private static ISpatialReference CreateDefaultSpatialReference()
{
var spatialReference =
(ISpatialReference3)
SpatialReferenceUtils.CreateSpatialReference(
WellKnownHorizontalCS.LV95, WellKnownVerticalCS.LHN95);
var controlPrecision = (IControlPrecision2)spatialReference;
//Determines whether you are constructing a high or low.
controlPrecision.IsHighPrecision = true;
var spatialReferenceResolution =
(ISpatialReferenceResolution)spatialReference;
//These three methods are the keys, construct horizon, then set the default x,y resolution and tolerance.
spatialReferenceResolution.ConstructFromHorizon();
//Set the default x,y resolution value.
spatialReferenceResolution.SetDefaultXYResolution();
spatialReferenceResolution.set_XYResolution(true, 0.00001);
spatialReferenceResolution.set_ZResolution(true, 0.00001);
//Set the default x,y tolerance value.
var spatialReferenceTolerance = (ISpatialReferenceTolerance)spatialReference;
spatialReferenceTolerance.XYTolerance = 0.0001;
spatialReferenceTolerance.ZTolerance = 0.0001;
return(spatialReference);
}
public void CanGetChangedVerticesSimplifiedZigZag()
{
// the source polyline visits the same points several times by going back and forth
ISpatialReference lv95 =
SpatialReferenceUtils.CreateSpatialReference(WellKnownHorizontalCS.LV95);
IPolyline sourcePolyline = GeometryFactory.CreatePolyline(
lv95,
GeometryFactory.CreatePoint(0, 0),
GeometryFactory.CreatePoint(10, 0),
GeometryFactory.CreatePoint(20, 0),
GeometryFactory.CreatePoint(10, 0),
GeometryFactory.CreatePoint(20, 0),
GeometryFactory.CreatePoint(30, 10));
IPolyline simplifiedPolyline = GeometryFactory.Clone(sourcePolyline);
const bool allowNonPlanarLines = false;
string nonSimpleReasonDescription;
GeometryNonSimpleReason?nonSimpleReason;
bool isSimple = GeometryUtils.IsGeometrySimple(sourcePolyline,
lv95,
allowNonPlanarLines,
out nonSimpleReasonDescription,
out nonSimpleReason);
Assert.IsFalse(isSimple);
GeometryUtils.Simplify(simplifiedPolyline, true, !allowNonPlanarLines);
var geometryComparison = new GeometryComparison(
sourcePolyline, simplifiedPolyline, 0.00125, 0.0125);
const bool reportDuplicateVertices = true;
IList <WKSPointZ> changes = geometryComparison.GetDifferentVertices(false,
reportDuplicateVertices);
Assert.AreEqual(2, changes.Count);
changes =
geometryComparison.GetDifferentVertices(true, reportDuplicateVertices);
Assert.AreEqual(2, changes.Count);
changes = geometryComparison.GetDifferentVertices(true, false);
Assert.AreEqual(0, changes.Count);
geometryComparison = new GeometryComparison(
simplifiedPolyline, sourcePolyline, 0.00125, 0.0125);
changes =
geometryComparison.GetDifferentVertices(false, reportDuplicateVertices);
Assert.AreEqual(0, changes.Count);
changes =
geometryComparison.GetDifferentVertices(true, reportDuplicateVertices);
Assert.AreEqual(2, changes.Count);
changes = geometryComparison.GetDifferentVertices(true, false);
Assert.AreEqual(0, changes.Count);
}
public void CanDeterminePolygonReshapeSideInsideOnlySeveralParts()
{
ISpatialReference spatialReference = SpatialReferenceUtils.CreateSpatialReference(
WellKnownHorizontalCS.LV95, WellKnownVerticalCS.LHN95);
IGeometry geometryToReshape =
GeometryFactory.CreatePolygon(100, 100, 200, 200, spatialReference);
IGeometry reshapeLine =
GeometryFactory.CreatePolyline(spatialReference,
GeometryFactory.CreatePoint(100, 200),
GeometryFactory.CreatePoint(150, 100),
GeometryFactory.CreatePoint(200, 200));
ReshapeInfo reshapeInfo = Reshape(GeometryFactory.Clone(geometryToReshape),
reshapeLine, false);
ExpectResult(reshapeInfo, RingReshapeSideOfLine.Left, 5000, 1, 1);
const bool useNonDefaultSide = true;
reshapeInfo = Reshape(GeometryFactory.Clone(geometryToReshape),
reshapeLine, useNonDefaultSide);
ExpectResult(reshapeInfo, RingReshapeSideOfLine.Right, 5000, 2, 2);
}
public void CanReshapeMultipatch()
{
ISpatialReference lv95 = SpatialReferenceUtils.CreateSpatialReference(
WellKnownHorizontalCS.LV95);
IPolygon polygon = GeometryFactory.CreatePolygon(
GeometryFactory.CreateEnvelope(2600000, 1200000, 500, 50, 20, lv95));
IMultiPatch multiPatch = GeometryFactory.CreateMultiPatch(
polygon);
IPolyline cutLine = GeometryFactory.CreateLine(
