/// <summary>
/// Create one SweptBlend
/// </summary>
private void CreateSweptBlend()
{
try
{
#region Create top and bottom profiles and path curve
Autodesk.Revit.DB.XYZ pnt1 = new Autodesk.Revit.DB.XYZ(0, 0, 0);
Autodesk.Revit.DB.XYZ pnt2 = new Autodesk.Revit.DB.XYZ(1, 0, 0);
Autodesk.Revit.DB.XYZ pnt3 = new Autodesk.Revit.DB.XYZ(1, 1, 0);
Autodesk.Revit.DB.XYZ pnt4 = new Autodesk.Revit.DB.XYZ(0, 1, 0);
Autodesk.Revit.DB.XYZ pnt5 = new Autodesk.Revit.DB.XYZ(0, 0, 1);
CurveArrArray arrarr1 = new CurveArrArray();
CurveArray arr1 = new CurveArray();
arr1.Append(Line.CreateBound(pnt1, pnt2));
arr1.Append(Line.CreateBound(pnt2, pnt3));
arr1.Append(Line.CreateBound(pnt3, pnt4));
arr1.Append(Line.CreateBound(pnt4, pnt1));
arrarr1.Append(arr1);
Autodesk.Revit.DB.XYZ pnt6 = new Autodesk.Revit.DB.XYZ(0.5, 0, 0);
Autodesk.Revit.DB.XYZ pnt7 = new Autodesk.Revit.DB.XYZ(1, 0.5, 0);
Autodesk.Revit.DB.XYZ pnt8 = new Autodesk.Revit.DB.XYZ(0.5, 1, 0);
Autodesk.Revit.DB.XYZ pnt9 = new Autodesk.Revit.DB.XYZ(0, 0.5, 0);
CurveArrArray arrarr2 = new CurveArrArray();
CurveArray arr2 = new CurveArray();
arr2.Append(Line.CreateBound(pnt6, pnt7));
arr2.Append(Line.CreateBound(pnt7, pnt8));
arr2.Append(Line.CreateBound(pnt8, pnt9));
arr2.Append(Line.CreateBound(pnt9, pnt6));
arrarr2.Append(arr2);
SweepProfile bottomProfile = m_revit.Create.NewCurveLoopsProfile(arrarr1);
SweepProfile topProfile = m_revit.Create.NewCurveLoopsProfile(arrarr2);
Autodesk.Revit.DB.XYZ pnt10 = new Autodesk.Revit.DB.XYZ(5, 0, 0);
Autodesk.Revit.DB.XYZ pnt11 = new Autodesk.Revit.DB.XYZ(0, 20, 0);
Curve curve = Line.CreateBound(pnt10, pnt11);
Autodesk.Revit.DB.XYZ normal = Autodesk.Revit.DB.XYZ.BasisZ;
SketchPlane sketchPlane = CreateSketchPlane(normal, Autodesk.Revit.DB.XYZ.Zero);
#endregion
// here create one swept blend
SweptBlend newSweptBlend1 = m_creationFamily.NewSweptBlend(true, curve, sketchPlane, bottomProfile, topProfile);
// move to proper place
Autodesk.Revit.DB.XYZ transPoint1 = new Autodesk.Revit.DB.XYZ(11, 32, 0);
ElementTransformUtils.MoveElement(m_familyDocument, newSweptBlend1.Id, transPoint1);
}
catch (Exception e)
{
m_errCount++;
m_errorInfo += "Unexpected exceptions occur in CreateSweptBlend: " + e.ToString() + "\r\n";
}
}
/// <summary>
/// Create a new swept blend form.
/// The NewSweptBlend method requires the
/// input profile to be in the XY plane.
