public string Build(int type, Vector2 spigotSize, int materialID) // должен возвращать лист с путями к файлам
{
Dictionary <string, string> dictionary = new Dictionary <string, string>();
long tempId = 0;
List <long> idObjWithNewPath = new List <long>();
DataSet ds = null;
//DataTable dt = ipsModuleObject.GetIMBASETable((long)IMBASE_TablesID.Spigot, out ds, out dictionary);
base.PartPrototypeName = GetPrototypeName((SpigotType_e)type);
string drawingNameWithExt = "12-00.SLDDRW";
int addDimH = base.PartPrototypeName == "12-30" ? 10 : 1;
string drawingSpigotPath = Path.Combine(RootFolder, SourceFolder, drawingNameWithExt);
SolidWorksAdapter.OpenDocument(drawingSpigotPath, swDocumentTypes_e.swDocDRAWING);
SolidWorksDocument = SolidWorksAdapter.AcativeteDoc(base.AssemblyName + ".SLDASM");
SolidWorksAdapter.ToAssemblyDocument(SolidWorksDocument);
DeleteEquations(base.PartPrototypeName);
DeleteComponents(type);
SolidWorksDocument.ForceRebuild3(true);
#region formuls
double w = spigotSize.X;
double h = spigotSize.Y - addDimH;
const double step = 50;
double weldWidth = Math.Truncate(spigotSize.X / step) * 1000 + 1;
double weldHeight = Math.Truncate(spigotSize.Y / step) * 1000 + 1;
#endregion
if (base.PartPrototypeName == "12-20")
{
#region 12-20
base.PartName = $"12-20-{spigotSize.Y}";
//if (ipsModuleObject.CheckForSimilarRows(base.PartName, dt, dictionary))// добавить out filePath
//{
// // открывать детальку
// SolidWorksDocument.Extension.SelectByID2("12-20-001-1@12-00", "COMPONENT", 0, 0, 0, false, 0, null, 0);
// AssemblyDocument.ReplaceComponents(base.NewPartPath, "", true, true);
//}
//else
//{
base.NewPartPath = Path.Combine(RootFolder, SubjectDestinationFolder, base.PartName);
base.parameters.Add("D1@Вытянуть1", h - 31);
base.parameters.Add("D1@Кривая1", weldHeight);
EditPartParameters("12-20-001", base.NewPartPath, materialID);
//tempId = op.WriteIntoIMBASE_Spigot_Table(dt, base.NewPartPath + ".SLDPRT", "Обозначениеttt", base.PartName, spigotSize.X.ToString(), spigotSize.Y.ToString(), type.ToString(), 1);
//ComponentsPathList.Add(base.NewPartPath);
idObjWithNewPath.Add(tempId);
//}
//12-20-002
base.PartName = $"12-20-{spigotSize.X}";
//if (ipsModuleObject.CheckForSimilarRows(base.PartName, dt, dictionary))
//{
// //открывать детальку
//}
//else
//{
base.NewPartPath = Path.Combine(RootFolder, SubjectDestinationFolder, base.PartName);
base.parameters.Add("D1@Вытянуть1", w - 31);
base.parameters.Add("D1@Кривая1", weldWidth);
EditPartParameters("12-20-002", base.NewPartPath, materialID);
// tempId = op.WriteIntoIMBASE_Spigot_Table(dt, base.NewPartPath + ".SLDPRT", "Обозначениеttt", base.PartName, spigotSize.X.ToString(), spigotSize.Y.ToString(), type.ToString(), 1);
//ComponentsPathList.Add(base.NewPartPath);
//Part=1296
//Изделие=1052
idObjWithNewPath.Add(tempId);
//}
//12-003
base.PartName = $"12-03-{spigotSize.X}-{spigotSize.Y}";
//if (ipsModuleObject.CheckForSimilarRows(base.PartName, dt, dictionary))