GeometryFactory.CreatePoint(2600000 - 100, 1200000),
GeometryFactory.CreatePoint(2600000 + 100, 1200000));
cutLine.SpatialReference = lv95;
var reshapePath = (IPath)((IGeometryCollection)cutLine).Geometry[0];
var reshapeInfo = new ReshapeInfo(multiPatch, reshapePath, null);
IList <ReshapeInfo> singleReshapes;
ReshapeUtils.ReshapeAllGeometryParts(reshapeInfo, reshapePath,
out singleReshapes);
var reshapedRing = (IRing)((IGeometryCollection)multiPatch).Geometry[0];
Assert.True(MathUtils.AreEqual(((IArea)reshapedRing).Area,
((IArea)polygon).Area / 2,
0.1));
}
public void CanCutMultipatchWithInnerRingThroughInnerRing()
{
ISpatialReference lv95 = SpatialReferenceUtils.CreateSpatialReference(
WellKnownHorizontalCS.LV95);
IPolygon originalPoly = GeometryFactory.CreatePolygon(
GeometryFactory.CreateEnvelope(2600000, 1200000, 500, 50, 50, lv95));
IPolygon innerRingPoly = GeometryFactory.CreatePolygon(
GeometryFactory.CreateEnvelope(2600000, 1200000, 500, 10, 10, lv95));
var innerRing = (IRing)((IGeometryCollection)innerRingPoly).Geometry[0];
innerRing.ReverseOrientation();
IMultiPatch multiPatch = GeometryFactory.CreateMultiPatch(originalPoly);
GeometryFactory.AddRingToMultiPatch(innerRing, multiPatch,
esriMultiPatchRingType
.esriMultiPatchInnerRing);
// cut line cuts through the inner ring
IPolyline cutLine = GeometryFactory.CreateLine(
GeometryFactory.CreatePoint(2600000 - 100, 1200000),
GeometryFactory.CreatePoint(2600000 + 100, 1200000));
cutLine.SpatialReference = lv95;
IFeature mockFeature = TestUtils.CreateMockFeature(multiPatch);
var cutter = new FeatureCutter(new[] { mockFeature });
cutter.ZSourceProvider =
new DatasetSpecificSettingProvider <ChangeAlongZSource>(
string.Empty, ChangeAlongZSource.SourcePlane);
cutter.Cut(cutLine);
IList <IGeometry> results = cutter.ResultGeometriesByFeature[mockFeature];
Assert.AreEqual(2, results.Count);
double areaSum = 0;
var partCount = 0;
foreach (IGeometry result in cutter.ResultGeometriesByFeature[mockFeature])
{
Assert.IsFalse(GeometryUtils.HasUndefinedZValues(result));
areaSum +=
GeometryUtils.GetParts((IGeometryCollection)result)
.Sum(part => ((IArea)part).Area);
partCount += GeometryUtils.GetParts((IGeometryCollection)result).Count();
}
Assert.AreEqual(2, partCount);
Assert.AreEqual(((IArea)originalPoly).Area + ((IArea)innerRing).Area,
areaSum, 0.0001);
}
public void CanValidateReshapeLine()
{
ISpatialReference sr = SpatialReferenceUtils.CreateSpatialReference(
WellKnownHorizontalCS.LV95, WellKnownVerticalCS.LHN95);
IPath reshapePath = GeometryFactory.CreatePath(
GeometryFactory.CreatePoint(2600000.12, 1200000.12, sr),
GeometryFactory.CreatePoint(2600000.121, 1200000.121, sr));
IPolyline polyline = GeometryFactory.CreatePolyline(2600000, 1200000, 2600001,
1200001);
var reshapeInfo = new ReshapeInfo(polyline, reshapePath, null);
// It says it's closed but it's just a bit short
Assert.IsTrue(reshapePath.IsClosed);
Assert.IsFalse(reshapeInfo.ValidateReshapePath());
// even with 3 points:
WKSPoint middlePoint;
middlePoint.X = 2600000.1205;
middlePoint.Y = 1200000.1205;
((IPointCollection)reshapePath).InsertWKSPoints(1, 1, middlePoint);
reshapeInfo = new ReshapeInfo(polyline, reshapePath, null);
Assert.IsTrue(reshapePath.IsClosed);
Assert.IsFalse(reshapeInfo.ValidateReshapePath());
}
public void CanCreateFeatureWithoutTableSchema()
{
ISpatialReference sr =
SpatialReferenceUtils.CreateSpatialReference(WellKnownHorizontalCS.LV95);
IPolygon shape = GeometryFactory.CreatePolygon(
GeometryFactory.CreatePoint(2600000, 1200000, sr),
GeometryFactory.CreatePoint(2600050, 1200080, sr));
GdbObjectMsg featureMsg = new GdbObjectMsg
{
ClassHandle = -1,
ObjectId = 42,
Shape = ProtobufGeometryUtils.ToShapeMsg(shape)
};
GdbFeatureClass fClass =
new GdbFeatureClass(1, "Test", esriGeometryType.esriGeometryPolygon);
GdbRow gdbRow = ProtobufConversionUtils.FromGdbObjectMsg(featureMsg, fClass);
GdbFeature feature = (GdbFeature)gdbRow;
Assert.AreEqual(42, feature.OID);
Assert.True(GeometryUtils.AreEqual(shape, feature.Shape));
Assert.AreEqual(1, feature.Class.ObjectClassID);
}
public void CanDetectNonUniqueSpatialReference()
{
