Exemplo n.º 1
0
        static void CreateDimples(SolidEdgePart.SheetMetalDocument sheetMetalDocument)
        {
            SolidEdgePart.RefPlanes           refplanes   = null;
            SolidEdgePart.RefPlane            refplane    = null;
            SolidEdgePart.Models              models      = null;
            SolidEdgePart.Model               model       = null;
            SolidEdgePart.ProfileSets         profileSets = null;
            SolidEdgePart.ProfileSet          profileSet  = null;
            SolidEdgePart.Profiles            profiles    = null;
            SolidEdgePart.Profile             profile     = null;
            SolidEdgeFrameworkSupport.Lines2d lines2d     = null;
            SolidEdgeFrameworkSupport.Line2d  line2d      = null;

            //List<SolidEdgePart.Profile> profileList = new List<SolidEdgePart.Profile>();

            // Get a reference to the RefPlanes collection.
            refplanes = sheetMetalDocument.RefPlanes;

            // Get a reference to Right (yz) plane.
            refplane = refplanes.Item(3);

            // Get a reference to the Models collection.
            models = sheetMetalDocument.Models;

            // Get a reference to Model.
            model = models.Item(1);

            // Get a reference to the ProfileSets collection.
            profileSets = sheetMetalDocument.ProfileSets;

            // Add new ProfileSet.
            profileSet = profileSets.Add();

            // Get a reference to the Profiles collection.
            profiles = profileSet.Profiles;

            // Add new Profile.
            profile = profiles.Add(refplane);

            // Draw a line to define the dimple point.
            lines2d = profile.Lines2d;
            line2d  = lines2d.AddBy2Points(0, 0, 0.01, 0);

            // Hide the profile.
            profile.Visible = false;

            double depth = 0.01;

            // Add new dimple.
            model.Dimples.Add(
                Profile: profile,
                Depth: depth,
                ProfileSide: SolidEdgePart.DimpleFeatureConstants.seDimpleDepthLeft,
                DepthSide: SolidEdgePart.DimpleFeatureConstants.seDimpleDepthRight);
        }
Exemplo n.º 2
0
        static void Main(string[] args)
        {
            SolidEdgeFramework.Application   application        = null;
            SolidEdgeFramework.Documents     documents          = null;
            SolidEdgePart.SheetMetalDocument sheetMetalDocument = null;
            SolidEdgePart.RefPlanes          refplanes          = null;
            SolidEdgePart.RefPlane           refplane           = null;
            SolidEdgePart.Model model = null;
            SolidEdgePart.HoleDataCollection holeDataCollection = null;
            SolidEdgePart.ProfileSets        profileSets        = null;
            SolidEdgePart.ProfileSet         profileSet         = null;
            SolidEdgePart.Profiles           profiles           = null;
            SolidEdgePart.Profile            profile            = null;
            SolidEdgePart.Holes2d            holes2d            = null;
            SolidEdgePart.Hole2d             hole2d             = null;
            SolidEdgePart.Holes holes = null;
            SolidEdgePart.Hole  hole  = null;
            long profileStatus        = 0;
            List <SolidEdgePart.Profile> profileList = new List <SolidEdgePart.Profile>();

            SolidEdgePart.UserDefinedPatterns userDefinedPatterns = null;
            SolidEdgePart.UserDefinedPattern  userDefinedPattern  = null;
            SolidEdgeFramework.SelectSet      selectSet           = null;

            try
            {
                // Register with OLE to handle concurrency issues on the current thread.
                SolidEdgeCommunity.OleMessageFilter.Register();

                // Connect to or start Solid Edge.
                application = SolidEdgeCommunity.SolidEdgeUtils.Connect(true, true);

                // Get a reference to the Documents collection.
                documents = application.Documents;

                // Create a new sheetmetal document.
                sheetMetalDocument = documents.AddSheetMetalDocument();

                // Always a good idea to give SE a chance to breathe.
                application.DoIdle();

                // Call helper method to create the actual geometry.
                model = SheetMetalHelper.CreateBaseTabByCircle(sheetMetalDocument);

                // Get a reference to the RefPlanes collection.
                refplanes = sheetMetalDocument.RefPlanes;

                // Get a reference to front RefPlane.
                refplane = refplanes.GetFrontPlane();

                // Get a reference to the ProfileSets collection.
                profileSets = sheetMetalDocument.ProfileSets;

                // Add new ProfileSet.
                profileSet = profileSets.Add();

                // Get a reference to the Profiles collection.
                profiles = profileSet.Profiles;

                // Add new Profile.
                profile = profiles.Add(refplane);

                // Get a reference to the Holes2d collection.
                holes2d = profile.Holes2d;

                // This creates a cross pattern of holes.
                double[,] holeMatrix = new double[, ]
                {
                    //{x, y}
                    { 0.00, 0.00 },
                    { -0.01, 0.00 },
                    { -0.02, 0.00 },
                    { -0.03, 0.00 },
                    { -0.04, 0.00 },
                    { 0.01, 0.00 },
                    { 0.02, 0.00 },
                    { 0.03, 0.00 },
                    { 0.04, 0.00 },
                    { 0.00, -0.01 },
                    { 0.00, -0.02 },
                    { 0.00, -0.03 },
                    { 0.00, -0.04 },
                    { 0.00, 0.01 },
                    { 0.00, 0.02 },
                    { 0.00, 0.03 },
                    { 0.00, 0.04 }
                };

                // Draw the Base Profile.
                for (int i = 0; i <= holeMatrix.GetUpperBound(0); i++)
                {
                    // Add new Hole2d.
                    hole2d = holes2d.Add(
                        XCenter: holeMatrix[i, 0],
                        YCenter: holeMatrix[i, 1]);
                }

                // Hide the profile.
                profile.Visible = false;

                // Close profile.
                profileStatus = profile.End(SolidEdgePart.ProfileValidationType.igProfileClosed);

                // Get a reference to the ProfileSet.
                profileSet = (SolidEdgePart.ProfileSet)profile.Parent;

                // Get a reference to the Profiles collection.
                profiles = profileSet.Profiles;

                // Add profiles to list for AddByProfiles().
                for (int i = 1; i <= profiles.Count; i++)
                {
                    profileList.Add(profiles.Item(i));
                }

                // Get a reference to the HoleDataCollection collection.
                holeDataCollection = sheetMetalDocument.HoleDataCollection;

                // Add new HoleData.
                SolidEdgePart.HoleData holeData = holeDataCollection.Add(
                    HoleType: SolidEdgePart.FeaturePropertyConstants.igRegularHole,
                    HoleDiameter: 0.005,
                    BottomAngle: 90);

                // Get a reference to the Holes collection.
                holes = model.Holes;

                // Add hole.
                hole = holes.AddFinite(
                    Profile: profile,
                    ProfilePlaneSide: SolidEdgePart.FeaturePropertyConstants.igRight,
                    FiniteDepth: 0.005,
                    Data: holeData);

                // Get a reference to the UserDefinedPatterns collection.
                userDefinedPatterns = model.UserDefinedPatterns;

                // Create the user defined pattern.
                userDefinedPattern = userDefinedPatterns.AddByProfiles(
                    NumberOfProfiles: profileList.Count,
                    ProfilesArray: profileList.ToArray(),
                    SeedFeature: hole);

                // Get a reference to the ActiveSelectSet.
                selectSet = application.ActiveSelectSet;

                // Empty ActiveSelectSet.
                selectSet.RemoveAll();

                // Add new UserDefinedPattern to ActiveSelectSet.
                selectSet.Add(userDefinedPattern);

                // Switch to ISO view.
                application.StartCommand(SolidEdgeConstants.SheetMetalCommandConstants.SheetMetalViewISOView);
            }
            catch (System.Exception ex)
            {
                Console.WriteLine(ex.Message);
            }
            finally
            {
                SolidEdgeCommunity.OleMessageFilter.Unregister();
            }
        }
Exemplo n.º 3
0
        static void Main(string[] args)
        {
            SolidEdgeFramework.Application        application  = null;
            SolidEdgeFramework.Documents          documents    = null;
            SolidEdgePart.PartDocument            partDocument = null;
            SolidEdgePart.RefPlanes               refPlanes    = null;
            SolidEdgePart.RefPlane                refPlane     = null;
            SolidEdgePart.ProfileSets             profileSets  = null;
            SolidEdgePart.ProfileSet              profileSet   = null;
            SolidEdgePart.Profiles                profiles     = null;
            SolidEdgePart.Profile                 profile      = null;
            SolidEdgeFrameworkSupport.Lines2d     lines2d      = null;
            SolidEdgeFrameworkSupport.Relations2d relations2d  = null;
            SolidEdgeFramework.SelectSet          selectSet    = null;

            try
            {
                // Register with OLE to handle concurrency issues on the current thread.
                SolidEdgeCommunity.OleMessageFilter.Register();

                // Connect to or start Solid Edge.
                application = SolidEdgeCommunity.SolidEdgeUtils.Connect(true, true);

                // Get a reference to the documents collection.
                documents = application.Documents;

                // Create a new part document.
                partDocument = documents.AddPartDocument();

                // Always a good idea to give SE a chance to breathe.
                application.DoIdle();

                // Get a reference to the RefPlanes collection.
                refPlanes = partDocument.RefPlanes;

                // Get a reference to the top RefPlane using extension method.
                refPlane = refPlanes.GetTopPlane();

                // Get a reference to the ProfileSets collection.
                profileSets = partDocument.ProfileSets;

                // Add a new ProfileSet.
                profileSet = profileSets.Add();

                // Get a reference to the Profiles collection.
                profiles = profileSet.Profiles;

