary)[0].GetArea() * programs[i].Quota;
double usage = quotaArea / tf.FloorPlanPackage.BaseArea;
distributions.Add(usage * 100);
}
}
for (int i = 0; i < programs.Count; i++)
{
programs[i].Distribution = distributions[i];
}
}
public static void Target(TestFitPackage tf)
{
foreach (ProgramPackage program in tf.ProgramPackages)
{
if (program.Quota != 0)
{
program.Target = program.Quota;
}
else
{
double availableArea = (program.Distribution / 100) * tf.FloorPlanPackage.BaseArea;
double target = availableArea / program.OccupationArea;
program.Target = Convert.ToInt32(Math.Round(target));
}
program.Remaining = program.Target;
}
}
public static ProgramManifest ProgramManifest(TestFitPackage tf)
{
//Parse base statistics from floor areas.
var approximateTotalArea = tf.FloorPlanPackage.BaseArea;
//Perform measurements and confirmations.
var isPossible = Confirm.Program.RequestIsPossible(tf.ProgramPackages, approximateTotalArea);
var maximizedCount = Confirm.Program.MaximizedCount(tf.ProgramPackages);
Update.Program.Distribution(tf);
Update.Program.Target(tf);
Update.Program.Affinity(tf);
Update.Program.Enmity(tf);
Update.Program.Priority(tf);
ProgramManifest pm = new ProgramManifest(tf.ProgramPackages, isPossible, maximizedCount);
pm.AllAdvice = tf.AllAdvice;
return(pm);
}
protected override void SolveInstance(IGH_DataAccess DA)
{
FloorPlanPackage floorPlan = null;
DA.GetData(0, ref floorPlan);
List <ProgramPackage> programInfo = new List <ProgramPackage>();
DA.GetDataList(1, programInfo);
TestFitPackage TestFit = new TestFitPackage(floorPlan, programInfo);
//Perform tests for data fidelity.
bool allTestsPassed = Confirm.TestFit.Fidelity(TestFit);
if (!allTestsPassed)
{
AddRuntimeMessage(GH_RuntimeMessageLevel.Error, "Test Fit Package is not valid.");
}
DA.SetData(0, TestFit);
}
protected override void SolveInstance(IGH_DataAccess DA)
{
ProgramManifest pmOld = null;
if (!DA.GetData(0, ref pmOld))
{
return;
}
var pm = Utils.DeepClone(pmOld);
ZoneManifest zmOld = null;
if (!DA.GetData(1, ref zmOld))
{
return;
}
var zm = Utils.DeepClone(zmOld);
var allAdvice = new List <AdvicePackage>();
DA.GetDataList(2, allAdvice);
if (pm.AllAdvice != null)
{
allAdvice.AddRange(pm.AllAdvice);
}
foreach (AdvicePackage advice in allAdvice)
{
Logic.Update.Iteration.ApplyAdvice(advice, zm, pm);
}
var tf = new TestFitPackage(zm.FloorPlan, pm.ProgramPackages, allAdvice);
DA.SetData(0, tf);
}
public static List <Brep> AvailableFloorSpace(List <Brep> floorRegions, TestFitPackage tf, CirculationPackage circ)
{
//Parse exemption profiles.
List <Curve> exemptionCurves = tf.FloorPlanPackage.ExemptionProfiles;
List <Brep> exemptionRegions = new List <Brep>();
foreach (Curve exemption in exemptionCurves)
{
Brep exemptionSurface = Brep.CreatePlanarBreps(exemption)[0];
exemptionRegions.Add(exemptionSurface);
}
//Remove spaces designated by exemptions.
List <Brep> nonExemptRegions = Select.NotExemptRegions(floorRegions, exemptionRegions);
//Parse regions of core that need egress and circulation axis.
List <Curve> coreAccessCurves = tf.FloorPlanPackage.CoreAccessCurves;
List <Curve> circulationCurves = tf.FloorPlanPackage.CirculationAxisCurves;
//Remove space for core access and egress requirements. Only if circulation axis do not already connect all egress requirements.
List <Curve> coreCurvesToGiveEgress = Select.CoreCurvesWithoutEgress(coreAccessCurves, circulationCurves);
if (coreCurvesToGiveEgress.Count != 0)
{
List <Curve> bestSourceOfEgress = Select.BestSourceOfEgress(coreCurvesToGiveEgress, circulationCurves);
List <Brep> newExemptionsForEgress = Select.OrthogonalEgress(coreCurvesToGiveEgress, bestSourceOfEgress);
//nonExemptRegions = newExemptionsForEgress;
nonExemptRegions = Select.NotExemptRegions(nonExemptRegions, newExemptionsForEgress);
}
//Remove circulation zones of main circulation items.
