/// <summary>
/// Creates a subscription to process the request
/// </summary>
private Subscription CreateSubscription(HistoryRequest request, DateTime start, DateTime end)
{
// data reader expects these values in local times
start = start.ConvertFromUtc(request.ExchangeHours.TimeZone);
end = end.ConvertFromUtc(request.ExchangeHours.TimeZone);
var config = new SubscriptionDataConfig(request.DataType,
request.SecurityType,
request.Symbol,
request.Resolution,
request.Market,
request.TimeZone,
request.FillForwardResolution.HasValue,
request.IncludeExtendedMarketHours,
false,
request.IsCustomData
);
var security = new Security(request.ExchangeHours, config, 1.0m);
IEnumerator <BaseData> reader = new SubscriptionDataReader(config,
start,
end,
ResultHandlerStub.Instance,
Time.EachTradeableDay(request.ExchangeHours, start, end),
false,
includeAuxilliaryData: false
);
// optionally apply fill forward behavior
if (request.FillForwardResolution.HasValue)
{
reader = new FillForwardEnumerator(reader, security.Exchange, request.FillForwardResolution.Value.ToTimeSpan(), security.IsExtendedMarketHours, end, config.Increment);
}
// since the SubscriptionDataReader performs an any overlap condition on the trade bar's entire
// range (time->end time) we can end up passing the incorrect data (too far past, possibly future),
// so to combat this we deliberately filter the results from the data reader to fix these cases
// which only apply to non-tick data
reader = new SubscriptionFilterEnumerator(reader, security, end);
reader = new FilterEnumerator <BaseData>(reader, data =>
{
// allow all ticks
if (config.Resolution == Resolution.Tick)
{
return(true);
}
// filter out future data
if (data.EndTime > end)
{
return(false);
}
// filter out data before the start
return(data.EndTime > start);
});
return(new Subscription(security, reader, start, end, false, false));
}
/// <summary>
/// Creates an enumerator for the specified security/configuration
/// </summary>
private IEnumerator <BaseData> CreateSubscriptionEnumerator(Security security,
SubscriptionDataConfig config,
DateTime localStartTime,
DateTime localEndTime,
MapFileResolver mapFileResolver,
IEnumerable <DateTime> tradeableDates,
bool useSubscriptionDataReader,
bool aggregate)
{
IEnumerator <BaseData> enumerator;
if (useSubscriptionDataReader)
{
enumerator = new SubscriptionDataReader(config, localStartTime, localEndTime, _resultHandler, mapFileResolver,
_factorFileProvider, tradeableDates, false);
}
else
{
var sourceFactory = (BaseData)Activator.CreateInstance(config.Type);
enumerator = (from date in tradeableDates
let source = sourceFactory.GetSource(config, date, false)
let factory = SubscriptionFactory.ForSource(source, config, date, false)
let entriesForDate = factory.Read(source)
from entry in entriesForDate
select entry).GetEnumerator();
}
if (aggregate)
{
enumerator = new BaseDataCollectionAggregatorEnumerator(enumerator, config.Symbol);
}
// optionally apply fill forward logic, but never for tick data
if (config.FillDataForward && config.Resolution != Resolution.Tick)
{
enumerator = new FillForwardEnumerator(enumerator, security.Exchange, _fillForwardResolution,
security.IsExtendedMarketHours, localEndTime, config.Resolution.ToTimeSpan());
}
// optionally apply exchange/user filters
if (config.IsFilteredSubscription)
{
enumerator = SubscriptionFilterEnumerator.WrapForDataFeed(_resultHandler, enumerator, security, localEndTime);
}
return(enumerator);
}
/// <summary>
/// Creates a subscription to process the request
/// </summary>
private Subscription CreateSubscription(HistoryRequest request, DateTime startUtc, DateTime endUtc)
{
// data reader expects these values in local times
var startTimeLocal = startUtc.ConvertFromUtc(request.ExchangeHours.TimeZone);
var endTimeLocal = endUtc.ConvertFromUtc(request.ExchangeHours.TimeZone);
var config = new SubscriptionDataConfig(request.DataType,
request.Symbol,
request.Resolution,
request.DataTimeZone,
request.ExchangeHours.TimeZone,
request.FillForwardResolution.HasValue,
request.IncludeExtendedMarketHours,
false,
request.IsCustomData,
request.TickType,