/// </summary>
public void CreateNewSweptBlend(Document doc)
{
Debug.Assert(doc.IsFamilyDocument,
"this method will only work in a family document");
Application app = doc.Application;
Autodesk.Revit.Creation.Application creapp
= app.Create;
CurveArrArray curvess0
= creapp.NewCurveArrArray();
CurveArray curves0 = new CurveArray();
XYZ p00 = creapp.NewXYZ(0, 7.5, 0);
XYZ p01 = creapp.NewXYZ(0, 15, 0);
// changing Z to 1 in the following line fails:
XYZ p02 = creapp.NewXYZ(-1, 10, 0);
//curves0.Append( creapp.NewLineBound( p00, p01 ) ); // 2013
curves0.Append(Line.CreateBound(p00, p01)); // 2014
curves0.Append(Line.CreateBound(p01, p02));
curves0.Append(Line.CreateBound(p02, p00));
curvess0.Append(curves0);
CurveArrArray curvess1 = creapp.NewCurveArrArray();
CurveArray curves1 = new CurveArray();
XYZ p10 = creapp.NewXYZ(7.5, 0, 0);
XYZ p11 = creapp.NewXYZ(15, 0, 0);
// changing the Z value in the following line fails:
XYZ p12 = creapp.NewXYZ(10, -1, 0);
curves1.Append(Line.CreateBound(p10, p11));
curves1.Append(Line.CreateBound(p11, p12));
curves1.Append(Line.CreateBound(p12, p10));
curvess1.Append(curves1);
SweepProfile sweepProfile0
= creapp.NewCurveLoopsProfile(curvess0);
SweepProfile sweepProfile1
= creapp.NewCurveLoopsProfile(curvess1);
XYZ pnt10 = new XYZ(5, 0, 0);
XYZ pnt11 = new XYZ(0, 20, 0);
Curve curve = Line.CreateBound(pnt10, pnt11);
XYZ normal = XYZ.BasisZ;
SketchPlane splane = CreateSketchPlane(
doc, normal, XYZ.Zero);
try
{
SweptBlend sweptBlend = doc.FamilyCreate.NewSweptBlend(
true, curve, splane, sweepProfile0, sweepProfile1);
}
catch (Exception ex)
{
Util.ErrorMsg("NewSweptBlend exception: " + ex.Message);
}
}
/// <summary>
/// Create a new swept blend form using arcs to
/// define circular start and end profiles and an
/// arc path. The NewSweptBlend method requires
/// the input profiles to be in the XY plane.
/// </summary>
public void CreateNewSweptBlendArc(Document doc)
{
Debug.Assert(doc.IsFamilyDocument,
"this method will only work in a family document");
Application app = doc.Application;
Autodesk.Revit.Creation.Application creapp
= app.Create;
Autodesk.Revit.Creation.FamilyItemFactory credoc
= doc.FamilyCreate;
#region Original code for Revit 2012
#if COMPILE_ORIGINAL_CODE
XYZ pnt1 = new XYZ(0, -1, 0);
XYZ pnt2 = new XYZ(1, 0, 0);
XYZ pnt3 = new XYZ(0, 1, 0);
XYZ pnt4 = new XYZ(-1, 0, 0);
Arc aArc1 = creapp.NewArc(pnt1, pnt3, pnt2);
Arc aArc2 = creapp.NewArc(pnt3, pnt1, pnt4);
CurveArrArray arrarr1 = new CurveArrArray();
SweepProfile bottomProfile
= creapp.NewCurveLoopsProfile(arrarr1);
CurveArray arr1 = new CurveArray();
arr1.Append(aArc1);
arr1.Append(aArc2);
XYZ pnt6 = new XYZ(0, -2, 0);
XYZ pnt7 = new XYZ(2, 0, 0);
XYZ pnt8 = new XYZ(0, 2, 0);
XYZ pnt9 = new XYZ(-2, 0, 0);
Arc aArc3 = creapp.NewArc(pnt6, pnt8, pnt7);
Arc aArc4 = creapp.NewArc(pnt8, pnt6, pnt9);
CurveArrArray arrarr2 = new CurveArrArray();
CurveArray arr2 = new CurveArray();
arr2.Append(aArc3);
arr2.Append(aArc4);
arrarr2.Append(arr2);
SweepProfile topProfile
= creapp.NewCurveLoopsProfile(arrarr2);
XYZ pnt10 = new XYZ(0, 0, 0);
XYZ pnt11 = new XYZ(0, 5, 0);
XYZ pnt122 = new XYZ(2.5, 2.5, 0);
Arc testArc = creapp.NewArc(pnt10, pnt11, pnt122);
Curve curve = (Curve)testArc;
Plane geometryPlane = creapp.NewPlane(
XYZ.BasisZ, XYZ.Zero);
SketchPlane sketchPlane = doc.NewSketchPlane(
geometryPlane);
SweptBlend aSweptBlend = doc.NewSweptBlend(
true, curve, sketchPlane, bottomProfile,
topProfile);
#endif // COMPILE_ORIGINAL_CODE
#endregion // Original code for Revit 2012
XYZ px = XYZ.BasisX;
XYZ py = XYZ.BasisY;
Arc arc1 = Arc.Create(-px, px, -py);
Arc arc2 = Arc.Create(px, -px, py);
CurveArray arr1 = new CurveArray();
arr1.Append(arc1);
arr1.Append(arc2);
CurveArrArray arrarr1 = new CurveArrArray();
arrarr1.Append(arr1);
SweepProfile bottomProfile
= creapp.NewCurveLoopsProfile(arrarr1);
px += px;
py += py;
Arc arc3 = Arc.Create(-px, px, -py);