ISpatialReference sref1 = SpatialReferenceUtils.CreateSpatialReference(
WellKnownHorizontalCS.LV95);
ISpatialReference sref2 = SpatialReferenceUtils.CreateSpatialReference(
WellKnownHorizontalCS.LV03);
ISpatialReference sref3 = SpatialReferenceUtils.CreateSpatialReference(
WellKnownHorizontalCS.LV95, WellKnownVerticalCS.LHN95);
SpatialReferenceUtils.SetXYDomain(sref1, 0, 0, 1000, 1000, 0.001, 0.01);
SpatialReferenceUtils.SetXYDomain(sref2, 0, 0, 1000, 1000, 0.00001, 0.0001);
SpatialReferenceUtils.SetXYDomain(sref3, 0, 0, 1000, 1000, 0.0001, 0.001);
var spatialReferences = new List <ISpatialReference> {
sref1, sref2, sref3
};
string exception = null;
try
{
TestUtils.GetUniqueSpatialReference(spatialReferences,
requireEqualVerticalCoordinateSystems
: true);
}
catch (Exception ex)
{
exception = ex.Message;
}
Assert.True(exception == "Coordinate systems are not equal: CH1903_LV03, CH1903+_LV95");
}
public void SetupFixture()
{
_lic.Checkout();
_spatialReference = SpatialReferenceUtils.CreateSpatialReference(
WellKnownHorizontalCS.LV95);
}
private IFeature CreateEmptyGeometryFeature(IFeatureWorkspace ws,
esriGeometryType geometryType,
IGeometry andAlso = null)
{
ISpatialReference sr = SpatialReferenceUtils.CreateSpatialReference
((int)esriSRProjCS2Type.esriSRProjCS_CH1903Plus_LV95,
true);
IFeatureClass featureClass =
EnsureFeatureClass(ws, geometryType, geometryType.ToString(), sr);
IGdbTransaction transaction = new GdbTransaction();
IFeature feature = null;
bool inserted = transaction.Execute((IWorkspace)ws, () =>
{
if (andAlso != null)
{
andAlso.SpatialReference = sr;
IFeature nonEmpty = featureClass.CreateFeature();
nonEmpty.Shape = andAlso;
nonEmpty.Store();
}
feature = featureClass.CreateFeature();
// NOTE: There is no difference when setting an empty geometry
feature.Store();
}, "Insert feature");
Assert.IsTrue(inserted);
return(feature);
}
/// <summary>
/// Returns two overlapping square polygons:
///
/// _____________
/// | |
/// | target |
/// ______|______ |
/// | | | |
/// | | | |
/// | |______|______|
/// | |
/// | source |
/// |_____________|
///
/// </summary>
/// <param name="sourceFeature"></param>
/// <param name="targetFeature"></param>
/// <returns></returns>
private static void GetOverlappingPolygons(out GdbFeature sourceFeature,
out GdbFeature targetFeature)
{
var fClass =
new GdbFeatureClass(123, "TestFC", esriGeometryType.esriGeometryPolygon);
var sr = SpatialReferenceUtils.CreateSpatialReference(
WellKnownHorizontalCS.LV95, WellKnownVerticalCS.LN02);
fClass.SpatialReference = sr;
IPolygon polygon1 = GeometryFactory.CreatePolygon(
GeometryFactory.CreatePoint(2600000, 1200000, sr),
GeometryFactory.CreatePoint(2601000, 1201000, sr));
polygon1.SpatialReference = sr;
sourceFeature = new GdbFeature(42, fClass)
{
Shape = polygon1
};
IPolygon polygon2 = GeometryFactory.CreatePolygon(
GeometryFactory.CreatePoint(2600500, 1200500, sr),
GeometryFactory.CreatePoint(2601500, 1201500, sr));
polygon2.SpatialReference = sr;
targetFeature = new GdbFeature(43, fClass)
{
Shape = polygon2
};
}
public void CanCreateBagWithCopies()
{
ISpatialReference sref =
SpatialReferenceUtils.CreateSpatialReference(WellKnownHorizontalCS.LV95);
IGeometry pt1 = GeometryFactory.CreatePoint(100, 200, 0);
IGeometry pt2 = GeometryFactory.CreatePoint(100, 200, 0);
pt1.SpatialReference = sref;
IGeometryBag bag = GeometryFactory.CreateBag(pt1, pt2);
var collection = (IGeometryCollection)bag;
Assert.AreEqual(2, collection.GeometryCount);
IGeometry bagPt1 = collection.get_Geometry(0);
IGeometry bagPt2 = collection.get_Geometry(1);
// expect copies in the bag
Assert.AreNotEqual(pt1, bagPt1);
Assert.AreNotEqual(pt2, bagPt2);
Assert.IsTrue(
SpatialReferenceUtils.AreEqual(sref, bag.SpatialReference, true, true));
Assert.IsTrue(
SpatialReferenceUtils.AreEqual(sref, bagPt1.SpatialReference, true,
true));
Assert.IsTrue(
SpatialReferenceUtils.AreEqual(sref, bagPt2.SpatialReference, true,
true));
}
public void CanConvertToFromFeature()
{
var sr = SpatialReferenceUtils.CreateSpatialReference(
WellKnownHorizontalCS.LV95,
WellKnownVerticalCS.LN02);
var fClass = new GdbFeatureClass(123, "TestFC", esriGeometryType.esriGeometryPolygon);