true,
request.DataNormalizationMode
);
_dataPermissionManager.AssertConfiguration(config);
var security = new Security(
request.ExchangeHours,
config,
new Cash(Currencies.NullCurrency, 0, 1m),
SymbolProperties.GetDefault(Currencies.NullCurrency),
ErrorCurrencyConverter.Instance,
RegisteredSecurityDataTypesProvider.Null,
new SecurityCache()
);
var mapFileResolver = MapFileResolver.Empty;
if (config.TickerShouldBeMapped())
{
mapFileResolver = _mapFileProvider.Get(config.Market);
var mapFile = mapFileResolver.ResolveMapFile(config.Symbol.ID.Symbol, config.Symbol.ID.Date);
config.MappedSymbol = mapFile.GetMappedSymbol(startTimeLocal, config.MappedSymbol);
}
// Tradable dates are defined with the data time zone to access the right source
var tradableDates = Time.EachTradeableDayInTimeZone(request.ExchangeHours, startTimeLocal, endTimeLocal, request.DataTimeZone, request.IncludeExtendedMarketHours);
var dataReader = new SubscriptionDataReader(config,
startTimeLocal,
endTimeLocal,
mapFileResolver,
_factorFileProvider,
tradableDates,
false,
_dataCacheProvider
);
dataReader.InvalidConfigurationDetected += (sender, args) => { OnInvalidConfigurationDetected(args); };
dataReader.NumericalPrecisionLimited += (sender, args) => { OnNumericalPrecisionLimited(args); };
dataReader.StartDateLimited += (sender, args) => { OnStartDateLimited(args); };
dataReader.DownloadFailed += (sender, args) => { OnDownloadFailed(args); };
dataReader.ReaderErrorDetected += (sender, args) => { OnReaderErrorDetected(args); };
IEnumerator <BaseData> reader = dataReader;
var intraday = GetIntradayDataEnumerator(dataReader, request);
if (intraday != null)
{
// we optionally concatenate the intraday data enumerator
reader = new ConcatEnumerator(true, reader, intraday);
}
reader = CorporateEventEnumeratorFactory.CreateEnumerators(
reader,
config,
_factorFileProvider,
dataReader,
mapFileResolver,
false,
startTimeLocal);
// optionally apply fill forward behavior
if (request.FillForwardResolution.HasValue)
{
// copy forward Bid/Ask bars for QuoteBars
if (request.DataType == typeof(QuoteBar))
{
reader = new QuoteBarFillForwardEnumerator(reader);
}
var readOnlyRef = Ref.CreateReadOnly(() => request.FillForwardResolution.Value.ToTimeSpan());
reader = new FillForwardEnumerator(reader, security.Exchange, readOnlyRef, request.IncludeExtendedMarketHours, endTimeLocal, config.Increment, config.DataTimeZone, startTimeLocal);
}
// since the SubscriptionDataReader performs an any overlap condition on the trade bar's entire
// range (time->end time) we can end up passing the incorrect data (too far past, possibly future),
// so to combat this we deliberately filter the results from the data reader to fix these cases
// which only apply to non-tick data
reader = new SubscriptionFilterEnumerator(reader, security, endTimeLocal, config.ExtendedMarketHours, false);
reader = new FilterEnumerator <BaseData>(reader, data =>
{
// allow all ticks
if (config.Resolution == Resolution.Tick)
{
return(true);
}
// filter out future data
if (data.EndTime > endTimeLocal)
{
return(false);
}
// filter out data before the start
return(data.EndTime > startTimeLocal);
});
var subscriptionRequest = new SubscriptionRequest(false, null, security, config, request.StartTimeUtc, request.EndTimeUtc);
if (_parallelHistoryRequestsEnabled)
{
return(SubscriptionUtils.CreateAndScheduleWorker(subscriptionRequest, reader, _factorFileProvider, false));
}
return(SubscriptionUtils.Create(subscriptionRequest, reader));
}
/// <summary>
/// Creates a new subscription for the specified security
/// </summary>
/// <param name="request">The subscription request</param>
/// <returns>A new subscription instance of the specified security</returns>
protected Subscription CreateSubscription(SubscriptionRequest request)
{
Subscription subscription = null;
try
{
var localEndTime = request.EndTimeUtc.ConvertFromUtc(request.Security.Exchange.TimeZone);
var timeZoneOffsetProvider = new TimeZoneOffsetProvider(request.Security.Exchange.TimeZone, request.StartTimeUtc, request.EndTimeUtc);
IEnumerator<BaseData> enumerator;
if (request.Configuration.IsCustomData)