Arc arc4 = Arc.Create(px, -px, py);
CurveArray arr2 = new CurveArray();
arr2.Append(arc3);
arr2.Append(arc4);
CurveArrArray arrarr2 = new CurveArrArray();
arrarr2.Append(arr2);
SweepProfile topProfile
= creapp.NewCurveLoopsProfile(arrarr2);
XYZ p0 = XYZ.Zero;
XYZ p5 = 5 * XYZ.BasisY;
XYZ pmid = new XYZ(2.5, 2.5, 0);
Arc testArc = Arc.Create(p0, p5, pmid);
Plane geometryPlane = creapp.NewPlane(
XYZ.BasisZ, XYZ.Zero);
SketchPlane sketchPlane = SketchPlane.Create(
doc, geometryPlane);
SweptBlend aSweptBlend = credoc.NewSweptBlend(
true, testArc, sketchPlane, bottomProfile,
topProfile);
}
private void Stream( ArrayList data, SweptBlend sweptBlend )
{
data.Add( new Snoop.Data.ClassSeparator( typeof( SweptBlend ) ) );
data.Add( new Snoop.Data.Enumerable( "Bottom profile", sweptBlend.BottomProfile ) );
data.Add( new Snoop.Data.Enumerable( "Top profile", sweptBlend.TopProfile ) );
data.Add( new Snoop.Data.Object( "Bottom profile symbol", sweptBlend.BottomProfileSymbol ) );
data.Add( new Snoop.Data.Object( "Top profile symbol", sweptBlend.TopProfileSymbol ) );
data.Add( new Snoop.Data.Object( "Bottom sketch", sweptBlend.BottomSketch ) );
data.Add( new Snoop.Data.Object( "Top sketch", sweptBlend.TopSketch ) );
data.Add( new Snoop.Data.Object( "Path sketch", sweptBlend.PathSketch ) );
data.Add( new Snoop.Data.Object( "Selected path", sweptBlend.SelectedPath ) );
}
public FamilyGeometryForm(Autodesk.Revit.DB.GenericForm form)
{
Id = form.Id.IntegerValue;
this.geomVisibility = new GeometryVisibility(form.GetVisibility());
//Autodesk.Revit.DB.Parameter sketchPlaneParam = form.get_Parameter(Autodesk.Revit.DB.BuiltInParameter.SKETCH_PLANE_PARAM);
//if(sketchPlaneParam != null)
//{
// this.
//}
IsSolidGeometry = form.IsSolid;
if (form.Subcategory == null)
{
SubcategoryName = "";
}
else
{
SubcategoryName = form.Subcategory.Name;
}
if (form is Extrusion)
{
FormType = FormTypeEnum.Extrusion;
Extrusion ex = form as Extrusion;
Sketch extrusionProfile = ex.Sketch;
GeometrySketch gs = new GeometrySketch(extrusionProfile);
List_Profiles = new List <GeometrySketch> {
gs
};
}
else if (form is Blend)
{
FormType = FormTypeEnum.Blend;
Blend bl = form as Blend;
GeometrySketch TopProfile = new GeometrySketch(bl.TopSketch);
GeometrySketch BottomProfile = new GeometrySketch(bl.BottomSketch);
List_Profiles = new List <GeometrySketch> {
TopProfile, BottomProfile
};
}
else if (form is Revolution)
{
FormType = FormTypeEnum.Revolution;
Revolution rev = form as Revolution;
Sketch revProfile = rev.Sketch;
GeometrySketch gs = new GeometrySketch(revProfile);
GeometrySketch axis = new GeometrySketch(rev.Axis.Id.IntegerValue, -1, null);
List_Profiles = new List <GeometrySketch> {
gs, axis
};
}
else if (form is Sweep)
{
FormType = FormTypeEnum.Sweep;
Sweep sw = form as Sweep;
List_Profiles = new List <GeometrySketch>();
if (sw.Path3d != null)
{
GeometrySketch gs = new GeometrySketch(sw.Path3d);
List_Profiles.Add(gs);
}
else if (sw.PathSketch != null)
{
GeometrySketch gs = new GeometrySketch(sw.PathSketch);
List_Profiles.Add(gs);
}
if (sw.ProfileSymbol != null)
{
GeometrySketch gs = new GeometrySketch(sw.ProfileSymbol.Profile.Id.IntegerValue, -1, null);
}
else if (sw.ProfileSketch != null)
{
GeometrySketch gs = new GeometrySketch(sw.ProfileSketch);
List_Profiles.Add(gs);
}
}
else if (form is SweptBlend)
{
FormType = FormTypeEnum.SweptBlend;
SweptBlend sb = form as SweptBlend;
List_Profiles = new List <GeometrySketch>();
if (sb.SelectedPath != null)
{
Curve path = sb.SelectedPath;
GeometrySketch gs = new GeometrySketch(path.Reference.ElementId.IntegerValue, -1, null);
List_Profiles.Add(gs);
}
else if (sb.PathSketch != null)
{
GeometrySketch gs = new GeometrySketch(sb.PathSketch);
List_Profiles.Add(gs);
}
GeometrySketch gs1 = new GeometrySketch(sb.TopProfile);
GeometrySketch gs2 = new GeometrySketch(sb.BottomProfile);
List_Profiles.Add(gs1);
List_Profiles.Add(gs2);
}
}