//{
// //открывать детальку
//}
//else
//{
base.NewPartPath = Path.Combine(RootFolder, SubjectDestinationFolder, base.PartName);
base.parameters.Add("D3@Эскиз1", w);
base.parameters.Add("D2@Эскиз1", h);
EditPartParameters("12-003", base.NewPartPath, materialID);
// tempId = op.WriteIntoIMBASE_Spigot_Table(dt, base.NewPartPath + ".SLDPRT", "Обозначениеttt", base.PartName, spigotSize.X.ToString(), spigotSize.Y.ToString(), type.ToString(), 1);
//ComponentsPathList.Add(base.NewPartPath);
idObjWithNewPath.Add(tempId);
//}
#endregion
}
else if (base.PartPrototypeName == "12-30")
{
#region 12-30
//12-30-001
base.PartName = $"12-30-{spigotSize.Y}";
//if (CheckExistPart != null)
//{
// CheckExistPart(base.PartName, RootFolder, out base.NewPartPath);
//}
//else
//{
// MessageObserver.Instance.SetMessage("CheckExistPartEvent can not be null", MessageType.Warning);
//}
//if (NewPartPath != string.Empty && NewPartPath != null)
//{
// SolidWorksDocument.Extension.SelectByID2("12-30-001-1@12-00", "COMPONENT", 0, 0, 0, false, 0, null, 0);
// AssemblyDocument.ReplaceComponents(base.NewPartPath, "", true, true);
//}
//else
//{
base.NewPartPath = Path.Combine(RootFolder, SubjectDestinationFolder, base.PartName);
base.parameters.Add("D1@Вытянуть1", h - 31);
base.parameters.Add("D1@Кривая1", weldHeight);
//base.parameters.Add("D5@Эскиз1", weldHeight);
EditPartParameters("12-30-001", base.NewPartPath, materialID);
ComponentsPathList.Add(base.NewPartPath);
//}
//12-30-002
base.PartName = $"12-30-{spigotSize.X}";
//if (CheckExistPart != null)
//{
// CheckExistPart(base.PartName, RootFolder, out base.NewPartPath);
//}
//else
//{
// MessageObserver.Instance.SetMessage("CheckExistPartEvent can not be null", MessageType.Warning);
//}
//if (NewPartPath != string.Empty && NewPartPath != null)
//{
// SolidWorksDocument.Extension.SelectByID2("12-30-002-1@12-00", "COMPONENT", 0, 0, 0, false, 0, null, 0);
// AssemblyDocument.ReplaceComponents(base.NewPartPath, "", true, true);
//}
//else
//{
base.NewPartPath = Path.Combine(RootFolder, SubjectDestinationFolder, base.PartName);
base.parameters.Add("D1@Вытянуть1", w - 31);
base.parameters.Add("D1@Кривая1", weldHeight);
EditPartParameters("12-30-002", base.NewPartPath, materialID);
ComponentsPathList.Add(base.NewPartPath);
//}
//12-003
base.PartName = $"12-03-{spigotSize.X}-{spigotSize.Y}";
//if (CheckExistPart != null)
//{
// CheckExistPart(base.PartName, RootFolder, out base.NewPartPath);
//}
//else
//{
// MessageObserver.Instance.SetMessage("CheckExistPartEvent can not be null", MessageType.Warning);
//}
//if (NewPartPath != string.Empty && NewPartPath != null)
//{
// SolidWorksDocument.Extension.SelectByID2("12-003-2@12-00", "COMPONENT", 0, 0, 0, false, 0, null, 0);
// AssemblyDocument.ReplaceComponents(base.NewPartPath, "", true, true);
//}
//else
//{
base.NewPartPath = Path.Combine(RootFolder, SubjectDestinationFolder, base.PartName);
