private void ConfBtn_Click(object sender, EventArgs e)
{
if (nodeinfolist.Items.Count > 0)
{
if (DestNodeBox.Text == "")
{
return;
}
int nodenum = nodeinfolist.Items.Count;
int[] dat = new int[1];
SourceDataClass.InitForPack(nodenum * 115 + 6 + 20);
dat[0] = 2;
SourceDataClass.OutPutIntBit(dat, 8);
dat[0] = nodenum * 115 + 6 + 20;
SourceDataClass.OutPutIntBit(dat, 12);
dat[0] = nodenum;
SourceDataClass.OutPutIntBit(dat, 6);//节点数
foreach (string nodename in NodeInfo.Keys)
{
SourceDataClass.OutPutArrayBit((BitArray)NodeInfo[nodename]);
}
//加入列表
MainForm.pMainForm.comlistwin.AddCmd("节点" + DestNodeBox.Text.TrimStart('节', '点'), "节点信息表", SourceDataClass.packdata);
MainForm.pMainForm.RefreshListStat();
MessageBox.Show("节点信息表已加入命令列表!");
DialogResult = DialogResult.OK;
}
else
{
MessageBox.Show("尚未添加任何节点信息!");
DialogResult = DialogResult.Ignore;
}
}
private void AddToList_Click(object sender, EventArgs e)
{
if (DestNodeName.Text == "")
{
return;
}
int[] dat = new int[1];
SourceDataClass.clear();
SourceDataClass.InitForPack(20 + 16);
dat[0] = 142;
SourceDataClass.OutPutIntBit(dat, 8);
dat[0] = 36;
SourceDataClass.OutPutIntBit(dat, 12);
BitArray a = new BitArray(16);
for (int i = 0; i < 16; i++)
{
a[i] = CommType.GetItemChecked(i);
}
SourceDataClass.OutPutArrayBit(a);
//加入列表
MainForm.pMainForm.comlistwin.AddCmd(DestNodeName.Text, "通信制式开关", SourceDataClass.packdata);
MainForm.pMainForm.RefreshListStat();
MessageBox.Show("通信制式开关命令已加入命令列表!");
}
//打包所有数据区到未加0xAA为止，将有相同目的地址的数据打包在一个块中
private byte[] pack()
{
NodeFindOut.Clear();
CmdTable.Clear(); //每次打包前清空。
int total = 0; //数据总长度，不包括包头
for (int i = 0; i < CmdNode.Count; i++)
{
if (CmdTable.ContainsKey(CmdNode[i]))
{
BitArray ba = (BitArray)CmdTable[CmdNode[i]];//取出已有的数据
BitArray newba = new BitArray(ba.Length + CmdForSend[i].Length);
for (int a = 0; a < ba.Length; a++)
{
newba[a] = ba[a];
}
for (int j = 0; j < CmdForSend[i].Length; j++)
{
newba[ba.Length + j] = CmdForSend[i][j];
}
CmdTable[CmdNode[i]] = newba;//将新的数据放进哈希表
}
else
{
CmdTable.Add(CmdNode[i], CmdForSend[i]);
NodeFindOut.Add(CmdNode[i]);
}
total += CmdForSend[i].Length;
}
//打包协议
int blocknum = CmdTable.Keys.Count;//块数
total += blocknum * 34 + 6;
SourceDataClass.InitForPack(total);
int[] b = new int[1];
b[0] = blocknum;
SourceDataClass.OutPutIntBit(b, 6);
for (int i = 0; i < blocknum; i++)
{
BitArray ba = (BitArray)CmdTable[NodeFindOut[i]];//数据区集合
int blocklen = ba.Length + 34;
BitArray blockba = new BitArray(blocklen);
b[0] = PackageIndex;
PackageIndex++;
SourceDataClass.OutPutIntBit(b, 10);
b[0] = blocklen;
SourceDataClass.OutPutIntBit(b, 12);
b[0] = int.Parse(SourceNodeBox.Text.TrimStart('节', '点'));
SourceDataClass.OutPutIntBit(b, 6);
b[0] = int.Parse(NodeFindOut[i].TrimStart('节', '点'));
SourceDataClass.OutPutIntBit(b, 6);
SourceDataClass.OutPutArrayBit(ba);
}
byte[] cmd = new byte[(int)Math.Ceiling(((double)total) / 8)];
SourceDataClass.packdata.CopyTo(cmd, 0);
return(cmd);
}
private byte[] Pack()
{
//打包协议
try
{
//路径安排
if (PathAsignCheck.Checked)
{
if (Path.Text == "")
{
PathAsignCheck.Checked = false;
throw new Exception("路径安排不能为空");
}
string[] nodename = Path.Text.Split(' ', ',');
int[] dat = new int[1];
int nodenum = nodename.Length;
SourceDataClass.InitForPack(nodenum * 6 + 20);
dat[0] = 8;
SourceDataClass.OutPutIntBit(dat, 8);
dat[0] = nodenum * 6 + 20;
SourceDataClass.OutPutIntBit(dat, 12);
for (int i = 0; i < nodenum; i++)
{
dat[0] = int.Parse(nodename[i]);
SourceDataClass.OutPutIntBit(dat, 6);//节点
}
BitArray ba = SourceDataClass.packdata;
balst.Add(ba);
}
//
byte[] bstr = System.Text.Encoding.Default.GetBytes(SourceText.Text);
BitArray bta = new BitArray(bstr);
SourceDataClass.InitForPack(bta.Length + 20);
int[] b = new int[1];