                // Add a new Profile.
                profile = profiles.Add(refPlane);

                // Get a reference to the Relations2d collection.
                relations2d = (SolidEdgeFrameworkSupport.Relations2d)profile.Relations2d;

                // Get a reference to the Lines2d collection.
                lines2d = profile.Lines2d;

                int    sides = 8;
                double angle = 360 / sides;
                angle = (angle * Math.PI) / 180;

                double radius     = .05;
                double lineLength = 2 * radius * (Math.Tan(angle) / 2);

                // x1, y1, x2, y2
                double[] points = { 0.0, 0.0, 0.0, 0.0 };

                double x = 0.0;
                double y = 0.0;

                points[2] = -((Math.Cos(angle / 2) * radius) - x);
                points[3] = -((lineLength / 2) - y);

                // Draw each line.
                for (int i = 0; i < sides; i++)
                {
                    points[0] = points[2];
                    points[1] = points[3];
                    points[2] = points[0] + (Math.Sin(angle * i) * lineLength);
                    points[3] = points[1] + (Math.Cos(angle * i) * lineLength);

                    lines2d.AddBy2Points(points[0], points[1], points[2], points[3]);
                }

                // Create endpoint relationships.
                for (int i = 1; i <= lines2d.Count; i++)
                {
                    if (i == lines2d.Count)
                    {
                        relations2d.AddKeypoint(lines2d.Item(i), (int)SolidEdgeConstants.KeypointIndexConstants.igLineEnd, lines2d.Item(1), (int)SolidEdgeConstants.KeypointIndexConstants.igLineStart);
                    }
                    else
                    {
                        relations2d.AddKeypoint(lines2d.Item(i), (int)SolidEdgeConstants.KeypointIndexConstants.igLineEnd, lines2d.Item(i + 1), (int)SolidEdgeConstants.KeypointIndexConstants.igLineStart);
                        relations2d.AddEqual(lines2d.Item(i), lines2d.Item(i + 1));
                    }
                }

                // Get a reference to the ActiveSelectSet.
                selectSet = application.ActiveSelectSet;

                // Empty ActiveSelectSet.
                selectSet.RemoveAll();

                // Add all lines to ActiveSelectSet.
                for (int i = 1; i <= lines2d.Count; i++)
                {
                    selectSet.Add(lines2d.Item(i));
                }

                // Switch to ISO view.
                application.StartCommand(SolidEdgeConstants.PartCommandConstants.PartViewISOView);
            }
            catch (System.Exception ex)
            {
                Console.WriteLine(ex.Message);
            }
            finally
            {
                SolidEdgeCommunity.OleMessageFilter.Unregister();
            }
        }
        static void Main(string[] args)
        {
            SolidEdgeFramework.Application        application  = null;
            SolidEdgeFramework.Documents          documents    = null;
            SolidEdgePart.PartDocument            partDocument = null;
            SolidEdgePart.RefPlanes               refPlanes    = null;
            SolidEdgePart.RefPlane                refPlane     = null;
            SolidEdgePart.ProfileSets             profileSets  = null;
            SolidEdgePart.ProfileSet              profileSet   = null;
            SolidEdgePart.Profiles                profiles     = null;
            SolidEdgePart.Profile                 profile      = null;
            SolidEdgePart.Models                  models       = null;
            SolidEdgePart.Model                   model        = null;
            SolidEdgeFrameworkSupport.Lines2d     lines2d      = null;
            SolidEdgeFrameworkSupport.Line2d      axis         = null;
            SolidEdgeFrameworkSupport.Arcs2d      arcs2d       = null;
            SolidEdgeFrameworkSupport.Relations2d relations2d  = null;
            SolidEdgePart.RefAxis                 refaxis      = null;
            Array aProfiles = null;

            SolidEdgeGeometry.Edges           edges  = null;
            SolidEdgeGeometry.Circle          circle = null;
            SolidEdgePart.RevolvedProtrusions revolvedProtrusions = null;
            SolidEdgePart.RevolvedProtrusion  revolvedProtrusion  = null;
            Array center = null;

            SolidEdgePart.Rounds rounds = null;

            try
            {
                Console.WriteLine("Registering OleMessageFilter.");

                // Register with OLE to handle concurrency issues on the current thread.
                OleMessageFilter.Register();

                Console.WriteLine("Connecting to Solid Edge.");

                // Connect to or start Solid Edge.
                application = SolidEdgeUtils.Connect(true);

                // Make sure user can see the GUI.
                application.Visible = true;

                // Bring Solid Edge to the foreground.
                application.Activate();

                // Get a reference to the Documents collection.
                documents = application.Documents;

                Console.WriteLine("Creating a new part document.");

                // Create a new PartDocument.
                partDocument = (SolidEdgePart.PartDocument)
                               documents.Add("SolidEdge.PartDocument");

                // Always a good idea to give SE a chance to breathe.
                application.DoIdle();

                Console.WriteLine("Drawing part.");

                // Get a reference to the models collection.
                models = (SolidEdgePart.Models)partDocument.Models;


                // D1 to FA are parameters in a form, introduced by the user.
                double D1 = 0.020;
                double D2 = 0.026;
                double D3 = 0.003;
                double D4 = 0.014;
                double L1 = 0.040;
                double L2 = 0.030;
                double L3 = 0.005;
                double FA = 0.0005; // round

                // Get a reference to the ref planes collection.
                refPlanes = partDocument.RefPlanes;

                // Front (xz).
                refPlane = refPlanes.Item(3);

                // Get a reference to the profile sets collection.
                profileSets = (SolidEdgePart.ProfileSets)partDocument.ProfileSets;

                // Create a new profile set.
                profileSet = profileSets.Add();

                // Get a reference to the profiles collection.
                profiles = profileSet.Profiles;

                // Create a new profile.
                profile = profiles.Add(refPlane);

                // Get a reference to the profile lines2d collection.
                lines2d = profile.Lines2d;

                // Get a reference to the profile arcs2d collection.
                arcs2d = profile.Arcs2d;

                double H = L1 - L2;
                double y = L1 - L3 - (D4 - D3) / (2 * Math.Tan((118 / 2) * (Math.PI / 180)));

                lines2d.AddBy2Points(D3 / 2, 0, D2 / 2, 0);        // Line1
                lines2d.AddBy2Points(D2 / 2, 0, D2 / 2, H);        // Line2
                lines2d.AddBy2Points(D2 / 2, H, D1 / 2, H);        // Line3
                lines2d.AddBy2Points(D1 / 2, H, D1 / 2, L1);       // Line4
                lines2d.AddBy2Points(D1 / 2, L1, D4 / 2, L1);      // Line5
                lines2d.AddBy2Points(D4 / 2, L1, D4 / 2, L1 - L3); // Line6
                lines2d.AddBy2Points(D4 / 2, L1 - L3, D3 / 2, y);  // Line7
                lines2d.AddBy2Points(D3 / 2, y, D3 / 2, 0);        // Line8

                axis = lines2d.AddBy2Points(0, 0, 0, L1);
                profile.ToggleConstruction(axis);

                // relations
                relations2d = (SolidEdgeFrameworkSupport.Relations2d)profile.Relations2d;
                relations2d.AddKeypoint(lines2d.Item(1), (int)SolidEdgeConstants.KeypointIndexConstants.igLineEnd, lines2d.Item(2), (int)SolidEdgeConstants.KeypointIndexConstants.igLineStart, true);
                relations2d.AddKeypoint(lines2d.Item(2), (int)SolidEdgeConstants.KeypointIndexConstants.igLineEnd, lines2d.Item(3), (int)SolidEdgeConstants.KeypointIndexConstants.igLineStart, true);
                relations2d.AddKeypoint(lines2d.Item(3), (int)SolidEdgeConstants.KeypointIndexConstants.igLineEnd, lines2d.Item(4), (int)SolidEdgeConstants.KeypointIndexConstants.igLineStart, true);
                relations2d.AddKeypoint(lines2d.Item(4), (int)SolidEdgeConstants.KeypointIndexConstants.igLineEnd, lines2d.Item(5), (int)SolidEdgeConstants.KeypointIndexConstants.igLineStart, true);
                relations2d.AddKeypoint(lines2d.Item(5), (int)SolidEdgeConstants.KeypointIndexConstants.igLineEnd, lines2d.Item(6), (int)SolidEdgeConstants.KeypointIndexConstants.igLineStart, true);
                relations2d.AddKeypoint(lines2d.Item(6), (int)SolidEdgeConstants.KeypointIndexConstants.igLineEnd, lines2d.Item(7), (int)SolidEdgeConstants.KeypointIndexConstants.igLineStart, true);
                relations2d.AddKeypoint(lines2d.Item(7), (int)SolidEdgeConstants.KeypointIndexConstants.igLineEnd, lines2d.Item(8), (int)SolidEdgeConstants.KeypointIndexConstants.igLineStart, true);
                relations2d.AddKeypoint(lines2d.Item(8), (int)SolidEdgeConstants.KeypointIndexConstants.igLineEnd, lines2d.Item(1), (int)SolidEdgeConstants.KeypointIndexConstants.igLineStart, true);

                refaxis = (SolidEdgePart.RefAxis)profile.SetAxisOfRevolution(axis);

                // Close the profile.
                int status = profile.End(SolidEdgePart.ProfileValidationType.igProfileRefAxisRequired);
                profile.Visible = false;

                // Create a new array of profile objects.
                aProfiles = Array.CreateInstance(typeof(SolidEdgePart.Profile), 1);
                aProfiles.SetValue(profile, 0);