base.parameters.Add("D3@Эскиз1", w);
base.parameters.Add("D2@Эскиз1", h);
EditPartParameters("12-003", base.NewPartPath, materialID);
ComponentsPathList.Add(base.NewPartPath);
//}
#endregion
}
SolidWorksDocument = SolidWorksAdapter.AcativeteDoc(base.AssemblyName + ".SLDASM");
SolidWorksDocument.ForceRebuild3(true);
NewPartPath = Path.Combine(RootFolder, SubjectDestinationFolder, GetSpigotName((SpigotType_e)type, spigotSize));
SolidWorksDocument.Extension.SaveAs(NewPartPath + ".SLDASM", (int)swSaveAsVersion_e.swSaveAsCurrentVersion, (int)swSaveAsOptions_e.swSaveAsOptions_Silent, null, ref error, ref warning);
InitiatorSaveExeption(error, warning, NewPartPath + ".SLDASM");
SolidWorksAdapter.SldWoksAppExemplare.CloseDoc(base.NewPartPath + ".SLDASM");
//tempId = op.WriteIntoIMBASE_Spigot_Table(dt, base.AssemblyName + ".SLDASM", "ОбозначениеСборка", base.PartName, spigotSize.X.ToString(), spigotSize.Y.ToString(), type.ToString(), 1);
SolidWorksDocument = SolidWorksAdapter.AcativeteDoc(drawingNameWithExt);
SolidWorksDRW = SolidWorksAdapter.ToDrawingDoc(SolidWorksDocument);
base.SolidWorksDRW.ActivateSheet("DRW1");
SolidWorksDRW.SetupSheet5("DRW1", 12, 12, 1, GetDrawingScale(spigotSize), true, @"\\pdmsrv\SolidWorks Admin\Templates\Основные надписи\A3-A-1.slddrt", 0.42, 0.297, "По умолчанию", false);
SolidWorksDocument.Extension.SaveAs(NewPartPath + ".SLDDRW", (int)swSaveAsVersion_e.swSaveAsCurrentVersion, (int)swSaveAsOptions_e.swSaveAsOptions_Silent, null, ref error, ref warning);
InitiatorSaveExeption(error, warning, NewPartPath + ".SLDDRW");
// create relations between docs
//ipsModuleObject.MakeRelationsBtwnDocs(idObjWithNewPath, tempId);
SolidWorksAdapter.CloseAllDocumentsAndExit();
return(NewPartPath);
}
public string Build(SpigotType_e type, int width, int height)
{
string modelName = GetModelName(type);
NewSpigotName = GetSpigotName(type, width, height);
Dimension dimension;
int addDimH = modelName == "12-30" ? 10 : 1;
string newSpigotPath = $@"{RootFolder}{SubjectDestinationFolder}\{NewSpigotName}";
string drawingName = modelName == "12-30" ? modelName : "12-00";
var modelSpigotDrw = $@"{RootFolder}{SourceFolder}\{drawingName}.SLDDRW";
ModelDoc2 swDrawingSpigot = SolidWorksAdapter.OpenDocument(modelSpigotDrw, swDocumentTypes_e.swDocDRAWING);
solidWorksDocument = SolidWorksAdapter.AcativeteDoc("12-00");
AssemblyDoc assemblyDocument = (AssemblyDoc)solidWorksDocument;
assemblyDocument.ResolveAllLightWeightComponents(false);
DeleteEquations(modelName);
solidWorksDocument.ForceRebuild3(true);
#region formuls
var w = (Convert.ToDouble(width) - 1) / 1000; // ????????????
var h = Convert.ToDouble((Convert.ToDouble(height) + addDimH) / 1000); // ????????????
const double step = 50;
var weldWidth = Convert.ToDouble((Math.Truncate(Convert.ToDouble(width) / step) + 1)); // ????????????
var weldHeight = Convert.ToDouble((Math.Truncate(Convert.ToDouble(height) / step) + 1)); // ????????????