fClass.SpatialReference = sr;
GdbFeature featureWithNoShape = new GdbFeature(41, fClass);
AssertCanConvertToDtoAndBack(featureWithNoShape);
IPolygon polygon = GeometryFactory.CreatePolygon(
GeometryFactory.CreatePoint(2600000, 1200000, sr),
GeometryFactory.CreatePoint(2601000, 1201000, sr));
polygon.SpatialReference = sr;
GdbFeature featureWithShape = new GdbFeature(42, fClass)
{
Shape = polygon
};
AssertCanConvertToDtoAndBack(featureWithShape);
}
private static IFeatureWorkspace CreateTestWorkspace(
[NotNull] string fgdbName,
[NotNull] string fcName, [NotNull] string tableName, [NotNull] string relClassName,
[NotNull] out IFeatureClass fc,
[NotNull] out ITable table,
[NotNull] out IRelationshipClass rc)
{
IFeatureWorkspace ws = TestWorkspaceUtils.CreateTestFgdbWorkspace(fgdbName);
ISpatialReference sref = SpatialReferenceUtils.CreateSpatialReference(
(int)esriSRProjCS2Type.esriSRProjCS_CH1903Plus_LV95, true);
fc = DatasetUtils.CreateSimpleFeatureClass(
ws, fcName, null,
FieldUtils.CreateOIDField(),
FieldUtils.CreateIntegerField("FKEY"),
FieldUtils.CreateShapeField(
"SHAPE", esriGeometryType.esriGeometryPoint,
sref, 1000));
table = DatasetUtils.CreateTable(ws, tableName,
FieldUtils.CreateOIDField(),
FieldUtils.CreateTextField("TEXT", 100));
rc = TestWorkspaceUtils.CreateSimple1NRelationship(
ws, relClassName,
table, (ITable)fc,
table.OIDFieldName, "FKEY");
return(ws);
}
public void CanGetUniqueSpatialReferenceIgnoringVerticalCoordinateSystems()
{
ISpatialReference sref1 = SpatialReferenceUtils.CreateSpatialReference(
WellKnownHorizontalCS.LV95);
ISpatialReference sref2 = SpatialReferenceUtils.CreateSpatialReference(
WellKnownHorizontalCS.LV95, WellKnownVerticalCS.LN02);
ISpatialReference sref3 = SpatialReferenceUtils.CreateSpatialReference(
WellKnownHorizontalCS.LV95, WellKnownVerticalCS.LHN95);
const double maxRes = 0.00001;
SpatialReferenceUtils.SetXYDomain(sref1, 0, 0, 1000, 1000, maxRes * 100,
0.01);
SpatialReferenceUtils.SetXYDomain(sref2, 0, 0, 1000, 1000, maxRes * 10,
0.001);
SpatialReferenceUtils.SetXYDomain(sref3, 0, 0, 1000, 1000, maxRes, 0.0001);
var spatialReferences = new List <ISpatialReference> {
sref1, sref2, sref3
};
ISpatialReference uniqueSpatialReference =
TestUtils.GetUniqueSpatialReference(
spatialReferences, requireEqualVerticalCoordinateSystems: false);
Assert.IsNotNull(uniqueSpatialReference);
Assert.AreEqual(maxRes,
SpatialReferenceUtils.GetXyResolution(
uniqueSpatialReference));
}
private static void VerifyErrorHasZ(IFeatureWorkspace ws)
{
IFieldsEdit fields = new FieldsClass();
fields.AddField(FieldUtils.CreateOIDField());
fields.AddField(FieldUtils.CreateShapeField(
"Shape", esriGeometryType.esriGeometryPolyline,
SpatialReferenceUtils.CreateSpatialReference
((int)esriSRProjCS2Type.esriSRProjCS_CH1903Plus_LV95,
true), 1000, true, false));
IFeatureClass featureClass =
DatasetUtils.CreateSimpleFeatureClass(ws, "VerifyErrorHasZ", fields,
null);
// make sure the table is known by the workspace
((IWorkspaceEdit)ws).StartEditing(false);
((IWorkspaceEdit)ws).StopEditing(true);
IPolycurve line1 = CurveConstruction.StartLine(0, 0, 5)
.LineTo(2, 0, 5)
.Curve;
IFeature row1 = featureClass.CreateFeature();
row1.Shape = line1;
row1.Store();
IPolycurve line2 = CurveConstruction.StartLine(-1, 0.02, 5)
.LineTo(1, 0.02, 5)
.Curve;
IFeature row2 = featureClass.CreateFeature();
row2.Shape = line2;
row2.Store();
var test = new QaNotNear(featureClass, 0.1, 0.5);
var runners =
new List <QaTestRunnerBase>
{
new QaTestRunner(test)
{
KeepGeometry = true
},
new QaContainerTestRunner(1000, test)
{
KeepGeometry = true
}
};
foreach (QaTestRunnerBase runner in runners)
{
runner.Execute();
Assert.True(runner.ErrorGeometries.Count > 0);
foreach (IGeometry errorGeometry in runner.ErrorGeometries)
{
Assert.AreEqual(5, errorGeometry.Envelope.ZMin);
}
}
}
public void CanReadWriteMultipointXy()
{
var points = new WKSPointZ[4];
points[0] = new WKSPointZ {
X = 2600000, Y = 1200000, Z = double.NaN
};
points[1] = new WKSPointZ {
X = 2600030, Y = 1200020, Z = double.NaN
};
points[2] = new WKSPointZ {
X = 2600020, Y = 1200030, Z = double.NaN
};
points[3] = new WKSPointZ {
X = 2600040, Y = 1200040, Z = double.NaN