                Console.WriteLine("Creating finite revolved protrusion.");

                // add Finite Revolved Protrusion.
                model = models.AddFiniteRevolvedProtrusion(1, ref aProfiles, refaxis, SolidEdgePart.FeaturePropertyConstants.igRight, 2 * Math.PI, null, null);

                Console.WriteLine("Creating adding rounds.");

                SolidEdgeGeometry.Edge[] arrEdges = { null };
                double[] arrRadii = { FA };

                revolvedProtrusions = model.RevolvedProtrusions;
                revolvedProtrusion  = revolvedProtrusions.Item(1);
                edges = (SolidEdgeGeometry.Edges)revolvedProtrusion.Edges[SolidEdgeGeometry.FeatureTopologyQueryTypeConstants.igQueryAll];

                foreach (SolidEdgeGeometry.Edge edge in edges)
                {
                    circle = (SolidEdgeGeometry.Circle)edge.Geometry;
                    if (circle.Radius == D2 / 2)
                    {
                        center = Array.CreateInstance(typeof(double), 3);
                        circle.GetCenterPoint(ref center);
                        if ((double)center.GetValue(0) == 0 && (double)center.GetValue(1) == 0 && (double)center.GetValue(2) == H)
                        {
                            arrEdges[0] = edge;
                            break;
                        }
                    }
                }

                rounds = model.Rounds;
                object optArg = Type.Missing;
                rounds.Add(1, arrEdges, arrRadii, optArg, optArg, optArg, optArg);

                Console.WriteLine("Switching to ISO view.");

                // Switch to ISO view.
                application.StartCommand((SolidEdgeFramework.SolidEdgeCommandConstants)SolidEdgeConstants.PartCommandConstants.PartViewISOView);
            }
            catch (System.Exception ex)
            {
#if DEBUG
                System.Diagnostics.Debugger.Break();
#endif
                Console.WriteLine(ex.Message);
            }
        }
Exemplo n.º 5
0
    public static SolidEdgePart.Model CreateFiniteRevolvedProtrusion(SolidEdgePart.PartDocument partDocument)
    {
        SolidEdgePart.RefPlanes               refPlanes   = null;
        SolidEdgePart.RefPlane                refPlane    = null;
        SolidEdgePart.ProfileSets             profileSets = null;
        SolidEdgePart.ProfileSet              profileSet  = null;
        SolidEdgePart.Profiles                profiles    = null;
        SolidEdgePart.Profile                 profile     = null;
        SolidEdgePart.Models                  models      = null;
        SolidEdgePart.Model                   model       = null;
        SolidEdgeFrameworkSupport.Lines2d     lines2d     = null;
        SolidEdgeFrameworkSupport.Line2d      axis        = null;
        SolidEdgeFrameworkSupport.Arcs2d      arcs2d      = null;
        SolidEdgeFrameworkSupport.Relations2d relations2d = null;
        SolidEdgePart.RefAxis                 refaxis     = null;
        Array aProfiles = null;

        // Get a reference to the models collection.
        models = (SolidEdgePart.Models)partDocument.Models;

        // D1 to FA are parameters in a form, introduced by the user.
        double D1 = 0.020;
        double D2 = 0.026;
        double D3 = 0.003;
        double D4 = 0.014;
        double L1 = 0.040;
        double L2 = 0.030;
        double L3 = 0.005;

        // Get a reference to the ref planes collection.
        refPlanes = partDocument.RefPlanes;

        // Get a reference to front RefPlane.
        refPlane = refPlanes.GetFrontPlane();

        // Get a reference to the profile sets collection.
        profileSets = (SolidEdgePart.ProfileSets)partDocument.ProfileSets;

        // Create a new profile set.
        profileSet = profileSets.Add();

        // Get a reference to the profiles collection.
        profiles = profileSet.Profiles;

        // Create a new profile.
        profile = profiles.Add(refPlane);

        // Get a reference to the profile lines2d collection.
        lines2d = profile.Lines2d;

        // Get a reference to the profile arcs2d collection.
        arcs2d = profile.Arcs2d;

        double H = L1 - L2;
        double y = L1 - L3 - (D4 - D3) / (2 * Math.Tan((118 / 2) * (Math.PI / 180)));

        lines2d.AddBy2Points(D3 / 2, 0, D2 / 2, 0);        // Line1
        lines2d.AddBy2Points(D2 / 2, 0, D2 / 2, H);        // Line2
        lines2d.AddBy2Points(D2 / 2, H, D1 / 2, H);        // Line3
        lines2d.AddBy2Points(D1 / 2, H, D1 / 2, L1);       // Line4
        lines2d.AddBy2Points(D1 / 2, L1, D4 / 2, L1);      // Line5
        lines2d.AddBy2Points(D4 / 2, L1, D4 / 2, L1 - L3); // Line6
        lines2d.AddBy2Points(D4 / 2, L1 - L3, D3 / 2, y);  // Line7
        lines2d.AddBy2Points(D3 / 2, y, D3 / 2, 0);        // Line8

        axis = lines2d.AddBy2Points(0, 0, 0, L1);
        profile.ToggleConstruction(axis);

        // relations
        relations2d = (SolidEdgeFrameworkSupport.Relations2d)profile.Relations2d;
        relations2d.AddKeypoint(lines2d.Item(1), (int)SolidEdgeConstants.KeypointIndexConstants.igLineEnd, lines2d.Item(2), (int)SolidEdgeConstants.KeypointIndexConstants.igLineStart, true);
        relations2d.AddKeypoint(lines2d.Item(2), (int)SolidEdgeConstants.KeypointIndexConstants.igLineEnd, lines2d.Item(3), (int)SolidEdgeConstants.KeypointIndexConstants.igLineStart, true);
        relations2d.AddKeypoint(lines2d.Item(3), (int)SolidEdgeConstants.KeypointIndexConstants.igLineEnd, lines2d.Item(4), (int)SolidEdgeConstants.KeypointIndexConstants.igLineStart, true);
        relations2d.AddKeypoint(lines2d.Item(4), (int)SolidEdgeConstants.KeypointIndexConstants.igLineEnd, lines2d.Item(5), (int)SolidEdgeConstants.KeypointIndexConstants.igLineStart, true);
        relations2d.AddKeypoint(lines2d.Item(5), (int)SolidEdgeConstants.KeypointIndexConstants.igLineEnd, lines2d.Item(6), (int)SolidEdgeConstants.KeypointIndexConstants.igLineStart, true);
        relations2d.AddKeypoint(lines2d.Item(6), (int)SolidEdgeConstants.KeypointIndexConstants.igLineEnd, lines2d.Item(7), (int)SolidEdgeConstants.KeypointIndexConstants.igLineStart, true);
        relations2d.AddKeypoint(lines2d.Item(7), (int)SolidEdgeConstants.KeypointIndexConstants.igLineEnd, lines2d.Item(8), (int)SolidEdgeConstants.KeypointIndexConstants.igLineStart, true);
        relations2d.AddKeypoint(lines2d.Item(8), (int)SolidEdgeConstants.KeypointIndexConstants.igLineEnd, lines2d.Item(1), (int)SolidEdgeConstants.KeypointIndexConstants.igLineStart, true);

        refaxis = (SolidEdgePart.RefAxis)profile.SetAxisOfRevolution(axis);

        // Close the profile.
        int status = profile.End(SolidEdgePart.ProfileValidationType.igProfileRefAxisRequired);

        profile.Visible = false;

        // Create a new array of profile objects.
        aProfiles = Array.CreateInstance(typeof(SolidEdgePart.Profile), 1);
        aProfiles.SetValue(profile, 0);

        // add Finite Revolved Protrusion.
        model = models.AddFiniteRevolvedProtrusion(
            aProfiles.Length,
            ref aProfiles,
            refaxis,
            SolidEdgePart.FeaturePropertyConstants.igRight,
            2 * Math.PI,
            null,
            null);

        return(model);
    }
Exemplo n.º 6
0
    public static SolidEdgePart.Model CreateFiniteExtrudedProtrusion(SolidEdgePart.PartDocument partDocument, SolidEdgePart.RefPlane refPlane, double[][] linesArray, SolidEdgePart.FeaturePropertyConstants profilePlaneSide, double extrusionDistance)
    {
        SolidEdgePart.ProfileSets             profileSets = null;
        SolidEdgePart.ProfileSet              profileSet  = null;
        SolidEdgePart.Profiles                profiles    = null;
        SolidEdgePart.Profile                 profile     = null;
        SolidEdgeFrameworkSupport.Relations2d relations2d = null;
        SolidEdgeFrameworkSupport.Relation2d  relation2d  = null;
        SolidEdgeFrameworkSupport.Lines2d     lines2d     = null;
        SolidEdgeFrameworkSupport.Line2d      line2d      = null;
        SolidEdgePart.Models models    = null;
        SolidEdgePart.Model  model     = null;
        System.Array         aProfiles = null;

        // Get a reference to the profile sets collection.
        profileSets = partDocument.ProfileSets;

        // Add a new profile set.
        profileSet = profileSets.Add();

        // Get a reference to the profiles collection.
        profiles = profileSet.Profiles;

        // Add a new profile.
        profile = profiles.Add(refPlane);

        // Get a reference to the lines2d collection.
        lines2d = profile.Lines2d;

        // Draw the Base Profile.
        for (int i = 0; i <= linesArray.GetUpperBound(0); i++)
        {
            line2d = lines2d.AddBy2Points(
                x1: linesArray[i][0],
                y1: linesArray[i][1],
                x2: linesArray[i][2],
                y2: linesArray[i][3]);
        }