#endregion
DeleteComponents((int)type);
if (modelName == "12-20")
{
PartName = $"12-20-{height}.SLDPRT";
if (CheckExistPart != null)
{
CheckExistPart(PartName, out IsPartExist, out NewPartPath);
}
else
{
MessageObserver.Instance.SetMessage("CheckExistPartEvent can not be null", MessageType.Warning);
}
if (IsPartExist)
{
solidWorksDocument.Extension.SelectByID2("12-20-001-1@12-00", "COMPONENT", 0, 0, 0, false, 0, null, 0);
assemblyDocument.ReplaceComponents(NewPartPath, "", true, true);
}
else
{
NewPartPath = $@"{RootFolder}\{SubjectDestinationFolder}\{NewPartPath}";
solidWorksDocument.Extension.SelectByID2("D1@Вытянуть1@12-20-001-1@12-00", "DIMENSION", 0, 0, 0, false, 0, null, 0);
dimension = ((Dimension)(solidWorksDocument.Parameter("D1@Вытянуть[email protected]")));
dimension.SystemValue = h - 0.031;
solidWorksDocument.Extension.SelectByID2("D1@Кривая1@12-20-001-1@12-00", "DIMENSION", 0, 0, 0, false, 0, null, 0);
dimension = ((Dimension)(solidWorksDocument.Parameter("D1@Кривая[email protected]")));
dimension.SystemValue = weldHeight;
SolidWorksDocument.Extension.SaveAs(NewPartPath, (int)swSaveAsVersion_e.swSaveAsCurrentVersion, (int)swSaveAsOptions_e.swSaveAsOptions_Silent, null, ref error, ref warning);
InitiatorSaveExeption(error, warning, NewPartPath);
ComponentsPathList.Add(NewPartPath);
SolidWorksAdapter.SldWoksAppExemplare.CloseDoc(NewPartPath);
}
//12-20-002
PartName = $"12-20-{width}.SLDPRT";
MessageObserver.Instance.SetMessage("Check exist part. " + NewPartPath);
if (CheckExistPart != null)
{
MessageObserver.Instance.SetMessage("\tCheckExistPartEvent");
CheckExistPart(PartName, out IsPartExist, out NewPartPath);
}
else
{
MessageObserver.Instance.SetMessage("CheckExistPartEvent can not be null", MessageType.Warning);
}
if (IsPartExist)
{
solidWorksDocument.Extension.SelectByID2("12-20-002-1@12-00", "COMPONENT", 0, 0, 0, false, 0, null, 0);
assemblyDocument.ReplaceComponents(PartName, "", true, true);
}
else
{
NewPartPath = $@"{RootFolder}\{SubjectDestinationFolder}\{NewPartPath}";
solidWorksDocument.Extension.SelectByID2("D1@Вытянуть1@12-20-002-1@12-00", "DIMENSION", 0, 0, 0, false, 0, null, 0);
dimension = ((Dimension)(solidWorksDocument.Parameter("D1@Вытянуть[email protected]")));
dimension.SystemValue = w - 0.031;
solidWorksDocument.Extension.SelectByID2("D1@Кривая1@12-20-002-1@12-00", "DIMENSION", 0, 0, 0, false, 0, null, 0);
dimension = ((Dimension)(solidWorksDocument.Parameter("D1@Кривая[email protected]")));
dimension.SystemValue = weldWidth;
SolidWorksDocument.Extension.SaveAs(NewPartPath, (int)swSaveAsVersion_e.swSaveAsCurrentVersion, (int)swSaveAsOptions_e.swSaveAsOptions_Silent, null, ref error, ref warning);
InitiatorSaveExeption(error, warning, NewPartPath);
ComponentsPathList.Add(NewPartPath);
}
//12-003
PartName = $"12-03-{width}-{height}.SLDPRT";
if (CheckExistPart != null)
{
CheckExistPart(PartName, out IsPartExist, out NewPartPath);
}
else
{
MessageObserver.Instance.SetMessage("CheckExistPartEvent can not be null", MessageType.Warning);
}
if (IsPartExist)
{
solidWorksDocument.Extension.SelectByID2("12-003-1@12-00", "COMPONENT", 0, 0, 0, false, 0, null, 0);
assemblyDocument.ReplaceComponents(PartName, "", true, true);