};
ISpatialReference sr =
SpatialReferenceUtils.CreateSpatialReference(WellKnownHorizontalCS.LV95);
IMultipoint multipoint = GeometryFactory.CreateMultipoint(points, sr);
GeometryUtils.MakeNonZAware(multipoint);
WkbGeometryWriter writer = new WkbGeometryWriter();
byte[] wkb = writer.WriteMultipoint(multipoint);
// ArcObjects
byte[] arcObjectsWkb = GeometryUtils.ToWkb(multipoint);
Assert.AreEqual(wkb, arcObjectsWkb);
// Wkx
byte[] wkx = ToChristianSchwarzWkb(ToWkxMultipoint(points, Ordinates.Xy));
Assert.AreEqual(wkx, wkb);
// Bonus test: Geom
WkbGeomWriter geomWriter = new WkbGeomWriter();
Multipoint <IPnt> multipnt = GeometryConversionUtils.CreateMultipoint(multipoint);
byte[] wkbGeom = geomWriter.WriteMultipoint(multipnt, Ordinates.Xy);
Assert.AreEqual(wkb, wkbGeom);
WkbGeometryReader reader = new WkbGeometryReader();
IMultipoint restored = reader.ReadMultipoint(new MemoryStream(wkb));
Assert.IsTrue(GeometryUtils.AreEqual(multipoint, restored));
// Geom
WkbGeomReader geomReader = new WkbGeomReader();
Multipoint <IPnt> deserializedPnts =
geomReader.ReadMultiPoint(new MemoryStream(wkbGeom));
Assert.IsTrue(
GeomRelationUtils.AreMultipointsEqualXY(multipnt, deserializedPnts,
double.Epsilon));
}
private static ISpatialReference CreateSpatialReference()
{
ISpatialReference sref =
SpatialReferenceUtils.CreateSpatialReference(WellKnownHorizontalCS.LV95, true);
((ISpatialReferenceResolution)sref).set_XYResolution(true, 0.01);
return(sref);
}
public void CanDetermineNodeDegreeAtAreaOfInterestBoundaryOneEdgeFullyOutside()
{
// General idea: The southernmost edge can be traversed from the inside to the
// outside, but not vice versa. Degree 3 should be determined correctly
// _______________________
// | |
// | \ / |
// |_____\___/___________|
// \ /
// |
// |
// |
ISpatialReference sr = SpatialReferenceUtils.CreateSpatialReference(
WellKnownHorizontalCS.LV95, WellKnownVerticalCS.LHN95);
IEnvelope aoi = GeometryFactory.CreateEnvelope(2600000, 1200000, 2600100, 1200100, sr);
FeatureClassMock edgeClass =
new FeatureClassMock(1, "ROADS", esriGeometryType.esriGeometryPolyline);
PolylineGraphConnectivity connectivity = new PolylineGraphConnectivity(sr, aoi);
// Create node with degree 3 where one feature is partially outside the AOI
IPoint junction = GeometryFactory.CreatePoint(2600050, 1199900, sr);
FeatureMock feature1 =
new FeatureMock(11, edgeClass)
{
Shape = GeometryFactory.CreatePolyline(
GeometryFactory.CreatePoint(2600050, 1199800, sr),
junction)
};
FeatureMock feature2 =
new FeatureMock(12, edgeClass)
{
Shape = GeometryFactory.CreatePolyline(
junction,
GeometryFactory.CreatePoint(2600030, 1200050, sr))
};
FeatureMock feature3 =
new FeatureMock(13, edgeClass)
{
Shape = GeometryFactory.CreatePolyline(
junction,
GeometryFactory.CreatePoint(2600070, 1200050, sr))
};
connectivity.AddConnectivity(feature1, false);
connectivity.AddConnectivity(feature2, false);
connectivity.AddConnectivity(feature3, false);
var edges = connectivity.GetIncidentEdges(junction).ToList();
Assert.AreEqual(0, edges.Count);
}
public void CanSplitEdgeOnNodeInsertion()
{
ISpatialReference sr = SpatialReferenceUtils.CreateSpatialReference(
WellKnownHorizontalCS.LV95, WellKnownVerticalCS.LHN95);
FeatureClassMock edgeClass, junctionClass;
LinearNetworkDef networkDef = CreateSimpleNetworkDef(out edgeClass, out junctionClass);
var networkFeatureFinder = new NetworkFeatureFinderMock();
LinearNetworkEditAgent observer = new LinearNetworkEditAgent(
networkDef, networkFeatureFinder);
observer.NoCaching = true;
// Existing feature:
IPolyline edge1Polyline = GeometryFactory.CreatePolyline(
GeometryFactory.CreatePoint(2600000, 1200000, 450, double.NaN, sr),
GeometryFactory.CreatePoint(2600020, 1200010, 452, double.NaN, sr));
IFeature existingFeature = CreateInOperation(
() => CreateFeature(edgeClass, edge1Polyline), observer);
Assert.AreEqual(1, observer.GetCreatedInLastOperation().Count());
Assert.IsTrue(existingFeature == observer.GetCreatedInLastOperation().First());
// New features get added to the feature finder's cache: 1 edge + 2 junctions
Assert.AreEqual(3, networkFeatureFinder.TargetFeatureCandidates.Count);
