public void Init()
{
Utils.Logger.Info("****WebsitesMonitor:Init()");
var sqTask = new SqTask()
{
Name = "WebsitesMonitor",
ExecutionFactory = WebsitesMonitorExecution.ExecutionFactoryCreate,
};
sqTask.Triggers.Add(new SqTrigger()
{
Name = "SpIndexChanges",
SqTask = sqTask,
TriggerType = TriggerType.DailyOnUsaMarketDay,
// Market close is sometimes 16:00, sometimes 13:00. Better to be relative to market open.
// 5min after release time 17:15 ET, which is 1h15min after market close. Market open: 9:30 ET.
Start = new RelativeTime()
{
Base = RelativeTimeBase.BaseOnUsaMarketOpen, TimeOffset = TimeSpan.FromMinutes((17 - 9.5) * 60 + 20)
},
TriggerSettings = new Dictionary <object, object>()
{
{ TaskSetting.ActionType, WsMonTaskSettingAction.SpIndexChanges }
}
});
SqTaskScheduler.gSqTasks.Add(sqTask);
}
public void Init()
{
Utils.Logger.Info("****Overmind:Init()");
var sqTask = new SqTask()
{
Name = "Overmind",
ExecutionFactory = OvermindExecution.ExecutionFactoryCreate,
};
sqTask.Triggers.Add(new SqTrigger()
{
Name = "MorningCheck",
SqTask = sqTask,
TriggerType = TriggerType.Daily,
Start = new RelativeTime()
{
Base = RelativeTimeBase.BaseOnAbsoluteTimeMidnightUtc, TimeOffset = TimeSpan.FromMinutes(9 * 60 + 5)
}, // Activate every day 9:05 UTC,
TriggerSettings = new Dictionary <object, object>()
{
{ TaskSetting.ActionType, OvermindTaskSettingAction.MorningCheck }
}
});
sqTask.Triggers.Add(new SqTrigger()
{
Name = "MiddayCheck",
SqTask = sqTask,
TriggerType = TriggerType.Daily,
Start = new RelativeTime()
{
Base = RelativeTimeBase.BaseOnAbsoluteTimeMidnightUtc, TimeOffset = TimeSpan.FromMinutes(16 * 60 + 45)
}, // Activate every day 16:45 UTC
TriggerSettings = new Dictionary <object, object>()
{
{ TaskSetting.ActionType, OvermindTaskSettingAction.MiddayCheck }
}
});
SqTaskScheduler.gSqTasks.Add(sqTask);
}
// Another feauture that was not implemented. Maybe not needed ever:
//Periodically check that VirtualBroker is alive and ready(every 60 minutes, if no answer for second time, make phonecall). Skip this one. Reasons:
//- not easy to implement.VBroker should be happy to get incoming Tcp messages
//- that is unusual, and it means I have to play with security, allowing another IP to access the VBroker server. But when IPs change, that is a lot of hassle
//- currently, there are 2 extra simulations intraday. If VbServer is down, the simulation that is 30min before marketClose would be spotted by HealthMon.
//- this feature can be mimicked: buy doing UberVXX task Simulation every hour.In that case VBrokerMonitorScheduler will notice that OK message didn't come in the last hour.
//- Sum: this feauture is not necessary, and takes time to implement.Don't do it now.
private void AddVbTasksToScheduler()
{
try
{
var uberVxxTask = new SqTask()
{
Name = "UberVXX",
NameForTextToSpeech = "Uber V X X ",
ExecutionFactory = HmVbTradeStrategyExecution.ExecutionFactoryCreate,
};
uberVxxTask.Triggers.Add(new SqTrigger()
{
Name = "MarketOpen+25min",
SqTask = uberVxxTask,
TriggerType = TriggerType.DailyOnUsaMarketDay,
Start = new RelativeTime()
{
Base = RelativeTimeBase.BaseOnUsaMarketOpen, TimeOffset = TimeSpan.FromMinutes(25)
}
});
uberVxxTask.Triggers.Add(new SqTrigger()
{
Name = "MarketClose-35min",
SqTask = uberVxxTask,
TriggerType = TriggerType.DailyOnUsaMarketDay,
Start = new RelativeTime()
{
Base = RelativeTimeBase.BaseOnUsaMarketClose, TimeOffset = TimeSpan.FromMinutes(-35)
}
});
uberVxxTask.Triggers.Add(new SqTrigger()
{
Name = "MarketClose-15sec",
SqTask = uberVxxTask,
TriggerType = TriggerType.DailyOnUsaMarketDay,
Start = new RelativeTime()
{
Base = RelativeTimeBase.BaseOnUsaMarketClose, TimeOffset = TimeSpan.FromMinutes(-15)
} // from -20sec to -15sec. From start, the trade executes in 2seconds