}
else
{
NewPartPath = $@"{RootFolder}\{SubjectDestinationFolder}\{NewPartPath}";
solidWorksDocument.Extension.SelectByID2("D3@Эскиз1@12-003-1@12-00", "DIMENSION", 0, 0, 0, false, 0, null, 0);
dimension = ((Dimension)(solidWorksDocument.Parameter("D3@Эскиз[email protected]")));
dimension.SystemValue = w;
solidWorksDocument.Extension.SelectByID2("D2@Эскиз1@12-003-1@12-00", "DIMENSION", 0, 0, 0, false, 0, null, 0);
dimension = ((Dimension)(solidWorksDocument.Parameter("D2@Эскиз[email protected]")));
dimension.SystemValue = h;
solidWorksDocument.EditRebuild3();
SolidWorksDocument.Extension.SaveAs(NewPartPath, (int)swSaveAsVersion_e.swSaveAsCurrentVersion, (int)swSaveAsOptions_e.swSaveAsOptions_Silent, null, ref error, ref warning);
InitiatorSaveExeption(error, warning, NewPartPath);
ComponentsPathList.Add(NewPartPath);
SolidWorksAdapter.SldWoksAppExemplare.CloseDoc(NewPartPath);
}
}
if (modelName == "12-30")
{
//12-30-001
PartName = $"12-30-{height}.SLDPRT";
MessageObserver.Instance.SetMessage("Check exist part. " + NewPartPath);
if (CheckExistPart != null)
{
CheckExistPart(PartName, out IsPartExist, out NewPartPath);
}
else
{
MessageObserver.Instance.SetMessage("CheckExistPartEvent can not be null", MessageType.Warning);
}
if (IsPartExist)
{
solidWorksDocument.Extension.SelectByID2("12-30-001-1@12-00", "COMPONENT", 0, 0, 0, false, 0, null, 0);
assemblyDocument.ReplaceComponents(PartName, "", true, true);
}
else
{
NewPartPath = $@"{RootFolder}\{SubjectDestinationFolder}\{NewPartPath}";
solidWorksDocument.Extension.SelectByID2("D1@Вытянуть1@12-30-001-1@12-00", "DIMENSION", 0, 0, 0, false, 0, null, 0);
dimension = ((Dimension)(solidWorksDocument.Parameter("D1@Вытянуть[email protected]")));
dimension.SystemValue = h - 0.031;
solidWorksDocument.Extension.SelectByID2("D1@Кривая1@12-30-001-1@12-00", "DIMENSION", 0, 0, 0, false, 0, null, 0);
dimension = ((Dimension)(solidWorksDocument.Parameter("D1@Кривая[email protected]")));
dimension.SystemValue = weldHeight;
SolidWorksDocument.Extension.SaveAs(NewPartPath, (int)swSaveAsVersion_e.swSaveAsCurrentVersion, (int)swSaveAsOptions_e.swSaveAsOptions_Silent, null, ref error, ref warning);
InitiatorSaveExeption(error, warning, NewPartPath);
ComponentsPathList.Add(NewPartPath);
}
//12-30-002
PartName = $"12-30-{width}.SLDPRT";
if (CheckExistPart != null)
{
CheckExistPart(PartName, out IsPartExist, out NewPartPath);
}
else
{
MessageObserver.Instance.SetMessage("CheckExistPartEvent can not be null", MessageType.Warning);
}
if (IsPartExist)
{
solidWorksDocument.Extension.SelectByID2("12-30-002-1@12-00", "COMPONENT", 0, 0, 0, false, 0, null, 0);
assemblyDocument.ReplaceComponents(PartName, "", true, true);
}
else
{
NewPartPath = $@"{RootFolder}\{SubjectDestinationFolder}\{NewPartPath}";
solidWorksDocument.Extension.SelectByID2("D1@Вытянуть1@12-30-002-1@12-00", "DIMENSION", 0, 0, 0, false, 0, null, 0);
dimension = ((Dimension)(solidWorksDocument.Parameter("D1@Вытянуть[email protected]")));
dimension.SystemValue = w - 0.031;
solidWorksDocument.Extension.SelectByID2("D1@Кривая1@12-30-002-1@12-00", "DIMENSION", 0, 0, 0, false, 0, null, 0);
dimension = ((Dimension)(solidWorksDocument.Parameter("D1@Кривая[email protected]")));