// Create edge snapped onto interior (Z actually does not matter):
IPolyline edge2Polyline = GeometryFactory.CreatePolyline(
GeometryFactory.CreatePoint(2600010, 1200010, 450, double.NaN, sr),
GeometryFactory.CreatePoint(2600010, 1200005, 451, double.NaN, sr));
IFeature snappedFeature = CreateInOperation(
() => CreateFeature(edgeClass, edge2Polyline), observer);
Assert.NotNull(snappedFeature);
Assert.AreEqual(1, observer.GetCreatedInLastOperation().Count());
// 3 original features + 1 new edge + 2 junctions + 1 new split-edge
Assert.AreEqual(7, networkFeatureFinder.TargetFeatureCandidates.Count);
// Now just add a junction feature
IPoint junctionPoint =
GeometryFactory.CreatePoint(2600002, 1200001, 450, double.NaN, sr);
IFeature insertedJunction = CreateInOperation(
() => CreateFeature(junctionClass, junctionPoint), observer);
Assert.NotNull(insertedJunction);
Assert.AreEqual(1, observer.GetCreatedInLastOperation().Count());
// 7 original features + 1 new junction + 1 new split-edge
Assert.AreEqual(9, networkFeatureFinder.TargetFeatureCandidates.Count);
}
public void CanGetOpenJawReshapeLineReplaceEndPoint()
{
var fClass =
new GdbFeatureClass(123, "TestFC", esriGeometryType.esriGeometryPolyline);
var sr = SpatialReferenceUtils.CreateSpatialReference(
WellKnownHorizontalCS.LV95,
WellKnownVerticalCS.LN02);
fClass.SpatialReference = sr;
IPath sourcePath = GeometryFactory.CreatePath(
GeometryFactory.CreatePoint(2600500, 1200000, sr),
GeometryFactory.CreatePoint(2600500, 1200500, sr),
GeometryFactory.CreatePoint(2601000, 1200500, sr));
sourcePath.SpatialReference = sr;
IPolyline sourcePolyline = GeometryFactory.CreatePolyline(sourcePath);
GdbFeature sourceFeature = new GdbFeature(42, fClass)
{
Shape = sourcePolyline
};
IPath reshapePath = GeometryFactory.CreatePath(
GeometryFactory.CreatePoint(2600500, 1200500, sr),
GeometryFactory.CreatePoint(2600500, 1201000, sr));
reshapePath.SpatialReference = sr;
IPolyline reshapePolyline = GeometryFactory.CreatePolyline(reshapePath);
var sourceFeatureMsg = ProtobufGdbUtils.ToGdbObjectMsg(sourceFeature);
var reshapePathMsg = ProtobufGeometryUtils.ToShapeMsg(reshapePolyline);
var request = new OpenJawReshapeLineReplacementRequest
{
Feature = sourceFeatureMsg,
ReshapePath = reshapePathMsg
};
ShapeMsg response =
AdvancedReshapeServiceUtils.GetOpenJawReshapeReplaceEndPoint(request);
IPoint resultPoint = (IPoint)ProtobufGeometryUtils.FromShapeMsg(response);
Assert.IsTrue(GeometryUtils.AreEqual(sourcePolyline.ToPoint, resultPoint));
// Non-default side:
request.UseNonDefaultReshapeSide = true;
response =
AdvancedReshapeServiceUtils.GetOpenJawReshapeReplaceEndPoint(request);
resultPoint = (IPoint)ProtobufGeometryUtils.FromShapeMsg(response);
Assert.IsTrue(GeometryUtils.AreEqual(sourcePolyline.FromPoint, resultPoint));
}
public void CanGetRasterFileFromMosaicDatasetUsingSpatialQuery()
{
IWorkspace workspace = TestUtils.OpenUserWorkspaceOracle();
IMosaicDataset mosaicDataset = DatasetUtils.OpenMosaicDataset(workspace,
"TOPGIS_TLM.TLM_DTM_MOSAIC");
IFeatureClass rasterCatalog = mosaicDataset.Catalog;
IEnvelope winterthur = GeometryFactory.CreateEnvelope(
2690000, 1254000, 2707500, 1266000,
SpatialReferenceUtils.CreateSpatialReference(WellKnownHorizontalCS.LV95));
winterthur.Expand(-0.1, -0.1, false);
IQueryFilter spatialFilter =
GdbQueryUtils.CreateSpatialFilter(rasterCatalog, winterthur);
IStringArray stringArray;
Stopwatch watch = Stopwatch.StartNew();
int count = 0;
foreach (IFeature catalogFeature in GdbQueryUtils.GetFeatures(
rasterCatalog, spatialFilter, false))
{
// Method 1 (slow):
var rasterCatalogItem = (IRasterCatalogItem)catalogFeature;
IRasterDataset rasterDataset = rasterCatalogItem.RasterDataset;
var itemPaths = (IItemPaths)rasterDataset;
stringArray = itemPaths.GetPaths();
Marshal.ReleaseComObject(rasterDataset);
Assert.AreEqual(1, stringArray.Count);
string resultPathViaRasterDataset = stringArray.Element[0];
// Method 2 (fast):
var itemPathsQuery = (IItemPathsQuery)mosaicDataset;
if (itemPathsQuery.QueryPathsParameters == null)
{
itemPathsQuery.QueryPathsParameters = new QueryPathsParametersClass();
}
stringArray = itemPathsQuery.GetItemPaths(catalogFeature);