{
if (!Quandl.IsAuthCodeSet)
{
// we're not using the SubscriptionDataReader, so be sure to set the auth token here
Quandl.SetAuthCode(Config.Get("quandl-auth-token"));
}
// each time we exhaust we'll new up this enumerator stack
var refresher = new RefreshEnumerator<BaseData>(() =>
{
var dateInDataTimeZone = DateTime.UtcNow.ConvertFromUtc(request.Configuration.DataTimeZone).Date;
var enumeratorFactory = new BaseDataCollectionSubscriptionEnumeratorFactory(r => new [] {dateInDataTimeZone});
var factoryReadEnumerator = enumeratorFactory.CreateEnumerator(request);
var maximumDataAge = TimeSpan.FromTicks(Math.Max(request.Configuration.Increment.Ticks, TimeSpan.FromSeconds(5).Ticks));
return new FastForwardEnumerator(factoryReadEnumerator, _timeProvider, request.Security.Exchange.TimeZone, maximumDataAge);
});
// rate limit the refreshing of the stack to the requested interval
var minimumTimeBetweenCalls = Math.Min(request.Configuration.Increment.Ticks, TimeSpan.FromMinutes(30).Ticks);
var rateLimit = new RateLimitEnumerator(refresher, _timeProvider, TimeSpan.FromTicks(minimumTimeBetweenCalls));
var frontierAware = new FrontierAwareEnumerator(rateLimit, _timeProvider, timeZoneOffsetProvider);
_customExchange.AddEnumerator(request.Configuration.Symbol, frontierAware);
var enqueable = new EnqueueableEnumerator<BaseData>();
_customExchange.SetDataHandler(request.Configuration.Symbol, data =>
{
enqueable.Enqueue(data);
if (subscription != null) subscription.RealtimePrice = data.Value;
});
enumerator = enqueable;
}
else if (request.Configuration.Resolution != Resolution.Tick)
{
// this enumerator allows the exchange to pump ticks into the 'back' of the enumerator,
// and the time sync loop can pull aggregated trade bars off the front
var aggregator = new TradeBarBuilderEnumerator(request.Configuration.Increment, request.Security.Exchange.TimeZone, _timeProvider);
_exchange.SetDataHandler(request.Configuration.Symbol, data =>
{
aggregator.ProcessData((Tick) data);
if (subscription != null) subscription.RealtimePrice = data.Value;
});
enumerator = aggregator;
}
else
{
// tick subscriptions can pass right through
var tickEnumerator = new EnqueueableEnumerator<BaseData>();
_exchange.SetDataHandler(request.Configuration.Symbol, data =>
{
tickEnumerator.Enqueue(data);
if (subscription != null) subscription.RealtimePrice = data.Value;
});
enumerator = tickEnumerator;
}
if (request.Configuration.FillDataForward)
{
enumerator = new LiveFillForwardEnumerator(_frontierTimeProvider, enumerator, request.Security.Exchange, _fillForwardResolution, request.Configuration.ExtendedMarketHours, localEndTime, request.Configuration.Increment);
}
// define market hours and user filters to incoming data
if (request.Configuration.IsFilteredSubscription)
{
enumerator = new SubscriptionFilterEnumerator(enumerator, request.Security, localEndTime);
}
// finally, make our subscriptions aware of the frontier of the data feed, prevents future data from spewing into the feed
enumerator = new FrontierAwareEnumerator(enumerator, _frontierTimeProvider, timeZoneOffsetProvider);
subscription = new Subscription(request.Universe, request.Security, request.Configuration, enumerator, timeZoneOffsetProvider, request.StartTimeUtc, request.EndTimeUtc, false);
}
catch (Exception err)
{
Log.Error(err);
}
return subscription;
}
/// <summary>
/// Creates a subscription to process the request
/// </summary>
private Subscription CreateSubscription(HistoryRequest request, DateTime start, DateTime end)
{
// data reader expects these values in local times
start = start.ConvertFromUtc(request.ExchangeHours.TimeZone);
end = end.ConvertFromUtc(request.ExchangeHours.TimeZone);
var config = new SubscriptionDataConfig(request.DataType,
request.Symbol,
request.Resolution,
request.DataTimeZone,
request.ExchangeHours.TimeZone,
request.FillForwardResolution.HasValue,
request.IncludeExtendedMarketHours,
false,
request.IsCustomData,
request.TickType,
true,
request.DataNormalizationMode
);
var security = new Security(
request.ExchangeHours,
config,
new Cash(CashBook.AccountCurrency, 0, 1m),