dimension.SystemValue = weldHeight;
SolidWorksDocument.Extension.SaveAs(NewPartPath, (int)swSaveAsVersion_e.swSaveAsCurrentVersion, (int)swSaveAsOptions_e.swSaveAsOptions_Silent, null, ref error, ref warning);
InitiatorSaveExeption(error, warning, NewPartPath);
ComponentsPathList.Add(NewPartPath);
}
//12-003
PartName = $"12-03-{width}-{height}.SLDPRT";
if (CheckExistPart != null)
{
CheckExistPart(PartName, out IsPartExist, out NewPartPath);
}
else
{
MessageObserver.Instance.SetMessage("CheckExistPartEvent can not be null", MessageType.Warning);
}
if (IsPartExist)
{
solidWorksDocument.Extension.SelectByID2("12-003-2@12-00", "COMPONENT", 0, 0, 0, false, 0, null, 0);
assemblyDocument.ReplaceComponents(PartName, "", true, true);
}
else
{
NewPartPath = $@"{RootFolder}\{SubjectDestinationFolder}\{NewPartPath}";
solidWorksDocument.Extension.SelectByID2("D3@Эскиз1@12-003-2@12-00", "DIMENSION", 0, 0, 0, false, 0, null, 0);
dimension = ((Dimension)(solidWorksDocument.Parameter("D3@Эскиз[email protected]")));
dimension.SystemValue = w;
solidWorksDocument.Extension.SelectByID2("D2@Эскиз1@12-003-2@12-00", "DIMENSION", 0, 0, 0, false, 0, null, 0);
dimension = ((Dimension)(solidWorksDocument.Parameter("D2@Эскиз[email protected]")));
dimension.SystemValue = h;
solidWorksDocument.EditRebuild3();
SolidWorksDocument.Extension.SaveAs(NewPartPath, (int)swSaveAsVersion_e.swSaveAsCurrentVersion, (int)swSaveAsOptions_e.swSaveAsOptions_Silent, null, ref error, ref warning);
InitiatorSaveExeption(error, warning, NewPartPath);
ComponentsPathList.Add(NewPartPath);
}
}
solidWorksDocument.ForceRebuild3(true);
solidWorksDocument.Extension.SaveAs(newSpigotPath + ".SLDASM", (int)swSaveAsVersion_e.swSaveAsCurrentVersion, (int)swSaveAsOptions_e.swSaveAsOptions_Silent, null, ref error, ref warning);
InitiatorSaveExeption(error, warning, newSpigotPath + ".SLDASM");
SolidWorksAdapter.SldWoksAppExemplare.CloseDoc(NewSpigotName + ".SLDASM");
ComponentsPathList.Add(newSpigotPath + ".SLDASM");
swDrawingSpigot.Extension.SelectByID2("DRW1", "SHEET", 0, 0, 0, false, 0, null, 0);
var drw = (DrawingDoc)SolidWorksAdapter.AcativeteDoc(drawingName + ".SLDDRW");
drw.ActivateSheet("DRW1");
drw.SetupSheet5("DRW1", 12, 12, 1, GetDrawingScale(width, height), true, @"\\pdmsrv\SolidWorks Admin\Templates\Основные надписи\A3-A-1.slddrt", 0.42, 0.297, "По умолчанию", false);
swDrawingSpigot.Extension.SaveAs(newSpigotPath + ".SLDDRW", (int)swSaveAsVersion_e.swSaveAsCurrentVersion, (int)swSaveAsOptions_e.swSaveAsOptions_Silent, null, ref error, ref warning);
InitiatorSaveExeption(error, warning, newSpigotPath + ".SLDDRW");
ComponentsPathList.Add(newSpigotPath + ".SLDDRW");
SolidWorksAdapter.CloseAllDocumentsAndExit();
return(newSpigotPath);
}
public string Build(RoofType_e type, int width, int lenght, bool onlyPath)
{
string newPartPath = string.Empty;
string modelName;
switch (type)
{
case RoofType_e.One:
case RoofType_e.Two:
case RoofType_e.Three:
case RoofType_e.Four:
case RoofType_e.Five:
case RoofType_e.Six:
modelName = "15-000";
break;
default:
modelName = "15-000";
break;
}
string newRoofName = "15-0" + type + "-" + width + "-" + lenght;