        // Define Relations among the Line objects to make the Profile closed.
        relations2d = (SolidEdgeFrameworkSupport.Relations2d)profile.Relations2d;

        // Connect all of the lines.
        for (int i = 1; i <= lines2d.Count; i++)
        {
            int j = i + 1;

            // When we reach the last line, wrap around and connect it to the first line.
            if (j > lines2d.Count)
            {
                j = 1;
            }

            relation2d = relations2d.AddKeypoint(
                Object1: lines2d.Item(i),
                Index1: (int)SolidEdgeConstants.KeypointIndexConstants.igLineEnd,
                Object2: lines2d.Item(j),
                Index2: (int)SolidEdgeConstants.KeypointIndexConstants.igLineStart,
                guaranteed_ok: true);
        }

        // Close the profile.
        profile.End(SolidEdgePart.ProfileValidationType.igProfileClosed);

        // Hide the profile.
        profile.Visible = false;

        // Create a new array of profile objects.
        aProfiles = Array.CreateInstance(typeof(SolidEdgePart.Profile), 1);
        aProfiles.SetValue(profile, 0);

        // Get a reference to the models collection.
        models = partDocument.Models;

        // Create the extended protrusion.
        model = models.AddFiniteExtrudedProtrusion(
            NumberOfProfiles: aProfiles.Length,
            ProfileArray: ref aProfiles,
            ProfilePlaneSide: profilePlaneSide,
            ExtrusionDistance: extrusionDistance);

        return(model);
    }
Exemplo n.º 7
0
    public static SolidEdgePart.Model CreateSweptProtrusion(SolidEdgePart.PartDocument partDocument)
    {
        SolidEdgePart.Models                models        = null;
        SolidEdgePart.Model                 model         = null;
        SolidEdgePart.Sketchs               sketches      = null;
        SolidEdgePart.Sketch                sketch        = null;
        SolidEdgePart.RefPlanes             refPlanes     = null;
        SolidEdgePart.RefPlane              refPlane      = null;
        SolidEdgePart.ProfileSets           profileSets   = null;
        SolidEdgePart.ProfileSet            profileSet    = null;
        SolidEdgePart.Profiles              profiles      = null;
        SolidEdgePart.Profile               sketchProfile = null;
        SolidEdgePart.Profile               profile       = null;
        SolidEdgeFrameworkSupport.Circles2d circles2d     = null;

        List <SolidEdgePart.Profile> listPaths = new List <SolidEdgePart.Profile>();
        List <SolidEdgePart.FeaturePropertyConstants> listPathTypes = new List <SolidEdgePart.FeaturePropertyConstants>();
        List <SolidEdgePart.Profile> listSections = new List <SolidEdgePart.Profile>();
        List <SolidEdgePart.FeaturePropertyConstants> listSectionTypes = new List <SolidEdgePart.FeaturePropertyConstants>();
        List <int> listOrigins = new List <int>();

        // Get a reference to the models collection.
        models = (SolidEdgePart.Models)partDocument.Models;

        // Get a reference to the Sketches collections.
        sketches = (SolidEdgePart.Sketchs)partDocument.Sketches;

        // Get a reference to the profile sets collection.
        profileSets = (SolidEdgePart.ProfileSets)partDocument.ProfileSets;

        // Get a reference to the ref planes collection.
        refPlanes = (SolidEdgePart.RefPlanes)partDocument.RefPlanes;

        // Get a reference to front RefPlane.
        refPlane = refPlanes.GetFrontPlane();

        // Add a new sketch.
        sketch = (SolidEdgePart.Sketch)sketches.Add();

        // Add profile for sketch on specified refplane.
        sketchProfile = sketch.Profiles.Add(refPlane);

        // Get a reference to the Circles2d collection.
        circles2d = sketchProfile.Circles2d;

        // Draw the Base Profile.
        circles2d.AddByCenterRadius(0, 0, 0.02);

        // Close the profile.
        sketchProfile.End(SolidEdgePart.ProfileValidationType.igProfileClosed);

        // Arrays for AddSweptProtrusion().
        listPaths.Add(sketchProfile);
        listPathTypes.Add(SolidEdgePart.FeaturePropertyConstants.igProfileBasedCrossSection);

        // NOTE: profile is the Curve.
        refPlane = refPlanes.AddNormalToCurve(
            sketchProfile,
            SolidEdgePart.ReferenceElementConstants.igCurveEnd,
            refPlanes.GetFrontPlane(),
            SolidEdgePart.ReferenceElementConstants.igPivotEnd,
            true,
            System.Reflection.Missing.Value);

        // Add a new profile set.
        profileSet = (SolidEdgePart.ProfileSet)profileSets.Add();

        // Get a reference to the profiles collection.
        profiles = (SolidEdgePart.Profiles)profileSet.Profiles;

        // add a new profile.
        profile = (SolidEdgePart.Profile)profiles.Add(refPlane);

        // Get a reference to the Circles2d collection.
        circles2d = profile.Circles2d;

        // Draw the Base Profile.
        circles2d.AddByCenterRadius(0, 0, 0.01);

        // Close the profile.
        profile.End(SolidEdgePart.ProfileValidationType.igProfileClosed);

        // Arrays for AddSweptProtrusion().
        listSections.Add(profile);
        listSectionTypes.Add(SolidEdgePart.FeaturePropertyConstants.igProfileBasedCrossSection);
        listOrigins.Add(0); //Use 0 for closed profiles.

        // Create the extended protrusion.
        model = models.AddSweptProtrusion(
            listPaths.Count,
            listPaths.ToArray(),
            listPathTypes.ToArray(),
            listSections.Count,
            listSections.ToArray(),
            listSectionTypes.ToArray(),
            listOrigins.ToArray(),
            0,
            SolidEdgePart.FeaturePropertyConstants.igLeft,
            SolidEdgePart.FeaturePropertyConstants.igNone,
            0.0,
            null,
            SolidEdgePart.FeaturePropertyConstants.igNone,
            0.0,
            null);

        // Hide profiles.
        sketchProfile.Visible = false;
        profile.Visible       = false;

        return(model);
    }
Exemplo n.º 8
0
    public static void CreateHolesWithUserDefinedPattern(SolidEdgePart.PartDocument partDocument)
    {
        SolidEdgePart.RefPlanes          refplanes          = null;
        SolidEdgePart.RefPlane           refplane           = null;
        SolidEdgePart.Models             models             = null;
        SolidEdgePart.Model              model              = null;
        SolidEdgePart.HoleDataCollection holeDataCollection = null;
        SolidEdgePart.ProfileSets        profileSets        = null;
        SolidEdgePart.ProfileSet         profileSet         = null;
        SolidEdgePart.Profiles           profiles           = null;
        SolidEdgePart.Profile            profile            = null;
        SolidEdgePart.Holes2d            holes2d            = null;
        SolidEdgePart.Hole2d             hole2d             = null;
        SolidEdgePart.Holes              holes              = null;
        SolidEdgePart.Hole hole = null;
        long profileStatus      = 0;
        List <SolidEdgePart.Profile> profileList = new List <SolidEdgePart.Profile>();

        SolidEdgePart.UserDefinedPatterns userDefinedPatterns = null;
        SolidEdgePart.UserDefinedPattern  userDefinedPattern  = null;

        // Get a reference to the RefPlanes collection.
        refplanes = partDocument.RefPlanes;

        // Get a reference to front RefPlane.
        refplane = refplanes.GetFrontPlane();

        List <double[]> linesArray = new List <double[]>();

        linesArray.Add(new double[] { 0, 0, 0.08, 0 });
        linesArray.Add(new double[] { 0.08, 0, 0.08, 0.06 });
        linesArray.Add(new double[] { 0.08, 0.06, 0.064, 0.06 });
        linesArray.Add(new double[] { 0.064, 0.06, 0.064, 0.02 });
        linesArray.Add(new double[] { 0.064, 0.02, 0.048, 0.02 });
        linesArray.Add(new double[] { 0.048, 0.02, 0.048, 0.06 });
        linesArray.Add(new double[] { 0.048, 0.06, 0.032, 0.06 });
        linesArray.Add(new double[] { 0.032, 0.06, 0.032, 0.02 });
        linesArray.Add(new double[] { 0.032, 0.02, 0.016, 0.02 });
        linesArray.Add(new double[] { 0.016, 0.02, 0.016, 0.06 });
        linesArray.Add(new double[] { 0.016, 0.06, 0, 0.06 });
        linesArray.Add(new double[] { 0, 0.06, 0, 0 });

        // Call helper method to create the actual geometry.
        CreateFiniteExtrudedProtrusion(partDocument, refplane, linesArray.ToArray(), SolidEdgePart.FeaturePropertyConstants.igRight, 0.005);

        // Get a reference to the Models collection.
        models = partDocument.Models;

        // Get a reference to Model.
        model = models.Item(1);

        // Get a reference to the ProfileSets collection.
        profileSets = partDocument.ProfileSets;

        // Add new ProfileSet.
        profileSet = profileSets.Add();

        // Get a reference to the Profiles collection.
        profiles = profileSet.Profiles;

        // Add new Profile.
        profile = profiles.Add(refplane);

        // Get a reference to the Holes2d collection.
        holes2d = profile.Holes2d;

        double[,] holeMatrix = new double[, ]
        {
            //{x, y}
            { 0.01, 0.01 },
            { 0.02, 0.01 },
            { 0.03, 0.01 },
            { 0.04, 0.01 },
            { 0.05, 0.01 },
            { 0.06, 0.01 },
            { 0.07, 0.01 }
        };