b[0] = 101;
SourceDataClass.OutPutIntBit(b, 8);
b[0] = bta.Length + 20;
SourceDataClass.OutPutIntBit(b, 12);
SourceDataClass.OutPutArrayBit(bta);
balst.Add(SourceDataClass.packdata);
int blocklen = 34 + 6;//
if (balst.Count > 0)
{
for (int i = 0; i < balst.Count; i++)
{
blocklen += balst[i].Length;
}
}
SourceDataClass.InitForPack(blocklen);
b[0] = 1;
SourceDataClass.OutPutIntBit(b, 6);
BitArray blockba = new BitArray(blocklen);
b[0] = ComListForm.PackageIndex;
ComListForm.PackageIndex++;
SourceDataClass.OutPutIntBit(b, 10);
b[0] = blocklen - 6;//仅包括块头定义,块长度不包括块数长度
SourceDataClass.OutPutIntBit(b, 12);
b[0] = int.Parse(SourceNodeBox.Text.TrimStart('节', '点'));
SourceDataClass.OutPutIntBit(b, 6);
b[0] = int.Parse(DestNodeName.Text.TrimStart('节', '点'));
SourceDataClass.OutPutIntBit(b, 6);
for (int i = 0; i < balst.Count; i++)
{
SourceDataClass.OutPutArrayBit(balst[i]);
}
balst.Clear();
byte[] cmd = new byte[(int)Math.Ceiling(((double)blocklen) / 8)];
SourceDataClass.packdata.CopyTo(cmd, 0);
//BinaryWriter bw = new BinaryWriter(new FileStream("ping.dat", FileMode.Create));
//bw.Write(cmd);
//bw.Close();
return(cmd);
}
catch (Exception MyEx)
{
balst.Clear();
MessageBox.Show(MyEx.Message);
return(new byte[0]);
}
}
//将信息加入下面的列表
private void AddBtn_Click(object sender, EventArgs e)
{
if (NodeNameBox.Text == "")
{
return;
}
try
{
int[] dat = new int[1];
SourceDataClass.clear();
SourceDataClass.InitForPack(115);
dat[0] = int.Parse(NodeNameBox.Text.TrimStart('节', '点'));
SourceDataClass.OutPutIntBit(dat, 6);
dat[0] = Nodetypebox.Text == "静态节点" ? 0 : 1;
SourceDataClass.OutPutIntBit(dat, 1);
dat[0] = int.Parse(EmitSet.Text);
SourceDataClass.OutPutIntBit(dat, 3);
dat[0] = Convert.ToInt32(Enum.Parse(typeof(SourceDataClass.DeviceAddr), Set1Box.Text));
SourceDataClass.OutPutIntBit(dat, 8);
dat[0] = Convert.ToInt32(Enum.Parse(typeof(SourceDataClass.DeviceAddr), Set2Box.Text));
SourceDataClass.OutPutIntBit(dat, 8);
int energy = int.Parse(leftenergy.Text);
if (energy < 5)
{
dat[0] = 0;
}
else if ((energy >= 5) && (energy < 20))
{
dat[0] = 1;
}
else if ((energy >= 20) && (energy < 35))
{
dat[0] = 2;
}
else if ((energy >= 35) && (energy < 50))
{
dat[0] = 3;
}
else if ((energy >= 50) && (energy < 65))
{
dat[0] = 4;
}
else if ((energy >= 65) && (energy < 80))
{
dat[0] = 5;
}
else if ((energy >= 80) && (energy < 95))
{
dat[0] = 6;
}
else if ((energy >= 95))
{
dat[0] = 7;
}
SourceDataClass.OutPutIntBit(dat, 3);
BitArray a = new BitArray(16);
for (int i = 0; i < 16; i++)
{
a[i] = CommType.GetItemChecked(i);
}
SourceDataClass.OutPutArrayBit(a);
if (Lang.Value < 0)
{
dat[0] = 0x8ffffff + (int)((double)Math.Abs(Lang.Value) * 60 * 10000);
}
else
{
dat[0] = (int)((double)Math.Abs(Lang.Value) * 60 * 10000);
}
SourceDataClass.OutPutIntBit(dat, 28);
if (Lat.Value < 0)
{
dat[0] = 0x8ffffff + (int)((double)Math.Abs(Lat.Value) * 60 * 10000);
}
else
{
dat[0] = (int)((double)Math.Abs(Lat.Value) * 60 * 10000);
}
SourceDataClass.OutPutIntBit(dat, 28);
dat[0] = (int)(DepthInput.Value / 0.5);
SourceDataClass.OutPutIntBit(dat, 14);
if (NodeInfo.ContainsKey(NodeNameBox.Text))
{
NodeInfo.Remove(NodeNameBox.Text);
}
//加入hash表
NodeInfo.Add(NodeNameBox.Text, SourceDataClass.packdata);
//替换之前的记录
string log = ParseDataAndDisplay((BitArray)NodeInfo[NodeNameBox.Text], false);
if (nodeinfolist.Items.Count == 0)//第一条记录
{
nodeinfolist.Items.Add(log);
}
for (int i = 0; i < nodeinfolist.Items.Count; i++)
{
if (CheckListNodeName(i, NodeNameBox.Text))
{
nodeinfolist.Items[i] = log;
break;
}
if (i == nodeinfolist.Items.Count - 1)//最后一项也比过了，说明当前列表中没有
{
nodeinfolist.Items.Add(log);
}
}
SourceDataClass.clear();
}
catch (Exception ex)
{
SourceDataClass.clear();
MessageBox.Show(ex.Message);
}
}