});
SqTaskScheduler.gSqTasks.Add(uberVxxTask);
var harryLongTask = new SqTask()
{
Name = "HarryLong",
NameForTextToSpeech = "Harry Long ",
ExecutionFactory = HmVbTradeStrategyExecution.ExecutionFactoryCreate,
};
harryLongTask.Triggers.Add(new SqTrigger()
{
Name = "MarketOpen+30min",
SqTask = harryLongTask,
TriggerType = TriggerType.DailyOnUsaMarketDay,
Start = new RelativeTime()
{
Base = RelativeTimeBase.BaseOnUsaMarketOpen, TimeOffset = TimeSpan.FromMinutes(30)
}
});
harryLongTask.Triggers.Add(new SqTrigger()
{
Name = "MarketClose-31min",
SqTask = harryLongTask,
TriggerType = TriggerType.DailyOnUsaMarketDay,
Start = new RelativeTime()
{
Base = RelativeTimeBase.BaseOnUsaMarketClose, TimeOffset = TimeSpan.FromMinutes(-31)
}
});
harryLongTask.Triggers.Add(new SqTrigger()
{
Name = "MarketClose-11sec",
SqTask = harryLongTask,
TriggerType = TriggerType.DailyOnUsaMarketDay,
Start = new RelativeTime()
{
Base = RelativeTimeBase.BaseOnUsaMarketClose, TimeOffset = TimeSpan.FromMinutes(-11)
} // Give UberVXX priority (executing at -15sec). That is more important because that can change from full 100% long to -200% short. This Harry Long strategy just slowly modifies weights, so if one trade is missed, it is not a problem.
});
SqTaskScheduler.gSqTasks.Add(harryLongTask);
}
catch (Exception e)
{
Utils.Logger.Error(e, "AddVbTasksToScheduler");
//HealthMonitorMessage.SendException("BrokerScheduler.RecreateTasksAndLoop Thread", e, HealthMonitorMessageID.ReportErrorFromVirtualBroker);
}
}
public void Init()
{
Utils.Logger.Info("****BrAccChecker:Init()");
var sqTask = new SqTask()
{
Name = "BrAccChecker",
ExecutionFactory = BrAccCheckerExecution.ExecutionFactoryCreate,
};
// trigger times: it is worth doing: 5 minutes after Open, 5 minutes after close, because that is when trades happen.
// also schedule at every whole hours: 10:00, 11:00, ... but if it is OTH, only execute portfolio position updates if lastDate is more than 5h old.
// user can also initiate forced update, but this is the automatic ones.
sqTask.Triggers.Add(new SqTrigger()
{
Name = "AtApplicationStartupCheck",
SqTask = sqTask,
TriggerType = TriggerType.AtApplicationStartup,
Start = new RelativeTime()
{
Base = RelativeTimeBase.Unknown, TimeOffset = TimeSpan.FromSeconds(10)
}, // a bit later then App startup, to give time to Gateways to connect
TriggerSettings = new Dictionary <object, object>()
{
{ TaskSetting.ActionType, BrAccCheckerTaskSettingAction.AtApplicationStartupCheck }
}
});
sqTask.Triggers.Add(new SqTrigger()
{
Name = "OpenCheck",
SqTask = sqTask,
TriggerType = TriggerType.DailyOnUsaMarketDay,
Start = new RelativeTime()
{
Base = RelativeTimeBase.BaseOnUsaMarketOpen, TimeOffset = TimeSpan.FromMinutes(5)
},
TriggerSettings = new Dictionary <object, object>()
{
{ TaskSetting.ActionType, BrAccCheckerTaskSettingAction.OpenCheck }
}
});
sqTask.Triggers.Add(new SqTrigger()
{
Name = "CloseCheck",
SqTask = sqTask,
TriggerType = TriggerType.DailyOnUsaMarketDay,
Start = new RelativeTime()
{
Base = RelativeTimeBase.BaseOnUsaMarketClose, TimeOffset = TimeSpan.FromMinutes(5)
},
TriggerSettings = new Dictionary <object, object>()
{
{ TaskSetting.ActionType, BrAccCheckerTaskSettingAction.CloseCheck }
}
});
// at every whole hours: 10:10, 11:10, ... but not in OTH, when positions will not change
sqTask.Triggers.Add(new SqTrigger()
{
Name = "PeriodicCheck",
SqTask = sqTask,
TriggerType = TriggerType.Periodic,
Start = new RelativeTime()
{
Base = RelativeTimeBase.BaseOnAbsoluteTimeAtEveryHourUtc, TimeOffset = TimeSpan.FromMinutes(10)
},
TriggerSettings = new Dictionary <object, object>()
{
{ TaskSetting.ActionType, BrAccCheckerTaskSettingAction.PeriodicCheck }
}
});
SqTaskScheduler.gSqTasks.Add(sqTask);
}