        // Draw the Base Profile.
        for (int i = 0; i <= holeMatrix.GetUpperBound(0); i++)
        {
            // Add new Hole2d.
            hole2d = holes2d.Add(
                XCenter: holeMatrix[i, 0],
                YCenter: holeMatrix[i, 1]);
        }

        // Hide the profile.
        profile.Visible = false;

        // Close profile.
        profileStatus = profile.End(SolidEdgePart.ProfileValidationType.igProfileClosed);

        // Get a reference to the ProfileSet.
        profileSet = (SolidEdgePart.ProfileSet)profile.Parent;

        // Get a reference to the Profiles collection.
        profiles = profileSet.Profiles;

        // Add profiles to list for AddByProfiles().
        for (int i = 1; i <= profiles.Count; i++)
        {
            profileList.Add(profiles.Item(i));
        }

        // Get a reference to the HoleDataCollection collection.
        holeDataCollection = partDocument.HoleDataCollection;

        // Add new HoleData.
        SolidEdgePart.HoleData holeData = holeDataCollection.Add(
            HoleType: SolidEdgePart.FeaturePropertyConstants.igRegularHole,
            HoleDiameter: 0.005,
            BottomAngle: 90);

        // Get a reference to the Holes collection.
        holes = model.Holes;

        // Add hole.
        hole = holes.AddFinite(
            Profile: profile,
            ProfilePlaneSide: SolidEdgePart.FeaturePropertyConstants.igRight,
            FiniteDepth: 0.005,
            Data: holeData);

        // Get a reference to the UserDefinedPatterns collection.
        userDefinedPatterns = model.UserDefinedPatterns;

        // Create the user defined pattern.
        userDefinedPattern = userDefinedPatterns.AddByProfiles(
            NumberOfProfiles: profileList.Count,
            ProfilesArray: profileList.ToArray(),
            SeedFeature: hole);
    }
        static void CreateFiniteExtrudedProtrusion(SolidEdgePart.PartDocument partDocument)
        {
            SolidEdgePart.ProfileSets             profileSets = null;
            SolidEdgePart.ProfileSet              profileSet  = null;
            SolidEdgePart.Profiles                profiles    = null;
            SolidEdgePart.Profile                 profile     = null;
            SolidEdgePart.RefPlanes               refplanes   = null;
            SolidEdgeFrameworkSupport.Relations2d relations2d = null;
            SolidEdgeFrameworkSupport.Relation2d  relation2d  = null;
            SolidEdgeFrameworkSupport.Lines2d     lines2d     = null;
            SolidEdgeFrameworkSupport.Line2d      line2d      = null;
            SolidEdgePart.Models models    = null;
            SolidEdgePart.Model  model     = null;
            System.Array         aProfiles = null;

            // Get a reference to the profile sets collection.
            profileSets = partDocument.ProfileSets;

            // Add a new profile set.
            profileSet = profileSets.Add();

            // Get a reference to the profiles collection.
            profiles = profileSet.Profiles;

            // Get a reference to the ref planes collection.
            refplanes = partDocument.RefPlanes;

            // Add a new profile.
            profile = profiles.Add(refplanes.Item(3));

            // Get a reference to the lines2d collection.
            lines2d = profile.Lines2d;

            // UOM = meters.
            double[,] lineMatrix = new double[, ]
            {
                //{x1, y1, x2, y2}
                { 0, 0, 0.08, 0 },
                { 0.08, 0, 0.08, 0.06 },
                { 0.08, 0.06, 0.064, 0.06 },
                { 0.064, 0.06, 0.064, 0.02 },
                { 0.064, 0.02, 0.048, 0.02 },
                { 0.048, 0.02, 0.048, 0.06 },
                { 0.048, 0.06, 0.032, 0.06 },
                { 0.032, 0.06, 0.032, 0.02 },
                { 0.032, 0.02, 0.016, 0.02 },
                { 0.016, 0.02, 0.016, 0.06 },
                { 0.016, 0.06, 0, 0.06 },
                { 0, 0.06, 0, 0 }
            };

            // Draw the Base Profile.
            for (int i = 0; i <= lineMatrix.GetUpperBound(0); i++)
            {
                line2d = lines2d.AddBy2Points(
                    x1: lineMatrix[i, 0],
                    y1: lineMatrix[i, 1],
                    x2: lineMatrix[i, 2],
                    y2: lineMatrix[i, 3]);
            }

            // Define Relations among the Line objects to make the Profile closed.
            relations2d = (SolidEdgeFrameworkSupport.Relations2d)profile.Relations2d;

            // Connect all of the lines.
            for (int i = 1; i <= lines2d.Count; i++)
            {
                int j = i + 1;

                // When we reach the last line, wrap around and connect it to the first line.
                if (j > lines2d.Count)
                {
                    j = 1;
                }

                relation2d = relations2d.AddKeypoint(
                    Object1: lines2d.Item(i),
                    Index1: (int)SolidEdgeConstants.KeypointIndexConstants.igLineEnd,
                    Object2: lines2d.Item(j),
                    Index2: (int)SolidEdgeConstants.KeypointIndexConstants.igLineStart,
                    guaranteed_ok: true);
            }

            // Close the profile.
            profile.End(SolidEdgePart.ProfileValidationType.igProfileClosed);

            // Hide the profile.
            profile.Visible = false;

            // Create a new array of profile objects.
            aProfiles = Array.CreateInstance(typeof(SolidEdgePart.Profile), 1);
            aProfiles.SetValue(profile, 0);

            // Get a reference to the models collection.
            models = partDocument.Models;

            Console.WriteLine("Creating finite extruded protrusion.");

            // Create the extended protrusion.
            model = models.AddFiniteExtrudedProtrusion(
                NumberOfProfiles: aProfiles.Length,
                ProfileArray: ref aProfiles,
                ProfilePlaneSide: SolidEdgePart.FeaturePropertyConstants.igRight,
                ExtrusionDistance: 0.005);
        }
Exemplo n.º 10
0
        static void Main(string[] args)
        {
            SolidEdgeFramework.Application        application  = null;
            SolidEdgeFramework.Documents          documents    = null;
            SolidEdgePart.PartDocument            partDocument = null;
            SolidEdgePart.RefPlanes               refPlanes    = null;
            SolidEdgePart.RefPlane                refPlane     = null;
            SolidEdgePart.ProfileSets             profileSets  = null;
            SolidEdgePart.ProfileSet              profileSet   = null;
            SolidEdgePart.Profiles                profiles     = null;
            SolidEdgePart.Profile                 profile      = null;
            SolidEdgeFrameworkSupport.Lines2d     lines2d      = null;
            SolidEdgeFrameworkSupport.Line2d      line2d       = null;
            SolidEdgeFrameworkSupport.Relations2d relations2d  = null;
            SolidEdgeFrameworkSupport.Relation2d  relation2d   = null;
            SolidEdgePart.Models         models      = null;
            SolidEdgePart.Model          model       = null;
            List <SolidEdgePart.Profile> profileList = new List <SolidEdgePart.Profile>();
            int status = 0;

            SolidEdgePart.ExtrudedProtrusions extrudedProtrusions = null;
            SolidEdgePart.ExtrudedProtrusion  extrudedProtrusion  = null;
            SolidEdgeGeometry.Edges           edges = null;
            List <object> edgeList = new List <object>();

            SolidEdgeGeometry.Faces faces    = null;
            SolidEdgePart.Chamfers  chamfers = null;
            SolidEdgePart.Chamfer   chamfer  = null;

            try
            {
                // Register with OLE to handle concurrency issues on the current thread.
                SolidEdgeCommunity.OleMessageFilter.Register();

                // Connect to or start Solid Edge.
                application = SolidEdgeCommunity.SolidEdgeUtils.Connect(true, true);

                // Bring Solid Edge to the foreground.
                application.Activate();

                // Get a reference to the documents collection.
                documents = application.Documents;

                // Create a new part document.
                partDocument = documents.AddPartDocument();

                // Always a good idea to give SE a chance to breathe.
                application.DoIdle();

                refPlanes = partDocument.RefPlanes;
                refPlane  = refPlanes.Item(1);

                profileSets = partDocument.ProfileSets;
                profileSet  = profileSets.Add();

                profiles = profileSet.Profiles;
                profile  = profiles.Add(refPlane);
                profileList.Add(profile);

                lines2d = profile.Lines2d;
                line2d  = lines2d.AddBy2Points(0, 0, 0.06, 0);
                line2d  = lines2d.AddBy2Points(0.06, 0, 0.06, 0.06);
                line2d  = lines2d.AddBy2Points(0.06, 0.06, 0, 0.06);
                line2d  = lines2d.AddBy2Points(0, 0.06, 0, 0);

                relations2d = (SolidEdgeFrameworkSupport.Relations2d)profile.Relations2d;
                relation2d  = relations2d.AddKeypoint(
                    Object1: lines2d.Item(1),
                    Index1: (int)SolidEdgeConstants.KeypointIndexConstants.igLineEnd,
                    Object2: lines2d.Item(2),
                    Index2: (int)SolidEdgeConstants.KeypointIndexConstants.igLineStart);

                relation2d = relations2d.AddKeypoint(
                    Object1: lines2d.Item(2),
                    Index1: (int)SolidEdgeConstants.KeypointIndexConstants.igLineEnd,
                    Object2: lines2d.Item(3),
                    Index2: (int)SolidEdgeConstants.KeypointIndexConstants.igLineStart);

                relation2d = relations2d.AddKeypoint(
                    Object1: lines2d.Item(3),
                    Index1: (int)SolidEdgeConstants.KeypointIndexConstants.igLineEnd,
                    Object2: lines2d.Item(4),
                    Index2: (int)SolidEdgeConstants.KeypointIndexConstants.igLineStart);

                relation2d = relations2d.AddKeypoint(
                    Object1: lines2d.Item(4),
                    Index1: (int)SolidEdgeConstants.KeypointIndexConstants.igLineEnd,
                    Object2: lines2d.Item(1),
                    Index2: (int)SolidEdgeConstants.KeypointIndexConstants.igLineStart);