SymbolProperties.GetDefault(CashBook.AccountCurrency),
ErrorCurrencyConverter.Instance
);
var dataReader = new SubscriptionDataReader(config,
start,
end,
config.SecurityType == SecurityType.Equity ? _mapFileProvider.Get(config.Market) : MapFileResolver.Empty,
_factorFileProvider,
Time.EachTradeableDay(request.ExchangeHours, start, end),
false,
_dataCacheProvider,
false
);
dataReader.InvalidConfigurationDetected += (sender, args) => { OnInvalidConfigurationDetected(new InvalidConfigurationDetectedEventArgs(args.Message)); };
dataReader.NumericalPrecisionLimited += (sender, args) => { OnNumericalPrecisionLimited(new NumericalPrecisionLimitedEventArgs(args.Message)); };
dataReader.DownloadFailed += (sender, args) => { OnDownloadFailed(new DownloadFailedEventArgs(args.Message, args.StackTrace)); };
dataReader.ReaderErrorDetected += (sender, args) => { OnReaderErrorDetected(new ReaderErrorDetectedEventArgs(args.Message, args.StackTrace)); };
dataReader.Initialize();
IEnumerator <BaseData> reader = dataReader;
// optionally apply fill forward behavior
if (request.FillForwardResolution.HasValue)
{
// copy forward Bid/Ask bars for QuoteBars
if (request.DataType == typeof(QuoteBar))
{
reader = new QuoteBarFillForwardEnumerator(reader);
}
var readOnlyRef = Ref.CreateReadOnly(() => request.FillForwardResolution.Value.ToTimeSpan());
reader = new FillForwardEnumerator(reader, security.Exchange, readOnlyRef, security.IsExtendedMarketHours, end, config.Increment, config.DataTimeZone);
}
// since the SubscriptionDataReader performs an any overlap condition on the trade bar's entire
// range (time->end time) we can end up passing the incorrect data (too far past, possibly future),
// so to combat this we deliberately filter the results from the data reader to fix these cases
// which only apply to non-tick data
reader = new SubscriptionFilterEnumerator(reader, security, end);
reader = new FilterEnumerator <BaseData>(reader, data =>
{
// allow all ticks
if (config.Resolution == Resolution.Tick)
{
return(true);
}
// filter out future data
if (data.EndTime > end)
{
return(false);
}
// filter out data before the start
return(data.EndTime > start);
});
var timeZoneOffsetProvider = new TimeZoneOffsetProvider(security.Exchange.TimeZone, start, end);
var subscriptionDataEnumerator = SubscriptionData.Enumerator(config, security, timeZoneOffsetProvider, reader);
var subscriptionRequest = new SubscriptionRequest(false, null, security, config, start, end);
return(new Subscription(subscriptionRequest, subscriptionDataEnumerator, timeZoneOffsetProvider));
}
/// <summary>
/// Creates a new subscription for the specified security
/// </summary>
/// <param name="universe"></param>
/// <param name="security">The security to create a subscription for</param>
/// <param name="config">The subscription config to be added</param>
/// <param name="utcStartTime">The start time of the subscription in UTC</param>
/// <param name="utcEndTime">The end time of the subscription in UTC</param>
/// <returns>A new subscription instance of the specified security</returns>
protected Subscription CreateSubscription(Universe universe, Security security, SubscriptionDataConfig config, DateTime utcStartTime, DateTime utcEndTime)
{
Subscription subscription = null;
try
{
var localEndTime = utcEndTime.ConvertFromUtc(security.Exchange.TimeZone);
var timeZoneOffsetProvider = new TimeZoneOffsetProvider(security.Exchange.TimeZone, utcStartTime, utcEndTime);
IEnumerator <BaseData> enumerator;
if (config.IsCustomData)
{
if (!Quandl.IsAuthCodeSet)
{
// we're not using the SubscriptionDataReader, so be sure to set the auth token here
Quandl.SetAuthCode(Config.Get("quandl-auth-token"));
}
// each time we exhaust we'll new up this enumerator stack
var refresher = new RefreshEnumerator <BaseData>(() =>
{
var sourceProvider = (BaseData)Activator.CreateInstance(config.Type);
var dateInDataTimeZone = DateTime.UtcNow.ConvertFromUtc(config.DataTimeZone).Date;
var source = sourceProvider.GetSource(config, dateInDataTimeZone, true);
var factory = SubscriptionFactory.ForSource(source, config, dateInDataTimeZone, false);