string newRoofPath = $@"{RootFolder}{SubjectDestinationFolder}\{newRoofName}.SLDASM";
bool IsExistPart = false;
CheckExistPart(newRoofName + ".SLDASM", out IsExistPart, out newRoofPath);
var modelRoofPath = $@"{RootFolder}{SourceFolder}\{modelName}.SLDASM";
solidWorksDocument = SolidWorksAdapter.SldWoksAppExemplare.OpenDoc6(modelRoofPath, (int)swDocumentTypes_e.swDocASSEMBLY,
(int)swOpenDocOptions_e.swOpenDocOptions_LoadModel + (int)swOpenDocOptions_e.swOpenDocOptions_Silent, "00", 0, 0);
AssemblyDoc solidWorcsAssemvlyDocyment = (AssemblyDoc)solidWorksDocument;
solidWorcsAssemvlyDocyment.ResolveAllLightWeightComponents(false);
DeleteComponents((int)type);
#region Сохранение и изменение элементов
var addwidth = 100;
var addwidth2 = 75;
var type4 = 0;
var divwidth = 1;
if (type == RoofType_e.Two || type == RoofType_e.Six)
{
addwidth = 75;
divwidth = 2;
}
if (type == RoofType_e.Four)
{
type4 = 170;
addwidth2 = 170 + 75;
}
var widthD = (Convert.ToDouble(width) / divwidth + addwidth);
var lengthD = (Convert.ToDouble(lenght) - 28.5);
const double step = 200;
const double step2 = 150;
var weldW = Convert.ToDouble((Math.Truncate(Convert.ToDouble(lenght) / step) + 1));
var weldW2 = Convert.ToDouble((Math.Truncate(Convert.ToDouble(lenght) / step2) + 1));
var newComponents = new List <FileInfo>();
//15-001
SolidWorksAdapter.SldWoksAppExemplare.IActivateDoc2("15-001", true, 0);
var newPartName = $"15-0{type}-01-{width}-{lenght}";
CheckExistPart(newPartName, out IsExistPart, out newPartPath);
if (IsExistPart)
{
solidWorksDocument = ((ModelDoc2)(SolidWorksAdapter.SldWoksAppExemplare.ActivateDoc2("15-000.SLDASM", true, 0)));
solidWorksDocument.Extension.SelectByID2("15-001-1@15-000", "COMPONENT", 0, 0, 0, false, 0, null, 0);
solidWorcsAssemvlyDocyment.ReplaceComponents(newPartPath, "", true, true);
SolidWorksAdapter.SldWoksAppExemplare.CloseDoc("15-001.SLDPRT");
}
else
{
newPartPath = $@"{SourceFolder}\{SubjectDestinationFolder}\{newPartName}.SLDPRT";
//EditPartParameters("15-001",
// $@"{RootFolder}\{SubjectDestinationFolder}\{newPartName}",
// new[,]
// {
// {"D1@Эскиз1", type == RoofType.Five || type == RoofType.Six ? Convert.ToString(140 + lengthD + type4) : Convert.ToString(lengthD + type4)},
// {"D2@Эскиз1", Convert.ToString(widthD)},
// {"D4@Эскиз27", Convert.ToString(addwidth2-4.62)},
// {"D1@Эскиз27", Convert.ToString(90)},
// {"D2@Эскиз27", Convert.ToString((75-4.62))},
// {"D1@Эскиз24", type == RoofType.Five || type == RoofType.Six? Convert.ToString(149.53) : Convert.ToString(9.53)},
// {"D1@Кривая2", Convert.ToString(weldW2*1000)},
// {"D1@Кривая1", Convert.ToString(weldW*1000)}
// } );
try
{
VentsMatdll(new[] { "1700" }, new[] { "", "Шаргень", "2" }, newPartName);
}
catch (Exception e)
{
Patterns.Observer.MessageObserver.Instance.SetMessage(e.ToString());
}
SolidWorksAdapter.SldWoksAppExemplare.CloseDoc(newPartName);
}
//15-002
if (type == RoofType_e.Six)
{
try
{
SolidWorksAdapter.SldWoksAppExemplare.IActivateDoc2("15-002", true, 0);
newPartName = $"15-0{type}-02-{width}-{lenght}";
CheckExistPart(newPartName, out IsExistPart, out newPartPath);
if (IsExistPart)
{
solidWorksDocument = ((ModelDoc2)(SolidWorksAdapter.SldWoksAppExemplare.ActivateDoc2("15-000.SLDASM", true, 0)));