List <Curve> mainCirculationSegments = circ.MainCurves;
List <Brep> circulationExemptions = new List <Brep>();
foreach (Curve segment in mainCirculationSegments)
{
int minDist = 4;
Curve extendedSegment = segment.Extend(CurveEnd.Both, minDist / 2, CurveExtensionStyle.Line);
Brep circRegion = Brep.CreatePlanarBreps(Curves.OffsetClosed(extendedSegment, minDist / 2, true))[0];
circulationExemptions.Add(circRegion);
}
//nonExemptRegions = Select.NotCirculationRegions(nonExemptRegions, circulationExemptions);
nonExemptRegions = Select.NotExemptRegions(nonExemptRegions, circulationExemptions);
//Remove columns. Still unsure if this is the best move.
//Disabled for now, for performance reasons. Maybe check collision on population?
List <Curve> structureObstacles = tf.FloorPlanPackage.StructureProfiles;
List <Brep> structureExemptions = new List <Brep>();
foreach (Curve str in structureObstacles)
{
structureExemptions.Add(Brep.CreatePlanarBreps(str)[0]);
}
//nonExemptRegions = Select.NotExemptRegions(nonExemptRegions, structureExemptions);
return(nonExemptRegions);
}
public static ZoneManifest ZoneManifest(List <Brep> zonesToParse, ProgramManifest pm, TestFitPackage tf)
{
List <ZonePackage> zpList = new List <ZonePackage>();
double totalArea = 0;
foreach (Brep zone in zonesToParse)
{
ZonePackage zp = new ZonePackage(zone);
if (zp.BaseArea < 10)
{
//Stopgap solution for micro-zones generated by weird circulation corners.
continue;
}
totalArea = totalArea + zp.BaseArea;
EdgeCurves edgeCurvePackage = Select.ZoneEdgeCurves(zone, tf, zonesToParse);
Update.Zone.EdgeClassification(zp, edgeCurvePackage);
Update.Zone.Adjacencies(zp);
Update.Zone.AffinityType(zp);
zpList.Add(zp);
}
ZoneManifest zm = new ZoneManifest(zpList, totalArea)
{
FloorPlan = tf.FloorPlanPackage
};
Update.Program.ZonePreference(pm, zm);
Update.Zone.Popularity(zm, pm);
Update.Zone.ProgramPriority(zm, pm);
Update.Zone.ReservedArea(zm, pm);
Update.Zone.ProgramTargets(zm, pm);
Update.Zone.RoomConfiguration(zm, pm);
return(zm);
}
public static List <Brep> OptimalFloorSpaceConfiguration(List <Brep> validFloorRegions, TestFitPackage tf)
{
Curve perimeterCurve = tf.FloorPlanPackage.FloorProfile;
Curve coreCurve = tf.FloorPlanPackage.CoreProfile;
List <Brep> zonesToSlice = new List <Brep>();
List <Brep> optimizedZones = new List <Brep>();
//Identify zones with irregular proximity or shape.
foreach (Brep region in validFloorRegions)
{
bool intersectsPerimeter = Confirm.CurveRegionIntersection(perimeterCurve, region);
bool intersectsCore = Confirm.CurveRegionIntersection(coreCurve, region);
if (intersectsPerimeter && intersectsCore)
{
zonesToSlice.Add(region);
}
else
{
optimizedZones.Add(region);
}
}
//Cut them into more manageable pieces.
List <Curve> splitterCurves = Select.BestSplitterCurves(zonesToSlice, tf.FloorPlanPackage.CirculationAxisCurves, tf.FloorPlanPackage.CoreProfile);
for (int i = 0; i < zonesToSlice.Count; i++)
{
List <Brep> splitBreps = Breps.SplitByCurve(zonesToSlice[i], splitterCurves[i]);
foreach (Brep zone in splitBreps)
{
optimizedZones.Add(zone);
}
}
//Identify donut zones (zones with a hole in the middle).
for (int i = optimizedZones.Count - 1; i >= 0; i--)
{
bool isNotDonut = Confirm.RegionIsNotDonut(optimizedZones[i]);
//Cut up the donuts.
if (!isNotDonut)
{
List <Curve> donutSplitCurves = Select.DonutSplittingCurves(optimizedZones[i]);
foreach (Curve crv in donutSplitCurves)
{
//RhinoDoc.ActiveDoc.Objects.AddCurve(crv);
}
List <Brep> unDonutZones = Breps.SplitByCurves(optimizedZones[i], donutSplitCurves);
optimizedZones.RemoveAt(i);
foreach (Brep newZone in unDonutZones)
{
optimizedZones.Add(newZone);
}
}
}
return(optimizedZones);
}
public static bool CoreProfileIsClosed(TestFitPackage tf)
{
return(tf.FloorPlanPackage.CoreProfile.IsClosed);
}