var factoryReadEnumerator = factory.Read(source).GetEnumerator();
var maximumDataAge = TimeSpan.FromTicks(Math.Max(config.Increment.Ticks, TimeSpan.FromSeconds(5).Ticks));
var fastForward = new FastForwardEnumerator(factoryReadEnumerator, _timeProvider, security.Exchange.TimeZone, maximumDataAge);
return(new FrontierAwareEnumerator(fastForward, _timeProvider, timeZoneOffsetProvider));
});
// rate limit the refreshing of the stack to the requested interval
var minimumTimeBetweenCalls = Math.Min(config.Increment.Ticks, TimeSpan.FromMinutes(30).Ticks);
var rateLimit = new RateLimitEnumerator(refresher, _timeProvider, TimeSpan.FromTicks(minimumTimeBetweenCalls));
_customExchange.AddEnumerator(config.Symbol, rateLimit);
var enqueable = new EnqueueableEnumerator <BaseData>();
_customExchange.SetDataHandler(config.Symbol, data =>
{
enqueable.Enqueue(data);
if (subscription != null)
{
subscription.RealtimePrice = data.Value;
}
});
enumerator = enqueable;
}
else if (config.Resolution != Resolution.Tick)
{
// this enumerator allows the exchange to pump ticks into the 'back' of the enumerator,
// and the time sync loop can pull aggregated trade bars off the front
var aggregator = new TradeBarBuilderEnumerator(config.Increment, security.Exchange.TimeZone, _timeProvider);
_exchange.SetDataHandler(config.Symbol, data =>
{
aggregator.ProcessData((Tick)data);
if (subscription != null)
{
subscription.RealtimePrice = data.Value;
}
});
enumerator = aggregator;
}
else
{
// tick subscriptions can pass right through
var tickEnumerator = new EnqueueableEnumerator <BaseData>();
_exchange.SetDataHandler(config.Symbol, data =>
{
tickEnumerator.Enqueue(data);
if (subscription != null)
{
subscription.RealtimePrice = data.Value;
}
});
enumerator = tickEnumerator;
}
if (config.FillDataForward)
{
enumerator = new LiveFillForwardEnumerator(_frontierTimeProvider, enumerator, security.Exchange, _fillForwardResolution, config.ExtendedMarketHours, localEndTime, config.Increment);
}
// define market hours and user filters to incoming data
if (config.IsFilteredSubscription)
{
enumerator = new SubscriptionFilterEnumerator(enumerator, security, localEndTime);
}
// finally, make our subscriptions aware of the frontier of the data feed, prevents future data from spewing into the feed
enumerator = new FrontierAwareEnumerator(enumerator, _frontierTimeProvider, timeZoneOffsetProvider);
subscription = new Subscription(universe, security, config, enumerator, timeZoneOffsetProvider, utcStartTime, utcEndTime, false);
}
catch (Exception err)
{
Log.Error(err);
}
return(subscription);
}
/// <summary>
/// Creates a new subscription for the specified security
/// </summary>
/// <param name="security">The security to create a subscription for</param>
/// <param name="utcStartTime">The start time of the subscription in UTC</param>
/// <param name="utcEndTime">The end time of the subscription in UTC</param>
/// <param name="isUserDefinedSubscription">True for subscriptions manually added by user via AddSecurity</param>
/// <returns>A new subscription instance of the specified security</returns>
protected Subscription CreateSubscription(Security security, DateTime utcStartTime, DateTime utcEndTime, bool isUserDefinedSubscription)
{
Subscription subscription = null;
try
{
var config = security.SubscriptionDataConfig;
var localStartTime = utcStartTime.ConvertFromUtc(config.TimeZone);
var localEndTime = utcEndTime.ConvertFromUtc(config.TimeZone);
IEnumerator<BaseData> enumerator;
if (config.IsCustomData)
{
// custom data uses backtest readers
var tradeableDates = Time.EachTradeableDay(security, localStartTime, localEndTime);
var reader = new SubscriptionDataReader(config, localStartTime, localEndTime, _resultHandler, tradeableDates, true, false);
// apply fast forwarding, this is especially important for RemoteFile types that
// can send in large chunks of old, irrelevant data
var fastForward = new FastForwardEnumerator(reader, _timeProvider, config.TimeZone, config.Increment);
// apply rate limits (1x per increment, max 30 minutes between calls)
// TODO : Pull limits from config file?
