// ===============================================================================================
// method to display output to grasshopper with some optimization in conversion
// ===============================================================================================
public void DisplayToGrasshopper()
{
if (Containment[0].Label == 's')
{
_container = (SurfaceContainment)Containment[0];
var nu = NumberOperations.remap(XMin, XMax, _container.Surface.Domain(0).T0,
_container.Surface.Domain(0).T1, Position.X);
var nv = NumberOperations.remap(YMin, YMax, _container.Surface.Domain(1).T0,
_container.Surface.Domain(1).T1, Position.Y);
var vu = NumberOperations.remap(XMin, XMax, _container.Surface.Domain(0).T0,
_container.Surface.Domain(0).T1, Velocity.X);
var vv = NumberOperations.remap(YMin, YMax, _container.Surface.Domain(1).T0,
_container.Surface.Domain(1).T1, Velocity.Y);
GHPosition = new GH_Point(_container.Surface.PointAt(nu, nv));
GHVelocity = new GH_Vector(new Vector3d(_container.Surface.PointAt(vu, vv)));
}
else
{
GHPosition = new GH_Point(Position);
GHVelocity = new GH_Vector(Velocity);
}
}
// ===============================================================================================
// method to add behaviours to agents
// ===============================================================================================
public void ComputeDesiredVelocity(List <IFlockAgent> neighbours)
{
// First, reset the desired velocity to 0
_desiredVelocity = new Vector3d(0.0, 0.0, 0.0);
// Pull the agent back if it gets out of the bounding box
foreach (var icontainment in Containment)
{
_desiredVelocity += icontainment.DesiredVector(Position, _desiredVelocity);
}
// If there are no neighbours nearby, the agent will maintain its veloctiy,
// else it will perform the "alignment", "cohension" and "separation" behaviours
if (neighbours.Count == 0)
{
_desiredVelocity += Velocity; // maintain the current velocity
}
else
{
// -------------------------------------------------------------------------------
// "Alignment" behavior
// -------------------------------------------------------------------------------
_desiredVelocity += AgentBehaviours.Alignment(neighbours, _desiredVelocity, FlockSystem);
// -------------------------------------------------------------------------------
// "Cohesion" behavior
// -------------------------------------------------------------------------------
_desiredVelocity += AgentBehaviours.Cohesion(neighbours, Position, _desiredVelocity, FlockSystem);
// -------------------------------------------------------------------------------
// "Separation" behavior
// -------------------------------------------------------------------------------
_desiredVelocity += AgentBehaviours.Separation(neighbours, Position, _desiredVelocity, FlockSystem);
}
// -------------------------------------------------------------------------------
//// Interactionbehaviours
// -------------------------------------------------------------------------------
foreach (var interaction in Interactions)
{
switch (interaction.BehaviourType)
{
//=======================================================================================
//if interaction is repeller
case BehaviourType.Repeller:
if (Containment[0].Label == 's')
{
_container = (SurfaceContainment)Containment[0];
foreach (var repeller in interaction.Circles)
{
// Remap repellers
double u;
double v;
_container.Surface.ClosestPoint(repeller.Center, out u, out v);
var nu = NumberOperations.remap(SrfBoudningBox.Min.X,
SrfBoudningBox.Max.X, XMin, XMax, u);
var nv = NumberOperations.remap(SrfBoudningBox.Min.Y,
SrfBoudningBox.Max.Y, YMin, YMax, v);
Point3d remappedCenter = new Point3d(nu, nv, 0);
Circle remappedCircle = new Circle(remappedCenter, repeller.Radius);
_surfaceRepller.Add(remappedCircle);
}
FlockSystem.Repellers = _surfaceRepller;
}
else
{
FlockSystem.Repellers = interaction.Circles;
}
break;
//=======================================================================================
//if interaction is Attractor
case BehaviourType.Attractor:
if (Containment[0].Label == 's')
{
_container = (SurfaceContainment)Containment[0];
foreach (var attractor in interaction.Circles)
{
// Remap Attractors
double u;
double v;
_container.Surface.ClosestPoint(attractor.Center, out u, out v);
var nu = NumberOperations.remap(SrfBoudningBox.Min.X,
SrfBoudningBox.Max.X, XMin, XMax, u);
var nv = NumberOperations.remap(SrfBoudningBox.Min.Y,
SrfBoudningBox.Max.Y, YMin, YMax, v);
Point3d remappedCenter = new Point3d(nu, nv, 0);
Circle remappedCircle = new Circle(remappedCenter, attractor.Radius);
_surfaceAttractors.Add(remappedCircle);
}
FlockSystem.Attractors = _surfaceAttractors;
}
else
{
FlockSystem.Attractors = interaction.Circles;
}
var closestPoint = PointOperations.ClosestPoints(Position, FlockSystem.Attractors.Select(p => p.Center).ToList(), 1);