                // Make sure profile is closed.
                status = profile.End(SolidEdgePart.ProfileValidationType.igProfileClosed);

                if (status != 0)
                {
                    throw new System.Exception("Profile not closed.");
                }

                models = partDocument.Models;

                model = models.AddFiniteExtrudedProtrusion(
                    NumberOfProfiles: profileList.Count,
                    ProfileArray: profileList.ToArray(),
                    ProfilePlaneSide: SolidEdgePart.FeaturePropertyConstants.igRight,
                    ExtrusionDistance: 0.02);

                profile.Visible = false;

                extrudedProtrusions = model.ExtrudedProtrusions;
                extrudedProtrusion  = extrudedProtrusions.Item(1);

                //edges = (SolidEdgeGeometry.Edges)extrudedProtrusion.get_Edges(
                //    SolidEdgeGeometry.FeatureTopologyQueryTypeConstants.igQueryAll);

                //edgeList.Add(edges.Item(5));
                //edgeList.Add(edges.Item(8));

                faces = (SolidEdgeGeometry.Faces)
                        extrudedProtrusion.get_Faces(SolidEdgeGeometry.FeatureTopologyQueryTypeConstants.igQueryAll);

                chamfers = model.Chamfers;

                SolidEdgeGeometry.Face face = (SolidEdgeGeometry.Face)faces.Item(1);
                double setbackDistance1     = 0.009;
                double setbackDistance2     = 0.001;

                edges = (SolidEdgeGeometry.Edges)face.Edges;
                edgeList.Add(edges.Item(1));

                chamfer = chamfers.AddUnequalSetback(
                    ReferenceFace: face,
                    NumberOfEdgeSets: edgeList.Count,
                    EdgeSetArray: edgeList.ToArray(),
                    SetbackDistance1: setbackDistance1,
                    SetbackDistance2: setbackDistance2);

                // Switch to ISO view.
                application.StartCommand(SolidEdgeConstants.PartCommandConstants.PartViewISOView);
            }
            catch (System.Exception ex)
            {
                Console.WriteLine(ex.Message);
            }
            finally
            {
                SolidEdgeCommunity.OleMessageFilter.Unregister();
            }
        }
        static void CreateBaseTab(SolidEdgePart.SheetMetalDocument sheetMetalDocument)
        {
            SolidEdgePart.ProfileSets             profileSets = null;
            SolidEdgePart.ProfileSet              profileSet  = null;
            SolidEdgePart.Profiles                profiles    = null;
            SolidEdgePart.Profile                 profile     = null;
            SolidEdgePart.RefPlanes               refplanes   = null;
            SolidEdgeFrameworkSupport.Relations2d relations2d = null;
            SolidEdgeFrameworkSupport.Relation2d  relation2d  = null;
            SolidEdgeFrameworkSupport.Lines2d     lines2d     = null;
            SolidEdgeFrameworkSupport.Line2d      line2d      = null;
            SolidEdgePart.Models models = null;
            SolidEdgePart.Model  model  = null;

            // Get a reference to the profile sets collection.
            profileSets = sheetMetalDocument.ProfileSets;

            // Add a new profile set.
            profileSet = profileSets.Add();

            // Get a reference to the profiles collection.
            profiles = profileSet.Profiles;

            // Get a reference to the ref planes collection.
            refplanes = sheetMetalDocument.RefPlanes;

            // Add a new profile.
            profile = profiles.Add(refplanes.Item(1));

            // Get a reference to the lines2d collection.
            lines2d = profile.Lines2d;

            // UOM = meters.
            double[,] lineMatrix = new double[, ]
            {
                //{x1, y1, x2, y2}
                { 0.05, 0.025, 0.05, 0.025 },
                { -0.05, 0.025, -0.05, -0.025 },
                { -0.05, -0.025, 0.05, -0.025 },
                { 0.05, -0.025, 0.05, 0.025 }
            };

            // Draw the Base Profile.
            for (int i = 0; i <= lineMatrix.GetUpperBound(0); i++)
            {
                line2d = lines2d.AddBy2Points(
                    lineMatrix[i, 0],
                    lineMatrix[i, 1],
                    lineMatrix[i, 2],
                    lineMatrix[i, 3]);
            }

            // Define Relations among the Line objects to make the Profile closed.
            relations2d = (SolidEdgeFrameworkSupport.Relations2d)profile.Relations2d;

            // Connect all of the lines.
            for (int i = 1; i <= lines2d.Count; i++)
            {
                int j = i + 1;

                // When we reach the last line, wrap around and connect it to the first line.
                if (j > lines2d.Count)
                {
                    j = 1;
                }

                relation2d = relations2d.AddKeypoint(
                    lines2d.Item(i),
                    (int)SolidEdgeConstants.KeypointIndexConstants.igLineEnd,
                    lines2d.Item(j),
                    (int)SolidEdgeConstants.KeypointIndexConstants.igLineStart,
                    true);
            }

            // Close the profile.
            profile.End(SolidEdgePart.ProfileValidationType.igProfileClosed);

            // Hide the profile.
            profile.Visible = false;

            // Get a reference to the models collection.
            models = sheetMetalDocument.Models;

            // Create the base tab.
            model = models.AddBaseTab(profile, SolidEdgePart.FeaturePropertyConstants.igRight);
        }
Exemplo n.º 12
0
        static void Main(string[] args)
        {
            SolidEdgeFramework.Application application          = null;
            SolidEdgeFramework.Documents   documents            = null;
            SolidEdgePart.PartDocument     partDocument         = null;
            SolidEdgePart.RefPlanes        refPlanes            = null;
            SolidEdgePart.RefPlane         refPlane             = null;
            SolidEdgePart.Models           models               = null;
            SolidEdgePart.Model            model                = null;
            SolidEdgePart.ProfileSets      profileSets          = null;
            SolidEdgePart.ProfileSet       profileSet           = null;
            SolidEdgePart.Profiles         profiles             = null;
            List <SolidEdgePart.Profile>   crossSectionProfiles = new List <SolidEdgePart.Profile>();

            SolidEdgeFrameworkSupport.Lines2d     lines2d     = null;
            SolidEdgeFrameworkSupport.Circles2d   circles2d   = null;
            SolidEdgeFrameworkSupport.Relations2d relations2d = null;
            List <object> OriginArray = new List <object>();

            SolidEdgePart.LoftedCutouts  loftedCutouts = null;
            SolidEdgePart.LoftedCutout   loftedCutout  = null;
            SolidEdgeFramework.SelectSet selectSet     = null;

            try
            {
                // Register with OLE to handle concurrency issues on the current thread.
                SolidEdgeCommunity.OleMessageFilter.Register();

                // Connect to or start Solid Edge.
                application = SolidEdgeCommunity.SolidEdgeUtils.Connect(true, true);

                // Get a reference to the documents collection.
                documents = application.Documents;

                // Create a new part document.
                partDocument = documents.AddPartDocument();

                // Always a good idea to give SE a chance to breathe.
                application.DoIdle();

                // Get a reference to the RefPlanes collection.
                refPlanes = partDocument.RefPlanes;

                // Get a reference to top RefPlane.
                refPlane = refPlanes.GetTopPlane();

                // Get a reference to the ProfileSets collection.
                profileSets = partDocument.ProfileSets;

                // Add new ProfileSet.
                profileSet = profileSets.Add();

                // Get a reference to the Profiles collection.
                profiles = profileSet.Profiles;

                // Get a reference to the Models collection.
                models = partDocument.Models;

                #region Base Profile

                List <double[]> linesArray = new List <double[]>();
                linesArray.Add(new double[] { 0, 0, 0.1, 0 });
                linesArray.Add(new double[] { 0.1, 0, 0.1, 0.1 });
                linesArray.Add(new double[] { 0.1, 0.1, 0, 0.1 });
                linesArray.Add(new double[] { 0, 0.1, 0, 0 });

                // Call helper method to create the actual geometry.
                model = PartHelper.CreateFiniteExtrudedProtrusion(partDocument, refPlane, linesArray.ToArray(), SolidEdgePart.FeaturePropertyConstants.igRight, 0.1);

                #endregion

                #region CrossSection Profile #1

                refPlane = refPlanes.AddParallelByDistance(
                    ParentPlane: refPlanes.GetRightPlane(),
                    Distance: 0.1,
                    NormalSide: SolidEdgePart.ReferenceElementConstants.igNormalSide,
                    Local: true);

                // Add new ProfileSet.
                profileSet = profileSets.Add();

                // Get a reference to the Profiles collection.
                profiles = profileSet.Profiles;

                crossSectionProfiles.Add(profiles.Add(refPlane));