var minimumTimeBetweenCalls = Math.Min(config.Increment.Ticks, TimeSpan.FromMinutes(30).Ticks);
var rateLimit = new RateLimitEnumerator(fastForward, _timeProvider, TimeSpan.FromTicks(minimumTimeBetweenCalls));
// add the enumerator to the exchange
_customExchange.AddEnumerator(rateLimit);
// this enumerator just allows the exchange to directly dump data into the 'back' of the enumerator
var enqueable = new EnqueableEnumerator<BaseData>();
_customExchange.SetHandler(config.Symbol, data =>
{
enqueable.Enqueue(data);
if (subscription != null) subscription.RealtimePrice = data.Value;
});
enumerator = enqueable;
}
else if (config.Resolution != Resolution.Tick)
{
// this enumerator allows the exchange to pump ticks into the 'back' of the enumerator,
// and the time sync loop can pull aggregated trade bars off the front
var aggregator = new TradeBarBuilderEnumerator(config.Increment, config.TimeZone, _timeProvider);
_exchange.SetHandler(config.Symbol, data =>
{
aggregator.ProcessData((Tick) data);
if (subscription != null) subscription.RealtimePrice = data.Value;
});
enumerator = aggregator;
}
else
{
// tick subscriptions can pass right through
var tickEnumerator = new EnqueableEnumerator<BaseData>();
_exchange.SetHandler(config.Symbol, data =>
{
tickEnumerator.Enqueue(data);
if (subscription != null) subscription.RealtimePrice = data.Value;
});
enumerator = tickEnumerator;
}
if (config.FillDataForward)
{
// TODO : Properly resolve fill forward resolution like in FileSystemDataFeed (make considerations for universe-only)
enumerator = new LiveFillForwardEnumerator(_frontierTimeProvider, enumerator, security.Exchange, _fillForwardResolution.ToTimeSpan(), config.ExtendedMarketHours, localEndTime, config.Increment);
}
// define market hours and user filters to incoming data
enumerator = new SubscriptionFilterEnumerator(enumerator, security, localEndTime);
// finally, make our subscriptions aware of the frontier of the data feed, this will help
var timeZoneOffsetProvider = new TimeZoneOffsetProvider(security.SubscriptionDataConfig.TimeZone, utcStartTime, utcEndTime);
enumerator = new FrontierAwareEnumerator(enumerator, _frontierTimeProvider, timeZoneOffsetProvider);
subscription = new Subscription(security, enumerator, timeZoneOffsetProvider, utcStartTime, utcEndTime, isUserDefinedSubscription);
}
catch (Exception err)
{
Log.Error(err);
}
return subscription;
}
/// <summary>
/// Creates a subscription to process the request
/// </summary>
private Subscription CreateSubscription(HistoryRequest request)
{
var config = request.ToSubscriptionDataConfig();
DataPermissionManager.AssertConfiguration(config, request.StartTimeLocal, request.EndTimeLocal);
var security = new Security(
request.ExchangeHours,
config,
new Cash(Currencies.NullCurrency, 0, 1m),
SymbolProperties.GetDefault(Currencies.NullCurrency),
ErrorCurrencyConverter.Instance,
RegisteredSecurityDataTypesProvider.Null,
new SecurityCache()
);
var dataReader = new SubscriptionDataReader(config,
request,
_mapFileProvider,
_factorFileProvider,
_dataCacheProvider,
_dataProvider
);
dataReader.InvalidConfigurationDetected += (sender, args) => { OnInvalidConfigurationDetected(args); };
dataReader.NumericalPrecisionLimited += (sender, args) => { OnNumericalPrecisionLimited(args); };
dataReader.StartDateLimited += (sender, args) => { OnStartDateLimited(args); };
dataReader.DownloadFailed += (sender, args) => { OnDownloadFailed(args); };
dataReader.ReaderErrorDetected += (sender, args) => { OnReaderErrorDetected(args); };
IEnumerator <BaseData> reader = dataReader;
var intraday = GetIntradayDataEnumerator(dataReader, request);
if (intraday != null)
{
// we optionally concatenate the intraday data enumerator
reader = new ConcatEnumerator(true, reader, intraday);
}
reader = CorporateEventEnumeratorFactory.CreateEnumerators(
reader,
config,
_factorFileProvider,
dataReader,
_mapFileProvider,
request.StartTimeLocal);
// optionally apply fill forward behavior