solidWorksDocument.Extension.SelectByID2("15-002-1@15-000", "COMPONENT", 0, 0, 0, false, 0, null, 0);
solidWorcsAssemvlyDocyment.ReplaceComponents(newPartPath, "", true, true);
SolidWorksAdapter.SldWoksAppExemplare.CloseDoc("15-002.SLDPRT");
}
else
{
newPartPath =
$@"{RootFolder}\{SubjectDestinationFolder}\{newPartName}.SLDPRT";
//EditPartParameters("15-002",
// $@"{RootFolder}\{SubjectDestinationFolder}\{newPartName}",
// new[,]
// {
// {"D1@Эскиз1", type == RoofType.Five || type == RoofType.Six ? Convert.ToString(140 + lengthD + type4) : Convert.ToString(lengthD + type4)},
// {"D2@Эскиз1", Convert.ToString(widthD)},
// {"D4@Эскиз27", Convert.ToString(addwidth2-4.62)},
// {"D1@Эскиз27", Convert.ToString(90)},
// {"D2@Эскиз27", Convert.ToString((75-4.62))},
// {"D2@Эскиз23", type == RoofType.Five || type == RoofType.Six ? Convert.ToString(165) : Convert.ToString(25)},
// {"D1@Кривая2", Convert.ToString(weldW2*1000)},
// {"D1@Кривая1", Convert.ToString(weldW*1000)}
// } );
try
{
VentsMatdll(new[] { "1700" }, new[] { "", "Шаргень", "2" }, newPartName);
}
catch (Exception e)
{
//MessageBox.Show(e.ToString());
}
SolidWorksAdapter.SldWoksAppExemplare.CloseDoc(newPartName);
}
solidWorksDocument = ((ModelDoc2)(SolidWorksAdapter.SldWoksAppExemplare.ActivateDoc2("15-000.SLDASM", true, 0)));
solidWorksDocument.Extension.SelectByID2("15-001-3@15-000", "COMPONENT", 0, 0, 0, false, 0, null, 0);
solidWorksDocument.Extension.SelectByID2("ЗеркальныйКомпонент2@15-000", "COMPPATTERN", 0, 0, 0, false, 0, null, 0);
solidWorksDocument.EditSuppress2();
}
catch (Exception e)
{
Patterns.Observer.MessageObserver.Instance.SetMessage(e.ToString());
}
}
else if (type != RoofType_e.Six)
{
solidWorksDocument = ((ModelDoc2)(SolidWorksAdapter.SldWoksAppExemplare.ActivateDoc2("15-000.SLDASM", true, 0)));
solidWorksDocument.Extension.SelectByID2("15-002-1@15-000", "COMPONENT", 0, 0, 0, false, 0, null, 0);
solidWorksDocument.EditDelete();
}
switch (type)
{
case RoofType_e.Two:
case RoofType_e.Six:
solidWorksDocument.Extension.SelectByID2("Винт самосверл 6-гр.гол с шайбой-33@15-000", "COMPONENT", 0, 0, 0, false, 0, null, 0);
solidWorksDocument.EditDelete();
break;
default:
solidWorksDocument.Extension.SelectByID2("Винт самосверл 6-гр.гол с шайбой-26@15-000", "COMPONENT", 0, 0, 0, false, 0, null, 0);
solidWorksDocument.EditDelete();
break;
}
#endregion
// GabaritsForPaintingCamera(SolidWorksDocument);
try
{
solidWorksDocument.ForceRebuild3(true);
//Console.WriteLine("newRoofPath " + newRoofPath);
solidWorksDocument.SaveAs2(newRoofPath, (int)swSaveAsVersion_e.swSaveAsCurrentVersion, false, true);
newComponents.Add(new FileInfo(newRoofPath));
SolidWorksAdapter.CloseAllDocumentsAndExit();
// PDMWebService.Data.PDM.SolidWorksPdmAdapter.Instance.CheckInOutPdm(newComponents, true);
//Console.WriteLine("RoofBuilder строка 324 пересмотреть CheckInOutPdm");
foreach (var newComponent in ComponentsPathList)
{
// ExportXmlSql.Export(newComponent.FullName);
}
}
catch (Exception ex)
{
Patterns.Observer.MessageObserver.Instance.SetMessage(ex.ToString());
}
if (onlyPath)
{
return(newRoofPath);
}
//MessageBox.Show(newRoofPath, "Модель построена");
return(newRoofPath);
}