                OriginArray.Add(new double[] { 0.03, 0.03 });

                lines2d = crossSectionProfiles[0].Lines2d;
                lines2d.AddBy2Points(0.03, 0.03, 0.07, 0.03);
                lines2d.AddBy2Points(0.07, 0.03, 0.07, 0.07);
                lines2d.AddBy2Points(0.07, 0.07, 0.03, 0.07);
                lines2d.AddBy2Points(0.03, 0.07, 0.03, 0.03);

                relations2d = (SolidEdgeFrameworkSupport.Relations2d)crossSectionProfiles[0].Relations2d;

                relations2d.AddKeypoint(lines2d.Item(1), (int)SolidEdgeConstants.KeypointIndexConstants.igLineEnd, lines2d.Item(2), (int)SolidEdgeConstants.KeypointIndexConstants.igLineStart);
                relations2d.AddKeypoint(lines2d.Item(2), (int)SolidEdgeConstants.KeypointIndexConstants.igLineEnd, lines2d.Item(3), (int)SolidEdgeConstants.KeypointIndexConstants.igLineStart);
                relations2d.AddKeypoint(lines2d.Item(3), (int)SolidEdgeConstants.KeypointIndexConstants.igLineEnd, lines2d.Item(4), (int)SolidEdgeConstants.KeypointIndexConstants.igLineStart);
                relations2d.AddKeypoint(lines2d.Item(4), (int)SolidEdgeConstants.KeypointIndexConstants.igLineEnd, lines2d.Item(1), (int)SolidEdgeConstants.KeypointIndexConstants.igLineStart);

                crossSectionProfiles[0].End(SolidEdgePart.ProfileValidationType.igProfileClosed);

                crossSectionProfiles[0].Visible = false;

                #endregion

                #region CrossSection Profile #2

                refPlane = refPlanes.AddParallelByDistance(
                    ParentPlane: refPlanes.GetRightPlane(),
                    Distance: 0.05,
                    NormalSide: SolidEdgePart.ReferenceElementConstants.igNormalSide,
                    Local: true);
                // Add new ProfileSet.
                profileSet = profileSets.Add();

                // Get a reference to the Profiles collection.
                profiles = profileSet.Profiles;

                crossSectionProfiles.Add(profiles.Add(refPlane));

                OriginArray.Add(new double[] { 0.0, 0.0 });

                circles2d = crossSectionProfiles[1].Circles2d;
                circles2d.AddByCenterRadius(0.05, 0.05, 0.015);

                crossSectionProfiles[1].End(SolidEdgePart.ProfileValidationType.igProfileClosed);

                crossSectionProfiles[1].Visible = false;

                #endregion

                #region CrossSection Profile #3

                refPlane = refPlanes.AddParallelByDistance(
                    ParentPlane: refPlanes.GetRightPlane(),
                    Distance: 0,
                    NormalSide: SolidEdgePart.ReferenceElementConstants.igNormalSide,
                    Local: true);

                // Add new ProfileSet.
                profileSet = profileSets.Add();

                // Get a reference to the Profiles collection.
                profiles = profileSet.Profiles;

                crossSectionProfiles.Add(profiles.Add(refPlane));

                OriginArray.Add(new double[] { 0.03, 0.03 });

                lines2d = crossSectionProfiles[2].Lines2d;
                lines2d.AddBy2Points(0.03, 0.03, 0.07, 0.03);
                lines2d.AddBy2Points(0.07, 0.03, 0.07, 0.07);
                lines2d.AddBy2Points(0.07, 0.07, 0.03, 0.07);
                lines2d.AddBy2Points(0.03, 0.07, 0.03, 0.03);

                relations2d = (SolidEdgeFrameworkSupport.Relations2d)crossSectionProfiles[2].Relations2d;

                relations2d.AddKeypoint(lines2d.Item(1), (int)SolidEdgeConstants.KeypointIndexConstants.igLineEnd, lines2d.Item(2), (int)SolidEdgeConstants.KeypointIndexConstants.igLineStart);
                relations2d.AddKeypoint(lines2d.Item(2), (int)SolidEdgeConstants.KeypointIndexConstants.igLineEnd, lines2d.Item(3), (int)SolidEdgeConstants.KeypointIndexConstants.igLineStart);
                relations2d.AddKeypoint(lines2d.Item(3), (int)SolidEdgeConstants.KeypointIndexConstants.igLineEnd, lines2d.Item(4), (int)SolidEdgeConstants.KeypointIndexConstants.igLineStart);
                relations2d.AddKeypoint(lines2d.Item(4), (int)SolidEdgeConstants.KeypointIndexConstants.igLineEnd, lines2d.Item(1), (int)SolidEdgeConstants.KeypointIndexConstants.igLineStart);

                crossSectionProfiles[2].End(SolidEdgePart.ProfileValidationType.igProfileClosed);

                crossSectionProfiles[2].Visible = false;

                #endregion

                // Get a reference to the LoftedCutouts collection.
                loftedCutouts = model.LoftedCutouts;

                // Build cross section type array.
                List <object> crossSectionTypes = new List <object>();
                crossSectionTypes.Add(SolidEdgePart.FeaturePropertyConstants.igProfileBasedCrossSection);
                crossSectionTypes.Add(SolidEdgePart.FeaturePropertyConstants.igProfileBasedCrossSection);
                crossSectionTypes.Add(SolidEdgePart.FeaturePropertyConstants.igProfileBasedCrossSection);

                // Create the lofted cutout.
                loftedCutout = loftedCutouts.AddSimple(crossSectionProfiles.Count,
                                                       crossSectionProfiles.ToArray(),
                                                       crossSectionTypes.ToArray(),
                                                       OriginArray.ToArray(),
                                                       SolidEdgePart.FeaturePropertyConstants.igLeft,
                                                       SolidEdgePart.FeaturePropertyConstants.igNone,
                                                       SolidEdgePart.FeaturePropertyConstants.igNone);

                // Get a reference to the ActiveSelectSet.
                selectSet = application.ActiveSelectSet;

                // Empty ActiveSelectSet.
                selectSet.RemoveAll();

                // Add new LoftedCutout to ActiveSelectSet.
                selectSet.Add(loftedCutout);

                // Switch to ISO view.
                application.StartCommand(SolidEdgeConstants.PartCommandConstants.PartViewISOView);
            }
            catch (System.Exception ex)
            {
                Console.WriteLine(ex.Message);
            }
            finally
            {
                SolidEdgeCommunity.OleMessageFilter.Unregister();
            }
        }
        static void CreateHolesWithUserDefinedPattern(SolidEdgePart.SheetMetalDocument sheetMetalDocument)
        {
            SolidEdgePart.RefPlanes          refplanes          = null;
            SolidEdgePart.RefPlane           refplane           = null;
            SolidEdgePart.Models             models             = null;
            SolidEdgePart.Model              model              = null;
            SolidEdgePart.HoleDataCollection holeDataCollection = null;
            SolidEdgePart.ProfileSets        profileSets        = null;
            SolidEdgePart.ProfileSet         profileSet         = null;
            SolidEdgePart.Profiles           profiles           = null;
            SolidEdgePart.Profile            profile            = null;
            SolidEdgePart.Holes2d            holes2d            = null;
            SolidEdgePart.Hole2d             hole2d             = null;
            SolidEdgePart.Holes              holes              = null;
            SolidEdgePart.Hole hole = null;
            long profileStatus      = 0;
            List <SolidEdgePart.Profile> profileList = new List <SolidEdgePart.Profile>();

            SolidEdgePart.UserDefinedPatterns userDefinedPatterns = null;
            SolidEdgePart.UserDefinedPattern  userDefinedPattern  = null;

            // Get a reference to the RefPlanes collection.
            refplanes = sheetMetalDocument.RefPlanes;

            // Get a reference to Right (yz) plane.
            refplane = refplanes.Item(3);

            // Get a reference to the Models collection.
            models = sheetMetalDocument.Models;

            // Get a reference to Model.
            model = models.Item(1);

            // Get a reference to the ProfileSets collection.
            profileSets = sheetMetalDocument.ProfileSets;

            // Add new ProfileSet.
            profileSet = profileSets.Add();

            // Get a reference to the Profiles collection.
            profiles = profileSet.Profiles;

            // Add new Profile.
            profile = profiles.Add(refplane);

            // Get a reference to the Holes2d collection.
            holes2d = profile.Holes2d;

            // This creates a cross pattern of holes.
            double[,] holeMatrix = new double[, ]
            {
                //{x, y}
                { 0.00, 0.00 },
                { -0.01, 0.00 },
                { -0.02, 0.00 },
                { -0.03, 0.00 },
                { -0.04, 0.00 },
                { 0.01, 0.00 },
                { 0.02, 0.00 },
                { 0.03, 0.00 },
                { 0.04, 0.00 },
                { 0.00, -0.01 },
                { 0.00, -0.02 },
                { 0.00, -0.03 },
                { 0.00, -0.04 },
                { 0.00, 0.01 },
                { 0.00, 0.02 },
                { 0.00, 0.03 },
                { 0.00, 0.04 }
            };

            // Draw the Base Profile.
            for (int i = 0; i <= holeMatrix.GetUpperBound(0); i++)
            {
                // Add new Hole2d.
                hole2d = holes2d.Add(
                    XCenter: holeMatrix[i, 0],
                    YCenter: holeMatrix[i, 1]);
            }

            // Hide the profile.
            profile.Visible = false;

            // Close profile.
            profileStatus = profile.End(SolidEdgePart.ProfileValidationType.igProfileClosed);

            // Get a reference to the ProfileSet.
            profileSet = (SolidEdgePart.ProfileSet)profile.Parent;

            // Get a reference to the Profiles collection.
            profiles = profileSet.Profiles;

            // Add profiles to list for AddByProfiles().
            for (int i = 1; i <= profiles.Count; i++)
            {
                profileList.Add(profiles.Item(i));
            }

            // Get a reference to the HoleDataCollection collection.
            holeDataCollection = sheetMetalDocument.HoleDataCollection;