if (request.FillForwardResolution.HasValue)
{
// copy forward Bid/Ask bars for QuoteBars
if (request.DataType == typeof(QuoteBar))
{
reader = new QuoteBarFillForwardEnumerator(reader);
}
var readOnlyRef = Ref.CreateReadOnly(() => request.FillForwardResolution.Value.ToTimeSpan());
reader = new FillForwardEnumerator(reader, security.Exchange, readOnlyRef, request.IncludeExtendedMarketHours, request.EndTimeLocal, config.Increment, config.DataTimeZone);
}
// since the SubscriptionDataReader performs an any overlap condition on the trade bar's entire
// range (time->end time) we can end up passing the incorrect data (too far past, possibly future),
// so to combat this we deliberately filter the results from the data reader to fix these cases
// which only apply to non-tick data
reader = new SubscriptionFilterEnumerator(reader, security, request.EndTimeLocal, config.ExtendedMarketHours, false, request.ExchangeHours);
reader = new FilterEnumerator <BaseData>(reader, data =>
{
// allow all ticks
if (config.Resolution == Resolution.Tick)
{
return(true);
}
// filter out all aux data
if (data.DataType == MarketDataType.Auxiliary)
{
return(false);
}
// filter out future data
if (data.EndTime > request.EndTimeLocal)
{
return(false);
}
// filter out data before the start
return(data.EndTime > request.StartTimeLocal);
});
var subscriptionRequest = new SubscriptionRequest(false, null, security, config, request.StartTimeUtc, request.EndTimeUtc);
if (_parallelHistoryRequestsEnabled)
{
return(SubscriptionUtils.CreateAndScheduleWorker(subscriptionRequest, reader, _factorFileProvider, false));
}
return(SubscriptionUtils.Create(subscriptionRequest, reader));
}
/// <summary>
/// Creates a new subscription for the specified security
/// </summary>
/// <param name="universe"></param>
/// <param name="security">The security to create a subscription for</param>
/// <param name="utcStartTime">The start time of the subscription in UTC</param>
/// <param name="utcEndTime">The end time of the subscription in UTC</param>
/// <returns>A new subscription instance of the specified security</returns>
protected Subscription CreateSubscription(Universe universe, Security security, DateTime utcStartTime, DateTime utcEndTime)
{
Subscription subscription = null;
try
{
var config = security.SubscriptionDataConfig;
var localEndTime = utcEndTime.ConvertFromUtc(security.Exchange.TimeZone);
var timeZoneOffsetProvider = new TimeZoneOffsetProvider(security.Exchange.TimeZone, utcStartTime, utcEndTime);
IEnumerator<BaseData> enumerator;
if (config.IsCustomData)
{
// each time we exhaust we'll new up this enumerator stack
var refresher = new RefreshEnumerator<BaseData>(() =>
{
var sourceProvider = (BaseData)Activator.CreateInstance(config.Type);
var currentLocalDate = DateTime.UtcNow.ConvertFromUtc(security.Exchange.TimeZone).Date;
var factory = new BaseDataSubscriptionFactory(config, currentLocalDate, true);
var source = sourceProvider.GetSource(config, currentLocalDate, true);
var factoryReadEnumerator = factory.Read(source).GetEnumerator();
var maximumDataAge = TimeSpan.FromTicks(Math.Max(config.Increment.Ticks, TimeSpan.FromSeconds(5).Ticks));
var fastForward = new FastForwardEnumerator(factoryReadEnumerator, _timeProvider, security.Exchange.TimeZone, maximumDataAge);
return new FrontierAwareEnumerator(fastForward, _timeProvider, timeZoneOffsetProvider);
});
// rate limit the refreshing of the stack to the requested interval
var minimumTimeBetweenCalls = Math.Min(config.Increment.Ticks, TimeSpan.FromMinutes(30).Ticks);
var rateLimit = new RateLimitEnumerator(refresher, _timeProvider, TimeSpan.FromTicks(minimumTimeBetweenCalls));
_customExchange.AddEnumerator(rateLimit);
var enqueable = new EnqueableEnumerator<BaseData>();
_customExchange.SetHandler(config.Symbol, data =>
{
enqueable.Enqueue(data);
if (subscription != null) subscription.RealtimePrice = data.Value;
});
enumerator = enqueable;
}