Assert.AreEqual(1, stringArray.Count);
string resultPathViaItemPathsQuery = stringArray.Element[0];
Assert.AreEqual(resultPathViaRasterDataset, resultPathViaItemPathsQuery);
count++;
}
Console.WriteLine("Successfully extracted {0} raster paths in {1}s", count,
watch.Elapsed.TotalSeconds);
}
private void TestConnections(IFeatureWorkspace ws)
{
IFieldsEdit fields = new FieldsClass();
fields.AddField(FieldUtils.CreateOIDField());
fields.AddField(FieldUtils.CreateIntegerField("LineTyp", "LineTyp"));
fields.AddField(FieldUtils.CreateShapeField(
"Shape", esriGeometryType.esriGeometryPolyline,
SpatialReferenceUtils.CreateSpatialReference
((int)esriSRProjCS2Type.esriSRProjCS_CH1903Plus_LV95,
true), 1000, false, false));
IFeatureClass fc =
DatasetUtils.CreateSimpleFeatureClass(ws, "TestConnections", fields,
null);
IList <ITable> tbls = new[] { (ITable)fc };
// make sure the table is known by the workspace
((IWorkspaceEdit)ws).StartEditing(false);
((IWorkspaceEdit)ws).StopEditing(true);
{
IFeature row = fc.CreateFeature();
row.set_Value(1, 1);
row.Shape =
CurveConstruction.StartLine(100, 100).LineTo(200, 200).Curve;
row.Store();
}
{
IFeature row = fc.CreateFeature();
row.set_Value(1, 2);
row.Shape =
CurveConstruction.StartLine(100, 100.1).LineTo(100, 200).Curve;
row.Store();
}
IList <QaConnectionRule> rules = new[]
{
new QaConnectionRule(tbls, new[] { "LineTyp = 1" }),
new QaConnectionRule(tbls, new[] { "LineTyp = 2" })
};
var test = new QaConnections(new[] { fc }, rules, 0);
test.QaError += Test_QaError;
_errorCount = 0;
test.Execute();
Assert.AreEqual(0, _errorCount);
test.QaError -= Test_QaError;
var container = new TestContainer();
container.AddTest(test);
container.QaError += Test_QaError;
_errorCount = 0;
container.Execute();
Assert.AreEqual(0, _errorCount);
}
public void SetUp()
{
_wgs84 = SpatialReferenceUtils.CreateSpatialReference(
(int)esriSRGeoCSType.esriSRGeoCS_WGS1984,
true);
_lv95 = SpatialReferenceUtils.CreateSpatialReference(
WellKnownHorizontalCS.LV95,
true);
}
private static ISpatialReference CreateLV95()
{
ISpatialReference result = SpatialReferenceUtils.CreateSpatialReference
((int)esriSRProjCS2Type.esriSRProjCS_CH1903Plus_LV95, true);
SpatialReferenceUtils.SetXYDomain(result, -10000, -10000, 10000, 10000,
0.0001, _xyTolerance);
return(result);
}
public void CanFindJunctionAtEdgeEnd()
{
const string fgdbName = "NetworkJunctionFinderTest.gdb";
// Create FGDB with test features:
IFeatureClass edgeClass, junctionClass;
LinearNetworkGdbFeatureFinder featureFinder =
CreateTestGdbSchema(fgdbName, out edgeClass, out junctionClass);
ISpatialReference lv95 =
SpatialReferenceUtils.CreateSpatialReference(WellKnownHorizontalCS.LV95);
IPoint fromPoint1 = GeometryFactory.CreatePoint(2600000, 1200000, lv95);
IPoint toPoint1 = GeometryFactory.CreatePoint(2600020, 1200010, lv95);
CreateEdge(edgeClass, fromPoint1, toPoint1);
Assert.AreEqual(0, featureFinder.FindJunctionFeaturesAt(fromPoint1).Count);
Assert.AreEqual(0, featureFinder.FindJunctionFeaturesAt(toPoint1).Count);
IFeature from1Junction = CreateJunction(junctionClass, fromPoint1);
IList <IFeature> found = featureFinder.FindJunctionFeaturesAt(fromPoint1);
Assert.AreEqual(1, found.Count);
Assert.AreEqual(from1Junction.OID, found[0].OID);
Assert.AreEqual(0, featureFinder.FindJunctionFeaturesAt(toPoint1).Count);
// Duplicate junction (different Z)
fromPoint1.Z = 123;
IFeature fromJunction2 = CreateJunction(junctionClass, fromPoint1);
found = featureFinder.FindJunctionFeaturesAt(fromPoint1);
Assert.AreEqual(2, found.Count);
Assert.AreNotEqual(found[0].OID, found[1].OID);
Assert.IsTrue(found.Any(
j => GdbObjectUtils.IsSameObject(
j, fromJunction2, ObjectClassEquality.SameInstance)));
Assert.IsTrue(found[0].Class == junctionClass && found[1].Class == junctionClass);
// Stand-alone junction
IPoint disjointPoint = GeometryFactory.CreatePoint(2600025, 1200011, lv95);
found = featureFinder.FindJunctionFeaturesAt(disjointPoint);
Assert.AreEqual(0, found.Count);
IFeature standalone = CreateJunction(junctionClass, disjointPoint);
found = featureFinder.FindJunctionFeaturesAt(disjointPoint);
Assert.AreEqual(1, found.Count);