interaction.ClosestPoint = closestPoint[0];
break;
//=======================================================================================
//if interaction is Attractor curve
case BehaviourType.AttractorCurve:
if (Containment[0].Label == 's')
{
//getting curve data: points and degree
_container = (SurfaceContainment)Containment[0];
var interactionAttractorCurve = (AttractorCurve)interaction;
var attractorcurve = interactionAttractorCurve.Curves[0].ToNurbsCurve();
var controlpoints = attractorcurve.Points;
var degree = attractorcurve.Degree;
foreach (var controlpoint in controlpoints)
{
double u;
double v;
_container.Surface.ClosestPoint(controlpoint.Location, out u, out v);
var nu = NumberOperations.remap(_container.Surface.Domain(0).T0,
_container.Surface.Domain(0).T1, XMin, XMax, u);
var nv = NumberOperations.remap(_container.Surface.Domain(1).T0,
_container.Surface.Domain(1).T1, YMin, YMax, v);
Point3d remappedControlPoint = new Point3d(nu, nv, 0);
_remappedPoints.Add(remappedControlPoint);
}
var remappedCurve = Curve.CreateControlPointCurve(_remappedPoints, degree);
_remappedCurves.Add(remappedCurve);
FlockSystem.AttractorCurves = _remappedCurves;
}
else
{
FlockSystem.AttractorCurves = interaction.Curves;
}
var attractorCast = (AttractorCurve)interaction;
FlockSystem.AttractorCurvesSwitch = attractorCast.AttractorCurveSwitch;
//FlockSystem.AttractorCurves[0].ClosestPoint(StartPosition, out t);
//var curveClosestPoint = FlockSystem.AttractorCurves[0].PointAt(t);
Point3d curveClosestPoint;
if (FlockSystem.AttractorCurvesSwitch)
{
List <Point3d> curveClosestPoints = new List <Point3d>();
foreach (var attractorCurve in FlockSystem.AttractorCurves)
{
double t;
attractorCurve.ClosestPoint(StartPosition, out t);
curveClosestPoints.Add(attractorCurve.PointAt(t));
}
curveClosestPoint = PointOperations.ClosestPoints(StartPosition, curveClosestPoints, 1)[0];
}
else
{
List <Point3d> curveClosestPoints = new List <Point3d>();
foreach (var attractorCurve in FlockSystem.AttractorCurves)
{
double t;
attractorCurve.ClosestPoint(Position, out t);
curveClosestPoints.Add(attractorCurve.PointAt(t));
}
curveClosestPoint = PointOperations.ClosestPoints(Position, curveClosestPoints, 1)[0];
}
interaction.ClosestPoint = curveClosestPoint;
break;
//=======================================================================================
//if interaction is Repeller curve
case BehaviourType.RepellerCurve:
if (Containment[0].Label == 's')
{
//getting curve data: points and degree
_container = (SurfaceContainment)Containment[0];
var interactionRepellerCurve = (RepellerCurve)interaction;
var attractorcurve = interactionRepellerCurve.Curves[0].ToNurbsCurve();
var controlpoints = attractorcurve.Points;
var degree = attractorcurve.Degree;
foreach (var controlpoint in controlpoints)
{
double u;
double v;
_container.Surface.ClosestPoint(controlpoint.Location, out u, out v);
var nu = NumberOperations.remap(_container.Surface.Domain(0).T0,
_container.Surface.Domain(0).T1, XMin, XMax, u);
var nv = NumberOperations.remap(_container.Surface.Domain(1).T0,
_container.Surface.Domain(1).T1, YMin, YMax, v);
Point3d remappedControlPoint = new Point3d(nu, nv, 0);
_remappedPoints.Add(remappedControlPoint);
}
var remappedCurve = Curve.CreateControlPointCurve(_remappedPoints, degree);
_remappedCurves.Add(remappedCurve);
FlockSystem.RepllerCurves = _remappedCurves;
}
else
{
FlockSystem.RepllerCurves = interaction.Curves;
}
//FlockSystem.RepllerCurves[0].ClosestPoint(Position, out t);
//var repellerCurveClosestPoint = FlockSystem.RepllerCurves[0].PointAt(t);
List <Point3d> repellerCurveClosestPoints = new List <Point3d>();
foreach (var repellerCurve in FlockSystem.RepllerCurves)
{
double t;
repellerCurve.ClosestPoint(Position, out t);
repellerCurveClosestPoints.Add(repellerCurve.PointAt(t));
}
var repellerCurveClosestPoint = PointOperations.ClosestPoints(Position, repellerCurveClosestPoints, 1)[0];
interaction.ClosestPoint = repellerCurveClosestPoint;
break;
//=======================================================================================
//if interaction is Follow Points
case BehaviourType.FollowPoints:
FlockSystem.FollowAttractors = interaction.Circles;
break;
//=======================================================================================
//if interaction is follow curve
case BehaviourType.FollowCurve:
FlockSystem.FollowCurveAttractors = interaction.Circles;
break;
//=======================================================================================
//if interaction is Wind
case BehaviourType.Wind:
FlockSystem.Wind = interaction.WindVec;
break;
}
interaction.Position = Position;
interaction.FlockSystem = FlockSystem;
interaction.DesiredVelocity = _desiredVelocity;
_desiredVelocity += interaction.ComputeDesiredVelocity();
}
}