            // Add new HoleData.
            SolidEdgePart.HoleData holeData = holeDataCollection.Add(
                HoleType: SolidEdgePart.FeaturePropertyConstants.igRegularHole,
                HoleDiameter: 0.005,
                BottomAngle: 90);

            // Get a reference to the Holes collection.
            holes = model.Holes;

            // Add hole.
            hole = holes.AddFinite(
                Profile: profile,
                ProfilePlaneSide: SolidEdgePart.FeaturePropertyConstants.igRight,
                FiniteDepth: 0.005,
                Data: holeData);

            // Get a reference to the UserDefinedPatterns collection.
            userDefinedPatterns = model.UserDefinedPatterns;

            // Create the user defined pattern.
            userDefinedPattern = userDefinedPatterns.AddByProfiles(
                NumberOfProfiles: profileList.Count,
                ProfilesArray: profileList.ToArray(),
                SeedFeature: hole);
        }
Exemplo n.º 14
0
        static void Main(string[] args)
        {
            SolidEdgeFramework.Application   application        = null;
            SolidEdgeFramework.Documents     documents          = null;
            SolidEdgePart.SheetMetalDocument sheetMetalDocument = null;
            SolidEdgePart.RefPlanes          refPlanes          = null;
            SolidEdgePart.RefPlane           refPlane           = null;
            SolidEdgePart.Model               model             = null;
            SolidEdgePart.ProfileSets         profileSets       = null;
            SolidEdgePart.ProfileSet          profileSet        = null;
            SolidEdgePart.Profiles            profiles          = null;
            SolidEdgePart.Profile             profile           = null;
            SolidEdgeFrameworkSupport.Lines2d lines2d           = null;
            SolidEdgeFrameworkSupport.Line2d  line2d            = null;
            SolidEdgePart.Dimple              dimple            = null;
            SolidEdgeFramework.SelectSet      selectSet         = null;

            try
            {
                // Register with OLE to handle concurrency issues on the current thread.
                SolidEdgeCommunity.OleMessageFilter.Register();

                // Connect to or start Solid Edge.
                application = SolidEdgeCommunity.SolidEdgeUtils.Connect(true, true);

                // Get a reference to the Documents collection.
                documents = application.Documents;

                // Create a new sheetmetal document.
                sheetMetalDocument = documents.AddSheetMetalDocument();

                // Always a good idea to give SE a chance to breathe.
                application.DoIdle();

                // Call helper method to create the actual geometry.
                model = SheetMetalHelper.CreateBaseTabByCircle(sheetMetalDocument);

                // Get a reference to the RefPlanes collection.
                refPlanes = sheetMetalDocument.RefPlanes;

                // Get a reference to front RefPlane.
                refPlane = refPlanes.GetFrontPlane();

                // Get a reference to the ProfileSets collection.
                profileSets = sheetMetalDocument.ProfileSets;

                // Add new ProfileSet.
                profileSet = profileSets.Add();

                // Get a reference to the Profiles collection.
                profiles = profileSet.Profiles;

                // Add new Profile.
                profile = profiles.Add(refPlane);

                // Draw a line to define the dimple point.
                lines2d = profile.Lines2d;
                line2d  = lines2d.AddBy2Points(0, 0, 0.01, 0);

                // Hide the profile.
                profile.Visible = false;

                double depth = 0.01;

                // Add new dimple.
                dimple = model.Dimples.Add(
                    Profile: profile,
                    Depth: depth,
                    ProfileSide: SolidEdgePart.DimpleFeatureConstants.seDimpleDepthLeft,
                    DepthSide: SolidEdgePart.DimpleFeatureConstants.seDimpleDepthRight);

                // Get a reference to the ActiveSelectSet.
                selectSet = application.ActiveSelectSet;

                // Empty ActiveSelectSet.
                selectSet.RemoveAll();

                // Add new Dimple to ActiveSelectSet.
                selectSet.Add(dimple);

                // Switch to ISO view.
                application.StartCommand(SolidEdgeConstants.SheetMetalCommandConstants.SheetMetalViewISOView);
            }
            catch (System.Exception ex)
            {
                Console.WriteLine(ex.Message);
            }
            finally
            {
                SolidEdgeCommunity.OleMessageFilter.Unregister();
            }
        }
Exemplo n.º 15
0
        static void Main(string[] args)
        {
            SolidEdgeFramework.Application      application   = null;
            SolidEdgeFramework.Documents        documents     = null;
            SolidEdgePart.PartDocument          partDocument  = null;
            SolidEdgePart.Models                models        = null;
            SolidEdgePart.Model                 model         = null;
            SolidEdgePart.Sketchs               sketches      = null;
            SolidEdgePart.Sketch                sketch        = null;
            SolidEdgePart.RefPlanes             refPlanes     = null;
            SolidEdgePart.RefPlane              refPlane      = null;
            SolidEdgePart.ProfileSets           profileSets   = null;
            SolidEdgePart.ProfileSet            profileSet    = null;
            SolidEdgePart.Profiles              profiles      = null;
            SolidEdgePart.Profile               sketchProfile = null;
            SolidEdgePart.Profile               profile       = null;
            SolidEdgeFrameworkSupport.Circles2d circles2d     = null;

            List <SolidEdgePart.Profile> listPaths = new List <SolidEdgePart.Profile>();
            List <SolidEdgePart.FeaturePropertyConstants> listPathTypes = new List <SolidEdgePart.FeaturePropertyConstants>();
            List <SolidEdgePart.Profile> listSections = new List <SolidEdgePart.Profile>();
            List <SolidEdgePart.FeaturePropertyConstants> listSectionTypes = new List <SolidEdgePart.FeaturePropertyConstants>();
            List <int> listOrigins = new List <int>();

            try
            {
                // Register with OLE to handle concurrency issues on the current thread.
                SolidEdgeCommunity.OleMessageFilter.Register();

                // Connect to or start Solid Edge.
                application = SolidEdgeCommunity.SolidEdgeUtils.Connect(true, true);

                // Get a reference to the Documents collection.
                documents = application.Documents;

                // Create a new PartDocument.
                partDocument = documents.AddPartDocument();

                // Always a good idea to give SE a chance to breathe.
                application.DoIdle();

                // Get a reference to the models collection.
                models = (SolidEdgePart.Models)partDocument.Models;

                // Get a reference to the Sketches collections.
                sketches = (SolidEdgePart.Sketchs)partDocument.Sketches;

                // Get a reference to the profile sets collection.
                profileSets = (SolidEdgePart.ProfileSets)partDocument.ProfileSets;

                // Get a reference to the ref planes collection.
                refPlanes = (SolidEdgePart.RefPlanes)partDocument.RefPlanes;

                // Get a reference to front RefPlane.
                refPlane = refPlanes.GetFrontPlane();

                // Add a new sketch.
                sketch = (SolidEdgePart.Sketch)sketches.Add();

                // Add profile for sketch on specified refplane.
                sketchProfile = sketch.Profiles.Add(refPlane);

                // Get a reference to the Circles2d collection.
                circles2d = sketchProfile.Circles2d;

                // Draw the Base Profile.
                circles2d.AddByCenterRadius(0, 0, 0.02);

                // Close the profile.
                sketchProfile.End(SolidEdgePart.ProfileValidationType.igProfileClosed);

                // Arrays for AddSweptProtrusion().
                listPaths.Add(sketchProfile);
                listPathTypes.Add(SolidEdgePart.FeaturePropertyConstants.igProfileBasedCrossSection);

                // NOTE: profile is the Curve.
                refPlane = refPlanes.AddNormalToCurve(
                    sketchProfile,
                    SolidEdgePart.ReferenceElementConstants.igCurveEnd,
                    refPlanes.GetFrontPlane(),
                    SolidEdgePart.ReferenceElementConstants.igPivotEnd,
                    true,
                    System.Reflection.Missing.Value);

                // Add a new profile set.
                profileSet = (SolidEdgePart.ProfileSet)profileSets.Add();

                // Get a reference to the profiles collection.
                profiles = (SolidEdgePart.Profiles)profileSet.Profiles;

                // add a new profile.
                profile = (SolidEdgePart.Profile)profiles.Add(refPlane);

                // Get a reference to the Circles2d collection.
                circles2d = profile.Circles2d;

                // Draw the Base Profile.
                circles2d.AddByCenterRadius(0, 0, 0.01);

                // Close the profile.
                profile.End(SolidEdgePart.ProfileValidationType.igProfileClosed);

                // Arrays for AddSweptProtrusion().
                listSections.Add(profile);
                listSectionTypes.Add(SolidEdgePart.FeaturePropertyConstants.igProfileBasedCrossSection);
                listOrigins.Add(0); //Use 0 for closed profiles.

                // Create the extended protrusion.
                model = models.AddSweptProtrusion(
                    listPaths.Count,
                    listPaths.ToArray(),
                    listPathTypes.ToArray(),
                    listSections.Count,
                    listSections.ToArray(),
                    listSectionTypes.ToArray(),
                    listOrigins.ToArray(),
                    0,
                    SolidEdgePart.FeaturePropertyConstants.igLeft,
                    SolidEdgePart.FeaturePropertyConstants.igNone,
                    0.0,
                    null,
                    SolidEdgePart.FeaturePropertyConstants.igNone,
                    0.0,
                    null);

                // Hide profiles.
                sketchProfile.Visible = false;
                profile.Visible       = false;

                // Switch to ISO view.
                application.StartCommand(SolidEdgeConstants.PartCommandConstants.PartViewISOView);
            }
            catch (System.Exception ex)
            {
                Console.WriteLine(ex.Message);
            }
            finally
            {
                SolidEdgeCommunity.OleMessageFilter.Unregister();
            }
        }