Assert.IsTrue(GdbObjectUtils.IsSameObject(found[0], standalone,
ObjectClassEquality.SameInstance));
}
private static ISpatialReference CreateSpatialReference()
{
ISpatialReference spatialReference =
SpatialReferenceUtils.CreateSpatialReference(WellKnownHorizontalCS.LV95);
SpatialReferenceUtils.SetXYDomain(spatialReference,
-1000, -1000, 1000, 1000,
0.0001, 0.001);
return(spatialReference);
}
private static ISpatialReference CreateSpatialReference()
{
ISpatialReference result = SpatialReferenceUtils.CreateSpatialReference(
WellKnownHorizontalCS.LV95, true);
SpatialReferenceUtils.SetXYDomain(result, -100000, -100000, 100000, 100000,
_resolution, _tolerance);
return(result);
}
public void CanCreateGdbFeatureClass()
{
// An in-memory backing dataset is created automatically, if no factory method is provided
GdbFeatureClass gdbFeatureClass =
new GdbFeatureClass(41, "TESTABLE", esriGeometryType.esriGeometryPoint,
"Test table");
IFeatureClass featureClass = gdbFeatureClass;
Assert.AreEqual(41, featureClass.ObjectClassID);
Assert.AreEqual("TESTABLE", DatasetUtils.GetName(featureClass));
Assert.AreEqual("Test table",
DatasetUtils.GetAliasName(featureClass));
Assert.AreEqual(esriGeometryType.esriGeometryPoint,
featureClass.ShapeType);
Assert.False(featureClass.HasOID);
Assert.Null(featureClass.OIDFieldName);
Assert.AreEqual(0, GdbQueryUtils.Count(featureClass, ""));
// Add OID field
gdbFeatureClass.AddField(FieldUtils.CreateOIDField());
// Add Shape field
gdbFeatureClass.AddField(
FieldUtils.CreateShapeField(
esriGeometryType.esriGeometryPoint,
SpatialReferenceUtils.CreateSpatialReference(WellKnownHorizontalCS.LV95)));
Assert.True(featureClass.HasOID);
Assert.AreEqual("OBJECTID", featureClass.OIDFieldName);
Assert.AreEqual("SHAPE", featureClass.ShapeFieldName);
IQueryFilter queryFilter = GdbQueryUtils.CreateQueryFilter("OBJECTID");
queryFilter.WhereClause = "OBJECTID < 0";
Assert.AreEqual(0,
GdbQueryUtils.Count(featureClass, queryFilter));
var backingDataset = gdbFeatureClass.BackingDataset as InMemoryDataset;
Assert.NotNull(backingDataset);
backingDataset.AllRows.Add(new GdbRow(1, gdbFeatureClass));
Assert.AreEqual(0,
GdbQueryUtils.Count(featureClass, queryFilter));
queryFilter.WhereClause = "OBJECTID > 0";
Assert.AreEqual(1,
GdbQueryUtils.Count(featureClass, queryFilter));
}
public void CanKeepConnectedStableOnMerge()
{
ISpatialReference sr = SpatialReferenceUtils.CreateSpatialReference(
WellKnownHorizontalCS.LV95, WellKnownVerticalCS.LHN95);
FeatureClassMock edgeClass, junctionClass;
LinearNetworkDef networkDef = CreateSimpleNetworkDef(out edgeClass, out junctionClass);
var networkFeatureFinder = new NetworkFeatureFinderMock();
LinearNetworkEditAgent observer = new LinearNetworkEditAgent(
networkDef, networkFeatureFinder)
{
NoCaching = true
};
// Existing feature:
IPolyline edge1Polyline = GeometryFactory.CreatePolyline(
GeometryFactory.CreatePoint(2600000, 1200000, 450, double.NaN, sr),
GeometryFactory.CreatePoint(2600020, 1200010, 452, double.NaN, sr));
IFeature existingFeature = CreateInOperation(
() => CreateFeature(edgeClass, edge1Polyline), observer);
// Add a connected edge feature:
IPolyline edge2Polyline =
GeometryFactory.CreatePolyline(
GeometryFactory.CreatePoint(2600020, 1200010, 452, double.NaN, sr),
GeometryFactory.CreatePoint(2600030, 1200005, 450, double.NaN, sr));
IPolyline edge2PolylineOrig = GeometryFactory.Clone(edge2Polyline);
IFeature secondEdge = CreateInOperation(
() => CreateFeature(edgeClass, edge2Polyline), observer);
Assert.NotNull(secondEdge);
Assert.AreEqual(1, observer.GetCreatedInLastOperation().Count());
IPolyline edge3Polyline =
GeometryFactory.CreatePolyline(
GeometryFactory.CreatePoint(2600020, 1200010, 452, double.NaN, sr),
GeometryFactory.CreatePoint(2600030, 1200015, 450, double.NaN, sr));
IFeature thirdEdge = CreateInOperation(
() => CreateFeature(edgeClass, edge3Polyline), observer);
// Now merge features 1 and 2:
MergeInOperation(existingFeature, thirdEdge, observer);
Assert.AreEqual(1, observer.GetUpdatedInLastOperation().Count());
// Make sure the second edge has not changed:
Assert.IsTrue(GeometryUtils.AreEqual(edge2PolylineOrig, secondEdge.Shape));
}