else if (config.Resolution != Resolution.Tick)
{
// this enumerator allows the exchange to pump ticks into the 'back' of the enumerator,
// and the time sync loop can pull aggregated trade bars off the front
var aggregator = new TradeBarBuilderEnumerator(config.Increment, security.Exchange.TimeZone, _timeProvider);
_exchange.SetHandler(config.Symbol, data =>
{
aggregator.ProcessData((Tick) data);
if (subscription != null) subscription.RealtimePrice = data.Value;
});
enumerator = aggregator;
}
else
{
// tick subscriptions can pass right through
var tickEnumerator = new EnqueableEnumerator<BaseData>();
_exchange.SetHandler(config.Symbol, data =>
{
tickEnumerator.Enqueue(data);
if (subscription != null) subscription.RealtimePrice = data.Value;
});
enumerator = tickEnumerator;
}
if (config.FillDataForward)
{
// TODO : Properly resolve fill forward resolution like in FileSystemDataFeed (make considerations for universe-only)
enumerator = new LiveFillForwardEnumerator(_frontierTimeProvider, enumerator, security.Exchange, _fillForwardResolution, config.ExtendedMarketHours, localEndTime, config.Increment);
}
// define market hours and user filters to incoming data
enumerator = new SubscriptionFilterEnumerator(enumerator, security, localEndTime);
// finally, make our subscriptions aware of the frontier of the data feed, this will help
enumerator = new FrontierAwareEnumerator(enumerator, _frontierTimeProvider, timeZoneOffsetProvider);
subscription = new Subscription(universe, security, enumerator, timeZoneOffsetProvider, utcStartTime, utcEndTime, false);
}
catch (Exception err)
{
Log.Error(err);
}
return subscription;
}
/// <summary>
/// Creates a subscription to process the request
/// </summary>
private Subscription CreateSubscription(HistoryRequest request, DateTime start, DateTime end)
{
// data reader expects these values in local times
start = start.ConvertFromUtc(request.ExchangeHours.TimeZone);
end = end.ConvertFromUtc(request.ExchangeHours.TimeZone);
var config = new SubscriptionDataConfig(request.DataType,
request.Symbol,
request.Resolution,
request.TimeZone,
request.ExchangeHours.TimeZone,
request.FillForwardResolution.HasValue,
request.IncludeExtendedMarketHours,
false,
request.IsCustomData,
null,
true,
request.DataNormalizationMode
);
var security = new Security(request.ExchangeHours, config, new Cash(CashBook.AccountCurrency, 0, 1m), SymbolProperties.GetDefault(CashBook.AccountCurrency));
IEnumerator <BaseData> reader = new SubscriptionDataReader(config,
start,
end,
ResultHandlerStub.Instance,
config.SecurityType == SecurityType.Equity ? _mapFileProvider.Get(config.Market) : MapFileResolver.Empty,
_factorFileProvider,
_dataProvider,
Time.EachTradeableDay(request.ExchangeHours, start, end),
false,
_dataCacheProvider,
false
);
// optionally apply fill forward behavior
if (request.FillForwardResolution.HasValue)
{
var readOnlyRef = Ref.CreateReadOnly(() => request.FillForwardResolution.Value.ToTimeSpan());
reader = new FillForwardEnumerator(reader, security.Exchange, readOnlyRef, security.IsExtendedMarketHours, end, config.Increment);
}
// since the SubscriptionDataReader performs an any overlap condition on the trade bar's entire
// range (time->end time) we can end up passing the incorrect data (too far past, possibly future),
// so to combat this we deliberately filter the results from the data reader to fix these cases
// which only apply to non-tick data
reader = new SubscriptionFilterEnumerator(reader, security, end);
reader = new FilterEnumerator <BaseData>(reader, data =>
{
// allow all ticks
if (config.Resolution == Resolution.Tick)
{
return(true);
}
// filter out future data
if (data.EndTime > end)
{
return(false);
}
// filter out data before the start
return(data.EndTime > start);
});
var timeZoneOffsetProvider = new TimeZoneOffsetProvider(security.Exchange.TimeZone, start, end);
return(new Subscription(null, security, config, reader, timeZoneOffsetProvider, start, end, false));
}
